| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * arch/arm/mach-ep93xx/clock.c |
| * Clock control for Cirrus EP93xx chips. |
| * |
| * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> |
| */ |
| |
| #define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt |
| |
| #include <linux/kernel.h> |
| #include <linux/clk.h> |
| #include <linux/err.h> |
| #include <linux/module.h> |
| #include <linux/string.h> |
| #include <linux/io.h> |
| #include <linux/spinlock.h> |
| #include <linux/clkdev.h> |
| #include <linux/clk-provider.h> |
| #include <linux/soc/cirrus/ep93xx.h> |
| |
| #include "hardware.h" |
| |
| #include <asm/div64.h> |
| |
| #include "soc.h" |
| |
| static DEFINE_SPINLOCK(clk_lock); |
| |
| static char fclk_divisors[] = { 1, 2, 4, 8, 16, 1, 1, 1 }; |
| static char hclk_divisors[] = { 1, 2, 4, 5, 6, 8, 16, 32 }; |
| static char pclk_divisors[] = { 1, 2, 4, 8 }; |
| |
| static char adc_divisors[] = { 16, 4 }; |
| static char sclk_divisors[] = { 2, 4 }; |
| static char lrclk_divisors[] = { 32, 64, 128 }; |
| |
| static const char * const mux_parents[] = { |
| "xtali", |
| "pll1", |
| "pll2" |
| }; |
| |
| /* |
| * PLL rate = 14.7456 MHz * (X1FBD + 1) * (X2FBD + 1) / (X2IPD + 1) / 2^PS |
| */ |
| static unsigned long calc_pll_rate(unsigned long long rate, u32 config_word) |
| { |
| int i; |
| |
| rate *= ((config_word >> 11) & 0x1f) + 1; /* X1FBD */ |
| rate *= ((config_word >> 5) & 0x3f) + 1; /* X2FBD */ |
| do_div(rate, (config_word & 0x1f) + 1); /* X2IPD */ |
| for (i = 0; i < ((config_word >> 16) & 3); i++) /* PS */ |
| rate >>= 1; |
| |
| return (unsigned long)rate; |
| } |
| |
| struct clk_psc { |
| struct clk_hw hw; |
| void __iomem *reg; |
| u8 bit_idx; |
| u32 mask; |
| u8 shift; |
| u8 width; |
| char *div; |
| u8 num_div; |
| spinlock_t *lock; |
| }; |
| |
| #define to_clk_psc(_hw) container_of(_hw, struct clk_psc, hw) |
| |
| static int ep93xx_clk_is_enabled(struct clk_hw *hw) |
| { |
| struct clk_psc *psc = to_clk_psc(hw); |
| u32 val = readl(psc->reg); |
| |
| return (val & BIT(psc->bit_idx)) ? 1 : 0; |
| } |
| |
| static int ep93xx_clk_enable(struct clk_hw *hw) |
| { |
| struct clk_psc *psc = to_clk_psc(hw); |
| unsigned long flags = 0; |
| u32 val; |
| |
| if (psc->lock) |
| spin_lock_irqsave(psc->lock, flags); |
| |
| val = __raw_readl(psc->reg); |
| val |= BIT(psc->bit_idx); |
| |
| ep93xx_syscon_swlocked_write(val, psc->reg); |
| |
| if (psc->lock) |
| spin_unlock_irqrestore(psc->lock, flags); |
| |
| return 0; |
| } |
| |
| static void ep93xx_clk_disable(struct clk_hw *hw) |
| { |
| struct clk_psc *psc = to_clk_psc(hw); |
| unsigned long flags = 0; |
| u32 val; |
| |
| if (psc->lock) |
| spin_lock_irqsave(psc->lock, flags); |
| |
| val = __raw_readl(psc->reg); |
| val &= ~BIT(psc->bit_idx); |
| |
| ep93xx_syscon_swlocked_write(val, psc->reg); |
| |
| if (psc->lock) |
