| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (c) 2015, The Linux Foundation. All rights reserved. |
| */ |
| |
| #include <linux/clk-provider.h> |
| #include <linux/platform_device.h> |
| #include <dt-bindings/phy/phy.h> |
| |
| #include "dsi_phy.h" |
| |
| #define S_DIV_ROUND_UP(n, d) \ |
| (((n) >= 0) ? (((n) + (d) - 1) / (d)) : (((n) - (d) + 1) / (d))) |
| |
| static inline s32 linear_inter(s32 tmax, s32 tmin, s32 percent, |
| s32 min_result, bool even) |
| { |
| s32 v; |
| |
| v = (tmax - tmin) * percent; |
| v = S_DIV_ROUND_UP(v, 100) + tmin; |
| if (even && (v & 0x1)) |
| return max_t(s32, min_result, v - 1); |
| else |
| return max_t(s32, min_result, v); |
| } |
| |
| static void dsi_dphy_timing_calc_clk_zero(struct msm_dsi_dphy_timing *timing, |
| s32 ui, s32 coeff, s32 pcnt) |
| { |
| s32 tmax, tmin, clk_z; |
| s32 temp; |
| |
| /* reset */ |
| temp = 300 * coeff - ((timing->clk_prepare >> 1) + 1) * 2 * ui; |
| tmin = S_DIV_ROUND_UP(temp, ui) - 2; |
| if (tmin > 255) { |
| tmax = 511; |
| clk_z = linear_inter(2 * tmin, tmin, pcnt, 0, true); |
| } else { |
| tmax = 255; |
| clk_z = linear_inter(tmax, tmin, pcnt, 0, true); |
| } |
| |
| /* adjust */ |
| temp = (timing->hs_rqst + timing->clk_prepare + clk_z) & 0x7; |
| timing->clk_zero = clk_z + 8 - temp; |
| } |
| |
| int msm_dsi_dphy_timing_calc(struct msm_dsi_dphy_timing *timing, |
| struct msm_dsi_phy_clk_request *clk_req) |
| { |
| const unsigned long bit_rate = clk_req->bitclk_rate; |
| const unsigned long esc_rate = clk_req->escclk_rate; |
| s32 ui, lpx; |
| s32 tmax, tmin; |
| s32 pcnt0 = 10; |
| s32 pcnt1 = (bit_rate > 1200000000) ? 15 : 10; |
| s32 pcnt2 = 10; |
| s32 pcnt3 = (bit_rate > 180000000) ? 10 : 40; |
| s32 coeff = 1000; /* Precision, should avoid overflow */ |
| s32 temp; |
| |
| if (!bit_rate || !esc_rate) |
| return -EINVAL; |
| |
| ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000); |
| lpx = mult_frac(NSEC_PER_MSEC, coeff, esc_rate / 1000); |
| |
| tmax = S_DIV_ROUND_UP(95 * coeff, ui) - 2; |
| tmin = S_DIV_ROUND_UP(38 * coeff, ui) - 2; |
| timing->clk_prepare = linear_inter(tmax, tmin, pcnt0, 0, true); |
| |
| temp = lpx / ui; |
| if (temp & 0x1) |
| timing->hs_rqst = temp; |
| else |
| timing->hs_rqst = max_t(s32, 0, temp - 2); |
| |
| /* Calculate clk_zero after clk_prepare and hs_rqst */ |
| dsi_dphy_timing_calc_clk_zero(timing, ui, coeff, pcnt2); |
| |
| temp = 105 * coeff + 12 * ui - 20 * coeff; |
| tmax = S_DIV_ROUND_UP(temp, ui) - 2; |
| tmin = S_DIV_ROUND_UP(60 * coeff, ui) - 2; |
| timing->clk_trail = linear_inter(tmax, tmin, pcnt3, 0, true); |
| |
| temp = 85 * coeff + 6 * ui; |
| tmax = S_DIV_ROUND_UP(temp, ui) - 2; |
| temp = 40 * coeff + 4 * ui; |
| tmin = S_DIV_ROUND_UP(temp, ui) - 2; |
| timing->hs_prepare = linear_inter(tmax, tmin, pcnt1, 0, true); |
| |
| tmax = 255; |
| temp = ((timing->hs_prepare >> 1) + 1) * 2 * ui + 2 * ui; |
| temp = 145 * coeff + 10 * ui - temp; |
| tmin = S_DIV_ROUND_UP(temp, ui) - 2; |
| timing->hs_zero = linear_inter(tmax, tmin, pcnt2, 24, true); |
| |
| temp = 105 * coeff + 12 * ui - 20 * coeff; |
| tmax = S_DIV_ROUND_UP(temp, ui) - 2; |
| temp = 60 * coeff + 4 * ui; |
| tmin = DIV_ROUND_UP(temp, ui) - 2; |
| timing->hs_trail = linear_inter(tmax, tmin, pcnt3, 0, true); |
| |
| tmax = 255; |
| tmin = S_DIV_ROUND_UP(100 * coeff, ui) - 2; |
| timing->hs_exit = linear_inter(tmax, tmin, pcnt2, 0, true); |
| |
| tmax = 63; |
| temp = ((timing->hs_exit >> 1) + 1) * 2 * ui; |
| temp = 60 * coeff + 52 * ui - 24 * ui - temp; |
| tmin = S_DIV_ROUND_UP(temp, 8 * ui) - 1; |
| timing->shared_timings.clk_post = linear_inter(tmax, tmin, pcnt2, 0, |
| false); |
| tmax = 63; |
