| #include <linux/module.h> |
| #include <linux/smp.h> |
| #include <linux/time.h> |
| #include <linux/errno.h> |
| #include <linux/timex.h> |
| #include <linux/clocksource.h> |
| #include <asm/io.h> |
| |
| /* IBM Summit (EXA) Cyclone counter code*/ |
| #define CYCLONE_CBAR_ADDR 0xFEB00CD0 |
| #define CYCLONE_PMCC_OFFSET 0x51A0 |
| #define CYCLONE_MPMC_OFFSET 0x51D0 |
| #define CYCLONE_MPCS_OFFSET 0x51A8 |
| #define CYCLONE_TIMER_FREQ 100000000 |
| |
| int use_cyclone; |
| void __init cyclone_setup(void) |
| { |
| use_cyclone = 1; |
| } |
| |
| static void __iomem *cyclone_mc; |
| |
| static cycle_t read_cyclone(struct clocksource *cs) |
| { |
| return (cycle_t)readq((void __iomem *)cyclone_mc); |
| } |
| |
| static struct clocksource clocksource_cyclone = { |
| .name = "cyclone", |
| .rating = 300, |
| .read = read_cyclone, |
| .mask = (1LL << 40) - 1, |
| .mult = 0, /*to be caluclated*/ |
| .shift = 16, |
| .flags = CLOCK_SOURCE_IS_CONTINUOUS, |
| }; |
| |
| int __init init_cyclone_clock(void) |
| { |
| u64 __iomem *reg; |
| u64 base; /* saved cyclone base address */ |
| u64 offset; /* offset from pageaddr to cyclone_timer register */ |
| int i; |
| u32 __iomem *cyclone_timer; /* Cyclone MPMC0 register */ |
| |
| if (!use_cyclone) |
| return 0; |
| |
| printk(KERN_INFO "Summit chipset: Starting Cyclone Counter.\n"); |
| |
| /* find base address */ |
| offset = (CYCLONE_CBAR_ADDR); |
| reg = ioremap_nocache(offset, sizeof(u64)); |
| if(!reg){ |
| printk(KERN_ERR "Summit chipset: Could not find valid CBAR" |
| " register.\n"); |
| use_cyclone = 0; |
| return -ENODEV; |
| } |
| base = readq(reg); |
| iounmap(reg); |
| if(!base){ |
| printk(KERN_ERR "Summit chipset: Could not find valid CBAR" |
| " value.\n"); |
| use_cyclone = 0; |
| return -ENODEV; |
| } |
| |
| /* setup PMCC */ |
| offset = (base + CYCLONE_PMCC_OFFSET); |
| reg = ioremap_nocache(offset, sizeof(u64)); |
| if(!reg){ |
| printk(KERN_ERR "Summit chipset: Could not find valid PMCC" |
| " register.\n"); |
| use_cyclone = 0; |
| return -ENODEV; |
| } |
| writel(0x00000001,reg); |
| iounmap(reg); |
| |
| /* setup MPCS */ |
| offset = (base + CYCLONE_MPCS_OFFSET); |
| reg = ioremap_nocache(offset, sizeof(u64)); |
| if(!reg){ |
| printk(KERN_ERR "Summit chipset: Could not find valid MPCS" |
| " register.\n"); |
| use_cyclone = 0; |
| return -ENODEV; |
| } |
| writel(0x00000001,reg); |
| iounmap(reg); |
| |
| /* map in cyclone_timer */ |
| offset = (base + CYCLONE_MPMC_OFFSET); |
| cyclone_timer = ioremap_nocache(offset, sizeof(u32)); |
| if(!cyclone_timer){ |
| printk(KERN_ERR "Summit chipset: Could not find valid MPMC" |
| " register.\n"); |
| use_cyclone = 0; |
| return -ENODEV; |
| } |
| |
| /*quick test to make sure its ticking*/ |
| for(i=0; i<3; i++){ |
| u32 old = readl(cyclone_timer); |
| int stall = 100; |
| while(stall--) barrier(); |
| if(readl(cyclone_timer) == old){ |
| printk(KERN_ERR "Summit chipset: Counter not counting!" |
| " DISABLED\n"); |
| iounmap(cyclone_timer); |
| cyclone_timer = NULL; |
| use_cyclone = 0; |
| return -ENODEV; |
| } |
| } |
| /* initialize last tick */ |
| cyclone_mc = cyclone_timer; |
| clocksource_cyclone.fsys_mmio = cyclone_timer; |
| clocksource_cyclone.mult = clocksource_hz2mult(CYCLONE_TIMER_FREQ, |
| clocksource_cyclone.shift); |
| clocksource_register(&clocksource_cyclone); |
| |
| return 0; |
| } |
| |
| __initcall(init_cyclone_clock); |