| /* |
| * linux/drivers/net/irda/pxaficp_ir.c |
| * |
| * Based on sa1100_ir.c by Russell King |
| * |
| * Changes copyright (C) 2003-2005 MontaVista Software, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * Infra-red driver (SIR/FIR) for the PXA2xx embedded microprocessor |
| * |
| */ |
| #include <linux/module.h> |
| #include <linux/netdevice.h> |
| #include <linux/platform_device.h> |
| #include <linux/clk.h> |
| |
| #include <net/irda/irda.h> |
| #include <net/irda/irmod.h> |
| #include <net/irda/wrapper.h> |
| #include <net/irda/irda_device.h> |
| |
| #include <mach/dma.h> |
| #include <mach/irda.h> |
| #include <mach/hardware.h> |
| #include <mach/pxa-regs.h> |
| |
| #define IrSR_RXPL_NEG_IS_ZERO (1<<4) |
| #define IrSR_RXPL_POS_IS_ZERO 0x0 |
| #define IrSR_TXPL_NEG_IS_ZERO (1<<3) |
| #define IrSR_TXPL_POS_IS_ZERO 0x0 |
| #define IrSR_XMODE_PULSE_1_6 (1<<2) |
| #define IrSR_XMODE_PULSE_3_16 0x0 |
| #define IrSR_RCVEIR_IR_MODE (1<<1) |
| #define IrSR_RCVEIR_UART_MODE 0x0 |
| #define IrSR_XMITIR_IR_MODE (1<<0) |
| #define IrSR_XMITIR_UART_MODE 0x0 |
| |
| #define IrSR_IR_RECEIVE_ON (\ |
| IrSR_RXPL_NEG_IS_ZERO | \ |
| IrSR_TXPL_POS_IS_ZERO | \ |
| IrSR_XMODE_PULSE_3_16 | \ |
| IrSR_RCVEIR_IR_MODE | \ |
| IrSR_XMITIR_UART_MODE) |
| |
| #define IrSR_IR_TRANSMIT_ON (\ |
| IrSR_RXPL_NEG_IS_ZERO | \ |
| IrSR_TXPL_POS_IS_ZERO | \ |
| IrSR_XMODE_PULSE_3_16 | \ |
| IrSR_RCVEIR_UART_MODE | \ |
| IrSR_XMITIR_IR_MODE) |
| |
| struct pxa_irda { |
| int speed; |
| int newspeed; |
| unsigned long last_oscr; |
| |
| unsigned char *dma_rx_buff; |
| unsigned char *dma_tx_buff; |
| dma_addr_t dma_rx_buff_phy; |
| dma_addr_t dma_tx_buff_phy; |
| unsigned int dma_tx_buff_len; |
| int txdma; |
| int rxdma; |
| |
| struct net_device_stats stats; |
| struct irlap_cb *irlap; |
| struct qos_info qos; |
| |
| iobuff_t tx_buff; |
| iobuff_t rx_buff; |
| |
| struct device *dev; |
| struct pxaficp_platform_data *pdata; |
| struct clk *fir_clk; |
| struct clk *sir_clk; |
| struct clk *cur_clk; |
| }; |
| |
| static inline void pxa_irda_disable_clk(struct pxa_irda *si) |
| { |
| if (si->cur_clk) |
| clk_disable(si->cur_clk); |
| si->cur_clk = NULL; |
| } |
| |
| static inline void pxa_irda_enable_firclk(struct pxa_irda *si) |
| { |
| si->cur_clk = si->fir_clk; |
| clk_enable(si->fir_clk); |
| } |
| |
| static inline void pxa_irda_enable_sirclk(struct pxa_irda *si) |
| { |
| si->cur_clk = si->sir_clk; |
| clk_enable(si->sir_clk); |
| } |
| |
| |
| #define IS_FIR(si) ((si)->speed >= 4000000) |
| #define IRDA_FRAME_SIZE_LIMIT 2047 |
| |
| inline static void pxa_irda_fir_dma_rx_start(struct pxa_irda *si) |
| { |
| DCSR(si->rxdma) = DCSR_NODESC; |
| DSADR(si->rxdma) = __PREG(ICDR); |
| DTADR(si->rxdma) = si->dma_rx_buff_phy; |
| DCMD(si->rxdma) = DCMD_INCTRGADDR | DCMD_FLOWSRC | DCMD_WIDTH1 | DCMD_BURST32 | IRDA_FRAME_SIZE_LIMIT; |