| spin_unlock_irqrestore(psc->lock, flags); |
| } |
| |
| static const struct clk_ops clk_ep93xx_gate_ops = { |
| .enable = ep93xx_clk_enable, |
| .disable = ep93xx_clk_disable, |
| .is_enabled = ep93xx_clk_is_enabled, |
| }; |
| |
| static struct clk_hw *ep93xx_clk_register_gate(const char *name, |
| const char *parent_name, |
| void __iomem *reg, |
| u8 bit_idx) |
| { |
| struct clk_init_data init; |
| struct clk_psc *psc; |
| struct clk *clk; |
| |
| psc = kzalloc(sizeof(*psc), GFP_KERNEL); |
| if (!psc) |
| return ERR_PTR(-ENOMEM); |
| |
| init.name = name; |
| init.ops = &clk_ep93xx_gate_ops; |
| init.flags = CLK_SET_RATE_PARENT; |
| init.parent_names = (parent_name ? &parent_name : NULL); |
| init.num_parents = (parent_name ? 1 : 0); |
| |
| psc->reg = reg; |
| psc->bit_idx = bit_idx; |
| psc->hw.init = &init; |
| psc->lock = &clk_lock; |
| |
| clk = clk_register(NULL, &psc->hw); |
| if (IS_ERR(clk)) |
| kfree(psc); |
| |
| return &psc->hw; |
| } |
| |
| static u8 ep93xx_mux_get_parent(struct clk_hw *hw) |
| { |
| struct clk_psc *psc = to_clk_psc(hw); |
| u32 val = __raw_readl(psc->reg); |
| |
| if (!(val & EP93XX_SYSCON_CLKDIV_ESEL)) |
| return 0; |
| |
| if (!(val & EP93XX_SYSCON_CLKDIV_PSEL)) |
| return 1; |
| |
| return 2; |
| } |
| |
| static int ep93xx_mux_set_parent_lock(struct clk_hw *hw, u8 index) |
| { |
| struct clk_psc *psc = to_clk_psc(hw); |
| unsigned long flags = 0; |
| u32 val; |
| |
| if (index >= ARRAY_SIZE(mux_parents)) |
| return -EINVAL; |
| |
| if (psc->lock) |
| spin_lock_irqsave(psc->lock, flags); |
| |
| val = __raw_readl(psc->reg); |
| val &= ~(EP93XX_SYSCON_CLKDIV_ESEL | EP93XX_SYSCON_CLKDIV_PSEL); |
| |
| |
| if (index != 0) { |
| val |= EP93XX_SYSCON_CLKDIV_ESEL; |
| val |= (index - 1) ? EP93XX_SYSCON_CLKDIV_PSEL : 0; |
| } |
| |
| ep93xx_syscon_swlocked_write(val, psc->reg); |
| |
| if (psc->lock) |
| spin_unlock_irqrestore(psc->lock, flags); |
| |
| return 0; |
| } |
| |
| static bool is_best(unsigned long rate, unsigned long now, |
| unsigned long best) |
| { |
| return abs(rate - now) < abs(rate - best); |
| } |
| |
| static int ep93xx_mux_determine_rate(struct clk_hw *hw, |
| struct clk_rate_request *req) |
| { |
| unsigned long rate = req->rate; |
| struct clk *best_parent = 0; |
| unsigned long __parent_rate; |
| unsigned long best_rate = 0, actual_rate, mclk_rate; |
| unsigned long best_parent_rate; |
| int __div = 0, __pdiv = 0; |
| int i; |
| |
| /* |
| * Try the two pll's and the external clock |
| * Because the valid predividers are 2, 2.5 and 3, we multiply |
| * all the clocks by 2 to avoid floating point math. |
| * |
| * This is based on the algorithm in the ep93xx raster guide: |
| * http://be-a-maverick.com/en/pubs/appNote/AN269REV1.pdf |
| * |
| */ |
| for (i = 0; i < ARRAY_SIZE(mux_parents); i++) { |
| struct clk *parent = clk_get_sys(mux_parents[i], NULL); |
| |
