| /* |
| * Copyright (C) 2005-2006 Micronas USA Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License (Version 2) as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software Foundation, |
| * Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/sched.h> |
| #include <linux/spinlock.h> |
| #include <linux/unistd.h> |
| #include <linux/time.h> |
| #include <linux/mm.h> |
| #include <linux/vmalloc.h> |
| #include <linux/device.h> |
| #include <linux/i2c.h> |
| #include <linux/firmware.h> |
| #include <linux/mutex.h> |
| #include <linux/uaccess.h> |
| #include <linux/slab.h> |
| #include <asm/system.h> |
| #include <linux/videodev2.h> |
| #include <media/tuner.h> |
| #include <media/v4l2-common.h> |
| |
| #include "go7007-priv.h" |
| #include "wis-i2c.h" |
| |
| /* |
| * Wait for an interrupt to be delivered from the GO7007SB and return |
| * the associated value and data. |
| * |
| * Must be called with the hw_lock held. |
| */ |
| int go7007_read_interrupt(struct go7007 *go, u16 *value, u16 *data) |
| { |
| go->interrupt_available = 0; |
| go->hpi_ops->read_interrupt(go); |
| if (wait_event_timeout(go->interrupt_waitq, |
| go->interrupt_available, 5*HZ) < 0) { |
| v4l2_err(&go->v4l2_dev, "timeout waiting for read interrupt\n"); |
| return -1; |
| } |
| if (!go->interrupt_available) |
| return -1; |
| go->interrupt_available = 0; |
| *value = go->interrupt_value & 0xfffe; |
| *data = go->interrupt_data; |
| return 0; |
| } |
| EXPORT_SYMBOL(go7007_read_interrupt); |
| |
| /* |
| * Read a register/address on the GO7007SB. |
| * |
| * Must be called with the hw_lock held. |
| */ |
| int go7007_read_addr(struct go7007 *go, u16 addr, u16 *data) |
| { |
| int count = 100; |
| u16 value; |
| |
| if (go7007_write_interrupt(go, 0x0010, addr) < 0) |
| return -EIO; |
| while (count-- > 0) { |
| if (go7007_read_interrupt(go, &value, data) == 0 && |
| value == 0xa000) |
| return 0; |
| } |
| return -EIO; |
| } |
| EXPORT_SYMBOL(go7007_read_addr); |
| |
| /* |
| * Send the boot firmware to the encoder, which just wakes it up and lets |
| * us talk to the GPIO pins and on-board I2C adapter. |
| * |
| * Must be called with the hw_lock held. |
| */ |
| static int go7007_load_encoder(struct go7007 *go) |
| { |
| const struct firmware *fw_entry; |
| char fw_name[] = "go7007fw.bin"; |
| void *bounce; |
| int fw_len, rv = 0; |
| u16 intr_val, intr_data; |
| |
| if (request_firmware(&fw_entry, fw_name, go->dev)) { |
| v4l2_err(go, "unable to load firmware from file " |
| "\"%s\"\n", fw_name); |
| return -1; |
| } |
| if (fw_entry->size < 16 || memcmp(fw_entry->data, "WISGO7007FW", 11)) { |
| v4l2_err(go, "file \"%s\" does not appear to be " |
| "go7007 firmware\n", fw_name); |
| release_firmware(fw_entry); |
| return -1; |
| } |
| fw_len = fw_entry->size - 16; |
| bounce = kmalloc(fw_len, GFP_KERNEL); |
| if (bounce == NULL) { |
| v4l2_err(go, "unable to allocate %d bytes for " |
| "firmware transfer\n", fw_len); |
| release_firmware(fw_entry); |