| DCSR(si->rxdma) |= DCSR_RUN; |
| } |
| |
| inline static void pxa_irda_fir_dma_tx_start(struct pxa_irda *si) |
| { |
| DCSR(si->txdma) = DCSR_NODESC; |
| DSADR(si->txdma) = si->dma_tx_buff_phy; |
| DTADR(si->txdma) = __PREG(ICDR); |
| DCMD(si->txdma) = DCMD_INCSRCADDR | DCMD_FLOWTRG | DCMD_ENDIRQEN | DCMD_WIDTH1 | DCMD_BURST32 | si->dma_tx_buff_len; |
| DCSR(si->txdma) |= DCSR_RUN; |
| } |
| |
| /* |
| * Set the IrDA communications speed. |
| */ |
| static int pxa_irda_set_speed(struct pxa_irda *si, int speed) |
| { |
| unsigned long flags; |
| unsigned int divisor; |
| |
| switch (speed) { |
| case 9600: case 19200: case 38400: |
| case 57600: case 115200: |
| |
| /* refer to PXA250/210 Developer's Manual 10-7 */ |
| /* BaudRate = 14.7456 MHz / (16*Divisor) */ |
| divisor = 14745600 / (16 * speed); |
| |
| local_irq_save(flags); |
| |
| if (IS_FIR(si)) { |
| /* stop RX DMA */ |
| DCSR(si->rxdma) &= ~DCSR_RUN; |
| /* disable FICP */ |
| ICCR0 = 0; |
| pxa_irda_disable_clk(si); |
| |
| /* set board transceiver to SIR mode */ |
| si->pdata->transceiver_mode(si->dev, IR_SIRMODE); |
| |
| /* enable the STUART clock */ |
| pxa_irda_enable_sirclk(si); |
| } |
| |
| /* disable STUART first */ |
| STIER = 0; |
| |
| /* access DLL & DLH */ |
| STLCR |= LCR_DLAB; |
| STDLL = divisor & 0xff; |
| STDLH = divisor >> 8; |
| STLCR &= ~LCR_DLAB; |
| |
| si->speed = speed; |
| STISR = IrSR_IR_RECEIVE_ON | IrSR_XMODE_PULSE_1_6; |
| STIER = IER_UUE | IER_RLSE | IER_RAVIE | IER_RTIOE; |
| |
| local_irq_restore(flags); |
| break; |
| |
| case 4000000: |
| local_irq_save(flags); |
| |
| /* disable STUART */ |
| STIER = 0; |
| STISR = 0; |
| pxa_irda_disable_clk(si); |
| |
| /* disable FICP first */ |
| ICCR0 = 0; |
| |
| /* set board transceiver to FIR mode */ |
| si->pdata->transceiver_mode(si->dev, IR_FIRMODE); |
| |
| /* enable the FICP clock */ |
| pxa_irda_enable_firclk(si); |
| |
| si->speed = speed; |
| pxa_irda_fir_dma_rx_start(si); |
| ICCR0 = ICCR0_ITR | ICCR0_RXE; |
| |
| local_irq_restore(flags); |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| /* SIR interrupt service routine. */ |
| static irqreturn_t pxa_irda_sir_irq(int irq, void *dev_id) |
| { |
| struct net_device *dev = dev_id; |
| struct pxa_irda *si = netdev_priv(dev); |
| int iir, lsr, data; |
| |
| iir = STIIR; |
| |
| switch (iir & 0x0F) { |
| case 0x06: /* Receiver Line Status */ |
| lsr = STLSR; |
| while (lsr & LSR_FIFOE) { |
| data = STRBR; |
| if (lsr & (LSR_OE | LSR_PE | LSR_FE | LSR_BI)) { |
| printk(KERN_DEBUG "pxa_ir: sir receiving error\n"); |
| si->stats.rx_errors++; |
| if (lsr & LSR_FE) |
| si->stats.rx_frame_errors++; |
| if (lsr & LSR_OE) |
| si->stats.rx_fifo_errors++; |
| } else { |
| si->stats.rx_bytes++; |
| async_unwrap_char(dev, &si->stats, &si->rx_buff, data); |
| } |
| lsr = STLSR; |
