| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2013 Red Hat |
| * Author: Rob Clark <robdclark@gmail.com> |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/pinctrl/consumer.h> |
| |
| #include "msm_kms.h" |
| #include "hdmi.h" |
| |
| struct hdmi_connector { |
| struct drm_connector base; |
| struct hdmi *hdmi; |
| struct work_struct hpd_work; |
| }; |
| #define to_hdmi_connector(x) container_of(x, struct hdmi_connector, base) |
| |
| static void msm_hdmi_phy_reset(struct hdmi *hdmi) |
| { |
| unsigned int val; |
| |
| val = hdmi_read(hdmi, REG_HDMI_PHY_CTRL); |
| |
| if (val & HDMI_PHY_CTRL_SW_RESET_LOW) { |
| /* pull low */ |
| hdmi_write(hdmi, REG_HDMI_PHY_CTRL, |
| val & ~HDMI_PHY_CTRL_SW_RESET); |
| } else { |
| /* pull high */ |
| hdmi_write(hdmi, REG_HDMI_PHY_CTRL, |
| val | HDMI_PHY_CTRL_SW_RESET); |
| } |
| |
| if (val & HDMI_PHY_CTRL_SW_RESET_PLL_LOW) { |
| /* pull low */ |
| hdmi_write(hdmi, REG_HDMI_PHY_CTRL, |
| val & ~HDMI_PHY_CTRL_SW_RESET_PLL); |
| } else { |
| /* pull high */ |
| hdmi_write(hdmi, REG_HDMI_PHY_CTRL, |
| val | HDMI_PHY_CTRL_SW_RESET_PLL); |
| } |
| |
| msleep(100); |
| |
| if (val & HDMI_PHY_CTRL_SW_RESET_LOW) { |
| /* pull high */ |
| hdmi_write(hdmi, REG_HDMI_PHY_CTRL, |
| val | HDMI_PHY_CTRL_SW_RESET); |
| } else { |
| /* pull low */ |
| hdmi_write(hdmi, REG_HDMI_PHY_CTRL, |
| val & ~HDMI_PHY_CTRL_SW_RESET); |
| } |
| |
| if (val & HDMI_PHY_CTRL_SW_RESET_PLL_LOW) { |
| /* pull high */ |
| hdmi_write(hdmi, REG_HDMI_PHY_CTRL, |
| val | HDMI_PHY_CTRL_SW_RESET_PLL); |
| } else { |
| /* pull low */ |
| hdmi_write(hdmi, REG_HDMI_PHY_CTRL, |
| val & ~HDMI_PHY_CTRL_SW_RESET_PLL); |
| } |
| } |
| |
| static int gpio_config(struct hdmi *hdmi, bool on) |
| { |
| const struct hdmi_platform_config *config = hdmi->config; |
| int i; |
| |
| if (on) { |
| for (i = 0; i < HDMI_MAX_NUM_GPIO; i++) { |
| struct hdmi_gpio_data gpio = config->gpios[i]; |
| |
| if (gpio.gpiod) { |
| if (gpio.output) { |
| gpiod_direction_output(gpio.gpiod, |
| gpio.value); |
| } else { |
| gpiod_direction_input(gpio.gpiod); |
| gpiod_set_value_cansleep(gpio.gpiod, |
| gpio.value); |
| } |
| } |
| } |
| |
| DBG("gpio on"); |
| } else { |
| for (i = 0; i < HDMI_MAX_NUM_GPIO; i++) { |
| struct hdmi_gpio_data gpio = config->gpios[i]; |
| |
| if (!gpio.gpiod) |
| continue; |
| |
| if (gpio.output) { |
| int value = gpio.value ? 0 : 1; |
| |
| gpiod_set_value_cansleep(gpio.gpiod, value); |
| } |
| } |
| |
| DBG("gpio off"); |
| } |
| |
| return 0; |
| } |
| |
| static void enable_hpd_clocks(struct hdmi *hdmi, bool enable) |
| { |
| const struct hdmi_platform_config *config = hdmi->config; |
| struct device *dev = &hdmi->pdev->dev; |
| int i, ret; |
| |
| if (enable) { |
| for (i = 0; i < config->hpd_clk_cnt; i++) { |
| if (config->hpd_freq && config->hpd_freq[i]) { |
| ret = clk_set_rate(hdmi->hpd_clks[i], |
| config->hpd_freq[i]); |
| if (ret) |
| dev_warn(dev, |
| "failed to set clk %s (%d)\n", |
| config->hpd_clk_names[i], ret); |
| } |
| |
| ret = clk_prepare_enable(hdmi->hpd_clks[i]); |
| if (ret) { |
| DRM_DEV_ERROR(dev, |
| "failed to enable hpd clk: %s (%d)\n", |
| config->hpd_clk_names[i], ret); |
| } |
| } |
| } else { |
