| // SPDX-License-Identifier: GPL-2.0-only |
| /* Copyright(c) 2022 Intel Corporation. All rights reserved. */ |
| #include <linux/memregion.h> |
| #include <linux/genalloc.h> |
| #include <linux/device.h> |
| #include <linux/module.h> |
| #include <linux/memory.h> |
| #include <linux/slab.h> |
| #include <linux/uuid.h> |
| #include <linux/sort.h> |
| #include <linux/idr.h> |
| #include <linux/memory-tiers.h> |
| #include <cxlmem.h> |
| #include <cxl.h> |
| #include "core.h" |
| |
| /** |
| * DOC: cxl core region |
| * |
| * CXL Regions represent mapped memory capacity in system physical address |
| * space. Whereas the CXL Root Decoders identify the bounds of potential CXL |
| * Memory ranges, Regions represent the active mapped capacity by the HDM |
| * Decoder Capability structures throughout the Host Bridges, Switches, and |
| * Endpoints in the topology. |
| * |
| * Region configuration has ordering constraints. UUID may be set at any time |
| * but is only visible for persistent regions. |
| * 1. Interleave granularity |
| * 2. Interleave size |
| * 3. Decoder targets |
| */ |
| |
| static struct cxl_region *to_cxl_region(struct device *dev); |
| |
| #define __ACCESS_ATTR_RO(_level, _name) { \ |
| .attr = { .name = __stringify(_name), .mode = 0444 }, \ |
| .show = _name##_access##_level##_show, \ |
| } |
| |
| #define ACCESS_DEVICE_ATTR_RO(level, name) \ |
| struct device_attribute dev_attr_access##level##_##name = __ACCESS_ATTR_RO(level, name) |
| |
| #define ACCESS_ATTR_RO(level, attrib) \ |
| static ssize_t attrib##_access##level##_show(struct device *dev, \ |
| struct device_attribute *attr, \ |
| char *buf) \ |
| { \ |
| struct cxl_region *cxlr = to_cxl_region(dev); \ |
| \ |
| if (cxlr->coord[level].attrib == 0) \ |
| return -ENOENT; \ |
| \ |
| return sysfs_emit(buf, "%u\n", cxlr->coord[level].attrib); \ |
| } \ |
| static ACCESS_DEVICE_ATTR_RO(level, attrib) |
| |
| ACCESS_ATTR_RO(0, read_bandwidth); |
| ACCESS_ATTR_RO(0, read_latency); |
| ACCESS_ATTR_RO(0, write_bandwidth); |
| ACCESS_ATTR_RO(0, write_latency); |
| |
| #define ACCESS_ATTR_DECLARE(level, attrib) \ |
| (&dev_attr_access##level##_##attrib.attr) |
| |
| static struct attribute *access0_coordinate_attrs[] = { |
| ACCESS_ATTR_DECLARE(0, read_bandwidth), |
| ACCESS_ATTR_DECLARE(0, write_bandwidth), |
| ACCESS_ATTR_DECLARE(0, read_latency), |
| ACCESS_ATTR_DECLARE(0, write_latency), |
| NULL |
| }; |
| |
| ACCESS_ATTR_RO(1, read_bandwidth); |
| ACCESS_ATTR_RO(1, read_latency); |
| ACCESS_ATTR_RO(1, write_bandwidth); |
| ACCESS_ATTR_RO(1, write_latency); |
| |
| static struct attribute *access1_coordinate_attrs[] = { |
| ACCESS_ATTR_DECLARE(1, read_bandwidth), |
| ACCESS_ATTR_DECLARE(1, write_bandwidth), |
| ACCESS_ATTR_DECLARE(1, read_latency), |
| ACCESS_ATTR_DECLARE(1, write_latency), |
| NULL |
| }; |
| |
| #define ACCESS_VISIBLE(level) \ |
| static umode_t cxl_region_access##level##_coordinate_visible( \ |
| struct kobject *kobj, struct attribute *a, int n) \ |
| { \ |
| struct device *dev = kobj_to_dev(kobj); \ |
| struct cxl_region *cxlr = to_cxl_region(dev); \ |
| \ |
| if (a == &dev_attr_access##level##_read_latency.attr && \ |
| cxlr->coord[level].read_latency == 0) \ |
| return 0; \ |
| \ |
| if (a == &dev_attr_access##level##_write_latency.attr && \ |
| cxlr->coord[level].write_latency == 0) \ |
| return 0; \ |
| \ |
| if (a == &dev_attr_access##level##_read_bandwidth.attr && \ |
| cxlr->coord[level].read_bandwidth == 0) \ |
| return 0; \ |
| \ |
| if (a == &dev_attr_access##level##_write_bandwidth.attr && \ |
| cxlr->coord[level].write_bandwidth == 0) \ |
| return 0; \ |
| \ |
| return a->mode; \ |
| } |
| |
| ACCESS_VISIBLE(0); |
| ACCESS_VISIBLE(1); |
| |
| static const struct attribute_group cxl_region_access0_coordinate_group = { |
| .name = "access0", |
| .attrs = access0_coordinate_attrs, |
| .is_visible = cxl_region_access0_coordinate_visible, |
| }; |
| |
| static const struct attribute_group *get_cxl_region_access0_group(void) |
| { |
| return &cxl_region_access0_coordinate_group; |
| } |
| |
| static const struct attribute_group cxl_region_access1_coordinate_group = { |
| .name = "access1", |
| .attrs = access1_coordinate_attrs, |
| .is_visible = cxl_region_access1_coordinate_visible, |
| }; |
| |
| static const struct attribute_group *get_cxl_region_access1_group(void) |
| { |
| return &cxl_region_access1_coordinate_group; |
| } |
| |
| static ssize_t uuid_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct cxl_region *cxlr = to_cxl_region(dev); |
| struct cxl_region_params *p = &cxlr->params; |
| ssize_t rc; |
| |
| rc = down_read_interruptible(&cxl_region_rwsem); |
| if (rc) |
| return rc; |
| if (cxlr->mode != CXL_DECODER_PMEM) |
| rc = sysfs_emit(buf, "\n"); |
| else |
| rc = sysfs_emit(buf, "%pUb\n", &p->uuid); |
| up_read(&cxl_region_rwsem); |
| |
| return rc; |
| } |
| |
| static int is_dup(struct device *match, void *data) |
| { |
| struct cxl_region_params *p; |
| struct cxl_region *cxlr; |
| uuid_t *uuid = data; |
| |
| if (!is_cxl_region(match)) |
| return 0; |
| |
| lockdep_assert_held(&cxl_region_rwsem); |
| cxlr = to_cxl_region(match); |
| p = &cxlr->params; |
| |
| if (uuid_equal(&p->uuid, uuid)) { |
| dev_dbg(match, "already has uuid: %pUb\n", uuid); |
| return -EBUSY; |
| } |
| |
| return 0; |
| } |
| |
| static ssize_t uuid_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t len) |
| { |
| struct cxl_region *cxlr = to_cxl_region(dev); |
| struct cxl_region_params *p = &cxlr->params; |
| uuid_t temp; |
| ssize_t rc; |
| |
| if (len != UUID_STRING_LEN + 1) |
| return -EINVAL; |
| |
| rc = uuid_parse(buf, &temp); |
| if (rc) |
| return rc; |
| |
| if (uuid_is_null(&temp)) |
| return -EINVAL; |
| |
| rc = down_write_killable(&cxl_region_rwsem); |
| if (rc) |
| return rc; |
| |
| if (uuid_equal(&p->uuid, &temp)) |
| goto out; |
| |
| rc = -EBUSY; |
| if (p->state >= CXL_CONFIG_ACTIVE) |
| goto out; |
| |
| rc = bus_for_each_dev(&cxl_bus_type, NULL, &temp, is_dup); |
| if (rc < 0) |
| goto out; |
| |
| uuid_copy(&p->uuid, &temp); |
| out: |
| up_write(&cxl_region_rwsem); |
| |
| if (rc) |
| return rc; |
| return len; |
| } |
| static DEVICE_ATTR_RW(uuid); |
| |
| static struct cxl_region_ref *cxl_rr_load(struct cxl_port *port, |
| struct cxl_region *cxlr) |
| { |
| return xa_load(&port->regions, (unsigned long)cxlr); |
| } |
| |
| static int cxl_region_invalidate_memregion(struct cxl_region *cxlr) |
| { |
| if (!cpu_cache_has_invalidate_memregion()) { |
| if (IS_ENABLED(CONFIG_CXL_REGION_INVALIDATION_TEST)) { |
| dev_info_once( |
| &cxlr->dev, |
| "Bypassing cpu_cache_invalidate_memregion() for testing!\n"); |
| return 0; |
| } else { |
| dev_err(&cxlr->dev, |
| "Failed to synchronize CPU cache state\n"); |
| return -ENXIO; |
| } |
| } |
| |
| cpu_cache_invalidate_memregion(IORES_DESC_CXL); |
| return 0; |
| } |
| |
| static int cxl_region_decode_reset(struct cxl_region *cxlr, int count) |
| { |
| struct cxl_region_params *p = &cxlr->params; |
| int i, rc = 0; |
| |
| /* |
| * Before region teardown attempt to flush, and if the flush |
| * fails cancel the region teardown for data consistency |
| * concerns |
| */ |
| rc = cxl_region_invalidate_memregion(cxlr); |
| if (rc) |
| return rc; |
| |
| for (i = count - 1; i >= 0; i--) { |
| struct cxl_endpoint_decoder *cxled = p->targets[i]; |
| struct cxl_memdev *cxlmd = cxled_to_memdev(cxled); |
| struct cxl_port *iter = cxled_to_port(cxled); |
| struct cxl_dev_state *cxlds = cxlmd->cxlds; |
| struct cxl_ep *ep; |
| |
| if (cxlds->rcd) |
| goto endpoint_reset; |
| |
| while (!is_cxl_root(to_cxl_port(iter->dev.parent))) |
| iter = to_cxl_port(iter->dev.parent); |
| |
| for (ep = cxl_ep_load(iter, cxlmd); iter; |
| iter = ep->next, ep = cxl_ep_load(iter, cxlmd)) { |
| struct cxl_region_ref *cxl_rr; |
| struct cxl_decoder *cxld; |
| |
| cxl_rr = cxl_rr_load(iter, cxlr); |
| cxld = cxl_rr->decoder; |
| if (cxld->reset) |
| rc = cxld->reset(cxld); |
| if (rc) |
| return rc; |
| set_bit(CXL_REGION_F_NEEDS_RESET, &cxlr->flags); |
| } |
| |
| endpoint_reset: |
| rc = cxled->cxld.reset(&cxled->cxld); |
| if (rc) |
| return rc; |
| set_bit(CXL_REGION_F_NEEDS_RESET, &cxlr->flags); |
| } |
| |
| /* all decoders associated with this region have been torn down */ |
| clear_bit(CXL_REGION_F_NEEDS_RESET, &cxlr->flags); |
| |
| return 0; |
| } |
| |
| static int commit_decoder(struct cxl_decoder *cxld) |
| { |
| struct cxl_switch_decoder *cxlsd = NULL; |
| |
| if (cxld->commit) |
| return cxld->commit(cxld); |
| |
| if (is_switch_decoder(&cxld->dev)) |
| cxlsd = to_cxl_switch_decoder(&cxld->dev); |
| |
| if (dev_WARN_ONCE(&cxld->dev, !cxlsd || cxlsd->nr_targets > 1, |
| "->commit() is required\n")) |
| return -ENXIO; |
| return 0; |
| } |
| |
| static int cxl_region_decode_commit(struct cxl_region *cxlr) |
| { |
| struct cxl_region_params *p = &cxlr->params; |
| int i, rc = 0; |
| |
| for (i = 0; i < p->nr_targets; i++) { |
| struct cxl_endpoint_decoder *cxled = p->targets[i]; |
| struct cxl_memdev *cxlmd = cxled_to_memdev(cxled); |
| struct cxl_region_ref *cxl_rr; |
| struct cxl_decoder *cxld; |
| struct cxl_port *iter; |
| struct cxl_ep *ep; |
| |
| /* commit bottom up */ |
| for (iter = cxled_to_port(cxled); !is_cxl_root(iter); |
| iter = to_cxl_port(iter->dev.parent)) { |
| cxl_rr = cxl_rr_load(iter, cxlr); |
| cxld = cxl_rr->decoder; |
| rc = commit_decoder(cxld); |
| if (rc) |
| break; |
| } |
| |
| if (rc) { |
| /* programming @iter failed, teardown */ |
| for (ep = cxl_ep_load(iter, cxlmd); ep && iter; |
| iter = ep->next, ep = cxl_ep_load(iter, cxlmd)) { |
| cxl_rr = cxl_rr_load(iter, cxlr); |
| cxld = cxl_rr->decoder; |
| if (cxld->reset) |
| cxld->reset(cxld); |
| } |
| |
| cxled->cxld.reset(&cxled->cxld); |
| goto err; |
| } |
| } |
| |
| return 0; |
| |
| err: |
| /* undo the targets that were successfully committed */ |
| cxl_region_decode_reset(cxlr, i); |
| return rc; |
| } |
| |
| static ssize_t commit_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t len) |
| { |
| struct cxl_region *cxlr = to_cxl_region(dev); |
| struct cxl_region_params *p = &cxlr->params; |
| bool commit; |
| ssize_t rc; |
| |
| rc = kstrtobool(buf, &commit); |
| if (rc) |
| return rc; |
| |
| rc = down_write_killable(&cxl_region_rwsem); |
| if (rc) |
| return rc; |
| |
| /* Already in the requested state? */ |
| if (commit && p->state >= CXL_CONFIG_COMMIT) |
| goto out; |
| if (!commit && p->state < CXL_CONFIG_COMMIT) |
| goto out; |
| |
| /* Not ready to commit? */ |
| if (commit && p->state < CXL_CONFIG_ACTIVE) { |
| rc = -ENXIO; |
| goto out; |
| } |
| |
| /* |
| * Invalidate caches before region setup to drop any speculative |
| * consumption of this address space |
| */ |
| rc = cxl_region_invalidate_memregion(cxlr); |
| if (rc) |
| goto out; |
| |
| if (commit) { |
| rc = cxl_region_decode_commit(cxlr); |
| if (rc == 0) |
| p->state = CXL_CONFIG_COMMIT; |
| } else { |
| p->state = CXL_CONFIG_RESET_PENDING; |
| up_write(&cxl_region_rwsem); |
| device_release_driver(&cxlr->dev); |
| down_write(&cxl_region_rwsem); |
| |
| /* |
| * The lock was dropped, so need to revalidate that the reset is |
| * still pending. |
| */ |
| if (p->state == CXL_CONFIG_RESET_PENDING) { |
| rc = cxl_region_decode_reset(cxlr, p->interleave_ways); |
| /* |
| * Revert to committed since there may still be active |
| * decoders associated with this region, or move forward |
| * to active to mark the reset successful |
| */ |
| if (rc) |
| p->state = CXL_CONFIG_COMMIT; |
| else |
| p->state = CXL_CONFIG_ACTIVE; |
| } |
| } |
| |
| out: |
| up_write(&cxl_region_rwsem); |
| |
| if (rc) |
| return rc; |
| return len; |
| } |
| |
| static ssize_t commit_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct cxl_region *cxlr = to_cxl_region(dev); |
| struct cxl_region_params *p = &cxlr->params; |
| ssize_t rc; |
| |
| rc = down_read_interruptible(&cxl_region_rwsem); |
| if (rc) |
| return rc; |
