blob: 867c1308de235679b18cb259eae826d51086a78f [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-or-later
/*
bttv-cards.c
this file has configuration information - card-specific stuff
like the big tvcards array for the most part
Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de)
& Marcus Metzler (mocm@thp.uni-koeln.de)
(c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/kmod.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/vmalloc.h>
#include <linux/firmware.h>
#include <net/checksum.h>
#include <asm/unaligned.h>
#include <asm/io.h>
#include "bttvp.h"
#include <media/v4l2-common.h>
#include <media/i2c/tvaudio.h>
#include "bttv-audio-hook.h"
/* fwd decl */
static void boot_msp34xx(struct bttv *btv, int pin);
static void hauppauge_eeprom(struct bttv *btv);
static void avermedia_eeprom(struct bttv *btv);
static void osprey_eeprom(struct bttv *btv, const u8 ee[256]);
static void modtec_eeprom(struct bttv *btv);
static void init_PXC200(struct bttv *btv);
static void init_RTV24(struct bttv *btv);
static void init_PCI8604PW(struct bttv *btv);
static void rv605_muxsel(struct bttv *btv, unsigned int input);
static void eagle_muxsel(struct bttv *btv, unsigned int input);
static void xguard_muxsel(struct bttv *btv, unsigned int input);
static void ivc120_muxsel(struct bttv *btv, unsigned int input);
static void gvc1100_muxsel(struct bttv *btv, unsigned int input);
static void PXC200_muxsel(struct bttv *btv, unsigned int input);
static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input);
static void picolo_tetra_init(struct bttv *btv);
static void tibetCS16_muxsel(struct bttv *btv, unsigned int input);
static void tibetCS16_init(struct bttv *btv);
static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input);
static void kodicom4400r_init(struct bttv *btv);
static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input);
static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input);
static void geovision_muxsel(struct bttv *btv, unsigned int input);
static void phytec_muxsel(struct bttv *btv, unsigned int input);
static void gv800s_muxsel(struct bttv *btv, unsigned int input);
static void gv800s_init(struct bttv *btv);
static void td3116_muxsel(struct bttv *btv, unsigned int input);
static int terratec_active_radio_upgrade(struct bttv *btv);
static int tea575x_init(struct bttv *btv);
static void identify_by_eeprom(struct bttv *btv,
unsigned char eeprom_data[256]);
static int pvr_boot(struct bttv *btv);
/* config variables */
static unsigned int triton1;
static unsigned int vsfx;
static unsigned int latency = UNSET;
static unsigned int card[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
static unsigned int pll[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
static unsigned int tuner[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
static unsigned int svhs[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
static unsigned int audiodev[BTTV_MAX];
static unsigned int saa6588[BTTV_MAX];
static struct bttv *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
static unsigned int autoload = UNSET;
static unsigned int gpiomask = UNSET;
static unsigned int audioall = UNSET;
static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
/* insmod options */
module_param(triton1, int, 0444);
module_param(vsfx, int, 0444);
module_param(latency, int, 0444);
module_param(gpiomask, int, 0444);
module_param(audioall, int, 0444);
module_param(autoload, int, 0444);
module_param_array(card, int, NULL, 0444);
module_param_array(pll, int, NULL, 0444);
module_param_array(tuner, int, NULL, 0444);
module_param_array(svhs, int, NULL, 0444);
module_param_array(remote, int, NULL, 0444);
module_param_array(audiodev, int, NULL, 0444);
module_param_array(audiomux, int, NULL, 0444);
MODULE_PARM_DESC(triton1, "set ETBF pci config bit [enable bug compatibility for triton1 + others]");
MODULE_PARM_DESC(vsfx, "set VSFX pci config bit [yet another chipset flaw workaround]");
MODULE_PARM_DESC(latency,"pci latency timer");
MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
MODULE_PARM_DESC(pll, "specify installed crystal (0=none, 28=28 MHz, 35=35 MHz, 14=14 MHz)");
MODULE_PARM_DESC(tuner,"specify installed tuner type");
MODULE_PARM_DESC(autoload, "obsolete option, please do not use anymore");
MODULE_PARM_DESC(audiodev, "specify audio device:\n"
"\t\t-1 = no audio\n"
"\t\t 0 = autodetect (default)\n"
"\t\t 1 = msp3400\n"
"\t\t 2 = tda7432\n"
"\t\t 3 = tvaudio");
MODULE_PARM_DESC(saa6588, "if 1, then load the saa6588 RDS module, default (0) is to use the card definition.");
MODULE_FIRMWARE("hcwamc.rbf");
/* I2C addresses list */
#define I2C_ADDR_TDA7432 0x8a
#define I2C_ADDR_MSP3400 0x80
#define I2C_ADDR_MSP3400_ALT 0x88
/* ----------------------------------------------------------------------- */
/* list of card IDs for bt878+ cards */
static struct CARD {
unsigned id;
int cardnr;
char *name;
} cards[] = {
{ 0x13eb0070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV" },
{ 0x39000070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV-D" },
{ 0x45000070, BTTV_BOARD_HAUPPAUGEPVR, "Hauppauge WinTV/PVR" },
{ 0xff000070, BTTV_BOARD_OSPREY1x0, "Osprey-100" },
{ 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" },
{ 0xff020070, BTTV_BOARD_OSPREY500, "Osprey-500" },
{ 0xff030070, BTTV_BOARD_OSPREY2000, "Osprey-2000" },
{ 0xff040070, BTTV_BOARD_OSPREY540, "Osprey-540" },
{ 0xff070070, BTTV_BOARD_OSPREY440, "Osprey-440" },
{ 0x00011002, BTTV_BOARD_ATI_TVWONDER, "ATI TV Wonder" },
{ 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
{ 0x6606107d, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
{ 0x6607107d, BTTV_BOARD_WINFASTVC100, "Leadtek WinFast VC 100" },
{ 0x6609107d, BTTV_BOARD_WINFAST2000, "Leadtek TV 2000 XP" },
{ 0x263610b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
{ 0x264510b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
{ 0x402010fc, BTTV_BOARD_GVBCTV3PCI, "I-O Data Co. GV-BCTV3/PCI" },
{ 0x405010fc, BTTV_BOARD_GVBCTV4PCI, "I-O Data Co. GV-BCTV4/PCI" },
{ 0x407010fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
{ 0xd01810fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
{ 0x001211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" },
/* some cards ship with byteswapped IDs ... */
{ 0x1200bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" },
{ 0xff00bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" },
/* this seems to happen as well ... */
{ 0xff1211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" },
{ 0x3000121a, BTTV_BOARD_VOODOOTV_200, "3Dfx VoodooTV 200" },
{ 0x263710b4, BTTV_BOARD_VOODOOTV_FM, "3Dfx VoodooTV FM" },
{ 0x3060121a, BTTV_BOARD_STB2, "3Dfx VoodooTV 100/ STB OEM" },
{ 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
{ 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" },
{ 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
{ 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
{ 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" },
{ 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" },
{ 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS, "Phoebe TV Master (CPH060)" },
{ 0x00011461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" },
{ 0x00021461, BTTV_BOARD_AVERMEDIA98, "AVermedia TVCapture 98" },
{ 0x00031461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" },
{ 0x00041461, BTTV_BOARD_AVERMEDIA98, "AVerMedia TVCapture 98" },
{ 0x03001461, BTTV_BOARD_AVERMEDIA98, "VDOMATE TV TUNER CARD" },
{ 0x1117153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL B/G)" },
{ 0x1118153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL B/G)" },
{ 0x1119153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL I)" },
{ 0x111a153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL I)" },
{ 0x1123153b, BTTV_BOARD_TERRATVRADIO, "Terratec TV Radio+" },
{ 0x1127153b, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.05)" },
/* clashes with FlyVideo
*{ 0x18521852, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.10)" }, */
{ 0x1134153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (LR102)" },
{ 0x1135153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* LR102 */
{ 0x5018153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue" }, /* ?? */
{ 0xff3b153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* ?? */
{ 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
{ 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
{ 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
{ 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
{ 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
{ 0x1430aa00, BTTV_BOARD_PV143, "Provideo PV143A" },
{ 0x1431aa00, BTTV_BOARD_PV143, "Provideo PV143B" },
{ 0x1432aa00, BTTV_BOARD_PV143, "Provideo PV143C" },
{ 0x1433aa00, BTTV_BOARD_PV143, "Provideo PV143D" },
{ 0x1433aa03, BTTV_BOARD_PV143, "Security Eyes" },
{ 0x1460aa00, BTTV_BOARD_PV150, "Provideo PV150A-1" },
{ 0x1461aa01, BTTV_BOARD_PV150, "Provideo PV150A-2" },
{ 0x1462aa02, BTTV_BOARD_PV150, "Provideo PV150A-3" },
{ 0x1463aa03, BTTV_BOARD_PV150, "Provideo PV150A-4" },
{ 0x1464aa04, BTTV_BOARD_PV150, "Provideo PV150B-1" },
{ 0x1465aa05, BTTV_BOARD_PV150, "Provideo PV150B-2" },
{ 0x1466aa06, BTTV_BOARD_PV150, "Provideo PV150B-3" },
{ 0x1467aa07, BTTV_BOARD_PV150, "Provideo PV150B-4" },
{ 0xa132ff00, BTTV_BOARD_IVC100, "IVC-100" },
{ 0xa1550000, BTTV_BOARD_IVC200, "IVC-200" },
{ 0xa1550001, BTTV_BOARD_IVC200, "IVC-200" },
{ 0xa1550002, BTTV_BOARD_IVC200, "IVC-200" },
{ 0xa1550003, BTTV_BOARD_IVC200, "IVC-200" },
{ 0xa1550100, BTTV_BOARD_IVC200, "IVC-200G" },
{ 0xa1550101, BTTV_BOARD_IVC200, "IVC-200G" },
{ 0xa1550102, BTTV_BOARD_IVC200, "IVC-200G" },
{ 0xa1550103, BTTV_BOARD_IVC200, "IVC-200G" },
{ 0xa1550800, BTTV_BOARD_IVC200, "IVC-200" },
{ 0xa1550801, BTTV_BOARD_IVC200, "IVC-200" },
{ 0xa1550802, BTTV_BOARD_IVC200, "IVC-200" },
{ 0xa1550803, BTTV_BOARD_IVC200, "IVC-200" },
{ 0xa182ff00, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0xa182ff01, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0xa182ff02, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0xa182ff03, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0xa182ff04, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0xa182ff05, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0xa182ff06, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0xa182ff07, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0xa182ff08, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0xa182ff09, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0xa182ff0a, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0xa182ff0b, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0xa182ff0c, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0xa182ff0d, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0xa182ff0e, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0xa182ff0f, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0xf0500000, BTTV_BOARD_IVCE8784, "IVCE-8784" },
{ 0xf0500001, BTTV_BOARD_IVCE8784, "IVCE-8784" },
{ 0xf0500002, BTTV_BOARD_IVCE8784, "IVCE-8784" },
{ 0xf0500003, BTTV_BOARD_IVCE8784, "IVCE-8784" },
{ 0x41424344, BTTV_BOARD_GRANDTEC, "GrandTec Multi Capture" },
{ 0x01020304, BTTV_BOARD_XGUARD, "Grandtec Grand X-Guard" },
{ 0x18501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
{ 0xa0501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
{ 0x18511851, BTTV_BOARD_FLYVIDEO98EZ, "FlyVideo 98EZ (LR51)/ CyberMail AV" },
{ 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
{ 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" },
{ 0x18501f7f, BTTV_BOARD_FLYVIDEO_98, "Lifeview Flyvideo 98" },
{ 0x010115cb, BTTV_BOARD_GMV1, "AG GMV1" },
{ 0x010114c7, BTTV_BOARD_MODTEC_205, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
{ 0x10b42636, BTTV_BOARD_HAUPPAUGE878, "STB ???" },
{ 0x217d6606, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
{ 0xfff6f6ff, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
{ 0x03116000, BTTV_BOARD_SENSORAY311_611, "Sensoray 311" },
{ 0x06116000, BTTV_BOARD_SENSORAY311_611, "Sensoray 611" },
{ 0x00790e11, BTTV_BOARD_WINDVR, "Canopus WinDVR PCI" },
{ 0xa0fca1a0, BTTV_BOARD_ZOLTRIX, "Face to Face Tvmax" },
{ 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" },
{ 0x146caa0c, BTTV_BOARD_PV951, "ituner spectra8" },
{ 0x200a1295, BTTV_BOARD_PXC200, "ImageNation PXC200A" },
{ 0x40111554, BTTV_BOARD_PV_BT878P_9B, "Prolink Pixelview PV-BT" },
{ 0x17de0a01, BTTV_BOARD_KWORLD, "Mecer TV/FM/Video Tuner" },
{ 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" },
{ 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" },
{ 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" },
{ 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" },
{ 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" },
{ 0x53534149, BTTV_BOARD_SSAI_SECURITY, "SSAI Security Video Interface" },
{ 0x5353414a, BTTV_BOARD_SSAI_ULTRASOUND, "SSAI Ultrasound Video Interface" },
/* likely broken, vendor id doesn't match the other magic views ...
* { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */
/* Duplicate PCI ID, reconfigure for this board during the eeprom read.
* { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB, "Hauppauge ImpactVCB" }, */
{ 0x109e036e, BTTV_BOARD_CONCEPTRONIC_CTVFMI2, "Conceptronic CTVFMi v2"},
/* DVB cards (using pci function .1 for mpeg data xfer) */
{ 0x001c11bd, BTTV_BOARD_PINNACLESAT, "Pinnacle PCTV Sat" },
{ 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
{ 0x20007063, BTTV_BOARD_PC_HDTV, "pcHDTV HD-2000 TV"},
{ 0x002611bd, BTTV_BOARD_TWINHAN_DST, "Pinnacle PCTV SAT CI" },
{ 0x00011822, BTTV_BOARD_TWINHAN_DST, "Twinhan VisionPlus DVB" },
{ 0xfc00270f, BTTV_BOARD_TWINHAN_DST, "ChainTech digitop DST-1000 DVB-S" },
{ 0x07711461, BTTV_BOARD_AVDVBT_771, "AVermedia AverTV DVB-T 771" },
{ 0x07611461, BTTV_BOARD_AVDVBT_761, "AverMedia AverTV DVB-T 761" },
{ 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE, "DViCO FusionHDTV DVB-T Lite" },
{ 0xdb1118ac, BTTV_BOARD_DVICO_DVBT_LITE, "Ultraview DVB-T Lite" },
{ 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE, "DViCO FusionHDTV 5 Lite" },
{ 0x00261822, BTTV_BOARD_TWINHAN_DST, "DNTV Live! Mini "},
{ 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2, "DViCO FusionHDTV 2" },
{ 0x763c008a, BTTV_BOARD_GEOVISION_GV600, "GeoVision GV-600" },
{ 0x18011000, BTTV_BOARD_ENLTV_FM_2, "Encore ENL TV-FM-2" },
{ 0x763d800a, BTTV_BOARD_GEOVISION_GV800S, "GeoVision GV-800(S) (master)" },
{ 0x763d800b, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" },
{ 0x763d800c, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" },
{ 0x763d800d, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" },
{ 0x15401830, BTTV_BOARD_PV183, "Provideo PV183-1" },
{ 0x15401831, BTTV_BOARD_PV183, "Provideo PV183-2" },
{ 0x15401832, BTTV_BOARD_PV183, "Provideo PV183-3" },
{ 0x15401833, BTTV_BOARD_PV183, "Provideo PV183-4" },
{ 0x15401834, BTTV_BOARD_PV183, "Provideo PV183-5" },
{ 0x15401835, BTTV_BOARD_PV183, "Provideo PV183-6" },
{ 0x15401836, BTTV_BOARD_PV183, "Provideo PV183-7" },
{ 0x15401837, BTTV_BOARD_PV183, "Provideo PV183-8" },
{ 0x3116f200, BTTV_BOARD_TVT_TD3116, "Tongwei Video Technology TD-3116" },
{ 0x02280279, BTTV_BOARD_APOSONIC_WDVR, "Aposonic W-DVR" },
{ 0, -1, NULL }
};
/* ----------------------------------------------------------------------- */
/* array with description for bt848 / bt878 tv/grabber cards */
struct tvcard bttv_tvcards[] = {
/* ---- card 0x00 ---------------------------------- */
[BTTV_BOARD_UNKNOWN] = {
.name = " *** UNKNOWN/GENERIC *** ",
.video_inputs = 4,
.svhs = 2,
.muxsel = MUXSEL(2, 3, 1, 0),
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_MIRO] = {
.name = "MIRO PCTV",
.video_inputs = 4,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 15,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 2, 0, 0, 0 },
.gpiomute = 10,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_HAUPPAUGE] = {
.name = "Hauppauge (bt848)",
.video_inputs = 4,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 7,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 1, 2, 3 },
.gpiomute = 4,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_STB] = {
.name = "STB, Gateway P/N 6000699 (bt848)",
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 7,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 4, 0, 2, 3 },
.gpiomute = 1,
.no_msp34xx = 1,
.tuner_type = TUNER_PHILIPS_NTSC,
.tuner_addr = ADDR_UNSET,
.pll = PLL_28,
.has_radio = 1,
},
/* ---- card 0x04 ---------------------------------- */
[BTTV_BOARD_INTEL] = {
.name = "Intel Create and Share PCI/ Smart Video Recorder III",
.video_inputs = 4,
/* .audio_inputs= 0, */
.svhs = 2,
.gpiomask = 0,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0 },
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_DIAMOND] = {
.name = "Diamond DTV2000",
.video_inputs = 4,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 3,
.muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = { 0, 1, 0, 1 },
.gpiomute = 3,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_AVERMEDIA] = {
.name = "AVerMedia TVPhone",
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = 3,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomask = 0x0f,
.gpiomux = { 0x0c, 0x04, 0x08, 0x04 },
/* 0x04 for some cards ?? */
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.audio_mode_gpio= avermedia_tvphone_audio,
.has_remote = 1,
},
[BTTV_BOARD_MATRIX_VISION] = {
.name = "MATRIX-Vision MV-Delta",
.video_inputs = 5,
/* .audio_inputs= 1, */
.svhs = 3,
.gpiomask = 0,
.muxsel = MUXSEL(2, 3, 1, 0, 0),
.gpiomux = { 0 },
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
/* ---- card 0x08 ---------------------------------- */
[BTTV_BOARD_FLYVIDEO] = {
.name = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
.video_inputs = 4,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0xc00,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0xc00, 0x800, 0x400 },
.gpiomute = 0xc00,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_TURBOTV] = {
.name = "IMS/IXmicro TurboTV",
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 3,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 1, 1, 2, 3 },
.pll = PLL_28,
.tuner_type = TUNER_TEMIC_PAL,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_HAUPPAUGE878] = {
.name = "Hauppauge (bt878)",
.video_inputs = 4,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x0f, /* old: 7 */
.muxsel = MUXSEL(2, 0, 1, 1),
.gpiomux = { 0, 1, 2, 3 },
.gpiomute = 4,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_MIROPRO] = {
.name = "MIRO PCTV pro",
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x3014f,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x20001,0x10001, 0, 0 },
.gpiomute = 10,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
/* ---- card 0x0c ---------------------------------- */
[BTTV_BOARD_ADSTECH_TV] = {
.name = "ADS Technologies Channel Surfer TV (bt848)",
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 15,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 13, 14, 11, 7 },
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_AVERMEDIA98] = {
.name = "AVerMedia TVCapture 98",
.video_inputs = 3,
/* .audio_inputs= 4, */
.svhs = 2,
.gpiomask = 15,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 13, 14, 11, 7 },
.msp34xx_alt = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.audio_mode_gpio= avermedia_tv_stereo_audio,
.no_gpioirq = 1,
},
[BTTV_BOARD_VHX] = {
.name = "Aimslab Video Highway Xtreme (VHX)",
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 7,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */
.gpiomute = 4,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_ZOLTRIX] = {
.name = "Zoltrix TV-Max",
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 15,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0, 1, 0 },
.gpiomute = 10,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
/* ---- card 0x10 ---------------------------------- */
[BTTV_BOARD_PIXVIEWPLAYTV] = {
.name = "Prolink Pixelview PlayTV (bt878)",
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x01fe00,
.muxsel = MUXSEL(2, 3, 1, 1),
/* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
.gpiomux = { 0x001e00, 0, 0x018000, 0x014000 },
.gpiomute = 0x002000,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_WINVIEW_601] = {
.name = "Leadtek WinView 601",
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x8300f8,
.muxsel = MUXSEL(2, 3, 1, 1, 0),
.gpiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 },
.gpiomute = 0xcfa007,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.volume_gpio = winview_volume,
.has_radio = 1,
},
[BTTV_BOARD_AVEC_INTERCAP] = {
.name = "AVEC Intercapture",
.video_inputs = 3,
/* .audio_inputs= 2, */
.svhs = 2,
.gpiomask = 0,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 1, 0, 0, 0 },
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_LIFE_FLYKIT] = {
.name = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
.video_inputs = 4,
/* .audio_inputs= 1, */
.svhs = NO_SVHS,
.gpiomask = 0x8dff00,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0 },
.no_msp34xx = 1,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
/* ---- card 0x14 ---------------------------------- */
[BTTV_BOARD_CEI_RAFFLES] = {
.name = "CEI Raffles Card",
.video_inputs = 3,
/* .audio_inputs= 3, */
.svhs = 2,
.muxsel = MUXSEL(2, 3, 1, 1),
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_CONFERENCETV] = {
.name = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
.video_inputs = 4,
/* .audio_inputs= 2, tuner, line in */
.svhs = 2,
.gpiomask = 0x1800,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0x800, 0x1000, 0x1000 },
.gpiomute = 0x1800,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL_I,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_PHOEBE_TVMAS] = {
.name = "Askey CPH050/ Phoebe Tv Master + FM",
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0xc00,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 1, 0x800, 0x400 },
.gpiomute = 0xc00,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_MODTEC_205] = {
.name = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = NO_SVHS,
.has_dig_in = 1,
.gpiomask = 7,
.muxsel = MUXSEL(2, 3, 0), /* input 2 is digital */
/* .digital_mode= DIGITAL_MODE_CAMERA, */
.gpiomux = { 0, 0, 0, 0 },
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_ALPS_TSBB5_PAL_I,
.tuner_addr = ADDR_UNSET,
},
/* ---- card 0x18 ---------------------------------- */
[BTTV_BOARD_MAGICTVIEW061] = {
.name = "Askey CPH05X/06X (bt878) [many vendors]",
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0xe00,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = {0x400, 0x400, 0x400, 0x400 },
.gpiomute = 0xc00,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.has_remote = 1,
.has_radio = 1, /* not every card has radio */
},
[BTTV_BOARD_VOBIS_BOOSTAR] = {
.name = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x1f0fff,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x20000, 0x30000, 0x10000, 0 },
.gpiomute = 0x40000,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.audio_mode_gpio= terratv_audio,
},
[BTTV_BOARD_HAUPPAUG_WCAM] = {
.name = "Hauppauge WinCam newer (bt878)",
.video_inputs = 4,
/* .audio_inputs= 1, */
.svhs = 3,
.gpiomask = 7,
.muxsel = MUXSEL(2, 0, 1, 1),
.gpiomux = { 0, 1, 2, 3 },
.gpiomute = 4,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_MAXI] = {
.name = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
.video_inputs = 4,
/* .audio_inputs= 2, */
.svhs = 2,
.gpiomask = 0x1800,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0x800, 0x1000, 0x1000 },
.gpiomute = 0x1800,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_SECAM,
.tuner_addr = ADDR_UNSET,
},
/* ---- card 0x1c ---------------------------------- */
[BTTV_BOARD_TERRATV] = {
.name = "Terratec TerraTV+ Version 1.1 (bt878)",
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x1f0fff,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x20000, 0x30000, 0x10000, 0x00000 },
.gpiomute = 0x40000,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.audio_mode_gpio= terratv_audio,
/* GPIO wiring:
External 20 pin connector (for Active Radio Upgrade board)
gpio00: i2c-sda
gpio01: i2c-scl
gpio02: om5610-data
gpio03: om5610-clk
gpio04: om5610-wre
gpio05: om5610-stereo
gpio06: rds6588-davn
gpio07: Pin 7 n.c.
gpio08: nIOW
gpio09+10: nIOR, nSEL ?? (bt878)
gpio09: nIOR (bt848)
gpio10: nSEL (bt848)
Sound Routing:
gpio16: u2-A0 (1st 4052bt)
gpio17: u2-A1
gpio18: u2-nEN
gpio19: u4-A0 (2nd 4052)
gpio20: u4-A1
u4-nEN - GND
Btspy:
00000 : Cdrom (internal audio input)
10000 : ext. Video audio input
20000 : TV Mono
a0000 : TV Mono/2
1a0000 : TV Stereo
30000 : Radio
40000 : Mute
*/
},
[BTTV_BOARD_PXC200] = {
/* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
.name = "Imagenation PXC200",
.video_inputs = 5,
/* .audio_inputs= 1, */
.svhs = 1, /* was: 4 */
.gpiomask = 0,
.muxsel = MUXSEL(2, 3, 1, 0, 0),
.gpiomux = { 0 },
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.muxsel_hook = PXC200_muxsel,
},
[BTTV_BOARD_FLYVIDEO_98] = {
.name = "Lifeview FlyVideo 98 LR50",
.video_inputs = 4,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x1800, /* 0x8dfe00 */
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0x0800, 0x1000, 0x1000 },
.gpiomute = 0x1800,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_IPROTV] = {
.name = "Formac iProTV, Formac ProTV I (bt848)",
.video_inputs = 4,
/* .audio_inputs= 1, */
.svhs = 3,
.gpiomask = 1,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 1, 0, 0, 0 },
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
},
/* ---- card 0x20 ---------------------------------- */
[BTTV_BOARD_INTEL_C_S_PCI] = {
.name = "Intel Create and Share PCI/ Smart Video Recorder III",
.video_inputs = 4,
/* .audio_inputs= 0, */
.svhs = 2,
.gpiomask = 0,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0 },
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_TERRATVALUE] = {
.name = "Terratec TerraTValue Version Bt878",
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0xffff00,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x500, 0, 0x300, 0x900 },
.gpiomute = 0x900,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_WINFAST2000] = {
.name = "Leadtek WinFast 2000/ WinFast 2000 XP",
.video_inputs = 4,
/* .audio_inputs= 1, */
.svhs = 2,
/* TV, CVid, SVid, CVid over SVid connector */
.muxsel = MUXSEL(2, 3, 1, 1, 0),
/* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
.gpiomask = 0xb33000,
.gpiomux = { 0x122000,0x1000,0x0000,0x620000 },
.gpiomute = 0x800000,
/* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
gpio23 -- hef4052:nEnable (0x800000)
gpio12 -- hef4052:A1
gpio13 -- hef4052:A0
0x0000: external audio
0x1000: FM
0x2000: TV
0x3000: n.c.
Note: There exists another variant "Winfast 2000" with tv stereo !?
Note: eeprom only contains FF and pci subsystem id 107d:6606
*/
.pll = PLL_28,
.has_radio = 1,
.tuner_type = TUNER_PHILIPS_PAL, /* default for now, gpio reads BFFF06 for Pal bg+dk */
.tuner_addr = ADDR_UNSET,
.audio_mode_gpio= winfast2000_audio,
.has_remote = 1,
},
[BTTV_BOARD_CHRONOS_VS2] = {
.name = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
.video_inputs = 4,
/* .audio_inputs= 3, */
.svhs = 2,
.gpiomask = 0x1800,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0x800, 0x1000, 0x1000 },
.gpiomute = 0x1800,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
/* ---- card 0x24 ---------------------------------- */
[BTTV_BOARD_TYPHOON_TVIEW] = {
.name = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
.video_inputs = 4,
/* .audio_inputs= 3, */
.svhs = 2,
.gpiomask = 0x1800,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0x800, 0x1000, 0x1000 },
.gpiomute = 0x1800,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.has_radio = 1,
},
[BTTV_BOARD_PXELVWPLTVPRO] = {
.name = "Prolink PixelView PlayTV pro",
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0xff,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x21, 0x20, 0x24, 0x2c },
.gpiomute = 0x29,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_MAGICTVIEW063] = {
.name = "Askey CPH06X TView99",
.video_inputs = 4,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x551e00,
.muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = { 0x551400, 0x551200, 0, 0 },
.gpiomute = 0x551c00,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL_I,
.tuner_addr = ADDR_UNSET,
.has_remote = 1,
},
[BTTV_BOARD_PINNACLE] = {
.name = "Pinnacle PCTV Studio/Rave",
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x03000F,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 2, 0xd0001, 0, 0 },
.gpiomute = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
/* ---- card 0x28 ---------------------------------- */
[BTTV_BOARD_STB2] = {
.name = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 7,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 4, 0, 2, 3 },
.gpiomute = 1,
.no_msp34xx = 1,
.tuner_type = TUNER_PHILIPS_NTSC,
.tuner_addr = ADDR_UNSET,
.pll = PLL_28,
.has_radio = 1,
},
[BTTV_BOARD_AVPHONE98] = {
.name = "AVerMedia TVPhone 98",
.video_inputs = 3,
/* .audio_inputs= 4, */
.svhs = 2,
.gpiomask = 15,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 13, 4, 11, 7 },
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.has_radio = 1,
.audio_mode_gpio= avermedia_tvphone_audio,
},
[BTTV_BOARD_PV951] = {
.name = "ProVideo PV951", /* pic16c54 */
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0, 0, 0},
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL_I,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_ONAIR_TV] = {
.name = "Little OnAir TV",
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0xe00b,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 },
.gpiomute = 0xff3ffc,
.no_msp34xx = 1,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
/* ---- card 0x2c ---------------------------------- */
[BTTV_BOARD_SIGMA_TVII_FM] = {
.name = "Sigma TVII-FM",
.video_inputs = 2,
/* .audio_inputs= 1, */
.svhs = NO_SVHS,
.gpiomask = 3,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 1, 1, 0, 2 },
.gpiomute = 3,
.no_msp34xx = 1,
.pll = PLL_NONE,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_MATRIX_VISION2] = {
.name = "MATRIX-Vision MV-Delta 2",
.video_inputs = 5,
/* .audio_inputs= 1, */
.svhs = 3,
.gpiomask = 0,
.muxsel = MUXSEL(2, 3, 1, 0, 0),
.gpiomux = { 0 },
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_ZOLTRIX_GENIE] = {
.name = "Zoltrix Genie TV/FM",
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0xbcf03f,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0xbc803f, 0xbc903f, 0xbcb03f, 0 },
.gpiomute = 0xbcb03f,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_TEMIC_4039FR5_NTSC,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_TERRATVRADIO] = {
.name = "Terratec TV/Radio+",
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x70000,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x20000, 0x30000, 0x10000, 0 },
.gpiomute = 0x40000,
.no_msp34xx = 1,
.pll = PLL_35,
.tuner_type = TUNER_PHILIPS_PAL_I,
.tuner_addr = ADDR_UNSET,
.has_radio = 1,
},
/* ---- card 0x30 ---------------------------------- */
[BTTV_BOARD_DYNALINK] = {
.name = "Askey CPH03x/ Dynalink Magic TView",
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 15,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = {2,0,0,0 },
.gpiomute = 1,
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_GVBCTV3PCI] = {
.name = "IODATA GV-BCTV3/PCI",
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x010f00,
.muxsel = MUXSEL(2, 3, 0, 0),
.gpiomux = {0x10000, 0, 0x10000, 0 },
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_ALPS_TSHC6_NTSC,
.tuner_addr = ADDR_UNSET,
.audio_mode_gpio= gvbctv3pci_audio,
},
[BTTV_BOARD_PXELVWPLTVPAK] = {
.name = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
.video_inputs = 5,
/* .audio_inputs= 1, */
.svhs = 3,
.has_dig_in = 1,
.gpiomask = 0xAA0000,
.muxsel = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
/* .digital_mode= DIGITAL_MODE_CAMERA, */
.gpiomux = { 0x20000, 0, 0x80000, 0x80000 },
.gpiomute = 0xa8000,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL_I,
.tuner_addr = ADDR_UNSET,
.has_remote = 1,
/* GPIO wiring: (different from Rev.4C !)
GPIO17: U4.A0 (first hef4052bt)
GPIO19: U4.A1
GPIO20: U5.A1 (second hef4052bt)
GPIO21: U4.nEN
GPIO22: BT832 Reset Line
GPIO23: A5,A0, U5,nEN
Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
*/
},
[BTTV_BOARD_EAGLE] = {
.name = "Eagle Wireless Capricorn2 (bt878A)",
.video_inputs = 4,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 7,
.muxsel = MUXSEL(2, 0, 1, 1),
.gpiomux = { 0, 1, 2, 3 },
.gpiomute = 4,
.pll = PLL_28,
.tuner_type = UNSET /* TUNER_ALPS_TMDH2_NTSC */,
.tuner_addr = ADDR_UNSET,
},
/* ---- card 0x34 ---------------------------------- */
[BTTV_BOARD_PINNACLEPRO] = {
/* David Härdeman <david@2gen.com> */
.name = "Pinnacle PCTV Studio Pro",
.video_inputs = 4,
/* .audio_inputs= 1, */
.svhs = 3,
.gpiomask = 0x03000F,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 1, 0xd0001, 0, 0 },
.gpiomute = 10,
/* sound path (5 sources):
MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
0= ext. Audio IN
1= from MUX2
2= Mono TV sound from Tuner
3= not connected
MUX2 (mask 0x30000):
0,2,3= from MSP34xx
1= FM stereo Radio from Tuner */
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_TVIEW_RDS_FM] = {
/* Claas Langbehn <claas@bigfoot.com>,
Sven Grothklags <sven@upb.de> */
.name = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
.video_inputs = 4,
/* .audio_inputs= 3, */
.svhs = 2,
.gpiomask = 0x1c,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0, 0x10, 8 },
.gpiomute = 4,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.has_radio = 1,
},
[BTTV_BOARD_LIFETEC_9415] = {
/* Tim Röstermundt <rosterm@uni-muenster.de>
in de.comp.os.unix.linux.hardware:
options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
options tuner type=5 */
.name = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
.video_inputs = 4,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x18e0,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x0000,0x0800,0x1000,0x1000 },
.gpiomute = 0x18e0,
/* For cards with tda9820/tda9821:
0x0000: Tuner normal stereo
0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
0x0880: Tuner A2 stereo */
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_BESTBUY_EASYTV] = {
/* Miguel Angel Alvarez <maacruz@navegalia.com>
old Easy TV BT848 version (model CPH031) */
.name = "Askey CPH031/ BESTBUY Easy TV",
.video_inputs = 4,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0xF,
.muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = { 2, 0, 0, 0 },
.gpiomute = 10,
.pll = PLL_28,
.tuner_type = TUNER_TEMIC_PAL,
.tuner_addr = ADDR_UNSET,
},
/* ---- card 0x38 ---------------------------------- */
[BTTV_BOARD_FLYVIDEO_98FM] = {
/* Gordon Heydon <gjheydon@bigfoot.com ('98) */
.name = "Lifeview FlyVideo 98FM LR50",
.video_inputs = 4,
/* .audio_inputs= 3, */
.svhs = 2,
.gpiomask = 0x1800,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0x800, 0x1000, 0x1000 },
.gpiomute = 0x1800,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
},
/* This is the ultimate cheapo capture card
* just a BT848A on a small PCB!
