| // SPDX-License-Identifier: GPL-2.0+ |
| // |
| // Copyright 2013 Freescale Semiconductor, Inc. |
| // |
| // Freescale DSPI driver |
| // This file contains a driver for the Freescale DSPI |
| |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/dmaengine.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/of_device.h> |
| #include <linux/pinctrl/consumer.h> |
| #include <linux/regmap.h> |
| #include <linux/spi/spi.h> |
| #include <linux/spi/spi-fsl-dspi.h> |
| |
| #define DRIVER_NAME "fsl-dspi" |
| |
| #ifdef CONFIG_M5441x |
| #define DSPI_FIFO_SIZE 16 |
| #else |
| #define DSPI_FIFO_SIZE 4 |
| #endif |
| #define DSPI_DMA_BUFSIZE (DSPI_FIFO_SIZE * 1024) |
| |
| #define SPI_MCR 0x00 |
| #define SPI_MCR_MASTER BIT(31) |
| #define SPI_MCR_PCSIS (0x3F << 16) |
| #define SPI_MCR_CLR_TXF BIT(11) |
| #define SPI_MCR_CLR_RXF BIT(10) |
| #define SPI_MCR_XSPI BIT(3) |
| |
| #define SPI_TCR 0x08 |
| #define SPI_TCR_GET_TCNT(x) (((x) & GENMASK(31, 16)) >> 16) |
| |
| #define SPI_CTAR(x) (0x0c + (((x) & GENMASK(1, 0)) * 4)) |
| #define SPI_CTAR_FMSZ(x) (((x) << 27) & GENMASK(30, 27)) |
| #define SPI_CTAR_CPOL BIT(26) |
| #define SPI_CTAR_CPHA BIT(25) |
| #define SPI_CTAR_LSBFE BIT(24) |
| #define SPI_CTAR_PCSSCK(x) (((x) << 22) & GENMASK(23, 22)) |
| #define SPI_CTAR_PASC(x) (((x) << 20) & GENMASK(21, 20)) |
| #define SPI_CTAR_PDT(x) (((x) << 18) & GENMASK(19, 18)) |
| #define SPI_CTAR_PBR(x) (((x) << 16) & GENMASK(17, 16)) |
| #define SPI_CTAR_CSSCK(x) (((x) << 12) & GENMASK(15, 12)) |
| #define SPI_CTAR_ASC(x) (((x) << 8) & GENMASK(11, 8)) |
| #define SPI_CTAR_DT(x) (((x) << 4) & GENMASK(7, 4)) |
| #define SPI_CTAR_BR(x) ((x) & GENMASK(3, 0)) |
| #define SPI_CTAR_SCALE_BITS 0xf |
| |
| #define SPI_CTAR0_SLAVE 0x0c |
| |
| #define SPI_SR 0x2c |
| #define SPI_SR_TCFQF BIT(31) |
| #define SPI_SR_EOQF BIT(28) |
| #define SPI_SR_TFUF BIT(27) |
| #define SPI_SR_TFFF BIT(25) |
| #define SPI_SR_CMDTCF BIT(23) |
| #define SPI_SR_SPEF BIT(21) |
| #define SPI_SR_RFOF BIT(19) |
| #define SPI_SR_TFIWF BIT(18) |
| #define SPI_SR_RFDF BIT(17) |
| #define SPI_SR_CMDFFF BIT(16) |
| #define SPI_SR_CLEAR (SPI_SR_TCFQF | SPI_SR_EOQF | \ |
| SPI_SR_TFUF | SPI_SR_TFFF | \ |
| SPI_SR_CMDTCF | SPI_SR_SPEF | \ |
| SPI_SR_RFOF | SPI_SR_TFIWF | \ |
| SPI_SR_RFDF | SPI_SR_CMDFFF) |
| |
| #define SPI_RSER_TFFFE BIT(25) |
| #define SPI_RSER_TFFFD BIT(24) |
| #define SPI_RSER_RFDFE BIT(17) |
| #define SPI_RSER_RFDFD BIT(16) |
| |
| #define SPI_RSER 0x30 |
| #define SPI_RSER_TCFQE BIT(31) |
| #define SPI_RSER_EOQFE BIT(28) |
| |
| #define SPI_PUSHR 0x34 |
| #define SPI_PUSHR_CMD_CONT BIT(15) |
| #define SPI_PUSHR_CMD_CTAS(x) (((x) << 12 & GENMASK(14, 12))) |
| #define SPI_PUSHR_CMD_EOQ BIT(11) |
| #define SPI_PUSHR_CMD_CTCNT BIT(10) |
| #define SPI_PUSHR_CMD_PCS(x) (BIT(x) & GENMASK(5, 0)) |
| |
| #define SPI_PUSHR_SLAVE 0x34 |
| |
| #define SPI_POPR 0x38 |
| |
| #define SPI_TXFR0 0x3c |
| #define SPI_TXFR1 0x40 |
| #define SPI_TXFR2 0x44 |
| #define SPI_TXFR3 0x48 |
| #define SPI_RXFR0 0x7c |
| #define SPI_RXFR1 0x80 |
| #define SPI_RXFR2 0x84 |
| #define SPI_RXFR3 0x88 |
