| /* |
| * Copyright 2020 Advanced Micro Devices, Inc. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR |
| * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, |
| * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| * |
| * Authors: AMD |
| * |
| */ |
| |
| |
| #include "dm_services.h" |
| #include "dm_helpers.h" |
| #include "core_types.h" |
| #include "resource.h" |
| #include "dcn30_hwseq.h" |
| #include "dccg.h" |
| #include "dce/dce_hwseq.h" |
| #include "dcn30_mpc.h" |
| #include "dcn30_dpp.h" |
| #include "dcn10/dcn10_cm_common.h" |
| #include "dcn30_cm_common.h" |
| #include "reg_helper.h" |
| #include "abm.h" |
| #include "clk_mgr.h" |
| #include "hubp.h" |
| #include "dchubbub.h" |
| #include "timing_generator.h" |
| #include "opp.h" |
| #include "ipp.h" |
| #include "mpc.h" |
| #include "mcif_wb.h" |
| #include "dc_dmub_srv.h" |
| #include "link_hwss.h" |
| #include "dpcd_defs.h" |
| #include "../dcn20/dcn20_hwseq.h" |
| #include "dcn30_resource.h" |
| #include "link.h" |
| |
| |
| |
| |
| #define DC_LOGGER_INIT(logger) |
| |
| #define CTX \ |
| hws->ctx |
| #define REG(reg)\ |
| hws->regs->reg |
| #define DC_LOGGER \ |
| dc->ctx->logger |
| |
| |
| #undef FN |
| #define FN(reg_name, field_name) \ |
| hws->shifts->field_name, hws->masks->field_name |
| |
| bool dcn30_set_blend_lut( |
| struct pipe_ctx *pipe_ctx, const struct dc_plane_state *plane_state) |
| { |
| struct dpp *dpp_base = pipe_ctx->plane_res.dpp; |
| bool result = true; |
| struct pwl_params *blend_lut = NULL; |
| |
| if (plane_state->blend_tf) { |
| if (plane_state->blend_tf->type == TF_TYPE_HWPWL) |
| blend_lut = &plane_state->blend_tf->pwl; |
| else if (plane_state->blend_tf->type == TF_TYPE_DISTRIBUTED_POINTS) { |
| cm3_helper_translate_curve_to_hw_format( |
| plane_state->blend_tf, &dpp_base->regamma_params, false); |
| blend_lut = &dpp_base->regamma_params; |
| } |
| } |
| result = dpp_base->funcs->dpp_program_blnd_lut(dpp_base, blend_lut); |
| |
| return result; |
| } |
| |
| static bool dcn30_set_mpc_shaper_3dlut(struct pipe_ctx *pipe_ctx, |
| const struct dc_stream_state *stream) |
| { |
| struct dpp *dpp_base = pipe_ctx->plane_res.dpp; |
| int mpcc_id = pipe_ctx->plane_res.hubp->inst; |
| struct mpc *mpc = pipe_ctx->stream_res.opp->ctx->dc->res_pool->mpc; |
| bool result = false; |
| int acquired_rmu = 0; |
| int mpcc_id_projected = 0; |
| |
| const struct pwl_params *shaper_lut = NULL; |
| //get the shaper lut params |
| if (stream->func_shaper) { |
| if (stream->func_shaper->type == TF_TYPE_HWPWL) { |
| shaper_lut = &stream->func_shaper->pwl; |
| } else if (stream->func_shaper->type == TF_TYPE_DISTRIBUTED_POINTS) { |
| cm_helper_translate_curve_to_hw_format(stream->func_shaper, |
| &dpp_base->shaper_params, true); |
| shaper_lut = &dpp_base->shaper_params; |
| } |
| } |
| |
| if (stream->lut3d_func && |
| stream->lut3d_func->state.bits.initialized == 1 && |
| stream->lut3d_func->state.bits.rmu_idx_valid == 1) { |
| if (stream->lut3d_func->state.bits.rmu_mux_num == 0) |
| mpcc_id_projected = stream->lut3d_func->state.bits.mpc_rmu0_mux; |
| else if (stream->lut3d_func->state.bits.rmu_mux_num == 1) |
| mpcc_id_projected = stream->lut3d_func->state.bits.mpc_rmu1_mux; |
| else if (stream->lut3d_func->state.bits.rmu_mux_num == 2) |
| mpcc_id_projected = stream->lut3d_func->state.bits.mpc_rmu2_mux; |
| if (mpcc_id_projected != mpcc_id) |
| BREAK_TO_DEBUGGER(); |
| /* find the reason why logical layer assigned a different |
| * mpcc_id into acquire_post_bldn_3dlut |
| */ |
| acquired_rmu = mpc->funcs->acquire_rmu(mpc, mpcc_id, |
| stream->lut3d_func->state.bits.rmu_mux_num); |
| if (acquired_rmu != stream->lut3d_func->state.bits.rmu_mux_num) |
| BREAK_TO_DEBUGGER(); |
| |
| result = mpc->funcs->program_3dlut(mpc, &stream->lut3d_func->lut_3d, |
| stream->lut3d_func->state.bits.rmu_mux_num); |
| result = mpc->funcs->program_shaper(mpc, shaper_lut, |
| stream->lut3d_func->state.bits.rmu_mux_num); |
| } else { |
| // loop through the available mux and release the requested mpcc_id |
| mpc->funcs->release_rmu(mpc, mpcc_id); |
| } |
| |
| return result; |
| } |
| |
| bool dcn30_set_input_transfer_func(struct dc *dc, |
| struct pipe_ctx *pipe_ctx, |
| const struct dc_plane_state *plane_state) |
| { |