| } |
| dev->last_rx = jiffies; |
| si->last_oscr = OSCR; |
| break; |
| |
| case 0x04: /* Received Data Available */ |
| /* forth through */ |
| |
| case 0x0C: /* Character Timeout Indication */ |
| do { |
| si->stats.rx_bytes++; |
| async_unwrap_char(dev, &si->stats, &si->rx_buff, STRBR); |
| } while (STLSR & LSR_DR); |
| dev->last_rx = jiffies; |
| si->last_oscr = OSCR; |
| break; |
| |
| case 0x02: /* Transmit FIFO Data Request */ |
| while ((si->tx_buff.len) && (STLSR & LSR_TDRQ)) { |
| STTHR = *si->tx_buff.data++; |
| si->tx_buff.len -= 1; |
| } |
| |
| if (si->tx_buff.len == 0) { |
| si->stats.tx_packets++; |
| si->stats.tx_bytes += si->tx_buff.data - |
| si->tx_buff.head; |
| |
| /* We need to ensure that the transmitter has finished. */ |
| while ((STLSR & LSR_TEMT) == 0) |
| cpu_relax(); |
| si->last_oscr = OSCR; |
| |
| /* |
| * Ok, we've finished transmitting. Now enable |
| * the receiver. Sometimes we get a receive IRQ |
| * immediately after a transmit... |
| */ |
| if (si->newspeed) { |
| pxa_irda_set_speed(si, si->newspeed); |
| si->newspeed = 0; |
| } else { |
| /* enable IR Receiver, disable IR Transmitter */ |
| STISR = IrSR_IR_RECEIVE_ON | IrSR_XMODE_PULSE_1_6; |
| /* enable STUART and receive interrupts */ |
| STIER = IER_UUE | IER_RLSE | IER_RAVIE | IER_RTIOE; |
| } |
| /* I'm hungry! */ |
| netif_wake_queue(dev); |
| } |
| break; |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* FIR Receive DMA interrupt handler */ |
| static void pxa_irda_fir_dma_rx_irq(int channel, void *data) |
| { |
| int dcsr = DCSR(channel); |
| |
| DCSR(channel) = dcsr & ~DCSR_RUN; |
| |
| printk(KERN_DEBUG "pxa_ir: fir rx dma bus error %#x\n", dcsr); |
| } |
| |
| /* FIR Transmit DMA interrupt handler */ |
| static void pxa_irda_fir_dma_tx_irq(int channel, void *data) |
| { |
| struct net_device *dev = data; |
| struct pxa_irda *si = netdev_priv(dev); |
| int dcsr; |
| |
| dcsr = DCSR(channel); |
| DCSR(channel) = dcsr & ~DCSR_RUN; |
| |
| if (dcsr & DCSR_ENDINTR) { |
| si->stats.tx_packets++; |
| si->stats.tx_bytes += si->dma_tx_buff_len; |
| } else { |
| si->stats.tx_errors++; |
| } |
| |
| while (ICSR1 & ICSR1_TBY) |
| cpu_relax(); |
| si->last_oscr = OSCR; |
| |
| /* |
| * HACK: It looks like the TBY bit is dropped too soon. |
| * Without this delay things break. |
| */ |
| udelay(120); |
| |
| if (si->newspeed) { |
| pxa_irda_set_speed(si, si->newspeed); |
| si->newspeed = 0; |
| } else { |
| int i = 64; |
| |
| ICCR0 = 0; |
| pxa_irda_fir_dma_rx_start(si); |
| while ((ICSR1 & ICSR1_RNE) && i--) |
| (void)ICDR; |
| ICCR0 = ICCR0_ITR | ICCR0_RXE; |
| |
| if (i < 0) |
| printk(KERN_ERR "pxa_ir: cannot clear Rx FIFO!\n"); |
| } |
| netif_wake_queue(dev); |
| } |
| |
| /* EIF(Error in FIFO/End in Frame) handler for FIR */ |
| static void pxa_irda_fir_irq_eif(struct pxa_irda *si, struct net_device *dev, int icsr0) |
