| # |
| # Wireless LAN device configuration |
| # |
| |
| menu "Wireless LAN (non-hamradio)" |
| depends on NETDEVICES |
| |
| config NET_RADIO |
| bool "Wireless LAN drivers (non-hamradio) & Wireless Extensions" |
| ---help--- |
| Support for wireless LANs and everything having to do with radio, |
| but not with amateur radio or FM broadcasting. |
| |
| Saying Y here also enables the Wireless Extensions (creates |
| /proc/net/wireless and enables iwconfig access). The Wireless |
| Extension is a generic API allowing a driver to expose to the user |
| space configuration and statistics specific to common Wireless LANs. |
| The beauty of it is that a single set of tool can support all the |
| variations of Wireless LANs, regardless of their type (as long as |
| the driver supports Wireless Extension). Another advantage is that |
| these parameters may be changed on the fly without restarting the |
| driver (or Linux). If you wish to use Wireless Extensions with |
| wireless PCMCIA (PC-) cards, you need to say Y here; you can fetch |
| the tools from |
| <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. |
| |
| Some user-level drivers for scarab devices which don't require |
| special kernel support are available from |
| <ftp://shadow.cabi.net/pub/Linux/>. |
| |
| # Note : the cards are obsolete (can't buy them anymore), but the drivers |
| # are not, as people are still using them... |
| comment "Obsolete Wireless cards support (pre-802.11)" |
| depends on NET_RADIO && (INET || ISA || PCMCIA) |
| |
| config STRIP |
| tristate "STRIP (Metricom starmode radio IP)" |
| depends on NET_RADIO && INET |
| ---help--- |
| Say Y if you have a Metricom radio and intend to use Starmode Radio |
| IP. STRIP is a radio protocol developed for the MosquitoNet project |
| (on the WWW at <http://mosquitonet.stanford.edu/>) to send Internet |
| traffic using Metricom radios. Metricom radios are small, battery |
| powered, 100kbit/sec packet radio transceivers, about the size and |
| weight of a cellular telephone. (You may also have heard them called |
| "Metricom modems" but we avoid the term "modem" because it misleads |
| many people into thinking that you can plug a Metricom modem into a |
| phone line and use it as a modem.) |
| |
| You can use STRIP on any Linux machine with a serial port, although |
| it is obviously most useful for people with laptop computers. If you |
| think you might get a Metricom radio in the future, there is no harm |
| in saying Y to STRIP now, except that it makes the kernel a bit |
| bigger. |
| |
| To compile this as a module, choose M here: the module will be |
| called strip. |
| |
| config ARLAN |
| tristate "Aironet Arlan 655 & IC2200 DS support" |
| depends on NET_RADIO && ISA && !64BIT |
| ---help--- |
| Aironet makes Arlan, a class of wireless LAN adapters. These use the |
| www.Telxon.com chip, which is also used on several similar cards. |
| This driver is tested on the 655 and IC2200 series cards. Look at |
| <http://www.ylenurme.ee/~elmer/655/> for the latest information. |
| |
| The driver is built as two modules, arlan and arlan-proc. The latter |
| is the /proc interface and is not needed most of time. |
| |
| On some computers the card ends up in non-valid state after some |
| time. Use a ping-reset script to clear it. |
| |
| config WAVELAN |
| tristate "AT&T/Lucent old WaveLAN & DEC RoamAbout DS ISA support" |
| depends on NET_RADIO && ISA |
| ---help--- |
| The Lucent WaveLAN (formerly NCR and AT&T; or DEC RoamAbout DS) is |
| a Radio LAN (wireless Ethernet-like Local Area Network) using the |
| radio frequencies 900 MHz and 2.4 GHz. |
| |
| This driver support the ISA version of the WaveLAN card. A separate |
| driver for the PCMCIA (PC-card) hardware is available in David |
| Hinds' pcmcia-cs package (see the file <file:Documentation/Changes> |
| for location). |
| |
