| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (c) 2011-2021, The Linux Foundation. All rights reserved. |
| */ |
| |
| #include <linux/debugfs.h> |
| #include <linux/device.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/seq_file.h> |
| |
| #include <linux/soc/qcom/smem.h> |
| #include <clocksource/arm_arch_timer.h> |
| |
| #define RPM_DYNAMIC_ADDR 0x14 |
| #define RPM_DYNAMIC_ADDR_MASK 0xFFFF |
| |
| #define STAT_TYPE_OFFSET 0x0 |
| #define COUNT_OFFSET 0x4 |
| #define LAST_ENTERED_AT_OFFSET 0x8 |
| #define LAST_EXITED_AT_OFFSET 0x10 |
| #define ACCUMULATED_OFFSET 0x18 |
| #define CLIENT_VOTES_OFFSET 0x20 |
| |
| struct subsystem_data { |
| const char *name; |
| u32 smem_item; |
| u32 pid; |
| }; |
| |
| static const struct subsystem_data subsystems[] = { |
| { "modem", 605, 1 }, |
| { "wpss", 605, 13 }, |
| { "adsp", 606, 2 }, |
| { "cdsp", 607, 5 }, |
| { "cdsp1", 607, 12 }, |
| { "gpdsp0", 607, 17 }, |
| { "gpdsp1", 607, 18 }, |
| { "slpi", 608, 3 }, |
| { "gpu", 609, 0 }, |
| { "display", 610, 0 }, |
| { "adsp_island", 613, 2 }, |
| { "slpi_island", 613, 3 }, |
| { "apss", 631, QCOM_SMEM_HOST_ANY }, |
| }; |
| |
| struct stats_config { |
| size_t stats_offset; |
| size_t num_records; |
| bool appended_stats_avail; |
| bool dynamic_offset; |
| bool subsystem_stats_in_smem; |
| }; |
| |
| struct stats_data { |
| bool appended_stats_avail; |
| void __iomem *base; |
| }; |
| |
| struct sleep_stats { |
| u32 stat_type; |
| u32 count; |
| u64 last_entered_at; |
| u64 last_exited_at; |
| u64 accumulated; |
| }; |
| |
| struct appended_stats { |
| u32 client_votes; |
| u32 reserved[3]; |
| }; |
| |
| static void qcom_print_stats(struct seq_file *s, const struct sleep_stats *stat) |
| { |
| u64 accumulated = stat->accumulated; |
| /* |
| * If a subsystem is in sleep when reading the sleep stats adjust |
| * the accumulated sleep duration to show actual sleep time. |
| */ |
| if (stat->last_entered_at > stat->last_exited_at) |
| accumulated += arch_timer_read_counter() - stat->last_entered_at; |
| |
| seq_printf(s, "Count: %u\n", stat->count); |
| seq_printf(s, "Last Entered At: %llu\n", stat->last_entered_at); |
| seq_printf(s, "Last Exited At: %llu\n", stat->last_exited_at); |
| seq_printf(s, "Accumulated Duration: %llu\n", accumulated); |
| } |
| |
| static int qcom_subsystem_sleep_stats_show(struct seq_file *s, void *unused) |
| { |
| struct subsystem_data *subsystem = s->private; |
| struct sleep_stats *stat; |
| |
| /* Items are allocated lazily, so lookup pointer each time */ |
| stat = qcom_smem_get(subsystem->pid, subsystem->smem_item, NULL); |
| if (IS_ERR(stat)) |
| return 0; |
| |
| qcom_print_stats(s, stat); |
| |
| return 0; |
| } |
| |
| static int qcom_soc_sleep_stats_show(struct seq_file *s, void *unused) |
| { |
| struct stats_data *d = s->private; |
| void __iomem *reg = d->base; |
| struct sleep_stats stat; |
| |
| memcpy_fromio(&stat, reg, sizeof(stat)); |
| qcom_print_stats(s, &stat); |
| |
| if (d->appended_stats_avail) { |
| struct appended_stats votes; |
| |
| memcpy_fromio(&votes, reg + CLIENT_VOTES_OFFSET, sizeof(votes)); |
| seq_printf(s, "Client Votes: %#x\n", votes.client_votes); |
| } |
| |
| return 0; |
| } |
| |
| DEFINE_SHOW_ATTRIBUTE(qcom_soc_sleep_stats); |
| DEFINE_SHOW_ATTRIBUTE(qcom_subsystem_sleep_stats); |
| |
| static void qcom_create_soc_sleep_stat_files(struct dentry *root, void __iomem *reg, |
| struct stats_data *d, |
| const struct stats_config *config) |
| { |
| char stat_type[sizeof(u32) + 1] = {0}; |
| size_t stats_offset = config->stats_offset; |
| u32 offset = 0, type; |
| int i, j; |
| |
| /* |
| * On RPM targets, stats offset location is dynamic and changes from target |
| * to target and sometimes from build to build for same target. |
| * |
| * In such cases the dynamic address is present at 0x14 offset from base |
| * address in devicetree. The last 16bits indicates the stats_offset. |
| */ |
| if (config->dynamic_offset) { |
| stats_offset = readl(reg + RPM_DYNAMIC_ADDR); |
| stats_offset &= RPM_DYNAMIC_ADDR_MASK; |
| } |
| |
| for (i = 0; i < config->num_records; i++) { |
| d[i].base = reg + offset + stats_offset; |
| |
| /* |
| * Read the low power mode name and create debugfs file for it. |
