blob: cfdf9804e12690ddbcd4e1fd6ea266565b440137 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "brcm,bcm7435";
cpus {
#address-cells = <1>;
#size-cells = <0>;
mips-hpt-frequency = <175625000>;
cpu@0 {
compatible = "brcm,bmips5200";
device_type = "cpu";
reg = <0>;
};
cpu@1 {
compatible = "brcm,bmips5200";
device_type = "cpu";
reg = <1>;
};
cpu@2 {
compatible = "brcm,bmips5200";
device_type = "cpu";
reg = <2>;
};
cpu@3 {
compatible = "brcm,bmips5200";
device_type = "cpu";
reg = <3>;
};
};
aliases {
uart0 = &uart0;
};
cpu_intc: interrupt-controller {
#address-cells = <0>;
compatible = "mti,cpu-interrupt-controller";
interrupt-controller;
#interrupt-cells = <1>;
};
clocks {
uart_clk: uart_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <81000000>;
};
upg_clk: upg_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <27000000>;
};
};
rdb {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges = <0 0x10000000 0x01000000>;
periph_intc: interrupt-controller@41b500 {
compatible = "brcm,bcm7038-l1-intc";
reg = <0x41b500 0x40>, <0x41b600 0x40>,
<0x41b700 0x40>, <0x41b800 0x40>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&cpu_intc>;
interrupts = <2>, <3>, <2>, <3>;
};
sun_l2_intc: interrupt-controller@403000 {
compatible = "brcm,l2-intc";
reg = <0x403000 0x30>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&periph_intc>;
interrupts = <52>;
};
gisb-arb@400000 {
compatible = "brcm,bcm7435-gisb-arb";
reg = <0x400000 0xdc>;
native-endian;
interrupt-parent = <&sun_l2_intc>;
interrupts = <0>, <2>;
brcm,gisb-arb-master-mask = <0xf77f>;
brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "webcpu_0",
"pcie_0", "bsp_0",
"rdc_0", "raaga_0",
"avd_1", "jtag_0",
"svd_0", "vice_0",
"vice_1", "raaga_1",
"scpu";
};
upg_irq0_intc: interrupt-controller@406780 {
compatible = "brcm,bcm7120-l2-intc";
reg = <0x406780 0x8>;
brcm,int-map-mask = <0x44>, <0x7000000>;
brcm,int-fwd-mask = <0x70000>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&periph_intc>;
interrupts = <60>, <58>;
interrupt-names = "upg_main", "upg_bsc";
};
upg_aon_irq0_intc: interrupt-controller@409480 {
compatible = "brcm,bcm7120-l2-intc";
reg = <0x409480 0x8>;
brcm,int-map-mask = <0x40>, <0x18000000>, <0x100000>;
brcm,int-fwd-mask = <0>;
brcm,irq-can-wake;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&periph_intc>;
interrupts = <61>, <59>, <64>;
interrupt-names = "upg_main_aon", "upg_bsc_aon",
"upg_spi";
};
sun_top_ctrl: syscon@404000 {
compatible = "brcm,bcm7425-sun-top-ctrl", "syscon";
reg = <0x404000 0x51c>;
native-endian;
};
reboot {
compatible = "brcm,brcmstb-reboot";
syscon = <&sun_top_ctrl 0x304 0x308>;
};
uart0: serial@406b00 {
compatible = "ns16550a";
reg = <0x406b00 0x20>;
reg-io-width = <0x4>;
reg-shift = <0x2>;
interrupt-parent = <&periph_intc>;
interrupts = <66>;
clocks = <&uart_clk>;
status = "disabled";
};
uart1: serial@406b40 {
compatible = "ns16550a";
reg = <0x406b40 0x20>;
reg-io-width = <0x4>;
reg-shift = <0x2>;
interrupt-parent = <&periph_intc>;
interrupts = <67>;
clocks = <&uart_clk>;
status = "disabled";
};
uart2: serial@406b80 {
compatible = "ns16550a";
