| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Line 6 Pod HD |
| * |
| * Copyright (C) 2011 Stefan Hajnoczi <stefanha@gmail.com> |
| * Copyright (C) 2015 Andrej Krutak <dev@andree.sk> |
| * Copyright (C) 2017 Hans P. Moller <hmoller@uc.cl> |
| */ |
| |
| #include <linux/usb.h> |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <sound/core.h> |
| #include <sound/control.h> |
| #include <sound/pcm.h> |
| |
| #include "driver.h" |
| #include "pcm.h" |
| |
| #define PODHD_STARTUP_DELAY 500 |
| |
| enum { |
| LINE6_PODHD300, |
| LINE6_PODHD400, |
| LINE6_PODHD500, |
| LINE6_PODX3, |
| LINE6_PODX3LIVE, |
| LINE6_PODHD500X, |
| LINE6_PODHDDESKTOP |
| }; |
| |
| struct usb_line6_podhd { |
| /* Generic Line 6 USB data */ |
| struct usb_line6 line6; |
| |
| /* Serial number of device */ |
| u32 serial_number; |
| |
| /* Firmware version */ |
| int firmware_version; |
| |
| /* Monitor level */ |
| int monitor_level; |
| }; |
| |
| #define line6_to_podhd(x) container_of(x, struct usb_line6_podhd, line6) |
| |
| static const struct snd_ratden podhd_ratden = { |
| .num_min = 48000, |
| .num_max = 48000, |
| .num_step = 1, |
| .den = 1, |
| }; |
| |
| static struct line6_pcm_properties podhd_pcm_properties = { |
| .playback_hw = { |
| .info = (SNDRV_PCM_INFO_MMAP | |
| SNDRV_PCM_INFO_INTERLEAVED | |
| SNDRV_PCM_INFO_BLOCK_TRANSFER | |
| SNDRV_PCM_INFO_MMAP_VALID | |
| SNDRV_PCM_INFO_PAUSE | |
| SNDRV_PCM_INFO_SYNC_START), |
| .formats = SNDRV_PCM_FMTBIT_S24_3LE, |
| .rates = SNDRV_PCM_RATE_48000, |
| .rate_min = 48000, |
| .rate_max = 48000, |
| .channels_min = 2, |
| .channels_max = 2, |
| .buffer_bytes_max = 60000, |
| .period_bytes_min = 64, |
| .period_bytes_max = 8192, |
| .periods_min = 1, |
| .periods_max = 1024}, |
| .capture_hw = { |
| .info = (SNDRV_PCM_INFO_MMAP | |
| SNDRV_PCM_INFO_INTERLEAVED | |
| SNDRV_PCM_INFO_BLOCK_TRANSFER | |
| SNDRV_PCM_INFO_MMAP_VALID | |
| SNDRV_PCM_INFO_SYNC_START), |
| .formats = SNDRV_PCM_FMTBIT_S24_3LE, |
| .rates = SNDRV_PCM_RATE_48000, |
| .rate_min = 48000, |
| .rate_max = 48000, |
| .channels_min = 2, |
| .channels_max = 2, |
| .buffer_bytes_max = 60000, |
| .period_bytes_min = 64, |
| .period_bytes_max = 8192, |
| .periods_min = 1, |
| .periods_max = 1024}, |
| .rates = { |
| .nrats = 1, |
| .rats = &podhd_ratden}, |
| .bytes_per_channel = 3 /* SNDRV_PCM_FMTBIT_S24_3LE */ |
| }; |
| |
| static struct line6_pcm_properties podx3_pcm_properties = { |
| .playback_hw = { |
| .info = (SNDRV_PCM_INFO_MMAP | |
| SNDRV_PCM_INFO_INTERLEAVED | |
| SNDRV_PCM_INFO_BLOCK_TRANSFER | |
| SNDRV_PCM_INFO_MMAP_VALID | |
| SNDRV_PCM_INFO_PAUSE | |
| SNDRV_PCM_INFO_SYNC_START), |
| .formats = SNDRV_PCM_FMTBIT_S24_3LE, |
| .rates = SNDRV_PCM_RATE_48000, |