| |
| #define SPI_CTARE(x) (0x11c + (((x) & GENMASK(1, 0)) * 4)) |
| #define SPI_CTARE_FMSZE(x) (((x) & 0x1) << 16) |
| #define SPI_CTARE_DTCP(x) ((x) & 0x7ff) |
| |
| #define SPI_SREX 0x13c |
| |
| #define SPI_FRAME_BITS(bits) SPI_CTAR_FMSZ((bits) - 1) |
| #define SPI_FRAME_EBITS(bits) SPI_CTARE_FMSZE(((bits) - 1) >> 4) |
| |
| /* Register offsets for regmap_pushr */ |
| #define PUSHR_CMD 0x0 |
| #define PUSHR_TX 0x2 |
| |
| #define DMA_COMPLETION_TIMEOUT msecs_to_jiffies(3000) |
| |
| struct chip_data { |
| u32 ctar_val; |
| u16 void_write_data; |
| }; |
| |
| enum dspi_trans_mode { |
| DSPI_EOQ_MODE = 0, |
| DSPI_TCFQ_MODE, |
| DSPI_DMA_MODE, |
| }; |
| |
| struct fsl_dspi_devtype_data { |
| enum dspi_trans_mode trans_mode; |
| u8 max_clock_factor; |
| bool xspi_mode; |
| }; |
| |
| static const struct fsl_dspi_devtype_data vf610_data = { |
| .trans_mode = DSPI_DMA_MODE, |
| .max_clock_factor = 2, |
| }; |
| |
| static const struct fsl_dspi_devtype_data ls1021a_v1_data = { |
| .trans_mode = DSPI_TCFQ_MODE, |
| .max_clock_factor = 8, |
| .xspi_mode = true, |
| }; |
| |
| static const struct fsl_dspi_devtype_data ls2085a_data = { |
| .trans_mode = DSPI_TCFQ_MODE, |
| .max_clock_factor = 8, |
| }; |
| |
| static const struct fsl_dspi_devtype_data coldfire_data = { |
| .trans_mode = DSPI_EOQ_MODE, |
| .max_clock_factor = 8, |
| }; |
| |
| struct fsl_dspi_dma { |
| /* Length of transfer in words of DSPI_FIFO_SIZE */ |
| u32 curr_xfer_len; |
| |
| u32 *tx_dma_buf; |
| struct dma_chan *chan_tx; |
| dma_addr_t tx_dma_phys; |
| struct completion cmd_tx_complete; |
| struct dma_async_tx_descriptor *tx_desc; |
| |
| u32 *rx_dma_buf; |
| struct dma_chan *chan_rx; |
| dma_addr_t rx_dma_phys; |
| struct completion cmd_rx_complete; |
| struct dma_async_tx_descriptor *rx_desc; |
| }; |
| |
| struct fsl_dspi { |
| struct spi_controller *ctlr; |
| struct platform_device *pdev; |
| |
| struct regmap *regmap; |
| struct regmap *regmap_pushr; |
| int irq; |
| struct clk *clk; |
| |
| struct spi_transfer *cur_transfer; |
| struct spi_message *cur_msg; |
| struct chip_data *cur_chip; |
| size_t len; |
| const void *tx; |
| void *rx; |
| void *rx_end; |
| u16 void_write_data; |
| u16 tx_cmd; |
| u8 bits_per_word; |
| u8 bytes_per_word; |
| const struct fsl_dspi_devtype_data *devtype_data; |
| |
| wait_queue_head_t waitq; |
| u32 waitflags; |
| |
| struct fsl_dspi_dma *dma; |
| }; |
| |
| static u32 dspi_pop_tx(struct fsl_dspi *dspi) |
| { |
| u32 txdata = 0; |
| |
| if (dspi->tx) { |
| if (dspi->bytes_per_word == 1) |
| txdata = *(u8 *)dspi->tx; |
| else if (dspi->bytes_per_word == 2) |
| txdata = *(u16 *)dspi->tx; |
| else /* dspi->bytes_per_word == 4 */ |
| txdata = *(u32 *)dspi->tx; |
| dspi->tx += dspi->bytes_per_word; |
| } |
| dspi->len -= dspi->bytes_per_word; |
| return txdata; |
| } |
| |
| static u32 dspi_pop_tx_pushr(struct fsl_dspi *dspi) |
| { |
| u16 cmd = dspi->tx_cmd, data = dspi_pop_tx(dspi); |
| |
| if (spi_controller_is_slave(dspi->ctlr)) |
| return data; |
| |
| if (dspi->len > 0) |
| cmd |= SPI_PUSHR_CMD_CONT; |
