blob: fc6a7e451abef91df1a980a6e159fc1e81a270c9 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Sony ACX565AKM LCD Panel driver
*
* Copyright (C) 2019 Texas Instruments Incorporated
*
* Based on the omapdrm-specific panel-sony-acx565akm driver
*
* Copyright (C) 2010 Nokia Corporation
* Author: Imre Deak <imre.deak@nokia.com>
*/
/*
* TODO (to be addressed with hardware access to test the changes):
*
* - Update backlight support to use backlight_update_status() etc.
* - Use prepare/unprepare for the basic power on/off of the backligt
*/
#include <linux/backlight.h>
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/jiffies.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/sched.h>
#include <linux/spi/spi.h>
#include <video/mipi_display.h>
#include <drm/drm_connector.h>
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
#define CTRL_DISP_BRIGHTNESS_CTRL_ON BIT(5)
#define CTRL_DISP_AMBIENT_LIGHT_CTRL_ON BIT(4)
#define CTRL_DISP_BACKLIGHT_ON BIT(2)
#define CTRL_DISP_AUTO_BRIGHTNESS_ON BIT(1)
#define MIPID_CMD_WRITE_CABC 0x55
#define MIPID_CMD_READ_CABC 0x56
#define MIPID_VER_LPH8923 3
#define MIPID_VER_LS041Y3 4
#define MIPID_VER_L4F00311 8
#define MIPID_VER_ACX565AKM 9
struct acx565akm_panel {
struct drm_panel panel;
struct spi_device *spi;
struct gpio_desc *reset_gpio;
struct backlight_device *backlight;
struct mutex mutex;
const char *name;
u8 display_id[3];
int model;
int revision;
bool has_bc;
bool has_cabc;
bool enabled;
unsigned int cabc_mode;
/*
* Next value of jiffies when we can issue the next sleep in/out
* command.
*/
unsigned long hw_guard_end;
unsigned long hw_guard_wait; /* max guard time in jiffies */
};
#define to_acx565akm_device(p) container_of(p, struct acx565akm_panel, panel)
static void acx565akm_transfer(struct acx565akm_panel *lcd, int cmd,
const u8 *wbuf, int wlen, u8 *rbuf, int rlen)
{
struct spi_message m;
struct spi_transfer *x, xfer[5];
int ret;
spi_message_init(&m);
memset(xfer, 0, sizeof(xfer));
x = &xfer[0];
cmd &= 0xff;
x->tx_buf = &cmd;
x->bits_per_word = 9;
x->len = 2;
if (rlen > 1 && wlen == 0) {
/*
* Between the command and the response data there is a
* dummy clock cycle. Add an extra bit after the command
* word to account for this.
*/
x->bits_per_word = 10;
cmd <<= 1;
}
spi_message_add_tail(x, &m);
if (wlen) {
x++;
x->tx_buf = wbuf;
x->len = wlen;
x->bits_per_word = 9;
spi_message_add_tail(x, &m);
}
if (rlen) {
x++;
x->rx_buf = rbuf;
x->len = rlen;
spi_message_add_tail(x, &m);
}
ret = spi_sync(lcd->spi, &m);
if (ret < 0)
dev_dbg(&lcd->spi->dev, "spi_sync %d\n", ret);
}
static inline void acx565akm_cmd(struct acx565akm_panel *lcd, int cmd)
{
acx565akm_transfer(lcd, cmd, NULL, 0, NULL, 0);
}
static inline void acx565akm_write(struct acx565akm_panel *lcd,
int reg, const u8 *buf, int len)
{
acx565akm_transfer(lcd, reg, buf, len, NULL, 0);
}
static inline void acx565akm_read(struct acx565akm_panel *lcd,
int reg, u8 *buf, int len)
{
acx565akm_transfer(lcd, reg, NULL, 0, buf, len);