| rc = sysfs_emit(buf, "%d\n", p->state >= CXL_CONFIG_COMMIT); |
| up_read(&cxl_region_rwsem); |
| |
| return rc; |
| } |
| static DEVICE_ATTR_RW(commit); |
| |
| static umode_t cxl_region_visible(struct kobject *kobj, struct attribute *a, |
| int n) |
| { |
| struct device *dev = kobj_to_dev(kobj); |
| struct cxl_region *cxlr = to_cxl_region(dev); |
| |
| /* |
| * Support tooling that expects to find a 'uuid' attribute for all |
| * regions regardless of mode. |
| */ |
| if (a == &dev_attr_uuid.attr && cxlr->mode != CXL_DECODER_PMEM) |
| return 0444; |
| return a->mode; |
| } |
| |
| static ssize_t interleave_ways_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct cxl_region *cxlr = to_cxl_region(dev); |
| struct cxl_region_params *p = &cxlr->params; |
| ssize_t rc; |
| |
| rc = down_read_interruptible(&cxl_region_rwsem); |
| if (rc) |
| return rc; |
| rc = sysfs_emit(buf, "%d\n", p->interleave_ways); |
| up_read(&cxl_region_rwsem); |
| |
| return rc; |
| } |
| |
| static const struct attribute_group *get_cxl_region_target_group(void); |
| |
| static ssize_t interleave_ways_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t len) |
| { |
| struct cxl_root_decoder *cxlrd = to_cxl_root_decoder(dev->parent); |
| struct cxl_decoder *cxld = &cxlrd->cxlsd.cxld; |
| struct cxl_region *cxlr = to_cxl_region(dev); |
| struct cxl_region_params *p = &cxlr->params; |
| unsigned int val, save; |
| int rc; |
| u8 iw; |
| |
| rc = kstrtouint(buf, 0, &val); |
| if (rc) |
| return rc; |
| |
| rc = ways_to_eiw(val, &iw); |
| if (rc) |
| return rc; |
| |
| /* |
| * Even for x3, x6, and x12 interleaves the region interleave must be a |
| * power of 2 multiple of the host bridge interleave. |
| */ |
| if (!is_power_of_2(val / cxld->interleave_ways) || |
| (val % cxld->interleave_ways)) { |
| dev_dbg(&cxlr->dev, "invalid interleave: %d\n", val); |
| return -EINVAL; |
| } |
| |
| rc = down_write_killable(&cxl_region_rwsem); |
| if (rc) |
| return rc; |
| if (p->state >= CXL_CONFIG_INTERLEAVE_ACTIVE) { |
| rc = -EBUSY; |
| goto out; |
| } |
| |
| save = p->interleave_ways; |
| p->interleave_ways = val; |
| rc = sysfs_update_group(&cxlr->dev.kobj, get_cxl_region_target_group()); |
| if (rc) |
| p->interleave_ways = save; |
| out: |
| up_write(&cxl_region_rwsem); |
| if (rc) |
| return rc; |
| return len; |
| } |
| static DEVICE_ATTR_RW(interleave_ways); |
| |
| static ssize_t interleave_granularity_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct cxl_region *cxlr = to_cxl_region(dev); |
| struct cxl_region_params *p = &cxlr->params; |
| ssize_t rc; |
| |
| rc = down_read_interruptible(&cxl_region_rwsem); |
| if (rc) |
| return rc; |
| rc = sysfs_emit(buf, "%d\n", p->interleave_granularity); |
| up_read(&cxl_region_rwsem); |
| |
| return rc; |
| } |
| |
| static ssize_t interleave_granularity_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t len) |
| { |
| struct cxl_root_decoder *cxlrd = to_cxl_root_decoder(dev->parent); |
| struct cxl_decoder *cxld = &cxlrd->cxlsd.cxld; |
| struct cxl_region *cxlr = to_cxl_region(dev); |
| struct cxl_region_params *p = &cxlr->params; |
| int rc, val; |
| u16 ig; |
| |
| rc = kstrtoint(buf, 0, &val); |
| if (rc) |
| return rc; |
| |
| rc = granularity_to_eig(val, &ig); |
| if (rc) |
| return rc; |
| |
| /* |
| * When the host-bridge is interleaved, disallow region granularity != |
| * root granularity. Regions with a granularity less than the root |
| * interleave result in needing multiple endpoints to support a single |
| * slot in the interleave (possible to support in the future). Regions |
| * with a granularity greater than the root interleave result in invalid |
| * DPA translations (invalid to support). |
| */ |
| if (cxld->interleave_ways > 1 && val != cxld->interleave_granularity) |
| return -EINVAL; |
| |
| rc = down_write_killable(&cxl_region_rwsem); |
| if (rc) |
| return rc; |
| if (p->state >= CXL_CONFIG_INTERLEAVE_ACTIVE) { |
| rc = -EBUSY; |
| goto out; |
| } |
| |
| p->interleave_granularity = val; |
| out: |
| up_write(&cxl_region_rwsem); |
| if (rc) |
| return rc; |
| return len; |
| } |
| static DEVICE_ATTR_RW(interleave_granularity); |
| |
| static ssize_t resource_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct cxl_region *cxlr = to_cxl_region(dev); |
| struct cxl_region_params *p = &cxlr->params; |
| u64 resource = -1ULL; |
| ssize_t rc; |
| |
| rc = down_read_interruptible(&cxl_region_rwsem); |
| if (rc) |
| return rc; |
| if (p->res) |
| resource = p->res->start; |
| rc = sysfs_emit(buf, "%#llx\n", resource); |
| up_read(&cxl_region_rwsem); |
| |
| return rc; |
| } |
| static DEVICE_ATTR_RO(resource); |
| |
| static ssize_t mode_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct cxl_region *cxlr = to_cxl_region(dev); |
| |
| return sysfs_emit(buf, "%s\n", cxl_decoder_mode_name(cxlr->mode)); |
| } |
| static DEVICE_ATTR_RO(mode); |
| |
| static int alloc_hpa(struct cxl_region *cxlr, resource_size_t size) |
| { |
| struct cxl_root_decoder *cxlrd = to_cxl_root_decoder(cxlr->dev.parent); |
| struct cxl_region_params *p = &cxlr->params; |
| struct resource *res; |
| u64 remainder = 0; |
| |
| lockdep_assert_held_write(&cxl_region_rwsem); |
| |
| /* Nothing to do... */ |
| if (p->res && resource_size(p->res) == size) |
| return 0; |
| |
| /* To change size the old size must be freed first */ |
| if (p->res) |
| return -EBUSY; |
| |
| if (p->state >= CXL_CONFIG_INTERLEAVE_ACTIVE) |
| return -EBUSY; |
| |
| /* ways, granularity and uuid (if PMEM) need to be set before HPA */ |
| if (!p->interleave_ways || !p->interleave_granularity || |
| (cxlr->mode == CXL_DECODER_PMEM && uuid_is_null(&p->uuid))) |
| return -ENXIO; |
| |
| div64_u64_rem(size, (u64)SZ_256M * p->interleave_ways, &remainder); |
| if (remainder) |
| return -EINVAL; |
| |
| res = alloc_free_mem_region(cxlrd->res, size, SZ_256M, |
| dev_name(&cxlr->dev)); |
| if (IS_ERR(res)) { |
| dev_dbg(&cxlr->dev, |
| "HPA allocation error (%ld) for size:%pap in %s %pr\n", |
| PTR_ERR(res), &size, cxlrd->res->name, cxlrd->res); |
| return PTR_ERR(res); |
| } |
| |
| p->res = res; |
| p->state = CXL_CONFIG_INTERLEAVE_ACTIVE; |
| |
| return 0; |
| } |
| |
| static void cxl_region_iomem_release(struct cxl_region *cxlr) |
| { |
| struct cxl_region_params *p = &cxlr->params; |
| |
| if (device_is_registered(&cxlr->dev)) |
| lockdep_assert_held_write(&cxl_region_rwsem); |
| if (p->res) { |
| /* |
| * Autodiscovered regions may not have been able to insert their |
| * resource. |
| */ |
| if (p->res->parent) |
| remove_resource(p->res); |
| kfree(p->res); |
| p->res = NULL; |
| } |
| } |
| |
| static int free_hpa(struct cxl_region *cxlr) |
| { |
| struct cxl_region_params *p = &cxlr->params; |
| |
| lockdep_assert_held_write(&cxl_region_rwsem); |
| |
| if (!p->res) |
| return 0; |
| |
| if (p->state >= CXL_CONFIG_ACTIVE) |
| return -EBUSY; |
| |
| cxl_region_iomem_release(cxlr); |
| p->state = CXL_CONFIG_IDLE; |
| return 0; |
| } |
| |
| static ssize_t size_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t len) |
| { |
| struct cxl_region *cxlr = to_cxl_region(dev); |
| u64 val; |
| int rc; |
| |
| rc = kstrtou64(buf, 0, &val); |
| if (rc) |
| return rc; |
| |
| rc = down_write_killable(&cxl_region_rwsem); |
| if (rc) |
| return rc; |
| |
| if (val) |
| rc = alloc_hpa(cxlr, val); |
| else |
| rc = free_hpa(cxlr); |
| up_write(&cxl_region_rwsem); |
| |
| if (rc) |
| return rc; |
| |
| return len; |
| } |
| |
| static ssize_t size_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct cxl_region *cxlr = to_cxl_region(dev); |
| struct cxl_region_params *p = &cxlr->params; |
| u64 size = 0; |
| ssize_t rc; |
| |
| rc = down_read_interruptible(&cxl_region_rwsem); |
| if (rc) |
| return rc; |
| if (p->res) |
| size = resource_size(p->res); |
| rc = sysfs_emit(buf, "%#llx\n", size); |
| up_read(&cxl_region_rwsem); |
| |
| return rc; |
| } |
| static DEVICE_ATTR_RW(size); |
| |
| static struct attribute *cxl_region_attrs[] = { |
| &dev_attr_uuid.attr, |
| &dev_attr_commit.attr, |
| &dev_attr_interleave_ways.attr, |
| &dev_attr_interleave_granularity.attr, |
| &dev_attr_resource.attr, |
| &dev_attr_size.attr, |
| &dev_attr_mode.attr, |
| NULL, |
| }; |
| |
| static const struct attribute_group cxl_region_group = { |
| .attrs = cxl_region_attrs, |
| .is_visible = cxl_region_visible, |
| }; |
| |
| static size_t show_targetN(struct cxl_region *cxlr, char *buf, int pos) |
| { |
| struct cxl_region_params *p = &cxlr->params; |
| struct cxl_endpoint_decoder *cxled; |
| int rc; |
| |
| rc = down_read_interruptible(&cxl_region_rwsem); |
| if (rc) |
| return rc; |
| |
| if (pos >= p->interleave_ways) { |
| dev_dbg(&cxlr->dev, "position %d out of range %d\n", pos, |
| p->interleave_ways); |
| rc = -ENXIO; |
| goto out; |
| } |
| |
| cxled = p->targets[pos]; |
| if (!cxled) |
| rc = sysfs_emit(buf, "\n"); |
| else |
| rc = sysfs_emit(buf, "%s\n", dev_name(&cxled->cxld.dev)); |
| out: |
| up_read(&cxl_region_rwsem); |
| |
| return rc; |
| } |
| |
| static int match_free_decoder(struct device *dev, void *data) |
| { |
| struct cxl_decoder *cxld; |
| int *id = data; |
| |
| if (!is_switch_decoder(dev)) |
| return 0; |
| |
| cxld = to_cxl_decoder(dev); |
| |
| /* enforce ordered allocation */ |
| if (cxld->id != *id) |
| return 0; |
| |
| if (!cxld->region) |
| return 1; |
| |
| (*id)++; |
| |
| return 0; |
| } |
| |
| static int match_auto_decoder(struct device *dev, void *data) |
| { |
| struct cxl_region_params *p = data; |
| struct cxl_decoder *cxld; |
| struct range *r; |
| |
| if (!is_switch_decoder(dev)) |
| return 0; |
| |
| cxld = to_cxl_decoder(dev); |
| r = &cxld->hpa_range; |
| |
| if (p->res && p->res->start == r->start && p->res->end == r->end) |
| return 1; |
| |
| return 0; |
| } |
| |
| static struct cxl_decoder * |
| cxl_region_find_decoder(struct cxl_port *port, |
| struct cxl_endpoint_decoder *cxled, |
| struct cxl_region *cxlr) |
| { |
| struct device *dev; |
| int id = 0; |
| |
| if (port == cxled_to_port(cxled)) |
| return &cxled->cxld; |
| |
| if (test_bit(CXL_REGION_F_AUTO, &cxlr->flags)) |
| dev = device_find_child(&port->dev, &cxlr->params, |
| match_auto_decoder); |
| else |
| dev = device_find_child(&port->dev, &id, match_free_decoder); |
| if (!dev) |
| return NULL; |
| /* |
| * This decoder is pinned registered as long as the endpoint decoder is |
| * registered, and endpoint decoder unregistration holds the |
| * cxl_region_rwsem over unregister events, so no need to hold on to |
| * this extra reference. |
| */ |
| put_device(dev); |
| return to_cxl_decoder(dev); |
| } |
| |
| static bool auto_order_ok(struct cxl_port *port, struct cxl_region *cxlr_iter, |
| struct cxl_decoder *cxld) |
| { |
| struct cxl_region_ref *rr = cxl_rr_load(port, cxlr_iter); |
| struct cxl_decoder *cxld_iter = rr->decoder; |
| |
| /* |
| * Allow the out of order assembly of auto-discovered regions. |
| * Per CXL Spec 3.1 8.2.4.20.12 software must commit decoders |
| * in HPA order. Confirm that the decoder with the lesser HPA |
| * starting address has the lesser id. |
| */ |
| dev_dbg(&cxld->dev, "check for HPA violation %s:%d < %s:%d\n", |
| dev_name(&cxld->dev), cxld->id, |
| dev_name(&cxld_iter->dev), cxld_iter->id); |
| |
| if (cxld_iter->id > cxld->id) |
| return true; |
| |
| return false; |
| } |
| |
| static struct cxl_region_ref * |
| alloc_region_ref(struct cxl_port *port, struct cxl_region *cxlr, |
| struct cxl_endpoint_decoder *cxled) |
| { |
| struct cxl_region_params *p = &cxlr->params; |
| struct cxl_region_ref *cxl_rr, *iter; |
| unsigned long index; |
| int rc; |
| |
| xa_for_each(&port->regions, index, iter) { |
| struct cxl_region_params *ip = &iter->region->params; |
| |
| if (!ip->res || ip->res->start < p->res->start) |
| continue; |
| |
| if (test_bit(CXL_REGION_F_AUTO, &cxlr->flags)) { |
| struct cxl_decoder *cxld; |
| |
| cxld = cxl_region_find_decoder(port, cxled, cxlr); |
