| /* | 
 |  *   Copyright (c) 2011, 2012, Atheros Communications Inc. | 
 |  *   Copyright (c) 2014, I2SE GmbH | 
 |  * | 
 |  *   Permission to use, copy, modify, and/or distribute this software | 
 |  *   for any purpose with or without fee is hereby granted, provided | 
 |  *   that the above copyright notice and this permission notice appear | 
 |  *   in all copies. | 
 |  * | 
 |  *   THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL | 
 |  *   WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED | 
 |  *   WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL | 
 |  *   THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR | 
 |  *   CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM | 
 |  *   LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, | 
 |  *   NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN | 
 |  *   CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. | 
 |  */ | 
 |  | 
 | /*   Atheros Ethernet framing. Every Ethernet frame is surrounded by an atheros | 
 |  *   frame while transmitted over a serial channel. | 
 |  */ | 
 |  | 
 | #ifndef _QCA_FRAMING_H | 
 | #define _QCA_FRAMING_H | 
 |  | 
 | #include <linux/if_ether.h> | 
 | #include <linux/if_vlan.h> | 
 | #include <linux/types.h> | 
 |  | 
 | /* Frame is currently being received */ | 
 | #define QCAFRM_GATHER 0 | 
 |  | 
 | /*  No header byte while expecting it */ | 
 | #define QCAFRM_NOHEAD (QCAFRM_ERR_BASE - 1) | 
 |  | 
 | /* No tailer byte while expecting it */ | 
 | #define QCAFRM_NOTAIL (QCAFRM_ERR_BASE - 2) | 
 |  | 
 | /* Frame length is invalid */ | 
 | #define QCAFRM_INVLEN (QCAFRM_ERR_BASE - 3) | 
 |  | 
 | /* Frame length is invalid */ | 
 | #define QCAFRM_INVFRAME (QCAFRM_ERR_BASE - 4) | 
 |  | 
 | /* Min/Max Ethernet MTU: 46/1500 */ | 
 | #define QCAFRM_MIN_MTU (ETH_ZLEN - ETH_HLEN) | 
 | #define QCAFRM_MAX_MTU ETH_DATA_LEN | 
 |  | 
 | /* Min/Max frame lengths */ | 
 | #define QCAFRM_MIN_LEN (QCAFRM_MIN_MTU + ETH_HLEN) | 
 | #define QCAFRM_MAX_LEN (QCAFRM_MAX_MTU + VLAN_ETH_HLEN) | 
 |  | 
 | /* QCA7K header len */ | 
 | #define QCAFRM_HEADER_LEN 8 | 
 |  | 
 | /* QCA7K footer len */ | 
 | #define QCAFRM_FOOTER_LEN 2 | 
 |  | 
 | /* QCA7K Framing. */ | 
 | #define QCAFRM_ERR_BASE -1000 | 
 |  | 
 | enum qcafrm_state { | 
 | 	/* HW length is only available on SPI */ | 
 | 	QCAFRM_HW_LEN0 = 0x8000, | 
 | 	QCAFRM_HW_LEN1 = QCAFRM_HW_LEN0 - 1, | 
 | 	QCAFRM_HW_LEN2 = QCAFRM_HW_LEN1 - 1, | 
 | 	QCAFRM_HW_LEN3 = QCAFRM_HW_LEN2 - 1, | 
 |  | 
 | 	/*  Waiting first 0xAA of header */ | 
 | 	QCAFRM_WAIT_AA1 = QCAFRM_HW_LEN3 - 1, | 
 |  | 
 | 	/*  Waiting second 0xAA of header */ | 
 | 	QCAFRM_WAIT_AA2 = QCAFRM_WAIT_AA1 - 1, | 
 |  | 
 | 	/*  Waiting third 0xAA of header */ | 
 | 	QCAFRM_WAIT_AA3 = QCAFRM_WAIT_AA2 - 1, | 
 |  | 
 | 	/*  Waiting fourth 0xAA of header */ | 
 | 	QCAFRM_WAIT_AA4 = QCAFRM_WAIT_AA3 - 1, | 
 |  | 
 | 	/*  Waiting Byte 0-1 of length (litte endian) */ | 
 | 	QCAFRM_WAIT_LEN_BYTE0 = QCAFRM_WAIT_AA4 - 1, | 
 | 	QCAFRM_WAIT_LEN_BYTE1 = QCAFRM_WAIT_AA4 - 2, | 
 |  | 
 | 	/* Reserved bytes */ | 
 | 	QCAFRM_WAIT_RSVD_BYTE1 = QCAFRM_WAIT_AA4 - 3, | 
 | 	QCAFRM_WAIT_RSVD_BYTE2 = QCAFRM_WAIT_AA4 - 4, | 
 |  | 
 | 	/*  The frame length is used as the state until | 
 | 	 *  the end of the Ethernet frame | 
 | 	 *  Waiting for first 0x55 of footer | 
 | 	 */ | 
 | 	QCAFRM_WAIT_551 = 1, | 
 |  | 
 | 	/*  Waiting for second 0x55 of footer */ | 
 | 	QCAFRM_WAIT_552 = QCAFRM_WAIT_551 - 1 | 
 | }; | 
 |  | 
 | /*   Structure to maintain the frame decoding during reception. */ | 
 |  | 
 | struct qcafrm_handle { | 
 | 	/*  Current decoding state */ | 
 | 	enum qcafrm_state state; | 
 | 	/* Initial state depends on connection type */ | 
 | 	enum qcafrm_state init; | 
 |  | 
 | 	/* Offset in buffer (borrowed for length too) */ | 
 | 	u16 offset; | 
 |  | 
 | 	/* Frame length as kept by this module */ | 
 | 	u16 len; | 
 | }; | 
 |  | 
 | u16 qcafrm_create_header(u8 *buf, u16 len); | 
 |  | 
 | u16 qcafrm_create_footer(u8 *buf); | 
 |  | 
 | static inline void qcafrm_fsm_init_spi(struct qcafrm_handle *handle) | 
 | { | 
 | 	handle->init = QCAFRM_HW_LEN0; | 
 | 	handle->state = handle->init; | 
 | } | 
 |  | 
 | static inline void qcafrm_fsm_init_uart(struct qcafrm_handle *handle) | 
 | { | 
 | 	handle->init = QCAFRM_WAIT_AA1; | 
 | 	handle->state = handle->init; | 
 | } | 
 |  | 
 | /*   Gather received bytes and try to extract a full Ethernet frame | 
 |  *   by following a simple state machine. | 
 |  * | 
 |  * Return:   QCAFRM_GATHER       No Ethernet frame fully received yet. | 
 |  *           QCAFRM_NOHEAD       Header expected but not found. | 
 |  *           QCAFRM_INVLEN       QCA7K frame length is invalid | 
 |  *           QCAFRM_NOTAIL       Footer expected but not found. | 
 |  *           > 0                 Number of byte in the fully received | 
 |  *                               Ethernet frame | 
 |  */ | 
 |  | 
 | s32 qcafrm_fsm_decode(struct qcafrm_handle *handle, u8 *buf, u16 buf_len, u8 recv_byte); | 
 |  | 
 | #endif /* _QCA_FRAMING_H */ |