}
/* -----------------------------------------------------------------------------
* Auto Brightness Control Via sysfs
*/
static unsigned int acx565akm_get_cabc_mode(struct acx565akm_panel *lcd)
{
return lcd->cabc_mode;
}
static void acx565akm_set_cabc_mode(struct acx565akm_panel *lcd,
unsigned int mode)
{
u16 cabc_ctrl;
lcd->cabc_mode = mode;
if (!lcd->enabled)
return;
cabc_ctrl = 0;
acx565akm_read(lcd, MIPID_CMD_READ_CABC, (u8 *)&cabc_ctrl, 1);
cabc_ctrl &= ~3;
cabc_ctrl |= (1 << 8) | (mode & 3);
acx565akm_write(lcd, MIPID_CMD_WRITE_CABC, (u8 *)&cabc_ctrl, 2);
}
static unsigned int acx565akm_get_hw_cabc_mode(struct acx565akm_panel *lcd)
{
u8 cabc_ctrl;
acx565akm_read(lcd, MIPID_CMD_READ_CABC, &cabc_ctrl, 1);
return cabc_ctrl & 3;
}
static const char * const acx565akm_cabc_modes[] = {
"off", /* always used when CABC is not supported */
"ui",
"still-image",
"moving-image",
};
static ssize_t cabc_mode_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct acx565akm_panel *lcd = dev_get_drvdata(dev);
const char *mode_str;
int mode;
if (!lcd->has_cabc)
mode = 0;
else
mode = acx565akm_get_cabc_mode(lcd);
mode_str = "unknown";
if (mode >= 0 && mode < ARRAY_SIZE(acx565akm_cabc_modes))
mode_str = acx565akm_cabc_modes[mode];
return sprintf(buf, "%s\n", mode_str);
}
static ssize_t cabc_mode_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct acx565akm_panel *lcd = dev_get_drvdata(dev);
unsigned int i;
for (i = 0; i < ARRAY_SIZE(acx565akm_cabc_modes); i++) {
const char *mode_str = acx565akm_cabc_modes[i];
int cmp_len = strlen(mode_str);
if (count > 0 && buf[count - 1] == '\n')
count--;
if (count != cmp_len)
continue;
if (strncmp(buf, mode_str, cmp_len) == 0)
break;
}
if (i == ARRAY_SIZE(acx565akm_cabc_modes))
return -EINVAL;
if (!lcd->has_cabc && i != 0)
return -EINVAL;
mutex_lock(&lcd->mutex);
acx565akm_set_cabc_mode(lcd, i);
mutex_unlock(&lcd->mutex);
return count;
}
static ssize_t cabc_available_modes_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct acx565akm_panel *lcd = dev_get_drvdata(dev);
unsigned int i;
size_t len = 0;
if (!lcd->has_cabc)
return sprintf(buf, "%s\n", acx565akm_cabc_modes[0]);
for (i = 0; i < ARRAY_SIZE(acx565akm_cabc_modes); i++)
len += sprintf(&buf[len], "%s%s", i ? " " : "",
acx565akm_cabc_modes[i]);
buf[len++] = '\n';
return len;
}
static DEVICE_ATTR_RW(cabc_mode);
static DEVICE_ATTR_RO(cabc_available_modes);
static struct attribute *acx565akm_cabc_attrs[] = {
&dev_attr_cabc_mode.attr,
&dev_attr_cabc_available_modes.attr,
NULL,
};
static const struct attribute_group acx565akm_cabc_attr_group = {
.attrs = acx565akm_cabc_attrs,
};
/* -----------------------------------------------------------------------------
* Backlight Device
*/
static int acx565akm_get_actual_brightness(struct acx565akm_panel *lcd)
{
u8 bv;
acx565akm_read(lcd, MIPI_DCS_GET_DISPLAY_BRIGHTNESS, &bv, 1);
return bv;
}
static void acx565akm_set_brightness(struct acx565akm_panel *lcd, int level)
{
u16 ctrl;