| if (auto_order_ok(port, iter->region, cxld)) |
| continue; |
| } |
| dev_dbg(&cxlr->dev, "%s: HPA order violation %s:%pr vs %pr\n", |
| dev_name(&port->dev), |
| dev_name(&iter->region->dev), ip->res, p->res); |
| |
| return ERR_PTR(-EBUSY); |
| } |
| |
| cxl_rr = kzalloc(sizeof(*cxl_rr), GFP_KERNEL); |
| if (!cxl_rr) |
| return ERR_PTR(-ENOMEM); |
| cxl_rr->port = port; |
| cxl_rr->region = cxlr; |
| cxl_rr->nr_targets = 1; |
| xa_init(&cxl_rr->endpoints); |
| |
| rc = xa_insert(&port->regions, (unsigned long)cxlr, cxl_rr, GFP_KERNEL); |
| if (rc) { |
| dev_dbg(&cxlr->dev, |
| "%s: failed to track region reference: %d\n", |
| dev_name(&port->dev), rc); |
| kfree(cxl_rr); |
| return ERR_PTR(rc); |
| } |
| |
| return cxl_rr; |
| } |
| |
| static void cxl_rr_free_decoder(struct cxl_region_ref *cxl_rr) |
| { |
| struct cxl_region *cxlr = cxl_rr->region; |
| struct cxl_decoder *cxld = cxl_rr->decoder; |
| |
| if (!cxld) |
| return; |
| |
| dev_WARN_ONCE(&cxlr->dev, cxld->region != cxlr, "region mismatch\n"); |
| if (cxld->region == cxlr) { |
| cxld->region = NULL; |
| put_device(&cxlr->dev); |
| } |
| } |
| |
| static void free_region_ref(struct cxl_region_ref *cxl_rr) |
| { |
| struct cxl_port *port = cxl_rr->port; |
| struct cxl_region *cxlr = cxl_rr->region; |
| |
| cxl_rr_free_decoder(cxl_rr); |
| xa_erase(&port->regions, (unsigned long)cxlr); |
| xa_destroy(&cxl_rr->endpoints); |
| kfree(cxl_rr); |
| } |
| |
| static int cxl_rr_ep_add(struct cxl_region_ref *cxl_rr, |
| struct cxl_endpoint_decoder *cxled) |
| { |
| int rc; |
| struct cxl_port *port = cxl_rr->port; |
| struct cxl_region *cxlr = cxl_rr->region; |
| struct cxl_decoder *cxld = cxl_rr->decoder; |
| struct cxl_ep *ep = cxl_ep_load(port, cxled_to_memdev(cxled)); |
| |
| if (ep) { |
| rc = xa_insert(&cxl_rr->endpoints, (unsigned long)cxled, ep, |
| GFP_KERNEL); |
| if (rc) |
| return rc; |
| } |
| cxl_rr->nr_eps++; |
| |
| if (!cxld->region) { |
| cxld->region = cxlr; |
| get_device(&cxlr->dev); |
| } |
| |
| return 0; |
| } |
| |
| static int cxl_rr_alloc_decoder(struct cxl_port *port, struct cxl_region *cxlr, |
| struct cxl_endpoint_decoder *cxled, |
| struct cxl_region_ref *cxl_rr) |
| { |
| struct cxl_decoder *cxld; |
| |
| cxld = cxl_region_find_decoder(port, cxled, cxlr); |
| if (!cxld) { |
| dev_dbg(&cxlr->dev, "%s: no decoder available\n", |
| dev_name(&port->dev)); |
| return -EBUSY; |
| } |
| |
| if (cxld->region) { |
| dev_dbg(&cxlr->dev, "%s: %s already attached to %s\n", |
| dev_name(&port->dev), dev_name(&cxld->dev), |
| dev_name(&cxld->region->dev)); |
| return -EBUSY; |
| } |
| |
| /* |
| * Endpoints should already match the region type, but backstop that |
| * assumption with an assertion. Switch-decoders change mapping-type |
| * based on what is mapped when they are assigned to a region. |
| */ |
| dev_WARN_ONCE(&cxlr->dev, |
| port == cxled_to_port(cxled) && |
| cxld->target_type != cxlr->type, |
| "%s:%s mismatch decoder type %d -> %d\n", |
| dev_name(&cxled_to_memdev(cxled)->dev), |
| dev_name(&cxld->dev), cxld->target_type, cxlr->type); |
| cxld->target_type = cxlr->type; |
| cxl_rr->decoder = cxld; |
| return 0; |
| } |
| |
| /** |
| * cxl_port_attach_region() - track a region's interest in a port by endpoint |
| * @port: port to add a new region reference 'struct cxl_region_ref' |
| * @cxlr: region to attach to @port |
| * @cxled: endpoint decoder used to create or further pin a region reference |
| * @pos: interleave position of @cxled in @cxlr |
| * |
| * The attach event is an opportunity to validate CXL decode setup |
| * constraints and record metadata needed for programming HDM decoders, |
| * in particular decoder target lists. |
| * |
| * The steps are: |
| * |
| * - validate that there are no other regions with a higher HPA already |
| * associated with @port |
| * - establish a region reference if one is not already present |
| * |
| * - additionally allocate a decoder instance that will host @cxlr on |
| * @port |
| * |
| * - pin the region reference by the endpoint |
| * - account for how many entries in @port's target list are needed to |
| * cover all of the added endpoints. |
| */ |
| static int cxl_port_attach_region(struct cxl_port *port, |
| struct cxl_region *cxlr, |
| struct cxl_endpoint_decoder *cxled, int pos) |
| { |
| struct cxl_memdev *cxlmd = cxled_to_memdev(cxled); |
| struct cxl_ep *ep = cxl_ep_load(port, cxlmd); |
| struct cxl_region_ref *cxl_rr; |
| bool nr_targets_inc = false; |
| struct cxl_decoder *cxld; |
| unsigned long index; |
| int rc = -EBUSY; |
| |
| lockdep_assert_held_write(&cxl_region_rwsem); |
| |
| cxl_rr = cxl_rr_load(port, cxlr); |
| if (cxl_rr) { |
| struct cxl_ep *ep_iter; |
| int found = 0; |
| |
| /* |
| * Walk the existing endpoints that have been attached to |
| * @cxlr at @port and see if they share the same 'next' port |
| * in the downstream direction. I.e. endpoints that share common |
| * upstream switch. |
| */ |
| xa_for_each(&cxl_rr->endpoints, index, ep_iter) { |
| if (ep_iter == ep) |
| continue; |
| if (ep_iter->next == ep->next) { |
| found++; |
| break; |
| } |
| } |
| |
| /* |
| * New target port, or @port is an endpoint port that always |
| * accounts its own local decode as a target. |
| */ |
| if (!found || !ep->next) { |
| cxl_rr->nr_targets++; |
| nr_targets_inc = true; |
| } |
| } else { |
| cxl_rr = alloc_region_ref(port, cxlr, cxled); |
| if (IS_ERR(cxl_rr)) { |
| dev_dbg(&cxlr->dev, |
| "%s: failed to allocate region reference\n", |
| dev_name(&port->dev)); |
| return PTR_ERR(cxl_rr); |
| } |
| nr_targets_inc = true; |
| |
| rc = cxl_rr_alloc_decoder(port, cxlr, cxled, cxl_rr); |
| if (rc) |
| goto out_erase; |
| } |
| cxld = cxl_rr->decoder; |
| |
| /* |
| * the number of targets should not exceed the target_count |
| * of the decoder |
| */ |
| if (is_switch_decoder(&cxld->dev)) { |
| struct cxl_switch_decoder *cxlsd; |
| |
| cxlsd = to_cxl_switch_decoder(&cxld->dev); |
| if (cxl_rr->nr_targets > cxlsd->nr_targets) { |
| dev_dbg(&cxlr->dev, |
| "%s:%s %s add: %s:%s @ %d overflows targets: %d\n", |
| dev_name(port->uport_dev), dev_name(&port->dev), |
| dev_name(&cxld->dev), dev_name(&cxlmd->dev), |
| dev_name(&cxled->cxld.dev), pos, |
| cxlsd->nr_targets); |
| rc = -ENXIO; |
| goto out_erase; |
| } |
| } |
| |
| rc = cxl_rr_ep_add(cxl_rr, cxled); |
| if (rc) { |
| dev_dbg(&cxlr->dev, |
| "%s: failed to track endpoint %s:%s reference\n", |
| dev_name(&port->dev), dev_name(&cxlmd->dev), |
| dev_name(&cxld->dev)); |
| goto out_erase; |
| } |
| |
| dev_dbg(&cxlr->dev, |
| "%s:%s %s add: %s:%s @ %d next: %s nr_eps: %d nr_targets: %d\n", |
| dev_name(port->uport_dev), dev_name(&port->dev), |
| dev_name(&cxld->dev), dev_name(&cxlmd->dev), |
| dev_name(&cxled->cxld.dev), pos, |
| ep ? ep->next ? dev_name(ep->next->uport_dev) : |
| dev_name(&cxlmd->dev) : |
| "none", |
| cxl_rr->nr_eps, cxl_rr->nr_targets); |
| |
| return 0; |
| out_erase: |
| if (nr_targets_inc) |
| cxl_rr->nr_targets--; |
| if (cxl_rr->nr_eps == 0) |
| free_region_ref(cxl_rr); |
| return rc; |
| } |
| |
| static void cxl_port_detach_region(struct cxl_port *port, |
| struct cxl_region *cxlr, |
| struct cxl_endpoint_decoder *cxled) |
| { |
| struct cxl_region_ref *cxl_rr; |
| struct cxl_ep *ep = NULL; |
| |
| lockdep_assert_held_write(&cxl_region_rwsem); |
| |
| cxl_rr = cxl_rr_load(port, cxlr); |
| if (!cxl_rr) |
| return; |
| |
| /* |
| * Endpoint ports do not carry cxl_ep references, and they |
| * never target more than one endpoint by definition |
| */ |
| if (cxl_rr->decoder == &cxled->cxld) |
| cxl_rr->nr_eps--; |
| else |
| ep = xa_erase(&cxl_rr->endpoints, (unsigned long)cxled); |
| if (ep) { |
| struct cxl_ep *ep_iter; |
| unsigned long index; |
| int found = 0; |
| |
| cxl_rr->nr_eps--; |
| xa_for_each(&cxl_rr->endpoints, index, ep_iter) { |
| if (ep_iter->next == ep->next) { |
| found++; |
| break; |
| } |
| } |
| if (!found) |
| cxl_rr->nr_targets--; |
| } |
| |
| if (cxl_rr->nr_eps == 0) |
| free_region_ref(cxl_rr); |
| } |
| |
| static int check_last_peer(struct cxl_endpoint_decoder *cxled, |
| struct cxl_ep *ep, struct cxl_region_ref *cxl_rr, |
| int distance) |
| { |
| struct cxl_memdev *cxlmd = cxled_to_memdev(cxled); |
| struct cxl_region *cxlr = cxl_rr->region; |
| struct cxl_region_params *p = &cxlr->params; |
| struct cxl_endpoint_decoder *cxled_peer; |
| struct cxl_port *port = cxl_rr->port; |
| struct cxl_memdev *cxlmd_peer; |
| struct cxl_ep *ep_peer; |
| int pos = cxled->pos; |
| |
| /* |
| * If this position wants to share a dport with the last endpoint mapped |
| * then that endpoint, at index 'position - distance', must also be |
| * mapped by this dport. |
| */ |
| if (pos < distance) { |
| dev_dbg(&cxlr->dev, "%s:%s: cannot host %s:%s at %d\n", |
| dev_name(port->uport_dev), dev_name(&port->dev), |
| dev_name(&cxlmd->dev), dev_name(&cxled->cxld.dev), pos); |
| return -ENXIO; |
| } |
| cxled_peer = p->targets[pos - distance]; |
| cxlmd_peer = cxled_to_memdev(cxled_peer); |
| ep_peer = cxl_ep_load(port, cxlmd_peer); |
| if (ep->dport != ep_peer->dport) { |
| dev_dbg(&cxlr->dev, |
| "%s:%s: %s:%s pos %d mismatched peer %s:%s\n", |
| dev_name(port->uport_dev), dev_name(&port->dev), |
| dev_name(&cxlmd->dev), dev_name(&cxled->cxld.dev), pos, |
| dev_name(&cxlmd_peer->dev), |
| dev_name(&cxled_peer->cxld.dev)); |
| return -ENXIO; |
| } |
| |
| return 0; |
| } |
| |
| static int check_interleave_cap(struct cxl_decoder *cxld, int iw, int ig) |
| { |
| struct cxl_port *port = to_cxl_port(cxld->dev.parent); |
| struct cxl_hdm *cxlhdm = dev_get_drvdata(&port->dev); |
| unsigned int interleave_mask; |
| u8 eiw; |
| u16 eig; |
| int high_pos, low_pos; |
| |
| if (!test_bit(iw, &cxlhdm->iw_cap_mask)) |
| return -ENXIO; |
| /* |
| * Per CXL specification r3.1(8.2.4.20.13 Decoder Protection), |
| * if eiw < 8: |
| * DPAOFFSET[51: eig + 8] = HPAOFFSET[51: eig + 8 + eiw] |
| * DPAOFFSET[eig + 7: 0] = HPAOFFSET[eig + 7: 0] |
| * |
| * when the eiw is 0, all the bits of HPAOFFSET[51: 0] are used, the |
| * interleave bits are none. |
| * |
| * if eiw >= 8: |
| * DPAOFFSET[51: eig + 8] = HPAOFFSET[51: eig + eiw] / 3 |
| * DPAOFFSET[eig + 7: 0] = HPAOFFSET[eig + 7: 0] |
| * |
| * when the eiw is 8, all the bits of HPAOFFSET[51: 0] are used, the |
| * interleave bits are none. |
| */ |
| ways_to_eiw(iw, &eiw); |
| if (eiw == 0 || eiw == 8) |
| return 0; |
| |
| granularity_to_eig(ig, &eig); |
| if (eiw > 8) |
| high_pos = eiw + eig - 1; |
| else |
| high_pos = eiw + eig + 7; |
| low_pos = eig + 8; |
| interleave_mask = GENMASK(high_pos, low_pos); |
| if (interleave_mask & ~cxlhdm->interleave_mask) |
| return -ENXIO; |
| |
| return 0; |
| } |
| |
| static int cxl_port_setup_targets(struct cxl_port *port, |
| struct cxl_region *cxlr, |
| struct cxl_endpoint_decoder *cxled) |
| { |
| struct cxl_root_decoder *cxlrd = to_cxl_root_decoder(cxlr->dev.parent); |
| int parent_iw, parent_ig, ig, iw, rc, inc = 0, pos = cxled->pos; |
| struct cxl_port *parent_port = to_cxl_port(port->dev.parent); |
| struct cxl_region_ref *cxl_rr = cxl_rr_load(port, cxlr); |
| struct cxl_memdev *cxlmd = cxled_to_memdev(cxled); |
| struct cxl_ep *ep = cxl_ep_load(port, cxlmd); |
| struct cxl_region_params *p = &cxlr->params; |
| struct cxl_decoder *cxld = cxl_rr->decoder; |
| struct cxl_switch_decoder *cxlsd; |
| u16 eig, peig; |
| u8 eiw, peiw; |
| |
| /* |
| * While root level decoders support x3, x6, x12, switch level |
| * decoders only support powers of 2 up to x16. |
| */ |
| if (!is_power_of_2(cxl_rr->nr_targets)) { |
| dev_dbg(&cxlr->dev, "%s:%s: invalid target count %d\n", |
| dev_name(port->uport_dev), dev_name(&port->dev), |
| cxl_rr->nr_targets); |
| return -EINVAL; |
| } |
| |
| cxlsd = to_cxl_switch_decoder(&cxld->dev); |
| if (cxl_rr->nr_targets_set) { |
| int i, distance; |
| |
| /* |
| * Passthrough decoders impose no distance requirements between |
| * peers |
| */ |
| if (cxl_rr->nr_targets == 1) |
| distance = 0; |
