| // SPDX-License-Identifier: GPL-2.0 |
| /* Copyright(c) 2013 - 2019 Intel Corporation. */ |
| |
| #include "fm10k.h" |
| |
| /** |
| * fm10k_dcbnl_ieee_getets - get the ETS configuration for the device |
| * @dev: netdev interface for the device |
| * @ets: ETS structure to push configuration to |
| **/ |
| static int fm10k_dcbnl_ieee_getets(struct net_device *dev, struct ieee_ets *ets) |
| { |
| int i; |
| |
| /* we support 8 TCs in all modes */ |
| ets->ets_cap = IEEE_8021QAZ_MAX_TCS; |
| ets->cbs = 0; |
| |
| /* we only support strict priority and cannot do traffic shaping */ |
| memset(ets->tc_tx_bw, 0, sizeof(ets->tc_tx_bw)); |
| memset(ets->tc_rx_bw, 0, sizeof(ets->tc_rx_bw)); |
| memset(ets->tc_tsa, IEEE_8021QAZ_TSA_STRICT, sizeof(ets->tc_tsa)); |
| |
| /* populate the prio map based on the netdev */ |
| for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) |
| ets->prio_tc[i] = netdev_get_prio_tc_map(dev, i); |
| |
| return 0; |
| } |
| |
| /** |
| * fm10k_dcbnl_ieee_setets - set the ETS configuration for the device |
| * @dev: netdev interface for the device |
| * @ets: ETS structure to pull configuration from |
| **/ |
| static int fm10k_dcbnl_ieee_setets(struct net_device *dev, struct ieee_ets *ets) |
| { |
| u8 num_tc = 0; |
| int i; |
| |
| /* verify type and determine num_tcs needed */ |
| for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) { |
| if (ets->tc_tx_bw[i] || ets->tc_rx_bw[i]) |
| return -EINVAL; |
| if (ets->tc_tsa[i] != IEEE_8021QAZ_TSA_STRICT) |
| return -EINVAL; |
| if (ets->prio_tc[i] > num_tc) |
| num_tc = ets->prio_tc[i]; |
| } |
| |
| /* if requested TC is greater than 0 then num_tcs is max + 1 */ |
| if (num_tc) |
| num_tc++; |
| |
| if (num_tc > IEEE_8021QAZ_MAX_TCS) |
| return -EINVAL; |
| |
| /* update TC hardware mapping if necessary */ |
| if (num_tc != netdev_get_num_tc(dev)) { |
| int err = fm10k_setup_tc(dev, num_tc); |
| if (err) |
| return err; |
| } |
| |
| /* update priority mapping */ |
| for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) |
| netdev_set_prio_tc_map(dev, i, ets->prio_tc[i]); |
| |
| return 0; |
| } |
| |
| /** |
| * fm10k_dcbnl_ieee_getpfc - get the PFC configuration for the device |
| * @dev: netdev interface for the device |
| * @pfc: PFC structure to push configuration to |
| **/ |
| static int fm10k_dcbnl_ieee_getpfc(struct net_device *dev, struct ieee_pfc *pfc) |
| { |
| struct fm10k_intfc *interface = netdev_priv(dev); |
| |
| /* record flow control max count and state of TCs */ |
| pfc->pfc_cap = IEEE_8021QAZ_MAX_TCS; |
| pfc->pfc_en = interface->pfc_en; |
| |
| return 0; |
| } |
| |
| /** |
| * fm10k_dcbnl_ieee_setpfc - set the PFC configuration for the device |
| * @dev: netdev interface for the device |
| * @pfc: PFC structure to pull configuration from |
| **/ |
| static int fm10k_dcbnl_ieee_setpfc(struct net_device *dev, struct ieee_pfc *pfc) |
| { |
| struct fm10k_intfc *interface = netdev_priv(dev); |
| |
| /* record PFC configuration to interface */ |
| interface->pfc_en = pfc->pfc_en; |
| |
| /* if we are running update the drop_en state for all queues */ |
| if (netif_running(dev)) |
| fm10k_update_rx_drop_en(interface); |
| |
| return 0; |
| } |
| |
| /** |
| * fm10k_dcbnl_ieee_getdcbx - get the DCBX configuration for the device |
| * @dev: netdev interface for the device |
| * |
| * Returns that we support only IEEE DCB for this interface |
| **/ |
| static u8 fm10k_dcbnl_getdcbx(struct net_device __always_unused *dev) |
| { |
| return DCB_CAP_DCBX_HOST | DCB_CAP_DCBX_VER_IEEE; |
| } |
| |
| /** |
| * fm10k_dcbnl_ieee_setdcbx - get the DCBX configuration for the device |
| * @dev: netdev interface for the device |
| * @mode: new mode for this device |
| * |
| * Returns error on attempt to enable anything but IEEE DCB for this interface |
| **/ |
| static u8 fm10k_dcbnl_setdcbx(struct net_device __always_unused *dev, u8 mode) |
| { |
| return (mode != (DCB_CAP_DCBX_HOST | DCB_CAP_DCBX_VER_IEEE)) ? 1 : 0; |
| } |
| |
| static const struct dcbnl_rtnl_ops fm10k_dcbnl_ops = { |
| .ieee_getets = fm10k_dcbnl_ieee_getets, |
| .ieee_setets = fm10k_dcbnl_ieee_setets, |
| .ieee_getpfc = fm10k_dcbnl_ieee_getpfc, |
| .ieee_setpfc = fm10k_dcbnl_ieee_setpfc, |
| |
| .getdcbx = fm10k_dcbnl_getdcbx, |
| .setdcbx = fm10k_dcbnl_setdcbx, |
| }; |
| |
| /** |
| * fm10k_dcbnl_set_ops - Configures dcbnl ops pointer for netdev |
| * @dev: netdev interface for the device |
| * |
| * Enables PF for DCB by assigning DCBNL ops pointer. |
| **/ |
| void fm10k_dcbnl_set_ops(struct net_device *dev) |
| { |
| struct fm10k_intfc *interface = netdev_priv(dev); |
| struct fm10k_hw *hw = &interface->hw; |
| |
| if (hw->mac.type == fm10k_mac_pf) |
| dev->dcbnl_ops = &fm10k_dcbnl_ops; |
| } |