| return cmd << 16 | data; |
| } |
| |
| static void dspi_push_rx(struct fsl_dspi *dspi, u32 rxdata) |
| { |
| if (!dspi->rx) |
| return; |
| |
| /* Mask off undefined bits */ |
| rxdata &= (1 << dspi->bits_per_word) - 1; |
| |
| if (dspi->bytes_per_word == 1) |
| *(u8 *)dspi->rx = rxdata; |
| else if (dspi->bytes_per_word == 2) |
| *(u16 *)dspi->rx = rxdata; |
| else /* dspi->bytes_per_word == 4 */ |
| *(u32 *)dspi->rx = rxdata; |
| dspi->rx += dspi->bytes_per_word; |
| } |
| |
| static void dspi_tx_dma_callback(void *arg) |
| { |
| struct fsl_dspi *dspi = arg; |
| struct fsl_dspi_dma *dma = dspi->dma; |
| |
| complete(&dma->cmd_tx_complete); |
| } |
| |
| static void dspi_rx_dma_callback(void *arg) |
| { |
| struct fsl_dspi *dspi = arg; |
| struct fsl_dspi_dma *dma = dspi->dma; |
| int i; |
| |
| if (dspi->rx) { |
| for (i = 0; i < dma->curr_xfer_len; i++) |
| dspi_push_rx(dspi, dspi->dma->rx_dma_buf[i]); |
| } |
| |
| complete(&dma->cmd_rx_complete); |
| } |
| |
| static int dspi_next_xfer_dma_submit(struct fsl_dspi *dspi) |
| { |
| struct device *dev = &dspi->pdev->dev; |
| struct fsl_dspi_dma *dma = dspi->dma; |
| int time_left; |
| int i; |
| |
| for (i = 0; i < dma->curr_xfer_len; i++) |
| dspi->dma->tx_dma_buf[i] = dspi_pop_tx_pushr(dspi); |
| |
| dma->tx_desc = dmaengine_prep_slave_single(dma->chan_tx, |
| dma->tx_dma_phys, |
| dma->curr_xfer_len * |
| DMA_SLAVE_BUSWIDTH_4_BYTES, |
| DMA_MEM_TO_DEV, |
| DMA_PREP_INTERRUPT | DMA_CTRL_ACK); |
| if (!dma->tx_desc) { |
| dev_err(dev, "Not able to get desc for DMA xfer\n"); |
| return -EIO; |
| } |
| |
| dma->tx_desc->callback = dspi_tx_dma_callback; |
| dma->tx_desc->callback_param = dspi; |
| if (dma_submit_error(dmaengine_submit(dma->tx_desc))) { |
| dev_err(dev, "DMA submit failed\n"); |
| return -EINVAL; |
| } |
| |
| dma->rx_desc = dmaengine_prep_slave_single(dma->chan_rx, |
| dma->rx_dma_phys, |
| dma->curr_xfer_len * |
| DMA_SLAVE_BUSWIDTH_4_BYTES, |
| DMA_DEV_TO_MEM, |
| DMA_PREP_INTERRUPT | DMA_CTRL_ACK); |
| if (!dma->rx_desc) { |
| dev_err(dev, "Not able to get desc for DMA xfer\n"); |
| return -EIO; |
| } |
| |
| dma->rx_desc->callback = dspi_rx_dma_callback; |
| dma->rx_desc->callback_param = dspi; |
| if (dma_submit_error(dmaengine_submit(dma->rx_desc))) { |
| dev_err(dev, "DMA submit failed\n"); |
| return -EINVAL; |
| } |
| |
| reinit_completion(&dspi->dma->cmd_rx_complete); |
| reinit_completion(&dspi->dma->cmd_tx_complete); |
| |
| dma_async_issue_pending(dma->chan_rx); |
| dma_async_issue_pending(dma->chan_tx); |
| |
| if (spi_controller_is_slave(dspi->ctlr)) { |
| wait_for_completion_interruptible(&dspi->dma->cmd_rx_complete); |
| return 0; |
| } |
| |
| time_left = wait_for_completion_timeout(&dspi->dma->cmd_tx_complete, |
| DMA_COMPLETION_TIMEOUT); |
| if (time_left == 0) { |
| dev_err(dev, "DMA tx timeout\n"); |
| dmaengine_terminate_all(dma->chan_tx); |
| dmaengine_terminate_all(dma->chan_rx); |
| return -ETIMEDOUT; |
| } |
| |
| time_left = wait_for_completion_timeout(&dspi->dma->cmd_rx_complete, |
| DMA_COMPLETION_TIMEOUT); |
| if (time_left == 0) { |