| for (i = config->hpd_clk_cnt - 1; i >= 0; i--) |
| clk_disable_unprepare(hdmi->hpd_clks[i]); |
| } |
| } |
| |
| int msm_hdmi_hpd_enable(struct drm_connector *connector) |
| { |
| struct hdmi_connector *hdmi_connector = to_hdmi_connector(connector); |
| struct hdmi *hdmi = hdmi_connector->hdmi; |
| const struct hdmi_platform_config *config = hdmi->config; |
| struct device *dev = &hdmi->pdev->dev; |
| uint32_t hpd_ctrl; |
| int i, ret; |
| unsigned long flags; |
| |
| for (i = 0; i < config->hpd_reg_cnt; i++) { |
| ret = regulator_enable(hdmi->hpd_regs[i]); |
| if (ret) { |
| DRM_DEV_ERROR(dev, "failed to enable hpd regulator: %s (%d)\n", |
| config->hpd_reg_names[i], ret); |
| goto fail; |
| } |
| } |
| |
| ret = pinctrl_pm_select_default_state(dev); |
| if (ret) { |
| DRM_DEV_ERROR(dev, "pinctrl state chg failed: %d\n", ret); |
| goto fail; |
| } |
| |
| ret = gpio_config(hdmi, true); |
| if (ret) { |
| DRM_DEV_ERROR(dev, "failed to configure GPIOs: %d\n", ret); |
| goto fail; |
| } |
| |
| pm_runtime_get_sync(dev); |
| enable_hpd_clocks(hdmi, true); |
| |
| msm_hdmi_set_mode(hdmi, false); |
| msm_hdmi_phy_reset(hdmi); |
| msm_hdmi_set_mode(hdmi, true); |
| |
| hdmi_write(hdmi, REG_HDMI_USEC_REFTIMER, 0x0001001b); |
| |
| /* enable HPD events: */ |
| hdmi_write(hdmi, REG_HDMI_HPD_INT_CTRL, |
| HDMI_HPD_INT_CTRL_INT_CONNECT | |
| HDMI_HPD_INT_CTRL_INT_EN); |
| |
| /* set timeout to 4.1ms (max) for hardware debounce */ |
| spin_lock_irqsave(&hdmi->reg_lock, flags); |
| hpd_ctrl = hdmi_read(hdmi, REG_HDMI_HPD_CTRL); |
| hpd_ctrl |= HDMI_HPD_CTRL_TIMEOUT(0x1fff); |
| |
| /* Toggle HPD circuit to trigger HPD sense */ |
| hdmi_write(hdmi, REG_HDMI_HPD_CTRL, |
| ~HDMI_HPD_CTRL_ENABLE & hpd_ctrl); |
| hdmi_write(hdmi, REG_HDMI_HPD_CTRL, |
| HDMI_HPD_CTRL_ENABLE | hpd_ctrl); |
| spin_unlock_irqrestore(&hdmi->reg_lock, flags); |
| |
| return 0; |
| |
| fail: |
| return ret; |
| } |
| |
| static void hdp_disable(struct hdmi_connector *hdmi_connector) |
| { |
| struct hdmi *hdmi = hdmi_connector->hdmi; |
| const struct hdmi_platform_config *config = hdmi->config; |
| struct device *dev = &hdmi->pdev->dev; |
| int i, ret = 0; |
| |
| /* Disable HPD interrupt */ |
| hdmi_write(hdmi, REG_HDMI_HPD_INT_CTRL, 0); |
| |
| msm_hdmi_set_mode(hdmi, false); |
| |
| enable_hpd_clocks(hdmi, false); |
| pm_runtime_put_autosuspend(dev); |
| |
| ret = gpio_config(hdmi, false); |
| if (ret) |
| dev_warn(dev, "failed to unconfigure GPIOs: %d\n", ret); |
| |
| ret = pinctrl_pm_select_sleep_state(dev); |
| if (ret) |
| dev_warn(dev, "pinctrl state chg failed: %d\n", ret); |
| |
| for (i = 0; i < config->hpd_reg_cnt; i++) { |
| ret = regulator_disable(hdmi->hpd_regs[i]); |
| if (ret) |
| dev_warn(dev, "failed to disable hpd regulator: %s (%d)\n", |
| config->hpd_reg_names[i], ret); |
| } |
| } |
| |
| static void |
| msm_hdmi_hotplug_work(struct work_struct *work) |
| { |
| struct hdmi_connector *hdmi_connector = |
| container_of(work, struct hdmi_connector, hpd_work); |
| struct drm_connector *connector = &hdmi_connector->base; |
| drm_helper_hpd_irq_event(connector->dev); |
| } |
| |
| void msm_hdmi_connector_irq(struct drm_connector *connector) |
| { |
| struct hdmi_connector *hdmi_connector = to_hdmi_connector(connector); |