* Steve Hosgood <steve@equiinet.com> */
[BTTV_BOARD_GRANDTEC] = {
.name = "GrandTec 'Grand Video Capture' (Bt848)",
.video_inputs = 2,
/* .audio_inputs= 0, */
.svhs = 1,
.gpiomask = 0,
.muxsel = MUXSEL(3, 1),
.gpiomux = { 0 },
.no_msp34xx = 1,
.pll = PLL_35,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_ASKEY_CPH060] = {
/* Daniel Herrington <daniel.herrington@home.com> */
.name = "Askey CPH060/ Phoebe TV Master Only (No FM)",
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0xe00,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x400, 0x400, 0x400, 0x400 },
.gpiomute = 0x800,
.pll = PLL_28,
.tuner_type = TUNER_TEMIC_4036FY5_NTSC,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_ASKEY_CPH03X] = {
/* Matti Mottus <mottus@physic.ut.ee> */
.name = "Askey CPH03x TV Capturer",
.video_inputs = 4,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x03000F,
.muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = { 2, 0, 0, 0 },
.gpiomute = 1,
.pll = PLL_28,
.tuner_type = TUNER_TEMIC_PAL,
.tuner_addr = ADDR_UNSET,
.has_remote = 1,
},
/* ---- card 0x3c ---------------------------------- */
[BTTV_BOARD_MM100PCTV] = {
/* Philip Blundell <philb@gnu.org> */
.name = "Modular Technology MM100PCTV",
.video_inputs = 2,
/* .audio_inputs= 2, */
.svhs = NO_SVHS,
.gpiomask = 11,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 2, 0, 0, 1 },
.gpiomute = 8,
.pll = PLL_35,
.tuner_type = TUNER_TEMIC_PAL,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_GMV1] = {
/* Adrian Cox <adrian@humboldt.co.uk */
.name = "AG Electronics GMV1",
.video_inputs = 2,
/* .audio_inputs= 0, */
.svhs = 1,
.gpiomask = 0xF,
.muxsel = MUXSEL(2, 2),
.gpiomux = { },
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_BESTBUY_EASYTV2] = {
/* Miguel Angel Alvarez <maacruz@navegalia.com>
new Easy TV BT878 version (model CPH061)
special thanks to Informatica Mieres for providing the card */
.name = "Askey CPH061/ BESTBUY Easy TV (bt878)",
.video_inputs = 3,
/* .audio_inputs= 2, */
.svhs = 2,
.gpiomask = 0xFF,
.muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = { 1, 0, 4, 4 },
.gpiomute = 9,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_ATI_TVWONDER] = {
/* Lukas Gebauer <geby@volny.cz> */
.name = "ATI TV-Wonder",
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0xf03f,
.muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = { 0xbffe, 0, 0xbfff, 0 },
.gpiomute = 0xbffe,
.pll = PLL_28,
.tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
.tuner_addr = ADDR_UNSET,
},
/* ---- card 0x40 ---------------------------------- */
[BTTV_BOARD_ATI_TVWONDERVE] = {
/* Lukas Gebauer <geby@volny.cz> */
.name = "ATI TV-Wonder VE",
.video_inputs = 2,
/* .audio_inputs= 1, */
.svhs = NO_SVHS,
.gpiomask = 1,
.muxsel = MUXSEL(2, 3, 0, 1),
.gpiomux = { 0, 0, 1, 0 },
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_FLYVIDEO2000] = {
/* DeeJay <deejay@westel900.net (2000S) */
.name = "Lifeview FlyVideo 2000S LR90",
.video_inputs = 3,
/* .audio_inputs= 3, */
.svhs = 2,
.gpiomask = 0x18e0,
.muxsel = MUXSEL(2, 3, 0, 1),
/* Radio changed from 1e80 to 0x800 to make
FlyVideo2000S in .hu happy (gm)*/
/* -dk-???: set mute=0x1800 for tda9874h daughterboard */
.gpiomux = { 0x0000,0x0800,0x1000,0x1000 },
.gpiomute = 0x1800,
.audio_mode_gpio= fv2000s_audio,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_TERRATVALUER] = {
.name = "Terratec TValueRadio",
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0xffff00,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x500, 0x500, 0x300, 0x900 },
.gpiomute = 0x900,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.has_radio = 1,
},
[BTTV_BOARD_GVBCTV4PCI] = {
/* TANAKA Kei <peg00625@nifty.com> */
.name = "IODATA GV-BCTV4/PCI",
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x010f00,
.muxsel = MUXSEL(2, 3, 0, 0),
.gpiomux = {0x10000, 0, 0x10000, 0 },
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_SHARP_2U5JF5540_NTSC,
.tuner_addr = ADDR_UNSET,
.audio_mode_gpio= gvbctv3pci_audio,
},
/* ---- card 0x44 ---------------------------------- */
[BTTV_BOARD_VOODOOTV_FM] = {
.name = "3Dfx VoodooTV FM (Euro)",
/* try "insmod msp3400 simple=0" if you have
* sound problems with this card. */
.video_inputs = 4,
/* .audio_inputs= 1, */
.svhs = NO_SVHS,
.gpiomask = 0x4f8a00,
/* 0x100000: 1=MSP enabled (0=disable again)
* 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
.gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff },
.gpiomute = 0x947fff,
/* tvtuner, radio, external,internal, mute, stereo
* tuner, Composite, SVid, Composite-on-Svid-adapter */
.muxsel = MUXSEL(2, 3, 0, 1),
.tuner_type = TUNER_MT2032,
.tuner_addr = ADDR_UNSET,
.pll = PLL_28,
.has_radio = 1,
},
[BTTV_BOARD_VOODOOTV_200] = {
.name = "VoodooTV 200 (USA)",
/* try "insmod msp3400 simple=0" if you have
* sound problems with this card. */
.video_inputs = 4,
/* .audio_inputs= 1, */
.svhs = NO_SVHS,
.gpiomask = 0x4f8a00,
/* 0x100000: 1=MSP enabled (0=disable again)
* 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
.gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff },
.gpiomute = 0x947fff,
/* tvtuner, radio, external,internal, mute, stereo
* tuner, Composite, SVid, Composite-on-Svid-adapter */
.muxsel = MUXSEL(2, 3, 0, 1),
.tuner_type = TUNER_MT2032,
.tuner_addr = ADDR_UNSET,
.pll = PLL_28,
.has_radio = 1,
},
[BTTV_BOARD_AIMMS] = {
/* Philip Blundell <pb@nexus.co.uk> */
.name = "Active Imaging AIMMS",
.video_inputs = 1,
/* .audio_inputs= 0, */
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.pll = PLL_28,
.muxsel = MUXSEL(2),
.gpiomask = 0
},
[BTTV_BOARD_PV_BT878P_PLUS] = {
/* Tomasz Pyra <hellfire@sedez.iq.pl> */
.name = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
.video_inputs = 3,
/* .audio_inputs= 4, */
.svhs = 2,
.gpiomask = 15,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */
.gpiomute = 13,
.pll = PLL_28,
.tuner_type = TUNER_LG_PAL_I_FM,
.tuner_addr = ADDR_UNSET,
.has_remote = 1,
/* GPIO wiring:
GPIO0: U4.A0 (hef4052bt)
GPIO1: U4.A1
GPIO2: U4.A1 (second hef4052bt)
GPIO3: U4.nEN, U5.A0, A5.nEN
GPIO8-15: vrd866b ?
*/
},
[BTTV_BOARD_FLYVIDEO98EZ] = {
.name = "Lifeview FlyVideo 98EZ (capture only) LR51",
.video_inputs = 4,
/* .audio_inputs= 0, */
.svhs = 2,
/* AV1, AV2, SVHS, CVid adapter on SVHS */
.muxsel = MUXSEL(2, 3, 1, 1),
.pll = PLL_28,
.no_msp34xx = 1,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
/* ---- card 0x48 ---------------------------------- */
[BTTV_BOARD_PV_BT878P_9B] = {
/* Dariusz Kowalewski <darekk@automex.pl> */
.name = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
.video_inputs = 4,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x3f,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x01, 0x00, 0x03, 0x03 },
.gpiomute = 0x09,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.audio_mode_gpio= pvbt878p9b_audio, /* Note: not all cards have stereo */
.has_radio = 1, /* Note: not all cards have radio */
.has_remote = 1,
/* GPIO wiring:
GPIO0: A0 hef4052
GPIO1: A1 hef4052
GPIO3: nEN hef4052
GPIO8-15: vrd866b
GPIO20,22,23: R30,R29,R28
*/
},
[BTTV_BOARD_SENSORAY311_611] = {
/* Clay Kunz <ckunz@mail.arc.nasa.gov> */
/* you must jumper JP5 for the 311 card (PC/104+) to work */
.name = "Sensoray 311/611",
.video_inputs = 5,
/* .audio_inputs= 0, */
.svhs = 4,
.gpiomask = 0,
.muxsel = MUXSEL(2, 3, 1, 0, 0),
.gpiomux = { 0 },
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_RV605] = {
/* Miguel Freitas <miguel@cetuc.puc-rio.br> */
.name = "RemoteVision MX (RV605)",
.video_inputs = 16,
/* .audio_inputs= 0, */
.svhs = NO_SVHS,
.gpiomask = 0x00,
.gpiomask2 = 0x07ff,
.muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
.no_msp34xx = 1,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.muxsel_hook = rv605_muxsel,
},
[BTTV_BOARD_POWERCLR_MTV878] = {
.name = "Powercolor MTV878/ MTV878R/ MTV878F",
.video_inputs = 3,
/* .audio_inputs= 2, */
.svhs = 2,
.gpiomask = 0x1C800F, /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
.muxsel = MUXSEL(2, 1, 1),
.gpiomux = { 0, 1, 2, 2 },
.gpiomute = 4,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.pll = PLL_28,
.has_radio = 1,
},
/* ---- card 0x4c ---------------------------------- */
[BTTV_BOARD_WINDVR] = {
/* Masaki Suzuki <masaki@btree.org> */
.name = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x140007,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 1, 2, 3 },
.gpiomute = 4,
.tuner_type = TUNER_PHILIPS_NTSC,
.tuner_addr = ADDR_UNSET,
.audio_mode_gpio= windvr_audio,
},
[BTTV_BOARD_GRANDTEC_MULTI] = {
.name = "GrandTec Multi Capture Card (Bt878)",
.video_inputs = 4,
/* .audio_inputs= 0, */
.svhs = NO_SVHS,
.gpiomask = 0,
.muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = { 0 },
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_KWORLD] = {
.name = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
.video_inputs = 4,
/* .audio_inputs= 3, */
.svhs = 2,
.gpiomask = 7,
/* Tuner, SVid, SVHS, SVid to SVHS connector */
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio!
* This card lacks external Audio In, so we mute it on Ext. & Int.
* The PCB can take a sbx1637/sbx1673, wiring unknown.
* This card lacks PCI subsystem ID, sigh.
* gpiomux =1: lower volume, 2+3: mute
* btwincap uses 0x80000/0x80003
*/
.gpiomute = 4,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
/* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
radio signal strength indicators work fine. */
.has_radio = 1,
/* GPIO Info:
GPIO0,1: HEF4052 A0,A1
GPIO2: HEF4052 nENABLE
GPIO3-7: n.c.
GPIO8-13: IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
GPIO14,15: ??
GPIO16-21: n.c.
GPIO22,23: ??
?? : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
},
[BTTV_BOARD_DSP_TCVIDEO] = {
/* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
.name = "DSP Design TCVIDEO",
.video_inputs = 4,
.svhs = NO_SVHS,
.muxsel = MUXSEL(2, 3, 1, 0),
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
},
/* ---- card 0x50 ---------------------------------- */
[BTTV_BOARD_HAUPPAUGEPVR] = {
.name = "Hauppauge WinTV PVR",
.video_inputs = 4,
/* .audio_inputs= 1, */
.svhs = 2,
.muxsel = MUXSEL(2, 0, 1, 1),
.pll = PLL_28,
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.gpiomask = 7,
.gpiomux = {7},
},
[BTTV_BOARD_GVBCTV5PCI] = {
.name = "IODATA GV-BCTV5/PCI",
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x0f0f80,
.muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = {0x030000, 0x010000, 0, 0 },
.gpiomute = 0x020000,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_NTSC_M,
.tuner_addr = ADDR_UNSET,
.audio_mode_gpio= gvbctv5pci_audio,
.has_radio = 1,
},
[BTTV_BOARD_OSPREY1x0] = {
.name = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
.video_inputs = 4, /* id-inputs-clock */
/* .audio_inputs= 0, */
.svhs = 3,
.muxsel = MUXSEL(3, 2, 0, 1),
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda7432 = 1,
},
[BTTV_BOARD_OSPREY1x0_848] = {
.name = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
.video_inputs = 3,
/* .audio_inputs= 0, */
.svhs = 2,
.muxsel = MUXSEL(2, 3, 1),
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda7432 = 1,
},
/* ---- card 0x54 ---------------------------------- */
[BTTV_BOARD_OSPREY101_848] = {
.name = "Osprey 101 (848)", /* 0x05-40C0-C1 */
.video_inputs = 2,
/* .audio_inputs= 0, */
.svhs = 1,
.muxsel = MUXSEL(3, 1),
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda7432 = 1,
},
[BTTV_BOARD_OSPREY1x1] = {
.name = "Osprey 101/151", /* 0x1(4|5)-0004-C4 */
.video_inputs = 1,
/* .audio_inputs= 0, */
.svhs = NO_SVHS,
.muxsel = MUXSEL(0),
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda7432 = 1,
},
[BTTV_BOARD_OSPREY1x1_SVID] = {
.name = "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */
.video_inputs = 2,
/* .audio_inputs= 0, */
.svhs = 1,
.muxsel = MUXSEL(0, 1),
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda7432 = 1,
},
[BTTV_BOARD_OSPREY2xx] = {
.name = "Osprey 200/201/250/251", /* 0x1(8|9|E|F)-0004-C4 */
.video_inputs = 1,
/* .audio_inputs= 1, */
.svhs = NO_SVHS,
.muxsel = MUXSEL(0),
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda7432 = 1,
},
/* ---- card 0x58 ---------------------------------- */
[BTTV_BOARD_OSPREY2x0_SVID] = {
.name = "Osprey 200/250", /* 0x1(A|B)-00C4-C1 */
.video_inputs = 2,
/* .audio_inputs= 1, */
.svhs = 1,
.muxsel = MUXSEL(0, 1),
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda7432 = 1,
},
[BTTV_BOARD_OSPREY2x0] = {
.name = "Osprey 210/220/230", /* 0x1(A|B)-04C0-C1 */
.video_inputs = 2,
/* .audio_inputs= 1, */
.svhs = 1,
.muxsel = MUXSEL(2, 3),
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda7432 = 1,
},
[BTTV_BOARD_OSPREY500] = {
.name = "Osprey 500", /* 500 */
.video_inputs = 2,
/* .audio_inputs= 1, */
.svhs = 1,
.muxsel = MUXSEL(2, 3),
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda7432 = 1,
},
[BTTV_BOARD_OSPREY540] = {
.name = "Osprey 540", /* 540 */
.video_inputs = 4,
/* .audio_inputs= 1, */
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda7432 = 1,
},
/* ---- card 0x5C ---------------------------------- */
[BTTV_BOARD_OSPREY2000] = {
.name = "Osprey 2000", /* 2000 */
.video_inputs = 2,
/* .audio_inputs= 1, */
.svhs = 1,
.muxsel = MUXSEL(2, 3),
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda7432 = 1, /* must avoid, conflicts with the bt860 */
},
[BTTV_BOARD_IDS_EAGLE] = {
/* M G Berberich <berberic@forwiss.uni-passau.de> */
.name = "IDS Eagle",
.video_inputs = 4,
/* .audio_inputs= 0, */
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.svhs = NO_SVHS,
.gpiomask = 0,
.muxsel = MUXSEL(2, 2, 2, 2),
.muxsel_hook = eagle_muxsel,
.no_msp34xx = 1,
.pll = PLL_28,
},
[BTTV_BOARD_PINNACLESAT] = {
.name = "Pinnacle PCTV Sat",
.video_inputs = 2,
/* .audio_inputs= 0, */
.svhs = 1,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda7432 = 1,
.muxsel = MUXSEL(3, 1),
.pll = PLL_28,
.no_gpioirq = 1,
.has_dvb = 1,
},
[BTTV_BOARD_FORMAC_PROTV] = {
.name = "Formac ProTV II (bt878)",
.video_inputs = 4,
/* .audio_inputs= 1, */
.svhs = 3,
.gpiomask = 2,
/* TV, Comp1, Composite over SVID con, SVID */
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 2, 2, 0, 0 },
.pll = PLL_28,
.has_radio = 1,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
/* sound routing:
GPIO=0x00,0x01,0x03: mute (?)
0x02: both TV and radio (tuner: FM1216/I)
The card has onboard audio connectors labeled "cdrom" and "board",
not soldered here, though unknown wiring.
Card lacks: external audio in, pci subsystem id.
*/
},
/* ---- card 0x60 ---------------------------------- */
[BTTV_BOARD_MACHTV] = {
.name = "MachTV",
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = NO_SVHS,
.gpiomask = 7,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 1, 2, 3},
.gpiomute = 4,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.pll = PLL_28,
},
[BTTV_BOARD_EURESYS_PICOLO] = {
.name = "Euresys Picolo",
.video_inputs = 3,
/* .audio_inputs= 0, */
.svhs = 2,
.gpiomask = 0,
.no_msp34xx = 1,
.no_tda7432 = 1,
.muxsel = MUXSEL(2, 0, 1),
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_PV150] = {
/* Luc Van Hoeylandt <luc@e-magic.be> */
.name = "ProVideo PV150", /* 0x4f */
.video_inputs = 2,
/* .audio_inputs= 0, */
.svhs = NO_SVHS,
.gpiomask = 0,
.muxsel = MUXSEL(2, 3),
.gpiomux = { 0 },
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_AD_TVK503] = {
/* Hiroshi Takekawa <sian@big.or.jp> */
/* This card lacks subsystem ID */
.name = "AD-TVK503", /* 0x63 */
.video_inputs = 4,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x001e8007,
.muxsel = MUXSEL(2, 3, 1, 0),
/* Tuner, Radio, external, internal, off, on */
.gpiomux = { 0x08, 0x0f, 0x0a, 0x08 },
.gpiomute = 0x0f,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_NTSC,
.tuner_addr = ADDR_UNSET,
.audio_mode_gpio= adtvk503_audio,
},
/* ---- card 0x64 ---------------------------------- */
[BTTV_BOARD_HERCULES_SM_TV] = {
.name = "Hercules Smart TV Stereo",
.video_inputs = 4,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x00,
.muxsel = MUXSEL(2, 3, 1, 1),
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
/* Notes:
- card lacks subsystem ID
- stereo variant w/ daughter board with tda9874a @0xb0
- Audio Routing:
always from tda9874 independent of GPIO (?)
external line in: unknown
- Other chips: em78p156elp @ 0x96 (probably IR remote control)
hef4053 (instead 4052) for unknown function
*/
},
[BTTV_BOARD_PACETV] = {
.name = "Pace TV & Radio Card",
.video_inputs = 4,
/* .audio_inputs= 1, */
.svhs = 2,
/* Tuner, CVid, SVid, CVid over SVid connector */
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomask = 0,
.no_tda7432 = 1,
.tuner_type = TUNER_PHILIPS_PAL_I,
.tuner_addr = ADDR_UNSET,
.has_radio = 1,
.pll = PLL_28,
/* Bt878, Bt832, FI1246 tuner; no pci subsystem id
only internal line out: (4pin header) RGGL
Radio must be decoded by msp3410d (not routed through)*/
/*
.digital_mode = DIGITAL_MODE_CAMERA, todo!