| else |
| distance = p->nr_targets / cxl_rr->nr_targets; |
| for (i = 0; i < cxl_rr->nr_targets_set; i++) |
| if (ep->dport == cxlsd->target[i]) { |
| rc = check_last_peer(cxled, ep, cxl_rr, |
| distance); |
| if (rc) |
| return rc; |
| goto out_target_set; |
| } |
| goto add_target; |
| } |
| |
| if (is_cxl_root(parent_port)) { |
| /* |
| * Root decoder IG is always set to value in CFMWS which |
| * may be different than this region's IG. We can use the |
| * region's IG here since interleave_granularity_store() |
| * does not allow interleaved host-bridges with |
| * root IG != region IG. |
| */ |
| parent_ig = p->interleave_granularity; |
| parent_iw = cxlrd->cxlsd.cxld.interleave_ways; |
| /* |
| * For purposes of address bit routing, use power-of-2 math for |
| * switch ports. |
| */ |
| if (!is_power_of_2(parent_iw)) |
| parent_iw /= 3; |
| } else { |
| struct cxl_region_ref *parent_rr; |
| struct cxl_decoder *parent_cxld; |
| |
| parent_rr = cxl_rr_load(parent_port, cxlr); |
| parent_cxld = parent_rr->decoder; |
| parent_ig = parent_cxld->interleave_granularity; |
| parent_iw = parent_cxld->interleave_ways; |
| } |
| |
| rc = granularity_to_eig(parent_ig, &peig); |
| if (rc) { |
| dev_dbg(&cxlr->dev, "%s:%s: invalid parent granularity: %d\n", |
| dev_name(parent_port->uport_dev), |
| dev_name(&parent_port->dev), parent_ig); |
| return rc; |
| } |
| |
| rc = ways_to_eiw(parent_iw, &peiw); |
| if (rc) { |
| dev_dbg(&cxlr->dev, "%s:%s: invalid parent interleave: %d\n", |
| dev_name(parent_port->uport_dev), |
| dev_name(&parent_port->dev), parent_iw); |
| return rc; |
| } |
| |
| iw = cxl_rr->nr_targets; |
| rc = ways_to_eiw(iw, &eiw); |
| if (rc) { |
| dev_dbg(&cxlr->dev, "%s:%s: invalid port interleave: %d\n", |
| dev_name(port->uport_dev), dev_name(&port->dev), iw); |
| return rc; |
| } |
| |
| /* |
| * Interleave granularity is a multiple of @parent_port granularity. |
| * Multiplier is the parent port interleave ways. |
| */ |
| rc = granularity_to_eig(parent_ig * parent_iw, &eig); |
| if (rc) { |
| dev_dbg(&cxlr->dev, |
| "%s: invalid granularity calculation (%d * %d)\n", |
| dev_name(&parent_port->dev), parent_ig, parent_iw); |
| return rc; |
| } |
| |
| rc = eig_to_granularity(eig, &ig); |
| if (rc) { |
| dev_dbg(&cxlr->dev, "%s:%s: invalid interleave: %d\n", |
| dev_name(port->uport_dev), dev_name(&port->dev), |
| 256 << eig); |
| return rc; |
| } |
| |
| if (iw > 8 || iw > cxlsd->nr_targets) { |
| dev_dbg(&cxlr->dev, |
| "%s:%s:%s: ways: %d overflows targets: %d\n", |
| dev_name(port->uport_dev), dev_name(&port->dev), |
| dev_name(&cxld->dev), iw, cxlsd->nr_targets); |
| return -ENXIO; |
| } |
| |
| if (test_bit(CXL_REGION_F_AUTO, &cxlr->flags)) { |
| if (cxld->interleave_ways != iw || |
| cxld->interleave_granularity != ig || |
| cxld->hpa_range.start != p->res->start || |
| cxld->hpa_range.end != p->res->end || |
| ((cxld->flags & CXL_DECODER_F_ENABLE) == 0)) { |
| dev_err(&cxlr->dev, |
| "%s:%s %s expected iw: %d ig: %d %pr\n", |
| dev_name(port->uport_dev), dev_name(&port->dev), |
| __func__, iw, ig, p->res); |
| dev_err(&cxlr->dev, |
| "%s:%s %s got iw: %d ig: %d state: %s %#llx:%#llx\n", |
| dev_name(port->uport_dev), dev_name(&port->dev), |
| __func__, cxld->interleave_ways, |
| cxld->interleave_granularity, |
| (cxld->flags & CXL_DECODER_F_ENABLE) ? |
| "enabled" : |
| "disabled", |
| cxld->hpa_range.start, cxld->hpa_range.end); |
| return -ENXIO; |
| } |
| } else { |
| rc = check_interleave_cap(cxld, iw, ig); |
| if (rc) { |
| dev_dbg(&cxlr->dev, |
| "%s:%s iw: %d ig: %d is not supported\n", |
| dev_name(port->uport_dev), |
| dev_name(&port->dev), iw, ig); |
| return rc; |
| } |
| |
| cxld->interleave_ways = iw; |
| cxld->interleave_granularity = ig; |
| cxld->hpa_range = (struct range) { |
| .start = p->res->start, |
| .end = p->res->end, |
| }; |
| } |
| dev_dbg(&cxlr->dev, "%s:%s iw: %d ig: %d\n", dev_name(port->uport_dev), |
| dev_name(&port->dev), iw, ig); |
| add_target: |
| if (cxl_rr->nr_targets_set == cxl_rr->nr_targets) { |
| dev_dbg(&cxlr->dev, |
| "%s:%s: targets full trying to add %s:%s at %d\n", |
| dev_name(port->uport_dev), dev_name(&port->dev), |
| dev_name(&cxlmd->dev), dev_name(&cxled->cxld.dev), pos); |
| return -ENXIO; |
| } |
| if (test_bit(CXL_REGION_F_AUTO, &cxlr->flags)) { |
| if (cxlsd->target[cxl_rr->nr_targets_set] != ep->dport) { |
| dev_dbg(&cxlr->dev, "%s:%s: %s expected %s at %d\n", |
| dev_name(port->uport_dev), dev_name(&port->dev), |
| dev_name(&cxlsd->cxld.dev), |
| dev_name(ep->dport->dport_dev), |
| cxl_rr->nr_targets_set); |
| return -ENXIO; |
| } |
| } else |
| cxlsd->target[cxl_rr->nr_targets_set] = ep->dport; |
| inc = 1; |
| out_target_set: |
| cxl_rr->nr_targets_set += inc; |
| dev_dbg(&cxlr->dev, "%s:%s target[%d] = %s for %s:%s @ %d\n", |
| dev_name(port->uport_dev), dev_name(&port->dev), |
| cxl_rr->nr_targets_set - 1, dev_name(ep->dport->dport_dev), |
| dev_name(&cxlmd->dev), dev_name(&cxled->cxld.dev), pos); |
| |
| return 0; |
| } |
| |
| static void cxl_port_reset_targets(struct cxl_port *port, |
| struct cxl_region *cxlr) |
| { |
| struct cxl_region_ref *cxl_rr = cxl_rr_load(port, cxlr); |
| struct cxl_decoder *cxld; |
| |
| /* |
| * After the last endpoint has been detached the entire cxl_rr may now |
| * be gone. |
| */ |
| if (!cxl_rr) |
| return; |
| cxl_rr->nr_targets_set = 0; |
| |
| cxld = cxl_rr->decoder; |
| cxld->hpa_range = (struct range) { |
| .start = 0, |
| .end = -1, |
| }; |
| } |
| |
| static void cxl_region_teardown_targets(struct cxl_region *cxlr) |
| { |
| struct cxl_region_params *p = &cxlr->params; |
| struct cxl_endpoint_decoder *cxled; |
| struct cxl_dev_state *cxlds; |
| struct cxl_memdev *cxlmd; |
| struct cxl_port *iter; |
| struct cxl_ep *ep; |
| int i; |
| |
| /* |
| * In the auto-discovery case skip automatic teardown since the |
| * address space is already active |
| */ |
| if (test_bit(CXL_REGION_F_AUTO, &cxlr->flags)) |
| return; |
| |
| for (i = 0; i < p->nr_targets; i++) { |
| cxled = p->targets[i]; |
| cxlmd = cxled_to_memdev(cxled); |
| cxlds = cxlmd->cxlds; |
| |
| if (cxlds->rcd) |
| continue; |
| |
| iter = cxled_to_port(cxled); |
| while (!is_cxl_root(to_cxl_port(iter->dev.parent))) |
| iter = to_cxl_port(iter->dev.parent); |
| |
| for (ep = cxl_ep_load(iter, cxlmd); iter; |
| iter = ep->next, ep = cxl_ep_load(iter, cxlmd)) |
| cxl_port_reset_targets(iter, cxlr); |
| } |
| } |
| |
| static int cxl_region_setup_targets(struct cxl_region *cxlr) |
| { |
| struct cxl_region_params *p = &cxlr->params; |
| struct cxl_endpoint_decoder *cxled; |
| struct cxl_dev_state *cxlds; |
| int i, rc, rch = 0, vh = 0; |
| struct cxl_memdev *cxlmd; |
| struct cxl_port *iter; |
| struct cxl_ep *ep; |
| |
| for (i = 0; i < p->nr_targets; i++) { |
| cxled = p->targets[i]; |
| cxlmd = cxled_to_memdev(cxled); |
| cxlds = cxlmd->cxlds; |
| |
| /* validate that all targets agree on topology */ |
| if (!cxlds->rcd) { |
| vh++; |
| } else { |
| rch++; |
| continue; |
| } |
| |
| iter = cxled_to_port(cxled); |
| while (!is_cxl_root(to_cxl_port(iter->dev.parent))) |
| iter = to_cxl_port(iter->dev.parent); |
| |
| /* |
| * Descend the topology tree programming / validating |
| * targets while looking for conflicts. |
| */ |
| for (ep = cxl_ep_load(iter, cxlmd); iter; |
| iter = ep->next, ep = cxl_ep_load(iter, cxlmd)) { |
| rc = cxl_port_setup_targets(iter, cxlr, cxled); |
| if (rc) { |
| cxl_region_teardown_targets(cxlr); |
| return rc; |
| } |
| } |
| } |
| |
| if (rch && vh) { |
| dev_err(&cxlr->dev, "mismatched CXL topologies detected\n"); |
| cxl_region_teardown_targets(cxlr); |
| return -ENXIO; |
| } |
| |
| return 0; |
| } |
| |
| static int cxl_region_validate_position(struct cxl_region *cxlr, |
| struct cxl_endpoint_decoder *cxled, |
| int pos) |
| { |
| struct cxl_memdev *cxlmd = cxled_to_memdev(cxled); |
| struct cxl_region_params *p = &cxlr->params; |
| int i; |
| |
| if (pos < 0 || pos >= p->interleave_ways) { |
| dev_dbg(&cxlr->dev, "position %d out of range %d\n", pos, |
| p->interleave_ways); |
| return -ENXIO; |
| } |
| |
| if (p->targets[pos] == cxled) |
| return 0; |
| |
| if (p->targets[pos]) { |
| struct cxl_endpoint_decoder *cxled_target = p->targets[pos]; |
| struct cxl_memdev *cxlmd_target = cxled_to_memdev(cxled_target); |
| |
| dev_dbg(&cxlr->dev, "position %d already assigned to %s:%s\n", |
| pos, dev_name(&cxlmd_target->dev), |
| dev_name(&cxled_target->cxld.dev)); |
| return -EBUSY; |
| } |
| |
| for (i = 0; i < p->interleave_ways; i++) { |
| struct cxl_endpoint_decoder *cxled_target; |
| struct cxl_memdev *cxlmd_target; |
| |
| cxled_target = p->targets[i]; |
| if (!cxled_target) |
| continue; |
| |
| cxlmd_target = cxled_to_memdev(cxled_target); |
| if (cxlmd_target == cxlmd) { |
| dev_dbg(&cxlr->dev, |
| "%s already specified at position %d via: %s\n", |
| dev_name(&cxlmd->dev), pos, |
| dev_name(&cxled_target->cxld.dev)); |
| return -EBUSY; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int cxl_region_attach_position(struct cxl_region *cxlr, |
| struct cxl_root_decoder *cxlrd, |
| struct cxl_endpoint_decoder *cxled, |
| const struct cxl_dport *dport, int pos) |
| { |
| struct cxl_memdev *cxlmd = cxled_to_memdev(cxled); |
| struct cxl_switch_decoder *cxlsd = &cxlrd->cxlsd; |
| struct cxl_decoder *cxld = &cxlsd->cxld; |
| int iw = cxld->interleave_ways; |
| struct cxl_port *iter; |
| int rc; |
| |
| if (dport != cxlrd->cxlsd.target[pos % iw]) { |
| dev_dbg(&cxlr->dev, "%s:%s invalid target position for %s\n", |
| dev_name(&cxlmd->dev), dev_name(&cxled->cxld.dev), |
| dev_name(&cxlrd->cxlsd.cxld.dev)); |
| return -ENXIO; |
| } |
| |
| for (iter = cxled_to_port(cxled); !is_cxl_root(iter); |
| iter = to_cxl_port(iter->dev.parent)) { |
| rc = cxl_port_attach_region(iter, cxlr, cxled, pos); |
| if (rc) |
| goto err; |
| } |
| |
| return 0; |
| |
| err: |
| for (iter = cxled_to_port(cxled); !is_cxl_root(iter); |
| iter = to_cxl_port(iter->dev.parent)) |
| cxl_port_detach_region(iter, cxlr, cxled); |
| return rc; |
| } |
| |
| static int cxl_region_attach_auto(struct cxl_region *cxlr, |
| struct cxl_endpoint_decoder *cxled, int pos) |
| { |
| struct cxl_region_params *p = &cxlr->params; |
| |
| if (cxled->state != CXL_DECODER_STATE_AUTO) { |
| dev_err(&cxlr->dev, |
| "%s: unable to add decoder to autodetected region\n", |
| dev_name(&cxled->cxld.dev)); |
| return -EINVAL; |
| } |
| |
| if (pos >= 0) { |
| dev_dbg(&cxlr->dev, "%s: expected auto position, not %d\n", |
| dev_name(&cxled->cxld.dev), pos); |
| return -EINVAL; |
| } |
| |
| if (p->nr_targets >= p->interleave_ways) { |
| dev_err(&cxlr->dev, "%s: no more target slots available\n", |
| dev_name(&cxled->cxld.dev)); |
| return -ENXIO; |
| } |
| |
| /* |
| * Temporarily record the endpoint decoder into the target array. Yes, |
| * this means that userspace can view devices in the wrong position |
| * before the region activates, and must be careful to understand when |
| * it might be racing region autodiscovery. |
| */ |
| pos = p->nr_targets; |
| p->targets[pos] = cxled; |
| cxled->pos = pos; |
| p->nr_targets++; |
| |
| return 0; |
| } |
| |
| static int cmp_interleave_pos(const void *a, const void *b) |
| { |
| struct cxl_endpoint_decoder *cxled_a = *(typeof(cxled_a) *)a; |
| struct cxl_endpoint_decoder *cxled_b = *(typeof(cxled_b) *)b; |
| |
| return cxled_a->pos - cxled_b->pos; |
| } |
| |
| static struct cxl_port *next_port(struct cxl_port *port) |
| { |
| if (!port->parent_dport) |
| return NULL; |
| return port->parent_dport->port; |
| } |
| |
| static int match_switch_decoder_by_range(struct device *dev, void *data) |
| { |
| struct cxl_switch_decoder *cxlsd; |
| struct range *r1, *r2 = data; |
| |
| if (!is_switch_decoder(dev)) |
| return 0; |
| |
| cxlsd = to_cxl_switch_decoder(dev); |
| r1 = &cxlsd->cxld.hpa_range; |
| |
| if (is_root_decoder(dev)) |
| return range_contains(r1, r2); |
| return (r1->start == r2->start && r1->end == r2->end); |
