| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net> |
| * |
| * arch/arm/mach-mvebu/kirkwood.c |
| * |
| * Flattened Device Tree board initialization |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/mbus.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/of_net.h> |
| #include <linux/of_platform.h> |
| #include <linux/slab.h> |
| #include <asm/hardware/cache-feroceon-l2.h> |
| #include <asm/mach/arch.h> |
| #include <asm/mach/map.h> |
| #include "kirkwood.h" |
| #include "kirkwood-pm.h" |
| #include "common.h" |
| |
| static struct resource kirkwood_cpufreq_resources[] = { |
| [0] = { |
| .start = CPU_CONTROL_PHYS, |
| .end = CPU_CONTROL_PHYS + 3, |
| .flags = IORESOURCE_MEM, |
| }, |
| }; |
| |
| static struct platform_device kirkwood_cpufreq_device = { |
| .name = "kirkwood-cpufreq", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(kirkwood_cpufreq_resources), |
| .resource = kirkwood_cpufreq_resources, |
| }; |
| |
| static void __init kirkwood_cpufreq_init(void) |
| { |
| platform_device_register(&kirkwood_cpufreq_device); |
| } |
| |
| static struct resource kirkwood_cpuidle_resource[] = { |
| { |
| .flags = IORESOURCE_MEM, |
| .start = DDR_OPERATION_BASE, |
| .end = DDR_OPERATION_BASE + 3, |
| }, |
| }; |
| |
| static struct platform_device kirkwood_cpuidle = { |
| .name = "kirkwood_cpuidle", |
| .id = -1, |
| .resource = kirkwood_cpuidle_resource, |
| .num_resources = 1, |
| }; |
| |
| static void __init kirkwood_cpuidle_init(void) |
| { |
| platform_device_register(&kirkwood_cpuidle); |
| } |
| |
| #define MV643XX_ETH_MAC_ADDR_LOW 0x0414 |
| #define MV643XX_ETH_MAC_ADDR_HIGH 0x0418 |
| |
| static void __init kirkwood_dt_eth_fixup(void) |
| { |
| struct device_node *np; |
| |
| /* |
| * The ethernet interfaces forget the MAC address assigned by u-boot |
| * if the clocks are turned off. Usually, u-boot on kirkwood boards |
| * has no DT support to properly set local-mac-address property. |
| * As a workaround, we get the MAC address from mv643xx_eth registers |
| * and update the port device node if no valid MAC address is set. |
| */ |
| for_each_compatible_node(np, NULL, "marvell,kirkwood-eth-port") { |
| struct device_node *pnp = of_get_parent(np); |
| struct clk *clk; |
| struct property *pmac; |
| u8 tmpmac[ETH_ALEN]; |
| void __iomem *io; |
| u8 *macaddr; |
| u32 reg; |
| |
| if (!pnp) |
| continue; |
| |
| /* skip disabled nodes or nodes with valid MAC address*/ |
| if (!of_device_is_available(pnp) || |
| !of_get_mac_address(np, tmpmac)) |
| goto eth_fixup_skip; |
| |
| clk = of_clk_get(pnp, 0); |
| if (IS_ERR(clk)) |
| goto eth_fixup_skip; |
| |
| io = of_iomap(pnp, 0); |
| if (!io) |
| goto eth_fixup_no_map; |
| |
| /* ensure port clock is not gated to not hang CPU */ |
| clk_prepare_enable(clk); |
| |
| /* store MAC address register contents in local-mac-address */ |
| pmac = kzalloc(sizeof(*pmac) + 6, GFP_KERNEL); |
| if (!pmac) |
| goto eth_fixup_no_mem; |
| |
| pmac->value = pmac + 1; |
| pmac->length = 6; |
| pmac->name = kstrdup("local-mac-address", GFP_KERNEL); |
| if (!pmac->name) { |
| kfree(pmac); |
| goto eth_fixup_no_mem; |
| } |
| |
| macaddr = pmac->value; |
| reg = readl(io + MV643XX_ETH_MAC_ADDR_HIGH); |
| macaddr[0] = (reg >> 24) & 0xff; |
| macaddr[1] = (reg >> 16) & 0xff; |
| macaddr[2] = (reg >> 8) & 0xff; |
| macaddr[3] = reg & 0xff; |
| |
| reg = readl(io + MV643XX_ETH_MAC_ADDR_LOW); |
| macaddr[4] = (reg >> 8) & 0xff; |
| macaddr[5] = reg & 0xff; |
| |
| of_update_property(np, pmac); |
| |
| eth_fixup_no_mem: |
| iounmap(io); |
| clk_disable_unprepare(clk); |
| eth_fixup_no_map: |
| clk_put(clk); |
| eth_fixup_skip: |
| of_node_put(pnp); |
| } |
| } |
| |
| /* |
| * Disable propagation of mbus errors to the CPU local bus, as this |
| * causes mbus errors (which can occur for example for PCI aborts) to |
| * throw CPU aborts, which we're not set up to deal with. |
| */ |
| static void kirkwood_disable_mbus_error_propagation(void) |
| { |
| void __iomem *cpu_config; |
| |
| cpu_config = ioremap(CPU_CONFIG_PHYS, 4); |
| writel(readl(cpu_config) & ~CPU_CONFIG_ERROR_PROP, cpu_config); |
| } |
| |
| static struct of_dev_auxdata auxdata[] __initdata = { |
| OF_DEV_AUXDATA("marvell,kirkwood-audio", 0xf10a0000, |
| "mvebu-audio", NULL), |
| { /* sentinel */ } |
| }; |
| |
| static void __init kirkwood_dt_init(void) |
| { |
| kirkwood_disable_mbus_error_propagation(); |
| |
| BUG_ON(mvebu_mbus_dt_init(false)); |
| |
| #ifdef CONFIG_CACHE_FEROCEON_L2 |
| feroceon_of_init(); |
| #endif |
| kirkwood_cpufreq_init(); |
| kirkwood_cpuidle_init(); |
| |
| kirkwood_pm_init(); |
| kirkwood_dt_eth_fixup(); |
| |
| of_platform_default_populate(NULL, auxdata, NULL); |
| } |
| |
| static const char * const kirkwood_dt_board_compat[] __initconst = { |
| "marvell,kirkwood", |
| NULL |
| }; |
| |
| DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)") |
| /* Maintainer: Jason Cooper <jason@lakedaemon.net> */ |
| .init_machine = kirkwood_dt_init, |
| .restart = mvebu_restart, |
| .dt_compat = kirkwood_dt_board_compat, |
| MACHINE_END |