| struct dce_hwseq *hws = dc->hwseq; |
| struct dpp *dpp_base = pipe_ctx->plane_res.dpp; |
| enum dc_transfer_func_predefined tf; |
| bool result = true; |
| struct pwl_params *params = NULL; |
| |
| if (dpp_base == NULL || plane_state == NULL) |
| return false; |
| |
| tf = TRANSFER_FUNCTION_UNITY; |
| |
| if (plane_state->in_transfer_func && |
| plane_state->in_transfer_func->type == TF_TYPE_PREDEFINED) |
| tf = plane_state->in_transfer_func->tf; |
| |
| dpp_base->funcs->dpp_set_pre_degam(dpp_base, tf); |
| |
| if (plane_state->in_transfer_func) { |
| if (plane_state->in_transfer_func->type == TF_TYPE_HWPWL) |
| params = &plane_state->in_transfer_func->pwl; |
| else if (plane_state->in_transfer_func->type == TF_TYPE_DISTRIBUTED_POINTS && |
| cm3_helper_translate_curve_to_hw_format(plane_state->in_transfer_func, |
| &dpp_base->degamma_params, false)) |
| params = &dpp_base->degamma_params; |
| } |
| |
| result = dpp_base->funcs->dpp_program_gamcor_lut(dpp_base, params); |
| |
| if (pipe_ctx->stream_res.opp && pipe_ctx->stream_res.opp->ctx) { |
| if (dpp_base->funcs->dpp_program_blnd_lut) |
| hws->funcs.set_blend_lut(pipe_ctx, plane_state); |
| if (dpp_base->funcs->dpp_program_shaper_lut && |
| dpp_base->funcs->dpp_program_3dlut) |
| hws->funcs.set_shaper_3dlut(pipe_ctx, plane_state); |
| } |
| |
| return result; |
| } |
| |
| bool dcn30_set_output_transfer_func(struct dc *dc, |
| struct pipe_ctx *pipe_ctx, |
| const struct dc_stream_state *stream) |
| { |
| int mpcc_id = pipe_ctx->plane_res.hubp->inst; |
| struct mpc *mpc = pipe_ctx->stream_res.opp->ctx->dc->res_pool->mpc; |
| struct pwl_params *params = NULL; |
| bool ret = false; |
| |
| /* program OGAM or 3DLUT only for the top pipe*/ |
| if (pipe_ctx->top_pipe == NULL) { |
| /*program rmu shaper and 3dlut in MPC*/ |
| ret = dcn30_set_mpc_shaper_3dlut(pipe_ctx, stream); |
| if (ret == false && mpc->funcs->set_output_gamma && stream->out_transfer_func) { |
| if (stream->out_transfer_func->type == TF_TYPE_HWPWL) |
| params = &stream->out_transfer_func->pwl; |
| else if (pipe_ctx->stream->out_transfer_func->type == |
| TF_TYPE_DISTRIBUTED_POINTS && |
| cm3_helper_translate_curve_to_hw_format( |
| stream->out_transfer_func, |
| &mpc->blender_params, false)) |
| params = &mpc->blender_params; |
| /* there are no ROM LUTs in OUTGAM */ |
| if (stream->out_transfer_func->type == TF_TYPE_PREDEFINED) |
| BREAK_TO_DEBUGGER(); |
| } |
| } |
| |
| mpc->funcs->set_output_gamma(mpc, mpcc_id, params); |
| return ret; |
| } |
| |
| static void dcn30_set_writeback( |
| struct dc *dc, |
| struct dc_writeback_info *wb_info, |
| struct dc_state *context) |
| { |
| struct mcif_wb *mcif_wb; |
| struct mcif_buf_params *mcif_buf_params; |
| |
| ASSERT(wb_info->dwb_pipe_inst < MAX_DWB_PIPES); |
| ASSERT(wb_info->wb_enabled); |
| ASSERT(wb_info->mpcc_inst >= 0); |
| ASSERT(wb_info->mpcc_inst < dc->res_pool->mpcc_count); |
| mcif_wb = dc->res_pool->mcif_wb[wb_info->dwb_pipe_inst]; |
| mcif_buf_params = &wb_info->mcif_buf_params; |
| |
| /* set DWB MPC mux */ |
| dc->res_pool->mpc->funcs->set_dwb_mux(dc->res_pool->mpc, |
| wb_info->dwb_pipe_inst, wb_info->mpcc_inst); |
| /* set MCIF_WB buffer and arbitration configuration */ |
| mcif_wb->funcs->config_mcif_buf(mcif_wb, mcif_buf_params, wb_info->dwb_params.dest_height); |
| mcif_wb->funcs->config_mcif_arb(mcif_wb, &context->bw_ctx.bw.dcn.bw_writeback.mcif_wb_arb[wb_info->dwb_pipe_inst]); |
| } |
| |
| void dcn30_update_writeback( |
| struct dc *dc, |
| struct dc_writeback_info *wb_info, |
| struct dc_state *context) |
| { |
| struct dwbc *dwb; |
| dwb = dc->res_pool->dwbc[wb_info->dwb_pipe_inst]; |
| DC_LOG_DWB("%s dwb_pipe_inst = %d, mpcc_inst = %d",\ |
| __func__, wb_info->dwb_pipe_inst,\ |
| wb_info->mpcc_inst); |
| |
| dcn30_set_writeback(dc, wb_info, context); |
| |
| /* update DWB */ |
| dwb->funcs->update(dwb, &wb_info->dwb_params); |
| } |
| |
| bool dcn30_mmhubbub_warmup( |
| struct dc *dc, |
| unsigned int num_dwb, |
| struct dc_writeback_info *wb_info) |
| { |
| struct dwbc *dwb; |
| struct mcif_wb *mcif_wb; |
| struct mcif_warmup_params warmup_params = {0}; |
| unsigned int i, i_buf; |
| /*make sure there is no active DWB eanbled */ |
| for (i = 0; i < num_dwb; i++) { |
| dwb = dc->res_pool->dwbc[wb_info[i].dwb_pipe_inst]; |
