| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright 1998-2009 VIA Technologies, Inc. All Rights Reserved. |
| * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved. |
| |
| */ |
| |
| #include <linux/platform_device.h> |
| #include <linux/delay.h> |
| #include <linux/spinlock.h> |
| #include <linux/module.h> |
| #include <linux/via-core.h> |
| #include <linux/via_i2c.h> |
| |
| /* |
| * There can only be one set of these, so there's no point in having |
| * them be dynamically allocated... |
| */ |
| #define VIAFB_NUM_I2C 5 |
| static struct via_i2c_stuff via_i2c_par[VIAFB_NUM_I2C]; |
| static struct viafb_dev *i2c_vdev; /* Passed in from core */ |
| |
| static void via_i2c_setscl(void *data, int state) |
| { |
| u8 val; |
| struct via_port_cfg *adap_data = data; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&i2c_vdev->reg_lock, flags); |
| val = via_read_reg(adap_data->io_port, adap_data->ioport_index) & 0xF0; |
| if (state) |
| val |= 0x20; |
| else |
| val &= ~0x20; |
| switch (adap_data->type) { |
| case VIA_PORT_I2C: |
| val |= 0x01; |
| break; |
| case VIA_PORT_GPIO: |
| val |= 0x82; |
| break; |
| default: |
| printk(KERN_ERR "viafb_i2c: specify wrong i2c type.\n"); |
| } |
| via_write_reg(adap_data->io_port, adap_data->ioport_index, val); |
| spin_unlock_irqrestore(&i2c_vdev->reg_lock, flags); |
| } |
| |
| static int via_i2c_getscl(void *data) |
| { |
| struct via_port_cfg *adap_data = data; |
| unsigned long flags; |
| int ret = 0; |
| |
| spin_lock_irqsave(&i2c_vdev->reg_lock, flags); |
| if (adap_data->type == VIA_PORT_GPIO) |
| via_write_reg_mask(adap_data->io_port, adap_data->ioport_index, |
| 0, 0x80); |
| if (via_read_reg(adap_data->io_port, adap_data->ioport_index) & 0x08) |
| ret = 1; |
| spin_unlock_irqrestore(&i2c_vdev->reg_lock, flags); |
| return ret; |
| } |
| |
| static int via_i2c_getsda(void *data) |
| { |
| struct via_port_cfg *adap_data = data; |
| unsigned long flags; |
| int ret = 0; |
| |
| spin_lock_irqsave(&i2c_vdev->reg_lock, flags); |
| if (adap_data->type == VIA_PORT_GPIO) |
| via_write_reg_mask(adap_data->io_port, adap_data->ioport_index, |
| 0, 0x40); |
| if (via_read_reg(adap_data->io_port, adap_data->ioport_index) & 0x04) |
| ret = 1; |
| spin_unlock_irqrestore(&i2c_vdev->reg_lock, flags); |
| return ret; |
| } |
| |
| static void via_i2c_setsda(void *data, int state) |
| { |
| u8 val; |
| struct via_port_cfg *adap_data = data; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&i2c_vdev->reg_lock, flags); |
| val = via_read_reg(adap_data->io_port, adap_data->ioport_index) & 0xF0; |
| if (state) |
| val |= 0x10; |
| else |
| val &= ~0x10; |
| switch (adap_data->type) { |
| case VIA_PORT_I2C: |
| val |= 0x01; |
| break; |
| case VIA_PORT_GPIO: |
| val |= 0x42; |
| break; |
| default: |
| printk(KERN_ERR "viafb_i2c: specify wrong i2c type.\n"); |
| } |
| via_write_reg(adap_data->io_port, adap_data->ioport_index, val); |
| spin_unlock_irqrestore(&i2c_vdev->reg_lock, flags); |
| } |
| |
| int viafb_i2c_readbyte(u8 adap, u8 target_addr, u8 index, u8 *pdata) |
| { |
| int ret; |
| u8 mm1[] = {0x00}; |
| struct i2c_msg msgs[2]; |
| |
| if (!via_i2c_par[adap].is_active) |
| return -ENODEV; |
| *pdata = 0; |
| msgs[0].flags = 0; |
| msgs[1].flags = I2C_M_RD; |
| msgs[0].addr = msgs[1].addr = target_addr / 2; |
| mm1[0] = index; |
| msgs[0].len = 1; msgs[1].len = 1; |
| msgs[0].buf = mm1; msgs[1].buf = pdata; |
| ret = i2c_transfer(&via_i2c_par[adap].adapter, msgs, 2); |
| if (ret == 2) |
| ret = 0; |
| else if (ret >= 0) |
| ret = -EIO; |
| |
| return ret; |
| } |
| |
| int viafb_i2c_writebyte(u8 adap, u8 target_addr, u8 index, u8 data) |
| { |
| int ret; |
