arch/arm/mach-s5pc100/setup-sdhci.c

/* linux/arch/arm/mach-s5pc100/setup-sdhci.c
 *
 * Copyright 2008 Samsung Electronics
 *
 * S5PC100 - Helper functions for settign up SDHCI device(s) (HSMMC)
 *
 * Based on mach-s3c6410/setup-sdhci.c
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
*/

#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/io.h>

#include <linux/mmc/card.h>
#include <linux/mmc/host.h>

#include <plat/regs-sdhci.h>
#include <plat/sdhci.h>

/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */

char *s5pc100_hsmmc_clksrcs[4] = {
	[0] = "hsmmc",		/* HCLK */
	/* [1] = "hsmmc",	- duplicate HCLK entry */
	[2] = "sclk_mmc",	/* mmc_bus */
	/* [3] = "48m",		- note not successfully used yet */
};


void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev,
				    void __iomem *r,
				    struct mmc_ios *ios,
				    struct mmc_card *card)
{
	u32 ctrl2, ctrl3;

	/* don't need to alter anything acording to card-type */

	writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);

	ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
	ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
		  S3C_SDHCI_CTRL2_ENFBCLKRX |
		  S3C_SDHCI_CTRL2_DFCNT_NONE |
		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);

	if (ios->clock < 25 * 1000000)
		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
			 S3C_SDHCI_CTRL3_FCSEL2 |
			 S3C_SDHCI_CTRL3_FCSEL1 |
			 S3C_SDHCI_CTRL3_FCSEL0);
	else
		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);

	writel(ctrl2, r + S3C_SDHCI_CONTROL2);
	writel(ctrl3, r + S3C_SDHCI_CONTROL3);
}