| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2016 Freescale Semiconductor, Inc. |
| * Copyright 2017~2018 NXP |
| * |
| * Author: Dong Aisheng <aisheng.dong@nxp.com> |
| * |
| */ |
| |
| #include <linux/clk-provider.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/iopoll.h> |
| #include <linux/slab.h> |
| |
| #include "clk.h" |
| |
| /* PLL Control Status Register (xPLLCSR) */ |
| #define PLL_CSR_OFFSET 0x0 |
| #define PLL_VLD BIT(24) |
| #define PLL_EN BIT(0) |
| |
| /* PLL Configuration Register (xPLLCFG) */ |
| #define PLL_CFG_OFFSET 0x08 |
| #define BP_PLL_MULT 16 |
| #define BM_PLL_MULT (0x7f << 16) |
| |
| /* PLL Numerator Register (xPLLNUM) */ |
| #define PLL_NUM_OFFSET 0x10 |
| |
| /* PLL Denominator Register (xPLLDENOM) */ |
| #define PLL_DENOM_OFFSET 0x14 |
| |
| #define MAX_MFD 0x3fffffff |
| #define DEFAULT_MFD 1000000 |
| |
| struct clk_pllv4 { |
| struct clk_hw hw; |
| void __iomem *base; |
| }; |
| |
| /* Valid PLL MULT Table */ |
| static const int pllv4_mult_table[] = {33, 27, 22, 20, 17, 16}; |
| |
| #define to_clk_pllv4(__hw) container_of(__hw, struct clk_pllv4, hw) |
| |
| #define LOCK_TIMEOUT_US USEC_PER_MSEC |
| |
| static inline int clk_pllv4_wait_lock(struct clk_pllv4 *pll) |
| { |
| u32 csr; |
| |
| return readl_poll_timeout(pll->base + PLL_CSR_OFFSET, |
| csr, csr & PLL_VLD, 0, LOCK_TIMEOUT_US); |
| } |
| |
| static int clk_pllv4_is_enabled(struct clk_hw *hw) |
| { |
| struct clk_pllv4 *pll = to_clk_pllv4(hw); |
| |
| if (readl_relaxed(pll->base) & PLL_EN) |
| return 1; |
| |
| return 0; |
| } |
| |
| static unsigned long clk_pllv4_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct clk_pllv4 *pll = to_clk_pllv4(hw); |
| u32 mult, mfn, mfd; |
| u64 temp64; |
| |
| mult = readl_relaxed(pll->base + PLL_CFG_OFFSET); |
| mult &= BM_PLL_MULT; |
| mult >>= BP_PLL_MULT; |
| |
| mfn = readl_relaxed(pll->base + PLL_NUM_OFFSET); |
| mfd = readl_relaxed(pll->base + PLL_DENOM_OFFSET); |
| temp64 = parent_rate; |
| temp64 *= mfn; |
| do_div(temp64, mfd); |
| |
| return (parent_rate * mult) + (u32)temp64; |
| } |
| |
| static long clk_pllv4_round_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long *prate) |
| { |
| unsigned long parent_rate = *prate; |
| unsigned long round_rate, i; |
| u32 mfn, mfd = DEFAULT_MFD; |
| bool found = false; |
| u64 temp64; |
| |
| for (i = 0; i < ARRAY_SIZE(pllv4_mult_table); i++) { |
| round_rate = parent_rate * pllv4_mult_table[i]; |
| if (rate >= round_rate) { |
| found = true; |
| break; |
| } |
| } |
| |
| if (!found) { |
| pr_warn("%s: unable to round rate %lu, parent rate %lu\n", |
| clk_hw_get_name(hw), rate, parent_rate); |
| return 0; |
| } |
| |
| if (parent_rate <= MAX_MFD) |
| mfd = parent_rate; |
| |
| temp64 = (u64)(rate - round_rate); |
| temp64 *= mfd; |
| do_div(temp64, parent_rate); |
| mfn = temp64; |
| |
| /* |