| __parent_rate = clk_get_rate(parent); |
| mclk_rate = __parent_rate * 2; |
| |
| /* Try each predivider value */ |
| for (__pdiv = 4; __pdiv <= 6; __pdiv++) { |
| __div = mclk_rate / (rate * __pdiv); |
| if (__div < 2 || __div > 127) |
| continue; |
| |
| actual_rate = mclk_rate / (__pdiv * __div); |
| if (is_best(rate, actual_rate, best_rate)) { |
| best_rate = actual_rate; |
| best_parent_rate = __parent_rate; |
| best_parent = parent; |
| } |
| } |
| } |
| |
| if (!best_parent) |
| return -EINVAL; |
| |
| req->best_parent_rate = best_parent_rate; |
| req->best_parent_hw = __clk_get_hw(best_parent); |
| req->rate = best_rate; |
| |
| return 0; |
| } |
| |
| static unsigned long ep93xx_ddiv_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct clk_psc *psc = to_clk_psc(hw); |
| unsigned long rate = 0; |
| u32 val = __raw_readl(psc->reg); |
| int __pdiv = ((val >> EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) & 0x03); |
| int __div = val & 0x7f; |
| |
| if (__div > 0) |
| rate = (parent_rate * 2) / ((__pdiv + 3) * __div); |
| |
| return rate; |
| } |
| |
| static int ep93xx_ddiv_set_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long parent_rate) |
| { |
| struct clk_psc *psc = to_clk_psc(hw); |
| int pdiv = 0, div = 0; |
| unsigned long best_rate = 0, actual_rate, mclk_rate; |
| int __div = 0, __pdiv = 0; |
| u32 val; |
| |
| mclk_rate = parent_rate * 2; |
| |
| for (__pdiv = 4; __pdiv <= 6; __pdiv++) { |
| __div = mclk_rate / (rate * __pdiv); |
| if (__div < 2 || __div > 127) |
| continue; |
| |
| actual_rate = mclk_rate / (__pdiv * __div); |
| if (is_best(rate, actual_rate, best_rate)) { |
| pdiv = __pdiv - 3; |
| div = __div; |
| best_rate = actual_rate; |
| } |
| } |
| |
| if (!best_rate) |
| return -EINVAL; |
| |
| val = __raw_readl(psc->reg); |
| |
| /* Clear old dividers */ |
| val &= ~0x37f; |
| |
| /* Set the new pdiv and div bits for the new clock rate */ |
| val |= (pdiv << EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | div; |
| ep93xx_syscon_swlocked_write(val, psc->reg); |
| |
| return 0; |
| } |
| |
| static const struct clk_ops clk_ddiv_ops = { |
| .enable = ep93xx_clk_enable, |
| .disable = ep93xx_clk_disable, |
| .is_enabled = ep93xx_clk_is_enabled, |
| .get_parent = ep93xx_mux_get_parent, |
| .set_parent = ep93xx_mux_set_parent_lock, |
| .determine_rate = ep93xx_mux_determine_rate, |
| .recalc_rate = ep93xx_ddiv_recalc_rate, |
| .set_rate = ep93xx_ddiv_set_rate, |
| }; |
| |
| static struct clk_hw *clk_hw_register_ddiv(const char *name, |
| void __iomem *reg, |
| u8 bit_idx) |
| { |
| struct clk_init_data init; |
| struct clk_psc *psc; |
| struct clk *clk; |
| |
| psc = kzalloc(sizeof(*psc), GFP_KERNEL); |
| if (!psc) |
| return ERR_PTR(-ENOMEM); |
| |
| init.name = name; |
| init.ops = &clk_ddiv_ops; |
| init.flags = 0; |
| init.parent_names = mux_parents; |
| init.num_parents = ARRAY_SIZE(mux_parents); |
