|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* | 
|  | * NVMe I/O command implementation. | 
|  | * Copyright (c) 2015-2016 HGST, a Western Digital Company. | 
|  | */ | 
|  | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | 
|  | #include <linux/blkdev.h> | 
|  | #include <linux/blk-integrity.h> | 
|  | #include <linux/memremap.h> | 
|  | #include <linux/module.h> | 
|  | #include "nvmet.h" | 
|  |  | 
|  | void nvmet_bdev_set_limits(struct block_device *bdev, struct nvme_id_ns *id) | 
|  | { | 
|  | /* Logical blocks per physical block, 0's based. */ | 
|  | const __le16 lpp0b = to0based(bdev_physical_block_size(bdev) / | 
|  | bdev_logical_block_size(bdev)); | 
|  |  | 
|  | /* | 
|  | * For NVMe 1.2 and later, bit 1 indicates that the fields NAWUN, | 
|  | * NAWUPF, and NACWU are defined for this namespace and should be | 
|  | * used by the host for this namespace instead of the AWUN, AWUPF, | 
|  | * and ACWU fields in the Identify Controller data structure. If | 
|  | * any of these fields are zero that means that the corresponding | 
|  | * field from the identify controller data structure should be used. | 
|  | */ | 
|  | id->nsfeat |= 1 << 1; | 
|  | id->nawun = lpp0b; | 
|  | id->nawupf = lpp0b; | 
|  | id->nacwu = lpp0b; | 
|  |  | 
|  | /* | 
|  | * Bit 4 indicates that the fields NPWG, NPWA, NPDG, NPDA, and | 
|  | * NOWS are defined for this namespace and should be used by | 
|  | * the host for I/O optimization. | 
|  | */ | 
|  | id->nsfeat |= 1 << 4; | 
|  | /* NPWG = Namespace Preferred Write Granularity. 0's based */ | 
|  | id->npwg = lpp0b; | 
|  | /* NPWA = Namespace Preferred Write Alignment. 0's based */ | 
|  | id->npwa = id->npwg; | 
|  | /* NPDG = Namespace Preferred Deallocate Granularity. 0's based */ | 
|  | id->npdg = to0based(bdev_discard_granularity(bdev) / | 
|  | bdev_logical_block_size(bdev)); | 
|  | /* NPDG = Namespace Preferred Deallocate Alignment */ | 
|  | id->npda = id->npdg; | 
|  | /* NOWS = Namespace Optimal Write Size */ | 
|  | id->nows = to0based(bdev_io_opt(bdev) / bdev_logical_block_size(bdev)); | 
|  | } | 
|  |  | 
|  | void nvmet_bdev_ns_disable(struct nvmet_ns *ns) | 
|  | { | 
|  | if (ns->bdev_file) { | 
|  | fput(ns->bdev_file); | 
|  | ns->bdev = NULL; | 
|  | ns->bdev_file = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void nvmet_bdev_ns_enable_integrity(struct nvmet_ns *ns) | 
|  | { | 
|  | struct blk_integrity *bi = bdev_get_integrity(ns->bdev); | 
|  |  | 
|  | if (bi) { | 
|  | ns->metadata_size = bi->tuple_size; | 
|  | if (bi->profile == &t10_pi_type1_crc) | 
|  | ns->pi_type = NVME_NS_DPS_PI_TYPE1; | 
|  | else if (bi->profile == &t10_pi_type3_crc) | 
|  | ns->pi_type = NVME_NS_DPS_PI_TYPE3; | 
|  | else | 
|  | /* Unsupported metadata type */ | 
|  | ns->metadata_size = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | int nvmet_bdev_ns_enable(struct nvmet_ns *ns) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | /* | 
|  | * When buffered_io namespace attribute is enabled that means user want | 