*/
},
[BTTV_BOARD_IVC200] = {
/* Chris Willing <chris@vislab.usyd.edu.au> */
.name = "IVC-200",
.video_inputs = 1,
/* .audio_inputs= 0, */
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.svhs = NO_SVHS,
.gpiomask = 0xdf,
.muxsel = MUXSEL(2),
.pll = PLL_28,
},
[BTTV_BOARD_IVCE8784] = {
.name = "IVCE-8784",
.video_inputs = 1,
/* .audio_inputs= 0, */
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.svhs = NO_SVHS,
.gpiomask = 0xdf,
.muxsel = MUXSEL(2),
.pll = PLL_28,
},
[BTTV_BOARD_XGUARD] = {
.name = "Grand X-Guard / Trust 814PCI",
.video_inputs = 16,
/* .audio_inputs= 0, */
.svhs = NO_SVHS,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.gpiomask2 = 0xff,
.muxsel = MUXSEL(2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0),
.muxsel_hook = xguard_muxsel,
.no_msp34xx = 1,
.no_tda7432 = 1,
.pll = PLL_28,
},
/* ---- card 0x68 ---------------------------------- */
[BTTV_BOARD_NEBULA_DIGITV] = {
.name = "Nebula Electronics DigiTV",
.video_inputs = 1,
.svhs = NO_SVHS,
.muxsel = MUXSEL(2, 3, 1, 0),
.no_msp34xx = 1,
.no_tda7432 = 1,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.has_dvb = 1,
.has_remote = 1,
.gpiomask = 0x1b,
.no_gpioirq = 1,
},
[BTTV_BOARD_PV143] = {
/* Jorge Boncompte - DTI2 <jorge@dti2.net> */
.name = "ProVideo PV143",
.video_inputs = 4,
/* .audio_inputs= 0, */
.svhs = NO_SVHS,
.gpiomask = 0,
.muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = { 0 },
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_VD009X1_VD011_MINIDIN] = {
/* M.Klahr@phytec.de */
.name = "PHYTEC VD-009-X1 VD-011 MiniDIN (bt878)",
.video_inputs = 4,
/* .audio_inputs= 0, */
.svhs = 3,
.gpiomask = 0x00,
.muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_VD009X1_VD011_COMBI] = {
.name = "PHYTEC VD-009-X1 VD-011 Combi (bt878)",
.video_inputs = 4,
/* .audio_inputs= 0, */
.svhs = 3,
.gpiomask = 0x00,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
/* ---- card 0x6c ---------------------------------- */
[BTTV_BOARD_VD009_MINIDIN] = {
.name = "PHYTEC VD-009 MiniDIN (bt878)",
.video_inputs = 10,
/* .audio_inputs= 0, */
.svhs = 9,
.gpiomask = 0x00,
.gpiomask2 = 0x03, /* used for external video mux */
.muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 0),
.muxsel_hook = phytec_muxsel,
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_VD009_COMBI] = {
.name = "PHYTEC VD-009 Combi (bt878)",
.video_inputs = 10,
/* .audio_inputs= 0, */
.svhs = 9,
.gpiomask = 0x00,
.gpiomask2 = 0x03, /* used for external video mux */
.muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1),
.muxsel_hook = phytec_muxsel,
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_IVC100] = {
.name = "IVC-100",
.video_inputs = 4,
/* .audio_inputs= 0, */
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.svhs = NO_SVHS,
.gpiomask = 0xdf,
.muxsel = MUXSEL(2, 3, 1, 0),
.pll = PLL_28,
},
[BTTV_BOARD_IVC120] = {
/* IVC-120G - Alan Garfield <alan@fromorbit.com> */
.name = "IVC-120G",
.video_inputs = 16,
/* .audio_inputs= 0, */
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.svhs = NO_SVHS, /* card has no svhs */
.no_msp34xx = 1,
.no_tda7432 = 1,
.gpiomask = 0x00,
.muxsel = MUXSEL(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0),
.muxsel_hook = ivc120_muxsel,
.pll = PLL_28,
},
/* ---- card 0x70 ---------------------------------- */
[BTTV_BOARD_PC_HDTV] = {
.name = "pcHDTV HD-2000 TV",
.video_inputs = 4,
/* .audio_inputs= 1, */
.svhs = 2,
.muxsel = MUXSEL(2, 3, 1, 0),
.tuner_type = TUNER_PHILIPS_FCV1236D,
.tuner_addr = ADDR_UNSET,
.has_dvb = 1,
},
[BTTV_BOARD_TWINHAN_DST] = {
.name = "Twinhan DST + clones",
.no_msp34xx = 1,
.no_tda7432 = 1,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.no_video = 1,
.has_dvb = 1,
},
[BTTV_BOARD_WINFASTVC100] = {
.name = "Winfast VC100",
.video_inputs = 3,
/* .audio_inputs= 0, */
.svhs = 1,
/* Vid In, SVid In, Vid over SVid in connector */
.muxsel = MUXSEL(3, 1, 1, 3),
.no_msp34xx = 1,
.no_tda7432 = 1,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.pll = PLL_28,
},
[BTTV_BOARD_TEV560] = {
.name = "Teppro TEV-560/InterVision IV-560",
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 3,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 1, 1, 1, 1 },
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.pll = PLL_35,
},
/* ---- card 0x74 ---------------------------------- */
[BTTV_BOARD_SIMUS_GVC1100] = {
.name = "SIMUS GVC1100",
.video_inputs = 4,
/* .audio_inputs= 0, */
.svhs = NO_SVHS,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.pll = PLL_28,
.muxsel = MUXSEL(2, 2, 2, 2),
.gpiomask = 0x3F,
.muxsel_hook = gvc1100_muxsel,
},
[BTTV_BOARD_NGSTV_PLUS] = {
/* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
.name = "NGS NGSTV+",
.video_inputs = 3,
.svhs = 2,
.gpiomask = 0x008007,
.muxsel = MUXSEL(2, 3, 0, 0),
.gpiomux = { 0, 0, 0, 0 },
.gpiomute = 0x000003,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.has_remote = 1,
},
[BTTV_BOARD_LMLBT4] = {
/* http://linuxmedialabs.com */
.name = "LMLBT4",
.video_inputs = 4, /* IN1,IN2,IN3,IN4 */
/* .audio_inputs= 0, */
.svhs = NO_SVHS,
.muxsel = MUXSEL(2, 3, 1, 0),
.no_msp34xx = 1,
.no_tda7432 = 1,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_TEKRAM_M205] = {
/* Helmroos Harri <harri.helmroos@pp.inet.fi> */
.name = "Tekram M205 PRO",
.video_inputs = 3,
/* .audio_inputs= 1, */
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.svhs = 2,
.gpiomask = 0x68,
.muxsel = MUXSEL(2, 3, 1),
.gpiomux = { 0x68, 0x68, 0x61, 0x61 },
.pll = PLL_28,
},
/* ---- card 0x78 ---------------------------------- */
[BTTV_BOARD_CONTVFMI] = {
/* Javier Cendan Ares <jcendan@lycos.es> */
/* bt878 TV + FM without subsystem ID */
.name = "Conceptronic CONTVFMi",
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x008007,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 1, 2, 2 },
.gpiomute = 3,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.has_remote = 1,
.has_radio = 1,
},
[BTTV_BOARD_PICOLO_TETRA_CHIP] = {
/*Eric DEBIEF <debief@telemsa.com>*/
/*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controlled*/
/*adds picolo_tetra_muxsel(), picolo_tetra_init(), the following declaration*/
/*structure and #define BTTV_BOARD_PICOLO_TETRA_CHIP 0x79 in bttv.h*/
.name = "Euresys Picolo Tetra",
.video_inputs = 4,
/* .audio_inputs= 0, */
.svhs = NO_SVHS,
.gpiomask = 0,
.gpiomask2 = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
.no_msp34xx = 1,
.no_tda7432 = 1,
/*878A input is always MUX0, see above.*/
.muxsel = MUXSEL(2, 2, 2, 2),
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
.pll = PLL_28,
.muxsel_hook = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_SPIRIT_TV] = {
/* Spirit TV Tuner from http://spiritmodems.com.au */
/* Stafford Goodsell <surge@goliath.homeunix.org> */
.name = "Spirit TV Tuner",
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x0000000f,
.muxsel = MUXSEL(2, 1, 1),
.gpiomux = { 0x02, 0x00, 0x00, 0x00 },
.tuner_type = TUNER_TEMIC_PAL,
.tuner_addr = ADDR_UNSET,
.no_msp34xx = 1,
},
[BTTV_BOARD_AVDVBT_771] = {
/* Wolfram Joost <wojo@frokaschwei.de> */
.name = "AVerMedia AVerTV DVB-T 771",
.video_inputs = 2,
.svhs = 1,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.muxsel = MUXSEL(3, 3),
.no_msp34xx = 1,
.no_tda7432 = 1,
.pll = PLL_28,
.has_dvb = 1,
.no_gpioirq = 1,
.has_remote = 1,
},
/* ---- card 0x7c ---------------------------------- */
[BTTV_BOARD_AVDVBT_761] = {
/* Matt Jesson <dvb@jesson.eclipse.co.uk> */
/* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */
.name = "AverMedia AverTV DVB-T 761",
.video_inputs = 2,
.svhs = 1,
.muxsel = MUXSEL(3, 1, 2, 0), /* Comp0, S-Video, ?, ? */
.no_msp34xx = 1,
.no_tda7432 = 1,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.has_dvb = 1,
.no_gpioirq = 1,
.has_remote = 1,
},
[BTTV_BOARD_MATRIX_VISIONSQ] = {
/* andre.schwarz@matrix-vision.de */
.name = "MATRIX Vision Sigma-SQ",
.video_inputs = 16,
/* .audio_inputs= 0, */
.svhs = NO_SVHS,
.gpiomask = 0x0,
.muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3),
.muxsel_hook = sigmaSQ_muxsel,
.gpiomux = { 0 },
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_MATRIX_VISIONSLC] = {
/* andre.schwarz@matrix-vision.de */
.name = "MATRIX Vision Sigma-SLC",
.video_inputs = 4,
/* .audio_inputs= 0, */
.svhs = NO_SVHS,
.gpiomask = 0x0,
.muxsel = MUXSEL(2, 2, 2, 2),
.muxsel_hook = sigmaSLC_muxsel,
.gpiomux = { 0 },
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
/* BTTV_BOARD_APAC_VIEWCOMP */
[BTTV_BOARD_APAC_VIEWCOMP] = {
/* Attila Kondoros <attila.kondoros@chello.hu> */
/* bt878 TV + FM 0x00000000 subsystem ID */
.name = "APAC Viewcomp 878(AMAX)",
.video_inputs = 2,
/* .audio_inputs= 1, */
.svhs = NO_SVHS,
.gpiomask = 0xFF,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 2, 0, 0, 0 },
.gpiomute = 10,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.has_remote = 1, /* miniremote works, see ir-kbd-gpio.c */
.has_radio = 1, /* not every card has radio */
},
/* ---- card 0x80 ---------------------------------- */
[BTTV_BOARD_DVICO_DVBT_LITE] = {
/* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
.name = "DViCO FusionHDTV DVB-T Lite",
.no_msp34xx = 1,
.no_tda7432 = 1,
.pll = PLL_28,
.no_video = 1,
.has_dvb = 1,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_VGEAR_MYVCD] = {
/* Steven <photon38@pchome.com.tw> */
.name = "V-Gear MyVCD",
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x3f,
.muxsel = MUXSEL(2, 3, 1, 0),
.gpiomux = {0x31, 0x31, 0x31, 0x31 },
.gpiomute = 0x31,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_NTSC_M,
.tuner_addr = ADDR_UNSET,
.has_radio = 0,
},
[BTTV_BOARD_SUPER_TV] = {
/* Rick C <cryptdragoon@gmail.com> */
.name = "Super TV Tuner",
.video_inputs = 4,
/* .audio_inputs= 1, */
.svhs = 2,
.muxsel = MUXSEL(2, 3, 1, 0),
.tuner_type = TUNER_PHILIPS_NTSC,
.tuner_addr = ADDR_UNSET,
.gpiomask = 0x008007,
.gpiomux = { 0, 0x000001,0,0 },
.has_radio = 1,
},
[BTTV_BOARD_TIBET_CS16] = {
/* Chris Fanning <video4linux@haydon.net> */
.name = "Tibet Systems 'Progress DVR' CS16",
.video_inputs = 16,
/* .audio_inputs= 0, */
.svhs = NO_SVHS,
.muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
.pll = PLL_28,
.no_msp34xx = 1,
.no_tda7432 = 1,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.muxsel_hook = tibetCS16_muxsel,
},
[BTTV_BOARD_KODICOM_4400R] = {
/* Bill Brack <wbrack@mmm.com.hk> */
/*
* Note that, because of the card's wiring, the "master"
* BT878A chip (i.e. the one which controls the analog switch
* and must use this card type) is the 2nd one detected. The
* other 3 chips should use card type 0x85, whose description
* follows this one. There is a EEPROM on the card (which is
* connected to the I2C of one of those other chips), but is
* not currently handled. There is also a facility for a
* "monitor", which is also not currently implemented.
*/
.name = "Kodicom 4400R (master)",
.video_inputs = 16,
/* .audio_inputs= 0, */
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.svhs = NO_SVHS,
/* GPIO bits 0-9 used for analog switch:
* 00 - 03: camera selector
* 04 - 06: channel (controller) selector
* 07: data (1->on, 0->off)
* 08: strobe
* 09: reset
* bit 16 is input from sync separator for the channel
*/
.gpiomask = 0x0003ff,
.no_gpioirq = 1,
.muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
.pll = PLL_28,
.no_msp34xx = 1,
.no_tda7432 = 1,
.muxsel_hook = kodicom4400r_muxsel,
},
[BTTV_BOARD_KODICOM_4400R_SL] = {
/* Bill Brack <wbrack@mmm.com.hk> */
/* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
* one which controls the analog switch, and must use the card type)
* is the 2nd one detected. The other 3 chips should use this card
* type
*/
.name = "Kodicom 4400R (slave)",
.video_inputs = 16,
/* .audio_inputs= 0, */
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.svhs = NO_SVHS,
.gpiomask = 0x010000,
.no_gpioirq = 1,
.muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
.pll = PLL_28,
.no_msp34xx = 1,
.no_tda7432 = 1,
.muxsel_hook = kodicom4400r_muxsel,
},
/* ---- card 0x86---------------------------------- */
[BTTV_BOARD_ADLINK_RTV24] = {
/* Michael Henson <mhenson@clarityvi.com> */
/* Adlink RTV24 with special unlock codes */
.name = "Adlink RTV24",
.video_inputs = 4,
/* .audio_inputs= 1, */
.svhs = 2,
.muxsel = MUXSEL(2, 3, 1, 0),
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.pll = PLL_28,
},
/* ---- card 0x87---------------------------------- */
[BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = {
/* Michael Krufky <mkrufky@linuxtv.org> */
.name = "DViCO FusionHDTV 5 Lite",
.tuner_type = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */
.tuner_addr = ADDR_UNSET,
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = 2,
.muxsel = MUXSEL(2, 3, 1),
.gpiomask = 0x00e00007,
.gpiomux = { 0x00400005, 0, 0x00000001, 0 },
.gpiomute = 0x00c00007,
.no_msp34xx = 1,
.no_tda7432 = 1,
.has_dvb = 1,
},
/* ---- card 0x88---------------------------------- */
[BTTV_BOARD_ACORP_Y878F] = {
/* Mauro Carvalho Chehab <mchehab@kernel.org> */
.name = "Acorp Y878F",
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x01fe00,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x001e00, 0, 0x018000, 0x014000 },
.gpiomute = 0x002000,
.pll = PLL_28,
.tuner_type = TUNER_YMEC_TVF66T5_B_DFF,
.tuner_addr = 0xc1 >>1,
.has_radio = 1,
},
/* ---- card 0x89 ---------------------------------- */
[BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = {
.name = "Conceptronic CTVFMi v2",
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x001c0007,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 1, 2, 2 },
.gpiomute = 3,
.pll = PLL_28,
.tuner_type = TUNER_TENA_9533_DI,
.tuner_addr = ADDR_UNSET,
.has_remote = 1,
.has_radio = 1,
},
/* ---- card 0x8a ---------------------------------- */
[BTTV_BOARD_PV_BT878P_2E] = {
.name = "Prolink Pixelview PV-BT878P+ (Rev.2E)",
.video_inputs = 5,
/* .audio_inputs= 1, */
.svhs = 3,
.has_dig_in = 1,
.gpiomask = 0x01fe00,
.muxsel = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
/* .digital_mode= DIGITAL_MODE_CAMERA, */
.gpiomux = { 0x00400, 0x10400, 0x04400, 0x80000 },
.gpiomute = 0x12400,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_LG_PAL_FM,
.tuner_addr = ADDR_UNSET,
.has_remote = 1,
},
/* ---- card 0x8b ---------------------------------- */
[BTTV_BOARD_PV_M4900] = {
/* Sérgio Fortier <sergiofortier@yahoo.com.br> */
.name = "Prolink PixelView PlayTV MPEG2 PV-M4900",
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x3f,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x21, 0x20, 0x24, 0x2c },
.gpiomute = 0x29,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_YMEC_TVF_5533MF,
.tuner_addr = ADDR_UNSET,
.has_radio = 1,
.has_remote = 1,
},
/* ---- card 0x8c ---------------------------------- */
/* Has four Bt878 chips behind a PCI bridge, each chip has:
one external BNC composite input (mux 2)
three internal composite inputs (unknown muxes)
an 18-bit stereo A/D (CS5331A), which has:
one external stereo unbalanced (RCA) audio connection
one (or 3?) internal stereo balanced (XLR) audio connection
input is selected via gpio to a 14052B mux
(mask=0x300, unbal=0x000, bal=0x100, ??=0x200,0x300)
gain is controlled via an X9221A chip on the I2C bus @0x28
sample rate is controlled via gpio to an MK1413S
(mask=0x3, 32kHz=0x0, 44.1kHz=0x1, 48kHz=0x2, ??=0x3)
There is neither a tuner nor an svideo input. */
[BTTV_BOARD_OSPREY440] = {
.name = "Osprey 440",
.video_inputs = 4,
/* .audio_inputs= 2, */
.svhs = NO_SVHS,
.muxsel = MUXSEL(2, 3, 0, 1), /* 3,0,1 are guesses */
.gpiomask = 0x303,
.gpiomute = 0x000, /* int + 32kHz */
.gpiomux = { 0, 0, 0x000, 0x100},
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda7432 = 1,
},
/* ---- card 0x8d ---------------------------------- */
[BTTV_BOARD_ASOUND_SKYEYE] = {
.name = "Asound Skyeye PCTV",
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 15,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 2, 0, 0, 0 },
.gpiomute = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_NTSC,
.tuner_addr = ADDR_UNSET,
},
/* ---- card 0x8e ---------------------------------- */
[BTTV_BOARD_SABRENT_TVFM] = {
.name = "Sabrent TV-FM (bttv version)",
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x108007,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 100000, 100002, 100002, 100000 },
.no_msp34xx = 1,
.no_tda7432 = 1,
.pll = PLL_28,
.tuner_type = TUNER_TNF_5335MF,
.tuner_addr = ADDR_UNSET,
.has_radio = 1,
},
/* ---- card 0x8f ---------------------------------- */
[BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = {
.name = "Hauppauge ImpactVCB (bt878)",
.video_inputs = 4,
/* .audio_inputs= 0, */
.svhs = NO_SVHS,
.gpiomask = 0x0f, /* old: 7 */
.muxsel = MUXSEL(0, 1, 3, 2), /* Composite 0-3 */
.no_msp34xx = 1,
.no_tda7432 = 1,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_MACHTV_MAGICTV] = {
/* Julian Calaby <julian.calaby@gmail.com>
* Slightly different from original MachTV definition (0x60)
* FIXME: RegSpy says gpiomask should be "0x001c800f", but it
* stuffs up remote chip. Bug is a pin on the jaecs is not set
* properly (methinks) causing no keyup bits being set */
.name = "MagicTV", /* rebranded MachTV */
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 7,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 1, 2, 3 },
.gpiomute = 4,
.tuner_type = TUNER_TEMIC_4009FR5_PAL,
.tuner_addr = ADDR_UNSET,
.pll = PLL_28,
.has_radio = 1,
.has_remote = 1,
},
[BTTV_BOARD_SSAI_SECURITY] = {
.name = "SSAI Security Video Interface",
.video_inputs = 4,
/* .audio_inputs= 0, */
.svhs = NO_SVHS,
.muxsel = MUXSEL(0, 1, 2, 3),
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_SSAI_ULTRASOUND] = {
.name = "SSAI Ultrasound Video Interface",
.video_inputs = 2,
/* .audio_inputs= 0, */
.svhs = 1,
.muxsel = MUXSEL(2, 0, 1, 3),
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
/* ---- card 0x94---------------------------------- */
[BTTV_BOARD_DVICO_FUSIONHDTV_2] = {
.name = "DViCO FusionHDTV 2",
.tuner_type = TUNER_PHILIPS_FCV1236D,
.tuner_addr = ADDR_UNSET,
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = 2,
.muxsel = MUXSEL(2, 3, 1),
.gpiomask = 0x00e00007,
.gpiomux = { 0x00400005, 0, 0x00000001, 0 },
.gpiomute = 0x00c00007,
.no_msp34xx = 1,
.no_tda7432 = 1,
},
/* ---- card 0x95---------------------------------- */
[BTTV_BOARD_TYPHOON_TVTUNERPCI] = {
.name = "Typhoon TV-Tuner PCI (50684)",
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x3014f,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0x20001,0x10001, 0, 0 },
.gpiomute = 10,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL_I,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_GEOVISION_GV600] = {
/* emhn@usb.ve */
.name = "Geovision GV-600",
.video_inputs = 16,
/* .audio_inputs= 0, */
.svhs = NO_SVHS,
.gpiomask = 0x0,
.muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
.muxsel_hook = geovision_muxsel,
.gpiomux = { 0 },
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_KOZUMI_KTV_01C] = {
/* Mauro Lacy <mauro@lacy.com.ar>
* Based on MagicTV and Conceptronic CONTVFMi */
.name = "Kozumi KTV-01C",
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x008007,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 1, 2, 2 }, /* CONTVFMi */
.gpiomute = 3, /* CONTVFMi */
.tuner_type = TUNER_PHILIPS_FM1216ME_MK3, /* TCL MK3 */
.tuner_addr = ADDR_UNSET,
.pll = PLL_28,
.has_radio = 1,
.has_remote = 1,
},
[BTTV_BOARD_ENLTV_FM_2] = {
/* Encore TV Tuner Pro ENL TV-FM-2
Mauro Carvalho Chehab <mchehab@kernel.org> */
.name = "Encore ENL TV-FM-2",
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = 2,
/* bit 6 -> IR disabled
bit 18/17 = 00 -> mute
01 -> enable external audio input
10 -> internal audio input (mono?)