| .rate_min = 48000, |
| .rate_max = 48000, |
| .channels_min = 2, |
| .channels_max = 2, |
| .buffer_bytes_max = 60000, |
| .period_bytes_min = 64, |
| .period_bytes_max = 8192, |
| .periods_min = 1, |
| .periods_max = 1024}, |
| .capture_hw = { |
| .info = (SNDRV_PCM_INFO_MMAP | |
| SNDRV_PCM_INFO_INTERLEAVED | |
| SNDRV_PCM_INFO_BLOCK_TRANSFER | |
| SNDRV_PCM_INFO_MMAP_VALID | |
| SNDRV_PCM_INFO_SYNC_START), |
| .formats = SNDRV_PCM_FMTBIT_S24_3LE, |
| .rates = SNDRV_PCM_RATE_48000, |
| .rate_min = 48000, |
| .rate_max = 48000, |
| /* 1+2: Main signal (out), 3+4: Tone 1, |
| * 5+6: Tone 2, 7+8: raw |
| */ |
| .channels_min = 8, |
| .channels_max = 8, |
| .buffer_bytes_max = 60000, |
| .period_bytes_min = 64, |
| .period_bytes_max = 8192, |
| .periods_min = 1, |
| .periods_max = 1024}, |
| .rates = { |
| .nrats = 1, |
| .rats = &podhd_ratden}, |
| .bytes_per_channel = 3 /* SNDRV_PCM_FMTBIT_S24_3LE */ |
| }; |
| static struct usb_driver podhd_driver; |
| |
| static ssize_t serial_number_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct snd_card *card = dev_to_snd_card(dev); |
| struct usb_line6_podhd *pod = card->private_data; |
| |
| return sprintf(buf, "%u\n", pod->serial_number); |
| } |
| |
| static ssize_t firmware_version_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct snd_card *card = dev_to_snd_card(dev); |
| struct usb_line6_podhd *pod = card->private_data; |
| |
| return sprintf(buf, "%06x\n", pod->firmware_version); |
| } |
| |
| static DEVICE_ATTR_RO(firmware_version); |
| static DEVICE_ATTR_RO(serial_number); |
| |
| static struct attribute *podhd_dev_attrs[] = { |
| &dev_attr_firmware_version.attr, |
| &dev_attr_serial_number.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group podhd_dev_attr_group = { |
| .name = "podhd", |
| .attrs = podhd_dev_attrs, |
| }; |
| |
| /* |
| * POD X3 startup procedure. |
| * |
| * May be compatible with other POD HD's, since it's also similar to the |
| * previous POD setup. In any case, it doesn't seem to be required for the |
| * audio nor bulk interfaces to work. |
| */ |
| |
| static int podhd_dev_start(struct usb_line6_podhd *pod) |
| { |
| int ret; |
| u8 *init_bytes; |
| int i; |
| struct usb_device *usbdev = pod->line6.usbdev; |
| |
| init_bytes = kmalloc(8, GFP_KERNEL); |
| if (!init_bytes) |
| return -ENOMEM; |
| |
| ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0), |
| 0x67, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, |
| 0x11, 0, |
| NULL, 0, LINE6_TIMEOUT * HZ); |
| if (ret < 0) { |
| dev_err(pod->line6.ifcdev, "read request failed (error %d)\n", ret); |
| goto exit; |
| } |
| |
| /* NOTE: looks like some kind of ping message */ |
| ret = usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0), 0x67, |
| USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, |
| 0x11, 0x0, |
| init_bytes, 3, LINE6_TIMEOUT * HZ); |
| if (ret < 0) { |
| dev_err(pod->line6.ifcdev, |
| "receive length failed (error %d)\n", ret); |
| goto exit; |
| } |
| |
| pod->firmware_version = |
| (init_bytes[0] << 16) | (init_bytes[1] << 8) | (init_bytes[2] << 0); |
| |
| for (i = 0; i <= 16; i++) { |
| ret = line6_read_data(&pod->line6, 0xf000 + 0x08 * i, init_bytes, 8); |
| if (ret < 0) |
| goto exit; |
| } |
| |
| ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0), |
| USB_REQ_SET_FEATURE, |
| USB_TYPE_STANDARD | USB_RECIP_DEVICE | USB_DIR_OUT, |
| 1, 0, |
| NULL, 0, LINE6_TIMEOUT * HZ); |
| exit: |
| kfree(init_bytes); |
| return ret; |
| } |
| |
| static void podhd_startup(struct usb_line6 *line6) |
| { |
| struct usb_line6_podhd *pod = line6_to_podhd(line6); |
| |
| podhd_dev_start(pod); |
| line6_read_serial_number(&pod->line6, &pod->serial_number); |
| if (snd_card_register(line6->card)) |
| dev_err(line6->ifcdev, "Failed to register POD HD card.\n"); |
| } |
| |
| static void podhd_disconnect(struct usb_line6 *line6) |
| { |
| struct usb_line6_podhd *pod = line6_to_podhd(line6); |
| |
| if (pod->line6.properties->capabilities & LINE6_CAP_CONTROL_INFO) { |
| struct usb_interface *intf; |
| |
| intf = usb_ifnum_to_if(line6->usbdev, |
| pod->line6.properties->ctrl_if); |
| if (intf) |
| usb_driver_release_interface(&podhd_driver, intf); |
| } |
| } |
| |
| static const unsigned int float_zero_to_one_lookup[] = { |
| 0x00000000, 0x3c23d70a, 0x3ca3d70a, 0x3cf5c28f, 0x3d23d70a, 0x3d4ccccd, |
| 0x3d75c28f, 0x3d8f5c29, 0x3da3d70a, 0x3db851ec, 0x3dcccccd, 0x3de147ae, |
| 0x3df5c28f, 0x3e051eb8, 0x3e0f5c29, 0x3e19999a, 0x3e23d70a, 0x3e2e147b, |
| 0x3e3851ec, 0x3e428f5c, 0x3e4ccccd, 0x3e570a3d, 0x3e6147ae, 0x3e6b851f, |
| 0x3e75c28f, 0x3e800000, 0x3e851eb8, 0x3e8a3d71, 0x3e8f5c29, 0x3e947ae1, |
| 0x3e99999a, 0x3e9eb852, 0x3ea3d70a, 0x3ea8f5c3, 0x3eae147b, 0x3eb33333, |
| 0x3eb851ec, 0x3ebd70a4, 0x3ec28f5c, 0x3ec7ae14, 0x3ecccccd, 0x3ed1eb85, |
| 0x3ed70a3d, 0x3edc28f6, 0x3ee147ae, 0x3ee66666, 0x3eeb851f, 0x3ef0a3d7, |
| 0x3ef5c28f, 0x3efae148, 0x3f000000, 0x3f028f5c, 0x3f051eb8, 0x3f07ae14, |
| 0x3f0a3d71, 0x3f0ccccd, 0x3f0f5c29, 0x3f11eb85, 0x3f147ae1, 0x3f170a3d, |
| 0x3f19999a, 0x3f1c28f6, 0x3f1eb852, 0x3f2147ae, 0x3f23d70a, 0x3f266666, |
| 0x3f28f5c3, 0x3f2b851f, 0x3f2e147b, 0x3f30a3d7, 0x3f333333, 0x3f35c28f, |
| 0x3f3851ec, 0x3f3ae148, 0x3f3d70a4, 0x3f400000, 0x3f428f5c, 0x3f451eb8, |
| 0x3f47ae14, 0x3f4a3d71, 0x3f4ccccd, 0x3f4f5c29, 0x3f51eb85, 0x3f547ae1, |
| 0x3f570a3d, 0x3f59999a, 0x3f5c28f6, 0x3f5eb852, 0x3f6147ae, 0x3f63d70a, |
| 0x3f666666, 0x3f68f5c3, 0x3f6b851f, 0x3f6e147b, 0x3f70a3d7, 0x3f733333, |
