blob: f3ec8086482d63559f3ee480ae1badc7c356d2c8 [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0
* Copyright(c) 2018 Jesper Dangaard Brouer.
*
* XDP/TC VLAN manipulation example
*
* GOTCHA: Remember to disable NIC hardware offloading of VLANs,
* else the VLAN tags are NOT inlined in the packet payload:
*
* # ethtool -K ixgbe2 rxvlan off
*
* Verify setting:
* # ethtool -k ixgbe2 | grep rx-vlan-offload
* rx-vlan-offload: off
*
*/
#include <stddef.h>
#include <stdbool.h>
#include <string.h>
#include <linux/bpf.h>
#include <linux/if_ether.h>
#include <linux/if_vlan.h>
#include <linux/in.h>
#include <linux/pkt_cls.h>
#include <bpf/bpf_helpers.h>
#include <bpf/bpf_endian.h>
/* linux/if_vlan.h have not exposed this as UAPI, thus mirror some here
*
* struct vlan_hdr - vlan header
* @h_vlan_TCI: priority and VLAN ID
* @h_vlan_encapsulated_proto: packet type ID or len
*/
struct _vlan_hdr {
__be16 h_vlan_TCI;
__be16 h_vlan_encapsulated_proto;
};
#define VLAN_PRIO_MASK 0xe000 /* Priority Code Point */
#define VLAN_PRIO_SHIFT 13
#define VLAN_CFI_MASK 0x1000 /* Canonical Format Indicator */
#define VLAN_TAG_PRESENT VLAN_CFI_MASK
#define VLAN_VID_MASK 0x0fff /* VLAN Identifier */
#define VLAN_N_VID 4096
struct parse_pkt {
__u16 l3_proto;
__u16 l3_offset;
__u16 vlan_outer;
__u16 vlan_inner;
__u8 vlan_outer_offset;
__u8 vlan_inner_offset;
};
char _license[] SEC("license") = "GPL";
static __always_inline
bool parse_eth_frame(struct ethhdr *eth, void *data_end, struct parse_pkt *pkt)
{
__u16 eth_type;
__u8 offset;
offset = sizeof(*eth);
/* Make sure packet is large enough for parsing eth + 2 VLAN headers */
if ((void *)eth + offset + (2*sizeof(struct _vlan_hdr)) > data_end)
return false;
eth_type = eth->h_proto;
/* Handle outer VLAN tag */
if (eth_type == bpf_htons(ETH_P_8021Q)
|| eth_type == bpf_htons(ETH_P_8021AD)) {
struct _vlan_hdr *vlan_hdr;
vlan_hdr = (void *)eth + offset;
pkt->vlan_outer_offset = offset;
pkt->vlan_outer = bpf_ntohs(vlan_hdr->h_vlan_TCI)
& VLAN_VID_MASK;
eth_type = vlan_hdr->h_vlan_encapsulated_proto;
offset += sizeof(*vlan_hdr);
}
/* Handle inner (double) VLAN tag */
if (eth_type == bpf_htons(ETH_P_8021Q)
|| eth_type == bpf_htons(ETH_P_8021AD)) {
struct _vlan_hdr *vlan_hdr;
vlan_hdr = (void *)eth + offset;
pkt->vlan_inner_offset = offset;
pkt->vlan_inner = bpf_ntohs(vlan_hdr->h_vlan_TCI)
& VLAN_VID_MASK;
eth_type = vlan_hdr->h_vlan_encapsulated_proto;
offset += sizeof(*vlan_hdr);
}
pkt->l3_proto = bpf_ntohs(eth_type); /* Convert to host-byte-order */
pkt->l3_offset = offset;
return true;
}
/* Hint, VLANs are chosen to hit network-byte-order issues */
#define TESTVLAN 4011 /* 0xFAB */
// #define TO_VLAN 4000 /* 0xFA0 (hint 0xOA0 = 160) */
SEC("xdp_drop_vlan_4011")
int xdp_prognum0(struct xdp_md *ctx)
{
void *data_end = (void *)(long)ctx->data_end;
void *data = (void *)(long)ctx->data;
struct parse_pkt pkt = { 0 };
if (!parse_eth_frame(data, data_end, &pkt))
return XDP_ABORTED;
/* Drop specific VLAN ID example */
if (pkt.vlan_outer == TESTVLAN)
return XDP_ABORTED;
/*
* Using XDP_ABORTED makes it possible to record this event,
* via tracepoint xdp:xdp_exception like:
* # perf record -a -e xdp:xdp_exception
* # perf script
*/
return XDP_PASS;
}
/*
Commands to setup VLAN on Linux to test packets gets dropped:
export ROOTDEV=ixgbe2
export VLANID=4011
ip link add link $ROOTDEV name $ROOTDEV.$VLANID type vlan id $VLANID
ip link set dev $ROOTDEV.$VLANID up
ip link set dev $ROOTDEV mtu 1508
ip addr add 100.64.40.11/24 dev $ROOTDEV.$VLANID
Load prog with ip tool:
ip link set $ROOTDEV xdp off
ip link set $ROOTDEV xdp object xdp_vlan01_kern.o section xdp_drop_vlan_4011
*/
/* Changing VLAN to zero, have same practical effect as removing the VLAN. */
#define TO_VLAN 0
SEC("xdp_vlan_change")
int xdp_prognum1(struct xdp_md *ctx)
{
void *data_end = (void *)(long)ctx->data_end;
void *data = (void *)(long)ctx->data;
struct parse_pkt pkt = { 0 };
if (!parse_eth_frame(data, data_end, &pkt))
return XDP_ABORTED;
/* Change specific VLAN ID */
if (pkt.vlan_outer == TESTVLAN) {
struct _vlan_hdr *vlan_hdr = data + pkt.vlan_outer_offset;
/* Modifying VLAN, preserve top 4 bits */
vlan_hdr->h_vlan_TCI =
bpf_htons((bpf_ntohs(vlan_hdr->h_vlan_TCI) & 0xf000)
| TO_VLAN);
}
return XDP_PASS;
}
/*
* Show XDP+TC can cooperate, on creating a VLAN rewriter.