11 -> internal audio input
*/
.gpiomask = 0x060040,
.muxsel = MUXSEL(2, 3, 3),
.gpiomux = { 0x60000, 0x60000, 0x20000, 0x20000 },
.gpiomute = 0,
.tuner_type = TUNER_TCL_MF02GIP_5N,
.tuner_addr = ADDR_UNSET,
.pll = PLL_28,
.has_radio = 1,
.has_remote = 1,
},
[BTTV_BOARD_VD012] = {
/* D.Heer@Phytec.de */
.name = "PHYTEC VD-012 (bt878)",
.video_inputs = 4,
/* .audio_inputs= 0, */
.svhs = NO_SVHS,
.gpiomask = 0x00,
.muxsel = MUXSEL(0, 2, 3, 1),
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_VD012_X1] = {
/* D.Heer@Phytec.de */
.name = "PHYTEC VD-012-X1 (bt878)",
.video_inputs = 4,
/* .audio_inputs= 0, */
.svhs = 3,
.gpiomask = 0x00,
.muxsel = MUXSEL(2, 3, 1),
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_VD012_X2] = {
/* D.Heer@Phytec.de */
.name = "PHYTEC VD-012-X2 (bt878)",
.video_inputs = 4,
/* .audio_inputs= 0, */
.svhs = 3,
.gpiomask = 0x00,
.muxsel = MUXSEL(3, 2, 1),
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_GEOVISION_GV800S] = {
/* Bruno Christo <bchristo@inf.ufsm.br>
*
* GeoVision GV-800(S) has 4 Conexant Fusion 878A:
* 1 audio input per BT878A = 4 audio inputs
* 4 video inputs per BT878A = 16 video inputs
* This is the first BT878A chip of the GV-800(S). It's the
* "master" chip and it controls the video inputs through an
* analog multiplexer (a CD22M3494) via some GPIO pins. The
* slaves should use card type 0x9e (following this one).
* There is a EEPROM on the card which is currently not handled.
* The audio input is not working yet.
*/
.name = "Geovision GV-800(S) (master)",
.video_inputs = 4,
/* .audio_inputs= 1, */
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.svhs = NO_SVHS,
.gpiomask = 0xf107f,
.no_gpioirq = 1,
.muxsel = MUXSEL(2, 2, 2, 2),
.pll = PLL_28,
.no_msp34xx = 1,
.no_tda7432 = 1,
.muxsel_hook = gv800s_muxsel,
},
[BTTV_BOARD_GEOVISION_GV800S_SL] = {
/* Bruno Christo <bchristo@inf.ufsm.br>
*
* GeoVision GV-800(S) has 4 Conexant Fusion 878A:
* 1 audio input per BT878A = 4 audio inputs
* 4 video inputs per BT878A = 16 video inputs
* The 3 other BT878A chips are "slave" chips of the GV-800(S)
* and should use this card type.
* The audio input is not working yet.
*/
.name = "Geovision GV-800(S) (slave)",
.video_inputs = 4,
/* .audio_inputs= 1, */
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.svhs = NO_SVHS,
.gpiomask = 0x00,
.no_gpioirq = 1,
.muxsel = MUXSEL(2, 2, 2, 2),
.pll = PLL_28,
.no_msp34xx = 1,
.no_tda7432 = 1,
.muxsel_hook = gv800s_muxsel,
},
[BTTV_BOARD_PV183] = {
.name = "ProVideo PV183", /* 0x9f */
.video_inputs = 2,
/* .audio_inputs= 0, */
.svhs = NO_SVHS,
.gpiomask = 0,
.muxsel = MUXSEL(2, 3),
.gpiomux = { 0 },
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
/* ---- card 0xa0---------------------------------- */
[BTTV_BOARD_TVT_TD3116] = {
.name = "Tongwei Video Technology TD-3116",
.video_inputs = 16,
.gpiomask = 0xc00ff,
.muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
.muxsel_hook = td3116_muxsel,
.svhs = NO_SVHS,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
},
[BTTV_BOARD_APOSONIC_WDVR] = {
.name = "Aposonic W-DVR",
.video_inputs = 4,
.svhs = NO_SVHS,
.muxsel = MUXSEL(2, 3, 1, 0),
.tuner_type = TUNER_ABSENT,
},
[BTTV_BOARD_ADLINK_MPG24] = {
/* Adlink MPG24 */
.name = "Adlink MPG24",
.video_inputs = 1,
/* .audio_inputs= 1, */
.svhs = NO_SVHS,
.muxsel = MUXSEL(2, 2, 2, 2),
.tuner_type = UNSET,
.tuner_addr = ADDR_UNSET,
.pll = PLL_28,
},
[BTTV_BOARD_BT848_CAP_14] = {
.name = "Bt848 Capture 14MHz",
.video_inputs = 4,
.svhs = 2,
.muxsel = MUXSEL(2, 3, 1, 0),
.pll = PLL_14,
.tuner_type = TUNER_ABSENT,
},
[BTTV_BOARD_CYBERVISION_CV06] = {
.name = "CyberVision CV06 (SV)",
.video_inputs = 4,
/* .audio_inputs= 0, */
.svhs = NO_SVHS,
.muxsel = MUXSEL(2, 3, 1, 0),
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_KWORLD_VSTREAM_XPERT] = {
/* Pojar George <geoubuntu@gmail.com> */
.name = "Kworld V-Stream Xpert TV PVR878",
.video_inputs = 3,
/* .audio_inputs= 1, */
.svhs = 2,
.gpiomask = 0x001c0007,
.muxsel = MUXSEL(2, 3, 1, 1),
.gpiomux = { 0, 1, 2, 2 },
.gpiomute = 3,
.pll = PLL_28,
.tuner_type = TUNER_TENA_9533_DI,
.tuner_addr = ADDR_UNSET,
.has_remote = 1,
.has_radio = 1,
},
/* ---- card 0xa6---------------------------------- */
[BTTV_BOARD_PCI_8604PW] = {
/* PCI-8604PW with special unlock sequence */
.name = "PCI-8604PW",
.video_inputs = 2,
/* .audio_inputs= 0, */
.svhs = NO_SVHS,
/* The second input is available on CN4, if populated.
* The other 5x2 header (CN2?) connects to the same inputs
* as the on-board BNCs */
.muxsel = MUXSEL(2, 3),
.tuner_type = TUNER_ABSENT,
.no_msp34xx = 1,
.no_tda7432 = 1,
.pll = PLL_35,
},
};
static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
/* ----------------------------------------------------------------------- */
static unsigned char eeprom_data[256];
/*
* identify card
*/
void bttv_idcard(struct bttv *btv)
{
unsigned int gpiobits;
int i,type;
/* read PCI subsystem ID */
btv->cardid = btv->c.pci->subsystem_device << 16;
btv->cardid |= btv->c.pci->subsystem_vendor;
if (0 != btv->cardid && 0xffffffff != btv->cardid) {
/* look for the card */
for (type = -1, i = 0; cards[i].id != 0; i++)
if (cards[i].id == btv->cardid)
type = i;
if (type != -1) {
/* found it */
pr_info("%d: detected: %s [card=%d], PCI subsystem ID is %04x:%04x\n",
btv->c.nr, cards[type].name, cards[type].cardnr,
btv->cardid & 0xffff,
(btv->cardid >> 16) & 0xffff);
btv->c.type = cards[type].cardnr;
} else {
/* 404 */
pr_info("%d: subsystem: %04x:%04x (UNKNOWN)\n",
btv->c.nr, btv->cardid & 0xffff,
(btv->cardid >> 16) & 0xffff);
pr_debug("please mail id, board name and the correct card= insmod option to linux-media@vger.kernel.org\n");
}
}
/* let the user override the autodetected type */
if (card[btv->c.nr] < bttv_num_tvcards)
btv->c.type=card[btv->c.nr];
/* print which card config we are using */
pr_info("%d: using: %s [card=%d,%s]\n",
btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type,
card[btv->c.nr] < bttv_num_tvcards
? "insmod option" : "autodetected");
/* overwrite gpio stuff ?? */
if (UNSET == audioall && UNSET == audiomux[0])
return;
if (UNSET != audiomux[0]) {
gpiobits = 0;
for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i];
gpiobits |= audiomux[i];
}
} else {
gpiobits = audioall;
for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
bttv_tvcards[btv->c.type].gpiomux[i] = audioall;
}
}
bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
pr_info("%d: gpio config override: mask=0x%x, mux=",
btv->c.nr, bttv_tvcards[btv->c.type].gpiomask);
for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
pr_cont("%s0x%x",
i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]);
}
pr_cont("\n");
}
/*
* (most) board specific initialisations goes here
*/
/* Some Modular Technology cards have an eeprom, but no subsystem ID */
static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
{
int type = -1;
if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13))
type = BTTV_BOARD_MODTEC_205;
else if (0 == strncmp(eeprom_data+20,"Picolo",7))
type = BTTV_BOARD_EURESYS_PICOLO;
else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */
if (-1 != type) {
btv->c.type = type;
pr_info("%d: detected by eeprom: %s [card=%d]\n",
btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
}
}
static void flyvideo_gpio(struct bttv *btv)
{
int gpio, has_remote, has_radio, is_capture_only;
int is_lr90, has_tda9820_tda9821;
int tuner_type = UNSET, ttype;
gpio_inout(0xffffff, 0);
udelay(8); /* without this we would see the 0x1800 mask */
gpio = gpio_read();
/* FIXME: must restore OUR_EN ??? */
/* all cards provide GPIO info, some have an additional eeprom
* LR50: GPIO coding can be found lower right CP1 .. CP9
* CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
* GPIO14-12: n.c.
* LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
* lowest 3 bytes are remote control codes (no handshake needed)
* xxxFFF: No remote control chip soldered
* xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
* Note: Some bits are Audio_Mask !
*/
ttype = (gpio & 0x0f0000) >> 16;
switch (ttype) {
case 0x0:
tuner_type = 2; /* NTSC, e.g. TPI8NSR11P */
break;
case 0x2:
tuner_type = 39; /* LG NTSC (newer TAPC series) TAPC-H701P */
break;
case 0x4:
tuner_type = 5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
break;
case 0x6:
tuner_type = 37; /* LG PAL (newer TAPC series) TAPC-G702P */
break;
case 0xC:
tuner_type = 3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
break;
default:
pr_info("%d: FlyVideo_gpio: unknown tuner type\n", btv->c.nr);
break;
}
has_remote = gpio & 0x800000;
has_radio = gpio & 0x400000;
/* unknown 0x200000;
* unknown2 0x100000; */
is_capture_only = !(gpio & 0x008000); /* GPIO15 */
has_tda9820_tda9821 = !(gpio & 0x004000);
is_lr90 = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */
/*
* gpio & 0x001000 output bit for audio routing */
if (is_capture_only)
tuner_type = TUNER_ABSENT; /* No tuner present */
pr_info("%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
btv->c.nr, has_radio ? "yes" : "no",
has_remote ? "yes" : "no", tuner_type, gpio);
pr_info("%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n",
btv->c.nr, is_lr90 ? "yes" : "no",
has_tda9820_tda9821 ? "yes" : "no",
is_capture_only ? "yes" : "no");
if (tuner_type != UNSET) /* only set if known tuner autodetected, else let insmod option through */
btv->tuner_type = tuner_type;
btv->has_radio = has_radio;
/* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
* LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
* Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
if (has_tda9820_tda9821)
btv->audio_mode_gpio = lt9415_audio;
/* todo: if(has_tda9874) btv->audio_mode_gpio = fv2000s_audio; */
}
static int miro_tunermap[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1,
14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 };
static int miro_fmtuner[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1,
1,1,1,1, 1,1,1,0, 0,0,0,0, 0,1,0,0 };
static void miro_pinnacle_gpio(struct bttv *btv)
{
int id,msp,gpio;
char *info;
gpio_inout(0xffffff, 0);
gpio = gpio_read();
id = ((gpio>>10) & 63) -1;
msp = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx");
if (id < 32) {
btv->tuner_type = miro_tunermap[id];
if (0 == (gpio & 0x20)) {
btv->has_radio = 1;
if (!miro_fmtuner[id]) {
btv->has_tea575x = 1;
btv->tea_gpio.wren = 6;
btv->tea_gpio.most = 7;
btv->tea_gpio.clk = 8;
btv->tea_gpio.data = 9;
tea575x_init(btv);
}
} else {
btv->has_radio = 0;
}
if (-1 != msp) {
if (btv->c.type == BTTV_BOARD_MIRO)
btv->c.type = BTTV_BOARD_MIROPRO;
if (btv->c.type == BTTV_BOARD_PINNACLE)
btv->c.type = BTTV_BOARD_PINNACLEPRO;
}
pr_info("%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
btv->c.nr, id+1, btv->tuner_type,
!btv->has_radio ? "no" :
(btv->has_tea575x ? "tea575x" : "fmtuner"),
(-1 == msp) ? "no" : "yes");
} else {
/* new cards with microtune tuner */
id = 63 - id;
btv->has_radio = 0;
switch (id) {
case 1:
info = "PAL / mono";
btv->tda9887_conf = TDA9887_INTERCARRIER;
break;
case 2:
info = "PAL+SECAM / stereo";
btv->has_radio = 1;
btv->tda9887_conf = TDA9887_QSS;
break;
case 3:
info = "NTSC / stereo";
btv->has_radio = 1;
btv->tda9887_conf = TDA9887_QSS;
break;
case 4:
info = "PAL+SECAM / mono";
btv->tda9887_conf = TDA9887_QSS;
break;
case 5:
info = "NTSC / mono";
btv->tda9887_conf = TDA9887_INTERCARRIER;
break;
case 6:
info = "NTSC / stereo";
btv->tda9887_conf = TDA9887_INTERCARRIER;
break;
case 7:
info = "PAL / stereo";
btv->tda9887_conf = TDA9887_INTERCARRIER;
break;
default:
info = "oops: unknown card";
break;
}
if (-1 != msp)
btv->c.type = BTTV_BOARD_PINNACLEPRO;
pr_info("%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
btv->tuner_type = TUNER_MT2032;
}
}
/* GPIO21 L: Buffer aktiv, H: Buffer inaktiv */
#define LM1882_SYNC_DRIVE 0x200000L
static void init_ids_eagle(struct bttv *btv)
{
gpio_inout(0xffffff,0xFFFF37);
gpio_write(0x200020);
/* flash strobe inverter ?! */
gpio_write(0x200024);
/* switch sync drive off */
gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
/* set BT848 muxel to 2 */
btaor((2)<<5, ~(2<<5), BT848_IFORM);
}
/* Muxsel helper for the IDS Eagle.