| if (dwb->dwb_is_efc_transition || dwb->dwb_is_drc) { |
| /*can not do warmup while any dwb enabled*/ |
| return false; |
| } |
| } |
| |
| if (wb_info->mcif_warmup_params.p_vmid == 0) |
| return false; |
| |
| /*check whether this is new interface: warmup big buffer once*/ |
| if (wb_info->mcif_warmup_params.start_address.quad_part != 0 && |
| wb_info->mcif_warmup_params.region_size != 0) { |
| /*mmhubbub is shared, so it does not matter which MCIF*/ |
| mcif_wb = dc->res_pool->mcif_wb[0]; |
| /*warmup a big chunk of VM buffer at once*/ |
| warmup_params.start_address.quad_part = wb_info->mcif_warmup_params.start_address.quad_part; |
| warmup_params.address_increment = wb_info->mcif_warmup_params.region_size; |
| warmup_params.region_size = wb_info->mcif_warmup_params.region_size; |
| warmup_params.p_vmid = wb_info->mcif_warmup_params.p_vmid; |
| |
| if (warmup_params.address_increment == 0) |
| warmup_params.address_increment = dc->dml.soc.vmm_page_size_bytes; |
| |
| mcif_wb->funcs->warmup_mcif(mcif_wb, &warmup_params); |
| return true; |
| } |
| /*following is the original: warmup each DWB's mcif buffer*/ |
| for (i = 0; i < num_dwb; i++) { |
| dwb = dc->res_pool->dwbc[wb_info[i].dwb_pipe_inst]; |
| mcif_wb = dc->res_pool->mcif_wb[wb_info[i].dwb_pipe_inst]; |
| /*warmup is for VM mode only*/ |
| if (wb_info[i].mcif_buf_params.p_vmid == 0) |
| return false; |
| |
| /* Warmup MCIF_WB */ |
| for (i_buf = 0; i_buf < MCIF_BUF_COUNT; i_buf++) { |
| warmup_params.start_address.quad_part = wb_info[i].mcif_buf_params.luma_address[i_buf]; |
| warmup_params.address_increment = dc->dml.soc.vmm_page_size_bytes; |
| warmup_params.region_size = wb_info[i].mcif_buf_params.luma_pitch * wb_info[i].dwb_params.dest_height; |
| warmup_params.p_vmid = wb_info[i].mcif_buf_params.p_vmid; |
| mcif_wb->funcs->warmup_mcif(mcif_wb, &warmup_params); |
| } |
| } |
| return true; |
| } |
| |
| void dcn30_enable_writeback( |
| struct dc *dc, |
| struct dc_writeback_info *wb_info, |
| struct dc_state *context) |
| { |
| struct dwbc *dwb; |
| struct mcif_wb *mcif_wb; |
| struct timing_generator *optc; |
| |
| dwb = dc->res_pool->dwbc[wb_info->dwb_pipe_inst]; |
| mcif_wb = dc->res_pool->mcif_wb[wb_info->dwb_pipe_inst]; |
| |
| /* set the OPTC source mux */ |
| optc = dc->res_pool->timing_generators[dwb->otg_inst]; |
| DC_LOG_DWB("%s dwb_pipe_inst = %d, mpcc_inst = %d",\ |
| __func__, wb_info->dwb_pipe_inst,\ |
| wb_info->mpcc_inst); |
| if (IS_DIAG_DC(dc->ctx->dce_environment)) { |
| /*till diags switch to warmup interface*/ |
| dcn30_mmhubbub_warmup(dc, 1, wb_info); |
| } |
| /* Update writeback pipe */ |
| dcn30_set_writeback(dc, wb_info, context); |
| |
| /* Enable MCIF_WB */ |
| mcif_wb->funcs->enable_mcif(mcif_wb); |
| /* Enable DWB */ |
| dwb->funcs->enable(dwb, &wb_info->dwb_params); |
| } |
| |
| void dcn30_disable_writeback( |
| struct dc *dc, |
| unsigned int dwb_pipe_inst) |
| { |
| struct dwbc *dwb; |
| struct mcif_wb *mcif_wb; |
| |
| ASSERT(dwb_pipe_inst < MAX_DWB_PIPES); |
| dwb = dc->res_pool->dwbc[dwb_pipe_inst]; |
| mcif_wb = dc->res_pool->mcif_wb[dwb_pipe_inst]; |
| DC_LOG_DWB("%s dwb_pipe_inst = %d",\ |
| __func__, dwb_pipe_inst); |
| |
| /* disable DWB */ |
| dwb->funcs->disable(dwb); |
| /* disable MCIF */ |
| mcif_wb->funcs->disable_mcif(mcif_wb); |
| /* disable MPC DWB mux */ |
| dc->res_pool->mpc->funcs->disable_dwb_mux(dc->res_pool->mpc, dwb_pipe_inst); |
| } |
| |
| void dcn30_program_all_writeback_pipes_in_tree( |
| struct dc *dc, |
| const struct dc_stream_state *stream, |
| struct dc_state *context) |
| { |
| struct dc_writeback_info wb_info; |
| struct dwbc *dwb; |
| struct dc_stream_status *stream_status = NULL; |
| int i_wb, i_pipe, i_stream; |
| DC_LOG_DWB("%s", __func__); |
| |
| ASSERT(stream); |
| for (i_stream = 0; i_stream < context->stream_count; i_stream++) { |
| if (context->streams[i_stream] == stream) { |
| stream_status = &context->stream_status[i_stream]; |
| break; |
| } |
| } |
| ASSERT(stream_status); |
| |
| ASSERT(stream->num_wb_info <= dc->res_pool->res_cap->num_dwb); |
| /* For each writeback pipe */ |
| for (i_wb = 0; i_wb < stream->num_wb_info; i_wb++) { |
| |
| /* copy writeback info to local non-const so mpcc_inst can be set */ |
| wb_info = stream->writeback_info[i_wb]; |