| 0x3f75c28f, 0x3f7851ec, 0x3f7ae148, 0x3f7d70a4, 0x3f800000 |
| }; |
| |
| static void podhd_set_monitor_level(struct usb_line6_podhd *podhd, int value) |
| { |
| unsigned int fl; |
| static const unsigned char msg[16] = { |
| /* Chunk is 0xc bytes (without first word) */ |
| 0x0c, 0x00, |
| /* First chunk in the message */ |
| 0x01, 0x00, |
| /* Message size is 2 4-byte words */ |
| 0x02, 0x00, |
| /* Unknown */ |
| 0x04, 0x41, |
| /* Unknown */ |
| 0x04, 0x00, 0x13, 0x00, |
| /* Volume, LE float32, 0.0 - 1.0 */ |
| 0x00, 0x00, 0x00, 0x00 |
| }; |
| unsigned char *buf; |
| |
| buf = kmemdup(msg, sizeof(msg), GFP_KERNEL); |
| if (!buf) |
| return; |
| |
| if (value < 0) |
| value = 0; |
| |
| if (value >= ARRAY_SIZE(float_zero_to_one_lookup)) |
| value = ARRAY_SIZE(float_zero_to_one_lookup) - 1; |
| |
| fl = float_zero_to_one_lookup[value]; |
| |
| buf[12] = (fl >> 0) & 0xff; |
| buf[13] = (fl >> 8) & 0xff; |
| buf[14] = (fl >> 16) & 0xff; |
| buf[15] = (fl >> 24) & 0xff; |
| |
| line6_send_raw_message(&podhd->line6, buf, sizeof(msg)); |
| kfree(buf); |
| |
| podhd->monitor_level = value; |
| } |
| |
| /* control info callback */ |
| static int snd_podhd_control_monitor_info(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; |
| uinfo->count = 1; |
| uinfo->value.integer.min = 0; |
| uinfo->value.integer.max = 100; |
| uinfo->value.integer.step = 1; |
| return 0; |
| } |
| |
| /* control get callback */ |
| static int snd_podhd_control_monitor_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol); |
| struct usb_line6_podhd *podhd = line6_to_podhd(line6pcm->line6); |
| |
| ucontrol->value.integer.value[0] = podhd->monitor_level; |
| return 0; |
| } |
| |
| /* control put callback */ |
| static int snd_podhd_control_monitor_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol); |
| struct usb_line6_podhd *podhd = line6_to_podhd(line6pcm->line6); |
| |
| if (ucontrol->value.integer.value[0] == podhd->monitor_level) |
| return 0; |
| |
| podhd_set_monitor_level(podhd, ucontrol->value.integer.value[0]); |
| return 1; |
| } |
| |
| /* control definition */ |
| static const struct snd_kcontrol_new podhd_control_monitor = { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "Monitor Playback Volume", |
| .index = 0, |
| .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, |
| .info = snd_podhd_control_monitor_info, |
| .get = snd_podhd_control_monitor_get, |
| .put = snd_podhd_control_monitor_put |
| }; |
| |
| /* |
| Try to init POD HD device. |
| */ |
| static int podhd_init(struct usb_line6 *line6, |
| const struct usb_device_id *id) |
| { |
| int err; |
| struct usb_line6_podhd *pod = line6_to_podhd(line6); |
| struct usb_interface *intf; |
| |
