blob: 2a98d9c9202ed105784f14030f54cdc7efbc1278 [file] [log] [blame]
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# Testing and monitor the cpu desire performance, frequency, load,
# power consumption and throughput etc.when this script trigger tbench
# test cases.
# 1) Run tbench benchmark on specific governors, ondemand or schedutil.
# 2) Run tbench benchmark comparative test on acpi-cpufreq kernel driver.
# 3) Get desire performance, frequency, load by perf.
# 4) Get power consumption and throughput by amd_pstate_trace.py.
# 5) Analyse test results and save it in file selftest.tbench.csv.
# 6) Plot png images about performance, energy and performance per watt for each test.
# protect against multiple inclusion
if [ $FILE_TBENCH ]; then
return 0
else
FILE_TBENCH=DONE
fi
tbench_governors=("ondemand" "schedutil")
# $1: governor, $2: round, $3: des-perf, $4: freq, $5: load, $6: performance, $7: energy, $8: performance per watt
store_csv_tbench()
{
echo "$1, $2, $3, $4, $5, $6, $7, $8" | tee -a $OUTFILE_TBENCH.csv > /dev/null 2>&1
}
# clear some special lines
clear_csv_tbench()
{
if [ -f $OUTFILE_TBENCH.csv ]; then
sed -i '/Comprison(%)/d' $OUTFILE_TBENCH.csv
sed -i "/$(scaling_name)/d" $OUTFILE_TBENCH.csv
fi
}
# find string $1 in file csv and get the number of lines
get_lines_csv_tbench()
{
if [ -f $OUTFILE_TBENCH.csv ]; then
return `grep -c "$1" $OUTFILE_TBENCH.csv`
else
return 0
fi
}
pre_clear_tbench()
{
post_clear_tbench
rm -rf tbench_*.png
clear_csv_tbench
}
post_clear_tbench()
{
rm -rf results/tracer-tbench*
rm -rf $OUTFILE_TBENCH*.log
rm -rf $OUTFILE_TBENCH*.result
}
# $1: governor, $2: loop
run_tbench()
{
echo "Launching amd pstate tracer for $1 #$2 tracer_interval: $TRACER_INTERVAL"
$TRACER -n tracer-tbench-$1-$2 -i $TRACER_INTERVAL > /dev/null 2>&1 &
printf "Test tbench for $1 #$2 time_limit: $TIME_LIMIT procs_num: $PROCESS_NUM\n"
tbench_srv > /dev/null 2>&1 &
$PERF stat -a --per-socket -I 1000 -e power/energy-pkg/ tbench -t $TIME_LIMIT $PROCESS_NUM > $OUTFILE_TBENCH-perf-$1-$2.log 2>&1
pid=`pidof tbench_srv`
kill $pid
for job in `jobs -p`
do
echo "Waiting for job id $job"
wait $job
done
}
# $1: governor, $2: loop
parse_tbench()
{
awk '{print $5}' results/tracer-tbench-$1-$2/cpu.csv | sed -e '1d' | sed s/,// > $OUTFILE_TBENCH-des-perf-$1-$2.log
avg_des_perf=$(awk 'BEGIN {i=0; sum=0};{i++; sum += $1};END {print sum/i}' $OUTFILE_TBENCH-des-perf-$1-$2.log)
printf "Tbench-$1-#$2 avg des perf: $avg_des_perf\n" | tee -a $OUTFILE_TBENCH.result
awk '{print $7}' results/tracer-tbench-$1-$2/cpu.csv | sed -e '1d' | sed s/,// > $OUTFILE_TBENCH-freq-$1-$2.log
avg_freq=$(awk 'BEGIN {i=0; sum=0};{i++; sum += $1};END {print sum/i}' $OUTFILE_TBENCH-freq-$1-$2.log)
printf "Tbench-$1-#$2 avg freq: $avg_freq\n" | tee -a $OUTFILE_TBENCH.result
awk '{print $11}' results/tracer-tbench-$1-$2/cpu.csv | sed -e '1d' | sed s/,// > $OUTFILE_TBENCH-load-$1-$2.log
avg_load=$(awk 'BEGIN {i=0; sum=0};{i++; sum += $1};END {print sum/i}' $OUTFILE_TBENCH-load-$1-$2.log)
printf "Tbench-$1-#$2 avg load: $avg_load\n" | tee -a $OUTFILE_TBENCH.result
grep Throughput $OUTFILE_TBENCH-perf-$1-$2.log | awk '{print $2}' > $OUTFILE_TBENCH-throughput-$1-$2.log
tp_sum=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum}' $OUTFILE_TBENCH-throughput-$1-$2.log)
printf "Tbench-$1-#$2 throughput(MB/s): $tp_sum\n" | tee -a $OUTFILE_TBENCH.result
grep Joules $OUTFILE_TBENCH-perf-$1-$2.log | awk '{print $4}' > $OUTFILE_TBENCH-energy-$1-$2.log
en_sum=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum}' $OUTFILE_TBENCH-energy-$1-$2.log)
printf "Tbench-$1-#$2 power consumption(J): $en_sum\n" | tee -a $OUTFILE_TBENCH.result