| if (wb_info.wb_enabled) { |
| |
| /* get the MPCC instance for writeback_source_plane */ |
| wb_info.mpcc_inst = -1; |
| for (i_pipe = 0; i_pipe < dc->res_pool->pipe_count; i_pipe++) { |
| struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i_pipe]; |
| |
| if (!pipe_ctx->plane_state) |
| continue; |
| |
| if (pipe_ctx->plane_state == wb_info.writeback_source_plane) { |
| wb_info.mpcc_inst = pipe_ctx->plane_res.mpcc_inst; |
| break; |
| } |
| } |
| |
| if (wb_info.mpcc_inst == -1) { |
| /* Disable writeback pipe and disconnect from MPCC |
| * if source plane has been removed |
| */ |
| dc->hwss.disable_writeback(dc, wb_info.dwb_pipe_inst); |
| continue; |
| } |
| |
| ASSERT(wb_info.dwb_pipe_inst < dc->res_pool->res_cap->num_dwb); |
| dwb = dc->res_pool->dwbc[wb_info.dwb_pipe_inst]; |
| if (dwb->funcs->is_enabled(dwb)) { |
| /* writeback pipe already enabled, only need to update */ |
| dc->hwss.update_writeback(dc, &wb_info, context); |
| } else { |
| /* Enable writeback pipe and connect to MPCC */ |
| dc->hwss.enable_writeback(dc, &wb_info, context); |
| } |
| } else { |
| /* Disable writeback pipe and disconnect from MPCC */ |
| dc->hwss.disable_writeback(dc, wb_info.dwb_pipe_inst); |
| } |
| } |
| } |
| |
| void dcn30_init_hw(struct dc *dc) |
| { |
| struct abm **abms = dc->res_pool->multiple_abms; |
| struct dce_hwseq *hws = dc->hwseq; |
| struct dc_bios *dcb = dc->ctx->dc_bios; |
| struct resource_pool *res_pool = dc->res_pool; |
| int i; |
| int edp_num; |
| uint32_t backlight = MAX_BACKLIGHT_LEVEL; |
| |
| if (dc->clk_mgr && dc->clk_mgr->funcs->init_clocks) |
| dc->clk_mgr->funcs->init_clocks(dc->clk_mgr); |
| |
| // Initialize the dccg |
| if (res_pool->dccg->funcs->dccg_init) |
| res_pool->dccg->funcs->dccg_init(res_pool->dccg); |
| |
| if (IS_FPGA_MAXIMUS_DC(dc->ctx->dce_environment)) { |
| |
| REG_WRITE(REFCLK_CNTL, 0); |
| REG_UPDATE(DCHUBBUB_GLOBAL_TIMER_CNTL, DCHUBBUB_GLOBAL_TIMER_ENABLE, 1); |
| REG_WRITE(DIO_MEM_PWR_CTRL, 0); |
| |
| if (!dc->debug.disable_clock_gate) { |
| /* enable all DCN clock gating */ |
| REG_WRITE(DCCG_GATE_DISABLE_CNTL, 0); |
| |
| REG_WRITE(DCCG_GATE_DISABLE_CNTL2, 0); |
| |
| REG_UPDATE(DCFCLK_CNTL, DCFCLK_GATE_DIS, 0); |
| } |
| |
| //Enable ability to power gate / don't force power on permanently |
| if (hws->funcs.enable_power_gating_plane) |
| hws->funcs.enable_power_gating_plane(hws, true); |
| |
| return; |
| } |
| |
| if (!dcb->funcs->is_accelerated_mode(dcb)) { |
| hws->funcs.bios_golden_init(dc); |
| hws->funcs.disable_vga(dc->hwseq); |
| } |
| |
| if (dc->debug.enable_mem_low_power.bits.dmcu) { |
| // Force ERAM to shutdown if DMCU is not enabled |
| if (dc->debug.disable_dmcu || dc->config.disable_dmcu) { |
| REG_UPDATE(DMU_MEM_PWR_CNTL, DMCU_ERAM_MEM_PWR_FORCE, 3); |
| } |
| } |
| |
| // Set default OPTC memory power states |
| if (dc->debug.enable_mem_low_power.bits.optc) { |
| // Shutdown when unassigned and light sleep in VBLANK |
| REG_SET_2(ODM_MEM_PWR_CTRL3, 0, ODM_MEM_UNASSIGNED_PWR_MODE, 3, ODM_MEM_VBLANK_PWR_MODE, 1); |
| } |
| |
| if (dc->ctx->dc_bios->fw_info_valid) { |
| res_pool->ref_clocks.xtalin_clock_inKhz = |
| dc->ctx->dc_bios->fw_info.pll_info.crystal_frequency; |
| |
| if (!IS_FPGA_MAXIMUS_DC(dc->ctx->dce_environment)) { |
| if (res_pool->dccg && res_pool->hubbub) { |
| |
| (res_pool->dccg->funcs->get_dccg_ref_freq)(res_pool->dccg, |
| dc->ctx->dc_bios->fw_info.pll_info.crystal_frequency, |
| &res_pool->ref_clocks.dccg_ref_clock_inKhz); |
| |
| (res_pool->hubbub->funcs->get_dchub_ref_freq)(res_pool->hubbub, |
| res_pool->ref_clocks.dccg_ref_clock_inKhz, |
| &res_pool->ref_clocks.dchub_ref_clock_inKhz); |
| } else { |
| // Not all ASICs have DCCG sw component |
| res_pool->ref_clocks.dccg_ref_clock_inKhz = |
| res_pool->ref_clocks.xtalin_clock_inKhz; |
| res_pool->ref_clocks.dchub_ref_clock_inKhz = |
| res_pool->ref_clocks.xtalin_clock_inKhz; |
| } |
| } |
| } else |
| ASSERT_CRITICAL(false); |
| |
| for (i = 0; i < dc->link_count; i++) { |
| /* Power up AND update implementation according to the |
| * required signal (which may be different from the |
| * default signal on connector). |
| */ |
| struct dc_link *link = dc->links[i]; |
| |
| link->link_enc->funcs->hw_init(link->link_enc); |
| |
| /* Check for enabled DIG to identify enabled display */ |