|  | * this block device to be used as a file, so block device can take | 
|  | * an advantage of cache. | 
|  | */ | 
|  | if (ns->buffered_io) | 
|  | return -ENOTBLK; | 
|  |  | 
|  | ns->bdev_file = bdev_file_open_by_path(ns->device_path, | 
|  | BLK_OPEN_READ | BLK_OPEN_WRITE, NULL, NULL); | 
|  | if (IS_ERR(ns->bdev_file)) { | 
|  | ret = PTR_ERR(ns->bdev_file); | 
|  | if (ret != -ENOTBLK) { | 
|  | pr_err("failed to open block device %s: (%d)\n", | 
|  | ns->device_path, ret); | 
|  | } | 
|  | ns->bdev_file = NULL; | 
|  | return ret; | 
|  | } | 
|  | ns->bdev = file_bdev(ns->bdev_file); | 
|  | ns->size = bdev_nr_bytes(ns->bdev); | 
|  | ns->blksize_shift = blksize_bits(bdev_logical_block_size(ns->bdev)); | 
|  |  | 
|  | ns->pi_type = 0; | 
|  | ns->metadata_size = 0; | 
|  | if (IS_ENABLED(CONFIG_BLK_DEV_INTEGRITY_T10)) | 
|  | nvmet_bdev_ns_enable_integrity(ns); | 
|  |  | 
|  | if (bdev_is_zoned(ns->bdev)) { | 
|  | if (!nvmet_bdev_zns_enable(ns)) { | 
|  | nvmet_bdev_ns_disable(ns); | 
|  | return -EINVAL; | 
|  | } | 
|  | ns->csi = NVME_CSI_ZNS; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void nvmet_bdev_ns_revalidate(struct nvmet_ns *ns) | 
|  | { | 
|  | ns->size = bdev_nr_bytes(ns->bdev); | 
|  | } | 
|  |  | 
|  | u16 blk_to_nvme_status(struct nvmet_req *req, blk_status_t blk_sts) | 
|  | { | 
|  | u16 status = NVME_SC_SUCCESS; | 
|  |  | 
|  | if (likely(blk_sts == BLK_STS_OK)) | 
|  | return status; | 
|  | /* | 
|  | * Right now there exists M : 1 mapping between block layer error | 
|  | * to the NVMe status code (see nvme_error_status()). For consistency, | 
|  | * when we reverse map we use most appropriate NVMe Status code from | 
|  | * the group of the NVMe staus codes used in the nvme_error_status(). | 
|  | */ | 
|  | switch (blk_sts) { | 
|  | case BLK_STS_NOSPC: | 
|  | status = NVME_SC_CAP_EXCEEDED | NVME_SC_DNR; | 
|  | req->error_loc = offsetof(struct nvme_rw_command, length); | 
|  | break; | 
|  | case BLK_STS_TARGET: | 
|  | status = NVME_SC_LBA_RANGE | NVME_SC_DNR; | 
|  | req->error_loc = offsetof(struct nvme_rw_command, slba); | 
|  | break; | 
|  | case BLK_STS_NOTSUPP: | 
|  | req->error_loc = offsetof(struct nvme_common_command, opcode); | 
|  | switch (req->cmd->common.opcode) { | 
|  | case nvme_cmd_dsm: | 
|  | case nvme_cmd_write_zeroes: | 
|  | status = NVME_SC_ONCS_NOT_SUPPORTED | NVME_SC_DNR; | 
|  | break; | 
|  | default: | 
|  | status = NVME_SC_INVALID_OPCODE | NVME_SC_DNR; | 
|  | } | 
|  | break; | 
|  | case BLK_STS_MEDIUM: | 
|  | status = NVME_SC_ACCESS_DENIED; | 
|  | req->error_loc = offsetof(struct nvme_rw_command, nsid); | 
|  | break; | 
|  | case BLK_STS_IOERR: | 
|  | default: | 
|  | status = NVME_SC_INTERNAL | NVME_SC_DNR; | 
|  | req->error_loc = offsetof(struct nvme_common_command, opcode); | 
|  | } | 
|  |  | 
|  | switch (req->cmd->common.opcode) { | 
|  | case nvme_cmd_read: | 
|  | case nvme_cmd_write: | 
|  | req->error_slba = le64_to_cpu(req->cmd->rw.slba); | 
|  | break; | 
|  | case nvme_cmd_write_zeroes: | 