| return -1; |
| } |
| memcpy(bounce, fw_entry->data + 16, fw_len); |
| release_firmware(fw_entry); |
| if (go7007_interface_reset(go) < 0 || |
| go7007_send_firmware(go, bounce, fw_len) < 0 || |
| go7007_read_interrupt(go, &intr_val, &intr_data) < 0 || |
| (intr_val & ~0x1) != 0x5a5a) { |
| v4l2_err(go, "error transferring firmware\n"); |
| rv = -1; |
| } |
| kfree(bounce); |
| return rv; |
| } |
| |
| MODULE_FIRMWARE("go7007fw.bin"); |
| |
| /* |
| * Boot the encoder and register the I2C adapter if requested. Do the |
| * minimum initialization necessary, since the board-specific code may |
| * still need to probe the board ID. |
| * |
| * Must NOT be called with the hw_lock held. |
| */ |
| int go7007_boot_encoder(struct go7007 *go, int init_i2c) |
| { |
| int ret; |
| |
| mutex_lock(&go->hw_lock); |
| ret = go7007_load_encoder(go); |
| mutex_unlock(&go->hw_lock); |
| if (ret < 0) |
| return -1; |
| if (!init_i2c) |
| return 0; |
| if (go7007_i2c_init(go) < 0) |
| return -1; |
| go->i2c_adapter_online = 1; |
| return 0; |
| } |
| EXPORT_SYMBOL(go7007_boot_encoder); |
| |
| /* |
| * Configure any hardware-related registers in the GO7007, such as GPIO |
| * pins and bus parameters, which are board-specific. This assumes |
| * the boot firmware has already been downloaded. |
| * |
| * Must be called with the hw_lock held. |
| */ |
| static int go7007_init_encoder(struct go7007 *go) |
| { |
| if (go->board_info->audio_flags & GO7007_AUDIO_I2S_MASTER) { |
| go7007_write_addr(go, 0x1000, 0x0811); |
| go7007_write_addr(go, 0x1000, 0x0c11); |
| } |
| if (go->board_id == GO7007_BOARDID_MATRIX_REV) { |
| /* Set GPIO pin 0 to be an output (audio clock control) */ |
| go7007_write_addr(go, 0x3c82, 0x0001); |
| go7007_write_addr(go, 0x3c80, 0x00fe); |
| } |
| return 0; |
| } |
| |
| /* |
| * Send the boot firmware to the GO7007 and configure the registers. This |
| * is the only way to stop the encoder once it has started streaming video. |
| * |
| * Must be called with the hw_lock held. |
| */ |
| int go7007_reset_encoder(struct go7007 *go) |
| { |
| if (go7007_load_encoder(go) < 0) |
| return -1; |
| return go7007_init_encoder(go); |
| } |
| |
| /* |
| * Attempt to instantiate an I2C client by ID, probably loading a module. |
| */ |
| static int init_i2c_module(struct i2c_adapter *adapter, const char *type, |
| int addr) |
| { |
| struct go7007 *go = i2c_get_adapdata(adapter); |
| struct v4l2_device *v4l2_dev = &go->v4l2_dev; |
| |
| if (v4l2_i2c_new_subdev(v4l2_dev, adapter, type, addr, NULL)) |
| return 0; |
| |
| printk(KERN_INFO "go7007: probing for module i2c:%s failed\n", type); |
| return -1; |
| } |
| |
| /* |
| * Finalize the GO7007 hardware setup, register the on-board I2C adapter |
| * (if used on this board), load the I2C client driver for the sensor |
| * (SAA7115 or whatever) and other devices, and register the ALSA and V4L2 |
| * interfaces. |
| * |
| * Must NOT be called with the hw_lock held. |
| */ |