| |
| psc->reg = reg; |
| psc->bit_idx = bit_idx; |
| psc->lock = &clk_lock; |
| psc->hw.init = &init; |
| |
| clk = clk_register(NULL, &psc->hw); |
| if (IS_ERR(clk)) |
| kfree(psc); |
| |
| return &psc->hw; |
| } |
| |
| static unsigned long ep93xx_div_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct clk_psc *psc = to_clk_psc(hw); |
| u32 val = __raw_readl(psc->reg); |
| u8 index = (val & psc->mask) >> psc->shift; |
| |
| if (index > psc->num_div) |
| return 0; |
| |
| return DIV_ROUND_UP_ULL(parent_rate, psc->div[index]); |
| } |
| |
| static long ep93xx_div_round_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long *parent_rate) |
| { |
| struct clk_psc *psc = to_clk_psc(hw); |
| unsigned long best = 0, now, maxdiv; |
| int i; |
| |
| maxdiv = psc->div[psc->num_div - 1]; |
| |
| for (i = 0; i < psc->num_div; i++) { |
| if ((rate * psc->div[i]) == *parent_rate) |
| return DIV_ROUND_UP_ULL((u64)*parent_rate, psc->div[i]); |
| |
| now = DIV_ROUND_UP_ULL((u64)*parent_rate, psc->div[i]); |
| |
| if (is_best(rate, now, best)) |
| best = now; |
| } |
| |
| if (!best) |
| best = DIV_ROUND_UP_ULL(*parent_rate, maxdiv); |
| |
| return best; |
| } |
| |
| static int ep93xx_div_set_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long parent_rate) |
| { |
| struct clk_psc *psc = to_clk_psc(hw); |
| u32 val = __raw_readl(psc->reg) & ~psc->mask; |
| int i; |
| |
| for (i = 0; i < psc->num_div; i++) |
| if (rate == parent_rate / psc->div[i]) { |
| val |= i << psc->shift; |
| break; |
| } |
| |
| if (i == psc->num_div) |
| return -EINVAL; |
| |
| ep93xx_syscon_swlocked_write(val, psc->reg); |
| |
| return 0; |
| } |
| |
| static const struct clk_ops ep93xx_div_ops = { |
| .enable = ep93xx_clk_enable, |
| .disable = ep93xx_clk_disable, |
| .is_enabled = ep93xx_clk_is_enabled, |
| .recalc_rate = ep93xx_div_recalc_rate, |
| .round_rate = ep93xx_div_round_rate, |
| .set_rate = ep93xx_div_set_rate, |
| }; |
| |
| static struct clk_hw *clk_hw_register_div(const char *name, |
| const char *parent_name, |
| void __iomem *reg, |
| u8 enable_bit, |
| u8 shift, |
| u8 width, |
| char *clk_divisors, |
| u8 num_div) |
| { |
| struct clk_init_data init; |
| struct clk_psc *psc; |
| struct clk *clk; |
| |
| psc = kzalloc(sizeof(*psc), GFP_KERNEL); |
| if (!psc) |
| return ERR_PTR(-ENOMEM); |
| |
| init.name = name; |
| init.ops = &ep93xx_div_ops; |
| init.flags = 0; |
| init.parent_names = (parent_name ? &parent_name : NULL); |
| init.num_parents = 1; |
| |
| psc->reg = reg; |
| psc->bit_idx = enable_bit; |
| psc->mask = GENMASK(shift + width - 1, shift); |
| psc->shift = shift; |
| psc->div = clk_divisors; |
| psc->num_div = num_div; |
| psc->lock = &clk_lock; |
| psc->hw.init = &init; |
| |
| clk = clk_register(NULL, &psc->hw); |
| if (IS_ERR(clk)) |
| kfree(psc); |
| |
| return &psc->hw; |
| } |
| |