|  | req->error_slba = | 
|  | le64_to_cpu(req->cmd->write_zeroes.slba); | 
|  | break; | 
|  | default: | 
|  | req->error_slba = 0; | 
|  | } | 
|  | return status; | 
|  | } | 
|  |  | 
|  | static void nvmet_bio_done(struct bio *bio) | 
|  | { | 
|  | struct nvmet_req *req = bio->bi_private; | 
|  |  | 
|  | nvmet_req_complete(req, blk_to_nvme_status(req, bio->bi_status)); | 
|  | nvmet_req_bio_put(req, bio); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_BLK_DEV_INTEGRITY | 
|  | static int nvmet_bdev_alloc_bip(struct nvmet_req *req, struct bio *bio, | 
|  | struct sg_mapping_iter *miter) | 
|  | { | 
|  | struct blk_integrity *bi; | 
|  | struct bio_integrity_payload *bip; | 
|  | int rc; | 
|  | size_t resid, len; | 
|  |  | 
|  | bi = bdev_get_integrity(req->ns->bdev); | 
|  | if (unlikely(!bi)) { | 
|  | pr_err("Unable to locate bio_integrity\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | bip = bio_integrity_alloc(bio, GFP_NOIO, | 
|  | bio_max_segs(req->metadata_sg_cnt)); | 
|  | if (IS_ERR(bip)) { | 
|  | pr_err("Unable to allocate bio_integrity_payload\n"); | 
|  | return PTR_ERR(bip); | 
|  | } | 
|  |  | 
|  | /* virtual start sector must be in integrity interval units */ | 
|  | bip_set_seed(bip, bio->bi_iter.bi_sector >> | 
|  | (bi->interval_exp - SECTOR_SHIFT)); | 
|  |  | 
|  | resid = bio_integrity_bytes(bi, bio_sectors(bio)); | 
|  | while (resid > 0 && sg_miter_next(miter)) { | 
|  | len = min_t(size_t, miter->length, resid); | 
|  | rc = bio_integrity_add_page(bio, miter->page, len, | 
|  | offset_in_page(miter->addr)); | 
|  | if (unlikely(rc != len)) { | 
|  | pr_err("bio_integrity_add_page() failed; %d\n", rc); | 
|  | sg_miter_stop(miter); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | resid -= len; | 
|  | if (len < miter->length) | 
|  | miter->consumed -= miter->length - len; | 
|  | } | 
|  | sg_miter_stop(miter); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | #else | 
|  | static int nvmet_bdev_alloc_bip(struct nvmet_req *req, struct bio *bio, | 
|  | struct sg_mapping_iter *miter) | 
|  | { | 
|  | return -EINVAL; | 
|  | } | 
|  | #endif /* CONFIG_BLK_DEV_INTEGRITY */ | 
|  |  | 
|  | static void nvmet_bdev_execute_rw(struct nvmet_req *req) | 
|  | { | 
|  | unsigned int sg_cnt = req->sg_cnt; | 
|  | struct bio *bio; | 
|  | struct scatterlist *sg; | 
|  | struct blk_plug plug; | 
|  | sector_t sector; | 
|  | blk_opf_t opf; | 
|  | int i, rc; | 
|  | struct sg_mapping_iter prot_miter; | 
|  | unsigned int iter_flags; | 
|  | unsigned int total_len = nvmet_rw_data_len(req) + req->metadata_len; | 
|  |  | 
|  | if (!nvmet_check_transfer_len(req, total_len)) | 
|  | return; | 
|  |  | 
|  | if (!req->sg_cnt) { | 
|  | nvmet_req_complete(req, 0); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (req->cmd->rw.opcode == nvme_cmd_write) { | 
|  | opf = REQ_OP_WRITE | REQ_SYNC | REQ_IDLE; | 
|  | if (req->cmd->rw.control & cpu_to_le16(NVME_RW_FUA)) | 
|  | opf |= REQ_FUA; | 
|  | iter_flags = SG_MITER_TO_SG; | 
|  | } else { | 
