| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2018-2019 Purism SPC |
| */ |
| |
| /dts-v1/; |
| |
| #include "dt-bindings/input/input.h" |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/leds/common.h> |
| #include "dt-bindings/pwm/pwm.h" |
| #include "dt-bindings/usb/pd.h" |
| #include "imx8mq.dtsi" |
| |
| / { |
| model = "Purism Librem 5 devkit"; |
| compatible = "purism,librem5-devkit", "fsl,imx8mq"; |
| |
| backlight_dsi: backlight-dsi { |
| compatible = "pwm-backlight"; |
| /* 200 Hz for the PAM2841 */ |
| pwms = <&pwm1 0 5000000 0>; |
| brightness-levels = <0 100>; |
| num-interpolated-steps = <100>; |
| /* Default brightness level (index into the array defined by */ |
| /* the "brightness-levels" property) */ |
| default-brightness-level = <0>; |
| power-supply = <®_22v4_p>; |
| }; |
| |
| chosen { |
| stdout-path = &uart1; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gpio_keys>; |
| |
| button-1 { |
| label = "VOL_UP"; |
| gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; |
| wakeup-source; |
| linux,code = <KEY_VOLUMEUP>; |
| }; |
| |
| button-2 { |
| label = "VOL_DOWN"; |
| gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; |
| wakeup-source; |
| linux,code = <KEY_VOLUMEDOWN>; |
| }; |
| |
| button-3 { |
| label = "WWAN_WAKE"; |
| gpios = <&gpio3 8 GPIO_ACTIVE_LOW>; |
| interrupt-parent = <&gpio3>; |
| interrupts = <8 IRQ_TYPE_LEVEL_LOW>; |
| wakeup-source; |
| linux,code = <KEY_PHONE>; |
| }; |
| }; |
| |
| leds { |
| compatible = "pwm-leds"; |
| |
| led1 { |
| function = LED_FUNCTION_STATUS; |
| color = <LED_COLOR_ID_RED>; |
| max-brightness = <248>; |
| pwms = <&pwm2 0 50000 0>; |
| }; |
| }; |
| |
| pmic_osc: clock-pmic { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <32768>; |
| clock-output-names = "pmic_osc"; |
| }; |
| |
| reg_1v8_p: regulator-1v8-p { |
| compatible = "regulator-fixed"; |
| regulator-name = "1v8_p"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| vin-supply = <®_pwr_en>; |
| }; |
| |
| reg_2v8_p: regulator-2v8-p { |
| compatible = "regulator-fixed"; |
| regulator-name = "2v8_p"; |
| regulator-min-microvolt = <2800000>; |
| regulator-max-microvolt = <2800000>; |
| vin-supply = <®_pwr_en>; |
| }; |
| |
| reg_3v3_p: regulator-3v3-p { |
| compatible = "regulator-fixed"; |
| regulator-name = "3v3_p"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| vin-supply = <®_pwr_en>; |
| |
| regulator-state-mem { |
| regulator-on-in-suspend; |
| }; |
| }; |
| |
| reg_5v_p: regulator-5v-p { |
| compatible = "regulator-fixed"; |
| regulator-name = "5v_p"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| vin-supply = <®_pwr_en>; |
| |
| regulator-state-mem { |
| regulator-on-in-suspend; |
| }; |
| }; |
| |
| reg_22v4_p: regulator-22v4-p { |
| compatible = "regulator-fixed"; |
| regulator-name = "22v4_P"; |
| regulator-min-microvolt = <22400000>; |
| regulator-max-microvolt = <22400000>; |
| vin-supply = <®_pwr_en>; |
| }; |
| |
| reg_pwr_en: regulator-pwr-en { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwr_en>; |
| regulator-name = "PWR_EN"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| regulator-always-on; |
| }; |
| |
| reg_usdhc2_vmmc: regulator-usdhc2-vmmc { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc2_pwr>; |
| regulator-name = "VSD_3V3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| regulator-always-on; |
| }; |
| |
| wwan_codec: sound-wwan-codec { |
| compatible = "option,gtm601"; |
| #sound-dai-cells = <0>; |
| }; |
| |
| mic_mux: mic-mux { |
| compatible = "simple-audio-mux"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_micsel>; |
| mux-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>; |
| sound-name-prefix = "Mic Mux"; |
| }; |
| |
| sound { |
| compatible = "simple-audio-card"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_hpdet>; |
| simple-audio-card,aux-devs = <&speaker_amp>, <&mic_mux>; |
| simple-audio-card,name = "Librem 5 Devkit"; |
| simple-audio-card,format = "i2s"; |
| simple-audio-card,widgets = |
| "Microphone", "Builtin Microphone", |
| "Microphone", "Headset Microphone", |
| "Headphone", "Headphones", |
| "Speaker", "Builtin Speaker"; |
| simple-audio-card,routing = |
| "MIC_IN", "Mic Mux OUT", |
| "Mic Mux IN1", "Headset Microphone", |
| "Mic Mux IN2", "Builtin Microphone", |