| temp = ((timing->clk_prepare >> 1) + 1) * 2 * ui; |
| temp += ((timing->clk_zero >> 1) + 1) * 2 * ui; |
| temp += 8 * ui + lpx; |
| tmin = S_DIV_ROUND_UP(temp, 8 * ui) - 1; |
| if (tmin > tmax) { |
| temp = linear_inter(2 * tmax, tmin, pcnt2, 0, false); |
| timing->shared_timings.clk_pre = temp >> 1; |
| timing->shared_timings.clk_pre_inc_by_2 = true; |
| } else { |
| timing->shared_timings.clk_pre = |
| linear_inter(tmax, tmin, pcnt2, 0, false); |
| timing->shared_timings.clk_pre_inc_by_2 = false; |
| } |
| |
| timing->ta_go = 3; |
| timing->ta_sure = 0; |
| timing->ta_get = 4; |
| |
| DBG("PHY timings: %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d", |
| timing->shared_timings.clk_pre, timing->shared_timings.clk_post, |
| timing->shared_timings.clk_pre_inc_by_2, timing->clk_zero, |
| timing->clk_trail, timing->clk_prepare, timing->hs_exit, |
| timing->hs_zero, timing->hs_prepare, timing->hs_trail, |
| timing->hs_rqst); |
| |
| return 0; |
| } |
| |
| int msm_dsi_dphy_timing_calc_v2(struct msm_dsi_dphy_timing *timing, |
| struct msm_dsi_phy_clk_request *clk_req) |
| { |
| const unsigned long bit_rate = clk_req->bitclk_rate; |
| const unsigned long esc_rate = clk_req->escclk_rate; |
| s32 ui, ui_x8; |
| s32 tmax, tmin; |
| s32 pcnt0 = 50; |
| s32 pcnt1 = 50; |
| s32 pcnt2 = 10; |
| s32 pcnt3 = 30; |
| s32 pcnt4 = 10; |
| s32 pcnt5 = 2; |
| s32 coeff = 1000; /* Precision, should avoid overflow */ |
| s32 hb_en, hb_en_ckln, pd_ckln, pd; |
| s32 val, val_ckln; |
| s32 temp; |
| |
| if (!bit_rate || !esc_rate) |
| return -EINVAL; |
| |
| timing->hs_halfbyte_en = 0; |
| hb_en = 0; |
| timing->hs_halfbyte_en_ckln = 0; |
| hb_en_ckln = 0; |
| timing->hs_prep_dly_ckln = (bit_rate > 100000000) ? 0 : 3; |
| pd_ckln = timing->hs_prep_dly_ckln; |
| timing->hs_prep_dly = (bit_rate > 120000000) ? 0 : 1; |
| pd = timing->hs_prep_dly; |
| |
| val = (hb_en << 2) + (pd << 1); |
| val_ckln = (hb_en_ckln << 2) + (pd_ckln << 1); |
| |
| ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000); |
| ui_x8 = ui << 3; |
| |
| temp = S_DIV_ROUND_UP(38 * coeff - val_ckln * ui, ui_x8); |
| tmin = max_t(s32, temp, 0); |
| temp = (95 * coeff - val_ckln * ui) / ui_x8; |
| tmax = max_t(s32, temp, 0); |
| timing->clk_prepare = linear_inter(tmax, tmin, pcnt0, 0, false); |
| |
| temp = 300 * coeff - ((timing->clk_prepare << 3) + val_ckln) * ui; |
| tmin = S_DIV_ROUND_UP(temp - 11 * ui, ui_x8) - 3; |
| tmax = (tmin > 255) ? 511 : 255; |
| timing->clk_zero = linear_inter(tmax, tmin, pcnt5, 0, false); |
| |
| tmin = DIV_ROUND_UP(60 * coeff + 3 * ui, ui_x8); |
| temp = 105 * coeff + 12 * ui - 20 * coeff; |
| tmax = (temp + 3 * ui) / ui_x8; |
| timing->clk_trail = linear_inter(tmax, tmin, pcnt3, 0, false); |
| |
| temp = S_DIV_ROUND_UP(40 * coeff + 4 * ui - val * ui, ui_x8); |
| tmin = max_t(s32, temp, 0); |
| temp = (85 * coeff + 6 * ui - val * ui) / ui_x8; |
| tmax = max_t(s32, temp, 0); |
| timing->hs_prepare = linear_inter(tmax, tmin, pcnt1, 0, false); |
| |
| temp = 145 * coeff + 10 * ui - ((timing->hs_prepare << 3) + val) * ui; |
| tmin = S_DIV_ROUND_UP(temp - 11 * ui, ui_x8) - 3; |
| tmax = 255; |
| timing->hs_zero = linear_inter(tmax, tmin, pcnt4, 0, false); |
| |
| tmin = DIV_ROUND_UP(60 * coeff + 4 * ui + 3 * ui, ui_x8); |
| temp = 105 * coeff + 12 * ui - 20 * coeff; |
| tmax = (temp + 3 * ui) / ui_x8; |
| timing->hs_trail = linear_inter(tmax, tmin, pcnt3, 0, false); |
| |
| temp = 50 * coeff + ((hb_en << 2) - 8) * ui; |
| timing->hs_rqst = S_DIV_ROUND_UP(temp, ui_x8); |
| |
| tmin = DIV_ROUND_UP(100 * coeff, ui_x8) - 1; |
| tmax = 255; |
| timing->hs_exit = linear_inter(tmax, tmin, pcnt2, 0, false); |
| |
| temp = 50 * coeff + ((hb_en_ckln << 2) - 8) * ui; |
