| .. SPDX-License-Identifier: GPL-2.0 |
| |
| Kernel driver max16601 |
| ====================== |
| |
| Supported chips: |
| |
| * Maxim MAX16508 |
| |
| Prefix: 'max16508' |
| |
| Addresses scanned: - |
| |
| Datasheet: Not published |
| |
| * Maxim MAX16601 |
| |
| Prefix: 'max16601' |
| |
| Addresses scanned: - |
| |
| Datasheet: Not published |
| |
| Author: Guenter Roeck <linux@roeck-us.net> |
| |
| |
| Description |
| ----------- |
| |
| This driver supports the MAX16508 VR13 Dual-Output Voltage Regulator |
| as well as the MAX16601 VR13.HC Dual-Output Voltage Regulator chipsets. |
| |
| The driver is a client driver to the core PMBus driver. |
| Please see Documentation/hwmon/pmbus.rst for details on PMBus client drivers. |
| |
| |
| Usage Notes |
| ----------- |
| |
| This driver does not auto-detect devices. You will have to instantiate the |
| devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for |
| details. |
| |
| |
| Platform data support |
| --------------------- |
| |
| The driver supports standard PMBus driver platform data. |
| |
| |
| Sysfs entries |
| ------------- |
| |
| The following attributes are supported. |
| |
| =============================== =============================================== |
| in1_label "vin1" |
| in1_input VCORE input voltage. |
| in1_alarm Input voltage alarm. |
| |
| in2_label "vout1" |
| in2_input VCORE output voltage. |
| in2_alarm Output voltage alarm. |
| |
| curr1_label "iin1" |
| curr1_input VCORE input current, derived from duty cycle |
| and output current. |
| curr1_max Maximum input current. |
| curr1_max_alarm Current high alarm. |
| |
| curr[P+2]_label "iin1.P" |
| curr[P+2]_input VCORE phase P input current. |
| |
| curr[N+2]_label "iin2" |
| curr[N+2]_input VCORE input current, derived from sensor |
| element. |
| 'N' is the number of enabled/populated phases. |
| |
| curr[N+3]_label "iin3" |
| curr[N+3]_input VSA input current. |
| |
| curr[N+4]_label "iout1" |
| curr[N+4]_input VCORE output current. |
| curr[N+4]_crit Critical output current. |
| curr[N+4]_crit_alarm Output current critical alarm. |
| curr[N+4]_max Maximum output current. |
| curr[N+4]_max_alarm Output current high alarm. |
| |
| curr[N+P+5]_label "iout1.P" |
| curr[N+P+5]_input VCORE phase P output current. |
| |
| curr[2*N+5]_label "iout3" |
| curr[2*N+5]_input VSA output current. |
| curr[2*N+5]_highest Historical maximum VSA output current. |
| curr[2*N+5]_reset_history Write any value to reset curr21_highest. |
| curr[2*N+5]_crit Critical output current. |
| curr[2*N+5]_crit_alarm Output current critical alarm. |
| curr[2*N+5]_max Maximum output current. |
| curr[2*N+5]_max_alarm Output current high alarm. |
| |
| power1_label "pin1" |
| power1_input Input power, derived from duty cycle and output |
| current. |
| power1_alarm Input power alarm. |
| |
| power2_label "pin2" |
| power2_input Input power, derived from input current sensor. |
| |
| power3_label "pout" |
| power3_input Output power. |
| |
| temp1_input VCORE temperature. |
| temp1_crit Critical high temperature. |
| temp1_crit_alarm Chip temperature critical high alarm. |
| temp1_max Maximum temperature. |
| temp1_max_alarm Chip temperature high alarm. |
| |
| temp2_input TSENSE_0 temperature |
| temp3_input TSENSE_1 temperature |
| temp4_input TSENSE_2 temperature |
| temp5_input TSENSE_3 temperature |
| |
| temp6_input VSA temperature. |
| temp6_crit Critical high temperature. |
| temp6_crit_alarm Chip temperature critical high alarm. |
| temp6_max Maximum temperature. |
| temp6_max_alarm Chip temperature high alarm. |
| =============================== =============================================== |