| if (link->link_enc->funcs->is_dig_enabled && |
| link->link_enc->funcs->is_dig_enabled(link->link_enc)) { |
| link->link_status.link_active = true; |
| if (link->link_enc->funcs->fec_is_active && |
| link->link_enc->funcs->fec_is_active(link->link_enc)) |
| link->fec_state = dc_link_fec_enabled; |
| } |
| } |
| |
| /* Power gate DSCs */ |
| for (i = 0; i < res_pool->res_cap->num_dsc; i++) |
| if (hws->funcs.dsc_pg_control != NULL) |
| hws->funcs.dsc_pg_control(hws, res_pool->dscs[i]->inst, false); |
| |
| /* we want to turn off all dp displays before doing detection */ |
| link_blank_all_dp_displays(dc); |
| |
| if (hws->funcs.enable_power_gating_plane) |
| hws->funcs.enable_power_gating_plane(dc->hwseq, true); |
| |
| /* If taking control over from VBIOS, we may want to optimize our first |
| * mode set, so we need to skip powering down pipes until we know which |
| * pipes we want to use. |
| * Otherwise, if taking control is not possible, we need to power |
| * everything down. |
| */ |
| if (dcb->funcs->is_accelerated_mode(dcb) || !dc->config.seamless_boot_edp_requested) { |
| hws->funcs.init_pipes(dc, dc->current_state); |
| if (dc->res_pool->hubbub->funcs->allow_self_refresh_control) |
| dc->res_pool->hubbub->funcs->allow_self_refresh_control(dc->res_pool->hubbub, |
| !dc->res_pool->hubbub->ctx->dc->debug.disable_stutter); |
| } |
| |
| /* In headless boot cases, DIG may be turned |
| * on which causes HW/SW discrepancies. |
| * To avoid this, power down hardware on boot |
| * if DIG is turned on and seamless boot not enabled |
| */ |
| if (!dc->config.seamless_boot_edp_requested) { |
| struct dc_link *edp_links[MAX_NUM_EDP]; |
| struct dc_link *edp_link = NULL; |
| |
| get_edp_links(dc, edp_links, &edp_num); |
| if (edp_num) |
| edp_link = edp_links[0]; |
| if (edp_link && edp_link->link_enc->funcs->is_dig_enabled && |
| edp_link->link_enc->funcs->is_dig_enabled(edp_link->link_enc) && |
| dc->hwss.edp_backlight_control && |
| dc->hwss.power_down && |
| dc->hwss.edp_power_control) { |
| dc->hwss.edp_backlight_control(edp_link, false); |
| dc->hwss.power_down(dc); |
| dc->hwss.edp_power_control(edp_link, false); |
| } else { |
| for (i = 0; i < dc->link_count; i++) { |
| struct dc_link *link = dc->links[i]; |
| |
| if (link->link_enc->funcs->is_dig_enabled && |
| link->link_enc->funcs->is_dig_enabled(link->link_enc) && |
| dc->hwss.power_down) { |
| dc->hwss.power_down(dc); |
| break; |
| } |
| |
| } |
| } |
| } |
| |
| for (i = 0; i < res_pool->audio_count; i++) { |
| struct audio *audio = res_pool->audios[i]; |
| |
| audio->funcs->hw_init(audio); |
| } |
| |
| for (i = 0; i < dc->link_count; i++) { |
| struct dc_link *link = dc->links[i]; |
| |
| if (link->panel_cntl) |
| backlight = link->panel_cntl->funcs->hw_init(link->panel_cntl); |
| } |
| |
| for (i = 0; i < dc->res_pool->pipe_count; i++) { |
| if (abms[i] != NULL) |
| abms[i]->funcs->abm_init(abms[i], backlight); |
| } |
| |
| /* power AFMT HDMI memory TODO: may move to dis/en output save power*/ |
| REG_WRITE(DIO_MEM_PWR_CTRL, 0); |
| |
| if (!dc->debug.disable_clock_gate) { |
| /* enable all DCN clock gating */ |
| REG_WRITE(DCCG_GATE_DISABLE_CNTL, 0); |
| |
| REG_WRITE(DCCG_GATE_DISABLE_CNTL2, 0); |
| |
| REG_UPDATE(DCFCLK_CNTL, DCFCLK_GATE_DIS, 0); |
| } |
| |
| if (!dcb->funcs->is_accelerated_mode(dcb) && dc->res_pool->hubbub->funcs->init_watermarks) |
| dc->res_pool->hubbub->funcs->init_watermarks(dc->res_pool->hubbub); |
| |
| if (dc->clk_mgr->funcs->notify_wm_ranges) |
| dc->clk_mgr->funcs->notify_wm_ranges(dc->clk_mgr); |
| |
| if (dc->clk_mgr->funcs->set_hard_max_memclk) |
| dc->clk_mgr->funcs->set_hard_max_memclk(dc->clk_mgr); |
| |
| if (dc->res_pool->hubbub->funcs->force_pstate_change_control) |
| dc->res_pool->hubbub->funcs->force_pstate_change_control( |
| dc->res_pool->hubbub, false, false); |
| if (dc->res_pool->hubbub->funcs->init_crb) |
| dc->res_pool->hubbub->funcs->init_crb(dc->res_pool->hubbub); |
| |
| // Get DMCUB capabilities |
| dc_dmub_srv_query_caps_cmd(dc->ctx->dmub_srv->dmub); |
| dc->caps.dmub_caps.psr = dc->ctx->dmub_srv->dmub->feature_caps.psr; |
| dc->caps.dmub_caps.mclk_sw = dc->ctx->dmub_srv->dmub->feature_caps.fw_assisted_mclk_switch; |
| } |
| |