| dev_err(dev, "DMA rx timeout\n"); |
| dmaengine_terminate_all(dma->chan_tx); |
| dmaengine_terminate_all(dma->chan_rx); |
| return -ETIMEDOUT; |
| } |
| |
| return 0; |
| } |
| |
| static int dspi_dma_xfer(struct fsl_dspi *dspi) |
| { |
| struct spi_message *message = dspi->cur_msg; |
| struct device *dev = &dspi->pdev->dev; |
| struct fsl_dspi_dma *dma = dspi->dma; |
| int curr_remaining_bytes; |
| int bytes_per_buffer; |
| int ret = 0; |
| |
| curr_remaining_bytes = dspi->len; |
| bytes_per_buffer = DSPI_DMA_BUFSIZE / DSPI_FIFO_SIZE; |
| while (curr_remaining_bytes) { |
| /* Check if current transfer fits the DMA buffer */ |
| dma->curr_xfer_len = curr_remaining_bytes |
| / dspi->bytes_per_word; |
| if (dma->curr_xfer_len > bytes_per_buffer) |
| dma->curr_xfer_len = bytes_per_buffer; |
| |
| ret = dspi_next_xfer_dma_submit(dspi); |
| if (ret) { |
| dev_err(dev, "DMA transfer failed\n"); |
| goto exit; |
| |
| } else { |
| const int len = |
| dma->curr_xfer_len * dspi->bytes_per_word; |
| curr_remaining_bytes -= len; |
| message->actual_length += len; |
| if (curr_remaining_bytes < 0) |
| curr_remaining_bytes = 0; |
| } |
| } |
| |
| exit: |
| return ret; |
| } |
| |
| static int dspi_request_dma(struct fsl_dspi *dspi, phys_addr_t phy_addr) |
| { |
| struct device *dev = &dspi->pdev->dev; |
| struct dma_slave_config cfg; |
| struct fsl_dspi_dma *dma; |
| int ret; |
| |
| dma = devm_kzalloc(dev, sizeof(*dma), GFP_KERNEL); |
| if (!dma) |
| return -ENOMEM; |
| |
| dma->chan_rx = dma_request_slave_channel(dev, "rx"); |
| if (!dma->chan_rx) { |
| dev_err(dev, "rx dma channel not available\n"); |
| ret = -ENODEV; |
| return ret; |
| } |
| |
| dma->chan_tx = dma_request_slave_channel(dev, "tx"); |
| if (!dma->chan_tx) { |
| dev_err(dev, "tx dma channel not available\n"); |
| ret = -ENODEV; |
| goto err_tx_channel; |
| } |
| |
| dma->tx_dma_buf = dma_alloc_coherent(dev, DSPI_DMA_BUFSIZE, |
| &dma->tx_dma_phys, GFP_KERNEL); |
| if (!dma->tx_dma_buf) { |
| ret = -ENOMEM; |
| goto err_tx_dma_buf; |
| } |
| |
| dma->rx_dma_buf = dma_alloc_coherent(dev, DSPI_DMA_BUFSIZE, |
| &dma->rx_dma_phys, GFP_KERNEL); |
| if (!dma->rx_dma_buf) { |
| ret = -ENOMEM; |
| goto err_rx_dma_buf; |
| } |
| |
| cfg.src_addr = phy_addr + SPI_POPR; |
| cfg.dst_addr = phy_addr + SPI_PUSHR; |
| cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; |
| cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; |
| cfg.src_maxburst = 1; |
| cfg.dst_maxburst = 1; |
| |
| cfg.direction = DMA_DEV_TO_MEM; |
| ret = dmaengine_slave_config(dma->chan_rx, &cfg); |
| if (ret) { |
| dev_err(dev, "can't configure rx dma channel\n"); |
| ret = -EINVAL; |
| goto err_slave_config; |
| } |
| |
| cfg.direction = DMA_MEM_TO_DEV; |
| ret = dmaengine_slave_config(dma->chan_tx, &cfg); |
| if (ret) { |
| dev_err(dev, "can't configure tx dma channel\n"); |
| ret = -EINVAL; |
| goto err_slave_config; |
| } |
| |
| dspi->dma = dma; |
| init_completion(&dma->cmd_tx_complete); |
| init_completion(&dma->cmd_rx_complete); |
| |
| return 0; |
| |
| err_slave_config: |
| dma_free_coherent(dev, DSPI_DMA_BUFSIZE, |