| } |
| |
| static int find_pos_and_ways(struct cxl_port *port, struct range *range, |
| int *pos, int *ways) |
| { |
| struct cxl_switch_decoder *cxlsd; |
| struct cxl_port *parent; |
| struct device *dev; |
| int rc = -ENXIO; |
| |
| parent = next_port(port); |
| if (!parent) |
| return rc; |
| |
| dev = device_find_child(&parent->dev, range, |
| match_switch_decoder_by_range); |
| if (!dev) { |
| dev_err(port->uport_dev, |
| "failed to find decoder mapping %#llx-%#llx\n", |
| range->start, range->end); |
| return rc; |
| } |
| cxlsd = to_cxl_switch_decoder(dev); |
| *ways = cxlsd->cxld.interleave_ways; |
| |
| for (int i = 0; i < *ways; i++) { |
| if (cxlsd->target[i] == port->parent_dport) { |
| *pos = i; |
| rc = 0; |
| break; |
| } |
| } |
| put_device(dev); |
| |
| return rc; |
| } |
| |
| /** |
| * cxl_calc_interleave_pos() - calculate an endpoint position in a region |
| * @cxled: endpoint decoder member of given region |
| * |
| * The endpoint position is calculated by traversing the topology from |
| * the endpoint to the root decoder and iteratively applying this |
| * calculation: |
| * |
| * position = position * parent_ways + parent_pos; |
| * |
| * ...where @position is inferred from switch and root decoder target lists. |
| * |
| * Return: position >= 0 on success |
| * -ENXIO on failure |
| */ |
| static int cxl_calc_interleave_pos(struct cxl_endpoint_decoder *cxled) |
| { |
| struct cxl_port *iter, *port = cxled_to_port(cxled); |
| struct cxl_memdev *cxlmd = cxled_to_memdev(cxled); |
| struct range *range = &cxled->cxld.hpa_range; |
| int parent_ways = 0, parent_pos = 0, pos = 0; |
| int rc; |
| |
| /* |
| * Example: the expected interleave order of the 4-way region shown |
| * below is: mem0, mem2, mem1, mem3 |
| * |
| * root_port |
| * / \ |
| * host_bridge_0 host_bridge_1 |
| * | | | | |
| * mem0 mem1 mem2 mem3 |
| * |
| * In the example the calculator will iterate twice. The first iteration |
| * uses the mem position in the host-bridge and the ways of the host- |
| * bridge to generate the first, or local, position. The second |
| * iteration uses the host-bridge position in the root_port and the ways |
| * of the root_port to refine the position. |
| * |
| * A trace of the calculation per endpoint looks like this: |
| * mem0: pos = 0 * 2 + 0 mem2: pos = 0 * 2 + 0 |
| * pos = 0 * 2 + 0 pos = 0 * 2 + 1 |
| * pos: 0 pos: 1 |
| * |
| * mem1: pos = 0 * 2 + 1 mem3: pos = 0 * 2 + 1 |
| * pos = 1 * 2 + 0 pos = 1 * 2 + 1 |
| * pos: 2 pos = 3 |
| * |
| * Note that while this example is simple, the method applies to more |
| * complex topologies, including those with switches. |
| */ |
| |
| /* Iterate from endpoint to root_port refining the position */ |
| for (iter = port; iter; iter = next_port(iter)) { |
| if (is_cxl_root(iter)) |
| break; |
| |
| rc = find_pos_and_ways(iter, range, &parent_pos, &parent_ways); |
| if (rc) |
| return rc; |
| |
| pos = pos * parent_ways + parent_pos; |
| } |
| |
| dev_dbg(&cxlmd->dev, |
| "decoder:%s parent:%s port:%s range:%#llx-%#llx pos:%d\n", |
| dev_name(&cxled->cxld.dev), dev_name(cxlmd->dev.parent), |
| dev_name(&port->dev), range->start, range->end, pos); |
| |
| return pos; |
| } |
| |
| static int cxl_region_sort_targets(struct cxl_region *cxlr) |
| { |
| struct cxl_region_params *p = &cxlr->params; |
| int i, rc = 0; |
| |
| for (i = 0; i < p->nr_targets; i++) { |
| struct cxl_endpoint_decoder *cxled = p->targets[i]; |
| |
| cxled->pos = cxl_calc_interleave_pos(cxled); |
| /* |
| * Record that sorting failed, but still continue to calc |
| * cxled->pos so that follow-on code paths can reliably |
| * do p->targets[cxled->pos] to self-reference their entry. |
| */ |
| if (cxled->pos < 0) |
| rc = -ENXIO; |
| } |
| /* Keep the cxlr target list in interleave position order */ |
| sort(p->targets, p->nr_targets, sizeof(p->targets[0]), |
| cmp_interleave_pos, NULL); |
| |
| dev_dbg(&cxlr->dev, "region sort %s\n", rc ? "failed" : "successful"); |
| return rc; |
| } |
| |
| static int cxl_region_attach(struct cxl_region *cxlr, |
| struct cxl_endpoint_decoder *cxled, int pos) |
| { |
| struct cxl_root_decoder *cxlrd = to_cxl_root_decoder(cxlr->dev.parent); |
| struct cxl_memdev *cxlmd = cxled_to_memdev(cxled); |
| struct cxl_region_params *p = &cxlr->params; |
| struct cxl_port *ep_port, *root_port; |
| struct cxl_dport *dport; |
| int rc = -ENXIO; |
| |
| rc = check_interleave_cap(&cxled->cxld, p->interleave_ways, |
| p->interleave_granularity); |
| if (rc) { |
| dev_dbg(&cxlr->dev, "%s iw: %d ig: %d is not supported\n", |
| dev_name(&cxled->cxld.dev), p->interleave_ways, |
| p->interleave_granularity); |
| return rc; |
| } |
| |
| if (cxled->mode != cxlr->mode) { |
| dev_dbg(&cxlr->dev, "%s region mode: %d mismatch: %d\n", |
| dev_name(&cxled->cxld.dev), cxlr->mode, cxled->mode); |
| return -EINVAL; |
| } |
| |
| if (cxled->mode == CXL_DECODER_DEAD) { |
| dev_dbg(&cxlr->dev, "%s dead\n", dev_name(&cxled->cxld.dev)); |
| return -ENODEV; |
| } |
| |
| /* all full of members, or interleave config not established? */ |
| if (p->state > CXL_CONFIG_INTERLEAVE_ACTIVE) { |
| dev_dbg(&cxlr->dev, "region already active\n"); |
| return -EBUSY; |
| } else if (p->state < CXL_CONFIG_INTERLEAVE_ACTIVE) { |
| dev_dbg(&cxlr->dev, "interleave config missing\n"); |
| return -ENXIO; |
| } |
| |
| if (p->nr_targets >= p->interleave_ways) { |
| dev_dbg(&cxlr->dev, "region already has %d endpoints\n", |
| p->nr_targets); |
| return -EINVAL; |
| } |
| |
| ep_port = cxled_to_port(cxled); |
| root_port = cxlrd_to_port(cxlrd); |
| dport = cxl_find_dport_by_dev(root_port, ep_port->host_bridge); |
| if (!dport) { |
| dev_dbg(&cxlr->dev, "%s:%s invalid target for %s\n", |
| dev_name(&cxlmd->dev), dev_name(&cxled->cxld.dev), |
| dev_name(cxlr->dev.parent)); |
| return -ENXIO; |
| } |
| |
| if (cxled->cxld.target_type != cxlr->type) { |
| dev_dbg(&cxlr->dev, "%s:%s type mismatch: %d vs %d\n", |
| dev_name(&cxlmd->dev), dev_name(&cxled->cxld.dev), |
| cxled->cxld.target_type, cxlr->type); |
| return -ENXIO; |
| } |
| |
| if (!cxled->dpa_res) { |
| dev_dbg(&cxlr->dev, "%s:%s: missing DPA allocation.\n", |
| dev_name(&cxlmd->dev), dev_name(&cxled->cxld.dev)); |
| return -ENXIO; |
| } |
| |
| if (resource_size(cxled->dpa_res) * p->interleave_ways != |
| resource_size(p->res)) { |
| dev_dbg(&cxlr->dev, |
| "%s:%s: decoder-size-%#llx * ways-%d != region-size-%#llx\n", |
| dev_name(&cxlmd->dev), dev_name(&cxled->cxld.dev), |
| (u64)resource_size(cxled->dpa_res), p->interleave_ways, |
| (u64)resource_size(p->res)); |
| return -EINVAL; |
| } |
| |
| cxl_region_perf_data_calculate(cxlr, cxled); |
| |
| if (test_bit(CXL_REGION_F_AUTO, &cxlr->flags)) { |
| int i; |
| |
| rc = cxl_region_attach_auto(cxlr, cxled, pos); |
| if (rc) |
| return rc; |
| |
| /* await more targets to arrive... */ |
| if (p->nr_targets < p->interleave_ways) |
| return 0; |
| |
| /* |
| * All targets are here, which implies all PCI enumeration that |
| * affects this region has been completed. Walk the topology to |
| * sort the devices into their relative region decode position. |
| */ |
| rc = cxl_region_sort_targets(cxlr); |
| if (rc) |
| return rc; |
| |
| for (i = 0; i < p->nr_targets; i++) { |
| cxled = p->targets[i]; |
| ep_port = cxled_to_port(cxled); |
| dport = cxl_find_dport_by_dev(root_port, |
| ep_port->host_bridge); |
| rc = cxl_region_attach_position(cxlr, cxlrd, cxled, |
| dport, i); |
| if (rc) |
| return rc; |
| } |
| |
| rc = cxl_region_setup_targets(cxlr); |
| if (rc) |
| return rc; |
| |
| /* |
| * If target setup succeeds in the autodiscovery case |
| * then the region is already committed. |
| */ |
| p->state = CXL_CONFIG_COMMIT; |
| |
| return 0; |
| } |
| |
| rc = cxl_region_validate_position(cxlr, cxled, pos); |
| if (rc) |
| return rc; |
| |
| rc = cxl_region_attach_position(cxlr, cxlrd, cxled, dport, pos); |
| if (rc) |
| return rc; |
| |
| p->targets[pos] = cxled; |
| cxled->pos = pos; |
| p->nr_targets++; |
| |
| if (p->nr_targets == p->interleave_ways) { |
| rc = cxl_region_setup_targets(cxlr); |
| if (rc) |
| return rc; |
| p->state = CXL_CONFIG_ACTIVE; |
| } |
| |
| cxled->cxld.interleave_ways = p->interleave_ways; |
| cxled->cxld.interleave_granularity = p->interleave_granularity; |
| cxled->cxld.hpa_range = (struct range) { |
| .start = p->res->start, |
| .end = p->res->end, |
| }; |
| |
| if (p->nr_targets != p->interleave_ways) |
| return 0; |
| |
| /* |
| * Test the auto-discovery position calculator function |
| * against this successfully created user-defined region. |
| * A fail message here means that this interleave config |
| * will fail when presented as CXL_REGION_F_AUTO. |
| */ |
| for (int i = 0; i < p->nr_targets; i++) { |
| struct cxl_endpoint_decoder *cxled = p->targets[i]; |
| int test_pos; |
| |
| test_pos = cxl_calc_interleave_pos(cxled); |
| dev_dbg(&cxled->cxld.dev, |
| "Test cxl_calc_interleave_pos(): %s test_pos:%d cxled->pos:%d\n", |
| (test_pos == cxled->pos) ? "success" : "fail", |
| test_pos, cxled->pos); |
| } |
| |
| return 0; |
| } |
| |
| static int cxl_region_detach(struct cxl_endpoint_decoder *cxled) |
| { |
| struct cxl_port *iter, *ep_port = cxled_to_port(cxled); |
| struct cxl_region *cxlr = cxled->cxld.region; |
| struct cxl_region_params *p; |
| int rc = 0; |
| |
| lockdep_assert_held_write(&cxl_region_rwsem); |
| |
| if (!cxlr) |
| return 0; |
| |
| p = &cxlr->params; |
| get_device(&cxlr->dev); |
| |
| if (p->state > CXL_CONFIG_ACTIVE) { |
| /* |
| * TODO: tear down all impacted regions if a device is |
| * removed out of order |
| */ |
| rc = cxl_region_decode_reset(cxlr, p->interleave_ways); |
| if (rc) |
| goto out; |
| p->state = CXL_CONFIG_ACTIVE; |
| } |
| |
| for (iter = ep_port; !is_cxl_root(iter); |
| iter = to_cxl_port(iter->dev.parent)) |
| cxl_port_detach_region(iter, cxlr, cxled); |
| |
| if (cxled->pos < 0 || cxled->pos >= p->interleave_ways || |
| p->targets[cxled->pos] != cxled) { |
| struct cxl_memdev *cxlmd = cxled_to_memdev(cxled); |
| |
| dev_WARN_ONCE(&cxlr->dev, 1, "expected %s:%s at position %d\n", |
| dev_name(&cxlmd->dev), dev_name(&cxled->cxld.dev), |
| cxled->pos); |
| goto out; |
| } |
| |
| if (p->state == CXL_CONFIG_ACTIVE) { |
| p->state = CXL_CONFIG_INTERLEAVE_ACTIVE; |
| cxl_region_teardown_targets(cxlr); |
| } |
| p->targets[cxled->pos] = NULL; |
| p->nr_targets--; |
| cxled->cxld.hpa_range = (struct range) { |
| .start = 0, |
| .end = -1, |
| }; |
| |
| /* notify the region driver that one of its targets has departed */ |
| up_write(&cxl_region_rwsem); |
| device_release_driver(&cxlr->dev); |
| down_write(&cxl_region_rwsem); |
| out: |
| put_device(&cxlr->dev); |
| return rc; |
| } |
| |
| void cxl_decoder_kill_region(struct cxl_endpoint_decoder *cxled) |
| { |
| down_write(&cxl_region_rwsem); |
| cxled->mode = CXL_DECODER_DEAD; |
| cxl_region_detach(cxled); |
| up_write(&cxl_region_rwsem); |
| } |
| |
| static int attach_target(struct cxl_region *cxlr, |
| struct cxl_endpoint_decoder *cxled, int pos, |
| unsigned int state) |
| { |
| int rc = 0; |
| |
| if (state == TASK_INTERRUPTIBLE) |
| rc = down_write_killable(&cxl_region_rwsem); |
| else |
| down_write(&cxl_region_rwsem); |
| if (rc) |
| return rc; |
| |
| down_read(&cxl_dpa_rwsem); |
| rc = cxl_region_attach(cxlr, cxled, pos); |
| up_read(&cxl_dpa_rwsem); |
| up_write(&cxl_region_rwsem); |
| return rc; |
| } |
| |
| static int detach_target(struct cxl_region *cxlr, int pos) |
| { |
| struct cxl_region_params *p = &cxlr->params; |
| int rc; |
| |
| rc = down_write_killable(&cxl_region_rwsem); |
| if (rc) |
| return rc; |
| |
| if (pos >= p->interleave_ways) { |
| dev_dbg(&cxlr->dev, "position %d out of range %d\n", pos, |
| p->interleave_ways); |
| rc = -ENXIO; |
| goto out; |
| } |
| |
| if (!p->targets[pos]) { |
| rc = 0; |
| goto out; |
| } |
| |
| rc = cxl_region_detach(p->targets[pos]); |
| out: |
| up_write(&cxl_region_rwsem); |
| return rc; |