| * NOTE: The value of numerator must always be configured to be |
| * less than the value of the denominator. If we can't get a proper |
| * pair of mfn/mfd, we simply return the round_rate without using |
| * the frac part. |
| */ |
| if (mfn >= mfd) |
| return round_rate; |
| |
| temp64 = (u64)parent_rate; |
| temp64 *= mfn; |
| do_div(temp64, mfd); |
| |
| return round_rate + (u32)temp64; |
| } |
| |
| static bool clk_pllv4_is_valid_mult(unsigned int mult) |
| { |
| int i; |
| |
| /* check if mult is in valid MULT table */ |
| for (i = 0; i < ARRAY_SIZE(pllv4_mult_table); i++) { |
| if (pllv4_mult_table[i] == mult) |
| return true; |
| } |
| |
| return false; |
| } |
| |
| static int clk_pllv4_set_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long parent_rate) |
| { |
| struct clk_pllv4 *pll = to_clk_pllv4(hw); |
| u32 val, mult, mfn, mfd = DEFAULT_MFD; |
| u64 temp64; |
| |
| mult = rate / parent_rate; |
| |
| if (!clk_pllv4_is_valid_mult(mult)) |
| return -EINVAL; |
| |
| if (parent_rate <= MAX_MFD) |
| mfd = parent_rate; |
| |
| temp64 = (u64)(rate - mult * parent_rate); |
| temp64 *= mfd; |
| do_div(temp64, parent_rate); |
| mfn = temp64; |
| |
| val = readl_relaxed(pll->base + PLL_CFG_OFFSET); |
| val &= ~BM_PLL_MULT; |
| val |= mult << BP_PLL_MULT; |
| writel_relaxed(val, pll->base + PLL_CFG_OFFSET); |
| |
| writel_relaxed(mfn, pll->base + PLL_NUM_OFFSET); |
| writel_relaxed(mfd, pll->base + PLL_DENOM_OFFSET); |
| |
| return 0; |
| } |
| |
| static int clk_pllv4_enable(struct clk_hw *hw) |
| { |
| u32 val; |
| struct clk_pllv4 *pll = to_clk_pllv4(hw); |
| |
| val = readl_relaxed(pll->base); |
| val |= PLL_EN; |
| writel_relaxed(val, pll->base); |
| |
| return clk_pllv4_wait_lock(pll); |
| } |
| |
| static void clk_pllv4_disable(struct clk_hw *hw) |
| { |
| u32 val; |
| struct clk_pllv4 *pll = to_clk_pllv4(hw); |
| |
| val = readl_relaxed(pll->base); |
| val &= ~PLL_EN; |
| writel_relaxed(val, pll->base); |
| } |
| |
| static const struct clk_ops clk_pllv4_ops = { |
| .recalc_rate = clk_pllv4_recalc_rate, |
| .round_rate = clk_pllv4_round_rate, |
| .set_rate = clk_pllv4_set_rate, |
| .enable = clk_pllv4_enable, |
| .disable = clk_pllv4_disable, |
| .is_enabled = clk_pllv4_is_enabled, |
| }; |
| |
| struct clk_hw *imx_clk_pllv4(const char *name, const char *parent_name, |
| void __iomem *base) |
| { |
| struct clk_pllv4 *pll; |
| struct clk_hw *hw; |
| struct clk_init_data init; |
| int ret; |
| |
| pll = kzalloc(sizeof(*pll), GFP_KERNEL); |
| if (!pll) |
| return ERR_PTR(-ENOMEM); |
| |
| pll->base = base; |
| |
| init.name = name; |
| init.ops = &clk_pllv4_ops; |
| init.parent_names = &parent_name; |
| init.num_parents = 1; |
| init.flags = CLK_SET_RATE_GATE; |
| |
| pll->hw.init = &init; |
| |
| hw = &pll->hw; |
| ret = clk_hw_register(NULL, hw); |
| if (ret) { |
| kfree(pll); |
| hw = ERR_PTR(ret); |
| } |
| |
| return hw; |
| } |