| /* SPDX-License-Identifier: GPL-2.0 */ |
| #ifndef _ARCH_POWERPC_UACCESS_H |
| #define _ARCH_POWERPC_UACCESS_H |
| |
| #include <asm/ppc_asm.h> |
| #include <asm/processor.h> |
| #include <asm/page.h> |
| #include <asm/extable.h> |
| #include <asm/kup.h> |
| |
| /* |
| * The fs value determines whether argument validity checking should be |
| * performed or not. If get_fs() == USER_DS, checking is performed, with |
| * get_fs() == KERNEL_DS, checking is bypassed. |
| * |
| * For historical reasons, these macros are grossly misnamed. |
| * |
| * The fs/ds values are now the highest legal address in the "segment". |
| * This simplifies the checking in the routines below. |
| */ |
| |
| #define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) |
| |
| #define KERNEL_DS MAKE_MM_SEG(~0UL) |
| #ifdef __powerpc64__ |
| /* We use TASK_SIZE_USER64 as TASK_SIZE is not constant */ |
| #define USER_DS MAKE_MM_SEG(TASK_SIZE_USER64 - 1) |
| #else |
| #define USER_DS MAKE_MM_SEG(TASK_SIZE - 1) |
| #endif |
| |
| #define get_fs() (current->thread.addr_limit) |
| |
| static inline void set_fs(mm_segment_t fs) |
| { |
| current->thread.addr_limit = fs; |
| /* On user-mode return check addr_limit (fs) is correct */ |
| set_thread_flag(TIF_FSCHECK); |
| } |
| |
| #define uaccess_kernel() (get_fs().seg == KERNEL_DS.seg) |
| #define user_addr_max() (get_fs().seg) |
| |
| #ifdef __powerpc64__ |
| /* |
| * This check is sufficient because there is a large enough |
| * gap between user addresses and the kernel addresses |
| */ |
| #define __access_ok(addr, size, segment) \ |
| (((addr) <= (segment).seg) && ((size) <= (segment).seg)) |
| |
| #else |
| |
| static inline int __access_ok(unsigned long addr, unsigned long size, |
| mm_segment_t seg) |
| { |
| if (addr > seg.seg) |
| return 0; |
| return (size == 0 || size - 1 <= seg.seg - addr); |
| } |
| |
| #endif |
| |
| #define access_ok(addr, size) \ |
| (__chk_user_ptr(addr), \ |
| __access_ok((__force unsigned long)(addr), (size), get_fs())) |
| |
| /* |
| * These are the main single-value transfer routines. They automatically |
| * use the right size if we just have the right pointer type. |
| * |
| * This gets kind of ugly. We want to return _two_ values in "get_user()" |
| * and yet we don't want to do any pointers, because that is too much |
| * of a performance impact. Thus we have a few rather ugly macros here, |
| * and hide all the ugliness from the user. |
| * |
| * The "__xxx" versions of the user access functions are versions that |
| * do not verify the address space, that must have been done previously |
| * with a separate "access_ok()" call (this is used when we do multiple |
| * accesses to the same area of user memory). |
| * |
| * As we use the same address space for kernel and user data on the |
| * PowerPC, we can just do these as direct assignments. (Of course, the |
| * exception handling means that it's no longer "just"...) |
| * |
| */ |
| #define get_user(x, ptr) \ |
| __get_user_check((x), (ptr), sizeof(*(ptr))) |
| #define put_user(x, ptr) \ |
| __put_user_check((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr))) |
| |
| #define __get_user(x, ptr) \ |