* the eagles does not use the standard muxsel-bits but
* has its own multiplexer */
static void eagle_muxsel(struct bttv *btv, unsigned int input)
{
gpio_bits(3, input & 3);
/* composite */
/* set chroma ADC to sleep */
btor(BT848_ADC_C_SLEEP, BT848_ADC);
/* set to composite video */
btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
/* switch sync drive off */
gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
}
static void gvc1100_muxsel(struct bttv *btv, unsigned int input)
{
static const int masks[] = {0x30, 0x01, 0x12, 0x23};
gpio_write(masks[input%4]);
}
/* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
alarms output
GPIObit | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1| | |
IN - sensor inputs, INx - sensor inputs and TI XORed together
O1,O2,O3 - alarm outputs (relays)
OUT ENABLE 1 1 0 . 1 1 0 0 . 0 0 0 0 = 0x6C0
*/
static void init_lmlbt4x(struct bttv *btv)
{
pr_debug("LMLBT4x init\n");
btwrite(0x000000, BT848_GPIO_REG_INP);
gpio_inout(0xffffff, 0x0006C0);
gpio_write(0x000000);
}
static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input)
{
unsigned int inmux = input % 8;
gpio_inout( 0xf, 0xf );
gpio_bits( 0xf, inmux );
}
static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input)
{
unsigned int inmux = input % 4;
gpio_inout( 3<<9, 3<<9 );
gpio_bits( 3<<9, inmux<<9 );
}
static void geovision_muxsel(struct bttv *btv, unsigned int input)
{
unsigned int inmux = input % 16;
gpio_inout(0xf, 0xf);
gpio_bits(0xf, inmux);
}
/*
* The TD3116 has 2 74HC4051 muxes wired to the MUX0 input of a bt878.
* The first 74HC4051 has the lower 8 inputs, the second one the higher 8.
* The muxes are controlled via a 74HC373 latch which is connected to
* GPIOs 0-7. GPIO 18 is connected to the LE signal of the latch.
* Q0 of the latch is connected to the Enable (~E) input of the first
* 74HC4051. Q1 - Q3 are connected to S0 - S2 of the same 74HC4051.
* Q4 - Q7 are connected to the second 74HC4051 in the same way.
*/
static void td3116_latch_value(struct bttv *btv, u32 value)
{
gpio_bits((1<<18) | 0xff, value);
gpio_bits((1<<18) | 0xff, (1<<18) | value);
udelay(1);
gpio_bits((1<<18) | 0xff, value);
}
static void td3116_muxsel(struct bttv *btv, unsigned int input)
{
u32 value;
u32 highbit;
highbit = (input & 0x8) >> 3 ;
/* Disable outputs and set value in the mux */
value = 0x11; /* Disable outputs */
value |= ((input & 0x7) << 1) << (4 * highbit);
td3116_latch_value(btv, value);
/* Enable the correct output */
value &= ~0x11;
value |= ((highbit ^ 0x1) << 4) | highbit;
td3116_latch_value(btv, value);
}
/* ----------------------------------------------------------------------- */
static void bttv_reset_audio(struct bttv *btv)
{
/*
* BT878A has a audio-reset register.
* 1. This register is an audio reset function but it is in
* function-0 (video capture) address space.
* 2. It is enough to do this once per power-up of the card.
* 3. There is a typo in the Conexant doc -- it is not at
* 0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
* --//Shrikumar 030609
*/
if (btv->id != 878)
return;
if (bttv_debug)
pr_debug("%d: BT878A ARESET\n", btv->c.nr);
btwrite((1<<7), 0x058);
udelay(10);
btwrite( 0, 0x058);
}
/* initialization part one -- before registering i2c bus */
void bttv_init_card1(struct bttv *btv)
{
switch (btv->c.type) {
case BTTV_BOARD_HAUPPAUGE:
case BTTV_BOARD_HAUPPAUGE878:
boot_msp34xx(btv,5);
break;
case BTTV_BOARD_VOODOOTV_200:
case BTTV_BOARD_VOODOOTV_FM:
boot_msp34xx(btv,20);
break;
case BTTV_BOARD_AVERMEDIA98:
boot_msp34xx(btv,11);
break;
case BTTV_BOARD_HAUPPAUGEPVR:
pvr_boot(btv);
break;
case BTTV_BOARD_TWINHAN_DST:
case BTTV_BOARD_AVDVBT_771:
case BTTV_BOARD_PINNACLESAT:
btv->use_i2c_hw = 1;
break;
case BTTV_BOARD_ADLINK_RTV24:
init_RTV24( btv );
break;
case BTTV_BOARD_PCI_8604PW:
init_PCI8604PW(btv);
break;
}
if (!bttv_tvcards[btv->c.type].has_dvb)
bttv_reset_audio(btv);
}
/* initialization part two -- after registering i2c bus */
void bttv_init_card2(struct bttv *btv)
{
btv->tuner_type = UNSET;
if (BTTV_BOARD_UNKNOWN == btv->c.type) {
bttv_readee(btv,eeprom_data,0xa0);
identify_by_eeprom(btv,eeprom_data);
}
switch (btv->c.type) {
case BTTV_BOARD_MIRO:
case BTTV_BOARD_MIROPRO:
case BTTV_BOARD_PINNACLE:
case BTTV_BOARD_PINNACLEPRO:
/* miro/pinnacle */
miro_pinnacle_gpio(btv);
break;
case BTTV_BOARD_FLYVIDEO_98:
case BTTV_BOARD_MAXI:
case BTTV_BOARD_LIFE_FLYKIT:
case BTTV_BOARD_FLYVIDEO:
case BTTV_BOARD_TYPHOON_TVIEW:
case BTTV_BOARD_CHRONOS_VS2:
case BTTV_BOARD_FLYVIDEO_98FM:
case BTTV_BOARD_FLYVIDEO2000:
case BTTV_BOARD_FLYVIDEO98EZ:
case BTTV_BOARD_CONFERENCETV:
case BTTV_BOARD_LIFETEC_9415:
flyvideo_gpio(btv);
break;
case BTTV_BOARD_HAUPPAUGE:
case BTTV_BOARD_HAUPPAUGE878:
case BTTV_BOARD_HAUPPAUGEPVR:
/* pick up some config infos from the eeprom */
bttv_readee(btv,eeprom_data,0xa0);
hauppauge_eeprom(btv);
break;
case BTTV_BOARD_AVERMEDIA98:
case BTTV_BOARD_AVPHONE98:
bttv_readee(btv,eeprom_data,0xa0);
avermedia_eeprom(btv);
break;
case BTTV_BOARD_PXC200:
init_PXC200(btv);
break;
case BTTV_BOARD_PICOLO_TETRA_CHIP:
picolo_tetra_init(btv);
break;
case BTTV_BOARD_VHX:
btv->has_radio = 1;
btv->has_tea575x = 1;
btv->tea_gpio.wren = 5;
btv->tea_gpio.most = 6;
btv->tea_gpio.clk = 3;
btv->tea_gpio.data = 4;
tea575x_init(btv);
break;
case BTTV_BOARD_VOBIS_BOOSTAR:
case BTTV_BOARD_TERRATV:
terratec_active_radio_upgrade(btv);
break;
case BTTV_BOARD_MAGICTVIEW061:
if (btv->cardid == 0x3002144f) {
btv->has_radio=1;
pr_info("%d: radio detected by subsystem id (CPH05x)\n",
btv->c.nr);
}
break;
case BTTV_BOARD_STB2:
if (btv->cardid == 0x3060121a) {
/* Fix up entry for 3DFX VoodooTV 100,
which is an OEM STB card variant. */
btv->has_radio=0;
btv->tuner_type=TUNER_TEMIC_NTSC;
}
break;
case BTTV_BOARD_OSPREY1x0:
case BTTV_BOARD_OSPREY1x0_848:
case BTTV_BOARD_OSPREY101_848:
case BTTV_BOARD_OSPREY1x1:
case BTTV_BOARD_OSPREY1x1_SVID:
case BTTV_BOARD_OSPREY2xx:
case BTTV_BOARD_OSPREY2x0_SVID:
case BTTV_BOARD_OSPREY2x0:
case BTTV_BOARD_OSPREY440:
case BTTV_BOARD_OSPREY500:
case BTTV_BOARD_OSPREY540:
case BTTV_BOARD_OSPREY2000:
bttv_readee(btv,eeprom_data,0xa0);
osprey_eeprom(btv, eeprom_data);
break;
case BTTV_BOARD_IDS_EAGLE:
init_ids_eagle(btv);
break;
case BTTV_BOARD_MODTEC_205:
bttv_readee(btv,eeprom_data,0xa0);
modtec_eeprom(btv);
break;
case BTTV_BOARD_LMLBT4:
init_lmlbt4x(btv);
break;
case BTTV_BOARD_TIBET_CS16:
tibetCS16_init(btv);
break;
case BTTV_BOARD_KODICOM_4400R:
kodicom4400r_init(btv);
break;
case BTTV_BOARD_GEOVISION_GV800S:
gv800s_init(btv);
break;
}
/* pll configuration */
if (!(btv->id==848 && btv->revision==0x11)) {
/* defaults from card list */
if (PLL_28 == bttv_tvcards[btv->c.type].pll) {
btv->pll.pll_ifreq=28636363;
btv->pll.pll_crystal=BT848_IFORM_XT0;
}
if (PLL_35 == bttv_tvcards[btv->c.type].pll) {
btv->pll.pll_ifreq=35468950;
btv->pll.pll_crystal=BT848_IFORM_XT1;
}
if (PLL_14 == bttv_tvcards[btv->c.type].pll) {
btv->pll.pll_ifreq = 14318181;
btv->pll.pll_crystal = BT848_IFORM_XT0;
}
/* insmod options can override */
switch (pll[btv->c.nr]) {
case 0: /* none */
btv->pll.pll_crystal = 0;
btv->pll.pll_ifreq = 0;
btv->pll.pll_ofreq = 0;
break;
case 1: /* 28 MHz */
case 28:
btv->pll.pll_ifreq = 28636363;
btv->pll.pll_ofreq = 0;
btv->pll.pll_crystal = BT848_IFORM_XT0;
break;
case 2: /* 35 MHz */
case 35:
btv->pll.pll_ifreq = 35468950;
btv->pll.pll_ofreq = 0;
btv->pll.pll_crystal = BT848_IFORM_XT1;
break;
case 3: /* 14 MHz */
case 14:
btv->pll.pll_ifreq = 14318181;
btv->pll.pll_ofreq = 0;
btv->pll.pll_crystal = BT848_IFORM_XT0;
break;
}
}
btv->pll.pll_current = -1;
/* tuner configuration (from card list / autodetect / insmod option) */
if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
if (UNSET == btv->tuner_type)
btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
if (UNSET != tuner[btv->c.nr])
btv->tuner_type = tuner[btv->c.nr];
if (btv->tuner_type == TUNER_ABSENT)
pr_info("%d: tuner absent\n", btv->c.nr);
else if (btv->tuner_type == UNSET)
pr_warn("%d: tuner type unset\n", btv->c.nr);
else
pr_info("%d: tuner type=%d\n", btv->c.nr, btv->tuner_type);
if (autoload != UNSET) {
pr_warn("%d: the autoload option is obsolete\n", btv->c.nr);
pr_warn("%d: use option msp3400, tda7432 or tvaudio to override which audio module should be used\n",
btv->c.nr);
}
if (UNSET == btv->tuner_type)
btv->tuner_type = TUNER_ABSENT;
btv->dig = bttv_tvcards[btv->c.type].has_dig_in ?
bttv_tvcards[btv->c.type].video_inputs - 1 : UNSET;
btv->svhs = bttv_tvcards[btv->c.type].svhs == NO_SVHS ?
UNSET : bttv_tvcards[btv->c.type].svhs;
if (svhs[btv->c.nr] != UNSET)
btv->svhs = svhs[btv->c.nr];
if (remote[btv->c.nr] != UNSET)
btv->has_remote = remote[btv->c.nr];
if (bttv_tvcards[btv->c.type].has_radio)
btv->has_radio = 1;
if (bttv_tvcards[btv->c.type].has_remote)
btv->has_remote = 1;
if (!bttv_tvcards[btv->c.type].no_gpioirq)
btv->gpioirq = 1;
if (bttv_tvcards[btv->c.type].volume_gpio)
btv->volume_gpio = bttv_tvcards[btv->c.type].volume_gpio;
if (bttv_tvcards[btv->c.type].audio_mode_gpio)
btv->audio_mode_gpio = bttv_tvcards[btv->c.type].audio_mode_gpio;
if (btv->tuner_type == TUNER_ABSENT)
return; /* no tuner or related drivers to load */
if (btv->has_saa6588 || saa6588[btv->c.nr]) {
/* Probe for RDS receiver chip */
static const unsigned short addrs[] = {
0x20 >> 1,
0x22 >> 1,
I2C_CLIENT_END
};
struct v4l2_subdev *sd;
sd = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
&btv->c.i2c_adap, "saa6588", 0, addrs);
btv->has_saa6588 = (sd != NULL);
}
/* try to detect audio/fader chips */
/* First check if the user specified the audio chip via a module
option. */
switch (audiodev[btv->c.nr]) {
case -1:
return; /* do not load any audio module */
case 0: /* autodetect */
break;
case 1: {
/* The user specified that we should probe for msp3400 */
static const unsigned short addrs[] = {
I2C_ADDR_MSP3400 >> 1,
I2C_ADDR_MSP3400_ALT >> 1,
I2C_CLIENT_END
};
btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
&btv->c.i2c_adap, "msp3400", 0, addrs);
if (btv->sd_msp34xx)
return;
goto no_audio;
}
case 2: {
/* The user specified that we should probe for tda7432 */
static const unsigned short addrs[] = {
I2C_ADDR_TDA7432 >> 1,
I2C_CLIENT_END
};
if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
&btv->c.i2c_adap, "tda7432", 0, addrs))
return;
goto no_audio;
}
case 3: {
/* The user specified that we should probe for tvaudio */
btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
&btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
if (btv->sd_tvaudio)
return;
goto no_audio;
}
default:
pr_warn("%d: unknown audiodev value!\n", btv->c.nr);
return;
}
/* There were no overrides, so now we try to discover this through the
card definition */
/* probe for msp3400 first: this driver can detect whether or not
it really is a msp3400, so it will return NULL when the device
found is really something else (e.g. a tea6300). */
if (!bttv_tvcards[btv->c.type].no_msp34xx) {
btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
&btv->c.i2c_adap, "msp3400",
0, I2C_ADDRS(I2C_ADDR_MSP3400 >> 1));
} else if (bttv_tvcards[btv->c.type].msp34xx_alt) {
btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
&btv->c.i2c_adap, "msp3400",
0, I2C_ADDRS(I2C_ADDR_MSP3400_ALT >> 1));
}
/* If we found a msp34xx, then we're done. */
if (btv->sd_msp34xx)
return;
/* Now see if we can find one of the tvaudio devices. */
btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
&btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
if (btv->sd_tvaudio) {
/* There may be two tvaudio chips on the card, so try to
find another. */
v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
&btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
}
/* it might also be a tda7432. */
if (!bttv_tvcards[btv->c.type].no_tda7432) {
static const unsigned short addrs[] = {
I2C_ADDR_TDA7432 >> 1,
I2C_CLIENT_END
};
btv->sd_tda7432 = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
&btv->c.i2c_adap, "tda7432", 0, addrs);
if (btv->sd_tda7432)
return;
}
if (btv->sd_tvaudio)
return;
no_audio:
pr_warn("%d: audio absent, no audio device found!\n", btv->c.nr);
}
/* initialize the tuner */
void bttv_init_tuner(struct bttv *btv)
{
int addr = ADDR_UNSET;
if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
addr = bttv_tvcards[btv->c.type].tuner_addr;
if (btv->tuner_type != TUNER_ABSENT) {
struct tuner_setup tun_setup;
/* Load tuner module before issuing tuner config call! */
if (btv->has_radio)
v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
&btv->c.i2c_adap, "tuner",
0, v4l2_i2c_tuner_addrs(ADDRS_RADIO));
v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
&btv->c.i2c_adap, "tuner",
0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
&btv->c.i2c_adap, "tuner",
0, v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
tun_setup.mode_mask = T_ANALOG_TV;
tun_setup.type = btv->tuner_type;
tun_setup.addr = addr;
if (btv->has_radio)
tun_setup.mode_mask |= T_RADIO;
bttv_call_all(btv, tuner, s_type_addr, &tun_setup);
}
if (btv->tda9887_conf) {
struct v4l2_priv_tun_config tda9887_cfg;
tda9887_cfg.tuner = TUNER_TDA9887;
tda9887_cfg.priv = &btv->tda9887_conf;
bttv_call_all(btv, tuner, s_config, &tda9887_cfg);
}
}
/* ----------------------------------------------------------------------- */
static void modtec_eeprom(struct bttv *btv)
{
if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
btv->c.nr, &eeprom_data[0x1e]);
} else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
btv->c.nr, &eeprom_data[0x1e]);
} else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
btv->tuner_type=TUNER_PHILIPS_NTSC;
pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
btv->c.nr, &eeprom_data[0x1e]);
} else {
pr_info("%d: Modtec: Unknown TunerString: %s\n",
btv->c.nr, &eeprom_data[0x1e]);
}
}
static void hauppauge_eeprom(struct bttv *btv)
{
struct tveeprom tv;
tveeprom_hauppauge_analog(&tv, eeprom_data);
btv->tuner_type = tv.tuner_type;
btv->has_radio = tv.has_radio;
pr_info("%d: Hauppauge eeprom indicates model#%d\n",
btv->c.nr, tv.model);
/*
* Some of the 878 boards have duplicate PCI IDs. Switch the board
* type based on model #.