|  | opf = REQ_OP_READ; | 
|  | iter_flags = SG_MITER_FROM_SG; | 
|  | } | 
|  |  | 
|  | if (is_pci_p2pdma_page(sg_page(req->sg))) | 
|  | opf |= REQ_NOMERGE; | 
|  |  | 
|  | sector = nvmet_lba_to_sect(req->ns, req->cmd->rw.slba); | 
|  |  | 
|  | if (nvmet_use_inline_bvec(req)) { | 
|  | bio = &req->b.inline_bio; | 
|  | bio_init(bio, req->ns->bdev, req->inline_bvec, | 
|  | ARRAY_SIZE(req->inline_bvec), opf); | 
|  | } else { | 
|  | bio = bio_alloc(req->ns->bdev, bio_max_segs(sg_cnt), opf, | 
|  | GFP_KERNEL); | 
|  | } | 
|  | bio->bi_iter.bi_sector = sector; | 
|  | bio->bi_private = req; | 
|  | bio->bi_end_io = nvmet_bio_done; | 
|  |  | 
|  | blk_start_plug(&plug); | 
|  | if (req->metadata_len) | 
|  | sg_miter_start(&prot_miter, req->metadata_sg, | 
|  | req->metadata_sg_cnt, iter_flags); | 
|  |  | 
|  | for_each_sg(req->sg, sg, req->sg_cnt, i) { | 
|  | while (bio_add_page(bio, sg_page(sg), sg->length, sg->offset) | 
|  | != sg->length) { | 
|  | struct bio *prev = bio; | 
|  |  | 
|  | if (req->metadata_len) { | 
|  | rc = nvmet_bdev_alloc_bip(req, bio, | 
|  | &prot_miter); | 
|  | if (unlikely(rc)) { | 
|  | bio_io_error(bio); | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | bio = bio_alloc(req->ns->bdev, bio_max_segs(sg_cnt), | 
|  | opf, GFP_KERNEL); | 
|  | bio->bi_iter.bi_sector = sector; | 
|  |  | 
|  | bio_chain(bio, prev); | 
|  | submit_bio(prev); | 
|  | } | 
|  |  | 
|  | sector += sg->length >> 9; | 
|  | sg_cnt--; | 
|  | } | 
|  |  | 
|  | if (req->metadata_len) { | 
|  | rc = nvmet_bdev_alloc_bip(req, bio, &prot_miter); | 
|  | if (unlikely(rc)) { | 
|  | bio_io_error(bio); | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | submit_bio(bio); | 
|  | blk_finish_plug(&plug); | 
|  | } | 
|  |  | 
|  | static void nvmet_bdev_execute_flush(struct nvmet_req *req) | 
|  | { | 
|  | struct bio *bio = &req->b.inline_bio; | 
|  |  | 
|  | if (!bdev_write_cache(req->ns->bdev)) { | 
|  | nvmet_req_complete(req, NVME_SC_SUCCESS); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (!nvmet_check_transfer_len(req, 0)) | 
|  | return; | 
|  |  | 
|  | bio_init(bio, req->ns->bdev, req->inline_bvec, | 
|  | ARRAY_SIZE(req->inline_bvec), REQ_OP_WRITE | REQ_PREFLUSH); | 
|  | bio->bi_private = req; | 
|  | bio->bi_end_io = nvmet_bio_done; | 
|  |  | 
|  | submit_bio(bio); | 
|  | } | 
|  |  | 
|  | u16 nvmet_bdev_flush(struct nvmet_req *req) | 
|  | { | 
|  | if (!bdev_write_cache(req->ns->bdev)) | 
|  | return 0; | 
|  |  | 
|  | if (blkdev_issue_flush(req->ns->bdev)) | 
|  | return NVME_SC_INTERNAL | NVME_SC_DNR; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static u16 nvmet_bdev_discard_range(struct nvmet_req *req, | 
|  | struct nvme_dsm_range *range, struct bio **bio) | 
|  | { | 
|  | struct nvmet_ns *ns = req->ns; | 
|  | int ret; | 
|  |  | 
|  | ret = __blkdev_issue_discard(ns->bdev, | 
|  | nvmet_lba_to_sect(ns, range->slba), | 
|  | le32_to_cpu(range->nlb) << (ns->blksize_shift - 9), | 
|  | GFP_KERNEL, bio); | 
|  | if (ret && ret != -EOPNOTSUPP) { | 