| void dcn30_set_avmute(struct pipe_ctx *pipe_ctx, bool enable) |
| { |
| if (pipe_ctx == NULL) |
| return; |
| |
| if (dc_is_hdmi_signal(pipe_ctx->stream->signal) && pipe_ctx->stream_res.stream_enc != NULL) |
| pipe_ctx->stream_res.stream_enc->funcs->set_avmute( |
| pipe_ctx->stream_res.stream_enc, |
| enable); |
| } |
| |
| void dcn30_update_info_frame(struct pipe_ctx *pipe_ctx) |
| { |
| bool is_hdmi_tmds; |
| bool is_dp; |
| |
| ASSERT(pipe_ctx->stream); |
| |
| if (pipe_ctx->stream_res.stream_enc == NULL) |
| return; /* this is not root pipe */ |
| |
| is_hdmi_tmds = dc_is_hdmi_tmds_signal(pipe_ctx->stream->signal); |
| is_dp = dc_is_dp_signal(pipe_ctx->stream->signal); |
| |
| if (!is_hdmi_tmds && !is_dp) |
| return; |
| |
| if (is_hdmi_tmds) |
| pipe_ctx->stream_res.stream_enc->funcs->update_hdmi_info_packets( |
| pipe_ctx->stream_res.stream_enc, |
| &pipe_ctx->stream_res.encoder_info_frame); |
| else { |
| if (pipe_ctx->stream_res.stream_enc->funcs->update_dp_info_packets_sdp_line_num) |
| pipe_ctx->stream_res.stream_enc->funcs->update_dp_info_packets_sdp_line_num( |
| pipe_ctx->stream_res.stream_enc, |
| &pipe_ctx->stream_res.encoder_info_frame); |
| |
| pipe_ctx->stream_res.stream_enc->funcs->update_dp_info_packets( |
| pipe_ctx->stream_res.stream_enc, |
| &pipe_ctx->stream_res.encoder_info_frame); |
| } |
| } |
| |
| void dcn30_program_dmdata_engine(struct pipe_ctx *pipe_ctx) |
| { |
| struct dc_stream_state *stream = pipe_ctx->stream; |
| struct hubp *hubp = pipe_ctx->plane_res.hubp; |
| bool enable = false; |
| struct stream_encoder *stream_enc = pipe_ctx->stream_res.stream_enc; |
| enum dynamic_metadata_mode mode = dc_is_dp_signal(stream->signal) |
| ? dmdata_dp |
| : dmdata_hdmi; |
| |
| /* if using dynamic meta, don't set up generic infopackets */ |
| if (pipe_ctx->stream->dmdata_address.quad_part != 0) { |
| pipe_ctx->stream_res.encoder_info_frame.hdrsmd.valid = false; |
| enable = true; |
| } |
| |
| if (!hubp) |
| return; |
| |
| if (!stream_enc || !stream_enc->funcs->set_dynamic_metadata) |
| return; |
| |
| stream_enc->funcs->set_dynamic_metadata(stream_enc, enable, |
| hubp->inst, mode); |
| } |
| |
| bool dcn30_apply_idle_power_optimizations(struct dc *dc, bool enable) |
| { |
| union dmub_rb_cmd cmd; |
| uint32_t tmr_delay = 0, tmr_scale = 0; |
| struct dc_cursor_attributes cursor_attr; |
| bool cursor_cache_enable = false; |
| struct dc_stream_state *stream = NULL; |
| struct dc_plane_state *plane = NULL; |
| |
| if (!dc->ctx->dmub_srv) |
| return false; |
| |
| if (enable) { |
| if (dc->current_state) { |
| int i; |
| |
| /* First, check no-memory-requests case */ |
| for (i = 0; i < dc->current_state->stream_count; i++) { |
| if (dc->current_state->stream_status[i].plane_count) |
| /* Fail eligibility on a visible stream */ |
| break; |
| } |
| |
| if (i == dc->current_state->stream_count) { |
| /* Enable no-memory-requests case */ |
| memset(&cmd, 0, sizeof(cmd)); |
| cmd.mall.header.type = DMUB_CMD__MALL; |
| cmd.mall.header.sub_type = DMUB_CMD__MALL_ACTION_NO_DF_REQ; |
| cmd.mall.header.payload_bytes = sizeof(cmd.mall) - sizeof(cmd.mall.header); |
| |
| dc_dmub_srv_cmd_queue(dc->ctx->dmub_srv, &cmd); |
| dc_dmub_srv_cmd_execute(dc->ctx->dmub_srv); |
| |
| return true; |
| } |
| |
| stream = dc->current_state->streams[0]; |
| plane = (stream ? dc->current_state->stream_status[0].plane_states[0] : NULL); |
| |
| if (stream && plane) { |
| cursor_cache_enable = stream->cursor_position.enable && |
| plane->address.grph.cursor_cache_addr.quad_part; |
| cursor_attr = stream->cursor_attributes; |
| } |
| |
| /* |
| * Second, check MALL eligibility |
| * |
| * single display only, single surface only, 8 and 16 bit formats only, no VM, |
| * do not use MALL for displays that support PSR as they use D0i3.2 in DMCUB FW |
| * |
| * TODO: When we implement multi-display, PSR displays will be allowed if there is |
| * a non-PSR display present, since in that case we can't do D0i3.2 |
| */ |
| if (dc->current_state->stream_count == 1 && |
| stream->link->psr_settings.psr_version == DC_PSR_VERSION_UNSUPPORTED && |
| dc->current_state->stream_status[0].plane_count == 1 && |
| plane->format <= SURFACE_PIXEL_FORMAT_GRPH_ABGR16161616F && |
| plane->format >= SURFACE_PIXEL_FORMAT_GRPH_ARGB8888 && |