| "Mic Mux OUT", "Mic Bias", |
| "Headphones", "HP_OUT", |
| "Builtin Speaker", "Speaker Amp OUTR", |
| "Speaker Amp INR", "LINE_OUT"; |
| simple-audio-card,hp-det-gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>; |
| |
| simple-audio-card,cpu { |
| sound-dai = <&sai2>; |
| }; |
| |
| simple-audio-card,codec { |
| sound-dai = <&sgtl5000>; |
| clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>; |
| frame-master; |
| bitclock-master; |
| }; |
| }; |
| |
| sound-wwan { |
| compatible = "simple-audio-card"; |
| simple-audio-card,name = "SIMCom SIM7100"; |
| simple-audio-card,format = "dsp_a"; |
| |
| simple-audio-card,cpu { |
| sound-dai = <&sai6>; |
| }; |
| |
| telephony_link_master: simple-audio-card,codec { |
| sound-dai = <&wwan_codec>; |
| frame-master; |
| bitclock-master; |
| }; |
| }; |
| |
| speaker_amp: speaker-amp { |
| compatible = "simple-audio-amplifier"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_spkamp>; |
| VCC-supply = <®_3v3_p>; |
| sound-name-prefix = "Speaker Amp"; |
| enable-gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| vibrator { |
| compatible = "gpio-vibrator"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_haptic>; |
| enable-gpios = <&gpio5 4 GPIO_ACTIVE_LOW>; |
| vcc-supply = <®_3v3_p>; |
| }; |
| |
| wifi_pwr_en: regulator-wifi-en { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_wifi_pwr_en>; |
| regulator-name = "WIFI_EN"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| regulator-always-on; |
| }; |
| }; |
| |
| &A53_0 { |
| cpu-supply = <&buck2_reg>; |
| }; |
| |
| &A53_1 { |
| cpu-supply = <&buck2_reg>; |
| }; |
| |
| &A53_2 { |
| cpu-supply = <&buck2_reg>; |
| }; |
| |
| &A53_3 { |
| cpu-supply = <&buck2_reg>; |
| }; |
| |
| &dphy { |
| status = "okay"; |
| }; |
| |
| &fec1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_fec1>; |
| phy-mode = "rgmii-id"; |
| phy-handle = <ðphy0>; |
| fsl,magic-packet; |
| phy-supply = <®_3v3_p>; |
| status = "okay"; |
| |
| mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ethphy0: ethernet-phy@1 { |
| compatible = "ethernet-phy-ieee802.3-c22"; |
| reg = <1>; |
| }; |
| }; |
| }; |
| |
| &i2c1 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c1>; |
| status = "okay"; |
| |
| pmic: pmic@4b { |
| compatible = "rohm,bd71837"; |
| reg = <0x4b>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pmic>; |
| clocks = <&pmic_osc>; |
| clock-names = "osc"; |
| #clock-cells = <0>; |
| clock-output-names = "pmic_clk"; |
| interrupt-parent = <&gpio1>; |
| interrupts = <3 IRQ_TYPE_LEVEL_LOW>; |
| rohm,reset-snvs-powered; |
| |
| regulators { |
| buck1_reg: BUCK1 { |
| regulator-name = "buck1"; |
| regulator-min-microvolt = <700000>; |
| regulator-max-microvolt = <1300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-ramp-delay = <1250>; |
| rohm,dvs-run-voltage = <900000>; |
| rohm,dvs-idle-voltage = <850000>; |
| rohm,dvs-suspend-voltage = <800000>; |
| }; |
| |
| buck2_reg: BUCK2 { |
| regulator-name = "buck2"; |
| regulator-min-microvolt = <700000>; |
| regulator-max-microvolt = <1300000>; |
| regulator-boot-on; |
| regulator-ramp-delay = <1250>; |
| rohm,dvs-run-voltage = <1000000>; |
| rohm,dvs-idle-voltage = <900000>; |
| }; |
| |
| buck3_reg: BUCK3 { |
| regulator-name = "buck3"; |
| regulator-min-microvolt = <700000>; |
| regulator-max-microvolt = <1300000>; |
| regulator-boot-on; |
| rohm,dvs-run-voltage = <900000>; |
| }; |
| |
| buck4_reg: BUCK4 { |
| regulator-name = "buck4"; |
| regulator-min-microvolt = <700000>; |
| regulator-max-microvolt = <1300000>; |
| rohm,dvs-run-voltage = <1000000>; |
| }; |
| |
| buck5_reg: BUCK5 { |
| regulator-name = "buck5"; |
| regulator-min-microvolt = <700000>; |
| regulator-max-microvolt = <1350000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| buck6_reg: BUCK6 { |
| regulator-name = "buck6"; |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| buck7_reg: BUCK7 { |
| regulator-name = "buck7"; |
| regulator-min-microvolt = <1605000>; |
| regulator-max-microvolt = <1995000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| buck8_reg: BUCK8 { |
| regulator-name = "buck8"; |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <1400000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| ldo1_reg: LDO1 { |