| If you want to use an ISA WaveLAN card under Linux, say Y and read |
| the Ethernet-HOWTO, available from |
| <http://www.tldp.org/docs.html#howto>. Some more specific |
| information is contained in |
| <file:Documentation/networking/wavelan.txt> and in the source code |
| <file:drivers/net/wavelan.p.h>. |
| |
| You will also need the wireless tools package available from |
| <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. |
| Please read the man pages contained therein. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called wavelan. |
| |
| config PCMCIA_WAVELAN |
| tristate "AT&T/Lucent old WaveLAN Pcmcia wireless support" |
| depends on NET_RADIO && PCMCIA |
| help |
| Say Y here if you intend to attach an AT&T/Lucent Wavelan PCMCIA |
| (PC-card) wireless Ethernet networking card to your computer. This |
| driver is for the non-IEEE-802.11 Wavelan cards. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called wavelan_cs. If unsure, say N. |
| |
| config PCMCIA_NETWAVE |
| tristate "Xircom Netwave AirSurfer Pcmcia wireless support" |
| depends on NET_RADIO && PCMCIA |
| help |
| Say Y here if you intend to attach this type of PCMCIA (PC-card) |
| wireless Ethernet networking card to your computer. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called netwave_cs. If unsure, say N. |
| |
| comment "Wireless 802.11 Frequency Hopping cards support" |
| depends on NET_RADIO && PCMCIA |
| |
| config PCMCIA_RAYCS |
| tristate "Aviator/Raytheon 2.4MHz wireless support" |
| depends on NET_RADIO && PCMCIA |
| ---help--- |
| Say Y here if you intend to attach an Aviator/Raytheon PCMCIA |
| (PC-card) wireless Ethernet networking card to your computer. |
| Please read the file <file:Documentation/networking/ray_cs.txt> for |
| details. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called ray_cs. If unsure, say N. |
| |
| comment "Wireless 802.11b ISA/PCI cards support" |
| depends on NET_RADIO && (ISA || PCI || PPC_PMAC || PCMCIA) |
| |
| config AIRO |
| tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards" |
| depends on NET_RADIO && ISA && (PCI || BROKEN) |
| ---help--- |
| This is the standard Linux driver to support Cisco/Aironet ISA and |
| PCI 802.11 wireless cards. |
| It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X |
| - with or without encryption) as well as card before the Cisco |
| aquisition (Aironet 4500, Aironet 4800, Aironet 4800B). |
| |
| This driver support both the standard Linux Wireless Extensions |
| and Cisco proprietary API, so both the Linux Wireless Tools and the |
| Cisco Linux utilities can be used to configure the card. |
| |
| The driver can be compiled as a module and will be named "airo". |
| |
| config HERMES |
| tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)" |
| depends on NET_RADIO && (PPC_PMAC || PCI || PCMCIA) |
| ---help--- |
| A driver for 802.11b wireless cards based based on the "Hermes" or |
| Intersil HFA384x (Prism 2) MAC controller. This includes the vast |
| majority of the PCMCIA 802.11b cards (which are nearly all rebadges) |
| - except for the Cisco/Aironet cards. Cards supported include the |
| Apple Airport (not a PCMCIA card), WavelanIEEE/Orinoco, |
| Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya, |
| IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear |
| MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel |
| PRO/Wireless, and Symbol Spectrum24 High Rate amongst others. |
| |
| This option includes the guts of the driver, but in order to |
| actually use a card you will also need to enable support for PCMCIA |
| Hermes cards, PLX9052 based PCI adaptors or the Apple Airport below. |
| |
| You will also very likely also need the Wireless Tools in order to |
| configure your card and that /etc/pcmcia/wireless.opts works : |
| <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html> |
| |
| config APPLE_AIRPORT |