| __get_user_nocheck((x), (ptr), sizeof(*(ptr)), true) |
| #define __put_user(x, ptr) \ |
| __put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr))) |
| #define __put_user_goto(x, ptr, label) \ |
| __put_user_nocheck_goto((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)), label) |
| |
| #define __get_user_allowed(x, ptr) \ |
| __get_user_nocheck((x), (ptr), sizeof(*(ptr)), false) |
| |
| #define __get_user_inatomic(x, ptr) \ |
| __get_user_nosleep((x), (ptr), sizeof(*(ptr))) |
| #define __put_user_inatomic(x, ptr) \ |
| __put_user_nosleep((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr))) |
| |
| #ifdef CONFIG_PPC64 |
| |
| #define ___get_user_instr(gu_op, dest, ptr) \ |
| ({ \ |
| long __gui_ret = 0; \ |
| unsigned long __gui_ptr = (unsigned long)ptr; \ |
| struct ppc_inst __gui_inst; \ |
| unsigned int __prefix, __suffix; \ |
| __gui_ret = gu_op(__prefix, (unsigned int __user *)__gui_ptr); \ |
| if (__gui_ret == 0) { \ |
| if ((__prefix >> 26) == OP_PREFIX) { \ |
| __gui_ret = gu_op(__suffix, \ |
| (unsigned int __user *)__gui_ptr + 1); \ |
| __gui_inst = ppc_inst_prefix(__prefix, \ |
| __suffix); \ |
| } else { \ |
| __gui_inst = ppc_inst(__prefix); \ |
| } \ |
| if (__gui_ret == 0) \ |
| (dest) = __gui_inst; \ |
| } \ |
| __gui_ret; \ |
| }) |
| |
| #define get_user_instr(x, ptr) \ |
| ___get_user_instr(get_user, x, ptr) |
| |
| #define __get_user_instr(x, ptr) \ |
| ___get_user_instr(__get_user, x, ptr) |
| |
| #define __get_user_instr_inatomic(x, ptr) \ |
| ___get_user_instr(__get_user_inatomic, x, ptr) |
| |
| #else /* !CONFIG_PPC64 */ |
| #define get_user_instr(x, ptr) \ |
| get_user((x).val, (u32 __user *)(ptr)) |
| |
| #define __get_user_instr(x, ptr) \ |
| __get_user_nocheck((x).val, (u32 __user *)(ptr), sizeof(u32), true) |
| |
| #define __get_user_instr_inatomic(x, ptr) \ |
| __get_user_nosleep((x).val, (u32 __user *)(ptr), sizeof(u32)) |
| |
| #endif /* CONFIG_PPC64 */ |
| |
| extern long __put_user_bad(void); |
| |
| /* |
| * We don't tell gcc that we are accessing memory, but this is OK |
| * because we do not write to any memory gcc knows about, so there |
| * are no aliasing issues. |
| */ |
| #define __put_user_asm(x, addr, err, op) \ |
| __asm__ __volatile__( \ |
| "1: " op " %1,0(%2) # put_user\n" \ |
| "2:\n" \ |
| ".section .fixup,\"ax\"\n" \ |
| "3: li %0,%3\n" \ |
| " b 2b\n" \ |
| ".previous\n" \ |
| EX_TABLE(1b, 3b) \ |
| : "=r" (err) \ |
| : "r" (x), "b" (addr), "i" (-EFAULT), "0" (err)) |
| |
| #ifdef __powerpc64__ |
| #define __put_user_asm2(x, ptr, retval) \ |
| __put_user_asm(x, ptr, retval, "std") |
| #else /* __powerpc64__ */ |
| #define __put_user_asm2(x, addr, err) \ |
| __asm__ __volatile__( \ |
| "1: stw %1,0(%2)\n" \ |
| "2: stw %1+1,4(%2)\n" \ |
| "3:\n" \ |
| ".section .fixup,\"ax\"\n" \ |
| "4: li %0,%3\n" \ |
| " b 3b\n" \ |
| ".previous\n" \ |
| EX_TABLE(1b, 4b) \ |
| EX_TABLE(2b, 4b) \ |
| : "=r" (err) \ |
| : "r" (x), "b" (addr), "i" (-EFAULT), "0" (err)) |
| #endif /* __powerpc64__ */ |
| |
| #define __put_user_size_allowed(x, ptr, size, retval) \ |
| do { \ |
| retval = 0; \ |
| switch (size) { \ |
| case 1: __put_user_asm(x, ptr, retval, "stb"); break; \ |