| dma->rx_dma_buf, dma->rx_dma_phys); |
| err_rx_dma_buf: |
| dma_free_coherent(dev, DSPI_DMA_BUFSIZE, |
| dma->tx_dma_buf, dma->tx_dma_phys); |
| err_tx_dma_buf: |
| dma_release_channel(dma->chan_tx); |
| err_tx_channel: |
| dma_release_channel(dma->chan_rx); |
| |
| devm_kfree(dev, dma); |
| dspi->dma = NULL; |
| |
| return ret; |
| } |
| |
| static void dspi_release_dma(struct fsl_dspi *dspi) |
| { |
| struct fsl_dspi_dma *dma = dspi->dma; |
| struct device *dev = &dspi->pdev->dev; |
| |
| if (!dma) |
| return; |
| |
| if (dma->chan_tx) { |
| dma_unmap_single(dev, dma->tx_dma_phys, |
| DSPI_DMA_BUFSIZE, DMA_TO_DEVICE); |
| dma_release_channel(dma->chan_tx); |
| } |
| |
| if (dma->chan_rx) { |
| dma_unmap_single(dev, dma->rx_dma_phys, |
| DSPI_DMA_BUFSIZE, DMA_FROM_DEVICE); |
| dma_release_channel(dma->chan_rx); |
| } |
| } |
| |
| static void hz_to_spi_baud(char *pbr, char *br, int speed_hz, |
| unsigned long clkrate) |
| { |
| /* Valid baud rate pre-scaler values */ |
| int pbr_tbl[4] = {2, 3, 5, 7}; |
| int brs[16] = { 2, 4, 6, 8, |
| 16, 32, 64, 128, |
| 256, 512, 1024, 2048, |
| 4096, 8192, 16384, 32768 }; |
| int scale_needed, scale, minscale = INT_MAX; |
| int i, j; |
| |
| scale_needed = clkrate / speed_hz; |
| if (clkrate % speed_hz) |
| scale_needed++; |
| |
| for (i = 0; i < ARRAY_SIZE(brs); i++) |
| for (j = 0; j < ARRAY_SIZE(pbr_tbl); j++) { |
| scale = brs[i] * pbr_tbl[j]; |
| if (scale >= scale_needed) { |
| if (scale < minscale) { |
| minscale = scale; |
| *br = i; |
| *pbr = j; |
| } |
| break; |
| } |
| } |
| |
| if (minscale == INT_MAX) { |
| pr_warn("Can not find valid baud rate,speed_hz is %d,clkrate is %ld, we use the max prescaler value.\n", |
| speed_hz, clkrate); |
| *pbr = ARRAY_SIZE(pbr_tbl) - 1; |
| *br = ARRAY_SIZE(brs) - 1; |
| } |
| } |
| |
| static void ns_delay_scale(char *psc, char *sc, int delay_ns, |
| unsigned long clkrate) |
| { |
| int scale_needed, scale, minscale = INT_MAX; |
| int pscale_tbl[4] = {1, 3, 5, 7}; |
| u32 remainder; |
| int i, j; |
| |
| scale_needed = div_u64_rem((u64)delay_ns * clkrate, NSEC_PER_SEC, |
| &remainder); |
| if (remainder) |
| scale_needed++; |
| |
| for (i = 0; i < ARRAY_SIZE(pscale_tbl); i++) |
| for (j = 0; j <= SPI_CTAR_SCALE_BITS; j++) { |
| scale = pscale_tbl[i] * (2 << j); |
| if (scale >= scale_needed) { |
| if (scale < minscale) { |
| minscale = scale; |
| *psc = i; |
| *sc = j; |
| } |
| break; |
| } |
| } |
| |
| if (minscale == INT_MAX) { |
| pr_warn("Cannot find correct scale values for %dns delay at clkrate %ld, using max prescaler value", |
| delay_ns, clkrate); |
| *psc = ARRAY_SIZE(pscale_tbl) - 1; |
| *sc = SPI_CTAR_SCALE_BITS; |
| } |
| } |
| |
| static void fifo_write(struct fsl_dspi *dspi) |
| { |
| regmap_write(dspi->regmap, SPI_PUSHR, dspi_pop_tx_pushr(dspi)); |
| } |
| |
| static void cmd_fifo_write(struct fsl_dspi *dspi) |
| { |
| u16 cmd = dspi->tx_cmd; |
| |
| if (dspi->len > 0) |
| cmd |= SPI_PUSHR_CMD_CONT; |
| regmap_write(dspi->regmap_pushr, PUSHR_CMD, cmd); |
| } |
| |
| static void tx_fifo_write(struct fsl_dspi *dspi, u16 txdata) |