| { |
| unsigned int len, stat, data; |
| |
| /* Get the current data position. */ |
| len = DTADR(si->rxdma) - si->dma_rx_buff_phy; |
| |
| do { |
| /* Read Status, and then Data. */ |
| stat = ICSR1; |
| rmb(); |
| data = ICDR; |
| |
| if (stat & (ICSR1_CRE | ICSR1_ROR)) { |
| si->stats.rx_errors++; |
| if (stat & ICSR1_CRE) { |
| printk(KERN_DEBUG "pxa_ir: fir receive CRC error\n"); |
| si->stats.rx_crc_errors++; |
| } |
| if (stat & ICSR1_ROR) { |
| printk(KERN_DEBUG "pxa_ir: fir receive overrun\n"); |
| si->stats.rx_over_errors++; |
| } |
| } else { |
| si->dma_rx_buff[len++] = data; |
| } |
| /* If we hit the end of frame, there's no point in continuing. */ |
| if (stat & ICSR1_EOF) |
| break; |
| } while (ICSR0 & ICSR0_EIF); |
| |
| if (stat & ICSR1_EOF) { |
| /* end of frame. */ |
| struct sk_buff *skb; |
| |
| if (icsr0 & ICSR0_FRE) { |
| printk(KERN_ERR "pxa_ir: dropping erroneous frame\n"); |
| si->stats.rx_dropped++; |
| return; |
| } |
| |
| skb = alloc_skb(len+1,GFP_ATOMIC); |
| if (!skb) { |
| printk(KERN_ERR "pxa_ir: fir out of memory for receive skb\n"); |
| si->stats.rx_dropped++; |
| return; |
| } |
| |
| /* Align IP header to 20 bytes */ |
| skb_reserve(skb, 1); |
| skb_copy_to_linear_data(skb, si->dma_rx_buff, len); |
| skb_put(skb, len); |
| |
| /* Feed it to IrLAP */ |
| skb->dev = dev; |
| skb_reset_mac_header(skb); |
| skb->protocol = htons(ETH_P_IRDA); |
| netif_rx(skb); |
| |
| si->stats.rx_packets++; |
| si->stats.rx_bytes += len; |
| |
| dev->last_rx = jiffies; |
| } |
| } |
| |
| /* FIR interrupt handler */ |
| static irqreturn_t pxa_irda_fir_irq(int irq, void *dev_id) |
| { |
| struct net_device *dev = dev_id; |
| struct pxa_irda *si = netdev_priv(dev); |
| int icsr0, i = 64; |
| |
| /* stop RX DMA */ |
| DCSR(si->rxdma) &= ~DCSR_RUN; |
| si->last_oscr = OSCR; |
| icsr0 = ICSR0; |
| |
| if (icsr0 & (ICSR0_FRE | ICSR0_RAB)) { |
| if (icsr0 & ICSR0_FRE) { |
| printk(KERN_DEBUG "pxa_ir: fir receive frame error\n"); |
| si->stats.rx_frame_errors++; |
| } else { |
| printk(KERN_DEBUG "pxa_ir: fir receive abort\n"); |
| si->stats.rx_errors++; |
| } |
| ICSR0 = icsr0 & (ICSR0_FRE | ICSR0_RAB); |
| } |
| |
| if (icsr0 & ICSR0_EIF) { |
| /* An error in FIFO occured, or there is a end of frame */ |
| pxa_irda_fir_irq_eif(si, dev, icsr0); |
| } |
| |
| ICCR0 = 0; |
| pxa_irda_fir_dma_rx_start(si); |
| while ((ICSR1 & ICSR1_RNE) && i--) |
| (void)ICDR; |
| ICCR0 = ICCR0_ITR | ICCR0_RXE; |
| |
| if (i < 0) |
| printk(KERN_ERR "pxa_ir: cannot clear Rx FIFO!\n"); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* hard_xmit interface of irda device */ |
| static int pxa_irda_hard_xmit(struct sk_buff *skb, struct net_device *dev) |
| { |
| struct pxa_irda *si = netdev_priv(dev); |
| int speed = irda_get_next_speed(skb); |
| |
| /* |