# Permance is throughput per second, denoted T/t, where T is throught rendered in t seconds.
# It is well known that P=E/t, where P is power measured in watts(W), E is energy measured in joules(J),
# and t is time measured in seconds(s). This means that performance per watt becomes
# T/t T/t T
# --- = --- = ---
# P E/t E
# with unit given by MB per joule.
ppw=`echo "scale=4;($TIME_LIMIT-1)*$tp_sum/$en_sum" | bc | awk '{printf "%.4f", $0}'`
printf "Tbench-$1-#$2 performance per watt(MB/J): $ppw\n" | tee -a $OUTFILE_TBENCH.result
printf "\n" | tee -a $OUTFILE_TBENCH.result
driver_name=`echo $(scaling_name)`
store_csv_tbench "$driver_name-$1" $2 $avg_des_perf $avg_freq $avg_load $tp_sum $en_sum $ppw
}
# $1: governor
loop_tbench()
{
printf "\nTbench total test times is $LOOP_TIMES for $1\n\n"
for i in `seq 1 $LOOP_TIMES`
do
run_tbench $1 $i
parse_tbench $1 $i
done
}
# $1: governor
gather_tbench()
{
printf "Tbench test result for $1 (loops:$LOOP_TIMES)" | tee -a $OUTFILE_TBENCH.result
printf "\n--------------------------------------------------\n" | tee -a $OUTFILE_TBENCH.result
grep "Tbench-$1-#" $OUTFILE_TBENCH.result | grep "avg des perf:" | awk '{print $NF}' > $OUTFILE_TBENCH-des-perf-$1.log
avg_des_perf=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum/'$LOOP_TIMES'}' $OUTFILE_TBENCH-des-perf-$1.log)
printf "Tbench-$1 avg des perf: $avg_des_perf\n" | tee -a $OUTFILE_TBENCH.result
grep "Tbench-$1-#" $OUTFILE_TBENCH.result | grep "avg freq:" | awk '{print $NF}' > $OUTFILE_TBENCH-freq-$1.log
avg_freq=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum/'$LOOP_TIMES'}' $OUTFILE_TBENCH-freq-$1.log)
printf "Tbench-$1 avg freq: $avg_freq\n" | tee -a $OUTFILE_TBENCH.result
grep "Tbench-$1-#" $OUTFILE_TBENCH.result | grep "avg load:" | awk '{print $NF}' > $OUTFILE_TBENCH-load-$1.log
avg_load=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum/'$LOOP_TIMES'}' $OUTFILE_TBENCH-load-$1.log)
printf "Tbench-$1 avg load: $avg_load\n" | tee -a $OUTFILE_TBENCH.result
grep "Tbench-$1-#" $OUTFILE_TBENCH.result | grep "throughput(MB/s):" | awk '{print $NF}' > $OUTFILE_TBENCH-throughput-$1.log
tp_sum=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum}' $OUTFILE_TBENCH-throughput-$1.log)
printf "Tbench-$1 total throughput(MB/s): $tp_sum\n" | tee -a $OUTFILE_TBENCH.result
avg_tp=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum/'$LOOP_TIMES'}' $OUTFILE_TBENCH-throughput-$1.log)
printf "Tbench-$1 avg throughput(MB/s): $avg_tp\n" | tee -a $OUTFILE_TBENCH.result
grep "Tbench-$1-#" $OUTFILE_TBENCH.result | grep "power consumption(J):" | awk '{print $NF}' > $OUTFILE_TBENCH-energy-$1.log
en_sum=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum}' $OUTFILE_TBENCH-energy-$1.log)
printf "Tbench-$1 total power consumption(J): $en_sum\n" | tee -a $OUTFILE_TBENCH.result
avg_en=$(awk 'BEGIN {sum=0};{sum += $1};END {print sum/'$LOOP_TIMES'}' $OUTFILE_TBENCH-energy-$1.log)
printf "Tbench-$1 avg power consumption(J): $avg_en\n" | tee -a $OUTFILE_TBENCH.result
