| # SPDX-License-Identifier: GPL-2.0-only |
| menuconfig ARCH_ORION5X |
| bool "Marvell Orion" |
| depends on ARCH_MULTI_V5 |
| depends on CPU_LITTLE_ENDIAN |
| select CPU_FEROCEON |
| select GPIOLIB |
| select MVEBU_MBUS |
| select FORCE_PCI |
| select PCI_QUIRKS |
| select PHYLIB if NETDEVICES |
| select PLAT_ORION_LEGACY |
| help |
| Support for the following Marvell Orion 5x series SoCs: |
| Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182), |
| Orion-2 (5281), Orion-1-90 (6183). |
| |
| if ARCH_ORION5X |
| |
| config ARCH_ORION5X_DT |
| bool "Marvell Orion5x Flattened Device Tree" |
| select ORION_CLK |
| select ORION_IRQCHIP |
| select ORION_TIMER |
| select PINCTRL |
| select PINCTRL_ORION |
| help |
| Say 'Y' here if you want your kernel to support the |
| Marvell Orion5x using flattened device tree. |
| |
| config MACH_RD88F5182_DT |
| bool "Marvell Orion-NAS Reference Design (Flattened Device Tree)" |
| select ARCH_ORION5X_DT |
| select I2C_BOARDINFO if I2C |
| help |
| Say 'Y' here if you want your kernel to support the Marvell |
| Orion-NAS (88F5182) RD2, Flattened Device Tree. |
| |
| config MACH_KUROBOX_PRO |
| bool "KuroBox Pro" |
| select I2C_BOARDINFO if I2C |
| depends on ATAGS |
| help |
| Say 'Y' here if you want your kernel to support the |
| KuroBox Pro platform. |
| |
| config MACH_DNS323 |
| bool "D-Link DNS-323" |
| select I2C_BOARDINFO if I2C |
| depends on ATAGS |
| help |
| Say 'Y' here if you want your kernel to support the |
| D-Link DNS-323 platform. |
| |
| config MACH_TS209 |
| bool "QNAP TS-109/TS-209" |
| depends on ATAGS |
| help |
| Say 'Y' here if you want your kernel to support the |
| QNAP TS-109/TS-209 platform. |
| |
| config MACH_TERASTATION_PRO2 |
| bool "Buffalo Terastation Pro II/Live" |
| depends on ATAGS |
| help |
| Say 'Y' here if you want your kernel to support the |
| Buffalo Terastation Pro II/Live platform. |
| |
| config MACH_LINKSTATION_PRO |
| bool "Buffalo Linkstation Pro/Live" |
| depends on ATAGS |
| select I2C_BOARDINFO if I2C |
| help |
| Say 'Y' here if you want your kernel to support the |
| Buffalo Linkstation Pro/Live platform. Both v1 and |
| v2 devices are supported. |
| |
| config MACH_LINKSTATION_MINI |
| bool "Buffalo Linkstation Mini (Flattened Device Tree)" |
| select ARCH_ORION5X_DT |
| help |
| Say 'Y' here if you want your kernel to support the |
| Buffalo Linkstation Mini (LS-WSGL) platform. |
| |
| config MACH_TS409 |
| bool "QNAP TS-409" |
| depends on ATAGS |
| help |
| Say 'Y' here if you want your kernel to support the |
| QNAP TS-409 platform. |
| |
| config MACH_TS78XX |
| bool "Technologic Systems TS-78xx" |
| depends on ATAGS |
| help |
| Say 'Y' here if you want your kernel to support the |
| Technologic Systems TS-78xx platform. |
| |
| config MACH_MV2120 |
| bool "HP Media Vault mv2120" |
| depends on ATAGS |
| help |
| Say 'Y' here if you want your kernel to support the |
| HP Media Vault mv2120 or mv5100. |
| |
| config MACH_D2NET_DT |
| bool "LaCie d2 Network / Big Disk Network (Flattened Device Tree)" |
| select ARCH_ORION5X_DT |
| help |
| Say 'Y' here if you want your kernel to support the |
| LaCie d2 Network NAS. |
| |
| config MACH_NET2BIG |
| bool "LaCie 2Big Network" |
| depends on ATAGS |
| select I2C_BOARDINFO if I2C |
| help |
| Say 'Y' here if you want your kernel to support the |
| LaCie 2Big Network NAS. |
| |
| config MACH_MSS2_DT |
| bool "Maxtor Shared Storage II (Flattened Device Tree)" |
| select ARCH_ORION5X_DT |
| help |
| Say 'Y' here if you want your kernel to support the |
| Maxtor Shared Storage II platform. |
| |
| endif |