| timing->hs_rqst_ckln = S_DIV_ROUND_UP(temp, ui_x8); |
| |
| temp = 60 * coeff + 52 * ui - 43 * ui; |
| tmin = DIV_ROUND_UP(temp, ui_x8) - 1; |
| tmax = 63; |
| timing->shared_timings.clk_post = |
| linear_inter(tmax, tmin, pcnt2, 0, false); |
| |
| temp = 8 * ui + ((timing->clk_prepare << 3) + val_ckln) * ui; |
| temp += (((timing->clk_zero + 3) << 3) + 11 - (pd_ckln << 1)) * ui; |
| temp += hb_en_ckln ? (((timing->hs_rqst_ckln << 3) + 4) * ui) : |
| (((timing->hs_rqst_ckln << 3) + 8) * ui); |
| tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1; |
| tmax = 63; |
| if (tmin > tmax) { |
| temp = linear_inter(tmax << 1, tmin, pcnt2, 0, false); |
| timing->shared_timings.clk_pre = temp >> 1; |
| timing->shared_timings.clk_pre_inc_by_2 = 1; |
| } else { |
| timing->shared_timings.clk_pre = |
| linear_inter(tmax, tmin, pcnt2, 0, false); |
| timing->shared_timings.clk_pre_inc_by_2 = 0; |
| } |
| |
| timing->ta_go = 3; |
| timing->ta_sure = 0; |
| timing->ta_get = 4; |
| |
| DBG("%d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d", |
| timing->shared_timings.clk_pre, timing->shared_timings.clk_post, |
| timing->shared_timings.clk_pre_inc_by_2, timing->clk_zero, |
| timing->clk_trail, timing->clk_prepare, timing->hs_exit, |
| timing->hs_zero, timing->hs_prepare, timing->hs_trail, |
| timing->hs_rqst, timing->hs_rqst_ckln, timing->hs_halfbyte_en, |
| timing->hs_halfbyte_en_ckln, timing->hs_prep_dly, |
| timing->hs_prep_dly_ckln); |
| |
| return 0; |
| } |
| |
| int msm_dsi_dphy_timing_calc_v3(struct msm_dsi_dphy_timing *timing, |
| struct msm_dsi_phy_clk_request *clk_req) |
| { |
| const unsigned long bit_rate = clk_req->bitclk_rate; |
| const unsigned long esc_rate = clk_req->escclk_rate; |
| s32 ui, ui_x8; |
| s32 tmax, tmin; |
| s32 pcnt0 = 50; |
| s32 pcnt1 = 50; |
| s32 pcnt2 = 10; |
| s32 pcnt3 = 30; |
| s32 pcnt4 = 10; |
| s32 pcnt5 = 2; |
| s32 coeff = 1000; /* Precision, should avoid overflow */ |
| s32 hb_en, hb_en_ckln; |
| s32 temp; |
| |
| if (!bit_rate || !esc_rate) |
| return -EINVAL; |
| |
| timing->hs_halfbyte_en = 0; |
| hb_en = 0; |
| timing->hs_halfbyte_en_ckln = 0; |
| hb_en_ckln = 0; |
| |
| ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000); |
| ui_x8 = ui << 3; |
| |
| temp = S_DIV_ROUND_UP(38 * coeff, ui_x8); |
| tmin = max_t(s32, temp, 0); |
| temp = (95 * coeff) / ui_x8; |
| tmax = max_t(s32, temp, 0); |
| timing->clk_prepare = linear_inter(tmax, tmin, pcnt0, 0, false); |
| |
| temp = 300 * coeff - (timing->clk_prepare << 3) * ui; |
| tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1; |
| tmax = (tmin > 255) ? 511 : 255; |
| timing->clk_zero = linear_inter(tmax, tmin, pcnt5, 0, false); |
| |
| tmin = DIV_ROUND_UP(60 * coeff + 3 * ui, ui_x8); |
| temp = 105 * coeff + 12 * ui - 20 * coeff; |
| tmax = (temp + 3 * ui) / ui_x8; |
| timing->clk_trail = linear_inter(tmax, tmin, pcnt3, 0, false); |
| |
| temp = S_DIV_ROUND_UP(40 * coeff + 4 * ui, ui_x8); |
| tmin = max_t(s32, temp, 0); |
| temp = (85 * coeff + 6 * ui) / ui_x8; |
| tmax = max_t(s32, temp, 0); |
| timing->hs_prepare = linear_inter(tmax, tmin, pcnt1, 0, false); |
| |
| temp = 145 * coeff + 10 * ui - (timing->hs_prepare << 3) * ui; |
| tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1; |
| tmax = 255; |
| timing->hs_zero = linear_inter(tmax, tmin, pcnt4, 0, false); |
| |
| tmin = DIV_ROUND_UP(60 * coeff + 4 * ui, ui_x8) - 1; |
| temp = 105 * coeff + 12 * ui - 20 * coeff; |
| tmax = (temp / ui_x8) - 1; |
| timing->hs_trail = linear_inter(tmax, tmin, pcnt3, 0, false); |
| |
| temp = 50 * coeff + ((hb_en << 2) - 8) * ui; |
| timing->hs_rqst = S_DIV_ROUND_UP(temp, ui_x8); |
| |
| tmin = DIV_ROUND_UP(100 * coeff, ui_x8) - 1; |