| struct hdmi *hdmi = hdmi_connector->hdmi; |
| uint32_t hpd_int_status, hpd_int_ctrl; |
| |
| /* Process HPD: */ |
| hpd_int_status = hdmi_read(hdmi, REG_HDMI_HPD_INT_STATUS); |
| hpd_int_ctrl = hdmi_read(hdmi, REG_HDMI_HPD_INT_CTRL); |
| |
| if ((hpd_int_ctrl & HDMI_HPD_INT_CTRL_INT_EN) && |
| (hpd_int_status & HDMI_HPD_INT_STATUS_INT)) { |
| bool detected = !!(hpd_int_status & HDMI_HPD_INT_STATUS_CABLE_DETECTED); |
| |
| /* ack & disable (temporarily) HPD events: */ |
| hdmi_write(hdmi, REG_HDMI_HPD_INT_CTRL, |
| HDMI_HPD_INT_CTRL_INT_ACK); |
| |
| DBG("status=%04x, ctrl=%04x", hpd_int_status, hpd_int_ctrl); |
| |
| /* detect disconnect if we are connected or visa versa: */ |
| hpd_int_ctrl = HDMI_HPD_INT_CTRL_INT_EN; |
| if (!detected) |
| hpd_int_ctrl |= HDMI_HPD_INT_CTRL_INT_CONNECT; |
| hdmi_write(hdmi, REG_HDMI_HPD_INT_CTRL, hpd_int_ctrl); |
| |
| queue_work(hdmi->workq, &hdmi_connector->hpd_work); |
| } |
| } |
| |
| static enum drm_connector_status detect_reg(struct hdmi *hdmi) |
| { |
| uint32_t hpd_int_status; |
| |
| pm_runtime_get_sync(&hdmi->pdev->dev); |
| enable_hpd_clocks(hdmi, true); |
| |
| hpd_int_status = hdmi_read(hdmi, REG_HDMI_HPD_INT_STATUS); |
| |
| enable_hpd_clocks(hdmi, false); |
| pm_runtime_put_autosuspend(&hdmi->pdev->dev); |
| |
| return (hpd_int_status & HDMI_HPD_INT_STATUS_CABLE_DETECTED) ? |
| connector_status_connected : connector_status_disconnected; |
| } |
| |
| #define HPD_GPIO_INDEX 2 |
| static enum drm_connector_status detect_gpio(struct hdmi *hdmi) |
| { |
| const struct hdmi_platform_config *config = hdmi->config; |
| struct hdmi_gpio_data hpd_gpio = config->gpios[HPD_GPIO_INDEX]; |
| |
| return gpiod_get_value(hpd_gpio.gpiod) ? |
| connector_status_connected : |
| connector_status_disconnected; |
| } |
| |
| static enum drm_connector_status hdmi_connector_detect( |
| struct drm_connector *connector, bool force) |
| { |
| struct hdmi_connector *hdmi_connector = to_hdmi_connector(connector); |
| struct hdmi *hdmi = hdmi_connector->hdmi; |
| const struct hdmi_platform_config *config = hdmi->config; |
| struct hdmi_gpio_data hpd_gpio = config->gpios[HPD_GPIO_INDEX]; |
| enum drm_connector_status stat_gpio, stat_reg; |
| int retry = 20; |
| |
| /* |
| * some platforms may not have hpd gpio. Rely only on the status |
| * provided by REG_HDMI_HPD_INT_STATUS in this case. |
| */ |
| if (!hpd_gpio.gpiod) |
| return detect_reg(hdmi); |
| |
| do { |
| stat_gpio = detect_gpio(hdmi); |
| stat_reg = detect_reg(hdmi); |
| |
| if (stat_gpio == stat_reg) |
| break; |
| |
| mdelay(10); |
| } while (--retry); |
| |
| /* the status we get from reading gpio seems to be more reliable, |
| * so trust that one the most if we didn't manage to get hdmi and |
| * gpio status to agree: |
| */ |
| if (stat_gpio != stat_reg) { |
| DBG("HDMI_HPD_INT_STATUS tells us: %d", stat_reg); |
| DBG("hpd gpio tells us: %d", stat_gpio); |
| } |
| |
| return stat_gpio; |
| } |
| |
| static void hdmi_connector_destroy(struct drm_connector *connector) |
| { |
| struct hdmi_connector *hdmi_connector = to_hdmi_connector(connector); |
| |
| hdp_disable(hdmi_connector); |
| |
| drm_connector_cleanup(connector); |
| |
| kfree(hdmi_connector); |
