| // SPDX-License-Identifier: GPL-2.0 |
| |
| #include <stdint.h> |
| #include "resctrl.h" |
| |
| char llc_occup_path[1024]; |
| |
| void perf_event_attr_initialize(struct perf_event_attr *pea, __u64 config) |
| { |
| memset(pea, 0, sizeof(*pea)); |
| pea->type = PERF_TYPE_HARDWARE; |
| pea->size = sizeof(*pea); |
| pea->read_format = PERF_FORMAT_GROUP; |
| pea->exclude_kernel = 1; |
| pea->exclude_hv = 1; |
| pea->exclude_idle = 1; |
| pea->exclude_callchain_kernel = 1; |
| pea->inherit = 1; |
| pea->exclude_guest = 1; |
| pea->disabled = 1; |
| pea->config = config; |
| } |
| |
| /* Start counters to log values */ |
| int perf_event_reset_enable(int pe_fd) |
| { |
| int ret; |
| |
| ret = ioctl(pe_fd, PERF_EVENT_IOC_RESET, 0); |
| if (ret < 0) |
| return ret; |
| |
| ret = ioctl(pe_fd, PERF_EVENT_IOC_ENABLE, 0); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| void perf_event_initialize_read_format(struct perf_event_read *pe_read) |
| { |
| memset(pe_read, 0, sizeof(*pe_read)); |
| pe_read->nr = 1; |
| } |
| |
| int perf_open(struct perf_event_attr *pea, pid_t pid, int cpu_no) |
| { |
| int pe_fd; |
| |
| pe_fd = perf_event_open(pea, pid, cpu_no, -1, PERF_FLAG_FD_CLOEXEC); |
| if (pe_fd == -1) { |
| ksft_perror("Error opening leader"); |
| return -1; |
| } |
| |
| perf_event_reset_enable(pe_fd); |
| |
| return pe_fd; |
| } |
| |
| /* |
| * Get LLC Occupancy as reported by RESCTRL FS |
| * For CMT, |
| * 1. If con_mon grp and mon grp given, then read from mon grp in |
| * con_mon grp |
| * 2. If only con_mon grp given, then read from con_mon grp |
| * 3. If both not given, then read from root con_mon grp |
| * For CAT, |
| * 1. If con_mon grp given, then read from it |
| * 2. If con_mon grp not given, then read from root con_mon grp |
| * |
| * Return: =0 on success. <0 on failure. |
| */ |
| static int get_llc_occu_resctrl(unsigned long *llc_occupancy) |
| { |
| FILE *fp; |
| |
| fp = fopen(llc_occup_path, "r"); |
| if (!fp) { |
| ksft_perror("Failed to open results file"); |
| |
| return -1; |
| } |
| if (fscanf(fp, "%lu", llc_occupancy) <= 0) { |
| ksft_perror("Could not get llc occupancy"); |
| fclose(fp); |
| |
| return -1; |
| } |
| fclose(fp); |
| |
| return 0; |
| } |
| |
| /* |
| * print_results_cache: the cache results are stored in a file |
| * @filename: file that stores the results |
| * @bm_pid: child pid that runs benchmark |
| * @llc_value: perf miss value / |
| * llc occupancy value reported by resctrl FS |
| * |
| * Return: 0 on success, < 0 on error. |
| */ |
| static int print_results_cache(const char *filename, pid_t bm_pid, __u64 llc_value) |
| { |
| FILE *fp; |
| |
| if (strcmp(filename, "stdio") == 0 || strcmp(filename, "stderr") == 0) { |
| printf("Pid: %d \t LLC_value: %llu\n", (int)bm_pid, llc_value); |
| } else { |
| fp = fopen(filename, "a"); |
| if (!fp) { |
| ksft_perror("Cannot open results file"); |
| |
| return -1; |
| } |
| fprintf(fp, "Pid: %d \t llc_value: %llu\n", (int)bm_pid, llc_value); |
| fclose(fp); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * perf_event_measure - Measure perf events |
| * @filename: Filename for writing the results |
| * @bm_pid: PID that runs the benchmark |
| * |
| * Measures perf events (e.g., cache misses) and writes the results into |
| * @filename. @bm_pid is written to the results file along with the measured |
| * value. |
| * |
| * Return: =0 on success. <0 on failure. |
| */ |
| int perf_event_measure(int pe_fd, struct perf_event_read *pe_read, |
| const char *filename, pid_t bm_pid) |
| { |
| int ret; |
| |
| /* Stop counters after one span to get miss rate */ |
| ret = ioctl(pe_fd, PERF_EVENT_IOC_DISABLE, 0); |
| if (ret < 0) |
| return ret; |
| |
| ret = read(pe_fd, pe_read, sizeof(*pe_read)); |
| if (ret == -1) { |
| ksft_perror("Could not get perf value"); |
| return -1; |
| } |
| |
| return print_results_cache(filename, bm_pid, pe_read->values[0].value); |
| } |
| |
| /* |
| * measure_llc_resctrl - Measure resctrl LLC value from resctrl |
| * @filename: Filename for writing the results |
| * @bm_pid: PID that runs the benchmark |
| * |
| * Measures LLC occupancy from resctrl and writes the results into @filename. |
| * @bm_pid is written to the results file along with the measured value. |
| * |
| * Return: =0 on success. <0 on failure. |
| */ |
| int measure_llc_resctrl(const char *filename, pid_t bm_pid) |
| { |
| unsigned long llc_occu_resc = 0; |
| int ret; |
| |
| ret = get_llc_occu_resctrl(&llc_occu_resc); |
| if (ret < 0) |
| return ret; |
| |
| return print_results_cache(filename, bm_pid, llc_occu_resc); |
| } |
| |
| /* |
| * show_cache_info - Show generic cache test information |
| * @no_of_bits: Number of bits |
| * @avg_llc_val: Average of LLC cache result data |
| * @cache_span: Cache span |
| * @lines: @cache_span in lines or bytes |
| */ |
| void show_cache_info(int no_of_bits, __u64 avg_llc_val, size_t cache_span, bool lines) |
| { |
| ksft_print_msg("Number of bits: %d\n", no_of_bits); |
| ksft_print_msg("Average LLC val: %llu\n", avg_llc_val); |
| ksft_print_msg("Cache span (%s): %zu\n", lines ? "lines" : "bytes", |
| cache_span); |
| } |