| tmax = 255; |
| timing->hs_exit = linear_inter(tmax, tmin, pcnt2, 0, false); |
| |
| temp = 50 * coeff + ((hb_en_ckln << 2) - 8) * ui; |
| timing->hs_rqst_ckln = S_DIV_ROUND_UP(temp, ui_x8); |
| |
| temp = 60 * coeff + 52 * ui - 43 * ui; |
| tmin = DIV_ROUND_UP(temp, ui_x8) - 1; |
| tmax = 63; |
| timing->shared_timings.clk_post = |
| linear_inter(tmax, tmin, pcnt2, 0, false); |
| |
| temp = 8 * ui + (timing->clk_prepare << 3) * ui; |
| temp += (((timing->clk_zero + 3) << 3) + 11) * ui; |
| temp += hb_en_ckln ? (((timing->hs_rqst_ckln << 3) + 4) * ui) : |
| (((timing->hs_rqst_ckln << 3) + 8) * ui); |
| tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1; |
| tmax = 63; |
| if (tmin > tmax) { |
| temp = linear_inter(tmax << 1, tmin, pcnt2, 0, false); |
| timing->shared_timings.clk_pre = temp >> 1; |
| timing->shared_timings.clk_pre_inc_by_2 = 1; |
| } else { |
| timing->shared_timings.clk_pre = |
| linear_inter(tmax, tmin, pcnt2, 0, false); |
| timing->shared_timings.clk_pre_inc_by_2 = 0; |
| } |
| |
| timing->ta_go = 3; |
| timing->ta_sure = 0; |
| timing->ta_get = 4; |
| |
| DBG("%d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d", |
| timing->shared_timings.clk_pre, timing->shared_timings.clk_post, |
| timing->shared_timings.clk_pre_inc_by_2, timing->clk_zero, |
| timing->clk_trail, timing->clk_prepare, timing->hs_exit, |
| timing->hs_zero, timing->hs_prepare, timing->hs_trail, |
| timing->hs_rqst, timing->hs_rqst_ckln, timing->hs_halfbyte_en, |
| timing->hs_halfbyte_en_ckln, timing->hs_prep_dly, |
| timing->hs_prep_dly_ckln); |
| |
| return 0; |
| } |
| |
| int msm_dsi_dphy_timing_calc_v4(struct msm_dsi_dphy_timing *timing, |
| struct msm_dsi_phy_clk_request *clk_req) |
| { |
| const unsigned long bit_rate = clk_req->bitclk_rate; |
| const unsigned long esc_rate = clk_req->escclk_rate; |
| s32 ui, ui_x8; |
| s32 tmax, tmin; |
| s32 pcnt_clk_prep = 50; |
| s32 pcnt_clk_zero = 2; |
| s32 pcnt_clk_trail = 30; |
| s32 pcnt_hs_prep = 50; |
| s32 pcnt_hs_zero = 10; |
| s32 pcnt_hs_trail = 30; |
| s32 pcnt_hs_exit = 10; |
| s32 coeff = 1000; /* Precision, should avoid overflow */ |
| s32 hb_en; |
| s32 temp; |
| |
| if (!bit_rate || !esc_rate) |
| return -EINVAL; |
| |
| hb_en = 0; |
| |
| ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000); |
| ui_x8 = ui << 3; |
| |
| /* TODO: verify these calculations against latest downstream driver |
| * everything except clk_post/clk_pre uses calculations from v3 based |
| * on the downstream driver having the same calculations for v3 and v4 |
| */ |
| |
| temp = S_DIV_ROUND_UP(38 * coeff, ui_x8); |
| tmin = max_t(s32, temp, 0); |
| temp = (95 * coeff) / ui_x8; |
| tmax = max_t(s32, temp, 0); |
| timing->clk_prepare = linear_inter(tmax, tmin, pcnt_clk_prep, 0, false); |
| |
| temp = 300 * coeff - (timing->clk_prepare << 3) * ui; |
| tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1; |
| tmax = (tmin > 255) ? 511 : 255; |
| timing->clk_zero = linear_inter(tmax, tmin, pcnt_clk_zero, 0, false); |
| |
| tmin = DIV_ROUND_UP(60 * coeff + 3 * ui, ui_x8); |
| temp = 105 * coeff + 12 * ui - 20 * coeff; |
| tmax = (temp + 3 * ui) / ui_x8; |
| timing->clk_trail = linear_inter(tmax, tmin, pcnt_clk_trail, 0, false); |
| |
| temp = S_DIV_ROUND_UP(40 * coeff + 4 * ui, ui_x8); |
| tmin = max_t(s32, temp, 0); |
| temp = (85 * coeff + 6 * ui) / ui_x8; |
| tmax = max_t(s32, temp, 0); |
| timing->hs_prepare = linear_inter(tmax, tmin, pcnt_hs_prep, 0, false); |
| |
| temp = 145 * coeff + 10 * ui - (timing->hs_prepare << 3) * ui; |
| tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1; |
| tmax = 255; |
| timing->hs_zero = linear_inter(tmax, tmin, pcnt_hs_zero, 0, false); |
| |