| } |
| |
| static int msm_hdmi_connector_get_modes(struct drm_connector *connector) |
| { |
| struct hdmi_connector *hdmi_connector = to_hdmi_connector(connector); |
| struct hdmi *hdmi = hdmi_connector->hdmi; |
| struct edid *edid; |
| uint32_t hdmi_ctrl; |
| int ret = 0; |
| |
| hdmi_ctrl = hdmi_read(hdmi, REG_HDMI_CTRL); |
| hdmi_write(hdmi, REG_HDMI_CTRL, hdmi_ctrl | HDMI_CTRL_ENABLE); |
| |
| edid = drm_get_edid(connector, hdmi->i2c); |
| |
| hdmi_write(hdmi, REG_HDMI_CTRL, hdmi_ctrl); |
| |
| hdmi->hdmi_mode = drm_detect_hdmi_monitor(edid); |
| drm_connector_update_edid_property(connector, edid); |
| |
| if (edid) { |
| ret = drm_add_edid_modes(connector, edid); |
| kfree(edid); |
| } |
| |
| return ret; |
| } |
| |
| static int msm_hdmi_connector_mode_valid(struct drm_connector *connector, |
| struct drm_display_mode *mode) |
| { |
| struct hdmi_connector *hdmi_connector = to_hdmi_connector(connector); |
| struct hdmi *hdmi = hdmi_connector->hdmi; |
| const struct hdmi_platform_config *config = hdmi->config; |
| struct msm_drm_private *priv = connector->dev->dev_private; |
| struct msm_kms *kms = priv->kms; |
| long actual, requested; |
| |
| requested = 1000 * mode->clock; |
| actual = kms->funcs->round_pixclk(kms, |
| requested, hdmi_connector->hdmi->encoder); |
| |
| /* for mdp5/apq8074, we manage our own pixel clk (as opposed to |
| * mdp4/dtv stuff where pixel clk is assigned to mdp/encoder |
| * instead): |
| */ |
| if (config->pwr_clk_cnt > 0) |
| actual = clk_round_rate(hdmi->pwr_clks[0], actual); |
| |
| DBG("requested=%ld, actual=%ld", requested, actual); |
| |
| if (actual != requested) |
| return MODE_CLOCK_RANGE; |
| |
| return 0; |
| } |
| |
| static const struct drm_connector_funcs hdmi_connector_funcs = { |
| .detect = hdmi_connector_detect, |
| .fill_modes = drm_helper_probe_single_connector_modes, |
| .destroy = hdmi_connector_destroy, |
| .reset = drm_atomic_helper_connector_reset, |
| .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, |
| .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, |
| }; |
| |
| static const struct drm_connector_helper_funcs msm_hdmi_connector_helper_funcs = { |
| .get_modes = msm_hdmi_connector_get_modes, |
| .mode_valid = msm_hdmi_connector_mode_valid, |
| }; |
| |
| /* initialize connector */ |
| struct drm_connector *msm_hdmi_connector_init(struct hdmi *hdmi) |
| { |
| struct drm_connector *connector = NULL; |
| struct hdmi_connector *hdmi_connector; |
| |
| hdmi_connector = kzalloc(sizeof(*hdmi_connector), GFP_KERNEL); |
| if (!hdmi_connector) |
| return ERR_PTR(-ENOMEM); |
| |
| hdmi_connector->hdmi = hdmi; |
| INIT_WORK(&hdmi_connector->hpd_work, msm_hdmi_hotplug_work); |
| |
| connector = &hdmi_connector->base; |
| |
| drm_connector_init_with_ddc(hdmi->dev, connector, |
| &hdmi_connector_funcs, |
| DRM_MODE_CONNECTOR_HDMIA, |
| hdmi->i2c); |
| drm_connector_helper_add(connector, &msm_hdmi_connector_helper_funcs); |
| |
| connector->polled = DRM_CONNECTOR_POLL_CONNECT | |
| DRM_CONNECTOR_POLL_DISCONNECT; |
| |
| connector->interlace_allowed = 0; |
| connector->doublescan_allowed = 0; |
| |
| drm_connector_attach_encoder(connector, hdmi->encoder); |
| |
| return connector; |
| } |