| { |
| regmap_write(dspi->regmap_pushr, PUSHR_TX, txdata); |
| } |
| |
| static void dspi_tcfq_write(struct fsl_dspi *dspi) |
| { |
| /* Clear transfer count */ |
| dspi->tx_cmd |= SPI_PUSHR_CMD_CTCNT; |
| |
| if (dspi->devtype_data->xspi_mode && dspi->bits_per_word > 16) { |
| /* Write two TX FIFO entries first, and then the corresponding |
| * CMD FIFO entry. |
| */ |
| u32 data = dspi_pop_tx(dspi); |
| |
| if (dspi->cur_chip->ctar_val & SPI_CTAR_LSBFE) { |
| /* LSB */ |
| tx_fifo_write(dspi, data & 0xFFFF); |
| tx_fifo_write(dspi, data >> 16); |
| } else { |
| /* MSB */ |
| tx_fifo_write(dspi, data >> 16); |
| tx_fifo_write(dspi, data & 0xFFFF); |
| } |
| cmd_fifo_write(dspi); |
| } else { |
| /* Write one entry to both TX FIFO and CMD FIFO |
| * simultaneously. |
| */ |
| fifo_write(dspi); |
| } |
| } |
| |
| static u32 fifo_read(struct fsl_dspi *dspi) |
| { |
| u32 rxdata = 0; |
| |
| regmap_read(dspi->regmap, SPI_POPR, &rxdata); |
| return rxdata; |
| } |
| |
| static void dspi_tcfq_read(struct fsl_dspi *dspi) |
| { |
| dspi_push_rx(dspi, fifo_read(dspi)); |
| } |
| |
| static void dspi_eoq_write(struct fsl_dspi *dspi) |
| { |
| int fifo_size = DSPI_FIFO_SIZE; |
| u16 xfer_cmd = dspi->tx_cmd; |
| |
| /* Fill TX FIFO with as many transfers as possible */ |
| while (dspi->len && fifo_size--) { |
| dspi->tx_cmd = xfer_cmd; |
| /* Request EOQF for last transfer in FIFO */ |
| if (dspi->len == dspi->bytes_per_word || fifo_size == 0) |
| dspi->tx_cmd |= SPI_PUSHR_CMD_EOQ; |
| /* Clear transfer count for first transfer in FIFO */ |
| if (fifo_size == (DSPI_FIFO_SIZE - 1)) |
| dspi->tx_cmd |= SPI_PUSHR_CMD_CTCNT; |
| /* Write combined TX FIFO and CMD FIFO entry */ |
| fifo_write(dspi); |
| } |
| } |
| |
| static void dspi_eoq_read(struct fsl_dspi *dspi) |
| { |
| int fifo_size = DSPI_FIFO_SIZE; |
| |
| /* Read one FIFO entry and push to rx buffer */ |
| while ((dspi->rx < dspi->rx_end) && fifo_size--) |
| dspi_push_rx(dspi, fifo_read(dspi)); |
| } |
| |
| static int dspi_rxtx(struct fsl_dspi *dspi) |
| { |
| struct spi_message *msg = dspi->cur_msg; |
| enum dspi_trans_mode trans_mode; |
| u16 spi_tcnt; |
| u32 spi_tcr; |
| |
| /* Get transfer counter (in number of SPI transfers). It was |
| * reset to 0 when transfer(s) were started. |
| */ |
| regmap_read(dspi->regmap, SPI_TCR, &spi_tcr); |
| spi_tcnt = SPI_TCR_GET_TCNT(spi_tcr); |
| /* Update total number of bytes that were transferred */ |
| msg->actual_length += spi_tcnt * dspi->bytes_per_word; |
| |
| trans_mode = dspi->devtype_data->trans_mode; |
| if (trans_mode == DSPI_EOQ_MODE) |
| dspi_eoq_read(dspi); |
| else if (trans_mode == DSPI_TCFQ_MODE) |
| dspi_tcfq_read(dspi); |
| |
| if (!dspi->len) |
| /* Success! */ |
| return 0; |
| |
| if (trans_mode == DSPI_EOQ_MODE) |
| dspi_eoq_write(dspi); |
| else if (trans_mode == DSPI_TCFQ_MODE) |
| dspi_tcfq_write(dspi); |
| |
| return -EINPROGRESS; |
| } |
| |
| static int dspi_poll(struct fsl_dspi *dspi) |
| { |
| int tries = 1000; |
| u32 spi_sr; |
| |
| do { |
| regmap_read(dspi->regmap, SPI_SR, &spi_sr); |