| tmin = DIV_ROUND_UP(60 * coeff + 4 * ui, ui_x8) - 1; |
| temp = 105 * coeff + 12 * ui - 20 * coeff; |
| tmax = (temp / ui_x8) - 1; |
| timing->hs_trail = linear_inter(tmax, tmin, pcnt_hs_trail, 0, false); |
| |
| temp = 50 * coeff + ((hb_en << 2) - 8) * ui; |
| timing->hs_rqst = S_DIV_ROUND_UP(temp, ui_x8); |
| |
| tmin = DIV_ROUND_UP(100 * coeff, ui_x8) - 1; |
| tmax = 255; |
| timing->hs_exit = linear_inter(tmax, tmin, pcnt_hs_exit, 0, false); |
| |
| /* recommended min |
| * = roundup((mipi_min_ns + t_hs_trail_ns)/(16*bit_clk_ns), 0) - 1 |
| */ |
| temp = 60 * coeff + 52 * ui + + (timing->hs_trail + 1) * ui_x8; |
| tmin = DIV_ROUND_UP(temp, 16 * ui) - 1; |
| tmax = 255; |
| timing->shared_timings.clk_post = linear_inter(tmax, tmin, 5, 0, false); |
| |
| /* recommended min |
| * val1 = (tlpx_ns + clk_prepare_ns + clk_zero_ns + hs_rqst_ns) |
| * val2 = (16 * bit_clk_ns) |
| * final = roundup(val1/val2, 0) - 1 |
| */ |
| temp = 52 * coeff + (timing->clk_prepare + timing->clk_zero + 1) * ui_x8 + 54 * coeff; |
| tmin = DIV_ROUND_UP(temp, 16 * ui) - 1; |
| tmax = 255; |
| timing->shared_timings.clk_pre = DIV_ROUND_UP((tmax - tmin) * 125, 10000) + tmin; |
| |
| DBG("%d, %d, %d, %d, %d, %d, %d, %d, %d, %d", |
| timing->shared_timings.clk_pre, timing->shared_timings.clk_post, |
| timing->clk_zero, timing->clk_trail, timing->clk_prepare, timing->hs_exit, |
| timing->hs_zero, timing->hs_prepare, timing->hs_trail, timing->hs_rqst); |
| |
| return 0; |
| } |
| |
| int msm_dsi_cphy_timing_calc_v4(struct msm_dsi_dphy_timing *timing, |
| struct msm_dsi_phy_clk_request *clk_req) |
| { |
| const unsigned long bit_rate = clk_req->bitclk_rate; |
| const unsigned long esc_rate = clk_req->escclk_rate; |
| s32 ui, ui_x7; |
| s32 tmax, tmin; |
| s32 coeff = 1000; /* Precision, should avoid overflow */ |
| s32 temp; |
| |
| if (!bit_rate || !esc_rate) |
| return -EINVAL; |
| |
| ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000); |
| ui_x7 = ui * 7; |
| |
| temp = S_DIV_ROUND_UP(38 * coeff, ui_x7); |
| tmin = max_t(s32, temp, 0); |
| temp = (95 * coeff) / ui_x7; |
| tmax = max_t(s32, temp, 0); |
| timing->clk_prepare = linear_inter(tmax, tmin, 50, 0, false); |
| |
| tmin = DIV_ROUND_UP(50 * coeff, ui_x7); |
| tmax = 255; |
| timing->hs_rqst = linear_inter(tmax, tmin, 1, 0, false); |
| |
| tmin = DIV_ROUND_UP(100 * coeff, ui_x7) - 1; |
| tmax = 255; |
| timing->hs_exit = linear_inter(tmax, tmin, 10, 0, false); |
| |
| tmin = 1; |
| tmax = 32; |
| timing->shared_timings.clk_post = linear_inter(tmax, tmin, 80, 0, false); |
| |
| tmin = min_t(s32, 64, S_DIV_ROUND_UP(262 * coeff, ui_x7) - 1); |
| tmax = 64; |
| timing->shared_timings.clk_pre = linear_inter(tmax, tmin, 20, 0, false); |
| |
| DBG("%d, %d, %d, %d, %d", |
| timing->shared_timings.clk_pre, timing->shared_timings.clk_post, |
| timing->clk_prepare, timing->hs_exit, timing->hs_rqst); |
| |
| return 0; |
| } |
| |
| static int dsi_phy_regulator_init(struct msm_dsi_phy *phy) |
| { |
| struct regulator_bulk_data *s = phy->supplies; |
| const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs; |
| struct device *dev = &phy->pdev->dev; |
| int num = phy->cfg->reg_cfg.num; |
| int i, ret; |
| |
| for (i = 0; i < num; i++) |
| s[i].supply = regs[i].name; |
| |
| ret = devm_regulator_bulk_get(dev, num, s); |
| if (ret < 0) { |
| if (ret != -EPROBE_DEFER) { |
| DRM_DEV_ERROR(dev, |
| "%s: failed to init regulator, ret=%d\n", |
| __func__, ret); |
| } |
| |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void dsi_phy_regulator_disable(struct msm_dsi_phy *phy) |
| { |
| struct regulator_bulk_data *s = phy->supplies; |
| const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs; |