| plane->address.page_table_base.quad_part == 0 && |
| dc->hwss.does_plane_fit_in_mall && |
| dc->hwss.does_plane_fit_in_mall(dc, plane, |
| cursor_cache_enable ? &cursor_attr : NULL)) { |
| unsigned int v_total = stream->adjust.v_total_max ? |
| stream->adjust.v_total_max : stream->timing.v_total; |
| unsigned int refresh_hz = div_u64((unsigned long long) stream->timing.pix_clk_100hz * |
| 100LL, (v_total * stream->timing.h_total)); |
| |
| /* |
| * one frame time in microsec: |
| * Delay_Us = 1000000 / refresh |
| * dynamic_delay_us = 1000000 / refresh + 2 * stutter_period |
| * |
| * one frame time modified by 'additional timer percent' (p): |
| * Delay_Us_modified = dynamic_delay_us + dynamic_delay_us * p / 100 |
| * = dynamic_delay_us * (1 + p / 100) |
| * = (1000000 / refresh + 2 * stutter_period) * (100 + p) / 100 |
| * = (1000000 + 2 * stutter_period * refresh) * (100 + p) / (100 * refresh) |
| * |
| * formula for timer duration based on parameters, from regspec: |
| * dynamic_delay_us = 65.28 * (64 + MallFrameCacheTmrDly) * 2^MallFrameCacheTmrScale |
| * |
| * dynamic_delay_us / 65.28 = (64 + MallFrameCacheTmrDly) * 2^MallFrameCacheTmrScale |
| * (dynamic_delay_us / 65.28) / 2^MallFrameCacheTmrScale = 64 + MallFrameCacheTmrDly |
| * MallFrameCacheTmrDly = ((dynamic_delay_us / 65.28) / 2^MallFrameCacheTmrScale) - 64 |
| * = (1000000 + 2 * stutter_period * refresh) * (100 + p) / (100 * refresh) / 65.28 / 2^MallFrameCacheTmrScale - 64 |
| * = (1000000 + 2 * stutter_period * refresh) * (100 + p) / (refresh * 6528 * 2^MallFrameCacheTmrScale) - 64 |
| * |
| * need to round up the result of the division before the subtraction |
| */ |
| unsigned int denom = refresh_hz * 6528; |
| unsigned int stutter_period = dc->current_state->perf_params.stutter_period_us; |
| |
| tmr_delay = div_u64(((1000000LL + 2 * stutter_period * refresh_hz) * |
| (100LL + dc->debug.mall_additional_timer_percent) + denom - 1), |
| denom) - 64LL; |
| |
| /* In some cases the stutter period is really big (tiny modes) in these |
| * cases MALL cant be enabled, So skip these cases to avoid a ASSERT() |
| * |
| * We can check if stutter_period is more than 1/10th the frame time to |
| * consider if we can actually meet the range of hysteresis timer |
| */ |
| if (stutter_period > 100000/refresh_hz) |
| return false; |
| |
| /* scale should be increased until it fits into 6 bits */ |
| while (tmr_delay & ~0x3F) { |
| tmr_scale++; |
| |
| if (tmr_scale > 3) { |
| /* Delay exceeds range of hysteresis timer */ |
| ASSERT(false); |
| return false; |
| } |
| |
| denom *= 2; |
| tmr_delay = div_u64(((1000000LL + 2 * stutter_period * refresh_hz) * |
| (100LL + dc->debug.mall_additional_timer_percent) + denom - 1), |
| denom) - 64LL; |
| } |
| |
| /* Copy HW cursor */ |
| if (cursor_cache_enable) { |
| memset(&cmd, 0, sizeof(cmd)); |
| cmd.mall.header.type = DMUB_CMD__MALL; |
| cmd.mall.header.sub_type = DMUB_CMD__MALL_ACTION_COPY_CURSOR; |
| cmd.mall.header.payload_bytes = |
| sizeof(cmd.mall) - sizeof(cmd.mall.header); |
| |
| switch (cursor_attr.color_format) { |
| case CURSOR_MODE_MONO: |
| cmd.mall.cursor_bpp = 2; |
| break; |
| case CURSOR_MODE_COLOR_1BIT_AND: |
| case CURSOR_MODE_COLOR_PRE_MULTIPLIED_ALPHA: |
| case CURSOR_MODE_COLOR_UN_PRE_MULTIPLIED_ALPHA: |
| cmd.mall.cursor_bpp = 32; |
| break; |
| |
| case CURSOR_MODE_COLOR_64BIT_FP_PRE_MULTIPLIED: |
| case CURSOR_MODE_COLOR_64BIT_FP_UN_PRE_MULTIPLIED: |
| cmd.mall.cursor_bpp = 64; |
| break; |
| } |
| |
| cmd.mall.cursor_copy_src.quad_part = cursor_attr.address.quad_part; |
| cmd.mall.cursor_copy_dst.quad_part = |
| (plane->address.grph.cursor_cache_addr.quad_part + 2047) & ~2047; |
| cmd.mall.cursor_width = cursor_attr.width; |
| cmd.mall.cursor_height = cursor_attr.height; |
| cmd.mall.cursor_pitch = cursor_attr.pitch; |
| |
| dc_dmub_srv_cmd_queue(dc->ctx->dmub_srv, &cmd); |
| dc_dmub_srv_cmd_execute(dc->ctx->dmub_srv); |
| dc_dmub_srv_wait_idle(dc->ctx->dmub_srv); |
| |
| /* Use copied cursor, and it's okay to not switch back */ |
| cursor_attr.address.quad_part = cmd.mall.cursor_copy_dst.quad_part; |
| dc_stream_set_cursor_attributes(stream, &cursor_attr); |
| } |
| |
| /* Enable MALL */ |
| memset(&cmd, 0, sizeof(cmd)); |
| cmd.mall.header.type = DMUB_CMD__MALL; |