| line6->disconnect = podhd_disconnect; |
| line6->startup = podhd_startup; |
| |
| if (pod->line6.properties->capabilities & LINE6_CAP_CONTROL) { |
| /* claim the data interface */ |
| intf = usb_ifnum_to_if(line6->usbdev, |
| pod->line6.properties->ctrl_if); |
| if (!intf) { |
| dev_err(pod->line6.ifcdev, "interface %d not found\n", |
| pod->line6.properties->ctrl_if); |
| return -ENODEV; |
| } |
| |
| err = usb_driver_claim_interface(&podhd_driver, intf, NULL); |
| if (err != 0) { |
| dev_err(pod->line6.ifcdev, "can't claim interface %d, error %d\n", |
| pod->line6.properties->ctrl_if, err); |
| return err; |
| } |
| } |
| |
| if (pod->line6.properties->capabilities & LINE6_CAP_CONTROL_INFO) { |
| /* create sysfs entries: */ |
| err = snd_card_add_dev_attr(line6->card, &podhd_dev_attr_group); |
| if (err < 0) |
| return err; |
| } |
| |
| if (pod->line6.properties->capabilities & LINE6_CAP_PCM) { |
| /* initialize PCM subsystem: */ |
| err = line6_init_pcm(line6, |
| (id->driver_info == LINE6_PODX3 || |
| id->driver_info == LINE6_PODX3LIVE) ? &podx3_pcm_properties : |
| &podhd_pcm_properties); |
| if (err < 0) |
| return err; |
| } |
| |
| if (pod->line6.properties->capabilities & LINE6_CAP_HWMON_CTL) { |
| podhd_set_monitor_level(pod, 100); |
| err = snd_ctl_add(line6->card, |
| snd_ctl_new1(&podhd_control_monitor, |
| line6->line6pcm)); |
| if (err < 0) |
| return err; |
| } |
| |
| if (!(pod->line6.properties->capabilities & LINE6_CAP_CONTROL_INFO)) { |
| /* register USB audio system directly */ |
| return snd_card_register(line6->card); |
| } |
| |
| /* init device and delay registering */ |
| schedule_delayed_work(&line6->startup_work, |
| msecs_to_jiffies(PODHD_STARTUP_DELAY)); |
| return 0; |
| } |
| |
| #define LINE6_DEVICE(prod) USB_DEVICE(0x0e41, prod) |
| #define LINE6_IF_NUM(prod, n) USB_DEVICE_INTERFACE_NUMBER(0x0e41, prod, n) |
| |
| /* table of devices that work with this driver */ |
| static const struct usb_device_id podhd_id_table[] = { |
| /* TODO: no need to alloc data interfaces when only audio is used */ |
| { LINE6_DEVICE(0x5057), .driver_info = LINE6_PODHD300 }, |
| { LINE6_DEVICE(0x5058), .driver_info = LINE6_PODHD400 }, |
| { LINE6_IF_NUM(0x414D, 0), .driver_info = LINE6_PODHD500 }, |
| { LINE6_IF_NUM(0x414A, 0), .driver_info = LINE6_PODX3 }, |
| { LINE6_IF_NUM(0x414B, 0), .driver_info = LINE6_PODX3LIVE }, |
| { LINE6_IF_NUM(0x4159, 0), .driver_info = LINE6_PODHD500X }, |
| { LINE6_IF_NUM(0x4156, 0), .driver_info = LINE6_PODHDDESKTOP }, |
| {} |
| }; |
| |
| MODULE_DEVICE_TABLE(usb, podhd_id_table); |
| |
| static const struct line6_properties podhd_properties_table[] = { |
| [LINE6_PODHD300] = { |
| .id = "PODHD300", |
| .name = "POD HD300", |