| struct ep93xx_gate { |
| unsigned int bit; |
| const char *dev_id; |
| const char *con_id; |
| }; |
| |
| static struct ep93xx_gate ep93xx_uarts[] = { |
| {EP93XX_SYSCON_DEVCFG_U1EN, "apb:uart1", NULL}, |
| {EP93XX_SYSCON_DEVCFG_U2EN, "apb:uart2", NULL}, |
| {EP93XX_SYSCON_DEVCFG_U3EN, "apb:uart3", NULL}, |
| }; |
| |
| static void __init ep93xx_uart_clock_init(void) |
| { |
| unsigned int i; |
| struct clk_hw *hw; |
| u32 value; |
| unsigned int clk_uart_div; |
| |
| value = __raw_readl(EP93XX_SYSCON_PWRCNT); |
| if (value & EP93XX_SYSCON_PWRCNT_UARTBAUD) |
| clk_uart_div = 1; |
| else |
| clk_uart_div = 2; |
| |
| hw = clk_hw_register_fixed_factor(NULL, "uart", "xtali", 0, 1, clk_uart_div); |
| |
| /* parenting uart gate clocks to uart clock */ |
| for (i = 0; i < ARRAY_SIZE(ep93xx_uarts); i++) { |
| hw = ep93xx_clk_register_gate(ep93xx_uarts[i].dev_id, |
| "uart", |
| EP93XX_SYSCON_DEVCFG, |
| ep93xx_uarts[i].bit); |
| |
| clk_hw_register_clkdev(hw, NULL, ep93xx_uarts[i].dev_id); |
| } |
| } |
| |
| static struct ep93xx_gate ep93xx_dmas[] = { |
| {EP93XX_SYSCON_PWRCNT_DMA_M2P0, NULL, "m2p0"}, |
| {EP93XX_SYSCON_PWRCNT_DMA_M2P1, NULL, "m2p1"}, |
| {EP93XX_SYSCON_PWRCNT_DMA_M2P2, NULL, "m2p2"}, |
| {EP93XX_SYSCON_PWRCNT_DMA_M2P3, NULL, "m2p3"}, |
| {EP93XX_SYSCON_PWRCNT_DMA_M2P4, NULL, "m2p4"}, |
| {EP93XX_SYSCON_PWRCNT_DMA_M2P5, NULL, "m2p5"}, |
| {EP93XX_SYSCON_PWRCNT_DMA_M2P6, NULL, "m2p6"}, |
| {EP93XX_SYSCON_PWRCNT_DMA_M2P7, NULL, "m2p7"}, |
| {EP93XX_SYSCON_PWRCNT_DMA_M2P8, NULL, "m2p8"}, |
| {EP93XX_SYSCON_PWRCNT_DMA_M2P9, NULL, "m2p9"}, |
| {EP93XX_SYSCON_PWRCNT_DMA_M2M0, NULL, "m2m0"}, |
| {EP93XX_SYSCON_PWRCNT_DMA_M2M1, NULL, "m2m1"}, |
| }; |
| |
| static void __init ep93xx_dma_clock_init(void) |
| { |
| unsigned int i; |
| struct clk_hw *hw; |
| int ret; |
| |
| for (i = 0; i < ARRAY_SIZE(ep93xx_dmas); i++) { |
| hw = clk_hw_register_gate(NULL, ep93xx_dmas[i].con_id, |
| "hclk", 0, |
| EP93XX_SYSCON_PWRCNT, |
| ep93xx_dmas[i].bit, |
| 0, |
| &clk_lock); |
| |
| ret = clk_hw_register_clkdev(hw, ep93xx_dmas[i].con_id, NULL); |
| if (ret) |
| pr_err("%s: failed to register lookup %s\n", |
| __func__, ep93xx_dmas[i].con_id); |
| } |
| } |
| |
| static int __init ep93xx_clock_init(void) |
| { |
| u32 value; |
| struct clk_hw *hw; |
| unsigned long clk_pll1_rate; |
| unsigned long clk_f_rate; |
| unsigned long clk_h_rate; |
| unsigned long clk_p_rate; |
| unsigned long clk_pll2_rate; |
| unsigned int clk_f_div; |
| unsigned int clk_h_div; |
| unsigned int clk_p_div; |
| unsigned int clk_usb_div; |
| unsigned long clk_spi_div; |
| |
| hw = clk_hw_register_fixed_rate(NULL, "xtali", NULL, 0, EP93XX_EXT_CLK_RATE); |
| clk_hw_register_clkdev(hw, NULL, "xtali"); |
| |
| /* Determine the bootloader configured pll1 rate */ |
| value = __raw_readl(EP93XX_SYSCON_CLKSET1); |
| if (!(value & EP93XX_SYSCON_CLKSET1_NBYP1)) |