| case 2: __put_user_asm(x, ptr, retval, "sth"); break; \ |
| case 4: __put_user_asm(x, ptr, retval, "stw"); break; \ |
| case 8: __put_user_asm2(x, ptr, retval); break; \ |
| default: __put_user_bad(); \ |
| } \ |
| } while (0) |
| |
| #define __put_user_size(x, ptr, size, retval) \ |
| do { \ |
| allow_write_to_user(ptr, size); \ |
| __put_user_size_allowed(x, ptr, size, retval); \ |
| prevent_write_to_user(ptr, size); \ |
| } while (0) |
| |
| #define __put_user_nocheck(x, ptr, size) \ |
| ({ \ |
| long __pu_err; \ |
| __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ |
| __typeof__(*(ptr)) __pu_val = (x); \ |
| __typeof__(size) __pu_size = (size); \ |
| \ |
| if (!is_kernel_addr((unsigned long)__pu_addr)) \ |
| might_fault(); \ |
| __chk_user_ptr(__pu_addr); \ |
| __put_user_size(__pu_val, __pu_addr, __pu_size, __pu_err); \ |
| \ |
| __pu_err; \ |
| }) |
| |
| #define __put_user_check(x, ptr, size) \ |
| ({ \ |
| long __pu_err = -EFAULT; \ |
| __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ |
| __typeof__(*(ptr)) __pu_val = (x); \ |
| __typeof__(size) __pu_size = (size); \ |
| \ |
| might_fault(); \ |
| if (access_ok(__pu_addr, __pu_size)) \ |
| __put_user_size(__pu_val, __pu_addr, __pu_size, __pu_err); \ |
| \ |
| __pu_err; \ |
| }) |
| |
| #define __put_user_nosleep(x, ptr, size) \ |
| ({ \ |
| long __pu_err; \ |
| __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ |
| __typeof__(*(ptr)) __pu_val = (x); \ |
| __typeof__(size) __pu_size = (size); \ |
| \ |
| __chk_user_ptr(__pu_addr); \ |
| __put_user_size(__pu_val, __pu_addr, __pu_size, __pu_err); \ |
| \ |
| __pu_err; \ |
| }) |
| |
| |
| #define __put_user_asm_goto(x, addr, label, op) \ |
| asm volatile goto( \ |
| "1: " op "%U1%X1 %0,%1 # put_user\n" \ |
| EX_TABLE(1b, %l2) \ |
| : \ |
| : "r" (x), "m" (*addr) \ |
| : \ |
| : label) |
| |
| #ifdef __powerpc64__ |
| #define __put_user_asm2_goto(x, ptr, label) \ |
| __put_user_asm_goto(x, ptr, label, "std") |
| #else /* __powerpc64__ */ |
| #define __put_user_asm2_goto(x, addr, label) \ |
| asm volatile goto( \ |
| "1: stw%X1 %0, %1\n" \ |
| "2: stw%X1 %L0, %L1\n" \ |
| EX_TABLE(1b, %l2) \ |
| EX_TABLE(2b, %l2) \ |
| : \ |
| : "r" (x), "m" (*addr) \ |
| : \ |
| : label) |
| #endif /* __powerpc64__ */ |
| |
| #define __put_user_size_goto(x, ptr, size, label) \ |
| do { \ |
| switch (size) { \ |
| case 1: __put_user_asm_goto(x, ptr, label, "stb"); break; \ |
| case 2: __put_user_asm_goto(x, ptr, label, "sth"); break; \ |
| case 4: __put_user_asm_goto(x, ptr, label, "stw"); break; \ |
| case 8: __put_user_asm2_goto(x, ptr, label); break; \ |
| default: __put_user_bad(); \ |
| } \ |
| } while (0) |
| |
| #define __put_user_nocheck_goto(x, ptr, size, label) \ |
| do { \ |
| __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ |
| if (!is_kernel_addr((unsigned long)__pu_addr)) \ |
| might_fault(); \ |
| __chk_user_ptr(ptr); \ |
| __put_user_size_goto((x), __pu_addr, (size), label); \ |
| } while (0) |
| |
| |
| extern long __get_user_bad(void); |
| |
| /* |
| * This does an atomic 128 byte aligned load from userspace. |
| * Upto caller to do enable_kernel_vmx() before calling! |
