| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2017 NXP Semiconductors. |
| * Author: Marco Franchi <marco.franchi@nxp.com> |
| * |
| * Based on Panel Simple driver by Thierry Reding <treding@nvidia.com> |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/consumer.h> |
| |
| #include <video/display_timing.h> |
| #include <video/videomode.h> |
| |
| #include <drm/drm_crtc.h> |
| #include <drm/drm_device.h> |
| #include <drm/drm_panel.h> |
| |
| struct seiko_panel_desc { |
| const struct drm_display_mode *modes; |
| unsigned int num_modes; |
| const struct display_timing *timings; |
| unsigned int num_timings; |
| |
| unsigned int bpc; |
| |
| /** |
| * @width: width (in millimeters) of the panel's active display area |
| * @height: height (in millimeters) of the panel's active display area |
| */ |
| struct { |
| unsigned int width; |
| unsigned int height; |
| } size; |
| |
| u32 bus_format; |
| u32 bus_flags; |
| }; |
| |
| struct seiko_panel { |
| struct drm_panel base; |
| bool prepared; |
| bool enabled; |
| const struct seiko_panel_desc *desc; |
| struct regulator *dvdd; |
| struct regulator *avdd; |
| }; |
| |
| static inline struct seiko_panel *to_seiko_panel(struct drm_panel *panel) |
| { |
| return container_of(panel, struct seiko_panel, base); |
| } |
| |
| static int seiko_panel_get_fixed_modes(struct seiko_panel *panel, |
| struct drm_connector *connector) |
| { |
| struct drm_display_mode *mode; |
| unsigned int i, num = 0; |
| |
| if (!panel->desc) |
| return 0; |
| |
| for (i = 0; i < panel->desc->num_timings; i++) { |
| const struct display_timing *dt = &panel->desc->timings[i]; |
| struct videomode vm; |
| |
| videomode_from_timing(dt, &vm); |
| mode = drm_mode_create(connector->dev); |
| if (!mode) { |
| dev_err(panel->base.dev, "failed to add mode %ux%u\n", |
| dt->hactive.typ, dt->vactive.typ); |
| continue; |
| } |
| |
| drm_display_mode_from_videomode(&vm, mode); |
| |
| mode->type |= DRM_MODE_TYPE_DRIVER; |
| |
| if (panel->desc->num_timings == 1) |
| mode->type |= DRM_MODE_TYPE_PREFERRED; |
| |
| drm_mode_probed_add(connector, mode); |
| num++; |
| } |
| |
| for (i = 0; i < panel->desc->num_modes; i++) { |
| const struct drm_display_mode *m = &panel->desc->modes[i]; |
| |
| mode = drm_mode_duplicate(connector->dev, m); |
| if (!mode) { |
| dev_err(panel->base.dev, "failed to add mode %ux%u@%u\n", |
| m->hdisplay, m->vdisplay, |
| drm_mode_vrefresh(m)); |
| continue; |
| } |
| |
| mode->type |= DRM_MODE_TYPE_DRIVER; |
| |
| if (panel->desc->num_modes == 1) |
| mode->type |= DRM_MODE_TYPE_PREFERRED; |
| |
| drm_mode_set_name(mode); |
| |
| drm_mode_probed_add(connector, mode); |
| num++; |
| } |
| |
| connector->display_info.bpc = panel->desc->bpc; |
| connector->display_info.width_mm = panel->desc->size.width; |
| connector->display_info.height_mm = panel->desc->size.height; |
| if (panel->desc->bus_format) |
| drm_display_info_set_bus_formats(&connector->display_info, |
| &panel->desc->bus_format, 1); |
| connector->display_info.bus_flags = panel->desc->bus_flags; |
| |
| return num; |
| } |
| |
| static int seiko_panel_disable(struct drm_panel *panel) |
| { |
| struct seiko_panel *p = to_seiko_panel(panel); |
| |
| if (!p->enabled) |
| return 0; |
| |
| p->enabled = false; |
| |
| return 0; |
| } |
| |
| static int seiko_panel_unprepare(struct drm_panel *panel) |
| { |
| struct seiko_panel *p = to_seiko_panel(panel); |
| |
| if (!p->prepared) |
| return 0; |
| |
| regulator_disable(p->avdd); |
| |
| /* Add a 100ms delay as per the panel datasheet */ |
| msleep(100); |
| |
| regulator_disable(p->dvdd); |
| |
| p->prepared = false; |
| |
| return 0; |
| } |
| |
| static int seiko_panel_prepare(struct drm_panel *panel) |
| { |
| struct seiko_panel *p = to_seiko_panel(panel); |
| int err; |
| |
| if (p->prepared) |
| return 0; |
| |
| err = regulator_enable(p->dvdd); |
| if (err < 0) { |
| dev_err(panel->dev, "failed to enable dvdd: %d\n", err); |
| return err; |
| } |
| |
| /* Add a 100ms delay as per the panel datasheet */ |
| msleep(100); |
| |
| err = regulator_enable(p->avdd); |
| if (err < 0) { |
| dev_err(panel->dev, "failed to enable avdd: %d\n", err); |
| goto disable_dvdd; |
| } |
| |
| p->prepared = true; |
| |
| return 0; |
| |
| disable_dvdd: |