| * Does this packet contain a request to change the interface |
| * speed? If so, remember it until we complete the transmission |
| * of this frame. |
| */ |
| if (speed != si->speed && speed != -1) |
| si->newspeed = speed; |
| |
| /* |
| * If this is an empty frame, we can bypass a lot. |
| */ |
| if (skb->len == 0) { |
| if (si->newspeed) { |
| si->newspeed = 0; |
| pxa_irda_set_speed(si, speed); |
| } |
| dev_kfree_skb(skb); |
| return 0; |
| } |
| |
| netif_stop_queue(dev); |
| |
| if (!IS_FIR(si)) { |
| si->tx_buff.data = si->tx_buff.head; |
| si->tx_buff.len = async_wrap_skb(skb, si->tx_buff.data, si->tx_buff.truesize); |
| |
| /* Disable STUART interrupts and switch to transmit mode. */ |
| STIER = 0; |
| STISR = IrSR_IR_TRANSMIT_ON | IrSR_XMODE_PULSE_1_6; |
| |
| /* enable STUART and transmit interrupts */ |
| STIER = IER_UUE | IER_TIE; |
| } else { |
| unsigned long mtt = irda_get_mtt(skb); |
| |
| si->dma_tx_buff_len = skb->len; |
| skb_copy_from_linear_data(skb, si->dma_tx_buff, skb->len); |
| |
| if (mtt) |
| while ((unsigned)(OSCR - si->last_oscr)/4 < mtt) |
| cpu_relax(); |
| |
| /* stop RX DMA, disable FICP */ |
| DCSR(si->rxdma) &= ~DCSR_RUN; |
| ICCR0 = 0; |
| |
| pxa_irda_fir_dma_tx_start(si); |
| ICCR0 = ICCR0_ITR | ICCR0_TXE; |
| } |
| |
| dev_kfree_skb(skb); |
| dev->trans_start = jiffies; |
| return 0; |
| } |
| |
| static int pxa_irda_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd) |
| { |
| struct if_irda_req *rq = (struct if_irda_req *)ifreq; |
| struct pxa_irda *si = netdev_priv(dev); |
| int ret; |
| |
| switch (cmd) { |
| case SIOCSBANDWIDTH: |
| ret = -EPERM; |
| if (capable(CAP_NET_ADMIN)) { |
| /* |
| * We are unable to set the speed if the |
| * device is not running. |
| */ |
| if (netif_running(dev)) { |
| ret = pxa_irda_set_speed(si, |
| rq->ifr_baudrate); |
| } else { |
| printk(KERN_INFO "pxa_ir: SIOCSBANDWIDTH: !netif_running\n"); |
| ret = 0; |
| } |
| } |
| break; |
| |
| case SIOCSMEDIABUSY: |
| ret = -EPERM; |
| if (capable(CAP_NET_ADMIN)) { |
| irda_device_set_media_busy(dev, TRUE); |
| ret = 0; |
| } |
| break; |
| |
| case SIOCGRECEIVING: |
| ret = 0; |
| rq->ifr_receiving = IS_FIR(si) ? 0 |
| : si->rx_buff.state != OUTSIDE_FRAME; |
| break; |
| |
| default: |
| ret = -EOPNOTSUPP; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static struct net_device_stats *pxa_irda_stats(struct net_device *dev) |
| { |
| struct pxa_irda *si = netdev_priv(dev); |
| return &si->stats; |
| } |
| |
| static void pxa_irda_startup(struct pxa_irda *si) |
| { |
| /* Disable STUART interrupts */ |
| STIER = 0; |
| /* enable STUART interrupt to the processor */ |
| STMCR = MCR_OUT2; |
| /* configure SIR frame format: StartBit - Data 7 ... Data 0 - Stop Bit */ |
| STLCR = LCR_WLS0 | LCR_WLS1; |
| /* enable FIFO, we use FIFO to improve performance */ |