| regulator-name = "ldo1"; |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| /* leave on for snvs power button */ |
| regulator-always-on; |
| }; |
| |
| ldo2_reg: LDO2 { |
| regulator-name = "ldo2"; |
| regulator-min-microvolt = <900000>; |
| regulator-max-microvolt = <900000>; |
| regulator-boot-on; |
| /* leave on for snvs power button */ |
| regulator-always-on; |
| }; |
| |
| ldo3_reg: LDO3 { |
| regulator-name = "ldo3"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| ldo4_reg: LDO4 { |
| regulator-name = "ldo4"; |
| regulator-min-microvolt = <900000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| ldo5_reg: LDO5 { |
| regulator-name = "ldo5"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| ldo6_reg: LDO6 { |
| regulator-name = "ldo6"; |
| regulator-min-microvolt = <900000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| ldo7_reg: LDO7 { |
| regulator-name = "ldo7"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| }; |
| }; |
| |
| typec_ptn5100: usb-typec@52 { |
| compatible = "nxp,ptn5110"; |
| reg = <0x52>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_typec>; |
| interrupt-parent = <&gpio3>; |
| interrupts = <1 IRQ_TYPE_LEVEL_LOW>; |
| |
| connector { |
| compatible = "usb-c-connector"; |
| label = "USB-C"; |
| data-role = "dual"; |
| power-role = "dual"; |
| try-power-role = "sink"; |
| source-pdos = <PDO_FIXED(5000, 2000, |
| PDO_FIXED_USB_COMM | |
| PDO_FIXED_DUAL_ROLE | |
| PDO_FIXED_DATA_SWAP )>; |
| sink-pdos = <PDO_FIXED(5000, 3500, PDO_FIXED_USB_COMM | |
| PDO_FIXED_DUAL_ROLE | |
| PDO_FIXED_DATA_SWAP ) |
| PDO_VAR(5000, 5000, 3500)>; |
| op-sink-microwatt = <10000000>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| usb_con_hs: endpoint { |
| remote-endpoint = <&typec_hs>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| usb_con_ss: endpoint { |
| remote-endpoint = <&typec_ss>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| rtc@68 { |
| compatible = "microcrystal,rv4162"; |
| reg = <0x68>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_rtc>; |
| interrupt-parent = <&gpio4>; |
| interrupts = <29 IRQ_TYPE_LEVEL_LOW>; |
| }; |
| |
| charger@6b { /* bq25896 */ |
| compatible = "ti,bq25890"; |
| reg = <0x6b>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_charger>; |
| interrupt-parent = <&gpio3>; |
| interrupts = <25 IRQ_TYPE_EDGE_FALLING>; |
| ti,battery-regulation-voltage = <4192000>; /* 4.192V */ |
| ti,charge-current = <1600000>; /* 1.6A */ |
| ti,termination-current = <66000>; /* 66mA */ |
| ti,precharge-current = <130000>; /* 130mA */ |
| ti,minimum-sys-voltage = <3000000>; /* 3V */ |
| ti,boost-voltage = <5000000>; /* 5V */ |
| ti,boost-max-current = <50000>; /* 50mA */ |
| }; |
| }; |
| |
| &i2c3 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c3>; |
| status = "okay"; |
| |
| magnetometer@1e { |
| compatible = "st,lsm9ds1-magn"; |
| reg = <0x1e>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_imu>; |
| interrupt-parent = <&gpio3>; |
| interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; |
| vdd-supply = <®_3v3_p>; |
| vddio-supply = <®_3v3_p>; |
| }; |
| |
| sgtl5000: audio-codec@a { |
| compatible = "fsl,sgtl5000"; |
| clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>; |
| assigned-clocks = <&clk IMX8MQ_CLK_SAI2>; |
| assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; |
| assigned-clock-rates = <24576000>; |
| #sound-dai-cells = <0>; |
| reg = <0x0a>; |
| VDDD-supply = <®_1v8_p>; |
| VDDIO-supply = <®_3v3_p>; |
| VDDA-supply = <®_3v3_p>; |
| }; |
| |
| touchscreen@5d { |
| compatible = "goodix,gt5688"; |
| reg = <0x5d>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ts>; |
| interrupt-parent = <&gpio3>; |
| interrupts = <0 IRQ_TYPE_LEVEL_LOW>; |
| reset-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; |
| irq-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; |
| touchscreen-size-x = <720>; |
| touchscreen-size-y = <1440>; |
| AVDD28-supply = <®_2v8_p>; |
| VDDIO-supply = <®_1v8_p>; |
| }; |
| |
| proximity-sensor@60 { |
| compatible = "vishay,vcnl4040"; |
| reg = <0x60>; |
| pinctrl-0 = <&pinctrl_prox>; |
| }; |
| |
| accel-gyro@6a { |
| compatible = "st,lsm9ds1-imu"; |
| reg = <0x6a>; |
| vdd-supply = <®_3v3_p>; |
| vddio-supply = <®_3v3_p>; |
| mount-matrix = "1", "0", "0", |
| "0", "1", "0", |
| "0", "0", "-1"; |
| }; |
| }; |
