| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Framebuffer driver for mdpy (mediated virtual pci display device). |
| * |
| * See mdpy-defs.h for device specs |
| * |
| * (c) Gerd Hoffmann <kraxel@redhat.com> |
| * |
| * Using some code snippets from simplefb and cirrusfb. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| */ |
| #include <linux/errno.h> |
| #include <linux/fb.h> |
| #include <linux/io.h> |
| #include <linux/pci.h> |
| #include <linux/module.h> |
| #include <drm/drm_fourcc.h> |
| #include "mdpy-defs.h" |
| |
| static const struct fb_fix_screeninfo mdpy_fb_fix = { |
| .id = "mdpy-fb", |
| .type = FB_TYPE_PACKED_PIXELS, |
| .visual = FB_VISUAL_TRUECOLOR, |
| .accel = FB_ACCEL_NONE, |
| }; |
| |
| static const struct fb_var_screeninfo mdpy_fb_var = { |
| .height = -1, |
| .width = -1, |
| .activate = FB_ACTIVATE_NOW, |
| .vmode = FB_VMODE_NONINTERLACED, |
| |
| .bits_per_pixel = 32, |
| .transp.offset = 24, |
| .red.offset = 16, |
| .green.offset = 8, |
| .blue.offset = 0, |
| .transp.length = 8, |
| .red.length = 8, |
| .green.length = 8, |
| .blue.length = 8, |
| }; |
| |
| #define PSEUDO_PALETTE_SIZE 16 |
| |
| struct mdpy_fb_par { |
| u32 palette[PSEUDO_PALETTE_SIZE]; |
| }; |
| |
| static int mdpy_fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, |
| u_int transp, struct fb_info *info) |
| { |
| u32 *pal = info->pseudo_palette; |
| u32 cr = red >> (16 - info->var.red.length); |
| u32 cg = green >> (16 - info->var.green.length); |
| u32 cb = blue >> (16 - info->var.blue.length); |
| u32 value, mask; |
| |
| if (regno >= PSEUDO_PALETTE_SIZE) |
| return -EINVAL; |
| |
| value = (cr << info->var.red.offset) | |
| (cg << info->var.green.offset) | |
| (cb << info->var.blue.offset); |
| if (info->var.transp.length > 0) { |
| mask = (1 << info->var.transp.length) - 1; |
| mask <<= info->var.transp.offset; |
| value |= mask; |
| } |
| pal[regno] = value; |
| |
| return 0; |
| } |
| |
| static void mdpy_fb_destroy(struct fb_info *info) |
| { |
| if (info->screen_base) |
| iounmap(info->screen_base); |
| } |
| |
| static const struct fb_ops mdpy_fb_ops = { |
| .owner = THIS_MODULE, |
| .fb_destroy = mdpy_fb_destroy, |
| .fb_setcolreg = mdpy_fb_setcolreg, |
| .fb_fillrect = cfb_fillrect, |
| .fb_copyarea = cfb_copyarea, |
| .fb_imageblit = cfb_imageblit, |
| }; |
| |
| static int mdpy_fb_probe(struct pci_dev *pdev, |
| const struct pci_device_id *ent) |
| { |
| struct fb_info *info; |
| struct mdpy_fb_par *par; |
| u32 format, width, height; |
| int ret; |
| |
| ret = pci_enable_device(pdev); |
| if (ret < 0) |
| return ret; |
| |
| ret = pci_request_regions(pdev, "mdpy-fb"); |
| if (ret < 0) |
| return ret; |
| |
| pci_read_config_dword(pdev, MDPY_FORMAT_OFFSET, &format); |
| pci_read_config_dword(pdev, MDPY_WIDTH_OFFSET, &width); |
| pci_read_config_dword(pdev, MDPY_HEIGHT_OFFSET, &height); |
| if (format != DRM_FORMAT_XRGB8888) { |
| pci_err(pdev, "format mismatch (0x%x != 0x%x)\n", |
| format, DRM_FORMAT_XRGB8888); |
| return -EINVAL; |
| } |
| if (width < 100 || width > 10000) { |
| pci_err(pdev, "width (%d) out of range\n", width); |
| return -EINVAL; |
| } |
| if (height < 100 || height > 10000) { |
| pci_err(pdev, "height (%d) out of range\n", height); |
| return -EINVAL; |
| } |
| pci_info(pdev, "mdpy found: %dx%d framebuffer\n", |
| width, height); |
| |
| info = framebuffer_alloc(sizeof(struct mdpy_fb_par), &pdev->dev); |
| if (!info) |
| goto err_release_regions; |
| pci_set_drvdata(pdev, info); |
| par = info->par; |
| |
| info->fix = mdpy_fb_fix; |
| info->fix.smem_start = pci_resource_start(pdev, 0); |
| info->fix.smem_len = pci_resource_len(pdev, 0); |
| info->fix.line_length = width * 4; |
| |
| info->var = mdpy_fb_var; |
| info->var.xres = width; |
| info->var.yres = height; |
| info->var.xres_virtual = width; |
| info->var.yres_virtual = height; |
| |
| info->screen_size = info->fix.smem_len; |
| info->screen_base = ioremap(info->fix.smem_start, |
| info->screen_size); |
| if (!info->screen_base) { |
| pci_err(pdev, "ioremap(pcibar) failed\n"); |
| ret = -EIO; |
| goto err_release_fb; |
| } |
| |
| info->apertures = alloc_apertures(1); |
| if (!info->apertures) { |
| ret = -ENOMEM; |
| goto err_unmap; |
| } |
| info->apertures->ranges[0].base = info->fix.smem_start; |
| info->apertures->ranges[0].size = info->fix.smem_len; |
| |
| info->fbops = &mdpy_fb_ops; |
| info->flags = FBINFO_DEFAULT; |
| info->pseudo_palette = par->palette; |
| |
| ret = register_framebuffer(info); |
| if (ret < 0) { |
| pci_err(pdev, "mdpy-fb device register failed: %d\n", ret); |
| goto err_unmap; |
| } |
| |
| pci_info(pdev, "fb%d registered\n", info->node); |
| return 0; |
| |
| err_unmap: |
| iounmap(info->screen_base); |
| |
| err_release_fb: |
| framebuffer_release(info); |
| |
| err_release_regions: |
| pci_release_regions(pdev); |
| |
| return ret; |
| } |
| |
| static void mdpy_fb_remove(struct pci_dev *pdev) |
| { |
| struct fb_info *info = pci_get_drvdata(pdev); |
| |
| unregister_framebuffer(info); |
| framebuffer_release(info); |
| } |
| |
| static struct pci_device_id mdpy_fb_pci_table[] = { |
| { |
| .vendor = MDPY_PCI_VENDOR_ID, |
| .device = MDPY_PCI_DEVICE_ID, |
| .subvendor = MDPY_PCI_SUBVENDOR_ID, |
| .subdevice = MDPY_PCI_SUBDEVICE_ID, |
| }, { |
| /* end of list */ |
| } |
| }; |
| |
| static struct pci_driver mdpy_fb_pci_driver = { |
| .name = "mdpy-fb", |
| .id_table = mdpy_fb_pci_table, |
| .probe = mdpy_fb_probe, |
| .remove = mdpy_fb_remove, |
| }; |
| |
| static int __init mdpy_fb_init(void) |
| { |
| int ret; |
| |
| ret = pci_register_driver(&mdpy_fb_pci_driver); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| module_init(mdpy_fb_init); |
| |
| MODULE_DEVICE_TABLE(pci, mdpy_fb_pci_table); |
| MODULE_LICENSE("GPL v2"); |