| } |
| |
| static size_t store_targetN(struct cxl_region *cxlr, const char *buf, int pos, |
| size_t len) |
| { |
| int rc; |
| |
| if (sysfs_streq(buf, "\n")) |
| rc = detach_target(cxlr, pos); |
| else { |
| struct device *dev; |
| |
| dev = bus_find_device_by_name(&cxl_bus_type, NULL, buf); |
| if (!dev) |
| return -ENODEV; |
| |
| if (!is_endpoint_decoder(dev)) { |
| rc = -EINVAL; |
| goto out; |
| } |
| |
| rc = attach_target(cxlr, to_cxl_endpoint_decoder(dev), pos, |
| TASK_INTERRUPTIBLE); |
| out: |
| put_device(dev); |
| } |
| |
| if (rc < 0) |
| return rc; |
| return len; |
| } |
| |
| #define TARGET_ATTR_RW(n) \ |
| static ssize_t target##n##_show( \ |
| struct device *dev, struct device_attribute *attr, char *buf) \ |
| { \ |
| return show_targetN(to_cxl_region(dev), buf, (n)); \ |
| } \ |
| static ssize_t target##n##_store(struct device *dev, \ |
| struct device_attribute *attr, \ |
| const char *buf, size_t len) \ |
| { \ |
| return store_targetN(to_cxl_region(dev), buf, (n), len); \ |
| } \ |
| static DEVICE_ATTR_RW(target##n) |
| |
| TARGET_ATTR_RW(0); |
| TARGET_ATTR_RW(1); |
| TARGET_ATTR_RW(2); |
| TARGET_ATTR_RW(3); |
| TARGET_ATTR_RW(4); |
| TARGET_ATTR_RW(5); |
| TARGET_ATTR_RW(6); |
| TARGET_ATTR_RW(7); |
| TARGET_ATTR_RW(8); |
| TARGET_ATTR_RW(9); |
| TARGET_ATTR_RW(10); |
| TARGET_ATTR_RW(11); |
| TARGET_ATTR_RW(12); |
| TARGET_ATTR_RW(13); |
| TARGET_ATTR_RW(14); |
| TARGET_ATTR_RW(15); |
| |
| static struct attribute *target_attrs[] = { |
| &dev_attr_target0.attr, |
| &dev_attr_target1.attr, |
| &dev_attr_target2.attr, |
| &dev_attr_target3.attr, |
| &dev_attr_target4.attr, |
| &dev_attr_target5.attr, |
| &dev_attr_target6.attr, |
| &dev_attr_target7.attr, |
| &dev_attr_target8.attr, |
| &dev_attr_target9.attr, |
| &dev_attr_target10.attr, |
| &dev_attr_target11.attr, |
| &dev_attr_target12.attr, |
| &dev_attr_target13.attr, |
| &dev_attr_target14.attr, |
| &dev_attr_target15.attr, |
| NULL, |
| }; |
| |
| static umode_t cxl_region_target_visible(struct kobject *kobj, |
| struct attribute *a, int n) |
| { |
| struct device *dev = kobj_to_dev(kobj); |
| struct cxl_region *cxlr = to_cxl_region(dev); |
| struct cxl_region_params *p = &cxlr->params; |
| |
| if (n < p->interleave_ways) |
| return a->mode; |
| return 0; |
| } |
| |
| static const struct attribute_group cxl_region_target_group = { |
| .attrs = target_attrs, |
| .is_visible = cxl_region_target_visible, |
| }; |
| |
| static const struct attribute_group *get_cxl_region_target_group(void) |
| { |
| return &cxl_region_target_group; |
| } |
| |
| static const struct attribute_group *region_groups[] = { |
| &cxl_base_attribute_group, |
| &cxl_region_group, |
| &cxl_region_target_group, |
| &cxl_region_access0_coordinate_group, |
| &cxl_region_access1_coordinate_group, |
| NULL, |
| }; |
| |
| static void cxl_region_release(struct device *dev) |
| { |
| struct cxl_root_decoder *cxlrd = to_cxl_root_decoder(dev->parent); |
| struct cxl_region *cxlr = to_cxl_region(dev); |
| int id = atomic_read(&cxlrd->region_id); |
| |
| /* |
| * Try to reuse the recently idled id rather than the cached |
| * next id to prevent the region id space from increasing |
| * unnecessarily. |
| */ |
| if (cxlr->id < id) |
| if (atomic_try_cmpxchg(&cxlrd->region_id, &id, cxlr->id)) { |
| memregion_free(id); |
| goto out; |
| } |
| |
| memregion_free(cxlr->id); |
| out: |
| put_device(dev->parent); |
| kfree(cxlr); |
| } |
| |
| const struct device_type cxl_region_type = { |
| .name = "cxl_region", |
| .release = cxl_region_release, |
| .groups = region_groups |
| }; |
| |
| bool is_cxl_region(struct device *dev) |
| { |
| return dev->type == &cxl_region_type; |
| } |
| EXPORT_SYMBOL_NS_GPL(is_cxl_region, CXL); |
| |
| static struct cxl_region *to_cxl_region(struct device *dev) |
| { |
| if (dev_WARN_ONCE(dev, dev->type != &cxl_region_type, |
| "not a cxl_region device\n")) |
| return NULL; |
| |
| return container_of(dev, struct cxl_region, dev); |
| } |
| |
| static void unregister_region(void *_cxlr) |
| { |
| struct cxl_region *cxlr = _cxlr; |
| struct cxl_region_params *p = &cxlr->params; |
| int i; |
| |
| unregister_memory_notifier(&cxlr->memory_notifier); |
| unregister_mt_adistance_algorithm(&cxlr->adist_notifier); |
| device_del(&cxlr->dev); |
| |
| /* |
| * Now that region sysfs is shutdown, the parameter block is now |
| * read-only, so no need to hold the region rwsem to access the |
| * region parameters. |
| */ |
| for (i = 0; i < p->interleave_ways; i++) |
| detach_target(cxlr, i); |
| |
| cxl_region_iomem_release(cxlr); |
| put_device(&cxlr->dev); |
| } |
| |
| static struct lock_class_key cxl_region_key; |
| |
| static struct cxl_region *cxl_region_alloc(struct cxl_root_decoder *cxlrd, int id) |
| { |
| struct cxl_region *cxlr; |
| struct device *dev; |
| |
| cxlr = kzalloc(sizeof(*cxlr), GFP_KERNEL); |
| if (!cxlr) { |
| memregion_free(id); |
| return ERR_PTR(-ENOMEM); |
| } |
| |
| dev = &cxlr->dev; |
| device_initialize(dev); |
| lockdep_set_class(&dev->mutex, &cxl_region_key); |
| dev->parent = &cxlrd->cxlsd.cxld.dev; |
| /* |
| * Keep root decoder pinned through cxl_region_release to fixup |
| * region id allocations |
| */ |
| get_device(dev->parent); |
| device_set_pm_not_required(dev); |
| dev->bus = &cxl_bus_type; |
| dev->type = &cxl_region_type; |
| cxlr->id = id; |
| |
| return cxlr; |
| } |
| |
| static bool cxl_region_update_coordinates(struct cxl_region *cxlr, int nid) |
| { |
| int cset = 0; |
| int rc; |
| |
| for (int i = 0; i < ACCESS_COORDINATE_MAX; i++) { |
| if (cxlr->coord[i].read_bandwidth) { |
| rc = 0; |
| if (cxl_need_node_perf_attrs_update(nid)) |
| node_set_perf_attrs(nid, &cxlr->coord[i], i); |
| else |
| rc = cxl_update_hmat_access_coordinates(nid, cxlr, i); |
| |
| if (rc == 0) |
| cset++; |
| } |
| } |
| |
| if (!cset) |
| return false; |
| |
| rc = sysfs_update_group(&cxlr->dev.kobj, get_cxl_region_access0_group()); |
| if (rc) |
| dev_dbg(&cxlr->dev, "Failed to update access0 group\n"); |
| |
| rc = sysfs_update_group(&cxlr->dev.kobj, get_cxl_region_access1_group()); |
| if (rc) |
| dev_dbg(&cxlr->dev, "Failed to update access1 group\n"); |
| |
| return true; |
| } |
| |
| static int cxl_region_nid(struct cxl_region *cxlr) |
| { |
| struct cxl_region_params *p = &cxlr->params; |
| struct resource *res; |
| |
| guard(rwsem_read)(&cxl_region_rwsem); |
| res = p->res; |
| if (!res) |
| return NUMA_NO_NODE; |
| return phys_to_target_node(res->start); |
| } |
| |
| static int cxl_region_perf_attrs_callback(struct notifier_block *nb, |
| unsigned long action, void *arg) |
| { |
| struct cxl_region *cxlr = container_of(nb, struct cxl_region, |
| memory_notifier); |
| struct memory_notify *mnb = arg; |
| int nid = mnb->status_change_nid; |
| int region_nid; |
| |
| if (nid == NUMA_NO_NODE || action != MEM_ONLINE) |
| return NOTIFY_DONE; |
| |
| region_nid = cxl_region_nid(cxlr); |
| if (nid != region_nid) |
| return NOTIFY_DONE; |
| |
| if (!cxl_region_update_coordinates(cxlr, nid)) |
| return NOTIFY_DONE; |
| |
| return NOTIFY_OK; |
| } |
| |
| static int cxl_region_calculate_adistance(struct notifier_block *nb, |
| unsigned long nid, void *data) |
| { |
| struct cxl_region *cxlr = container_of(nb, struct cxl_region, |
| adist_notifier); |
| struct access_coordinate *perf; |
| int *adist = data; |
| int region_nid; |
| |
| region_nid = cxl_region_nid(cxlr); |
| if (nid != region_nid) |
| return NOTIFY_OK; |
| |
| perf = &cxlr->coord[ACCESS_COORDINATE_CPU]; |
| |
| if (mt_perf_to_adistance(perf, adist)) |
| return NOTIFY_OK; |
| |
| return NOTIFY_STOP; |
| } |
| |
| /** |
| * devm_cxl_add_region - Adds a region to a decoder |
| * @cxlrd: root decoder |
| * @id: memregion id to create, or memregion_free() on failure |
| * @mode: mode for the endpoint decoders of this region |
| * @type: select whether this is an expander or accelerator (type-2 or type-3) |
| * |
| * This is the second step of region initialization. Regions exist within an |
| * address space which is mapped by a @cxlrd. |
| * |
| * Return: 0 if the region was added to the @cxlrd, else returns negative error |
| * code. The region will be named "regionZ" where Z is the unique region number. |
| */ |
| static struct cxl_region *devm_cxl_add_region(struct cxl_root_decoder *cxlrd, |
| int id, |
| enum cxl_decoder_mode mode, |
| enum cxl_decoder_type type) |
| { |
| struct cxl_port *port = to_cxl_port(cxlrd->cxlsd.cxld.dev.parent); |
| struct cxl_region *cxlr; |
| struct device *dev; |
| int rc; |
| |
| cxlr = cxl_region_alloc(cxlrd, id); |
| if (IS_ERR(cxlr)) |
| return cxlr; |
| cxlr->mode = mode; |
| cxlr->type = type; |
| |
| dev = &cxlr->dev; |
| rc = dev_set_name(dev, "region%d", id); |
| if (rc) |
| goto err; |
| |
| rc = device_add(dev); |
| if (rc) |
| goto err; |
| |
| cxlr->memory_notifier.notifier_call = cxl_region_perf_attrs_callback; |
| cxlr->memory_notifier.priority = CXL_CALLBACK_PRI; |
| register_memory_notifier(&cxlr->memory_notifier); |
| |
| cxlr->adist_notifier.notifier_call = cxl_region_calculate_adistance; |
| cxlr->adist_notifier.priority = 100; |
| register_mt_adistance_algorithm(&cxlr->adist_notifier); |
| |
| rc = devm_add_action_or_reset(port->uport_dev, unregister_region, cxlr); |
| if (rc) |
| return ERR_PTR(rc); |
| |
| dev_dbg(port->uport_dev, "%s: created %s\n", |
| dev_name(&cxlrd->cxlsd.cxld.dev), dev_name(dev)); |
| return cxlr; |
| |
| err: |
| put_device(dev); |
| return ERR_PTR(rc); |
| } |
| |
| static ssize_t __create_region_show(struct cxl_root_decoder *cxlrd, char *buf) |
| { |
| return sysfs_emit(buf, "region%u\n", atomic_read(&cxlrd->region_id)); |
| } |
| |
| static ssize_t create_pmem_region_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return __create_region_show(to_cxl_root_decoder(dev), buf); |
| } |
| |
| static ssize_t create_ram_region_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return __create_region_show(to_cxl_root_decoder(dev), buf); |
| } |
| |
| static struct cxl_region *__create_region(struct cxl_root_decoder *cxlrd, |
| enum cxl_decoder_mode mode, int id) |
| { |
| int rc; |
| |
| switch (mode) { |
| case CXL_DECODER_RAM: |
| case CXL_DECODER_PMEM: |
| break; |
| default: |
| dev_err(&cxlrd->cxlsd.cxld.dev, "unsupported mode %d\n", mode); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| rc = memregion_alloc(GFP_KERNEL); |
| if (rc < 0) |
| return ERR_PTR(rc); |
| |
| if (atomic_cmpxchg(&cxlrd->region_id, id, rc) != id) { |
| memregion_free(rc); |
| return ERR_PTR(-EBUSY); |
| } |
| |
| return devm_cxl_add_region(cxlrd, id, mode, CXL_DECODER_HOSTONLYMEM); |
| } |
| |
| static ssize_t create_pmem_region_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t len) |
| { |
| struct cxl_root_decoder *cxlrd = to_cxl_root_decoder(dev); |
| struct cxl_region *cxlr; |
| int rc, id; |
| |
| rc = sscanf(buf, "region%d\n", &id); |
| if (rc != 1) |
| return -EINVAL; |
| |
| cxlr = __create_region(cxlrd, CXL_DECODER_PMEM, id); |
| if (IS_ERR(cxlr)) |
| return PTR_ERR(cxlr); |
| |
| return len; |
| } |
| DEVICE_ATTR_RW(create_pmem_region); |
| |
| static ssize_t create_ram_region_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t len) |
| { |
| struct cxl_root_decoder *cxlrd = to_cxl_root_decoder(dev); |
| struct cxl_region *cxlr; |
| int rc, id; |
| |
| rc = sscanf(buf, "region%d\n", &id); |
| if (rc != 1) |
| return -EINVAL; |
| |
| cxlr = __create_region(cxlrd, CXL_DECODER_RAM, id); |
| if (IS_ERR(cxlr)) |
| return PTR_ERR(cxlr); |
| |
| return len; |
| } |
| DEVICE_ATTR_RW(create_ram_region); |
| |
| static ssize_t region_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct cxl_decoder *cxld = to_cxl_decoder(dev); |
| ssize_t rc; |
| |
| rc = down_read_interruptible(&cxl_region_rwsem); |
| if (rc) |
| return rc; |
| |
| if (cxld->region) |
| rc = sysfs_emit(buf, "%s\n", dev_name(&cxld->region->dev)); |
| else |
| rc = sysfs_emit(buf, "\n"); |
| up_read(&cxl_region_rwsem); |
| |