| * The names read could be of below, |
| * (may change depending on low power mode supported). |
| * For rpmh-sleep-stats: "aosd", "cxsd" and "ddr". |
| * For rpm-sleep-stats: "vmin" and "vlow". |
| */ |
| type = readl(d[i].base); |
| for (j = 0; j < sizeof(u32); j++) { |
| stat_type[j] = type & 0xff; |
| type = type >> 8; |
| } |
| strim(stat_type); |
| debugfs_create_file(stat_type, 0400, root, &d[i], |
| &qcom_soc_sleep_stats_fops); |
| |
| offset += sizeof(struct sleep_stats); |
| if (d[i].appended_stats_avail) |
| offset += sizeof(struct appended_stats); |
| } |
| } |
| |
| static void qcom_create_subsystem_stat_files(struct dentry *root, |
| const struct stats_config *config) |
| { |
| int i; |
| |
| if (!config->subsystem_stats_in_smem) |
| return; |
| |
| for (i = 0; i < ARRAY_SIZE(subsystems); i++) |
| debugfs_create_file(subsystems[i].name, 0400, root, (void *)&subsystems[i], |
| &qcom_subsystem_sleep_stats_fops); |
| } |
| |
| static int qcom_stats_probe(struct platform_device *pdev) |
| { |
| void __iomem *reg; |
| struct dentry *root; |
| const struct stats_config *config; |
| struct stats_data *d; |
| int i; |
| |
| config = device_get_match_data(&pdev->dev); |
| if (!config) |
| return -ENODEV; |
| |
| reg = devm_platform_get_and_ioremap_resource(pdev, 0, NULL); |
| if (IS_ERR(reg)) |
| return -ENOMEM; |
| |
| d = devm_kcalloc(&pdev->dev, config->num_records, |
| sizeof(*d), GFP_KERNEL); |
| if (!d) |
| return -ENOMEM; |
| |
| for (i = 0; i < config->num_records; i++) |
| d[i].appended_stats_avail = config->appended_stats_avail; |
| |
| root = debugfs_create_dir("qcom_stats", NULL); |
| |
| qcom_create_subsystem_stat_files(root, config); |
| qcom_create_soc_sleep_stat_files(root, reg, d, config); |
| |
| platform_set_drvdata(pdev, root); |
| |
| device_set_pm_not_required(&pdev->dev); |
| |
| return 0; |
| } |
| |
| static void qcom_stats_remove(struct platform_device *pdev) |
| { |
| struct dentry *root = platform_get_drvdata(pdev); |
| |
| debugfs_remove_recursive(root); |
| } |
| |
| static const struct stats_config rpm_data = { |
| .stats_offset = 0, |
| .num_records = 2, |
| .appended_stats_avail = true, |
| .dynamic_offset = true, |
| .subsystem_stats_in_smem = false, |
| }; |
| |
| /* Older RPM firmwares have the stats at a fixed offset instead */ |
| static const struct stats_config rpm_data_dba0 = { |
| .stats_offset = 0xdba0, |
| .num_records = 2, |
| .appended_stats_avail = true, |
| .dynamic_offset = false, |
| .subsystem_stats_in_smem = false, |
| }; |
| |
| static const struct stats_config rpmh_data_sdm845 = { |
| .stats_offset = 0x48, |
| .num_records = 2, |
| .appended_stats_avail = false, |
| .dynamic_offset = false, |
| .subsystem_stats_in_smem = true, |
| }; |
| |
| static const struct stats_config rpmh_data = { |
| .stats_offset = 0x48, |
| .num_records = 3, |
| .appended_stats_avail = false, |
| .dynamic_offset = false, |
| .subsystem_stats_in_smem = true, |
| }; |
| |
| static const struct of_device_id qcom_stats_table[] = { |
| { .compatible = "qcom,apq8084-rpm-stats", .data = &rpm_data_dba0 }, |
| { .compatible = "qcom,msm8226-rpm-stats", .data = &rpm_data_dba0 }, |
| { .compatible = "qcom,msm8916-rpm-stats", .data = &rpm_data_dba0 }, |
| { .compatible = "qcom,msm8974-rpm-stats", .data = &rpm_data_dba0 }, |
| { .compatible = "qcom,rpm-stats", .data = &rpm_data }, |
| { .compatible = "qcom,rpmh-stats", .data = &rpmh_data }, |
| { .compatible = "qcom,sdm845-rpmh-stats", .data = &rpmh_data_sdm845 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, qcom_stats_table); |
| |
| static struct platform_driver qcom_stats = { |
| .probe = qcom_stats_probe, |
| .remove_new = qcom_stats_remove, |
| .driver = { |
| .name = "qcom_stats", |
| .of_match_table = qcom_stats_table, |
| }, |
| }; |
| |
| static int __init qcom_stats_init(void) |
| { |
| return platform_driver_register(&qcom_stats); |
| } |
| late_initcall(qcom_stats_init); |
| |
| static void __exit qcom_stats_exit(void) |
| { |
| platform_driver_unregister(&qcom_stats); |
| } |
| module_exit(qcom_stats_exit) |
| |
| MODULE_DESCRIPTION("Qualcomm Technologies, Inc. (QTI) Stats driver"); |
| MODULE_LICENSE("GPL v2"); |