| */ |
| #define __get_user_atomic_128_aligned(kaddr, uaddr, err) \ |
| __asm__ __volatile__( \ |
| "1: lvx 0,0,%1 # get user\n" \ |
| " stvx 0,0,%2 # put kernel\n" \ |
| "2:\n" \ |
| ".section .fixup,\"ax\"\n" \ |
| "3: li %0,%3\n" \ |
| " b 2b\n" \ |
| ".previous\n" \ |
| EX_TABLE(1b, 3b) \ |
| : "=r" (err) \ |
| : "b" (uaddr), "b" (kaddr), "i" (-EFAULT), "0" (err)) |
| |
| #define __get_user_asm(x, addr, err, op) \ |
| __asm__ __volatile__( \ |
| "1: "op" %1,0(%2) # get_user\n" \ |
| "2:\n" \ |
| ".section .fixup,\"ax\"\n" \ |
| "3: li %0,%3\n" \ |
| " li %1,0\n" \ |
| " b 2b\n" \ |
| ".previous\n" \ |
| EX_TABLE(1b, 3b) \ |
| : "=r" (err), "=r" (x) \ |
| : "b" (addr), "i" (-EFAULT), "0" (err)) |
| |
| #ifdef __powerpc64__ |
| #define __get_user_asm2(x, addr, err) \ |
| __get_user_asm(x, addr, err, "ld") |
| #else /* __powerpc64__ */ |
| #define __get_user_asm2(x, addr, err) \ |
| __asm__ __volatile__( \ |
| "1: lwz %1,0(%2)\n" \ |
| "2: lwz %1+1,4(%2)\n" \ |
| "3:\n" \ |
| ".section .fixup,\"ax\"\n" \ |
| "4: li %0,%3\n" \ |
| " li %1,0\n" \ |
| " li %1+1,0\n" \ |
| " b 3b\n" \ |
| ".previous\n" \ |
| EX_TABLE(1b, 4b) \ |
| EX_TABLE(2b, 4b) \ |
| : "=r" (err), "=&r" (x) \ |
| : "b" (addr), "i" (-EFAULT), "0" (err)) |
| #endif /* __powerpc64__ */ |
| |
| #define __get_user_size_allowed(x, ptr, size, retval) \ |
| do { \ |
| retval = 0; \ |
| __chk_user_ptr(ptr); \ |
| if (size > sizeof(x)) \ |
| (x) = __get_user_bad(); \ |
| switch (size) { \ |
| case 1: __get_user_asm(x, ptr, retval, "lbz"); break; \ |
| case 2: __get_user_asm(x, ptr, retval, "lhz"); break; \ |
| case 4: __get_user_asm(x, ptr, retval, "lwz"); break; \ |
| case 8: __get_user_asm2(x, ptr, retval); break; \ |
| default: (x) = __get_user_bad(); \ |
| } \ |
| } while (0) |
| |
| #define __get_user_size(x, ptr, size, retval) \ |
| do { \ |
| allow_read_from_user(ptr, size); \ |
| __get_user_size_allowed(x, ptr, size, retval); \ |
| prevent_read_from_user(ptr, size); \ |
| } while (0) |
| |
| /* |
| * This is a type: either unsigned long, if the argument fits into |
| * that type, or otherwise unsigned long long. |
| */ |
| #define __long_type(x) \ |
| __typeof__(__builtin_choose_expr(sizeof(x) > sizeof(0UL), 0ULL, 0UL)) |
| |
| #define __get_user_nocheck(x, ptr, size, do_allow) \ |
| ({ \ |
| long __gu_err; \ |
| __long_type(*(ptr)) __gu_val; \ |
| __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ |
| __typeof__(size) __gu_size = (size); \ |
| \ |
| __chk_user_ptr(__gu_addr); \ |
| if (!is_kernel_addr((unsigned long)__gu_addr)) \ |
| might_fault(); \ |
| barrier_nospec(); \ |
| if (do_allow) \ |
| __get_user_size(__gu_val, __gu_addr, __gu_size, __gu_err); \ |
| else \ |
| __get_user_size_allowed(__gu_val, __gu_addr, __gu_size, __gu_err); \ |
| (x) = (__typeof__(*(ptr)))__gu_val; \ |
| \ |
| __gu_err; \ |
| }) |
| |
| #define __get_user_check(x, ptr, size) \ |
| ({ \ |
| long __gu_err = -EFAULT; \ |
| __long_type(*(ptr)) __gu_val = 0; \ |
| __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ |
| __typeof__(size) __gu_size = (size); \ |
| \ |
| might_fault(); \ |
| if (access_ok(__gu_addr, __gu_size)) { \ |
| barrier_nospec(); \ |