| regmap_write(dspi->regmap, SPI_SR, spi_sr); |
| |
| if (spi_sr & (SPI_SR_EOQF | SPI_SR_TCFQF)) |
| break; |
| } while (--tries); |
| |
| if (!tries) |
| return -ETIMEDOUT; |
| |
| return dspi_rxtx(dspi); |
| } |
| |
| static irqreturn_t dspi_interrupt(int irq, void *dev_id) |
| { |
| struct fsl_dspi *dspi = (struct fsl_dspi *)dev_id; |
| u32 spi_sr; |
| |
| regmap_read(dspi->regmap, SPI_SR, &spi_sr); |
| regmap_write(dspi->regmap, SPI_SR, spi_sr); |
| |
| if (!(spi_sr & (SPI_SR_EOQF | SPI_SR_TCFQF))) |
| return IRQ_NONE; |
| |
| if (dspi_rxtx(dspi) == 0) { |
| dspi->waitflags = 1; |
| wake_up_interruptible(&dspi->waitq); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int dspi_transfer_one_message(struct spi_controller *ctlr, |
| struct spi_message *message) |
| { |
| struct fsl_dspi *dspi = spi_controller_get_devdata(ctlr); |
| struct spi_device *spi = message->spi; |
| enum dspi_trans_mode trans_mode; |
| struct spi_transfer *transfer; |
| int status = 0; |
| |
| message->actual_length = 0; |
| |
| list_for_each_entry(transfer, &message->transfers, transfer_list) { |
| dspi->cur_transfer = transfer; |
| dspi->cur_msg = message; |
| dspi->cur_chip = spi_get_ctldata(spi); |
| /* Prepare command word for CMD FIFO */ |
| dspi->tx_cmd = SPI_PUSHR_CMD_CTAS(0) | |
| SPI_PUSHR_CMD_PCS(spi->chip_select); |
| if (list_is_last(&dspi->cur_transfer->transfer_list, |
| &dspi->cur_msg->transfers)) { |
| /* Leave PCS activated after last transfer when |
| * cs_change is set. |
| */ |
| if (transfer->cs_change) |
| dspi->tx_cmd |= SPI_PUSHR_CMD_CONT; |
| } else { |
| /* Keep PCS active between transfers in same message |
| * when cs_change is not set, and de-activate PCS |
| * between transfers in the same message when |
| * cs_change is set. |
| */ |
| if (!transfer->cs_change) |
| dspi->tx_cmd |= SPI_PUSHR_CMD_CONT; |
| } |
| |
| dspi->void_write_data = dspi->cur_chip->void_write_data; |
| |
| dspi->tx = transfer->tx_buf; |
| dspi->rx = transfer->rx_buf; |
| dspi->rx_end = dspi->rx + transfer->len; |
| dspi->len = transfer->len; |
| /* Validated transfer specific frame size (defaults applied) */ |
| dspi->bits_per_word = transfer->bits_per_word; |
| if (transfer->bits_per_word <= 8) |
| dspi->bytes_per_word = 1; |
| else if (transfer->bits_per_word <= 16) |
| dspi->bytes_per_word = 2; |
| else |
| dspi->bytes_per_word = 4; |
| |
| regmap_update_bits(dspi->regmap, SPI_MCR, |
| SPI_MCR_CLR_TXF | SPI_MCR_CLR_RXF, |
| SPI_MCR_CLR_TXF | SPI_MCR_CLR_RXF); |
| regmap_write(dspi->regmap, SPI_CTAR(0), |
| dspi->cur_chip->ctar_val | |
| SPI_FRAME_BITS(transfer->bits_per_word)); |
| if (dspi->devtype_data->xspi_mode) |
| regmap_write(dspi->regmap, SPI_CTARE(0), |
| SPI_FRAME_EBITS(transfer->bits_per_word) | |
| SPI_CTARE_DTCP(1)); |
| |
| trans_mode = dspi->devtype_data->trans_mode; |
| switch (trans_mode) { |
| case DSPI_EOQ_MODE: |
| regmap_write(dspi->regmap, SPI_RSER, SPI_RSER_EOQFE); |
| dspi_eoq_write(dspi); |
| break; |
| case DSPI_TCFQ_MODE: |
| regmap_write(dspi->regmap, SPI_RSER, SPI_RSER_TCFQE); |
| dspi_tcfq_write(dspi); |
| break; |