| return rc; |
| } |
| DEVICE_ATTR_RO(region); |
| |
| static struct cxl_region * |
| cxl_find_region_by_name(struct cxl_root_decoder *cxlrd, const char *name) |
| { |
| struct cxl_decoder *cxld = &cxlrd->cxlsd.cxld; |
| struct device *region_dev; |
| |
| region_dev = device_find_child_by_name(&cxld->dev, name); |
| if (!region_dev) |
| return ERR_PTR(-ENODEV); |
| |
| return to_cxl_region(region_dev); |
| } |
| |
| static ssize_t delete_region_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t len) |
| { |
| struct cxl_root_decoder *cxlrd = to_cxl_root_decoder(dev); |
| struct cxl_port *port = to_cxl_port(dev->parent); |
| struct cxl_region *cxlr; |
| |
| cxlr = cxl_find_region_by_name(cxlrd, buf); |
| if (IS_ERR(cxlr)) |
| return PTR_ERR(cxlr); |
| |
| devm_release_action(port->uport_dev, unregister_region, cxlr); |
| put_device(&cxlr->dev); |
| |
| return len; |
| } |
| DEVICE_ATTR_WO(delete_region); |
| |
| static void cxl_pmem_region_release(struct device *dev) |
| { |
| struct cxl_pmem_region *cxlr_pmem = to_cxl_pmem_region(dev); |
| int i; |
| |
| for (i = 0; i < cxlr_pmem->nr_mappings; i++) { |
| struct cxl_memdev *cxlmd = cxlr_pmem->mapping[i].cxlmd; |
| |
| put_device(&cxlmd->dev); |
| } |
| |
| kfree(cxlr_pmem); |
| } |
| |
| static const struct attribute_group *cxl_pmem_region_attribute_groups[] = { |
| &cxl_base_attribute_group, |
| NULL, |
| }; |
| |
| const struct device_type cxl_pmem_region_type = { |
| .name = "cxl_pmem_region", |
| .release = cxl_pmem_region_release, |
| .groups = cxl_pmem_region_attribute_groups, |
| }; |
| |
| bool is_cxl_pmem_region(struct device *dev) |
| { |
| return dev->type == &cxl_pmem_region_type; |
| } |
| EXPORT_SYMBOL_NS_GPL(is_cxl_pmem_region, CXL); |
| |
| struct cxl_pmem_region *to_cxl_pmem_region(struct device *dev) |
| { |
| if (dev_WARN_ONCE(dev, !is_cxl_pmem_region(dev), |
| "not a cxl_pmem_region device\n")) |
| return NULL; |
| return container_of(dev, struct cxl_pmem_region, dev); |
| } |
| EXPORT_SYMBOL_NS_GPL(to_cxl_pmem_region, CXL); |
| |
| struct cxl_poison_context { |
| struct cxl_port *port; |
| enum cxl_decoder_mode mode; |
| u64 offset; |
| }; |
| |
| static int cxl_get_poison_unmapped(struct cxl_memdev *cxlmd, |
| struct cxl_poison_context *ctx) |
| { |
| struct cxl_dev_state *cxlds = cxlmd->cxlds; |
| u64 offset, length; |
| int rc = 0; |
| |
| /* |
| * Collect poison for the remaining unmapped resources |
| * after poison is collected by committed endpoints. |
| * |
| * Knowing that PMEM must always follow RAM, get poison |
| * for unmapped resources based on the last decoder's mode: |
| * ram: scan remains of ram range, then any pmem range |
| * pmem: scan remains of pmem range |
| */ |
| |
| if (ctx->mode == CXL_DECODER_RAM) { |
| offset = ctx->offset; |
| length = resource_size(&cxlds->ram_res) - offset; |
| rc = cxl_mem_get_poison(cxlmd, offset, length, NULL); |
| if (rc == -EFAULT) |
| rc = 0; |
| if (rc) |
| return rc; |
| } |
| if (ctx->mode == CXL_DECODER_PMEM) { |
| offset = ctx->offset; |
| length = resource_size(&cxlds->dpa_res) - offset; |
| if (!length) |
| return 0; |
| } else if (resource_size(&cxlds->pmem_res)) { |
| offset = cxlds->pmem_res.start; |
| length = resource_size(&cxlds->pmem_res); |
| } else { |
| return 0; |
| } |
| |
| return cxl_mem_get_poison(cxlmd, offset, length, NULL); |
| } |
| |
| static int poison_by_decoder(struct device *dev, void *arg) |
| { |
| struct cxl_poison_context *ctx = arg; |
| struct cxl_endpoint_decoder *cxled; |
| struct cxl_memdev *cxlmd; |
| u64 offset, length; |
| int rc = 0; |
| |
| if (!is_endpoint_decoder(dev)) |
| return rc; |
| |
| cxled = to_cxl_endpoint_decoder(dev); |
| if (!cxled->dpa_res || !resource_size(cxled->dpa_res)) |
| return rc; |
| |
| /* |
| * Regions are only created with single mode decoders: pmem or ram. |
| * Linux does not support mixed mode decoders. This means that |
| * reading poison per endpoint decoder adheres to the requirement |
| * that poison reads of pmem and ram must be separated. |
| * CXL 3.0 Spec 8.2.9.8.4.1 |
| */ |
| if (cxled->mode == CXL_DECODER_MIXED) { |
| dev_dbg(dev, "poison list read unsupported in mixed mode\n"); |
| return rc; |
| } |
| |
| cxlmd = cxled_to_memdev(cxled); |
| if (cxled->skip) { |
| offset = cxled->dpa_res->start - cxled->skip; |
| length = cxled->skip; |
| rc = cxl_mem_get_poison(cxlmd, offset, length, NULL); |
| if (rc == -EFAULT && cxled->mode == CXL_DECODER_RAM) |
| rc = 0; |
| if (rc) |
| return rc; |
| } |
| |
| offset = cxled->dpa_res->start; |
| length = cxled->dpa_res->end - offset + 1; |
| rc = cxl_mem_get_poison(cxlmd, offset, length, cxled->cxld.region); |
| if (rc == -EFAULT && cxled->mode == CXL_DECODER_RAM) |
| rc = 0; |
| if (rc) |
| return rc; |
| |
| /* Iterate until commit_end is reached */ |
| if (cxled->cxld.id == ctx->port->commit_end) { |
| ctx->offset = cxled->dpa_res->end + 1; |
| ctx->mode = cxled->mode; |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| int cxl_get_poison_by_endpoint(struct cxl_port *port) |
| { |
| struct cxl_poison_context ctx; |
| int rc = 0; |
| |
| ctx = (struct cxl_poison_context) { |
| .port = port |
| }; |
| |
| rc = device_for_each_child(&port->dev, &ctx, poison_by_decoder); |
| if (rc == 1) |
| rc = cxl_get_poison_unmapped(to_cxl_memdev(port->uport_dev), |
| &ctx); |
| |
| return rc; |
| } |
| |
| struct cxl_dpa_to_region_context { |
| struct cxl_region *cxlr; |
| u64 dpa; |
| }; |
| |
| static int __cxl_dpa_to_region(struct device *dev, void *arg) |
| { |
| struct cxl_dpa_to_region_context *ctx = arg; |
| struct cxl_endpoint_decoder *cxled; |
| struct cxl_region *cxlr; |
| u64 dpa = ctx->dpa; |
| |
| if (!is_endpoint_decoder(dev)) |
| return 0; |
| |
| cxled = to_cxl_endpoint_decoder(dev); |
| if (!cxled || !cxled->dpa_res || !resource_size(cxled->dpa_res)) |
| return 0; |
| |
| if (dpa > cxled->dpa_res->end || dpa < cxled->dpa_res->start) |
| return 0; |
| |
| /* |
| * Stop the region search (return 1) when an endpoint mapping is |
| * found. The region may not be fully constructed so offering |
| * the cxlr in the context structure is not guaranteed. |
| */ |
| cxlr = cxled->cxld.region; |
| if (cxlr) |
| dev_dbg(dev, "dpa:0x%llx mapped in region:%s\n", dpa, |
| dev_name(&cxlr->dev)); |
| else |
| dev_dbg(dev, "dpa:0x%llx mapped in endpoint:%s\n", dpa, |
| dev_name(dev)); |
| |
| ctx->cxlr = cxlr; |
| |
| return 1; |
| } |
| |
| struct cxl_region *cxl_dpa_to_region(const struct cxl_memdev *cxlmd, u64 dpa) |
| { |
| struct cxl_dpa_to_region_context ctx; |
| struct cxl_port *port; |
| |
| ctx = (struct cxl_dpa_to_region_context) { |
| .dpa = dpa, |
| }; |
| port = cxlmd->endpoint; |
| if (port && is_cxl_endpoint(port) && cxl_num_decoders_committed(port)) |
| device_for_each_child(&port->dev, &ctx, __cxl_dpa_to_region); |
| |
| return ctx.cxlr; |
| } |
| |
| static bool cxl_is_hpa_in_chunk(u64 hpa, struct cxl_region *cxlr, int pos) |
| { |
| struct cxl_region_params *p = &cxlr->params; |
| int gran = p->interleave_granularity; |
| int ways = p->interleave_ways; |
| u64 offset; |
| |
| /* Is the hpa in an expected chunk for its pos(-ition) */ |
| offset = hpa - p->res->start; |
| offset = do_div(offset, gran * ways); |
| if ((offset >= pos * gran) && (offset < (pos + 1) * gran)) |
| return true; |
| |
| dev_dbg(&cxlr->dev, |
| "Addr trans fail: hpa 0x%llx not in expected chunk\n", hpa); |
| |
| return false; |
| } |
| |
| u64 cxl_dpa_to_hpa(struct cxl_region *cxlr, const struct cxl_memdev *cxlmd, |
| u64 dpa) |
| { |
| struct cxl_root_decoder *cxlrd = to_cxl_root_decoder(cxlr->dev.parent); |
| u64 dpa_offset, hpa_offset, bits_upper, mask_upper, hpa; |
| struct cxl_region_params *p = &cxlr->params; |
| struct cxl_endpoint_decoder *cxled = NULL; |
| u16 eig = 0; |
| u8 eiw = 0; |
| int pos; |
| |
| for (int i = 0; i < p->nr_targets; i++) { |
| cxled = p->targets[i]; |
| if (cxlmd == cxled_to_memdev(cxled)) |
| break; |
| } |
| if (!cxled || cxlmd != cxled_to_memdev(cxled)) |
| return ULLONG_MAX; |
| |
| pos = cxled->pos; |
| ways_to_eiw(p->interleave_ways, &eiw); |
| granularity_to_eig(p->interleave_granularity, &eig); |
| |
| /* |
| * The device position in the region interleave set was removed |
| * from the offset at HPA->DPA translation. To reconstruct the |
| * HPA, place the 'pos' in the offset. |
| * |
| * The placement of 'pos' in the HPA is determined by interleave |
| * ways and granularity and is defined in the CXL Spec 3.0 Section |
| * 8.2.4.19.13 Implementation Note: Device Decode Logic |
| */ |
| |
| /* Remove the dpa base */ |
| dpa_offset = dpa - cxl_dpa_resource_start(cxled); |
| |
| mask_upper = GENMASK_ULL(51, eig + 8); |
| |
| if (eiw < 8) { |
| hpa_offset = (dpa_offset & mask_upper) << eiw; |
| hpa_offset |= pos << (eig + 8); |
| } else { |
| bits_upper = (dpa_offset & mask_upper) >> (eig + 8); |
| bits_upper = bits_upper * 3; |
| hpa_offset = ((bits_upper << (eiw - 8)) + pos) << (eig + 8); |
| } |
| |
| /* The lower bits remain unchanged */ |
| hpa_offset |= dpa_offset & GENMASK_ULL(eig + 7, 0); |
| |
| /* Apply the hpa_offset to the region base address */ |
| hpa = hpa_offset + p->res->start; |
| |
| /* Root decoder translation overrides typical modulo decode */ |
| if (cxlrd->hpa_to_spa) |
| hpa = cxlrd->hpa_to_spa(cxlrd, hpa); |
| |
| if (hpa < p->res->start || hpa > p->res->end) { |
| dev_dbg(&cxlr->dev, |
| "Addr trans fail: hpa 0x%llx not in region\n", hpa); |
| return ULLONG_MAX; |
| } |
| |
| /* Simple chunk check, by pos & gran, only applies to modulo decodes */ |
| if (!cxlrd->hpa_to_spa && (!cxl_is_hpa_in_chunk(hpa, cxlr, pos))) |
| return ULLONG_MAX; |
| |
| return hpa; |
| } |
| |
| static struct lock_class_key cxl_pmem_region_key; |
| |
| static int cxl_pmem_region_alloc(struct cxl_region *cxlr) |
| { |
| struct cxl_region_params *p = &cxlr->params; |
| struct cxl_nvdimm_bridge *cxl_nvb; |
| struct device *dev; |
| int i; |
| |
| guard(rwsem_read)(&cxl_region_rwsem); |
| if (p->state != CXL_CONFIG_COMMIT) |
| return -ENXIO; |
| |
| struct cxl_pmem_region *cxlr_pmem __free(kfree) = |
| kzalloc(struct_size(cxlr_pmem, mapping, p->nr_targets), GFP_KERNEL); |
| if (!cxlr_pmem) |
| return -ENOMEM; |
| |
| cxlr_pmem->hpa_range.start = p->res->start; |
| cxlr_pmem->hpa_range.end = p->res->end; |
| |
| /* Snapshot the region configuration underneath the cxl_region_rwsem */ |
| cxlr_pmem->nr_mappings = p->nr_targets; |
| for (i = 0; i < p->nr_targets; i++) { |
| struct cxl_endpoint_decoder *cxled = p->targets[i]; |
| struct cxl_memdev *cxlmd = cxled_to_memdev(cxled); |
| struct cxl_pmem_region_mapping *m = &cxlr_pmem->mapping[i]; |
| |
| /* |
| * Regions never span CXL root devices, so by definition the |
| * bridge for one device is the same for all. |
| */ |
| if (i == 0) { |
| cxl_nvb = cxl_find_nvdimm_bridge(cxlmd->endpoint); |
| if (!cxl_nvb) |
| return -ENODEV; |
| cxlr->cxl_nvb = cxl_nvb; |
| } |
| m->cxlmd = cxlmd; |
| get_device(&cxlmd->dev); |
| m->start = cxled->dpa_res->start; |
| m->size = resource_size(cxled->dpa_res); |
| m->position = i; |
| } |
| |
| dev = &cxlr_pmem->dev; |
| device_initialize(dev); |
| lockdep_set_class(&dev->mutex, &cxl_pmem_region_key); |
| device_set_pm_not_required(dev); |
| dev->parent = &cxlr->dev; |
| dev->bus = &cxl_bus_type; |
| dev->type = &cxl_pmem_region_type; |
| cxlr_pmem->cxlr = cxlr; |
| cxlr->cxlr_pmem = no_free_ptr(cxlr_pmem); |
| |
| return 0; |
| } |
| |
| static void cxl_dax_region_release(struct device *dev) |
| { |
| struct cxl_dax_region *cxlr_dax = to_cxl_dax_region(dev); |
| |
| kfree(cxlr_dax); |
| } |
| |
| static const struct attribute_group *cxl_dax_region_attribute_groups[] = { |
| &cxl_base_attribute_group, |
| NULL, |
| }; |
| |
| const struct device_type cxl_dax_region_type = { |
| .name = "cxl_dax_region", |
| .release = cxl_dax_region_release, |
| .groups = cxl_dax_region_attribute_groups, |
| }; |
| |
| static bool is_cxl_dax_region(struct device *dev) |
| { |