| int num = phy->cfg->reg_cfg.num; |
| int i; |
| |
| DBG(""); |
| for (i = num - 1; i >= 0; i--) |
| if (regs[i].disable_load >= 0) |
| regulator_set_load(s[i].consumer, regs[i].disable_load); |
| |
| regulator_bulk_disable(num, s); |
| } |
| |
| static int dsi_phy_regulator_enable(struct msm_dsi_phy *phy) |
| { |
| struct regulator_bulk_data *s = phy->supplies; |
| const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs; |
| struct device *dev = &phy->pdev->dev; |
| int num = phy->cfg->reg_cfg.num; |
| int ret, i; |
| |
| DBG(""); |
| for (i = 0; i < num; i++) { |
| if (regs[i].enable_load >= 0) { |
| ret = regulator_set_load(s[i].consumer, |
| regs[i].enable_load); |
| if (ret < 0) { |
| DRM_DEV_ERROR(dev, |
| "regulator %d set op mode failed, %d\n", |
| i, ret); |
| goto fail; |
| } |
| } |
| } |
| |
| ret = regulator_bulk_enable(num, s); |
| if (ret < 0) { |
| DRM_DEV_ERROR(dev, "regulator enable failed, %d\n", ret); |
| goto fail; |
| } |
| |
| return 0; |
| |
| fail: |
| for (i--; i >= 0; i--) |
| regulator_set_load(s[i].consumer, regs[i].disable_load); |
| return ret; |
| } |
| |
| static int dsi_phy_enable_resource(struct msm_dsi_phy *phy) |
| { |
| struct device *dev = &phy->pdev->dev; |
| int ret; |
| |
| pm_runtime_get_sync(dev); |
| |
| ret = clk_prepare_enable(phy->ahb_clk); |
| if (ret) { |
| DRM_DEV_ERROR(dev, "%s: can't enable ahb clk, %d\n", __func__, ret); |
| pm_runtime_put_sync(dev); |
| } |
| |
| return ret; |
| } |
| |
| static void dsi_phy_disable_resource(struct msm_dsi_phy *phy) |
| { |
| clk_disable_unprepare(phy->ahb_clk); |
| pm_runtime_put_autosuspend(&phy->pdev->dev); |
| } |
| |
| static const struct of_device_id dsi_phy_dt_match[] = { |
| #ifdef CONFIG_DRM_MSM_DSI_28NM_PHY |
| { .compatible = "qcom,dsi-phy-28nm-hpm", |
| .data = &dsi_phy_28nm_hpm_cfgs }, |
| { .compatible = "qcom,dsi-phy-28nm-hpm-fam-b", |
| .data = &dsi_phy_28nm_hpm_famb_cfgs }, |
| { .compatible = "qcom,dsi-phy-28nm-lp", |
| .data = &dsi_phy_28nm_lp_cfgs }, |
| #endif |
| #ifdef CONFIG_DRM_MSM_DSI_20NM_PHY |
| { .compatible = "qcom,dsi-phy-20nm", |
| .data = &dsi_phy_20nm_cfgs }, |
| #endif |
| #ifdef CONFIG_DRM_MSM_DSI_28NM_8960_PHY |
| { .compatible = "qcom,dsi-phy-28nm-8960", |
| .data = &dsi_phy_28nm_8960_cfgs }, |
| #endif |
| #ifdef CONFIG_DRM_MSM_DSI_14NM_PHY |
| { .compatible = "qcom,dsi-phy-14nm", |
| .data = &dsi_phy_14nm_cfgs }, |
| { .compatible = "qcom,dsi-phy-14nm-660", |
| .data = &dsi_phy_14nm_660_cfgs }, |
| { .compatible = "qcom,dsi-phy-14nm-8953", |
| .data = &dsi_phy_14nm_8953_cfgs }, |
| #endif |
| #ifdef CONFIG_DRM_MSM_DSI_10NM_PHY |
| { .compatible = "qcom,dsi-phy-10nm", |
| .data = &dsi_phy_10nm_cfgs }, |
| { .compatible = "qcom,dsi-phy-10nm-8998", |
| .data = &dsi_phy_10nm_8998_cfgs }, |
| #endif |
| #ifdef CONFIG_DRM_MSM_DSI_7NM_PHY |
| { .compatible = "qcom,dsi-phy-7nm", |
| .data = &dsi_phy_7nm_cfgs }, |
| { .compatible = "qcom,dsi-phy-7nm-8150", |
| .data = &dsi_phy_7nm_8150_cfgs }, |
| { .compatible = "qcom,sc7280-dsi-phy-7nm", |
| .data = &dsi_phy_7nm_7280_cfgs }, |
| #endif |
| {} |
| }; |
| |
| /* |
| * Currently, we only support one SoC for each PHY type. When we have multiple |
| * SoCs for the same PHY, we can try to make the index searching a bit more |
| * clever. |
| */ |
| static int dsi_phy_get_id(struct msm_dsi_phy *phy) |
| { |
| struct platform_device *pdev = phy->pdev; |
| const struct msm_dsi_phy_cfg *cfg = phy->cfg; |
| struct resource *res; |
| int i; |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dsi_phy"); |
| if (!res) |
| return -EINVAL; |
| |
| for (i = 0; i < cfg->num_dsi_phy; i++) { |
| if (cfg->io_start[i] == res->start) |