reg = <0x406b80 0x20>;
reg-io-width = <0x4>;
reg-shift = <0x2>;
interrupt-parent = <&periph_intc>;
interrupts = <68>;
clocks = <&uart_clk>;
status = "disabled";
};
bsca: i2c@406300 {
clock-frequency = <390000>;
compatible = "brcm,brcmstb-i2c";
interrupt-parent = <&upg_irq0_intc>;
reg = <0x406300 0x58>;
interrupts = <26>;
interrupt-names = "upg_bsca";
status = "disabled";
};
bscb: i2c@409400 {
clock-frequency = <390000>;
compatible = "brcm,brcmstb-i2c";
interrupt-parent = <&upg_aon_irq0_intc>;
reg = <0x409400 0x58>;
interrupts = <28>;
interrupt-names = "upg_bscb";
status = "disabled";
};
bscc: i2c@406200 {
clock-frequency = <390000>;
compatible = "brcm,brcmstb-i2c";
interrupt-parent = <&upg_irq0_intc>;
reg = <0x406200 0x58>;
interrupts = <24>;
interrupt-names = "upg_bscc";
status = "disabled";
};
bscd: i2c@406280 {
clock-frequency = <390000>;
compatible = "brcm,brcmstb-i2c";
interrupt-parent = <&upg_irq0_intc>;
reg = <0x406280 0x58>;
interrupts = <25>;
interrupt-names = "upg_bscd";
status = "disabled";
};
bsce: i2c@409180 {
clock-frequency = <390000>;
compatible = "brcm,brcmstb-i2c";
interrupt-parent = <&upg_aon_irq0_intc>;
reg = <0x409180 0x58>;
interrupts = <27>;
interrupt-names = "upg_bsce";
status = "disabled";
};
pwma: pwm@406580 {
compatible = "brcm,bcm7038-pwm";
reg = <0x406580 0x28>;
#pwm-cells = <2>;
clocks = <&upg_clk>;
status = "disabled";
};
pwmb: pwm@406800 {
compatible = "brcm,bcm7038-pwm";
reg = <0x406800 0x28>;
#pwm-cells = <2>;
clocks = <&upg_clk>;
status = "disabled";
};
watchdog: watchdog@4067e8 {
clocks = <&upg_clk>;
compatible = "brcm,bcm7038-wdt";
reg = <0x4067e8 0x14>;
status = "disabled";
};
aon_pm_l2_intc: interrupt-controller@408440 {
compatible = "brcm,l2-intc";
reg = <0x408440 0x30>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&periph_intc>;
interrupts = <54>;
brcm,irq-can-wake;
};
aon_ctrl: syscon@408000 {
compatible = "brcm,brcmstb-aon-ctrl";
reg = <0x408000 0x100>, <0x408200 0x200>;
reg-names = "aon-ctrl", "aon-sram";
};
timers: timer@4067c0 {
compatible = "brcm,brcmstb-timers";
reg = <0x4067c0 0x40>;
};
upg_gio: gpio@406700 {
compatible = "brcm,brcmstb-gpio";
reg = <0x406700 0x80>;
#gpio-cells = <2>;
#interrupt-cells = <2>;
gpio-controller;
interrupt-controller;
interrupt-parent = <&upg_irq0_intc>;
interrupts = <6>;
brcm,gpio-bank-widths = <32 32 32 21>;
};
upg_gio_aon: gpio@4094c0 {
compatible = "brcm,brcmstb-gpio";
reg = <0x4094c0 0x40>;
#gpio-cells = <2>;
#interrupt-cells = <2>;
gpio-controller;
interrupt-controller;
interrupt-parent = <&upg_aon_irq0_intc>;
interrupts = <6>;
interrupts-extended = <&upg_aon_irq0_intc 6>,
<&aon_pm_l2_intc 5>;
wakeup-source;
brcm,gpio-bank-widths = <18 4>;
};
enet0: ethernet@b80000 {
phy-mode = "internal";
phy-handle = <&phy1>;
mac-address = [ 00 10 18 36 23 1a ];
compatible = "brcm,genet-v3";
#address-cells = <0x1>;
#size-cells = <0x1>;
reg = <0xb80000 0x11c88>;
interrupts = <17>, <18>;
interrupt-parent = <&periph_intc>;
status = "disabled";
mdio@e14 {
compatible = "brcm,genet-mdio-v3";
#address-cells = <0x1>;
#size-cells = <0x0>;
reg = <0xe14 0x8>;
phy1: ethernet-phy@1 {
max-speed = <100>;