| tristate "Apple Airport support (built-in)" |
| depends on PPC_PMAC && HERMES |
| help |
| Say Y here to support the Airport 802.11b wireless Ethernet hardware |
| built into the Macintosh iBook and other recent PowerPC-based |
| Macintosh machines. This is essentially a Lucent Orinoco card with |
| a non-standard interface |
| |
| config PLX_HERMES |
| tristate "Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.) (EXPERIMENTAL)" |
| depends on PCI && HERMES && EXPERIMENTAL |
| help |
| Enable support for PCMCIA cards supported by the "Hermes" (aka |
| orinoco) driver when used in PLX9052 based PCI adaptors. These |
| adaptors are not a full PCMCIA controller but act as a more limited |
| PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that |
| 802.11b PCMCIA cards can be used in desktop machines. The Netgear |
| MA301 is such an adaptor. |
| |
| Support for these adaptors is so far still incomplete and buggy. |
| You have been warned. |
| |
| config TMD_HERMES |
| tristate "Hermes in TMD7160 based PCI adaptor support (EXPERIMENTAL)" |
| depends on PCI && HERMES && EXPERIMENTAL |
| help |
| Enable support for PCMCIA cards supported by the "Hermes" (aka |
| orinoco) driver when used in TMD7160 based PCI adaptors. These |
| adaptors are not a full PCMCIA controller but act as a more limited |
| PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that |
| 802.11b PCMCIA cards can be used in desktop machines. |
| |
| Support for these adaptors is so far still incomplete and buggy. |
| You have been warned. |
| |
| config PCI_HERMES |
| tristate "Prism 2.5 PCI 802.11b adaptor support (EXPERIMENTAL)" |
| depends on PCI && HERMES && EXPERIMENTAL |
| help |
| Enable support for PCI and mini-PCI 802.11b wireless NICs based on |
| the Prism 2.5 chipset. These are true PCI cards, not the 802.11b |
| PCMCIA cards bundled with PCI<->PCMCIA adaptors which are also |
| common. Some of the built-in wireless adaptors in laptops are of |
| this variety. |
| |
| config ATMEL |
| tristate "Atmel at76c50x chipset 802.11b support" |
| depends on NET_RADIO && EXPERIMENTAL |
| select FW_LOADER |
| select CRC32 |
| ---help--- |
| A driver 802.11b wireless cards based on the Atmel fast-vnet |
| chips. This driver supports standard Linux wireless extensions. |
| |
| Many cards based on this chipset do not have flash memory |
| and need their firmware loaded at start-up. If yours is |
| one of these, you will need to provide a firmware image |
| to be loaded into the card by the driver. The Atmel |
| firmware package can be downloaded from |
| <http://www.thekelleys.org.uk/atmel> |
| |
| config PCI_ATMEL |
| tristate "Atmel at76c506 PCI cards" |
| depends on ATMEL && PCI |
| ---help--- |
| Enable support for PCI and mini-PCI cards containing the |
| Atmel at76c506 chip. |
| |
| # If Pcmcia is compiled in, offer Pcmcia cards... |
| comment "Wireless 802.11b Pcmcia/Cardbus cards support" |
| depends on NET_RADIO && PCMCIA |
| |
| config PCMCIA_HERMES |
| tristate "Hermes PCMCIA card support" |
| depends on NET_RADIO && PCMCIA && HERMES |
| ---help--- |
| A driver for "Hermes" chipset based PCMCIA wireless adaptors, such |
| as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/ |
| EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and |
| others). It should also be usable on various Prism II based cards |
| such as the Linksys, D-Link and Farallon Skyline. It should also |
| work on Symbol cards such as the 3Com AirConnect and Ericsson WLAN. |
| |
| To use your PC-cards, you will need supporting software from David |
| Hinds' pcmcia-cs package (see the file <file:Documentation/Changes> |
| for location). You also want to check out the PCMCIA-HOWTO, |
| available from <http://www.tldp.org/docs.html#howto>. |
| |
| You will also very likely also need the Wireless Tools in order to |
| configure your card and that /etc/pcmcia/wireless.opts works: |