int bv;
bv = level | (1 << 8);
acx565akm_write(lcd, MIPI_DCS_SET_DISPLAY_BRIGHTNESS, (u8 *)&bv, 2);
acx565akm_read(lcd, MIPI_DCS_GET_CONTROL_DISPLAY, (u8 *)&ctrl, 1);
if (level)
ctrl |= CTRL_DISP_BRIGHTNESS_CTRL_ON |
CTRL_DISP_BACKLIGHT_ON;
else
ctrl &= ~(CTRL_DISP_BRIGHTNESS_CTRL_ON |
CTRL_DISP_BACKLIGHT_ON);
ctrl |= 1 << 8;
acx565akm_write(lcd, MIPI_DCS_WRITE_CONTROL_DISPLAY, (u8 *)&ctrl, 2);
}
static int acx565akm_bl_update_status_locked(struct backlight_device *dev)
{
struct acx565akm_panel *lcd = dev_get_drvdata(&dev->dev);
int level;
if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
dev->props.power == FB_BLANK_UNBLANK)
level = dev->props.brightness;
else
level = 0;
acx565akm_set_brightness(lcd, level);
return 0;
}
static int acx565akm_bl_update_status(struct backlight_device *dev)
{
struct acx565akm_panel *lcd = dev_get_drvdata(&dev->dev);
int ret;
mutex_lock(&lcd->mutex);
ret = acx565akm_bl_update_status_locked(dev);
mutex_unlock(&lcd->mutex);
return ret;
}
static int acx565akm_bl_get_intensity(struct backlight_device *dev)
{
struct acx565akm_panel *lcd = dev_get_drvdata(&dev->dev);
unsigned int intensity;
mutex_lock(&lcd->mutex);
if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
dev->props.power == FB_BLANK_UNBLANK)
intensity = acx565akm_get_actual_brightness(lcd);
else
intensity = 0;
mutex_unlock(&lcd->mutex);
return intensity;
}
static const struct backlight_ops acx565akm_bl_ops = {
.get_brightness = acx565akm_bl_get_intensity,
.update_status = acx565akm_bl_update_status,
};
static int acx565akm_backlight_init(struct acx565akm_panel *lcd)
{
struct backlight_properties props = {
.fb_blank = FB_BLANK_UNBLANK,
.power = FB_BLANK_UNBLANK,
.type = BACKLIGHT_RAW,
};
int ret;
lcd->backlight = backlight_device_register(lcd->name, &lcd->spi->dev,
lcd, &acx565akm_bl_ops,
&props);
if (IS_ERR(lcd->backlight)) {
ret = PTR_ERR(lcd->backlight);
lcd->backlight = NULL;
return ret;
}
if (lcd->has_cabc) {
ret = sysfs_create_group(&lcd->backlight->dev.kobj,
&acx565akm_cabc_attr_group);
if (ret < 0) {
dev_err(&lcd->spi->dev,
"%s failed to create sysfs files\n", __func__);
backlight_device_unregister(lcd->backlight);
return ret;
}
lcd->cabc_mode = acx565akm_get_hw_cabc_mode(lcd);
}
lcd->backlight->props.max_brightness = 255;
lcd->backlight->props.brightness = acx565akm_get_actual_brightness(lcd);
acx565akm_bl_update_status_locked(lcd->backlight);
return 0;
}
static void acx565akm_backlight_cleanup(struct acx565akm_panel *lcd)
{
if (lcd->has_cabc)
sysfs_remove_group(&lcd->backlight->dev.kobj,
&acx565akm_cabc_attr_group);
backlight_device_unregister(lcd->backlight);
}
/* -----------------------------------------------------------------------------
* DRM Bridge Operations
*/
static void acx565akm_set_sleep_mode(struct acx565akm_panel *lcd, int on)
{
int cmd = on ? MIPI_DCS_ENTER_SLEEP_MODE : MIPI_DCS_EXIT_SLEEP_MODE;
unsigned long wait;
/*
* We have to keep 120msec between sleep in/out commands.
* (8.2.15, 8.2.16).