| int go7007_register_encoder(struct go7007 *go) |
| { |
| int i, ret; |
| |
| printk(KERN_INFO "go7007: registering new %s\n", go->name); |
| |
| mutex_lock(&go->hw_lock); |
| ret = go7007_init_encoder(go); |
| mutex_unlock(&go->hw_lock); |
| if (ret < 0) |
| return -1; |
| |
| /* v4l2 init must happen before i2c subdevs */ |
| ret = go7007_v4l2_init(go); |
| if (ret < 0) |
| return ret; |
| |
| if (!go->i2c_adapter_online && |
| go->board_info->flags & GO7007_BOARD_USE_ONBOARD_I2C) { |
| if (go7007_i2c_init(go) < 0) |
| return -1; |
| go->i2c_adapter_online = 1; |
| } |
| if (go->i2c_adapter_online) { |
| for (i = 0; i < go->board_info->num_i2c_devs; ++i) |
| init_i2c_module(&go->i2c_adapter, |
| go->board_info->i2c_devs[i].type, |
| go->board_info->i2c_devs[i].addr); |
| if (go->board_id == GO7007_BOARDID_ADLINK_MPG24) |
| i2c_clients_command(&go->i2c_adapter, |
| DECODER_SET_CHANNEL, &go->channel_number); |
| } |
| if (go->board_info->flags & GO7007_BOARD_HAS_AUDIO) { |
| go->audio_enabled = 1; |
| go7007_snd_init(go); |
| } |
| return 0; |
| } |
| EXPORT_SYMBOL(go7007_register_encoder); |
| |
| /* |
| * Send the encode firmware to the encoder, which will cause it |
| * to immediately start delivering the video and audio streams. |
| * |
| * Must be called with the hw_lock held. |
| */ |
| int go7007_start_encoder(struct go7007 *go) |
| { |
| u8 *fw; |
| int fw_len, rv = 0, i; |
| u16 intr_val, intr_data; |
| |
| go->modet_enable = 0; |
| if (!go->dvd_mode) |
| for (i = 0; i < 4; ++i) { |
| if (go->modet[i].enable) { |
| go->modet_enable = 1; |
| continue; |
| } |
| go->modet[i].pixel_threshold = 32767; |
| go->modet[i].motion_threshold = 32767; |
| go->modet[i].mb_threshold = 32767; |
| } |
| |
| if (go7007_construct_fw_image(go, &fw, &fw_len) < 0) |
| return -1; |
| |
| if (go7007_send_firmware(go, fw, fw_len) < 0 || |
| go7007_read_interrupt(go, &intr_val, &intr_data) < 0) { |
| v4l2_err(&go->v4l2_dev, "error transferring firmware\n"); |
| rv = -1; |
| goto start_error; |
| } |
| |
| go->state = STATE_DATA; |
| go->parse_length = 0; |
| go->seen_frame = 0; |
| if (go7007_stream_start(go) < 0) { |
| v4l2_err(&go->v4l2_dev, "error starting stream transfer\n"); |
| rv = -1; |
| goto start_error; |
| } |
| |
| start_error: |
| kfree(fw); |
| return rv; |
| } |
| |
| /* |
| * Store a byte in the current video buffer, if there is one. |
| */ |
| static inline void store_byte(struct go7007_buffer *gobuf, u8 byte) |
| { |
| if (gobuf != NULL && gobuf->bytesused < GO7007_BUF_SIZE) { |
| unsigned int pgidx = gobuf->offset >> PAGE_SHIFT; |
| unsigned int pgoff = gobuf->offset & ~PAGE_MASK; |
| |
| *((u8 *)page_address(gobuf->pages[pgidx]) + pgoff) = byte; |
| ++gobuf->offset; |
| ++gobuf->bytesused; |
| } |
| } |
| |
| /* |
| * Deliver the last video buffer and get a new one to start writing to. |
| */ |
| static void frame_boundary(struct go7007 *go) |
| { |
| struct go7007_buffer *gobuf; |
| int i; |
| |
| if (go->active_buf) { |