# Permance is throughput per second, denoted T/t, where T is throught rendered in t seconds.
# It is well known that P=E/t, where P is power measured in watts(W), E is energy measured in joules(J),
# and t is time measured in seconds(s). This means that performance per watt becomes
# T/t T/t T
# --- = --- = ---
# P E/t E
# with unit given by MB per joule.
ppw=`echo "scale=4;($TIME_LIMIT-1)*$avg_tp/$avg_en" | bc | awk '{printf "%.4f", $0}'`
printf "Tbench-$1 performance per watt(MB/J): $ppw\n" | tee -a $OUTFILE_TBENCH.result
printf "\n" | tee -a $OUTFILE_TBENCH.result
driver_name=`echo $(scaling_name)`
store_csv_tbench "$driver_name-$1" "Average" $avg_des_perf $avg_freq $avg_load $avg_tp $avg_en $ppw
}
# $1: base scaling_driver $2: base governor $3: comparative scaling_driver $4: comparative governor
__calc_comp_tbench()
{
base=`grep "$1-$2" $OUTFILE_TBENCH.csv | grep "Average"`
comp=`grep "$3-$4" $OUTFILE_TBENCH.csv | grep "Average"`
if [ -n "$base" -a -n "$comp" ]; then
printf "\n==================================================\n" | tee -a $OUTFILE_TBENCH.result
printf "Tbench comparison $1-$2 VS $3-$4" | tee -a $OUTFILE_TBENCH.result
printf "\n==================================================\n" | tee -a $OUTFILE_TBENCH.result
# get the base values
des_perf_base=`echo "$base" | awk '{print $3}' | sed s/,//`
freq_base=`echo "$base" | awk '{print $4}' | sed s/,//`
load_base=`echo "$base" | awk '{print $5}' | sed s/,//`
perf_base=`echo "$base" | awk '{print $6}' | sed s/,//`
energy_base=`echo "$base" | awk '{print $7}' | sed s/,//`
ppw_base=`echo "$base" | awk '{print $8}' | sed s/,//`
# get the comparative values
des_perf_comp=`echo "$comp" | awk '{print $3}' | sed s/,//`
freq_comp=`echo "$comp" | awk '{print $4}' | sed s/,//`
load_comp=`echo "$comp" | awk '{print $5}' | sed s/,//`
perf_comp=`echo "$comp" | awk '{print $6}' | sed s/,//`
energy_comp=`echo "$comp" | awk '{print $7}' | sed s/,//`
ppw_comp=`echo "$comp" | awk '{print $8}' | sed s/,//`
# compare the base and comp values
des_perf_drop=`echo "scale=4;($des_perf_comp-$des_perf_base)*100/$des_perf_base" | bc | awk '{printf "%.4f", $0}'`
printf "Tbench-$1 des perf base: $des_perf_base comprison: $des_perf_comp percent: $des_perf_drop\n" | tee -a $OUTFILE_TBENCH.result
freq_drop=`echo "scale=4;($freq_comp-$freq_base)*100/$freq_base" | bc | awk '{printf "%.4f", $0}'`
printf "Tbench-$1 freq base: $freq_base comprison: $freq_comp percent: $freq_drop\n" | tee -a $OUTFILE_TBENCH.result
load_drop=`echo "scale=4;($load_comp-$load_base)*100/$load_base" | bc | awk '{printf "%.4f", $0}'`
printf "Tbench-$1 load base: $load_base comprison: $load_comp percent: $load_drop\n" | tee -a $OUTFILE_TBENCH.result
perf_drop=`echo "scale=4;($perf_comp-$perf_base)*100/$perf_base" | bc | awk '{printf "%.4f", $0}'`
printf "Tbench-$1 perf base: $perf_base comprison: $perf_comp percent: $perf_drop\n" | tee -a $OUTFILE_TBENCH.result
energy_drop=`echo "scale=4;($energy_comp-$energy_base)*100/$energy_base" | bc | awk '{printf "%.4f", $0}'`
printf "Tbench-$1 energy base: $energy_base comprison: $energy_comp percent: $energy_drop\n" | tee -a $OUTFILE_TBENCH.result
ppw_drop=`echo "scale=4;($ppw_comp-$ppw_base)*100/$ppw_base" | bc | awk '{printf "%.4f", $0}'`
printf "Tbench-$1 performance per watt base: $ppw_base comprison: $ppw_comp percent: $ppw_drop\n" | tee -a $OUTFILE_TBENCH.result
printf "\n" | tee -a $OUTFILE_TBENCH.result
store_csv_tbench "$1-$2 VS $3-$4" "Comprison(%)" "$des_perf_drop" "$freq_drop" "$load_drop" "$perf_drop" "$energy_drop" "$ppw_drop"
fi
}
# calculate the comparison(%)
calc_comp_tbench()
{
