| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * arch/arm64/kvm/fpsimd.c: Guest/host FPSIMD context coordination helpers |
| * |
| * Copyright 2018 Arm Limited |
| * Author: Dave Martin <Dave.Martin@arm.com> |
| */ |
| #include <linux/irqflags.h> |
| #include <linux/sched.h> |
| #include <linux/kvm_host.h> |
| #include <asm/fpsimd.h> |
| #include <asm/kvm_asm.h> |
| #include <asm/kvm_hyp.h> |
| #include <asm/kvm_mmu.h> |
| #include <asm/sysreg.h> |
| |
| void kvm_vcpu_unshare_task_fp(struct kvm_vcpu *vcpu) |
| { |
| struct task_struct *p = vcpu->arch.parent_task; |
| struct user_fpsimd_state *fpsimd; |
| |
| if (!is_protected_kvm_enabled() || !p) |
| return; |
| |
| fpsimd = &p->thread.uw.fpsimd_state; |
| kvm_unshare_hyp(fpsimd, fpsimd + 1); |
| put_task_struct(p); |
| } |
| |
| /* |
| * Called on entry to KVM_RUN unless this vcpu previously ran at least |
| * once and the most recent prior KVM_RUN for this vcpu was called from |
| * the same task as current (highly likely). |
| * |
| * This is guaranteed to execute before kvm_arch_vcpu_load_fp(vcpu), |
| * such that on entering hyp the relevant parts of current are already |
| * mapped. |
| */ |
| int kvm_arch_vcpu_run_map_fp(struct kvm_vcpu *vcpu) |
| { |
| int ret; |
| |
| struct user_fpsimd_state *fpsimd = ¤t->thread.uw.fpsimd_state; |
| |
| kvm_vcpu_unshare_task_fp(vcpu); |
| |
| /* Make sure the host task fpsimd state is visible to hyp: */ |
| ret = kvm_share_hyp(fpsimd, fpsimd + 1); |
| if (ret) |
| return ret; |
| |
| vcpu->arch.host_fpsimd_state = kern_hyp_va(fpsimd); |
| |
| /* |
| * We need to keep current's task_struct pinned until its data has been |
| * unshared with the hypervisor to make sure it is not re-used by the |
| * kernel and donated to someone else while already shared -- see |
| * kvm_vcpu_unshare_task_fp() for the matching put_task_struct(). |
| */ |
| if (is_protected_kvm_enabled()) { |
| get_task_struct(current); |
| vcpu->arch.parent_task = current; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Prepare vcpu for saving the host's FPSIMD state and loading the guest's. |
| * The actual loading is done by the FPSIMD access trap taken to hyp. |
| * |
| * Here, we just set the correct metadata to indicate that the FPSIMD |
| * state in the cpu regs (if any) belongs to current on the host. |
| */ |
| void kvm_arch_vcpu_load_fp(struct kvm_vcpu *vcpu) |
| { |
| BUG_ON(!current->mm); |
| |
| if (!system_supports_fpsimd()) |
| return; |
| |
| fpsimd_kvm_prepare(); |
| |
| /* |
| * We will check TIF_FOREIGN_FPSTATE just before entering the |
| * guest in kvm_arch_vcpu_ctxflush_fp() and override this to |
| * FP_STATE_FREE if the flag set. |
| */ |
| vcpu->arch.fp_state = FP_STATE_HOST_OWNED; |
| |
| vcpu_clear_flag(vcpu, HOST_SVE_ENABLED); |
| if (read_sysreg(cpacr_el1) & CPACR_EL1_ZEN_EL0EN) |
| vcpu_set_flag(vcpu, HOST_SVE_ENABLED); |
| |
| if (system_supports_sme()) { |
| vcpu_clear_flag(vcpu, HOST_SME_ENABLED); |
| if (read_sysreg(cpacr_el1) & CPACR_EL1_SMEN_EL0EN) |
| vcpu_set_flag(vcpu, HOST_SME_ENABLED); |
| |
| /* |
| * If PSTATE.SM is enabled then save any pending FP |
| * state and disable PSTATE.SM. If we leave PSTATE.SM |
| * enabled and the guest does not enable SME via |
| * CPACR_EL1.SMEN then operations that should be valid |
| * may generate SME traps from EL1 to EL1 which we |
| * can't intercept and which would confuse the guest. |
| * |
| * Do the same for PSTATE.ZA in the case where there |
| * is state in the registers which has not already |
| * been saved, this is very unlikely to happen. |
| */ |
| if (read_sysreg_s(SYS_SVCR) & (SVCR_SM_MASK | SVCR_ZA_MASK)) { |
