| // SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) |
| // Copyright(c) 2015-17 Intel Corporation. |
| |
| /* |
| * SDW Intel Init Routines |
| * |
| * Initializes and creates SDW devices based on ACPI and Hardware values |
| */ |
| |
| #include <linux/acpi.h> |
| #include <linux/export.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/soundwire/sdw_intel.h> |
| #include "intel.h" |
| |
| #define SDW_LINK_TYPE 4 /* from Intel ACPI documentation */ |
| #define SDW_MAX_LINKS 4 |
| #define SDW_SHIM_LCAP 0x0 |
| #define SDW_SHIM_BASE 0x2C000 |
| #define SDW_ALH_BASE 0x2C800 |
| #define SDW_LINK_BASE 0x30000 |
| #define SDW_LINK_SIZE 0x10000 |
| |
| static int link_mask; |
| module_param_named(sdw_link_mask, link_mask, int, 0444); |
| MODULE_PARM_DESC(sdw_link_mask, "Intel link mask (one bit per link)"); |
| |
| static int sdw_intel_cleanup_pdev(struct sdw_intel_ctx *ctx) |
| { |
| struct sdw_intel_link_res *link = ctx->links; |
| int i; |
| |
| if (!link) |
| return 0; |
| |
| for (i = 0; i < ctx->count; i++) { |
| if (link->pdev) |
| platform_device_unregister(link->pdev); |
| link++; |
| } |
| |
| kfree(ctx->links); |
| ctx->links = NULL; |
| |
| return 0; |
| } |
| |
| static struct sdw_intel_ctx |
| *sdw_intel_add_controller(struct sdw_intel_res *res) |
| { |
| struct platform_device_info pdevinfo; |
| struct platform_device *pdev; |
| struct sdw_intel_link_res *link; |
| struct sdw_intel_ctx *ctx; |
| struct acpi_device *adev; |
| int ret, i; |
| u8 count; |
| u32 caps; |
| |
| if (acpi_bus_get_device(res->handle, &adev)) |
| return NULL; |
| |
| /* Found controller, find links supported */ |
| count = 0; |
| ret = fwnode_property_read_u8_array(acpi_fwnode_handle(adev), |
| "mipi-sdw-master-count", &count, 1); |
| |
| /* Don't fail on error, continue and use hw value */ |
| if (ret) { |
| dev_err(&adev->dev, |
| "Failed to read mipi-sdw-master-count: %d\n", ret); |
| count = SDW_MAX_LINKS; |
| } |
| |
| /* Check SNDWLCAP.LCOUNT */ |
| caps = ioread32(res->mmio_base + SDW_SHIM_BASE + SDW_SHIM_LCAP); |
| caps &= GENMASK(2, 0); |
| |
| /* Check HW supported vs property value and use min of two */ |
| count = min_t(u8, caps, count); |
| |
| /* Check count is within bounds */ |
| if (count > SDW_MAX_LINKS) { |
| dev_err(&adev->dev, "Link count %d exceeds max %d\n", |
| count, SDW_MAX_LINKS); |
| return NULL; |
| } else if (!count) { |
| dev_warn(&adev->dev, "No SoundWire links detected\n"); |
| return NULL; |
| } |
| |
| dev_dbg(&adev->dev, "Creating %d SDW Link devices\n", count); |
| |
| ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); |
| if (!ctx) |
| return NULL; |
| |
| ctx->count = count; |
| ctx->links = kcalloc(ctx->count, sizeof(*ctx->links), GFP_KERNEL); |
| if (!ctx->links) |
| goto link_err; |
| |
| link = ctx->links; |
| |
| /* Create SDW Master devices */ |
| for (i = 0; i < count; i++) { |
| if (link_mask && !(link_mask & BIT(i))) { |
| dev_dbg(&adev->dev, |
| "Link %d masked, will not be enabled\n", i); |
| link++; |
| continue; |
| } |
| |
| link->registers = res->mmio_base + SDW_LINK_BASE |
| + (SDW_LINK_SIZE * i); |
| link->shim = res->mmio_base + SDW_SHIM_BASE; |
| link->alh = res->mmio_base + SDW_ALH_BASE; |
| |
| link->ops = res->ops; |
| link->dev = res->dev; |
| |
| memset(&pdevinfo, 0, sizeof(pdevinfo)); |
| |
| pdevinfo.parent = res->parent; |
| pdevinfo.name = "int-sdw"; |
| pdevinfo.id = i; |
| pdevinfo.fwnode = acpi_fwnode_handle(adev); |
| |
| pdev = platform_device_register_full(&pdevinfo); |
| if (IS_ERR(pdev)) { |
| dev_err(&adev->dev, |
| "platform device creation failed: %ld\n", |
| PTR_ERR(pdev)); |
| goto pdev_err; |
| } |
| |
| link->pdev = pdev; |
| link++; |
| } |
| |
| return ctx; |
| |
| pdev_err: |
| sdw_intel_cleanup_pdev(ctx); |
| link_err: |
| kfree(ctx); |
| return NULL; |
| } |
| |
| static acpi_status sdw_intel_acpi_cb(acpi_handle handle, u32 level, |
| void *cdata, void **return_value) |
| { |
| struct sdw_intel_res *res = cdata; |
| struct acpi_device *adev; |
| acpi_status status; |
| u64 adr; |
| |
| status = acpi_evaluate_integer(handle, METHOD_NAME__ADR, NULL, &adr); |
| if (ACPI_FAILURE(status)) |
| return AE_OK; /* keep going */ |
| |
| if (acpi_bus_get_device(handle, &adev)) { |
| pr_err("%s: Couldn't find ACPI handle\n", __func__); |
| return AE_NOT_FOUND; |
| } |
| |
| res->handle = handle; |
| |
| /* |
| * On some Intel platforms, multiple children of the HDAS |
| * device can be found, but only one of them is the SoundWire |
| * controller. The SNDW device is always exposed with |
| * Name(_ADR, 0x40000000), with bits 31..28 representing the |
| * SoundWire link so filter accordingly |
| */ |
| if ((adr & GENMASK(31, 28)) >> 28 != SDW_LINK_TYPE) |
| return AE_OK; /* keep going */ |
| |
| /* device found, stop namespace walk */ |
| return AE_CTRL_TERMINATE; |
| } |
| |
| /** |
| * sdw_intel_init() - SoundWire Intel init routine |
| * @parent_handle: ACPI parent handle |
| * @res: resource data |
| * |
| * This scans the namespace and creates SoundWire link controller devices |
| * based on the info queried. |
| */ |
| void *sdw_intel_init(acpi_handle *parent_handle, struct sdw_intel_res *res) |
| { |
| acpi_status status; |
| |
| status = acpi_walk_namespace(ACPI_TYPE_DEVICE, |
| parent_handle, 1, |
| sdw_intel_acpi_cb, |
| NULL, res, NULL); |
| if (ACPI_FAILURE(status)) |
| return NULL; |
| |
| return sdw_intel_add_controller(res); |
| } |
| |
| /** |
| * sdw_intel_exit() - SoundWire Intel exit |
| * @arg: callback context |
| * |
| * Delete the controller instances created and cleanup |
| */ |
| void sdw_intel_exit(struct sdw_intel_ctx *ctx) |
| { |
| sdw_intel_cleanup_pdev(ctx); |
| kfree(ctx); |
| } |
| EXPORT_SYMBOL(sdw_intel_exit); |
| |
| MODULE_LICENSE("Dual BSD/GPL"); |
| MODULE_DESCRIPTION("Intel Soundwire Init Library"); |