*/
wait = lcd->hw_guard_end - jiffies;
if ((long)wait > 0 && wait <= lcd->hw_guard_wait) {
set_current_state(TASK_UNINTERRUPTIBLE);
schedule_timeout(wait);
}
acx565akm_cmd(lcd, cmd);
lcd->hw_guard_wait = msecs_to_jiffies(120);
lcd->hw_guard_end = jiffies + lcd->hw_guard_wait;
}
static void acx565akm_set_display_state(struct acx565akm_panel *lcd,
int enabled)
{
int cmd = enabled ? MIPI_DCS_SET_DISPLAY_ON : MIPI_DCS_SET_DISPLAY_OFF;
acx565akm_cmd(lcd, cmd);
}
static int acx565akm_power_on(struct acx565akm_panel *lcd)
{
/*FIXME tweak me */
msleep(50);
gpiod_set_value(lcd->reset_gpio, 1);
if (lcd->enabled) {
dev_dbg(&lcd->spi->dev, "panel already enabled\n");
return 0;
}
/*
* We have to meet all the following delay requirements:
* 1. tRW: reset pulse width 10usec (7.12.1)
* 2. tRT: reset cancel time 5msec (7.12.1)
* 3. Providing PCLK,HS,VS signals for 2 frames = ~50msec worst
* case (7.6.2)
* 4. 120msec before the sleep out command (7.12.1)
*/
msleep(120);
acx565akm_set_sleep_mode(lcd, 0);
lcd->enabled = true;
/* 5msec between sleep out and the next command. (8.2.16) */
usleep_range(5000, 10000);
acx565akm_set_display_state(lcd, 1);
acx565akm_set_cabc_mode(lcd, lcd->cabc_mode);
return acx565akm_bl_update_status_locked(lcd->backlight);
}
static void acx565akm_power_off(struct acx565akm_panel *lcd)
{
if (!lcd->enabled)
return;
acx565akm_set_display_state(lcd, 0);
acx565akm_set_sleep_mode(lcd, 1);
lcd->enabled = false;
/*
* We have to provide PCLK,HS,VS signals for 2 frames (worst case
* ~50msec) after sending the sleep in command and asserting the
* reset signal. We probably could assert the reset w/o the delay
* but we still delay to avoid possible artifacts. (7.6.1)
*/
msleep(50);
gpiod_set_value(lcd->reset_gpio, 0);
/* FIXME need to tweak this delay */
msleep(100);
}
static int acx565akm_disable(struct drm_panel *panel)
{
struct acx565akm_panel *lcd = to_acx565akm_device(panel);
mutex_lock(&lcd->mutex);
acx565akm_power_off(lcd);
mutex_unlock(&lcd->mutex);
return 0;
}
static int acx565akm_enable(struct drm_panel *panel)
{
struct acx565akm_panel *lcd = to_acx565akm_device(panel);
mutex_lock(&lcd->mutex);
acx565akm_power_on(lcd);
mutex_unlock(&lcd->mutex);
return 0;
}
static const struct drm_display_mode acx565akm_mode = {
.clock = 24000,
.hdisplay = 800,
.hsync_start = 800 + 28,
.hsync_end = 800 + 28 + 4,
.htotal = 800 + 28 + 4 + 24,
.vdisplay = 480,
.vsync_start = 480 + 3,
.vsync_end = 480 + 3 + 3,
.vtotal = 480 + 3 + 3 + 4,
.type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
.width_mm = 77,
.height_mm = 46,
};
static int acx565akm_get_modes(struct drm_panel *panel,
struct drm_connector *connector)
{
struct drm_display_mode *mode;
mode = drm_mode_duplicate(connector->dev, &acx565akm_mode);
if (!mode)
return -ENOMEM;
drm_mode_set_name(mode);
drm_mode_probed_add(connector, mode);
connector->display_info.width_mm = acx565akm_mode.width_mm;
connector->display_info.height_mm = acx565akm_mode.height_mm;
connector->display_info.bus_flags = DRM_BUS_FLAG_DE_HIGH
| DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE
| DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE;
return 1;
}
static const struct drm_panel_funcs acx565akm_funcs = {
.disable = acx565akm_disable,
.enable = acx565akm_enable,
.get_modes = acx565akm_get_modes,
};
/* -----------------------------------------------------------------------------
* Probe, Detect and Remove
*/
static int acx565akm_detect(struct acx565akm_panel *lcd)
{
__be32 value;
u32 status;
int ret = 0;
/*
* After being taken out of reset the panel needs 5ms before the first
* command can be sent.