| |
| &iomuxc { |
| pinctrl_bl: blgrp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_GPIO1_IO01_PWM1_OUT 0x6 /* DSI_BL_PWM */ |
| >; |
| }; |
| |
| pinctrl_bt: btgrp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11 0x16 /* nBT_DISABLE */ |
| MX8MQ_IOMUXC_NAND_DATA01_GPIO3_IO7 0x10 /* BT_HOST_WAKE */ |
| >; |
| }; |
| |
| pinctrl_charger: chargergrp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x80 /* CHRG_nINT */ |
| >; |
| }; |
| |
| pinctrl_fec1: fec1grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3 |
| MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 |
| MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f |
| MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f |
| MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f |
| MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f |
| MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 |
| MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 |
| MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 |
| MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 |
| MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f |
| MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 |
| MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 |
| MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f |
| MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 |
| MX8MQ_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2 0x1f |
| >; |
| }; |
| |
| pinctrl_ts: tsgrp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_NAND_ALE_GPIO3_IO0 0x16 /* TOUCH INT */ |
| MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x19 /* TOUCH RST */ |
| >; |
| }; |
| |
| pinctrl_pwm_led: pwmledgrp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_GPIO1_IO13_PWM2_OUT 0x16 |
| >; |
| }; |
| |
| pinctrl_gpio_keys: gpiokeygrp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x16 |
| MX8MQ_IOMUXC_SAI2_RXC_GPIO4_IO22 0x16 |
| MX8MQ_IOMUXC_NAND_DATA02_GPIO3_IO8 0x80 /* nWoWWAN */ |
| >; |
| }; |
| |
| pinctrl_haptic: hapticgrp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_SPDIF_RX_GPIO5_IO4 0xc6 /* nHAPTIC */ |
| >; |
| }; |
| |
| pinctrl_hpdet: hpdetgrp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20 0xC0 /* HP_DET */ |
| >; |
| }; |
| |
| pinctrl_i2c1: i2c1grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000001f |
| MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000001f |
| >; |
| }; |
| |
| pinctrl_i2c3: i2c3grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x4000001f |
| MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x4000001f |
| >; |
| }; |
| |
| pinctrl_imu: imugrp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_SAI5_RXFS_GPIO3_IO19 0x8 /* IMU_INT */ |
| >; |
| }; |
| |
| pinctrl_micsel: micselgrp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0xc6 /* MIC_SEL */ |
| >; |
| }; |
| |
| pinctrl_spkamp: spkamp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_SPDIF_TX_GPIO5_IO3 0x81 /* MUTE */ |
| >; |
| }; |
| |
| pinctrl_pmic: pmicgrp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x80 /* PMIC intr */ |
| >; |
| }; |
| |
| pinctrl_prox: proxgrp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x80 /* prox intr */ |
| >; |
| }; |
| |
| pinctrl_pwr_en: pwrengrp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x06 |
| >; |
| }; |
| |
| pinctrl_rtc: rtcgrp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_SAI3_RXC_GPIO4_IO29 0x80 /* RTC intr */ |
| >; |
| }; |
| |
| pinctrl_sai2: sai2grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6 |
| MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6 |
| MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6 |
| MX8MQ_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0xd6 |
| MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK 0xd6 |
| >; |
| }; |
| |
| pinctrl_sai6: sai6grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_SAI1_RXD5_SAI6_RX_DATA0 0xd6 |
| MX8MQ_IOMUXC_SAI1_RXD6_SAI6_RX_SYNC 0xd6 |
| MX8MQ_IOMUXC_SAI1_TXD4_SAI6_RX_BCLK 0xd6 |
| MX8MQ_IOMUXC_SAI1_TXD5_SAI6_TX_DATA0 0xd6 |
| >; |
| }; |
| |
| pinctrl_typec: typecgrp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12 0x16 |
| MX8MQ_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x80 |
| >; |
| }; |
| |
| pinctrl_uart1: uart1grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49 |
| MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49 |
| >; |
| }; |
| |
| pinctrl_uart2: uart2grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x49 |
| MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x49 |
| MX8MQ_IOMUXC_UART4_RXD_UART2_DCE_CTS_B 0x49 |
| MX8MQ_IOMUXC_UART4_TXD_UART2_DCE_RTS_B 0x49 |
| >; |
| }; |
| |
| pinctrl_uart3: uart3grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX 0x49 |
| MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX 0x49 |
| >; |
| }; |
| |
| pinctrl_uart4: uart4grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX 0x49 |
| MX8MQ_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX 0x49 |
| MX8MQ_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B 0x49 |
| MX8MQ_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B 0x49 |
| MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x49 |
| >; |
| }; |
| |
| pinctrl_usdhc1: usdhc1grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83 |
| MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3 |
| MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3 |
| MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3 |
| MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3 |
| MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3 |
| MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3 |
| MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3 |
| MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3 |
| MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3 |
| MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83 |
| MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 |
| >; |
| }; |
| |
| pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d |
| MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd |
| MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xcd |
| MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xcd |
| MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xcd |
| MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xcd |
| MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xcd |
| MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xcd |
| MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xcd |
| MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xcd |
| MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x8d |
| MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 |
| >; |
| }; |
| |
| pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f |
| MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf |
| MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xdf |
| MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xdf |
| MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xdf |
| MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xdf |
| MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xdf |
| MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xdf |
| MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xdf |
| MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xdf |
| MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x9f |
| MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 |
| >; |
| }; |
| |
| pinctrl_usdhc2_pwr: usdhc2pwrgrp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 |
| >; |
| }; |
| |
| pinctrl_usdhc2_gpio: usdhc2gpiogrp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_SD2_WP_GPIO2_IO20 0x80 /* WIFI_WAKE */ |
| >; |
| }; |
| |
| pinctrl_usdhc2: usdhc2grp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83 |
| MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3 |
| MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3 |
| MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3 |
| MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3 |
| MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3 |
| >; |
| }; |
| |
| pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x8d |
| MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcd |
| MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xcd |
| MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcd |
| MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcd |
| MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcd |
| >; |
| }; |
| |
| pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x9f |
| MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcf |
| MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xcf |
| MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcf |
| MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcf |
| MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcf |
| >; |
| }; |
| |
| pinctrl_wdog: wdoggrp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 |
| >; |
| }; |
| |
| pinctrl_wifi_pwr_en: wifipwrengrp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5 0x06 |
| >; |
| }; |
| |
| pinctrl_wwan: wwangrp { |
| fsl,pins = < |
| MX8MQ_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x09 /* nWWAN_DISABLE */ |
| MX8MQ_IOMUXC_NAND_DATA02_GPIO3_IO8 0x80 /* nWoWWAN */ |
| MX8MQ_IOMUXC_NAND_DATA03_GPIO3_IO9 0x19 /* WWAN_RESET */ |
| >; |
| }; |
| }; |
| |
| &lcdif { |
| status = "okay"; |
| }; |
| |
| &mipi_dsi { |
| status = "okay"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| panel@0 { |
| compatible = "rocktech,jh057n00900"; |
| reg = <0>; |
| backlight = <&backlight_dsi>; |
| reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>; |
| iovcc-supply = <®_1v8_p>; |
| vcc-supply = <®_2v8_p>; |
| port { |
| panel_in: endpoint { |
| remote-endpoint = <&mipi_dsi_out>; |
| }; |
| }; |
| }; |
| |
| ports { |
| port@1 { |
| reg = <1>; |
| mipi_dsi_out: endpoint { |
| remote-endpoint = <&panel_in>; |
| }; |
| }; |
| }; |
| }; |
| |
| &pgc_gpu { |
| power-supply = <&buck3_reg>; |
| }; |
| |
| &pgc_vpu { |
| power-supply = <&buck4_reg>; |
| }; |
| |
| &pwm1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_bl>; |
| status = "okay"; |
| }; |
| |
| &pwm2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm_led>; |
| status = "okay"; |
| }; |
| |
| &snvs_pwrkey { |
| status = "okay"; |
| }; |
| |
| &snvs_rtc { |
| status = "disabled"; |
| }; |
| |
| &sai2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_sai2>; |
| assigned-clocks = <&clk IMX8MQ_CLK_SAI2>; |
| assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; |
| assigned-clock-rates = <24576000>; |
| status = "okay"; |
| }; |
| |
| &sai6 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_sai6>; |
| assigned-clocks = <&clk IMX8MQ_CLK_SAI6>; |
| assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; |
| assigned-clock-rates = <24576000>; |
| fsl,sai-synchronous-rx; |
| status = "okay"; |
| }; |
| |
| &uart1 { /* console */ |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1>; |
| status = "okay"; |
| }; |
| |
| &uart3 { /* GNSS */ |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart3>; |
| status = "okay"; |
| }; |
| |
| &uart4 { /* BT */ |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart4>, <&pinctrl_bt>; |
| uart-has-rtscts; |
| status = "okay"; |
| }; |
| |
| &usb3_phy0 { |
| vbus-supply = <®_5v_p>; |
| status = "okay"; |
| }; |
| |
| &usb3_phy1 { |
| vbus-supply = <®_5v_p>; |
| status = "okay"; |
| }; |
| |
| &usb_dwc3_0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| dr_mode = "otg"; |
| status = "okay"; |
| |
| port@0 { |
| reg = <0>; |
| |
| typec_hs: endpoint { |
| remote-endpoint = <&usb_con_hs>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| typec_ss: endpoint { |
| remote-endpoint = <&usb_con_ss>; |
| }; |
| }; |
| }; |
| |
| &usb_dwc3_1 { |
| dr_mode = "host"; |
| status = "okay"; |
| }; |
| |
| &usdhc1 { |
| assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>; |
| assigned-clock-rates = <400000000>; |
| pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| pinctrl-0 = <&pinctrl_usdhc1>; |
| pinctrl-1 = <&pinctrl_usdhc1_100mhz>; |
| pinctrl-2 = <&pinctrl_usdhc1_200mhz>; |
| bus-width = <8>; |
| non-removable; |
| status = "okay"; |
| }; |
| |
| &usdhc2 { |
| assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>; |
| assigned-clock-rates = <200000000>; |
| pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| pinctrl-0 = <&pinctrl_usdhc2>; |
| pinctrl-1 = <&pinctrl_usdhc2_100mhz>; |
| pinctrl-2 = <&pinctrl_usdhc2_200mhz>; |
| bus-width = <4>; |
| vmmc-supply = <®_usdhc2_vmmc>; |
| power-supply = <&wifi_pwr_en>; |
| broken-cd; |
| disable-wp; |
| cap-sdio-irq; |
| keep-power-in-suspend; |
| wakeup-source; |
| status = "okay"; |
| }; |
| |
| &wdog1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_wdog>; |
| fsl,ext-reset-output; |
| status = "okay"; |
| }; |
