| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright 2005-2008 Freescale Semiconductor, Inc. All Rights Reserved. |
| * Copyright 2008 Luotao Fu, kernel@pengutronix.de |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| #include <linux/ktime.h> |
| #include <linux/module.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/platform_device.h> |
| |
| #include <linux/w1.h> |
| |
| /* |
| * MXC W1 Register offsets |
| */ |
| #define MXC_W1_CONTROL 0x00 |
| # define MXC_W1_CONTROL_RDST BIT(3) |
| # define MXC_W1_CONTROL_WR(x) BIT(5 - (x)) |
| # define MXC_W1_CONTROL_PST BIT(6) |
| # define MXC_W1_CONTROL_RPP BIT(7) |
| #define MXC_W1_TIME_DIVIDER 0x02 |
| #define MXC_W1_RESET 0x04 |
| # define MXC_W1_RESET_RST BIT(0) |
| |
| struct mxc_w1_device { |
| void __iomem *regs; |
| struct clk *clk; |
| struct w1_bus_master bus_master; |
| }; |
| |
| /* |
| * this is the low level routine to |
| * reset the device on the One Wire interface |
| * on the hardware |
| */ |
| static u8 mxc_w1_ds2_reset_bus(void *data) |
| { |
| struct mxc_w1_device *dev = data; |
| ktime_t timeout; |
| |
| writeb(MXC_W1_CONTROL_RPP, dev->regs + MXC_W1_CONTROL); |
| |
| /* Wait for reset sequence 511+512us, use 1500us for sure */ |
| timeout = ktime_add_us(ktime_get(), 1500); |
| |
| udelay(511 + 512); |
| |
| do { |
| u8 ctrl = readb(dev->regs + MXC_W1_CONTROL); |
| |
| /* PST bit is valid after the RPP bit is self-cleared */ |
| if (!(ctrl & MXC_W1_CONTROL_RPP)) |
| return !(ctrl & MXC_W1_CONTROL_PST); |
| } while (ktime_before(ktime_get(), timeout)); |
| |
| return 1; |
| } |
| |
| /* |
| * this is the low level routine to read/write a bit on the One Wire |
| * interface on the hardware. It does write 0 if parameter bit is set |
| * to 0, otherwise a write 1/read. |
| */ |
| static u8 mxc_w1_ds2_touch_bit(void *data, u8 bit) |
| { |
| struct mxc_w1_device *dev = data; |
| ktime_t timeout; |
| |
| writeb(MXC_W1_CONTROL_WR(bit), dev->regs + MXC_W1_CONTROL); |
| |
| /* Wait for read/write bit (60us, Max 120us), use 200us for sure */ |
| timeout = ktime_add_us(ktime_get(), 200); |
| |
| udelay(60); |
| |
| do { |
| u8 ctrl = readb(dev->regs + MXC_W1_CONTROL); |
| |
| /* RDST bit is valid after the WR1/RD bit is self-cleared */ |
| if (!(ctrl & MXC_W1_CONTROL_WR(bit))) |
| return !!(ctrl & MXC_W1_CONTROL_RDST); |
| } while (ktime_before(ktime_get(), timeout)); |
| |
| return 0; |
| } |
| |
| static int mxc_w1_probe(struct platform_device *pdev) |
| { |
| struct mxc_w1_device *mdev; |
| unsigned long clkrate; |
| unsigned int clkdiv; |
| int err; |
| |
| mdev = devm_kzalloc(&pdev->dev, sizeof(struct mxc_w1_device), |
| GFP_KERNEL); |
| if (!mdev) |
| return -ENOMEM; |
| |
| mdev->clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(mdev->clk)) |
| return PTR_ERR(mdev->clk); |
| |
| err = clk_prepare_enable(mdev->clk); |
| if (err) |
| return err; |
| |
| clkrate = clk_get_rate(mdev->clk); |
| if (clkrate < 10000000) |
| dev_warn(&pdev->dev, |
| "Low clock frequency causes improper function\n"); |
| |
| clkdiv = DIV_ROUND_CLOSEST(clkrate, 1000000); |
| clkrate /= clkdiv; |
| if ((clkrate < 980000) || (clkrate > 1020000)) |
| dev_warn(&pdev->dev, |
| "Incorrect time base frequency %lu Hz\n", clkrate); |
| |
| mdev->regs = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(mdev->regs)) { |
| err = PTR_ERR(mdev->regs); |
| goto out_disable_clk; |
| } |
| |
| /* Software reset 1-Wire module */ |
| writeb(MXC_W1_RESET_RST, mdev->regs + MXC_W1_RESET); |
| writeb(0, mdev->regs + MXC_W1_RESET); |
| |
| writeb(clkdiv - 1, mdev->regs + MXC_W1_TIME_DIVIDER); |
| |
| mdev->bus_master.data = mdev; |
| mdev->bus_master.reset_bus = mxc_w1_ds2_reset_bus; |
| mdev->bus_master.touch_bit = mxc_w1_ds2_touch_bit; |
| |
| platform_set_drvdata(pdev, mdev); |
| |
| err = w1_add_master_device(&mdev->bus_master); |
| if (err) |
| goto out_disable_clk; |
| |
| return 0; |
| |
| out_disable_clk: |
| clk_disable_unprepare(mdev->clk); |
| return err; |
| } |
| |
| /* |
| * disassociate the w1 device from the driver |
| */ |
| static void mxc_w1_remove(struct platform_device *pdev) |
| { |
| struct mxc_w1_device *mdev = platform_get_drvdata(pdev); |
| |
| w1_remove_master_device(&mdev->bus_master); |
| |
| clk_disable_unprepare(mdev->clk); |
| } |
| |
| static const struct of_device_id mxc_w1_dt_ids[] = { |
| { .compatible = "fsl,imx21-owire" }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, mxc_w1_dt_ids); |
| |
| static struct platform_driver mxc_w1_driver = { |
| .driver = { |
| .name = "mxc_w1", |
| .of_match_table = mxc_w1_dt_ids, |
| }, |
| .probe = mxc_w1_probe, |
| .remove_new = mxc_w1_remove, |
| }; |
| module_platform_driver(mxc_w1_driver); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Freescale Semiconductors Inc"); |
| MODULE_DESCRIPTION("Driver for One-Wire on MXC"); |