| return i; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int dsi_phy_driver_probe(struct platform_device *pdev) |
| { |
| struct msm_dsi_phy *phy; |
| struct device *dev = &pdev->dev; |
| u32 phy_type; |
| int ret; |
| |
| phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); |
| if (!phy) |
| return -ENOMEM; |
| |
| phy->provided_clocks = devm_kzalloc(dev, |
| struct_size(phy->provided_clocks, hws, NUM_PROVIDED_CLKS), |
| GFP_KERNEL); |
| if (!phy->provided_clocks) |
| return -ENOMEM; |
| |
| phy->provided_clocks->num = NUM_PROVIDED_CLKS; |
| |
| phy->cfg = of_device_get_match_data(&pdev->dev); |
| if (!phy->cfg) |
| return -ENODEV; |
| |
| phy->pdev = pdev; |
| |
| phy->id = dsi_phy_get_id(phy); |
| if (phy->id < 0) { |
| ret = phy->id; |
| DRM_DEV_ERROR(dev, "%s: couldn't identify PHY index, %d\n", |
| __func__, ret); |
| goto fail; |
| } |
| |
| phy->regulator_ldo_mode = of_property_read_bool(dev->of_node, |
| "qcom,dsi-phy-regulator-ldo-mode"); |
| if (!of_property_read_u32(dev->of_node, "phy-type", &phy_type)) |
| phy->cphy_mode = (phy_type == PHY_TYPE_CPHY); |
| |
| phy->base = msm_ioremap_size(pdev, "dsi_phy", "DSI_PHY", &phy->base_size); |
| if (IS_ERR(phy->base)) { |
| DRM_DEV_ERROR(dev, "%s: failed to map phy base\n", __func__); |
| ret = -ENOMEM; |
| goto fail; |
| } |
| |
| phy->pll_base = msm_ioremap_size(pdev, "dsi_pll", "DSI_PLL", &phy->pll_size); |
| if (IS_ERR(phy->pll_base)) { |
| DRM_DEV_ERROR(&pdev->dev, "%s: failed to map pll base\n", __func__); |
| ret = -ENOMEM; |
| goto fail; |
| } |
| |
| if (phy->cfg->has_phy_lane) { |
| phy->lane_base = msm_ioremap_size(pdev, "dsi_phy_lane", "DSI_PHY_LANE", &phy->lane_size); |
| if (IS_ERR(phy->lane_base)) { |
| DRM_DEV_ERROR(&pdev->dev, "%s: failed to map phy lane base\n", __func__); |
| ret = -ENOMEM; |
| goto fail; |
| } |
| } |
| |
| if (phy->cfg->has_phy_regulator) { |
| phy->reg_base = msm_ioremap_size(pdev, "dsi_phy_regulator", "DSI_PHY_REG", &phy->reg_size); |
| if (IS_ERR(phy->reg_base)) { |
| DRM_DEV_ERROR(&pdev->dev, "%s: failed to map phy regulator base\n", __func__); |
| ret = -ENOMEM; |
| goto fail; |
| } |
| } |
| |
| ret = dsi_phy_regulator_init(phy); |
| if (ret) |
| goto fail; |
| |
| phy->ahb_clk = msm_clk_get(pdev, "iface"); |
| if (IS_ERR(phy->ahb_clk)) { |
| DRM_DEV_ERROR(dev, "%s: Unable to get ahb clk\n", __func__); |
| ret = PTR_ERR(phy->ahb_clk); |
| goto fail; |
| } |
| |
| /* PLL init will call into clk_register which requires |
| * register access, so we need to enable power and ahb clock. |
| */ |
| ret = dsi_phy_enable_resource(phy); |
| if (ret) |
| goto fail; |
| |
| if (phy->cfg->ops.pll_init) { |
| ret = phy->cfg->ops.pll_init(phy); |
| if (ret) { |
| DRM_DEV_INFO(dev, |
| "%s: pll init failed: %d, need separate pll clk driver\n", |
| __func__, ret); |
| goto fail; |
| } |
| } |
| |
| ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, |
| phy->provided_clocks); |
| if (ret) { |
| DRM_DEV_ERROR(dev, "%s: failed to register clk provider: %d\n", __func__, ret); |
| goto fail; |
| } |
| |
| dsi_phy_disable_resource(phy); |
| |
| platform_set_drvdata(pdev, phy); |
| |
| return 0; |
| |
| fail: |
| return ret; |
| } |
| |
| static struct platform_driver dsi_phy_platform_driver = { |
| .probe = dsi_phy_driver_probe, |
| .driver = { |
| .name = "msm_dsi_phy", |
| .of_match_table = dsi_phy_dt_match, |
| }, |
| }; |
| |
| void __init msm_dsi_phy_driver_register(void) |
| { |
| platform_driver_register(&dsi_phy_platform_driver); |
| } |
| |
| void __exit msm_dsi_phy_driver_unregister(void) |
| { |
| platform_driver_unregister(&dsi_phy_platform_driver); |
| } |
| |
| int msm_dsi_phy_enable(struct msm_dsi_phy *phy, |
| struct msm_dsi_phy_clk_request *clk_req, |
