| Texas Instruments OMAP4 Display Subsystem |
| ========================================= |
| |
| See Documentation/devicetree/bindings/display/ti/ti,omap-dss.txt for generic |
| description about OMAP Display Subsystem bindings. |
| |
| DSS Core |
| -------- |
| |
| Required properties: |
| - compatible: "ti,omap4-dss" |
| - reg: address and length of the register space |
| - ti,hwmods: "dss_core" |
| - clocks: handle to fclk |
| - clock-names: "fck" |
| |
| Required nodes: |
| - DISPC |
| |
| Optional nodes: |
| - DSS Submodules: RFBI, VENC, DSI, HDMI |
| - Video port for DPI output |
| |
| DPI Endpoint required properties: |
| - data-lines: number of lines used |
| |
| |
| DISPC |
| ----- |
| |
| Required properties: |
| - compatible: "ti,omap4-dispc" |
| - reg: address and length of the register space |
| - ti,hwmods: "dss_dispc" |
| - interrupts: the DISPC interrupt |
| - clocks: handle to fclk |
| - clock-names: "fck" |
| |
| |
| RFBI |
| ---- |
| |
| Required properties: |
| - compatible: "ti,omap4-rfbi" |
| - reg: address and length of the register space |
| - ti,hwmods: "dss_rfbi" |
| - clocks: handles to fclk and iclk |
| - clock-names: "fck", "ick" |
| |
| Optional nodes: |
| - Video port for RFBI output |
| - RFBI controlled peripherals |
| |
| |
| VENC |
| ---- |
| |
| Required properties: |
| - compatible: "ti,omap4-venc" |
| - reg: address and length of the register space |
| - ti,hwmods: "dss_venc" |
| - vdda-supply: power supply for DAC |
| - clocks: handle to fclk |
| - clock-names: "fck" |
| |
| Optional nodes: |
| - Video port for VENC output |
| |
| VENC Endpoint required properties: |
| - ti,invert-polarity: invert the polarity of the video signal |
| - ti,channels: 1 for composite, 2 for s-video |
| |
| |
| DSI |
| --- |
| |
| Required properties: |
| - compatible: "ti,omap4-dsi" |
| - reg: addresses and lengths of the register spaces for 'proto', 'phy' and 'pll' |
| - reg-names: "proto", "phy", "pll" |
| - interrupts: the DSI interrupt line |
| - ti,hwmods: "dss_dsi1" or "dss_dsi2" |
| - vdd-supply: power supply for DSI |
| - clocks: handles to fclk and pll clock |
| - clock-names: "fck", "sys_clk" |
| |
| Optional nodes: |
| - Video port for DSI output |
| - DSI controlled peripherals |
| |
| DSI Endpoint required properties: |
| - lanes: list of pin numbers for the DSI lanes: CLK+, CLK-, DATA0+, DATA0-, |
| DATA1+, DATA1-, ... |
| |
| |
| HDMI |
| ---- |
| |
| Required properties: |
| - compatible: "ti,omap4-hdmi" |
| - reg: addresses and lengths of the register spaces for 'wp', 'pll', 'phy', |
| 'core' |
| - reg-names: "wp", "pll", "phy", "core" |
| - interrupts: the HDMI interrupt line |
| - ti,hwmods: "dss_hdmi" |
| - vdda-supply: vdda power supply |
| - clocks: handles to fclk and pll clock |
| - clock-names: "fck", "sys_clk" |
| |
| Optional nodes: |
| - Video port for HDMI output |
| |
| HDMI Endpoint optional properties: |
| - lanes: list of 8 pin numbers for the HDMI lanes: CLK+, CLK-, D0+, D0-, |
| D1+, D1-, D2+, D2-. (default: 0,1,2,3,4,5,6,7) |