| regulator_disable(p->dvdd); |
| return err; |
| } |
| |
| static int seiko_panel_enable(struct drm_panel *panel) |
| { |
| struct seiko_panel *p = to_seiko_panel(panel); |
| |
| if (p->enabled) |
| return 0; |
| |
| p->enabled = true; |
| |
| return 0; |
| } |
| |
| static int seiko_panel_get_modes(struct drm_panel *panel, |
| struct drm_connector *connector) |
| { |
| struct seiko_panel *p = to_seiko_panel(panel); |
| |
| /* add hard-coded panel modes */ |
| return seiko_panel_get_fixed_modes(p, connector); |
| } |
| |
| static int seiko_panel_get_timings(struct drm_panel *panel, |
| unsigned int num_timings, |
| struct display_timing *timings) |
| { |
| struct seiko_panel *p = to_seiko_panel(panel); |
| unsigned int i; |
| |
| if (p->desc->num_timings < num_timings) |
| num_timings = p->desc->num_timings; |
| |
| if (timings) |
| for (i = 0; i < num_timings; i++) |
| timings[i] = p->desc->timings[i]; |
| |
| return p->desc->num_timings; |
| } |
| |
| static const struct drm_panel_funcs seiko_panel_funcs = { |
| .disable = seiko_panel_disable, |
| .unprepare = seiko_panel_unprepare, |
| .prepare = seiko_panel_prepare, |
| .enable = seiko_panel_enable, |
| .get_modes = seiko_panel_get_modes, |
| .get_timings = seiko_panel_get_timings, |
| }; |
| |
| static int seiko_panel_probe(struct device *dev, |
| const struct seiko_panel_desc *desc) |
| { |
| struct seiko_panel *panel; |
| int err; |
| |
| panel = devm_kzalloc(dev, sizeof(*panel), GFP_KERNEL); |
| if (!panel) |
| return -ENOMEM; |
| |
| panel->enabled = false; |
| panel->prepared = false; |
| panel->desc = desc; |
| |
| panel->dvdd = devm_regulator_get(dev, "dvdd"); |
| if (IS_ERR(panel->dvdd)) |
| return PTR_ERR(panel->dvdd); |
| |
| panel->avdd = devm_regulator_get(dev, "avdd"); |
| if (IS_ERR(panel->avdd)) |
| return PTR_ERR(panel->avdd); |
| |
| drm_panel_init(&panel->base, dev, &seiko_panel_funcs, |
| DRM_MODE_CONNECTOR_DPI); |
| |
| err = drm_panel_of_backlight(&panel->base); |
| if (err) |
| return err; |
| |
| err = drm_panel_add(&panel->base); |
| if (err < 0) |
| return err; |
| |
| dev_set_drvdata(dev, panel); |
| |
| return 0; |
| } |
| |
| static int seiko_panel_remove(struct platform_device *pdev) |
| { |
| struct seiko_panel *panel = dev_get_drvdata(&pdev->dev); |
| |
| drm_panel_remove(&panel->base); |
| drm_panel_disable(&panel->base); |
| |
| return 0; |
| } |
| |
| static void seiko_panel_shutdown(struct platform_device *pdev) |
| { |
| struct seiko_panel *panel = dev_get_drvdata(&pdev->dev); |
| |
| drm_panel_disable(&panel->base); |
| } |
| |
| static const struct display_timing seiko_43wvf1g_timing = { |
| .pixelclock = { 33500000, 33500000, 33500000 }, |
| .hactive = { 800, 800, 800 }, |
| .hfront_porch = { 164, 164, 164 }, |
| .hback_porch = { 89, 89, 89 }, |
| .hsync_len = { 10, 10, 10 }, |
| .vactive = { 480, 480, 480 }, |
| .vfront_porch = { 10, 10, 10 }, |
| .vback_porch = { 23, 23, 23 }, |
| .vsync_len = { 10, 10, 10 }, |
| .flags = DISPLAY_FLAGS_DE_LOW, |
| }; |
| |
| static const struct seiko_panel_desc seiko_43wvf1g = { |
| .timings = &seiko_43wvf1g_timing, |
| .num_timings = 1, |
| .bpc = 8, |
| .size = { |
| .width = 93, |
| .height = 57, |
| }, |
| .bus_format = MEDIA_BUS_FMT_RGB888_1X24, |
| .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE, |
| }; |
| |
| static const struct of_device_id platform_of_match[] = { |
| { |
| .compatible = "sii,43wvf1g", |
| .data = &seiko_43wvf1g, |
| }, { |
| /* sentinel */ |
| } |
| }; |
| MODULE_DEVICE_TABLE(of, platform_of_match); |
| |
| static int seiko_panel_platform_probe(struct platform_device *pdev) |
| { |
| const struct of_device_id *id; |
| |
| id = of_match_node(platform_of_match, pdev->dev.of_node); |
| if (!id) |
| return -ENODEV; |
| |
| return seiko_panel_probe(&pdev->dev, id->data); |
| } |
| |
| static struct platform_driver seiko_panel_platform_driver = { |
| .driver = { |
| .name = "seiko_panel", |
| .of_match_table = platform_of_match, |
| }, |
| .probe = seiko_panel_platform_probe, |
| .remove = seiko_panel_remove, |
| .shutdown = seiko_panel_shutdown, |
| }; |
| module_platform_driver(seiko_panel_platform_driver); |
| |
| MODULE_AUTHOR("Marco Franchi <marco.franchi@nxp.com>"); |
| MODULE_DESCRIPTION("Seiko 43WVF1G panel driver"); |
| MODULE_LICENSE("GPL v2"); |