| return dev->type == &cxl_dax_region_type; |
| } |
| |
| struct cxl_dax_region *to_cxl_dax_region(struct device *dev) |
| { |
| if (dev_WARN_ONCE(dev, !is_cxl_dax_region(dev), |
| "not a cxl_dax_region device\n")) |
| return NULL; |
| return container_of(dev, struct cxl_dax_region, dev); |
| } |
| EXPORT_SYMBOL_NS_GPL(to_cxl_dax_region, CXL); |
| |
| static struct lock_class_key cxl_dax_region_key; |
| |
| static struct cxl_dax_region *cxl_dax_region_alloc(struct cxl_region *cxlr) |
| { |
| struct cxl_region_params *p = &cxlr->params; |
| struct cxl_dax_region *cxlr_dax; |
| struct device *dev; |
| |
| down_read(&cxl_region_rwsem); |
| if (p->state != CXL_CONFIG_COMMIT) { |
| cxlr_dax = ERR_PTR(-ENXIO); |
| goto out; |
| } |
| |
| cxlr_dax = kzalloc(sizeof(*cxlr_dax), GFP_KERNEL); |
| if (!cxlr_dax) { |
| cxlr_dax = ERR_PTR(-ENOMEM); |
| goto out; |
| } |
| |
| cxlr_dax->hpa_range.start = p->res->start; |
| cxlr_dax->hpa_range.end = p->res->end; |
| |
| dev = &cxlr_dax->dev; |
| cxlr_dax->cxlr = cxlr; |
| device_initialize(dev); |
| lockdep_set_class(&dev->mutex, &cxl_dax_region_key); |
| device_set_pm_not_required(dev); |
| dev->parent = &cxlr->dev; |
| dev->bus = &cxl_bus_type; |
| dev->type = &cxl_dax_region_type; |
| out: |
| up_read(&cxl_region_rwsem); |
| |
| return cxlr_dax; |
| } |
| |
| static void cxlr_pmem_unregister(void *_cxlr_pmem) |
| { |
| struct cxl_pmem_region *cxlr_pmem = _cxlr_pmem; |
| struct cxl_region *cxlr = cxlr_pmem->cxlr; |
| struct cxl_nvdimm_bridge *cxl_nvb = cxlr->cxl_nvb; |
| |
| /* |
| * Either the bridge is in ->remove() context under the device_lock(), |
| * or cxlr_release_nvdimm() is cancelling the bridge's release action |
| * for @cxlr_pmem and doing it itself (while manually holding the bridge |
| * lock). |
| */ |
| device_lock_assert(&cxl_nvb->dev); |
| cxlr->cxlr_pmem = NULL; |
| cxlr_pmem->cxlr = NULL; |
| device_unregister(&cxlr_pmem->dev); |
| } |
| |
| static void cxlr_release_nvdimm(void *_cxlr) |
| { |
| struct cxl_region *cxlr = _cxlr; |
| struct cxl_nvdimm_bridge *cxl_nvb = cxlr->cxl_nvb; |
| |
| device_lock(&cxl_nvb->dev); |
| if (cxlr->cxlr_pmem) |
| devm_release_action(&cxl_nvb->dev, cxlr_pmem_unregister, |
| cxlr->cxlr_pmem); |
| device_unlock(&cxl_nvb->dev); |
| cxlr->cxl_nvb = NULL; |
| put_device(&cxl_nvb->dev); |
| } |
| |
| /** |
| * devm_cxl_add_pmem_region() - add a cxl_region-to-nd_region bridge |
| * @cxlr: parent CXL region for this pmem region bridge device |
| * |
| * Return: 0 on success negative error code on failure. |
| */ |
| static int devm_cxl_add_pmem_region(struct cxl_region *cxlr) |
| { |
| struct cxl_pmem_region *cxlr_pmem; |
| struct cxl_nvdimm_bridge *cxl_nvb; |
| struct device *dev; |
| int rc; |
| |
| rc = cxl_pmem_region_alloc(cxlr); |
| if (rc) |
| return rc; |
| cxlr_pmem = cxlr->cxlr_pmem; |
| cxl_nvb = cxlr->cxl_nvb; |
| |
| dev = &cxlr_pmem->dev; |
| rc = dev_set_name(dev, "pmem_region%d", cxlr->id); |
| if (rc) |
| goto err; |
| |
| rc = device_add(dev); |
| if (rc) |
| goto err; |
| |
| dev_dbg(&cxlr->dev, "%s: register %s\n", dev_name(dev->parent), |
| dev_name(dev)); |
| |
| device_lock(&cxl_nvb->dev); |
| if (cxl_nvb->dev.driver) |
| rc = devm_add_action_or_reset(&cxl_nvb->dev, |
| cxlr_pmem_unregister, cxlr_pmem); |
| else |
| rc = -ENXIO; |
| device_unlock(&cxl_nvb->dev); |
| |
| if (rc) |
| goto err_bridge; |
| |
| /* @cxlr carries a reference on @cxl_nvb until cxlr_release_nvdimm */ |
| return devm_add_action_or_reset(&cxlr->dev, cxlr_release_nvdimm, cxlr); |
| |
| err: |
| put_device(dev); |
| err_bridge: |
| put_device(&cxl_nvb->dev); |
| cxlr->cxl_nvb = NULL; |
| return rc; |
| } |
| |
| static void cxlr_dax_unregister(void *_cxlr_dax) |
| { |
| struct cxl_dax_region *cxlr_dax = _cxlr_dax; |
| |
| device_unregister(&cxlr_dax->dev); |
| } |
| |
| static int devm_cxl_add_dax_region(struct cxl_region *cxlr) |
| { |
| struct cxl_dax_region *cxlr_dax; |
| struct device *dev; |
| int rc; |
| |
| cxlr_dax = cxl_dax_region_alloc(cxlr); |
| if (IS_ERR(cxlr_dax)) |
| return PTR_ERR(cxlr_dax); |
| |
| dev = &cxlr_dax->dev; |
| rc = dev_set_name(dev, "dax_region%d", cxlr->id); |
| if (rc) |
| goto err; |
| |
| rc = device_add(dev); |
| if (rc) |
| goto err; |
| |
| dev_dbg(&cxlr->dev, "%s: register %s\n", dev_name(dev->parent), |
| dev_name(dev)); |
| |
| return devm_add_action_or_reset(&cxlr->dev, cxlr_dax_unregister, |
| cxlr_dax); |
| err: |
| put_device(dev); |
| return rc; |
| } |
| |
| static int match_root_decoder_by_range(struct device *dev, void *data) |
| { |
| struct range *r1, *r2 = data; |
| struct cxl_root_decoder *cxlrd; |
| |
| if (!is_root_decoder(dev)) |
| return 0; |
| |
| cxlrd = to_cxl_root_decoder(dev); |
| r1 = &cxlrd->cxlsd.cxld.hpa_range; |
| return range_contains(r1, r2); |
| } |
| |
| static int match_region_by_range(struct device *dev, void *data) |
| { |
| struct cxl_region_params *p; |
| struct cxl_region *cxlr; |
| struct range *r = data; |
| int rc = 0; |
| |
| if (!is_cxl_region(dev)) |
| return 0; |
| |
| cxlr = to_cxl_region(dev); |
| p = &cxlr->params; |
| |
| down_read(&cxl_region_rwsem); |
| if (p->res && p->res->start == r->start && p->res->end == r->end) |
| rc = 1; |
| up_read(&cxl_region_rwsem); |
| |
| return rc; |
| } |
| |
| /* Establish an empty region covering the given HPA range */ |
| static struct cxl_region *construct_region(struct cxl_root_decoder *cxlrd, |
| struct cxl_endpoint_decoder *cxled) |
| { |
| struct cxl_memdev *cxlmd = cxled_to_memdev(cxled); |
| struct cxl_port *port = cxlrd_to_port(cxlrd); |
| struct range *hpa = &cxled->cxld.hpa_range; |
| struct cxl_region_params *p; |
| struct cxl_region *cxlr; |
| struct resource *res; |
| int rc; |
| |
| do { |
| cxlr = __create_region(cxlrd, cxled->mode, |
| atomic_read(&cxlrd->region_id)); |
| } while (IS_ERR(cxlr) && PTR_ERR(cxlr) == -EBUSY); |
| |
| if (IS_ERR(cxlr)) { |
| dev_err(cxlmd->dev.parent, |
| "%s:%s: %s failed assign region: %ld\n", |
| dev_name(&cxlmd->dev), dev_name(&cxled->cxld.dev), |
| __func__, PTR_ERR(cxlr)); |
| return cxlr; |
| } |
| |
| down_write(&cxl_region_rwsem); |
| p = &cxlr->params; |
| if (p->state >= CXL_CONFIG_INTERLEAVE_ACTIVE) { |
| dev_err(cxlmd->dev.parent, |
| "%s:%s: %s autodiscovery interrupted\n", |
| dev_name(&cxlmd->dev), dev_name(&cxled->cxld.dev), |
| __func__); |
| rc = -EBUSY; |
| goto err; |
| } |
| |
| set_bit(CXL_REGION_F_AUTO, &cxlr->flags); |
| |
| res = kmalloc(sizeof(*res), GFP_KERNEL); |
| if (!res) { |
| rc = -ENOMEM; |
| goto err; |
| } |
| |
| *res = DEFINE_RES_MEM_NAMED(hpa->start, range_len(hpa), |
| dev_name(&cxlr->dev)); |
| rc = insert_resource(cxlrd->res, res); |
| if (rc) { |
| /* |
| * Platform-firmware may not have split resources like "System |
| * RAM" on CXL window boundaries see cxl_region_iomem_release() |
| */ |
| dev_warn(cxlmd->dev.parent, |
| "%s:%s: %s %s cannot insert resource\n", |
| dev_name(&cxlmd->dev), dev_name(&cxled->cxld.dev), |
| __func__, dev_name(&cxlr->dev)); |
| } |
| |
| p->res = res; |
| p->interleave_ways = cxled->cxld.interleave_ways; |
| p->interleave_granularity = cxled->cxld.interleave_granularity; |
| p->state = CXL_CONFIG_INTERLEAVE_ACTIVE; |
| |
| rc = sysfs_update_group(&cxlr->dev.kobj, get_cxl_region_target_group()); |
| if (rc) |
| goto err; |
| |
| dev_dbg(cxlmd->dev.parent, "%s:%s: %s %s res: %pr iw: %d ig: %d\n", |
| dev_name(&cxlmd->dev), dev_name(&cxled->cxld.dev), __func__, |
| dev_name(&cxlr->dev), p->res, p->interleave_ways, |
| p->interleave_granularity); |
| |
| /* ...to match put_device() in cxl_add_to_region() */ |
| get_device(&cxlr->dev); |
| up_write(&cxl_region_rwsem); |
| |
| return cxlr; |
| |
| err: |
| up_write(&cxl_region_rwsem); |
| devm_release_action(port->uport_dev, unregister_region, cxlr); |
| return ERR_PTR(rc); |
| } |
| |
| int cxl_add_to_region(struct cxl_port *root, struct cxl_endpoint_decoder *cxled) |
| { |
| struct cxl_memdev *cxlmd = cxled_to_memdev(cxled); |
| struct range *hpa = &cxled->cxld.hpa_range; |
| struct cxl_decoder *cxld = &cxled->cxld; |
| struct device *cxlrd_dev, *region_dev; |
| struct cxl_root_decoder *cxlrd; |
| struct cxl_region_params *p; |
| struct cxl_region *cxlr; |
| bool attach = false; |
| int rc; |
| |
| cxlrd_dev = device_find_child(&root->dev, &cxld->hpa_range, |
| match_root_decoder_by_range); |
| if (!cxlrd_dev) { |
| dev_err(cxlmd->dev.parent, |
| "%s:%s no CXL window for range %#llx:%#llx\n", |
| dev_name(&cxlmd->dev), dev_name(&cxld->dev), |
| cxld->hpa_range.start, cxld->hpa_range.end); |
| return -ENXIO; |
| } |
| |
| cxlrd = to_cxl_root_decoder(cxlrd_dev); |
| |
| /* |
| * Ensure that if multiple threads race to construct_region() for @hpa |
| * one does the construction and the others add to that. |
| */ |
| mutex_lock(&cxlrd->range_lock); |
| region_dev = device_find_child(&cxlrd->cxlsd.cxld.dev, hpa, |
| match_region_by_range); |
| if (!region_dev) { |
| cxlr = construct_region(cxlrd, cxled); |
| region_dev = &cxlr->dev; |
| } else |
| cxlr = to_cxl_region(region_dev); |
| mutex_unlock(&cxlrd->range_lock); |
| |
| rc = PTR_ERR_OR_ZERO(cxlr); |
| if (rc) |
| goto out; |
| |
| attach_target(cxlr, cxled, -1, TASK_UNINTERRUPTIBLE); |
| |
| down_read(&cxl_region_rwsem); |
| p = &cxlr->params; |
| attach = p->state == CXL_CONFIG_COMMIT; |
| up_read(&cxl_region_rwsem); |
| |
| if (attach) { |
| /* |
| * If device_attach() fails the range may still be active via |
| * the platform-firmware memory map, otherwise the driver for |
| * regions is local to this file, so driver matching can't fail. |
| */ |
| if (device_attach(&cxlr->dev) < 0) |
| dev_err(&cxlr->dev, "failed to enable, range: %pr\n", |
| p->res); |
| } |
| |
| put_device(region_dev); |
| out: |
| put_device(cxlrd_dev); |
| return rc; |
| } |
| EXPORT_SYMBOL_NS_GPL(cxl_add_to_region, CXL); |
| |
| static int is_system_ram(struct resource *res, void *arg) |
| { |
| struct cxl_region *cxlr = arg; |
| struct cxl_region_params *p = &cxlr->params; |
| |
| dev_dbg(&cxlr->dev, "%pr has System RAM: %pr\n", p->res, res); |
| return 1; |
| } |
| |
| static int cxl_region_probe(struct device *dev) |
| { |
| struct cxl_region *cxlr = to_cxl_region(dev); |
| struct cxl_region_params *p = &cxlr->params; |
| int rc; |
| |
| rc = down_read_interruptible(&cxl_region_rwsem); |
| if (rc) { |
| dev_dbg(&cxlr->dev, "probe interrupted\n"); |
| return rc; |
| } |
| |
| if (p->state < CXL_CONFIG_COMMIT) { |
| dev_dbg(&cxlr->dev, "config state: %d\n", p->state); |
| rc = -ENXIO; |
| goto out; |
| } |
| |
| if (test_bit(CXL_REGION_F_NEEDS_RESET, &cxlr->flags)) { |
| dev_err(&cxlr->dev, |
| "failed to activate, re-commit region and retry\n"); |
| rc = -ENXIO; |
| goto out; |
| } |
| |
| /* |
| * From this point on any path that changes the region's state away from |
| * CXL_CONFIG_COMMIT is also responsible for releasing the driver. |
| */ |
| out: |
| up_read(&cxl_region_rwsem); |
| |
| if (rc) |
| return rc; |
| |
| switch (cxlr->mode) { |
| case CXL_DECODER_PMEM: |
| return devm_cxl_add_pmem_region(cxlr); |
| case CXL_DECODER_RAM: |
| /* |
| * The region can not be manged by CXL if any portion of |
| * it is already online as 'System RAM' |
| */ |
| if (walk_iomem_res_desc(IORES_DESC_NONE, |
| IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY, |
| p->res->start, p->res->end, cxlr, |
| is_system_ram) > 0) |
| return 0; |
| return devm_cxl_add_dax_region(cxlr); |
| default: |
| dev_dbg(&cxlr->dev, "unsupported region mode: %d\n", |
| cxlr->mode); |
| return -ENXIO; |
| } |
| } |
| |
| static struct cxl_driver cxl_region_driver = { |
| .name = "cxl_region", |
| .probe = cxl_region_probe, |
| .id = CXL_DEVICE_REGION, |
| }; |
| |
| int cxl_region_init(void) |
| { |
| return cxl_driver_register(&cxl_region_driver); |
| } |
| |
| void cxl_region_exit(void) |
| { |
| cxl_driver_unregister(&cxl_region_driver); |
| } |
| |
| MODULE_IMPORT_NS(CXL); |
| MODULE_IMPORT_NS(DEVMEM); |
| MODULE_ALIAS_CXL(CXL_DEVICE_REGION); |