reg = <0x1>;
compatible = "brcm,40nm-ephy",
"ethernet-phy-ieee802.3-c22";
};
};
};
ehci0: usb@480300 {
compatible = "brcm,bcm7435-ehci", "generic-ehci";
reg = <0x480300 0x100>;
native-endian;
interrupt-parent = <&periph_intc>;
interrupts = <70>;
status = "disabled";
};
ohci0: usb@480400 {
compatible = "brcm,bcm7435-ohci", "generic-ohci";
reg = <0x480400 0x100>;
native-endian;
no-big-frame-no;
interrupt-parent = <&periph_intc>;
interrupts = <72>;
status = "disabled";
};
ehci1: usb@480500 {
compatible = "brcm,bcm7435-ehci", "generic-ehci";
reg = <0x480500 0x100>;
native-endian;
interrupt-parent = <&periph_intc>;
interrupts = <71>;
status = "disabled";
};
ohci1: usb@480600 {
compatible = "brcm,bcm7435-ohci", "generic-ohci";
reg = <0x480600 0x100>;
native-endian;
no-big-frame-no;
interrupt-parent = <&periph_intc>;
interrupts = <73>;
status = "disabled";
};
ehci2: usb@490300 {
compatible = "brcm,bcm7435-ehci", "generic-ehci";
reg = <0x490300 0x100>;
native-endian;
interrupt-parent = <&periph_intc>;
interrupts = <75>;
status = "disabled";
};
ohci2: usb@490400 {
compatible = "brcm,bcm7435-ohci", "generic-ohci";
reg = <0x490400 0x100>;
native-endian;
no-big-frame-no;
interrupt-parent = <&periph_intc>;
interrupts = <77>;
status = "disabled";
};
ehci3: usb@490500 {
compatible = "brcm,bcm7435-ehci", "generic-ehci";
reg = <0x490500 0x100>;
native-endian;
interrupt-parent = <&periph_intc>;
interrupts = <76>;
status = "disabled";
};
ohci3: usb@490600 {
compatible = "brcm,bcm7435-ohci", "generic-ohci";
reg = <0x490600 0x100>;
native-endian;
no-big-frame-no;
interrupt-parent = <&periph_intc>;
interrupts = <78>;
status = "disabled";
};
hif_l2_intc: interrupt-controller@41b000 {
compatible = "brcm,l2-intc";
reg = <0x41b000 0x30>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&periph_intc>;
interrupts = <24>;
};
nand: nand@41c800 {
compatible = "brcm,brcmnand-v6.2", "brcm,brcmnand";
#address-cells = <1>;
#size-cells = <0>;
reg-names = "nand", "flash-dma";
reg = <0x41c800 0x600>, <0x41d000 0x100>;
interrupt-parent = <&hif_l2_intc>;
interrupts = <24>, <4>;
interrupt-names = "nand_ctlrdy", "flash_dma_done";
status = "disabled";
};
sata: sata@181000 {
compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
reg-names = "ahci", "top-ctrl";
reg = <0x181000 0xa9c>, <0x180020 0x1c>;
interrupt-parent = <&periph_intc>;
interrupts = <45>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata0: sata-port@0 {
reg = <0>;
phys = <&sata_phy0>;
};
sata1: sata-port@1 {
reg = <1>;
phys = <&sata_phy1>;
};
};
sata_phy: sata-phy@180100 {
compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3";
reg = <0x180100 0x0eff>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata_phy0: sata-phy@0 {
reg = <0>;
#phy-cells = <0>;
};
sata_phy1: sata-phy@1 {
reg = <1>;
#phy-cells = <0>;
};
};
sdhci0: sdhci@41a000 {
compatible = "brcm,bcm7425-sdhci";
reg = <0x41a000 0x100>;
interrupt-parent = <&periph_intc>;
interrupts = <47>;
sd-uhs-sdr50;
mmc-hs200-1_8v;
status = "disabled";
};
sdhci1: sdhci@41a200 {
compatible = "brcm,bcm7425-sdhci";
reg = <0x41a200 0x100>;
interrupt-parent = <&periph_intc>;