* 1. Create a XDP prog that can "pop"/remove a VLAN header.
* 2. Create a TC-bpf prog that egress can add a VLAN header.
*/
#ifndef ETH_ALEN /* Ethernet MAC address length */
#define ETH_ALEN 6 /* bytes */
#endif
#define VLAN_HDR_SZ 4 /* bytes */
SEC("xdp_vlan_remove_outer")
int xdp_prognum2(struct xdp_md *ctx)
{
void *data_end = (void *)(long)ctx->data_end;
void *data = (void *)(long)ctx->data;
struct parse_pkt pkt = { 0 };
char *dest;
if (!parse_eth_frame(data, data_end, &pkt))
return XDP_ABORTED;
/* Skip packet if no outer VLAN was detected */
if (pkt.vlan_outer_offset == 0)
return XDP_PASS;
/* Moving Ethernet header, dest overlap with src, memmove handle this */
dest = data;
dest += VLAN_HDR_SZ;
/*
* Notice: Taking over vlan_hdr->h_vlan_encapsulated_proto, by
* only moving two MAC addrs (12 bytes), not overwriting last 2 bytes
*/
__builtin_memmove(dest, data, ETH_ALEN * 2);
/* Note: LLVM built-in memmove inlining require size to be constant */
/* Move start of packet header seen by Linux kernel stack */
bpf_xdp_adjust_head(ctx, VLAN_HDR_SZ);
return XDP_PASS;
}
static __always_inline
void shift_mac_4bytes_32bit(void *data)
{
__u32 *p = data;
/* Assuming VLAN hdr present. The 4 bytes in p[3] that gets
* overwritten, is ethhdr->h_proto and vlan_hdr->h_vlan_TCI.
* The vlan_hdr->h_vlan_encapsulated_proto take over role as
* ethhdr->h_proto.
*/
p[3] = p[2];
p[2] = p[1];
p[1] = p[0];
}
SEC("xdp_vlan_remove_outer2")
int xdp_prognum3(struct xdp_md *ctx)
{
void *data_end = (void *)(long)ctx->data_end;
void *data = (void *)(long)ctx->data;
struct ethhdr *orig_eth = data;
struct parse_pkt pkt = { 0 };
if (!parse_eth_frame(orig_eth, data_end, &pkt))
return XDP_ABORTED;
/* Skip packet if no outer VLAN was detected */
if (pkt.vlan_outer_offset == 0)
return XDP_PASS;
/* Simply shift down MAC addrs 4 bytes, overwrite h_proto + TCI */
shift_mac_4bytes_32bit(data);
/* Move start of packet header seen by Linux kernel stack */
bpf_xdp_adjust_head(ctx, VLAN_HDR_SZ);
return XDP_PASS;
}
/*=====================================
* BELOW: TC-hook based ebpf programs
* ====================================
* The TC-clsact eBPF programs (currently) need to be attach via TC commands
*/
SEC("tc_vlan_push")
int _tc_progA(struct __sk_buff *ctx)
{
bpf_skb_vlan_push(ctx, bpf_htons(ETH_P_8021Q), TESTVLAN);
return TC_ACT_OK;
}
/*
Commands to setup TC to use above bpf prog:
export ROOTDEV=ixgbe2
export FILE=xdp_vlan01_kern.o
# Re-attach clsact to clear/flush existing role
tc qdisc del dev $ROOTDEV clsact 2> /dev/null ;\
tc qdisc add dev $ROOTDEV clsact
# Attach BPF prog EGRESS
tc filter add dev $ROOTDEV egress \
prio 1 handle 1 bpf da obj $FILE sec tc_vlan_push
tc filter show dev $ROOTDEV egress
*/