| if (go->active_buf->modet_active) { |
| if (go->active_buf->bytesused + 216 < GO7007_BUF_SIZE) { |
| for (i = 0; i < 216; ++i) |
| store_byte(go->active_buf, |
| go->active_map[i]); |
| go->active_buf->bytesused -= 216; |
| } else |
| go->active_buf->modet_active = 0; |
| } |
| go->active_buf->state = BUF_STATE_DONE; |
| wake_up_interruptible(&go->frame_waitq); |
| go->active_buf = NULL; |
| } |
| list_for_each_entry(gobuf, &go->stream, stream) |
| if (gobuf->state == BUF_STATE_QUEUED) { |
| gobuf->seq = go->next_seq; |
| do_gettimeofday(&gobuf->timestamp); |
| go->active_buf = gobuf; |
| break; |
| } |
| ++go->next_seq; |
| } |
| |
| static void write_bitmap_word(struct go7007 *go) |
| { |
| int x, y, i, stride = ((go->width >> 4) + 7) >> 3; |
| |
| for (i = 0; i < 16; ++i) { |
| y = (((go->parse_length - 1) << 3) + i) / (go->width >> 4); |
| x = (((go->parse_length - 1) << 3) + i) % (go->width >> 4); |
| if (stride * y + (x >> 3) < sizeof(go->active_map)) |
| go->active_map[stride * y + (x >> 3)] |= |
| (go->modet_word & 1) << (x & 0x7); |
| go->modet_word >>= 1; |
| } |
| } |
| |
| /* |
| * Parse a chunk of the video stream into frames. The frames are not |
| * delimited by the hardware, so we have to parse the frame boundaries |
| * based on the type of video stream we're receiving. |
| */ |
| void go7007_parse_video_stream(struct go7007 *go, u8 *buf, int length) |
| { |
| int i, seq_start_code = -1, frame_start_code = -1; |
| |
| spin_lock(&go->spinlock); |
| |
| switch (go->format) { |
| case GO7007_FORMAT_MPEG4: |
| seq_start_code = 0xB0; |
| frame_start_code = 0xB6; |
| break; |
| case GO7007_FORMAT_MPEG1: |
| case GO7007_FORMAT_MPEG2: |
| seq_start_code = 0xB3; |
| frame_start_code = 0x00; |
| break; |
| } |
| |
| for (i = 0; i < length; ++i) { |
| if (go->active_buf != NULL && |
| go->active_buf->bytesused >= GO7007_BUF_SIZE - 3) { |
| v4l2_info(&go->v4l2_dev, "dropping oversized frame\n"); |
| go->active_buf->offset -= go->active_buf->bytesused; |
| go->active_buf->bytesused = 0; |
| go->active_buf->modet_active = 0; |
| go->active_buf = NULL; |
| } |
| |
| switch (go->state) { |
| case STATE_DATA: |
| switch (buf[i]) { |
| case 0x00: |
| go->state = STATE_00; |
| break; |
| case 0xFF: |
| go->state = STATE_FF; |
| break; |
| default: |
| store_byte(go->active_buf, buf[i]); |
| break; |
| } |
| break; |
| case STATE_00: |
| switch (buf[i]) { |
| case 0x00: |
| go->state = STATE_00_00; |
| break; |
| case 0xFF: |
| store_byte(go->active_buf, 0x00); |
| go->state = STATE_FF; |
| break; |
| default: |
| store_byte(go->active_buf, 0x00); |
| store_byte(go->active_buf, buf[i]); |
| go->state = STATE_DATA; |
| break; |
| } |
| break; |
| case STATE_00_00: |
| switch (buf[i]) { |
| case 0x00: |
| store_byte(go->active_buf, 0x00); |
| /* go->state remains STATE_00_00 */ |
| break; |
| case 0x01: |
| go->state = STATE_00_00_01; |
| break; |
| case 0xFF: |
| store_byte(go->active_buf, 0x00); |
| store_byte(go->active_buf, 0x00); |