| struct msm_dsi_phy_shared_timings *shared_timings) |
| { |
| struct device *dev = &phy->pdev->dev; |
| int ret; |
| |
| if (!phy || !phy->cfg->ops.enable) |
| return -EINVAL; |
| |
| ret = dsi_phy_enable_resource(phy); |
| if (ret) { |
| DRM_DEV_ERROR(dev, "%s: resource enable failed, %d\n", |
| __func__, ret); |
| goto res_en_fail; |
| } |
| |
| ret = dsi_phy_regulator_enable(phy); |
| if (ret) { |
| DRM_DEV_ERROR(dev, "%s: regulator enable failed, %d\n", |
| __func__, ret); |
| goto reg_en_fail; |
| } |
| |
| ret = phy->cfg->ops.enable(phy, clk_req); |
| if (ret) { |
| DRM_DEV_ERROR(dev, "%s: phy enable failed, %d\n", __func__, ret); |
| goto phy_en_fail; |
| } |
| |
| memcpy(shared_timings, &phy->timing.shared_timings, |
| sizeof(*shared_timings)); |
| |
| /* |
| * Resetting DSI PHY silently changes its PLL registers to reset status, |
| * which will confuse clock driver and result in wrong output rate of |
| * link clocks. Restore PLL status if its PLL is being used as clock |
| * source. |
| */ |
| if (phy->usecase != MSM_DSI_PHY_SLAVE) { |
| ret = msm_dsi_phy_pll_restore_state(phy); |
| if (ret) { |
| DRM_DEV_ERROR(dev, "%s: failed to restore phy state, %d\n", |
| __func__, ret); |
| goto pll_restor_fail; |
| } |
| } |
| |
| return 0; |
| |
| pll_restor_fail: |
| if (phy->cfg->ops.disable) |
| phy->cfg->ops.disable(phy); |
| phy_en_fail: |
| dsi_phy_regulator_disable(phy); |
| reg_en_fail: |
| dsi_phy_disable_resource(phy); |
| res_en_fail: |
| return ret; |
| } |
| |
| void msm_dsi_phy_disable(struct msm_dsi_phy *phy) |
| { |
| if (!phy || !phy->cfg->ops.disable) |
| return; |
| |
| phy->cfg->ops.disable(phy); |
| |
| dsi_phy_regulator_disable(phy); |
| dsi_phy_disable_resource(phy); |
| } |
| |
| void msm_dsi_phy_set_usecase(struct msm_dsi_phy *phy, |
| enum msm_dsi_phy_usecase uc) |
| { |
| if (phy) |
| phy->usecase = uc; |
| } |
| |
| /* Returns true if we have to clear DSI_LANE_CTRL.HS_REQ_SEL_PHY */ |
| bool msm_dsi_phy_set_continuous_clock(struct msm_dsi_phy *phy, bool enable) |
| { |
| if (!phy || !phy->cfg->ops.set_continuous_clock) |
| return false; |
| |
| return phy->cfg->ops.set_continuous_clock(phy, enable); |
| } |
| |
| int msm_dsi_phy_get_clk_provider(struct msm_dsi_phy *phy, |
| struct clk **byte_clk_provider, struct clk **pixel_clk_provider) |
| { |
| if (byte_clk_provider) |
| *byte_clk_provider = phy->provided_clocks->hws[DSI_BYTE_PLL_CLK]->clk; |
| if (pixel_clk_provider) |
| *pixel_clk_provider = phy->provided_clocks->hws[DSI_PIXEL_PLL_CLK]->clk; |
| |
| return 0; |
| } |
| |
| void msm_dsi_phy_pll_save_state(struct msm_dsi_phy *phy) |
| { |
| if (phy->cfg->ops.save_pll_state) { |
| phy->cfg->ops.save_pll_state(phy); |
| phy->state_saved = true; |
| } |
| } |
| |
| int msm_dsi_phy_pll_restore_state(struct msm_dsi_phy *phy) |
| { |
| int ret; |
| |
| if (phy->cfg->ops.restore_pll_state && phy->state_saved) { |
| ret = phy->cfg->ops.restore_pll_state(phy); |
| if (ret) |
| return ret; |
| |
| phy->state_saved = false; |
| } |
| |
| return 0; |
| } |
| |
| void msm_dsi_phy_snapshot(struct msm_disp_state *disp_state, struct msm_dsi_phy *phy) |
| { |
| msm_disp_snapshot_add_block(disp_state, |
| phy->base_size, phy->base, |
| "dsi%d_phy", phy->id); |
| |
| /* Do not try accessing PLL registers if it is switched off */ |
| if (phy->pll_on) |
| msm_disp_snapshot_add_block(disp_state, |
| phy->pll_size, phy->pll_base, |
| "dsi%d_pll", phy->id); |
| |
| if (phy->lane_base) |
| msm_disp_snapshot_add_block(disp_state, |
| phy->lane_size, phy->lane_base, |
| "dsi%d_lane", phy->id); |
| |
| if (phy->reg_base) |
| msm_disp_snapshot_add_block(disp_state, |
| phy->reg_size, phy->reg_base, |
| "dsi%d_reg", phy->id); |
| } |