| u8 msg[2] = { index, data }; |
| struct i2c_msg msgs; |
| |
| if (!via_i2c_par[adap].is_active) |
| return -ENODEV; |
| msgs.flags = 0; |
| msgs.addr = target_addr / 2; |
| msgs.len = 2; |
| msgs.buf = msg; |
| ret = i2c_transfer(&via_i2c_par[adap].adapter, &msgs, 1); |
| if (ret == 1) |
| ret = 0; |
| else if (ret >= 0) |
| ret = -EIO; |
| |
| return ret; |
| } |
| |
| int viafb_i2c_readbytes(u8 adap, u8 target_addr, u8 index, u8 *buff, int buff_len) |
| { |
| int ret; |
| u8 mm1[] = {0x00}; |
| struct i2c_msg msgs[2]; |
| |
| if (!via_i2c_par[adap].is_active) |
| return -ENODEV; |
| msgs[0].flags = 0; |
| msgs[1].flags = I2C_M_RD; |
| msgs[0].addr = msgs[1].addr = target_addr / 2; |
| mm1[0] = index; |
| msgs[0].len = 1; msgs[1].len = buff_len; |
| msgs[0].buf = mm1; msgs[1].buf = buff; |
| ret = i2c_transfer(&via_i2c_par[adap].adapter, msgs, 2); |
| if (ret == 2) |
| ret = 0; |
| else if (ret >= 0) |
| ret = -EIO; |
| |
| return ret; |
| } |
| |
| /* |
| * Allow other viafb subdevices to look up a specific adapter |
| * by port name. |
| */ |
| struct i2c_adapter *viafb_find_i2c_adapter(enum viafb_i2c_adap which) |
| { |
| struct via_i2c_stuff *stuff = &via_i2c_par[which]; |
| |
| return &stuff->adapter; |
| } |
| EXPORT_SYMBOL_GPL(viafb_find_i2c_adapter); |
| |
| |
| static int create_i2c_bus(struct i2c_adapter *adapter, |
| struct i2c_algo_bit_data *algo, |
| struct via_port_cfg *adap_cfg, |
| struct pci_dev *pdev) |
| { |
| algo->setsda = via_i2c_setsda; |
| algo->setscl = via_i2c_setscl; |
| algo->getsda = via_i2c_getsda; |
| algo->getscl = via_i2c_getscl; |
| algo->udelay = 10; |
| algo->timeout = 2; |
| algo->data = adap_cfg; |
| |
| sprintf(adapter->name, "viafb i2c io_port idx 0x%02x", |
| adap_cfg->ioport_index); |
| adapter->owner = THIS_MODULE; |
| adapter->algo_data = algo; |
| if (pdev) |
| adapter->dev.parent = &pdev->dev; |
| else |
| adapter->dev.parent = NULL; |
| /* i2c_set_adapdata(adapter, adap_cfg); */ |
| |
| /* Raise SCL and SDA */ |
| via_i2c_setsda(adap_cfg, 1); |
| via_i2c_setscl(adap_cfg, 1); |
| udelay(20); |
| |
| return i2c_bit_add_bus(adapter); |
| } |
| |
| static int viafb_i2c_probe(struct platform_device *platdev) |
| { |
| int i, ret; |
| struct via_port_cfg *configs; |
| |
| i2c_vdev = platdev->dev.platform_data; |
| configs = i2c_vdev->port_cfg; |
| |
| for (i = 0; i < VIAFB_NUM_PORTS; i++) { |
| struct via_port_cfg *adap_cfg = configs++; |
| struct via_i2c_stuff *i2c_stuff = &via_i2c_par[i]; |
| |
| i2c_stuff->is_active = 0; |
| if (adap_cfg->type == 0 || adap_cfg->mode != VIA_MODE_I2C) |
| continue; |
| ret = create_i2c_bus(&i2c_stuff->adapter, |
| &i2c_stuff->algo, adap_cfg, |
| NULL); /* FIXME: PCIDEV */ |
| if (ret < 0) { |
| printk(KERN_ERR "viafb: cannot create i2c bus %u:%d\n", |
| i, ret); |
| continue; /* Still try to make the rest */ |
| } |
| i2c_stuff->is_active = 1; |
| } |
| |
| return 0; |
| } |
| |
| static void viafb_i2c_remove(struct platform_device *platdev) |
| { |
| int i; |
| |
| for (i = 0; i < VIAFB_NUM_PORTS; i++) { |
| struct via_i2c_stuff *i2c_stuff = &via_i2c_par[i]; |
| /* |
| * Only remove those entries in the array that we've |
| * actually used (and thus initialized algo_data) |
| */ |
| if (i2c_stuff->is_active) |
| i2c_del_adapter(&i2c_stuff->adapter); |
| } |
| } |
| |
| static struct platform_driver via_i2c_driver = { |
| .driver = { |
| .name = "viafb-i2c", |
| }, |
| .probe = viafb_i2c_probe, |
| .remove = viafb_i2c_remove, |
| }; |
| |
| int viafb_i2c_init(void) |
| { |
| return platform_driver_register(&via_i2c_driver); |
| } |
| |
| void viafb_i2c_exit(void) |
| { |
| platform_driver_unregister(&via_i2c_driver); |
| } |