| __get_user_size(__gu_val, __gu_addr, __gu_size, __gu_err); \ |
| } \ |
| (x) = (__force __typeof__(*(ptr)))__gu_val; \ |
| \ |
| __gu_err; \ |
| }) |
| |
| #define __get_user_nosleep(x, ptr, size) \ |
| ({ \ |
| long __gu_err; \ |
| __long_type(*(ptr)) __gu_val; \ |
| __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ |
| __typeof__(size) __gu_size = (size); \ |
| \ |
| __chk_user_ptr(__gu_addr); \ |
| barrier_nospec(); \ |
| __get_user_size(__gu_val, __gu_addr, __gu_size, __gu_err); \ |
| (x) = (__force __typeof__(*(ptr)))__gu_val; \ |
| \ |
| __gu_err; \ |
| }) |
| |
| |
| /* more complex routines */ |
| |
| extern unsigned long __copy_tofrom_user(void __user *to, |
| const void __user *from, unsigned long size); |
| |
| #ifdef __powerpc64__ |
| static inline unsigned long |
| raw_copy_in_user(void __user *to, const void __user *from, unsigned long n) |
| { |
| unsigned long ret; |
| |
| barrier_nospec(); |
| allow_read_write_user(to, from, n); |
| ret = __copy_tofrom_user(to, from, n); |
| prevent_read_write_user(to, from, n); |
| return ret; |
| } |
| #endif /* __powerpc64__ */ |
| |
| static inline unsigned long raw_copy_from_user(void *to, |
| const void __user *from, unsigned long n) |
| { |
| unsigned long ret; |
| if (__builtin_constant_p(n) && (n <= 8)) { |
| ret = 1; |
| |
| switch (n) { |
| case 1: |
| barrier_nospec(); |
| __get_user_size(*(u8 *)to, from, 1, ret); |
| break; |
| case 2: |
| barrier_nospec(); |
| __get_user_size(*(u16 *)to, from, 2, ret); |
| break; |
| case 4: |
| barrier_nospec(); |
| __get_user_size(*(u32 *)to, from, 4, ret); |
| break; |
| case 8: |
| barrier_nospec(); |
| __get_user_size(*(u64 *)to, from, 8, ret); |
| break; |
| } |
| if (ret == 0) |
| return 0; |
| } |
| |
| barrier_nospec(); |
| allow_read_from_user(from, n); |
| ret = __copy_tofrom_user((__force void __user *)to, from, n); |
| prevent_read_from_user(from, n); |
| return ret; |
| } |
| |
| static inline unsigned long |
| raw_copy_to_user_allowed(void __user *to, const void *from, unsigned long n) |
| { |
| if (__builtin_constant_p(n) && (n <= 8)) { |
| unsigned long ret = 1; |
| |
| switch (n) { |
| case 1: |
| __put_user_size_allowed(*(u8 *)from, (u8 __user *)to, 1, ret); |
| break; |
| case 2: |
| __put_user_size_allowed(*(u16 *)from, (u16 __user *)to, 2, ret); |
| break; |
| case 4: |
| __put_user_size_allowed(*(u32 *)from, (u32 __user *)to, 4, ret); |
| break; |
| case 8: |
| __put_user_size_allowed(*(u64 *)from, (u64 __user *)to, 8, ret); |
| break; |
| } |
| if (ret == 0) |
| return 0; |
| } |
| |
| return __copy_tofrom_user(to, (__force const void __user *)from, n); |
| } |
| |
| static inline unsigned long |
| raw_copy_to_user(void __user *to, const void *from, unsigned long n) |
| { |
| unsigned long ret; |
| |
| allow_write_to_user(to, n); |
| ret = raw_copy_to_user_allowed(to, from, n); |
| prevent_write_to_user(to, n); |
| return ret; |
| } |
| |
| static __always_inline unsigned long __must_check |
| copy_to_user_mcsafe(void __user *to, const void *from, unsigned long n) |
| { |
| if (likely(check_copy_size(from, n, true))) { |
| if (access_ok(to, n)) { |
| allow_write_to_user(to, n); |