| <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. |
| |
| config AIRO_CS |
| tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards" |
| depends on NET_RADIO && PCMCIA && (BROKEN || !M32R) |
| ---help--- |
| This is the standard Linux driver to support Cisco/Aironet PCMCIA |
| 802.11 wireless cards. This driver is the same as the Aironet |
| driver part of the Linux Pcmcia package. |
| It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X |
| - with or without encryption) as well as card before the Cisco |
| aquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also |
| supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom |
| 802.11b cards. |
| |
| This driver support both the standard Linux Wireless Extensions |
| and Cisco proprietary API, so both the Linux Wireless Tools and the |
| Cisco Linux utilities can be used to configure the card. |
| |
| To use your PC-cards, you will need supporting software from David |
| Hinds' pcmcia-cs package (see the file <file:Documentation/Changes> |
| for location). You also want to check out the PCMCIA-HOWTO, |
| available from <http://www.tldp.org/docs.html#howto>. |
| |
| config PCMCIA_ATMEL |
| tristate "Atmel at76c502/at76c504 PCMCIA cards" |
| depends on NET_RADIO && ATMEL && PCMCIA |
| select FW_LOADER |
| select CRC32 |
| ---help--- |
| Enable support for PCMCIA cards containing the |
| Atmel at76c502 and at76c504 chips. |
| |
| config PCMCIA_WL3501 |
| tristate "Planet WL3501 PCMCIA cards" |
| depends on NET_RADIO && EXPERIMENTAL && PCMCIA |
| ---help--- |
| A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet. |
| It has basic support for Linux wireless extensions and initial |
| micro support for ethtool. |
| |
| comment "Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support" |
| depends on NET_RADIO && PCI |
| config PRISM54 |
| tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus' |
| depends on PCI && NET_RADIO && EXPERIMENTAL |
| select FW_LOADER |
| ---help--- |
| Enable PCI and Cardbus support for the following chipset based cards: |
| |
| ISL3880 - Prism GT 802.11 b/g |
| ISL3877 - Prism Indigo 802.11 a |
| ISL3890 - Prism Duette 802.11 a/b/g |
| |
| For a complete list of supported cards visit <http://prism54.org>. |
| Here is the latest confirmed list of supported cards: |
| |
| 3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72 (version 1) |
| Allnet ALL0271 PCI Card |
| Compex WL54G Cardbus Card |
| Corega CG-WLCB54GT Cardbus Card |
| D-Link Air Plus Xtreme G A1 Cardbus Card aka DWL-g650 |
| I-O Data WN-G54/CB Cardbus Card |
| Kobishi XG-300 aka Z-Com Cardbus Card |
| Netgear WG511 Cardbus Card |
| Ovislink WL-5400PCI PCI Card |
| Peabird WLG-PCI PCI Card |
| Sitecom WL-100i Cardbus Card |
| Sitecom WL-110i PCI Card |
| SMC2802W - EZ Connect g 2.4GHz 54 Mbps Wireless PCI Card |
| SMC2835W - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card |
| SMC2835W-V2 - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card |
| Z-Com XG-900 PCI Card |
| Zyxel G-100 Cardbus Card |
| |
| If you enable this you will need a firmware file as well. |
| You will need to copy this to /usr/lib/hotplug/firmware/isl3890. |
| You can get this non-GPL'd firmware file from the Prism54 project page: |
| <http://prism54.org> |
| You will also need the /etc/hotplug/firmware.agent script from |
| a current hotplug package. |
| |
| Note: You need a motherboard with DMA support to use any of these cards |
| |
| If you want to compile the driver as a module ( = code which can be |
| inserted in and removed from the running kernel whenever you want), |
| say M here and read <file:Documentation/modules.txt>. The module |
| will be called prism54.ko. |
| |
| # yes, this works even when no drivers are selected |
| config NET_WIRELESS |
| bool |
| depends on NET_RADIO && (ISA || PCI || PPC_PMAC || PCMCIA) |
| default y |
| |
| endmenu |
| |