| go->state = STATE_FF; |
| break; |
| default: |
| store_byte(go->active_buf, 0x00); |
| store_byte(go->active_buf, 0x00); |
| store_byte(go->active_buf, buf[i]); |
| go->state = STATE_DATA; |
| break; |
| } |
| break; |
| case STATE_00_00_01: |
| if (buf[i] == 0xF8 && go->modet_enable == 0) { |
| /* MODET start code, but MODET not enabled */ |
| store_byte(go->active_buf, 0x00); |
| store_byte(go->active_buf, 0x00); |
| store_byte(go->active_buf, 0x01); |
| store_byte(go->active_buf, 0xF8); |
| go->state = STATE_DATA; |
| break; |
| } |
| /* If this is the start of a new MPEG frame, |
| * get a new buffer */ |
| if ((go->format == GO7007_FORMAT_MPEG1 || |
| go->format == GO7007_FORMAT_MPEG2 || |
| go->format == GO7007_FORMAT_MPEG4) && |
| (buf[i] == seq_start_code || |
| buf[i] == 0xB8 || /* GOP code */ |
| buf[i] == frame_start_code)) { |
| if (go->active_buf == NULL || go->seen_frame) |
| frame_boundary(go); |
| if (buf[i] == frame_start_code) { |
| if (go->active_buf != NULL) |
| go->active_buf->frame_offset = |
| go->active_buf->offset; |
| go->seen_frame = 1; |
| } else { |
| go->seen_frame = 0; |
| } |
| } |
| /* Handle any special chunk types, or just write the |
| * start code to the (potentially new) buffer */ |
| switch (buf[i]) { |
| case 0xF5: /* timestamp */ |
| go->parse_length = 12; |
| go->state = STATE_UNPARSED; |
| break; |
| case 0xF6: /* vbi */ |
| go->state = STATE_VBI_LEN_A; |
| break; |
| case 0xF8: /* MD map */ |
| go->parse_length = 0; |
| memset(go->active_map, 0, |
| sizeof(go->active_map)); |
| go->state = STATE_MODET_MAP; |
| break; |
| case 0xFF: /* Potential JPEG start code */ |
| store_byte(go->active_buf, 0x00); |
| store_byte(go->active_buf, 0x00); |
| store_byte(go->active_buf, 0x01); |
| go->state = STATE_FF; |
| break; |
| default: |
| store_byte(go->active_buf, 0x00); |
| store_byte(go->active_buf, 0x00); |
| store_byte(go->active_buf, 0x01); |
| store_byte(go->active_buf, buf[i]); |
| go->state = STATE_DATA; |
| break; |
| } |
| break; |
| case STATE_FF: |
| switch (buf[i]) { |
| case 0x00: |
| store_byte(go->active_buf, 0xFF); |
| go->state = STATE_00; |
| break; |
| case 0xFF: |
| store_byte(go->active_buf, 0xFF); |
| /* go->state remains STATE_FF */ |
| break; |
| case 0xD8: |
| if (go->format == GO7007_FORMAT_MJPEG) |
| frame_boundary(go); |
| /* fall through */ |
| default: |
| store_byte(go->active_buf, 0xFF); |
| store_byte(go->active_buf, buf[i]); |
| go->state = STATE_DATA; |
| break; |
| } |
| break; |
| case STATE_VBI_LEN_A: |
| go->parse_length = buf[i] << 8; |
| go->state = STATE_VBI_LEN_B; |
| break; |
| case STATE_VBI_LEN_B: |
| go->parse_length |= buf[i]; |
| if (go->parse_length > 0) |
| go->state = STATE_UNPARSED; |
| else |
| go->state = STATE_DATA; |
| break; |
| case STATE_MODET_MAP: |
| if (go->parse_length < 204) { |
| if (go->parse_length & 1) { |
| go->modet_word |= buf[i]; |
| write_bitmap_word(go); |
| } else |
| go->modet_word = buf[i] << 8; |