| n = memcpy_mcsafe((void *)to, from, n); |
| prevent_write_to_user(to, n); |
| } |
| } |
| |
| return n; |
| } |
| |
| unsigned long __arch_clear_user(void __user *addr, unsigned long size); |
| |
| static inline unsigned long clear_user(void __user *addr, unsigned long size) |
| { |
| unsigned long ret = size; |
| might_fault(); |
| if (likely(access_ok(addr, size))) { |
| allow_write_to_user(addr, size); |
| ret = __arch_clear_user(addr, size); |
| prevent_write_to_user(addr, size); |
| } |
| return ret; |
| } |
| |
| static inline unsigned long __clear_user(void __user *addr, unsigned long size) |
| { |
| return clear_user(addr, size); |
| } |
| |
| extern long strncpy_from_user(char *dst, const char __user *src, long count); |
| extern __must_check long strnlen_user(const char __user *str, long n); |
| |
| extern long __copy_from_user_flushcache(void *dst, const void __user *src, |
| unsigned size); |
| extern void memcpy_page_flushcache(char *to, struct page *page, size_t offset, |
| size_t len); |
| |
| static __must_check inline bool user_access_begin(const void __user *ptr, size_t len) |
| { |
| if (unlikely(!access_ok(ptr, len))) |
| return false; |
| allow_read_write_user((void __user *)ptr, ptr, len); |
| return true; |
| } |
| #define user_access_begin user_access_begin |
| #define user_access_end prevent_current_access_user |
| #define user_access_save prevent_user_access_return |
| #define user_access_restore restore_user_access |
| |
| static __must_check inline bool |
| user_read_access_begin(const void __user *ptr, size_t len) |
| { |
| if (unlikely(!access_ok(ptr, len))) |
| return false; |
| allow_read_from_user(ptr, len); |
| return true; |
| } |
| #define user_read_access_begin user_read_access_begin |
| #define user_read_access_end prevent_current_read_from_user |
| |
| static __must_check inline bool |
| user_write_access_begin(const void __user *ptr, size_t len) |
| { |
| if (unlikely(!access_ok(ptr, len))) |
| return false; |
| allow_write_to_user((void __user *)ptr, len); |
| return true; |
| } |
| #define user_write_access_begin user_write_access_begin |
| #define user_write_access_end prevent_current_write_to_user |
| |
| #define unsafe_op_wrap(op, err) do { if (unlikely(op)) goto err; } while (0) |
| #define unsafe_get_user(x, p, e) unsafe_op_wrap(__get_user_allowed(x, p), e) |
| #define unsafe_put_user(x, p, e) __put_user_goto(x, p, e) |
| |
| #define unsafe_copy_to_user(d, s, l, e) \ |
| do { \ |
| u8 __user *_dst = (u8 __user *)(d); \ |
| const u8 *_src = (const u8 *)(s); \ |
| size_t _len = (l); \ |
| int _i; \ |
| \ |
| for (_i = 0; _i < (_len & ~(sizeof(long) - 1)); _i += sizeof(long)) \ |
| __put_user_goto(*(long*)(_src + _i), (long __user *)(_dst + _i), e);\ |
| if (IS_ENABLED(CONFIG_PPC64) && (_len & 4)) { \ |
| __put_user_goto(*(u32*)(_src + _i), (u32 __user *)(_dst + _i), e); \ |
| _i += 4; \ |
| } \ |
| if (_len & 2) { \ |
| __put_user_goto(*(u16*)(_src + _i), (u16 __user *)(_dst + _i), e); \ |
| _i += 2; \ |
| } \ |
| if (_len & 1) \ |
| __put_user_goto(*(u8*)(_src + _i), (u8 __user *)(_dst + _i), e);\ |
| } while (0) |
| |
| #endif /* _ARCH_POWERPC_UACCESS_H */ |