| STFCR = FCR_TRFIFOE | FCR_ITL_32; |
| |
| /* disable FICP */ |
| ICCR0 = 0; |
| /* configure FICP ICCR2 */ |
| ICCR2 = ICCR2_TXP | ICCR2_TRIG_32; |
| |
| /* configure DMAC */ |
| DRCMR(17) = si->rxdma | DRCMR_MAPVLD; |
| DRCMR(18) = si->txdma | DRCMR_MAPVLD; |
| |
| /* force SIR reinitialization */ |
| si->speed = 4000000; |
| pxa_irda_set_speed(si, 9600); |
| |
| printk(KERN_DEBUG "pxa_ir: irda startup\n"); |
| } |
| |
| static void pxa_irda_shutdown(struct pxa_irda *si) |
| { |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| |
| /* disable STUART and interrupt */ |
| STIER = 0; |
| /* disable STUART SIR mode */ |
| STISR = 0; |
| |
| /* disable DMA */ |
| DCSR(si->txdma) &= ~DCSR_RUN; |
| DCSR(si->rxdma) &= ~DCSR_RUN; |
| /* disable FICP */ |
| ICCR0 = 0; |
| |
| /* disable the STUART or FICP clocks */ |
| pxa_irda_disable_clk(si); |
| |
| DRCMR(17) = 0; |
| DRCMR(18) = 0; |
| |
| local_irq_restore(flags); |
| |
| /* power off board transceiver */ |
| si->pdata->transceiver_mode(si->dev, IR_OFF); |
| |
| printk(KERN_DEBUG "pxa_ir: irda shutdown\n"); |
| } |
| |
| static int pxa_irda_start(struct net_device *dev) |
| { |
| struct pxa_irda *si = netdev_priv(dev); |
| int err; |
| |
| si->speed = 9600; |
| |
| err = request_irq(IRQ_STUART, pxa_irda_sir_irq, 0, dev->name, dev); |
| if (err) |
| goto err_irq1; |
| |
| err = request_irq(IRQ_ICP, pxa_irda_fir_irq, 0, dev->name, dev); |
| if (err) |
| goto err_irq2; |
| |
| /* |
| * The interrupt must remain disabled for now. |
| */ |
| disable_irq(IRQ_STUART); |
| disable_irq(IRQ_ICP); |
| |
| err = -EBUSY; |
| si->rxdma = pxa_request_dma("FICP_RX",DMA_PRIO_LOW, pxa_irda_fir_dma_rx_irq, dev); |
| if (si->rxdma < 0) |
| goto err_rx_dma; |
| |
| si->txdma = pxa_request_dma("FICP_TX",DMA_PRIO_LOW, pxa_irda_fir_dma_tx_irq, dev); |
| if (si->txdma < 0) |
| goto err_tx_dma; |
| |
| err = -ENOMEM; |
| si->dma_rx_buff = dma_alloc_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT, |
| &si->dma_rx_buff_phy, GFP_KERNEL ); |
| if (!si->dma_rx_buff) |
| goto err_dma_rx_buff; |
| |
| si->dma_tx_buff = dma_alloc_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT, |
| &si->dma_tx_buff_phy, GFP_KERNEL ); |
| if (!si->dma_tx_buff) |
| goto err_dma_tx_buff; |
| |
| /* Setup the serial port for the initial speed. */ |
| pxa_irda_startup(si); |
| |
| /* |
| * Open a new IrLAP layer instance. |
| */ |
| si->irlap = irlap_open(dev, &si->qos, "pxa"); |
| err = -ENOMEM; |
| if (!si->irlap) |
| goto err_irlap; |
| |
| /* |
| * Now enable the interrupt and start the queue |
| */ |
| enable_irq(IRQ_STUART); |
| enable_irq(IRQ_ICP); |
| netif_start_queue(dev); |
| |
| printk(KERN_DEBUG "pxa_ir: irda driver opened\n"); |
| |
| return 0; |
| |
| err_irlap: |
| pxa_irda_shutdown(si); |
| dma_free_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT, si->dma_tx_buff, si->dma_tx_buff_phy); |