| cmd.mall.header.sub_type = DMUB_CMD__MALL_ACTION_ALLOW; |
| cmd.mall.header.payload_bytes = sizeof(cmd.mall) - sizeof(cmd.mall.header); |
| cmd.mall.tmr_delay = tmr_delay; |
| cmd.mall.tmr_scale = tmr_scale; |
| cmd.mall.debug_bits = dc->debug.mall_error_as_fatal; |
| |
| dc_dmub_srv_cmd_queue(dc->ctx->dmub_srv, &cmd); |
| dc_dmub_srv_cmd_execute(dc->ctx->dmub_srv); |
| |
| return true; |
| } |
| } |
| |
| /* No applicable optimizations */ |
| return false; |
| } |
| |
| /* Disable MALL */ |
| memset(&cmd, 0, sizeof(cmd)); |
| cmd.mall.header.type = DMUB_CMD__MALL; |
| cmd.mall.header.sub_type = DMUB_CMD__MALL_ACTION_DISALLOW; |
| cmd.mall.header.payload_bytes = |
| sizeof(cmd.mall) - sizeof(cmd.mall.header); |
| |
| dc_dmub_srv_cmd_queue(dc->ctx->dmub_srv, &cmd); |
| dc_dmub_srv_cmd_execute(dc->ctx->dmub_srv); |
| dc_dmub_srv_wait_idle(dc->ctx->dmub_srv); |
| |
| return true; |
| } |
| |
| bool dcn30_does_plane_fit_in_mall(struct dc *dc, struct dc_plane_state *plane, struct dc_cursor_attributes *cursor_attr) |
| { |
| // add meta size? |
| unsigned int surface_size = plane->plane_size.surface_pitch * plane->plane_size.surface_size.height * |
| (plane->format >= SURFACE_PIXEL_FORMAT_GRPH_ARGB16161616 ? 8 : 4); |
| unsigned int mall_size = dc->caps.mall_size_total; |
| unsigned int cursor_size = 0; |
| |
| if (dc->debug.mall_size_override) |
| mall_size = 1024 * 1024 * dc->debug.mall_size_override; |
| |
| if (cursor_attr) { |
| cursor_size = dc->caps.max_cursor_size * dc->caps.max_cursor_size; |
| |
| switch (cursor_attr->color_format) { |
| case CURSOR_MODE_MONO: |
| cursor_size /= 2; |
| break; |
| case CURSOR_MODE_COLOR_1BIT_AND: |
| case CURSOR_MODE_COLOR_PRE_MULTIPLIED_ALPHA: |
| case CURSOR_MODE_COLOR_UN_PRE_MULTIPLIED_ALPHA: |
| cursor_size *= 4; |
| break; |
| |
| case CURSOR_MODE_COLOR_64BIT_FP_PRE_MULTIPLIED: |
| case CURSOR_MODE_COLOR_64BIT_FP_UN_PRE_MULTIPLIED: |
| cursor_size *= 8; |
| break; |
| } |
| } |
| |
| return (surface_size + cursor_size) < mall_size; |
| } |
| |
| void dcn30_hardware_release(struct dc *dc) |
| { |
| bool subvp_in_use = false; |
| uint32_t i; |
| |
| dc_dmub_srv_p_state_delegate(dc, false, NULL); |
| dc_dmub_setup_subvp_dmub_command(dc, dc->current_state, false); |
| |
| /* SubVP treated the same way as FPO. If driver disable and |
| * we are using a SubVP config, disable and force on DCN side |
| * to prevent P-State hang on driver enable. |
| */ |
| for (i = 0; i < dc->res_pool->pipe_count; i++) { |
| struct pipe_ctx *pipe = &dc->current_state->res_ctx.pipe_ctx[i]; |
| |
| if (!pipe->stream) |
| continue; |
| |
| if (pipe->stream->mall_stream_config.type == SUBVP_MAIN) { |
| subvp_in_use = true; |
| break; |
| } |
| } |
| /* If pstate unsupported, or still supported |
| * by firmware, force it supported by dcn |
| */ |
| if (dc->current_state) |
| if ((!dc->clk_mgr->clks.p_state_change_support || subvp_in_use || |
| dc->current_state->bw_ctx.bw.dcn.clk.fw_based_mclk_switching) && |
| dc->res_pool->hubbub->funcs->force_pstate_change_control) |
| dc->res_pool->hubbub->funcs->force_pstate_change_control( |
| dc->res_pool->hubbub, true, true); |
| } |
| |
| void dcn30_set_disp_pattern_generator(const struct dc *dc, |
| struct pipe_ctx *pipe_ctx, |
| enum controller_dp_test_pattern test_pattern, |
| enum controller_dp_color_space color_space, |
| enum dc_color_depth color_depth, |
| const struct tg_color *solid_color, |
| int width, int height, int offset) |
| { |
| pipe_ctx->stream_res.opp->funcs->opp_set_disp_pattern_generator(pipe_ctx->stream_res.opp, test_pattern, |
| color_space, color_depth, solid_color, width, height, offset); |
| } |
| |
| void dcn30_prepare_bandwidth(struct dc *dc, |
| struct dc_state *context) |
| { |
| if (dc->clk_mgr->dc_mode_softmax_enabled) |
| if (dc->clk_mgr->clks.dramclk_khz <= dc->clk_mgr->bw_params->dc_mode_softmax_memclk * 1000 && |
| context->bw_ctx.bw.dcn.clk.dramclk_khz > dc->clk_mgr->bw_params->dc_mode_softmax_memclk * 1000) |
| dc->clk_mgr->funcs->set_max_memclk(dc->clk_mgr, dc->clk_mgr->bw_params->clk_table.entries[dc->clk_mgr->bw_params->clk_table.num_entries - 1].memclk_mhz); |
| |
| dcn20_prepare_bandwidth(dc, context); |
| |
| dc_dmub_srv_p_state_delegate(dc, |
| context->bw_ctx.bw.dcn.clk.fw_based_mclk_switching, context); |
| } |
| |