|  | req->error_slba = le64_to_cpu(range->slba); | 
|  | return errno_to_nvme_status(req, ret); | 
|  | } | 
|  | return NVME_SC_SUCCESS; | 
|  | } | 
|  |  | 
|  | static void nvmet_bdev_execute_discard(struct nvmet_req *req) | 
|  | { | 
|  | struct nvme_dsm_range range; | 
|  | struct bio *bio = NULL; | 
|  | int i; | 
|  | u16 status; | 
|  |  | 
|  | for (i = 0; i <= le32_to_cpu(req->cmd->dsm.nr); i++) { | 
|  | status = nvmet_copy_from_sgl(req, i * sizeof(range), &range, | 
|  | sizeof(range)); | 
|  | if (status) | 
|  | break; | 
|  |  | 
|  | status = nvmet_bdev_discard_range(req, &range, &bio); | 
|  | if (status) | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (bio) { | 
|  | bio->bi_private = req; | 
|  | bio->bi_end_io = nvmet_bio_done; | 
|  | if (status) | 
|  | bio_io_error(bio); | 
|  | else | 
|  | submit_bio(bio); | 
|  | } else { | 
|  | nvmet_req_complete(req, status); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void nvmet_bdev_execute_dsm(struct nvmet_req *req) | 
|  | { | 
|  | if (!nvmet_check_data_len_lte(req, nvmet_dsm_len(req))) | 
|  | return; | 
|  |  | 
|  | switch (le32_to_cpu(req->cmd->dsm.attributes)) { | 
|  | case NVME_DSMGMT_AD: | 
|  | nvmet_bdev_execute_discard(req); | 
|  | return; | 
|  | case NVME_DSMGMT_IDR: | 
|  | case NVME_DSMGMT_IDW: | 
|  | default: | 
|  | /* Not supported yet */ | 
|  | nvmet_req_complete(req, 0); | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void nvmet_bdev_execute_write_zeroes(struct nvmet_req *req) | 
|  | { | 
|  | struct nvme_write_zeroes_cmd *write_zeroes = &req->cmd->write_zeroes; | 
|  | struct bio *bio = NULL; | 
|  | sector_t sector; | 
|  | sector_t nr_sector; | 
|  | int ret; | 
|  |  | 
|  | if (!nvmet_check_transfer_len(req, 0)) | 
|  | return; | 
|  |  | 
|  | sector = nvmet_lba_to_sect(req->ns, write_zeroes->slba); | 
|  | nr_sector = (((sector_t)le16_to_cpu(write_zeroes->length) + 1) << | 
|  | (req->ns->blksize_shift - 9)); | 
|  |  | 
|  | ret = __blkdev_issue_zeroout(req->ns->bdev, sector, nr_sector, | 
|  | GFP_KERNEL, &bio, 0); | 
|  | if (bio) { | 
|  | bio->bi_private = req; | 
|  | bio->bi_end_io = nvmet_bio_done; | 
|  | submit_bio(bio); | 
|  | } else { | 
|  | nvmet_req_complete(req, errno_to_nvme_status(req, ret)); | 
|  | } | 
|  | } | 
|  |  | 
|  | u16 nvmet_bdev_parse_io_cmd(struct nvmet_req *req) | 
|  | { | 
|  | switch (req->cmd->common.opcode) { | 
|  | case nvme_cmd_read: | 
|  | case nvme_cmd_write: | 
|  | req->execute = nvmet_bdev_execute_rw; | 
|  | if (req->sq->ctrl->pi_support && nvmet_ns_has_pi(req->ns)) | 
|  | req->metadata_len = nvmet_rw_metadata_len(req); | 
|  | return 0; | 
|  | case nvme_cmd_flush: | 
|  | req->execute = nvmet_bdev_execute_flush; | 
|  | return 0; | 
|  | case nvme_cmd_dsm: | 
|  | req->execute = nvmet_bdev_execute_dsm; | 
|  | return 0; | 
|  | case nvme_cmd_write_zeroes: | 
|  | req->execute = nvmet_bdev_execute_write_zeroes; | 
|  | return 0; | 
|  | default: | 
|  | return nvmet_report_invalid_opcode(req); | 
|  | } | 
|  | } |