*/
if(tv.model == 64900) {
pr_info("%d: Switching board type from %s to %s\n",
btv->c.nr,
bttv_tvcards[btv->c.type].name,
bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name);
btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB;
}
/* The 61334 needs the msp3410 to do the radio demod to get sound */
if (tv.model == 61334)
btv->radio_uses_msp_demodulator = 1;
}
/* ----------------------------------------------------------------------- */
static void bttv_tea575x_set_pins(struct snd_tea575x *tea, u8 pins)
{
struct bttv *btv = tea->private_data;
struct bttv_tea575x_gpio gpio = btv->tea_gpio;
u16 val = 0;
val |= (pins & TEA575X_DATA) ? (1 << gpio.data) : 0;
val |= (pins & TEA575X_CLK) ? (1 << gpio.clk) : 0;
val |= (pins & TEA575X_WREN) ? (1 << gpio.wren) : 0;
gpio_bits((1 << gpio.data) | (1 << gpio.clk) | (1 << gpio.wren), val);
if (btv->mbox_ior) {
/* IOW and CSEL active */
gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
udelay(5);
/* all inactive */
gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
}
}
static u8 bttv_tea575x_get_pins(struct snd_tea575x *tea)
{
struct bttv *btv = tea->private_data;
struct bttv_tea575x_gpio gpio = btv->tea_gpio;
u8 ret = 0;
u16 val;
if (btv->mbox_ior) {
/* IOR and CSEL active */
gpio_bits(btv->mbox_ior | btv->mbox_csel, 0);
udelay(5);
}
val = gpio_read();
if (btv->mbox_ior) {
/* all inactive */
gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
}
if (val & (1 << gpio.data))
ret |= TEA575X_DATA;
if (val & (1 << gpio.most))
ret |= TEA575X_MOST;
return ret;
}
static void bttv_tea575x_set_direction(struct snd_tea575x *tea, bool output)
{
struct bttv *btv = tea->private_data;
struct bttv_tea575x_gpio gpio = btv->tea_gpio;
u32 mask = (1 << gpio.clk) | (1 << gpio.wren) | (1 << gpio.data) |
(1 << gpio.most);
if (output)
gpio_inout(mask, (1 << gpio.data) | (1 << gpio.clk) |
(1 << gpio.wren));
else
gpio_inout(mask, (1 << gpio.clk) | (1 << gpio.wren));
}
static const struct snd_tea575x_ops bttv_tea_ops = {
.set_pins = bttv_tea575x_set_pins,
.get_pins = bttv_tea575x_get_pins,
.set_direction = bttv_tea575x_set_direction,
};
static int tea575x_init(struct bttv *btv)
{
btv->tea.private_data = btv;
btv->tea.ops = &bttv_tea_ops;
if (!snd_tea575x_hw_init(&btv->tea)) {
pr_info("%d: detected TEA575x radio\n", btv->c.nr);
btv->tea.mute = false;
return 0;
}
btv->has_tea575x = 0;
btv->has_radio = 0;
return -ENODEV;
}
/* ----------------------------------------------------------------------- */
static int terratec_active_radio_upgrade(struct bttv *btv)
{
btv->has_radio = 1;
btv->has_tea575x = 1;
btv->tea_gpio.wren = 4;
btv->tea_gpio.most = 5;
btv->tea_gpio.clk = 3;
btv->tea_gpio.data = 2;
btv->mbox_iow = 1 << 8;
btv->mbox_ior = 1 << 9;
btv->mbox_csel = 1 << 10;
if (!tea575x_init(btv)) {
pr_info("%d: Terratec Active Radio Upgrade found\n", btv->c.nr);
btv->has_saa6588 = 1;
}
return 0;
}
/* ----------------------------------------------------------------------- */
/*
* minimal bootstrap for the WinTV/PVR -- upload altera firmware.
*
* The hcwamc.rbf firmware file is on the Hauppauge driver CD. Have
* a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
* unpacked with unzip).
*/
#define PVR_GPIO_DELAY 10
#define BTTV_ALT_DATA 0x000001
#define BTTV_ALT_DCLK 0x100000
#define BTTV_ALT_NCONFIG 0x800000
static int pvr_altera_load(struct bttv *btv, const u8 *micro, u32 microlen)
{
u32 n;
u8 bits;
int i;
gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG);
gpio_write(0);
udelay(PVR_GPIO_DELAY);
gpio_write(BTTV_ALT_NCONFIG);
udelay(PVR_GPIO_DELAY);
for (n = 0; n < microlen; n++) {
bits = micro[n];
for (i = 0 ; i < 8 ; i++) {
gpio_bits(BTTV_ALT_DCLK,0);
if (bits & 0x01)
gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA);
else
gpio_bits(BTTV_ALT_DATA,0);
gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
bits >>= 1;
}
}
gpio_bits(BTTV_ALT_DCLK,0);
udelay(PVR_GPIO_DELAY);
/* begin Altera init loop (Not necessary,but doesn't hurt) */
for (i = 0 ; i < 30 ; i++) {
gpio_bits(BTTV_ALT_DCLK,0);
gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
}
gpio_bits(BTTV_ALT_DCLK,0);
return 0;
}
static int pvr_boot(struct bttv *btv)
{
const struct firmware *fw_entry;
int rc;
rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev);
if (rc != 0) {
pr_warn("%d: no altera firmware [via hotplug]\n", btv->c.nr);
return rc;
}
rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
pr_info("%d: altera firmware upload %s\n",
btv->c.nr, (rc < 0) ? "failed" : "ok");
release_firmware(fw_entry);
return rc;
}
/* ----------------------------------------------------------------------- */
/* some osprey specific stuff */
static void osprey_eeprom(struct bttv *btv, const u8 ee[256])
{
int i;
u32 serial = 0;
int cardid = -1;
/* This code will never actually get called in this case.... */
if (btv->c.type == BTTV_BOARD_UNKNOWN) {
/* this might be an antique... check for MMAC label in eeprom */
if (!strncmp(ee, "MMAC", 4)) {
u8 checksum = 0;
for (i = 0; i < 21; i++)
checksum += ee[i];
if (checksum != ee[21])
return;
cardid = BTTV_BOARD_OSPREY1x0_848;
for (i = 12; i < 21; i++) {
serial *= 10;
serial += ee[i] - '0';
}
}
} else {
unsigned short type;
for (i = 4 * 16; i < 8 * 16; i += 16) {
u16 checksum = (__force u16)ip_compute_csum(ee + i, 16);
if ((checksum & 0xff) + (checksum >> 8) == 0xff)
break;
}
if (i >= 8*16)
return;
ee += i;
/* found a valid descriptor */
type = get_unaligned_be16((__be16 *)(ee+4));
switch(type) {
/* 848 based */
case 0x0004:
cardid = BTTV_BOARD_OSPREY1x0_848;
break;
case 0x0005:
cardid = BTTV_BOARD_OSPREY101_848;
break;
/* 878 based */
case 0x0012:
case 0x0013:
cardid = BTTV_BOARD_OSPREY1x0;
break;
case 0x0014:
case 0x0015:
cardid = BTTV_BOARD_OSPREY1x1;
break;
case 0x0016:
case 0x0017:
case 0x0020:
cardid = BTTV_BOARD_OSPREY1x1_SVID;
break;
case 0x0018:
case 0x0019:
case 0x001E:
case 0x001F:
cardid = BTTV_BOARD_OSPREY2xx;
break;
case 0x001A:
case 0x001B:
cardid = BTTV_BOARD_OSPREY2x0_SVID;
break;
case 0x0040:
cardid = BTTV_BOARD_OSPREY500;
break;
case 0x0050:
case 0x0056:
cardid = BTTV_BOARD_OSPREY540;
/* bttv_osprey_540_init(btv); */
break;
case 0x0060:
case 0x0070:
case 0x00A0:
cardid = BTTV_BOARD_OSPREY2x0;
/* enable output on select control lines */
gpio_inout(0xffffff,0x000303);
break;
case 0x00D8:
cardid = BTTV_BOARD_OSPREY440;
break;
default:
/* unknown...leave generic, but get serial # */
pr_info("%d: osprey eeprom: unknown card type 0x%04x\n",
btv->c.nr, type);
break;
}
serial = get_unaligned_be32((__be32 *)(ee+6));
}
pr_info("%d: osprey eeprom: card=%d '%s' serial=%u\n",
btv->c.nr, cardid,
cardid > 0 ? bttv_tvcards[cardid].name : "Unknown", serial);
if (cardid<0 || btv->c.type == cardid)
return;
/* card type isn't set correctly */
if (card[btv->c.nr] < bttv_num_tvcards) {
pr_warn("%d: osprey eeprom: Not overriding user specified card type\n",
btv->c.nr);
} else {
pr_info("%d: osprey eeprom: Changing card type from %d to %d\n",
btv->c.nr, btv->c.type, cardid);
btv->c.type = cardid;
}
}
/* ----------------------------------------------------------------------- */
/* AVermedia specific stuff, from bktr_card.c */
static int tuner_0_table[] = {
TUNER_PHILIPS_NTSC, TUNER_PHILIPS_PAL /* PAL-BG*/,
TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL /* PAL-I*/,
TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL,
TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL,
TUNER_PHILIPS_FM1216ME_MK3 };
static int tuner_1_table[] = {
TUNER_TEMIC_NTSC, TUNER_TEMIC_PAL,
TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */
TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
static void avermedia_eeprom(struct bttv *btv)
{
int tuner_make, tuner_tv_fm, tuner_format, tuner_type = 0;
tuner_make = (eeprom_data[0x41] & 0x7);
tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3;
tuner_format = (eeprom_data[0x42] & 0xf0) >> 4;
btv->has_remote = (eeprom_data[0x42] & 0x01);
if (tuner_make == 0 || tuner_make == 2)
if (tuner_format <= 0x0a)
tuner_type = tuner_0_table[tuner_format];
if (tuner_make == 1)
if (tuner_format <= 9)
tuner_type = tuner_1_table[tuner_format];
if (tuner_make == 4)
if (tuner_format == 0x09)
tuner_type = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
pr_info("%d: Avermedia eeprom[0x%02x%02x]: tuner=",
btv->c.nr, eeprom_data[0x41], eeprom_data[0x42]);
if (tuner_type) {
btv->tuner_type = tuner_type;
pr_cont("%d", tuner_type);
} else
pr_cont("Unknown type");
pr_cont(" radio:%s remote control:%s\n",
tuner_tv_fm ? "yes" : "no",
btv->has_remote ? "yes" : "no");
}
/*
* For Voodoo TV/FM and Voodoo 200. These cards' tuners use a TDA9880
* analog demod, which is not I2C controlled like the newer and more common
* TDA9887 series. Instead it has two tri-state input pins, S0 and S1,
* that control the IF for the video and audio. Apparently, bttv GPIO
* 0x10000 is connected to S0. S0 low selects a 38.9 MHz VIF for B/G/D/K/I
* (i.e., PAL) while high selects 45.75 MHz for M/N (i.e., NTSC).
*/
u32 bttv_tda9880_setnorm(struct bttv *btv, u32 gpiobits)
{
if (btv->audio_input == TVAUDIO_INPUT_TUNER) {
if (bttv_tvnorms[btv->tvnorm].v4l2_id & V4L2_STD_MN)
gpiobits |= 0x10000;
else
gpiobits &= ~0x10000;
}
gpio_bits(bttv_tvcards[btv->c.type].gpiomask, gpiobits);
return gpiobits;
}
/*
* reset/enable the MSP on some Hauppauge cards
* Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)!
*
* Hauppauge: pin 5
* Voodoo: pin 20
*/
static void boot_msp34xx(struct bttv *btv, int pin)
{
int mask = (1 << pin);
gpio_inout(mask,mask);
gpio_bits(mask,0);
mdelay(2);
udelay(500);
gpio_bits(mask,mask);
if (bttv_gpio)
bttv_gpio_tracking(btv,"msp34xx");
if (bttv_verbose)
pr_info("%d: Hauppauge/Voodoo msp34xx: reset line init [%d]\n",
btv->c.nr, pin);
}
/* ----------------------------------------------------------------------- */
/* Imagenation L-Model PXC200 Framegrabber */
/* This is basically the same procedure as
* used by Alessandro Rubini in his pxc200
* driver, but using BTTV functions */
static void init_PXC200(struct bttv *btv)
{
static int vals[] = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d, 0x01, 0x02,
0x03, 0x04, 0x05, 0x06, 0x00 };
unsigned int i;
int tmp;
u32 val;
/* Initialise GPIO-connected stuff */
gpio_inout(0xffffff, (1<<13));
gpio_write(0);
udelay(3);
gpio_write(1<<13);
/* GPIO inputs are pulled up, so no need to drive
* reset pin any longer */
gpio_bits(0xffffff, 0);
if (bttv_gpio)
bttv_gpio_tracking(btv,"pxc200");
/* we could/should try and reset/control the AD pots? but
right now we simply turned off the crushing. Without
this the AGC drifts drifts
remember the EN is reverse logic -->
setting BT848_ADC_AGC_EN disable the AGC
tboult@eecs.lehigh.edu
*/
btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);
/* Initialise MAX517 DAC */
pr_info("Setting DAC reference voltage level ...\n");
bttv_I2CWrite(btv,0x5E,0,0x80,1);
/* Initialise 12C508 PIC */
/* The I2CWrite and I2CRead commands are actually to the
* same chips - but the R/W bit is included in the address
* argument so the numbers are different */
pr_info("Initialising 12C508 PIC chip ...\n");
/* First of all, enable the clock line. This is used in the PXC200-F */
val = btread(BT848_GPIO_DMA_CTL);
val |= BT848_GPIO_DMA_CTL_GPCLKMODE;
btwrite(val, BT848_GPIO_DMA_CTL);
/* Then, push to 0 the reset pin long enough to reset the *
* device same as above for the reset line, but not the same
* value sent to the GPIO-connected stuff
* which one is the good one? */
gpio_inout(0xffffff,(1<<2));
gpio_write(0);
udelay(10);
gpio_write(1<<2);
for (i = 0; i < ARRAY_SIZE(vals); i++) {
tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
if (tmp != -1) {
pr_info("I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
}
}
pr_info("PXC200 Initialised\n");
}
/* ----------------------------------------------------------------------- */
/*
* The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock
* it. This apparently involves the following procedure for each 878 chip:
*
* 1) write 0x00C3FEFF to the GPIO_OUT_EN register
*
* 2) write to GPIO_DATA
* - 0x0E
* - sleep 1ms
* - 0x10 + 0x0E
* - sleep 10ms
* - 0x0E
* read from GPIO_DATA into buf (uint_32)
* - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 )
* error. ERROR_CPLD_Check_Failed stop.
*
* 3) write to GPIO_DATA
* - write 0x4400 + 0x0E
* - sleep 10ms
* - write 0x4410 + 0x0E
* - sleep 1ms
* - write 0x0E
* read from GPIO_DATA into buf (uint_32)
* - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 )
* error. ERROR_CPLD_Check_Failed.
*/
/* ----------------------------------------------------------------------- */
static void
init_RTV24 (struct bttv *btv)
{
uint32_t dataRead = 0;
long watchdog_value = 0x0E;
pr_info("%d: Adlink RTV-24 initialisation in progress ...\n",
btv->c.nr);
btwrite (0x00c3feff, BT848_GPIO_OUT_EN);
btwrite (0 + watchdog_value, BT848_GPIO_DATA);
msleep (1);
btwrite (0x10 + watchdog_value, BT848_GPIO_DATA);
msleep (10);
btwrite (0 + watchdog_value, BT848_GPIO_DATA);
dataRead = btread (BT848_GPIO_DATA);
if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) {
pr_info("%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
btv->c.nr, dataRead);
}
btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA);
msleep (10);
btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA);
msleep (1);
btwrite (watchdog_value, BT848_GPIO_DATA);
msleep (1);
dataRead = btread (BT848_GPIO_DATA);
if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) {
pr_info("%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
btv->c.nr, dataRead);
return;
}
pr_info("%d: Adlink RTV-24 initialisation complete\n", btv->c.nr);
}
/* ----------------------------------------------------------------------- */
/*
* The PCI-8604PW contains a CPLD, probably an ispMACH 4A, that filters
* the PCI REQ signals coming from the four BT878 chips. After power
* up, the CPLD does not forward requests to the bus, which prevents
* the BT878 from fetching RISC instructions from memory. While the
* CPLD is connected to most of the GPIOs of PCI device 0xD, only
* five appear to play a role in unlocking the REQ signal. The following
* sequence has been determined by trial and error without access to the
* original driver.
*
* Eight GPIOs of device 0xC are provided on connector CN4 (4 in, 4 out).
* Devices 0xE and 0xF do not appear to have anything connected to their
* GPIOs.
*
* The correct GPIO_OUT_EN value might have some more bits set. It should
* be possible to derive it from a boundary scan of the CPLD. Its JTAG
* pins are routed to test points.
*
*/
/* ----------------------------------------------------------------------- */
static void
init_PCI8604PW(struct bttv *btv)
{
int state;
if ((PCI_SLOT(btv->c.pci->devfn) & ~3) != 0xC) {
pr_warn("This is not a PCI-8604PW\n");
return;
}
if (PCI_SLOT(btv->c.pci->devfn) != 0xD)
return;
btwrite(0x080002, BT848_GPIO_OUT_EN);
state = (btread(BT848_GPIO_DATA) >> 21) & 7;
for (;;) {
switch (state) {
case 1:
case 5:
case 6:
case 4:
pr_debug("PCI-8604PW in state %i, toggling pin\n",
state);
btwrite(0x080000, BT848_GPIO_DATA);
msleep(1);
btwrite(0x000000, BT848_GPIO_DATA);
msleep(1);
break;
case 7:
pr_info("PCI-8604PW unlocked\n");
return;
case 0:
/* FIXME: If we are in state 7 and toggle GPIO[19] one
more time, the CPLD goes into state 0, where PCI bus
mastering is inhibited again. We have not managed to
get out of that state. */
pr_err("PCI-8604PW locked until reset\n");
return;
default:
pr_err("PCI-8604PW in unknown state %i\n", state);
return;
}
state = (state << 4) | ((btread(BT848_GPIO_DATA) >> 21) & 7);
switch (state) {
case 0x15:
case 0x56:
case 0x64:
case 0x47:
/* The transition from state 7 to state 0 is, as explained
above, valid but undesired and with this code impossible
as we exit as soon as we are in state 7.
case 0x70: */
break;
default:
pr_err("PCI-8604PW invalid transition %i -> %i\n",
state >> 4, state & 7);
return;
}
state &= 7;
}
}
/* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
*
* This is needed because rv605 don't use a normal multiplex, but a crosspoint
* switch instead (CD22M3494E). This IC can have multiple active connections
* between Xn (input) and Yn (output) pins. We need to clear any existing
* connection prior to establish a new one, pulsing the STROBE pin.