| err_dma_tx_buff: |
| dma_free_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT, si->dma_rx_buff, si->dma_rx_buff_phy); |
| err_dma_rx_buff: |
| pxa_free_dma(si->txdma); |
| err_tx_dma: |
| pxa_free_dma(si->rxdma); |
| err_rx_dma: |
| free_irq(IRQ_ICP, dev); |
| err_irq2: |
| free_irq(IRQ_STUART, dev); |
| err_irq1: |
| |
| return err; |
| } |
| |
| static int pxa_irda_stop(struct net_device *dev) |
| { |
| struct pxa_irda *si = netdev_priv(dev); |
| |
| netif_stop_queue(dev); |
| |
| pxa_irda_shutdown(si); |
| |
| /* Stop IrLAP */ |
| if (si->irlap) { |
| irlap_close(si->irlap); |
| si->irlap = NULL; |
| } |
| |
| free_irq(IRQ_STUART, dev); |
| free_irq(IRQ_ICP, dev); |
| |
| pxa_free_dma(si->rxdma); |
| pxa_free_dma(si->txdma); |
| |
| if (si->dma_rx_buff) |
| dma_free_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT, si->dma_tx_buff, si->dma_tx_buff_phy); |
| if (si->dma_tx_buff) |
| dma_free_coherent(si->dev, IRDA_FRAME_SIZE_LIMIT, si->dma_rx_buff, si->dma_rx_buff_phy); |
| |
| printk(KERN_DEBUG "pxa_ir: irda driver closed\n"); |
| return 0; |
| } |
| |
| static int pxa_irda_suspend(struct platform_device *_dev, pm_message_t state) |
| { |
| struct net_device *dev = platform_get_drvdata(_dev); |
| struct pxa_irda *si; |
| |
| if (dev && netif_running(dev)) { |
| si = netdev_priv(dev); |
| netif_device_detach(dev); |
| pxa_irda_shutdown(si); |
| } |
| |
| return 0; |
| } |
| |
| static int pxa_irda_resume(struct platform_device *_dev) |
| { |
| struct net_device *dev = platform_get_drvdata(_dev); |
| struct pxa_irda *si; |
| |
| if (dev && netif_running(dev)) { |
| si = netdev_priv(dev); |
| pxa_irda_startup(si); |
| netif_device_attach(dev); |
| netif_wake_queue(dev); |
| } |
| |
| return 0; |
| } |
| |
| |
| static int pxa_irda_init_iobuf(iobuff_t *io, int size) |
| { |
| io->head = kmalloc(size, GFP_KERNEL | GFP_DMA); |
| if (io->head != NULL) { |
| io->truesize = size; |
| io->in_frame = FALSE; |
| io->state = OUTSIDE_FRAME; |
| io->data = io->head; |
| } |
| return io->head ? 0 : -ENOMEM; |
| } |
| |
| static int pxa_irda_probe(struct platform_device *pdev) |
| { |
| struct net_device *dev; |
| struct pxa_irda *si; |
| unsigned int baudrate_mask; |
| int err; |
| |
| if (!pdev->dev.platform_data) |
| return -ENODEV; |
| |
| err = request_mem_region(__PREG(STUART), 0x24, "IrDA") ? 0 : -EBUSY; |
| if (err) |
| goto err_mem_1; |
| |
| err = request_mem_region(__PREG(FICP), 0x1c, "IrDA") ? 0 : -EBUSY; |
| if (err) |
| goto err_mem_2; |
| |
| dev = alloc_irdadev(sizeof(struct pxa_irda)); |
| if (!dev) |
| goto err_mem_3; |
| |
| si = netdev_priv(dev); |
| si->dev = &pdev->dev; |
| si->pdata = pdev->dev.platform_data; |
| |
| si->sir_clk = clk_get(&pdev->dev, "UARTCLK"); |
| si->fir_clk = clk_get(&pdev->dev, "FICPCLK"); |