| vcpu->arch.fp_state = FP_STATE_FREE; |
| fpsimd_save_and_flush_cpu_state(); |
| } |
| } |
| } |
| |
| /* |
| * Called just before entering the guest once we are no longer preemptible |
| * and interrupts are disabled. If we have managed to run anything using |
| * FP while we were preemptible (such as off the back of an interrupt), |
| * then neither the host nor the guest own the FP hardware (and it was the |
| * responsibility of the code that used FP to save the existing state). |
| */ |
| void kvm_arch_vcpu_ctxflush_fp(struct kvm_vcpu *vcpu) |
| { |
| if (test_thread_flag(TIF_FOREIGN_FPSTATE)) |
| vcpu->arch.fp_state = FP_STATE_FREE; |
| } |
| |
| /* |
| * Called just after exiting the guest. If the guest FPSIMD state |
| * was loaded, update the host's context tracking data mark the CPU |
| * FPSIMD regs as dirty and belonging to vcpu so that they will be |
| * written back if the kernel clobbers them due to kernel-mode NEON |
| * before re-entry into the guest. |
| */ |
| void kvm_arch_vcpu_ctxsync_fp(struct kvm_vcpu *vcpu) |
| { |
| struct cpu_fp_state fp_state; |
| |
| WARN_ON_ONCE(!irqs_disabled()); |
| |
| if (vcpu->arch.fp_state == FP_STATE_GUEST_OWNED) { |
| |
| /* |
| * Currently we do not support SME guests so SVCR is |
| * always 0 and we just need a variable to point to. |
| */ |
| fp_state.st = &vcpu->arch.ctxt.fp_regs; |
| fp_state.sve_state = vcpu->arch.sve_state; |
| fp_state.sve_vl = vcpu->arch.sve_max_vl; |
| fp_state.sme_state = NULL; |
| fp_state.svcr = &vcpu->arch.svcr; |
| fp_state.fpmr = &vcpu->arch.fpmr; |
| fp_state.fp_type = &vcpu->arch.fp_type; |
| |
| if (vcpu_has_sve(vcpu)) |
| fp_state.to_save = FP_STATE_SVE; |
| else |
| fp_state.to_save = FP_STATE_FPSIMD; |
| |
| fpsimd_bind_state_to_cpu(&fp_state); |
| |
| clear_thread_flag(TIF_FOREIGN_FPSTATE); |
| } |
| } |
| |
| /* |
| * Write back the vcpu FPSIMD regs if they are dirty, and invalidate the |
| * cpu FPSIMD regs so that they can't be spuriously reused if this vcpu |
| * disappears and another task or vcpu appears that recycles the same |
| * struct fpsimd_state. |
| */ |
| void kvm_arch_vcpu_put_fp(struct kvm_vcpu *vcpu) |
| { |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| |
| /* |
| * If we have VHE then the Hyp code will reset CPACR_EL1 to |
| * the default value and we need to reenable SME. |
| */ |
| if (has_vhe() && system_supports_sme()) { |
| /* Also restore EL0 state seen on entry */ |
| if (vcpu_get_flag(vcpu, HOST_SME_ENABLED)) |
| sysreg_clear_set(CPACR_EL1, 0, |
| CPACR_EL1_SMEN_EL0EN | |
| CPACR_EL1_SMEN_EL1EN); |
| else |
| sysreg_clear_set(CPACR_EL1, |
| CPACR_EL1_SMEN_EL0EN, |
| CPACR_EL1_SMEN_EL1EN); |
| isb(); |
| } |
| |
| if (vcpu->arch.fp_state == FP_STATE_GUEST_OWNED) { |
| if (vcpu_has_sve(vcpu)) { |
| __vcpu_sys_reg(vcpu, ZCR_EL1) = read_sysreg_el1(SYS_ZCR); |
| |
| /* Restore the VL that was saved when bound to the CPU */ |
| if (!has_vhe()) |
| sve_cond_update_zcr_vq(vcpu_sve_max_vq(vcpu) - 1, |
| SYS_ZCR_EL1); |
| } |
| |
| fpsimd_save_and_flush_cpu_state(); |
| } else if (has_vhe() && system_supports_sve()) { |
| /* |
| * The FPSIMD/SVE state in the CPU has not been touched, and we |
| * have SVE (and VHE): CPACR_EL1 (alias CPTR_EL2) has been |
| * reset by kvm_reset_cptr_el2() in the Hyp code, disabling SVE |
| * for EL0. To avoid spurious traps, restore the trap state |
| * seen by kvm_arch_vcpu_load_fp(): |
| */ |
| if (vcpu_get_flag(vcpu, HOST_SVE_ENABLED)) |
| sysreg_clear_set(CPACR_EL1, 0, CPACR_EL1_ZEN_EL0EN); |
| else |
| sysreg_clear_set(CPACR_EL1, CPACR_EL1_ZEN_EL0EN, 0); |
| } |
| |
| local_irq_restore(flags); |
| } |