# acpi-cpufreq-ondemand VS acpi-cpufreq-schedutil
__calc_comp_tbench ${all_scaling_names[0]} ${tbench_governors[0]} ${all_scaling_names[0]} ${tbench_governors[1]}
# amd-pstate-ondemand VS amd-pstate-schedutil
__calc_comp_tbench ${all_scaling_names[1]} ${tbench_governors[0]} ${all_scaling_names[1]} ${tbench_governors[1]}
# acpi-cpufreq-ondemand VS amd-pstate-ondemand
__calc_comp_tbench ${all_scaling_names[0]} ${tbench_governors[0]} ${all_scaling_names[1]} ${tbench_governors[0]}
# acpi-cpufreq-schedutil VS amd-pstate-schedutil
__calc_comp_tbench ${all_scaling_names[0]} ${tbench_governors[1]} ${all_scaling_names[1]} ${tbench_governors[1]}
}
# $1: file_name, $2: title, $3: ylable, $4: column
plot_png_tbench()
{
# all_scaling_names[1] all_scaling_names[0] flag
# amd-pstate acpi-cpufreq
# N N 0
# N Y 1
# Y N 2
# Y Y 3
ret=`grep -c "${all_scaling_names[1]}" $OUTFILE_TBENCH.csv`
if [ $ret -eq 0 ]; then
ret=`grep -c "${all_scaling_names[0]}" $OUTFILE_TBENCH.csv`
if [ $ret -eq 0 ]; then
flag=0
else
flag=1
fi
else
ret=`grep -c "${all_scaling_names[0]}" $OUTFILE_TBENCH.csv`
if [ $ret -eq 0 ]; then
flag=2
else
flag=3
fi
fi
gnuplot << EOF
set term png
set output "$1"
set title "$2"
set xlabel "Test Cycles (round)"
set ylabel "$3"
set grid
set style data histogram
set style fill solid 0.5 border
set boxwidth 0.8
if ($flag == 1) {
plot \
"<(sed -n -e 's/,//g' -e '/${all_scaling_names[0]}-${tbench_governors[0]}/p' $OUTFILE_TBENCH.csv)" using $4:xtic(2) title "${all_scaling_names[0]}-${tbench_governors[0]}", \
"<(sed -n -e 's/,//g' -e '/${all_scaling_names[0]}-${tbench_governors[1]}/p' $OUTFILE_TBENCH.csv)" using $4:xtic(2) title "${all_scaling_names[0]}-${tbench_governors[1]}"
} else {
if ($flag == 2) {
plot \
"<(sed -n -e 's/,//g' -e '/${all_scaling_names[1]}-${tbench_governors[0]}/p' $OUTFILE_TBENCH.csv)" using $4:xtic(2) title "${all_scaling_names[1]}-${tbench_governors[0]}", \
"<(sed -n -e 's/,//g' -e '/${all_scaling_names[1]}-${tbench_governors[1]}/p' $OUTFILE_TBENCH.csv)" using $4:xtic(2) title "${all_scaling_names[1]}-${tbench_governors[1]}"
} else {
if ($flag == 3 ) {
plot \
"<(sed -n -e 's/,//g' -e '/${all_scaling_names[0]}-${tbench_governors[0]}/p' $OUTFILE_TBENCH.csv)" using $4:xtic(2) title "${all_scaling_names[0]}-${tbench_governors[0]}", \
"<(sed -n -e 's/,//g' -e '/${all_scaling_names[0]}-${tbench_governors[1]}/p' $OUTFILE_TBENCH.csv)" using $4:xtic(2) title "${all_scaling_names[0]}-${tbench_governors[1]}", \
"<(sed -n -e 's/,//g' -e '/${all_scaling_names[1]}-${tbench_governors[0]}/p' $OUTFILE_TBENCH.csv)" using $4:xtic(2) title "${all_scaling_names[1]}-${tbench_governors[0]}", \
"<(sed -n -e 's/,//g' -e '/${all_scaling_names[1]}-${tbench_governors[1]}/p' $OUTFILE_TBENCH.csv)" using $4:xtic(2) title "${all_scaling_names[1]}-${tbench_governors[1]}"
}
}
}
quit
EOF
}
amd_pstate_tbench()
{
printf "\n---------------------------------------------\n"
printf "*** Running tbench ***"
printf "\n---------------------------------------------\n"
pre_clear_tbench
get_lines_csv_tbench "Governor"
if [ $? -eq 0 ]; then
# add titles and unit for csv file
store_csv_tbench "Governor" "Round" "Des-perf" "Freq" "Load" "Performance" "Energy" "Performance Per Watt"
store_csv_tbench "Unit" "" "" "GHz" "" "MB/s" "J" "MB/J"
fi
backup_governor
for governor in ${tbench_governors[*]} ; do
printf "\nSpecified governor is $governor\n\n"
switch_governor $governor
loop_tbench $governor
gather_tbench $governor
done
restore_governor
plot_png_tbench "tbench_perfromance.png" "Tbench Benchmark Performance" "Performance" 6
plot_png_tbench "tbench_energy.png" "Tbench Benchmark Energy" "Energy (J)" 7
plot_png_tbench "tbench_ppw.png" "Tbench Benchmark Performance Per Watt" "Performance Per Watt (MB/J)" 8
calc_comp_tbench
post_clear_tbench
}