| } else if (go->parse_length == 207 && go->active_buf) { |
| go->active_buf->modet_active = buf[i]; |
| } |
| if (++go->parse_length == 208) |
| go->state = STATE_DATA; |
| break; |
| case STATE_UNPARSED: |
| if (--go->parse_length == 0) |
| go->state = STATE_DATA; |
| break; |
| } |
| } |
| |
| spin_unlock(&go->spinlock); |
| } |
| EXPORT_SYMBOL(go7007_parse_video_stream); |
| |
| /* |
| * Allocate a new go7007 struct. Used by the hardware-specific probe. |
| */ |
| struct go7007 *go7007_alloc(struct go7007_board_info *board, struct device *dev) |
| { |
| struct go7007 *go; |
| int i; |
| |
| go = kmalloc(sizeof(struct go7007), GFP_KERNEL); |
| if (go == NULL) |
| return NULL; |
| go->dev = dev; |
| go->board_info = board; |
| go->board_id = 0; |
| go->tuner_type = -1; |
| go->channel_number = 0; |
| go->name[0] = 0; |
| mutex_init(&go->hw_lock); |
| init_waitqueue_head(&go->frame_waitq); |
| spin_lock_init(&go->spinlock); |
| go->video_dev = NULL; |
| go->ref_count = 0; |
| go->status = STATUS_INIT; |
| memset(&go->i2c_adapter, 0, sizeof(go->i2c_adapter)); |
| go->i2c_adapter_online = 0; |
| go->interrupt_available = 0; |
| init_waitqueue_head(&go->interrupt_waitq); |
| go->in_use = 0; |
| go->input = 0; |
| if (board->sensor_flags & GO7007_SENSOR_TV) { |
| go->standard = GO7007_STD_NTSC; |
| go->width = 720; |
| go->height = 480; |
| go->sensor_framerate = 30000; |
| } else { |
| go->standard = GO7007_STD_OTHER; |
| go->width = board->sensor_width; |
| go->height = board->sensor_height; |
| go->sensor_framerate = board->sensor_framerate; |
| } |
| go->encoder_v_offset = board->sensor_v_offset; |
| go->encoder_h_offset = board->sensor_h_offset; |
| go->encoder_h_halve = 0; |
| go->encoder_v_halve = 0; |
| go->encoder_subsample = 0; |
| go->streaming = 0; |
| go->format = GO7007_FORMAT_MJPEG; |
| go->bitrate = 1500000; |
| go->fps_scale = 1; |
| go->pali = 0; |
| go->aspect_ratio = GO7007_RATIO_1_1; |
| go->gop_size = 0; |
| go->ipb = 0; |
| go->closed_gop = 0; |
| go->repeat_seqhead = 0; |
| go->seq_header_enable = 0; |
| go->gop_header_enable = 0; |
| go->dvd_mode = 0; |
| go->interlace_coding = 0; |
| for (i = 0; i < 4; ++i) |
| go->modet[i].enable = 0; |
| for (i = 0; i < 1624; ++i) |
| go->modet_map[i] = 0; |
| go->audio_deliver = NULL; |
| go->audio_enabled = 0; |
| INIT_LIST_HEAD(&go->stream); |
| |
| return go; |
| } |
| EXPORT_SYMBOL(go7007_alloc); |
| |
| /* |
| * Detach and unregister the encoder. The go7007 struct won't be freed |
| * until v4l2 finishes releasing its resources and all associated fds are |
| * closed by applications. |
| */ |
| void go7007_remove(struct go7007 *go) |
| { |
| if (go->i2c_adapter_online) { |
| if (i2c_del_adapter(&go->i2c_adapter) == 0) |
| go->i2c_adapter_online = 0; |
| else |
| v4l2_err(&go->v4l2_dev, |
| "error removing I2C adapter!\n"); |
| } |
| |
| if (go->audio_enabled) |
| go7007_snd_remove(go); |
| go7007_v4l2_remove(go); |
| } |
| EXPORT_SYMBOL(go7007_remove); |
| |
| MODULE_LICENSE("GPL v2"); |