| clk_pll1_rate = EP93XX_EXT_CLK_RATE; |
| else |
| clk_pll1_rate = calc_pll_rate(EP93XX_EXT_CLK_RATE, value); |
| |
| hw = clk_hw_register_fixed_rate(NULL, "pll1", "xtali", 0, clk_pll1_rate); |
| clk_hw_register_clkdev(hw, NULL, "pll1"); |
| |
| /* Initialize the pll1 derived clocks */ |
| clk_f_div = fclk_divisors[(value >> 25) & 0x7]; |
| clk_h_div = hclk_divisors[(value >> 20) & 0x7]; |
| clk_p_div = pclk_divisors[(value >> 18) & 0x3]; |
| |
| hw = clk_hw_register_fixed_factor(NULL, "fclk", "pll1", 0, 1, clk_f_div); |
| clk_f_rate = clk_get_rate(hw->clk); |
| hw = clk_hw_register_fixed_factor(NULL, "hclk", "pll1", 0, 1, clk_h_div); |
| clk_h_rate = clk_get_rate(hw->clk); |
| hw = clk_hw_register_fixed_factor(NULL, "pclk", "hclk", 0, 1, clk_p_div); |
| clk_p_rate = clk_get_rate(hw->clk); |
| |
| clk_hw_register_clkdev(hw, "apb_pclk", NULL); |
| |
| ep93xx_dma_clock_init(); |
| |
| /* Determine the bootloader configured pll2 rate */ |
| value = __raw_readl(EP93XX_SYSCON_CLKSET2); |
| if (!(value & EP93XX_SYSCON_CLKSET2_NBYP2)) |
| clk_pll2_rate = EP93XX_EXT_CLK_RATE; |
| else if (value & EP93XX_SYSCON_CLKSET2_PLL2_EN) |
| clk_pll2_rate = calc_pll_rate(EP93XX_EXT_CLK_RATE, value); |
| else |
| clk_pll2_rate = 0; |
| |
| hw = clk_hw_register_fixed_rate(NULL, "pll2", "xtali", 0, clk_pll2_rate); |
| clk_hw_register_clkdev(hw, NULL, "pll2"); |
| |
| /* Initialize the pll2 derived clocks */ |
| /* |
| * These four bits set the divide ratio between the PLL2 |
| * output and the USB clock. |
| * 0000 - Divide by 1 |
| * 0001 - Divide by 2 |
| * 0010 - Divide by 3 |
| * 0011 - Divide by 4 |
| * 0100 - Divide by 5 |
| * 0101 - Divide by 6 |
| * 0110 - Divide by 7 |
| * 0111 - Divide by 8 |
| * 1000 - Divide by 9 |
| * 1001 - Divide by 10 |
| * 1010 - Divide by 11 |
| * 1011 - Divide by 12 |
| * 1100 - Divide by 13 |
| * 1101 - Divide by 14 |
| * 1110 - Divide by 15 |
| * 1111 - Divide by 1 |
| * On power-on-reset these bits are reset to 0000b. |
| */ |
| clk_usb_div = (((value >> 28) & 0xf) + 1); |
| hw = clk_hw_register_fixed_factor(NULL, "usb_clk", "pll2", 0, 1, clk_usb_div); |
| hw = clk_hw_register_gate(NULL, "ohci-platform", |
| "usb_clk", 0, |
| EP93XX_SYSCON_PWRCNT, |
| EP93XX_SYSCON_PWRCNT_USH_EN, |
| 0, |
| &clk_lock); |
| clk_hw_register_clkdev(hw, NULL, "ohci-platform"); |
| |
| /* |
| * EP93xx SSP clock rate was doubled in version E2. For more information |
| * see: |
| * http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf |
| */ |
| clk_spi_div = 1; |
| if (ep93xx_chip_revision() < EP93XX_CHIP_REV_E2) |
| clk_spi_div = 2; |
| hw = clk_hw_register_fixed_factor(NULL, "ep93xx-spi.0", "xtali", 0, 1, clk_spi_div); |
| clk_hw_register_clkdev(hw, NULL, "ep93xx-spi.0"); |
| |
| /* pwm clock */ |
| hw = clk_hw_register_fixed_factor(NULL, "pwm_clk", "xtali", 0, 1, 1); |
| clk_hw_register_clkdev(hw, "pwm_clk", NULL); |
| |