*/
gpiod_set_value(lcd->reset_gpio, 1);
usleep_range(5000, 10000);
acx565akm_read(lcd, MIPI_DCS_GET_DISPLAY_STATUS, (u8 *)&value, 4);
status = __be32_to_cpu(value);
lcd->enabled = (status & (1 << 17)) && (status & (1 << 10));
dev_dbg(&lcd->spi->dev,
"LCD panel %s by bootloader (status 0x%04x)\n",
lcd->enabled ? "enabled" : "disabled ", status);
acx565akm_read(lcd, MIPI_DCS_GET_DISPLAY_ID, lcd->display_id, 3);
dev_dbg(&lcd->spi->dev, "MIPI display ID: %02x%02x%02x\n",
lcd->display_id[0], lcd->display_id[1], lcd->display_id[2]);
switch (lcd->display_id[0]) {
case 0x10:
lcd->model = MIPID_VER_ACX565AKM;
lcd->name = "acx565akm";
lcd->has_bc = 1;
lcd->has_cabc = 1;
break;
case 0x29:
lcd->model = MIPID_VER_L4F00311;
lcd->name = "l4f00311";
break;
case 0x45:
lcd->model = MIPID_VER_LPH8923;
lcd->name = "lph8923";
break;
case 0x83:
lcd->model = MIPID_VER_LS041Y3;
lcd->name = "ls041y3";
break;
default:
lcd->name = "unknown";
dev_err(&lcd->spi->dev, "unknown display ID\n");
ret = -ENODEV;
goto done;
}
lcd->revision = lcd->display_id[1];
dev_info(&lcd->spi->dev, "%s rev %02x panel detected\n",
lcd->name, lcd->revision);
done:
if (!lcd->enabled)
gpiod_set_value(lcd->reset_gpio, 0);
return ret;
}
static int acx565akm_probe(struct spi_device *spi)
{
struct acx565akm_panel *lcd;
int ret;
lcd = devm_kzalloc(&spi->dev, sizeof(*lcd), GFP_KERNEL);
if (!lcd)
return -ENOMEM;
spi_set_drvdata(spi, lcd);
spi->mode = SPI_MODE_3;
lcd->spi = spi;
mutex_init(&lcd->mutex);
lcd->reset_gpio = devm_gpiod_get(&spi->dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(lcd->reset_gpio)) {
dev_err(&spi->dev, "failed to get reset GPIO\n");
return PTR_ERR(lcd->reset_gpio);
}
ret = acx565akm_detect(lcd);
if (ret < 0) {
dev_err(&spi->dev, "panel detection failed\n");
return ret;
}
if (lcd->has_bc) {
ret = acx565akm_backlight_init(lcd);
if (ret < 0)
return ret;
}
drm_panel_init(&lcd->panel, &lcd->spi->dev, &acx565akm_funcs,
DRM_MODE_CONNECTOR_DPI);
ret = drm_panel_add(&lcd->panel);
if (ret < 0) {
if (lcd->has_bc)
acx565akm_backlight_cleanup(lcd);
return ret;
}
return 0;
}
static int acx565akm_remove(struct spi_device *spi)
{
struct acx565akm_panel *lcd = spi_get_drvdata(spi);
drm_panel_remove(&lcd->panel);
if (lcd->has_bc)
acx565akm_backlight_cleanup(lcd);
drm_panel_disable(&lcd->panel);
drm_panel_unprepare(&lcd->panel);
return 0;
}
static const struct of_device_id acx565akm_of_match[] = {
{ .compatible = "sony,acx565akm", },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, acx565akm_of_match);
static const struct spi_device_id acx565akm_ids[] = {
{ "acx565akm", 0 },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(spi, acx565akm_ids);
static struct spi_driver acx565akm_driver = {
.probe = acx565akm_probe,
.remove = acx565akm_remove,
.id_table = acx565akm_ids,
.driver = {
.name = "panel-sony-acx565akm",
.of_match_table = acx565akm_of_match,
},
};
module_spi_driver(acx565akm_driver);
MODULE_AUTHOR("Nokia Corporation");
MODULE_DESCRIPTION("Sony ACX565AKM LCD Panel Driver");
MODULE_LICENSE("GPL");