| if (IS_ERR(si->sir_clk) || IS_ERR(si->fir_clk)) { |
| err = PTR_ERR(IS_ERR(si->sir_clk) ? si->sir_clk : si->fir_clk); |
| goto err_mem_4; |
| } |
| |
| /* |
| * Initialise the SIR buffers |
| */ |
| err = pxa_irda_init_iobuf(&si->rx_buff, 14384); |
| if (err) |
| goto err_mem_4; |
| err = pxa_irda_init_iobuf(&si->tx_buff, 4000); |
| if (err) |
| goto err_mem_5; |
| |
| if (si->pdata->startup) |
| err = si->pdata->startup(si->dev); |
| if (err) |
| goto err_startup; |
| |
| dev->hard_start_xmit = pxa_irda_hard_xmit; |
| dev->open = pxa_irda_start; |
| dev->stop = pxa_irda_stop; |
| dev->do_ioctl = pxa_irda_ioctl; |
| dev->get_stats = pxa_irda_stats; |
| |
| irda_init_max_qos_capabilies(&si->qos); |
| |
| baudrate_mask = 0; |
| if (si->pdata->transceiver_cap & IR_SIRMODE) |
| baudrate_mask |= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200; |
| if (si->pdata->transceiver_cap & IR_FIRMODE) |
| baudrate_mask |= IR_4000000 << 8; |
| |
| si->qos.baud_rate.bits &= baudrate_mask; |
| si->qos.min_turn_time.bits = 7; /* 1ms or more */ |
| |
| irda_qos_bits_to_value(&si->qos); |
| |
| err = register_netdev(dev); |
| |
| if (err == 0) |
| dev_set_drvdata(&pdev->dev, dev); |
| |
| if (err) { |
| if (si->pdata->shutdown) |
| si->pdata->shutdown(si->dev); |
| err_startup: |
| kfree(si->tx_buff.head); |
| err_mem_5: |
| kfree(si->rx_buff.head); |
| err_mem_4: |
| if (si->sir_clk && !IS_ERR(si->sir_clk)) |
| clk_put(si->sir_clk); |
| if (si->fir_clk && !IS_ERR(si->fir_clk)) |
| clk_put(si->fir_clk); |
| free_netdev(dev); |
| err_mem_3: |
| release_mem_region(__PREG(FICP), 0x1c); |
| err_mem_2: |
| release_mem_region(__PREG(STUART), 0x24); |
| } |
| err_mem_1: |
| return err; |
| } |
| |
| static int pxa_irda_remove(struct platform_device *_dev) |
| { |
| struct net_device *dev = platform_get_drvdata(_dev); |
| |
| if (dev) { |
| struct pxa_irda *si = netdev_priv(dev); |
| unregister_netdev(dev); |
| if (si->pdata->shutdown) |
| si->pdata->shutdown(si->dev); |
| kfree(si->tx_buff.head); |
| kfree(si->rx_buff.head); |
| clk_put(si->fir_clk); |
| clk_put(si->sir_clk); |
| free_netdev(dev); |
| } |
| |
| release_mem_region(__PREG(STUART), 0x24); |
| release_mem_region(__PREG(FICP), 0x1c); |
| |
| return 0; |
| } |
| |
| static struct platform_driver pxa_ir_driver = { |
| .driver = { |
| .name = "pxa2xx-ir", |
| .owner = THIS_MODULE, |
| }, |
| .probe = pxa_irda_probe, |
| .remove = pxa_irda_remove, |
| .suspend = pxa_irda_suspend, |
| .resume = pxa_irda_resume, |
| }; |
| |
| static int __init pxa_irda_init(void) |
| { |
| return platform_driver_register(&pxa_ir_driver); |
| } |
| |
| static void __exit pxa_irda_exit(void) |
| { |
| platform_driver_unregister(&pxa_ir_driver); |
| } |
| |
| module_init(pxa_irda_init); |
| module_exit(pxa_irda_exit); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:pxa2xx-ir"); |