| pr_info("PLL1 running at %ld MHz, PLL2 at %ld MHz\n", |
| clk_pll1_rate / 1000000, clk_pll2_rate / 1000000); |
| pr_info("FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n", |
| clk_f_rate / 1000000, clk_h_rate / 1000000, |
| clk_p_rate / 1000000); |
| |
| ep93xx_uart_clock_init(); |
| |
| /* touchscreen/adc clock */ |
| hw = clk_hw_register_div("ep93xx-adc", |
| "xtali", |
| EP93XX_SYSCON_KEYTCHCLKDIV, |
| EP93XX_SYSCON_KEYTCHCLKDIV_TSEN, |
| EP93XX_SYSCON_KEYTCHCLKDIV_ADIV, |
| 1, |
| adc_divisors, |
| ARRAY_SIZE(adc_divisors)); |
| |
| clk_hw_register_clkdev(hw, NULL, "ep93xx-adc"); |
| |
| /* keypad clock */ |
| hw = clk_hw_register_div("ep93xx-keypad", |
| "xtali", |
| EP93XX_SYSCON_KEYTCHCLKDIV, |
| EP93XX_SYSCON_KEYTCHCLKDIV_KEN, |
| EP93XX_SYSCON_KEYTCHCLKDIV_KDIV, |
| 1, |
| adc_divisors, |
| ARRAY_SIZE(adc_divisors)); |
| |
| clk_hw_register_clkdev(hw, NULL, "ep93xx-keypad"); |
| |
| /* On reset PDIV and VDIV is set to zero, while PDIV zero |
| * means clock disable, VDIV shouldn't be zero. |
| * So i set both dividers to minimum. |
| */ |
| /* ENA - Enable CLK divider. */ |
| /* PDIV - 00 - Disable clock */ |
| /* VDIV - at least 2 */ |
| /* Check and enable video clk registers */ |
| value = __raw_readl(EP93XX_SYSCON_VIDCLKDIV); |
| value |= (1 << EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | 2; |
| ep93xx_syscon_swlocked_write(value, EP93XX_SYSCON_VIDCLKDIV); |
| |
| /* check and enable i2s clk registers */ |
| value = __raw_readl(EP93XX_SYSCON_I2SCLKDIV); |
| value |= (1 << EP93XX_SYSCON_CLKDIV_PDIV_SHIFT) | 2; |
| ep93xx_syscon_swlocked_write(value, EP93XX_SYSCON_I2SCLKDIV); |
| |
| /* video clk */ |
| hw = clk_hw_register_ddiv("ep93xx-fb", |
| EP93XX_SYSCON_VIDCLKDIV, |
| EP93XX_SYSCON_CLKDIV_ENABLE); |
| |
| clk_hw_register_clkdev(hw, NULL, "ep93xx-fb"); |
| |
| /* i2s clk */ |
| hw = clk_hw_register_ddiv("mclk", |
| EP93XX_SYSCON_I2SCLKDIV, |
| EP93XX_SYSCON_CLKDIV_ENABLE); |
| |
| clk_hw_register_clkdev(hw, "mclk", "ep93xx-i2s"); |
| |
| /* i2s sclk */ |
| #define EP93XX_I2SCLKDIV_SDIV_SHIFT 16 |
| #define EP93XX_I2SCLKDIV_SDIV_WIDTH 1 |
| hw = clk_hw_register_div("sclk", |
| "mclk", |
| EP93XX_SYSCON_I2SCLKDIV, |
| EP93XX_SYSCON_I2SCLKDIV_SENA, |
| EP93XX_I2SCLKDIV_SDIV_SHIFT, |
| EP93XX_I2SCLKDIV_SDIV_WIDTH, |
| sclk_divisors, |
| ARRAY_SIZE(sclk_divisors)); |
| |
| clk_hw_register_clkdev(hw, "sclk", "ep93xx-i2s"); |
| |
| /* i2s lrclk */ |
| #define EP93XX_I2SCLKDIV_LRDIV32_SHIFT 17 |
| #define EP93XX_I2SCLKDIV_LRDIV32_WIDTH 3 |
| hw = clk_hw_register_div("lrclk", |
| "sclk", |
| EP93XX_SYSCON_I2SCLKDIV, |
| EP93XX_SYSCON_I2SCLKDIV_SENA, |
| EP93XX_I2SCLKDIV_LRDIV32_SHIFT, |
| EP93XX_I2SCLKDIV_LRDIV32_WIDTH, |
| lrclk_divisors, |
| ARRAY_SIZE(lrclk_divisors)); |
| |
| clk_hw_register_clkdev(hw, "lrclk", "ep93xx-i2s"); |
| |
| return 0; |
| } |
| postcore_initcall(ep93xx_clock_init); |