interrupts = <48>;
sd-uhs-sdr50;
mmc-hs200-1_8v;
status = "disabled";
};
spi_l2_intc: interrupt-controller@41bd00 {
compatible = "brcm,l2-intc";
reg = <0x41bd00 0x30>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&periph_intc>;
interrupts = <25>;
};
qspi: spi@41d200 {
#address-cells = <0x1>;
#size-cells = <0x0>;
compatible = "brcm,spi-bcm-qspi",
"brcm,spi-brcmstb-qspi";
clocks = <&upg_clk>;
reg = <0x41a920 0x4 0x41d400 0x188 0x41d200 0x50>;
reg-names = "cs_reg", "hif_mspi", "bspi";
interrupts = <0x0 0x1 0x2 0x3 0x4 0x5 0x6>;
interrupt-parent = <&spi_l2_intc>;
interrupt-names = "spi_lr_fullness_reached",
"spi_lr_session_aborted",
"spi_lr_impatient",
"spi_lr_session_done",
"spi_lr_overread",
"mspi_done",
"mspi_halted";
status = "disabled";
};
mspi: spi@409200 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "brcm,spi-bcm-qspi",
"brcm,spi-brcmstb-mspi";
clocks = <&upg_clk>;
reg = <0x409200 0x180>;
reg-names = "mspi";
interrupts = <0x14>;
interrupt-parent = <&upg_aon_irq0_intc>;
interrupt-names = "mspi_done";
status = "disabled";
};
waketimer: waketimer@409580 {
compatible = "brcm,brcmstb-waketimer";
reg = <0x409580 0x14>;
interrupts = <0x3>;
interrupt-parent = <&aon_pm_l2_intc>;
interrupt-names = "timer";
clocks = <&upg_clk>;
status = "disabled";
};
};
memory_controllers {
compatible = "simple-bus";
ranges = <0x0 0x103b0000 0x1a000>;
#address-cells = <1>;
#size-cells = <1>;
memory-controller@0 {
compatible = "brcm,brcmstb-memc", "simple-bus";
ranges = <0x0 0x0 0xa000>;
#address-cells = <1>;
#size-cells = <1>;
memc-arb@1000 {
compatible = "brcm,brcmstb-memc-arb";
reg = <0x1000 0x248>;
};
memc-ddr@2000 {
compatible = "brcm,brcmstb-memc-ddr";
reg = <0x2000 0x300>;
};
ddr-phy@6000 {
compatible = "brcm,brcmstb-ddr-phy";
reg = <0x6000 0xc8>;
};
shimphy@8000 {
compatible = "brcm,brcmstb-ddr-shimphy";
reg = <0x8000 0x13c>;
};
};
memory-controller@1 {
compatible = "brcm,brcmstb-memc", "simple-bus";
ranges = <0x0 0x10000 0xa000>;
#address-cells = <1>;
#size-cells = <1>;
memc-arb@1000 {
compatible = "brcm,brcmstb-memc-arb";
reg = <0x1000 0x248>;
};
memc-ddr@2000 {
compatible = "brcm,brcmstb-memc-ddr";
reg = <0x2000 0x300>;
};
ddr-phy@6000 {
compatible = "brcm,brcmstb-ddr-phy";
reg = <0x6000 0xc8>;
};
shimphy@8000 {
compatible = "brcm,brcmstb-ddr-shimphy";
reg = <0x8000 0x13c>;
};
};
};
pcie_0: pcie@8b20000 {
status = "disabled";
compatible = "brcm,bcm7435-pcie";
ranges = <0x02000000 0x0 0xd0000000 0xd0000000 0x0 0x08000000
0x02000000 0x0 0xd8000000 0xd8000000 0x0 0x08000000
0x02000000 0x0 0xe0000000 0xe0000000 0x0 0x08000000
0x02000000 0x0 0xe8000000 0xe8000000 0x0 0x08000000>;
reg = <0x10410000 0x19310>;
aspm-no-l0s;
device_type = "pci";
msi-controller;
msi-parent = <&pcie_0>;
#address-cells = <0x3>;
#size-cells = <0x2>;
bus-range = <0x0 0xff>;
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
linux,pci-domain = <0x0>;
interrupt-parent = <&periph_intc>;
interrupts = <39>, <39>;
interrupt-names = "pcie", "msi";
#interrupt-cells = <0x1>;
interrupt-map = <0 0 0 1 &periph_intc 0x23
0 0 0 1 &periph_intc 0x24
0 0 0 1 &periph_intc 0x25
0 0 0 1 &periph_intc 0x26>;
};
};