| .capabilities = LINE6_CAP_PCM |
| | LINE6_CAP_HWMON, |
| .altsetting = 5, |
| .ep_ctrl_r = 0x84, |
| .ep_ctrl_w = 0x03, |
| .ep_audio_r = 0x82, |
| .ep_audio_w = 0x01, |
| }, |
| [LINE6_PODHD400] = { |
| .id = "PODHD400", |
| .name = "POD HD400", |
| .capabilities = LINE6_CAP_PCM |
| | LINE6_CAP_HWMON, |
| .altsetting = 5, |
| .ep_ctrl_r = 0x84, |
| .ep_ctrl_w = 0x03, |
| .ep_audio_r = 0x82, |
| .ep_audio_w = 0x01, |
| }, |
| [LINE6_PODHD500] = { |
| .id = "PODHD500", |
| .name = "POD HD500", |
| .capabilities = LINE6_CAP_PCM | LINE6_CAP_CONTROL |
| | LINE6_CAP_HWMON | LINE6_CAP_HWMON_CTL, |
| .altsetting = 1, |
| .ctrl_if = 1, |
| .ep_ctrl_r = 0x81, |
| .ep_ctrl_w = 0x01, |
| .ep_audio_r = 0x86, |
| .ep_audio_w = 0x02, |
| }, |
| [LINE6_PODX3] = { |
| .id = "PODX3", |
| .name = "POD X3", |
| .capabilities = LINE6_CAP_CONTROL | LINE6_CAP_CONTROL_INFO |
| | LINE6_CAP_PCM | LINE6_CAP_HWMON | LINE6_CAP_IN_NEEDS_OUT, |
| .altsetting = 1, |
| .ep_ctrl_r = 0x81, |
| .ep_ctrl_w = 0x01, |
| .ctrl_if = 1, |
| .ep_audio_r = 0x86, |
| .ep_audio_w = 0x02, |
| }, |
| [LINE6_PODX3LIVE] = { |
| .id = "PODX3LIVE", |
| .name = "POD X3 LIVE", |
| .capabilities = LINE6_CAP_CONTROL | LINE6_CAP_CONTROL_INFO |
| | LINE6_CAP_PCM | LINE6_CAP_HWMON | LINE6_CAP_IN_NEEDS_OUT, |
| .altsetting = 1, |
| .ep_ctrl_r = 0x81, |
| .ep_ctrl_w = 0x01, |
| .ctrl_if = 1, |
| .ep_audio_r = 0x86, |
| .ep_audio_w = 0x02, |
| }, |
| [LINE6_PODHD500X] = { |
| .id = "PODHD500X", |
| .name = "POD HD500X", |
| .capabilities = LINE6_CAP_CONTROL |
| | LINE6_CAP_PCM | LINE6_CAP_HWMON, |
| .altsetting = 1, |
| .ep_ctrl_r = 0x81, |
| .ep_ctrl_w = 0x01, |
| .ctrl_if = 1, |
| .ep_audio_r = 0x86, |
| .ep_audio_w = 0x02, |
| }, |
| [LINE6_PODHDDESKTOP] = { |
| .id = "PODHDDESKTOP", |
| .name = "POD HDDESKTOP", |
| .capabilities = LINE6_CAP_CONTROL |
| | LINE6_CAP_PCM | LINE6_CAP_HWMON, |
| .altsetting = 1, |
| .ep_ctrl_r = 0x81, |
| .ep_ctrl_w = 0x01, |
| .ctrl_if = 1, |
| .ep_audio_r = 0x86, |
| .ep_audio_w = 0x02, |
| }, |
| }; |
| |
| /* |
| Probe USB device. |
| */ |
| static int podhd_probe(struct usb_interface *interface, |
| const struct usb_device_id *id) |
| { |
| return line6_probe(interface, id, "Line6-PODHD", |
| &podhd_properties_table[id->driver_info], |
| podhd_init, sizeof(struct usb_line6_podhd)); |
| } |
| |
| static struct usb_driver podhd_driver = { |
| .name = KBUILD_MODNAME, |
| .probe = podhd_probe, |
| .disconnect = line6_disconnect, |
| #ifdef CONFIG_PM |
| .suspend = line6_suspend, |
| .resume = line6_resume, |
| .reset_resume = line6_resume, |
| #endif |
| .id_table = podhd_id_table, |
| }; |
| |
| module_usb_driver(podhd_driver); |
| |
| MODULE_DESCRIPTION("Line 6 PODHD USB driver"); |
| MODULE_LICENSE("GPL"); |