*
* The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
* GPIO pins are wired as:
* GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroller)
* GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroller)
* GPIO[7] - DATA (xpoint) - P1[7] (microcontroller)
* GPIO[8] - - P3[5] (microcontroller)
* GPIO[9] - RESET (xpoint) - P3[6] (microcontroller)
* GPIO[10] - STROBE (xpoint) - P3[7] (microcontroller)
* GPINTR - - P3[4] (microcontroller)
*
* The microcontroller is a 80C32 like. It should be possible to change xpoint
* configuration either directly (as we are doing) or using the microcontroller
* which is also wired to I2C interface. I have no further info on the
* microcontroller features, one would need to disassembly the firmware.
* note: the vendor refused to give any information on this product, all
* that stuff was found using a multimeter! :)
*/
static void rv605_muxsel(struct bttv *btv, unsigned int input)
{
static const u8 muxgpio[] = { 0x3, 0x1, 0x2, 0x4, 0xf, 0x7, 0xe, 0x0,
0xd, 0xb, 0xc, 0x6, 0x9, 0x5, 0x8, 0xa };
gpio_bits(0x07f, muxgpio[input]);
/* reset all connections */
gpio_bits(0x200,0x200);
mdelay(1);
gpio_bits(0x200,0x000);
mdelay(1);
/* create a new connection */
gpio_bits(0x480,0x480);
mdelay(1);
gpio_bits(0x480,0x080);
mdelay(1);
}
/* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
*
* The CS16 (available on eBay cheap) is a PCI board with four Fusion
* 878A chips, a PCI bridge, an Atmel microcontroller, four sync separator
* chips, ten eight input analog multiplexors, a not chip and a few
* other components.
*
* 16 inputs on a secondary bracket are provided and can be selected
* from each of the four capture chips. Two of the eight input
* multiplexors are used to select from any of the 16 input signals.
*
* Unsupported hardware capabilities:
* . A video output monitor on the secondary bracket can be selected from
* one of the 878A chips.
* . Another passthrough but I haven't spent any time investigating it.
* . Digital I/O (logic level connected to GPIO) is available from an
* onboard header.
*
* The on chip input mux should always be set to 2.
* GPIO[16:19] - Video input selection
* GPIO[0:3] - Video output monitor select (only available from one 878A)
* GPIO[?:?] - Digital I/O.
*
* There is an ATMEL microcontroller with an 8031 core on board. I have not
* determined what function (if any) it provides. With the microcontroller
* and sync separator chips a guess is that it might have to do with video
* switching and maybe some digital I/O.
*/
static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
{
/* video mux */
gpio_bits(0x0f0000, input << 16);
}
static void tibetCS16_init(struct bttv *btv)
{
/* enable gpio bits, mask obtained via btSpy */
gpio_inout(0xffffff, 0x0f7fff);
gpio_write(0x0f7fff);
}
/*
* The following routines for the Kodicom-4400r get a little mind-twisting.
* There is a "master" controller and three "slave" controllers, together
* an analog switch which connects any of 16 cameras to any of the BT87A's.
* The analog switch is controlled by the "master", but the detection order
* of the four BT878A chips is in an order which I just don't understand.
* The "master" is actually the second controller to be detected. The
* logic on the board uses logical numbers for the 4 controllers, but
* those numbers are different from the detection sequence. When working
* with the analog switch, we need to "map" from the detection sequence
* over to the board's logical controller number. This mapping sequence
* is {3, 0, 2, 1}, i.e. the first controller to be detected is logical
* unit 3, the second (which is the master) is logical unit 0, etc.
* We need to maintain the status of the analog switch (which of the 16
* cameras is connected to which of the 4 controllers) in sw_status array.
*/
/*
* First a routine to set the analog switch, which controls which camera
* is routed to which controller. The switch comprises an X-address
* (gpio bits 0-3, representing the camera, ranging from 0-15), and a
* Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
* A data value (gpio bit 7) of '1' enables the switch, and '0' disables
* the switch. A STROBE bit (gpio bit 8) latches the data value into the
* specified address. The idea is to set the address and data, then bring
* STROBE high, and finally bring STROBE back to low.
*/
static void kodicom4400r_write(struct bttv *btv,
unsigned char xaddr,
unsigned char yaddr,
unsigned char data) {
unsigned int udata;
udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf);
gpio_bits(0x1ff, udata); /* write ADDR and DAT */
gpio_bits(0x1ff, udata | (1 << 8)); /* strobe high */
gpio_bits(0x1ff, udata); /* strobe low */
}
/*
* Next the mux select. Both the "master" and "slave" 'cards' (controllers)
* use this routine. The routine finds the "master" for the card, maps
* the controller number from the detected position over to the logical
* number, writes the appropriate data to the analog switch, and housekeeps
* the local copy of the switch information. The parameter 'input' is the
* requested camera number (0 - 15).
*/
static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input)
{
int xaddr, yaddr;
struct bttv *mctlr;
static unsigned char map[4] = {3, 0, 2, 1};
mctlr = master[btv->c.nr];
if (mctlr == NULL) { /* ignore if master not yet detected */
return;
}
yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */
yaddr = map[yaddr];
xaddr = input & 0xf;
/* Check if the controller/camera pair has changed, else ignore */
if (mctlr->sw_status[yaddr] != xaddr)
{
/* "open" the old switch, "close" the new one, save the new */
kodicom4400r_write(mctlr, mctlr->sw_status[yaddr], yaddr, 0);
mctlr->sw_status[yaddr] = xaddr;
kodicom4400r_write(mctlr, xaddr, yaddr, 1);
}
}
/*
* During initialisation, we need to reset the analog switch. We
* also preset the switch to map the 4 connectors on the card to the
* *user's* (see above description of kodicom4400r_muxsel) channels
* 0 through 3
*/
static void kodicom4400r_init(struct bttv *btv)
{
int ix;
gpio_inout(0x0003ff, 0x0003ff);
gpio_write(1 << 9); /* reset MUX */
gpio_write(0);
/* Preset camera 0 to the 4 controllers */
for (ix = 0; ix < 4; ix++) {
btv->sw_status[ix] = ix;
kodicom4400r_write(btv, ix, ix, 1);
}
/*
* Since this is the "master", we need to set up the
* other three controller chips' pointers to this structure
* for later use in the muxsel routine.
*/
if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3))
return;
master[btv->c.nr-1] = btv;
master[btv->c.nr] = btv;
master[btv->c.nr+1] = btv;
master[btv->c.nr+2] = btv;
}
/* The Grandtec X-Guard framegrabber card uses two Dual 4-channel
* video multiplexers to provide up to 16 video inputs. These
* multiplexers are controlled by the lower 8 GPIO pins of the
* bt878. The multiplexers probably Pericom PI5V331Q or similar.
* xxx0 is pin xxx of multiplexer U5,
* yyy1 is pin yyy of multiplexer U2
*/
#define ENA0 0x01
#define ENB0 0x02
#define ENA1 0x04
#define ENB1 0x08
#define IN10 0x10
#define IN00 0x20
#define IN11 0x40
#define IN01 0x80
static void xguard_muxsel(struct bttv *btv, unsigned int input)
{
static const int masks[] = {
ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10,
ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10,
ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11,
ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11,
};
gpio_write(masks[input%16]);
}
static void picolo_tetra_init(struct bttv *btv)
{
/*This is the video input redirection functionality : I DID NOT USE IT. */
btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */
btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A] set to 1*/
}
static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
{
dprintk("%d : picolo_tetra_muxsel => input = %d\n", btv->c.nr, input);
/*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
/*GPIO[20]&GPIO[21] used to choose the right input*/
btwrite (input<<20,BT848_GPIO_DATA);
}
/*
* ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
*
* The IVC120G security card has 4 i2c controlled TDA8540 matrix
* switchers to provide 16 channels to MUX0. The TDA8540's have
* 4 independent outputs and as such the IVC120G also has the
* optional "Monitor Out" bus. This allows the card to be looking
* at one input while the monitor is looking at another.
*
* Since I've couldn't be bothered figuring out how to add an
* independent muxsel for the monitor bus, I've just set it to
* whatever the card is looking at.
*
* OUT0 of the TDA8540's is connected to MUX0 (0x03)
* OUT1 of the TDA8540's is connected to "Monitor Out" (0x0C)
*
* TDA8540_ALT3 IN0-3 = Channel 13 - 16 (0x03)
* TDA8540_ALT4 IN0-3 = Channel 1 - 4 (0x03)
* TDA8540_ALT5 IN0-3 = Channel 5 - 8 (0x03)
* TDA8540_ALT6 IN0-3 = Channel 9 - 12 (0x03)
*
*/
/* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
#define I2C_TDA8540 0x90
#define I2C_TDA8540_ALT1 0x92
#define I2C_TDA8540_ALT2 0x94
#define I2C_TDA8540_ALT3 0x96
#define I2C_TDA8540_ALT4 0x98
#define I2C_TDA8540_ALT5 0x9a
#define I2C_TDA8540_ALT6 0x9c
static void ivc120_muxsel(struct bttv *btv, unsigned int input)
{
/* Simple maths */
int key = input % 4;
int matrix = input / 4;
dprintk("%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
btv->c.nr, input, matrix, key);
/* Handles the input selection on the TDA8540's */
bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00,
((matrix == 3) ? (key | key << 2) : 0x00), 1);
bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00,
((matrix == 0) ? (key | key << 2) : 0x00), 1);
bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00,
((matrix == 1) ? (key | key << 2) : 0x00), 1);
bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00,
((matrix == 2) ? (key | key << 2) : 0x00), 1);
/* Handles the output enables on the TDA8540's */
bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02,
((matrix == 3) ? 0x03 : 0x00), 1); /* 13 - 16 */
bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02,
((matrix == 0) ? 0x03 : 0x00), 1); /* 1-4 */
bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02,
((matrix == 1) ? 0x03 : 0x00), 1); /* 5-8 */
bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
((matrix == 2) ? 0x03 : 0x00), 1); /* 9-12 */
/* 878's MUX0 is already selected for input via muxsel values */
}
/* PXC200 muxsel helper
* luke@syseng.anu.edu.au
* another transplant
* from Alessandro Rubini (rubini@linux.it)
*
* There are 4 kinds of cards:
* PXC200L which is bt848
* PXC200F which is bt848 with PIC controlling mux
* PXC200AL which is bt878
* PXC200AF which is bt878 with PIC controlling mux
*/
#define PX_CFG_PXC200F 0x01
#define PX_FLAG_PXC200A 0x00001000 /* a pxc200A is bt-878 based */
#define PX_I2C_PIC 0x0f
#define PX_PXC200A_CARDID 0x200a1295
#define PX_I2C_CMD_CFG 0x00
static void PXC200_muxsel(struct bttv *btv, unsigned int input)
{
int rc;
long mux;
int bitmask;
unsigned char buf[2];
/* Read PIC config to determine if this is a PXC200F */
/* PX_I2C_CMD_CFG*/
buf[0]=0;
buf[1]=0;
rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1);
if (rc) {
pr_debug("%d: PXC200_muxsel: pic cfg write failed:%d\n",
btv->c.nr, rc);
/* not PXC ? do nothing */
return;
}
rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL);
if (!(rc & PX_CFG_PXC200F)) {
pr_debug("%d: PXC200_muxsel: not PXC200F rc:%d\n",
btv->c.nr, rc);
return;
}
/* The multiplexer in the 200F is handled by the GPIO port */
/* get correct mapping between inputs */
/* mux = bttv_tvcards[btv->type].muxsel[input] & 3; */
/* ** not needed!? */
mux = input;
/* make sure output pins are enabled */
/* bitmask=0x30f; */
bitmask=0x302;
/* check whether we have a PXC200A */
if (btv->cardid == PX_PXC200A_CARDID) {
bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */
bitmask |= 7<<4; /* the DAC */
}
btwrite(bitmask, BT848_GPIO_OUT_EN);
bitmask = btread(BT848_GPIO_DATA);
if (btv->cardid == PX_PXC200A_CARDID)
bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7);
else /* older device */
bitmask = (bitmask & ~0x300) | ((mux & 3) << 8);
btwrite(bitmask,BT848_GPIO_DATA);
/*
* Was "to be safe, set the bt848 to input 0"
* Actually, since it's ok at load time, better not messing
* with these bits (on PXC200AF you need to set mux 2 here)
*
* needed because bttv-driver sets mux before calling this function
*/
if (btv->cardid == PX_PXC200A_CARDID)
btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM);
else /* older device */
btand(~BT848_IFORM_MUXSEL,BT848_IFORM);
pr_debug("%d: setting input channel to:%d\n", btv->c.nr, (int)mux);
}
static void phytec_muxsel(struct bttv *btv, unsigned int input)
{
unsigned int mux = input % 4;
if (input == btv->svhs)
mux = 0;
gpio_bits(0x3, mux);
}
/*
* GeoVision GV-800(S) functions
* Bruno Christo <bchristo@inf.ufsm.br>
*/
/* This is a function to control the analog switch, which determines which
* camera is routed to which controller. The switch comprises an X-address
* (gpio bits 0-3, representing the camera, ranging from 0-15), and a
* Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
* A data value (gpio bit 18) of '1' enables the switch, and '0' disables
* the switch. A STROBE bit (gpio bit 17) latches the data value into the
* specified address. There is also a chip select (gpio bit 16).
* The idea is to set the address and chip select together, bring
* STROBE high, write the data, and finally bring STROBE back to low.
*/
static void gv800s_write(struct bttv *btv,
unsigned char xaddr,
unsigned char yaddr,
unsigned char data) {
/* On the "master" 878A:
* GPIO bits 0-9 are used for the analog switch:
* 00 - 03: camera selector
* 04 - 06: 878A (controller) selector
* 16: cselect
* 17: strobe
* 18: data (1->on, 0->off)
* 19: reset
*/
const u32 ADDRESS = ((xaddr&0xf) | (yaddr&3)<<4);
const u32 CSELECT = 1<<16;
const u32 STROBE = 1<<17;
const u32 DATA = data<<18;
gpio_bits(0x1007f, ADDRESS | CSELECT); /* write ADDRESS and CSELECT */
gpio_bits(0x20000, STROBE); /* STROBE high */
gpio_bits(0x40000, DATA); /* write DATA */
gpio_bits(0x20000, ~STROBE); /* STROBE low */
}
/*
* GeoVision GV-800(S) muxsel
*
* Each of the 4 cards (controllers) use this function.
* The controller using this function selects the input through the GPIO pins
* of the "master" card. A pointer to this card is stored in master[btv->c.nr].
*
* The parameter 'input' is the requested camera number (0-4) on the controller.
* The map array has the address of each input. Note that the addresses in the
* array are in the sequence the original GeoVision driver uses, that is, set
* every controller to input 0, then to input 1, 2, 3, repeat. This means that
* the physical "camera 1" connector corresponds to controller 0 input 0,
* "camera 2" corresponds to controller 1 input 0, and so on.
*
* After getting the input address, the function then writes the appropriate
* data to the analog switch, and housekeeps the local copy of the switch
* information.
*/
static void gv800s_muxsel(struct bttv *btv, unsigned int input)
{
struct bttv *mctlr;
int xaddr, yaddr;
static unsigned int map[4][4] = { { 0x0, 0x4, 0xa, 0x6 },
{ 0x1, 0x5, 0xb, 0x7 },
{ 0x2, 0x8, 0xc, 0xe },
{ 0x3, 0x9, 0xd, 0xf } };
input = input%4;
mctlr = master[btv->c.nr];
if (mctlr == NULL) {
/* do nothing until the "master" is detected */
return;
}
yaddr = (btv->c.nr - mctlr->c.nr) & 3;
xaddr = map[yaddr][input] & 0xf;
/* Check if the controller/camera pair has changed, ignore otherwise */
if (mctlr->sw_status[yaddr] != xaddr) {
/* disable the old switch, enable the new one and save status */
gv800s_write(mctlr, mctlr->sw_status[yaddr], yaddr, 0);
mctlr->sw_status[yaddr] = xaddr;
gv800s_write(mctlr, xaddr, yaddr, 1);
}
}
/* GeoVision GV-800(S) "master" chip init */
static void gv800s_init(struct bttv *btv)
{
int ix;
gpio_inout(0xf107f, 0xf107f);
gpio_write(1<<19); /* reset the analog MUX */
gpio_write(0);
/* Preset camera 0 to the 4 controllers */
for (ix = 0; ix < 4; ix++) {
btv->sw_status[ix] = ix;
gv800s_write(btv, ix, ix, 1);
}
/* Inputs on the "master" controller need this brightness fix */
bttv_I2CWrite(btv, 0x18, 0x5, 0x90, 1);
if (btv->c.nr > BTTV_MAX-4)
return;
/*
* Store the "master" controller pointer in the master
* array for later use in the muxsel function.
*/
master[btv->c.nr] = btv;
master[btv->c.nr+1] = btv;
master[btv->c.nr+2] = btv;
master[btv->c.nr+3] = btv;
}
/* ----------------------------------------------------------------------- */
/* motherboard chipset specific stuff */
void __init bttv_check_chipset(void)
{
struct pci_dev *dev = NULL;
if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF))
triton1 = 1;
if (pci_pci_problems & PCIPCI_VSFX)
vsfx = 1;
#ifdef PCIPCI_ALIMAGIK
if (pci_pci_problems & PCIPCI_ALIMAGIK)
latency = 0x0A;
#endif
/* print warnings about any quirks found */
if (triton1)
pr_info("Host bridge needs ETBF enabled\n");
if (vsfx)
pr_info("Host bridge needs VSFX enabled\n");
if (UNSET != latency)
pr_info("pci latency fixup [%d]\n", latency);
while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_82441, dev))) {
unsigned char b;
pci_read_config_byte(dev, 0x53, &b);
if (bttv_debug)
pr_info("Host bridge: 82441FX Natoma, bufcon=0x%02x\n",
b);
}
}
int bttv_handle_chipset(struct bttv *btv)
{
unsigned char command;
if (!triton1 && !vsfx && UNSET == latency)
return 0;
if (bttv_verbose) {
if (triton1)
pr_info("%d: enabling ETBF (430FX/VP3 compatibility)\n",
btv->c.nr);
if (vsfx && btv->id >= 878)
pr_info("%d: enabling VSFX\n", btv->c.nr);
if (UNSET != latency)
pr_info("%d: setting pci timer to %d\n",
btv->c.nr, latency);
}
if (btv->id < 878) {
/* bt848 (mis)uses a bit in the irq mask for etbf */
if (triton1)
btv->triton1 = BT848_INT_ETBF;
} else {
/* bt878 has a bit in the pci config space for it */
pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command);
if (triton1)
command |= BT878_EN_TBFX;
if (vsfx)
command |= BT878_EN_VSFX;
pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command);
}
if (UNSET != latency)
pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency);
return 0;
}