| case DSPI_DMA_MODE: |
| regmap_write(dspi->regmap, SPI_RSER, |
| SPI_RSER_TFFFE | SPI_RSER_TFFFD | |
| SPI_RSER_RFDFE | SPI_RSER_RFDFD); |
| status = dspi_dma_xfer(dspi); |
| break; |
| default: |
| dev_err(&dspi->pdev->dev, "unsupported trans_mode %u\n", |
| trans_mode); |
| status = -EINVAL; |
| goto out; |
| } |
| |
| if (!dspi->irq) { |
| do { |
| status = dspi_poll(dspi); |
| } while (status == -EINPROGRESS); |
| } else if (trans_mode != DSPI_DMA_MODE) { |
| status = wait_event_interruptible(dspi->waitq, |
| dspi->waitflags); |
| dspi->waitflags = 0; |
| } |
| if (status) |
| dev_err(&dspi->pdev->dev, |
| "Waiting for transfer to complete failed!\n"); |
| |
| if (transfer->delay_usecs) |
| udelay(transfer->delay_usecs); |
| } |
| |
| out: |
| message->status = status; |
| spi_finalize_current_message(ctlr); |
| |
| return status; |
| } |
| |
| static int dspi_setup(struct spi_device *spi) |
| { |
| struct fsl_dspi *dspi = spi_controller_get_devdata(spi->controller); |
| unsigned char br = 0, pbr = 0, pcssck = 0, cssck = 0; |
| u32 cs_sck_delay = 0, sck_cs_delay = 0; |
| struct fsl_dspi_platform_data *pdata; |
| unsigned char pasc = 0, asc = 0; |
| struct chip_data *chip; |
| unsigned long clkrate; |
| |
| /* Only alloc on first setup */ |
| chip = spi_get_ctldata(spi); |
| if (chip == NULL) { |
| chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL); |
| if (!chip) |
| return -ENOMEM; |
| } |
| |
| pdata = dev_get_platdata(&dspi->pdev->dev); |
| |
| if (!pdata) { |
| of_property_read_u32(spi->dev.of_node, "fsl,spi-cs-sck-delay", |
| &cs_sck_delay); |
| |
| of_property_read_u32(spi->dev.of_node, "fsl,spi-sck-cs-delay", |
| &sck_cs_delay); |
| } else { |
| cs_sck_delay = pdata->cs_sck_delay; |
| sck_cs_delay = pdata->sck_cs_delay; |
| } |
| |
| chip->void_write_data = 0; |
| |
| clkrate = clk_get_rate(dspi->clk); |
| hz_to_spi_baud(&pbr, &br, spi->max_speed_hz, clkrate); |
| |
| /* Set PCS to SCK delay scale values */ |
| ns_delay_scale(&pcssck, &cssck, cs_sck_delay, clkrate); |
| |
| /* Set After SCK delay scale values */ |
| ns_delay_scale(&pasc, &asc, sck_cs_delay, clkrate); |
| |
| chip->ctar_val = 0; |
| if (spi->mode & SPI_CPOL) |
| chip->ctar_val |= SPI_CTAR_CPOL; |
| if (spi->mode & SPI_CPHA) |
| chip->ctar_val |= SPI_CTAR_CPHA; |
| |
| if (!spi_controller_is_slave(dspi->ctlr)) { |
| chip->ctar_val |= SPI_CTAR_PCSSCK(pcssck) | |
| SPI_CTAR_CSSCK(cssck) | |
| SPI_CTAR_PASC(pasc) | |
| SPI_CTAR_ASC(asc) | |
| SPI_CTAR_PBR(pbr) | |
| SPI_CTAR_BR(br); |
| |
| if (spi->mode & SPI_LSB_FIRST) |
| chip->ctar_val |= SPI_CTAR_LSBFE; |
| } |
| |
| spi_set_ctldata(spi, chip); |
| |
| return 0; |
| } |
| |
| static void dspi_cleanup(struct spi_device *spi) |
| { |
| struct chip_data *chip = spi_get_ctldata((struct spi_device *)spi); |
| |
| dev_dbg(&spi->dev, "spi_device %u.%u cleanup\n", |
| spi->controller->bus_num, spi->chip_select); |
| |
| kfree(chip); |
| } |
| |
| static const struct of_device_id fsl_dspi_dt_ids[] = { |
| { .compatible = "fsl,vf610-dspi", .data = &vf610_data, }, |
| { .compatible = "fsl,ls1021a-v1.0-dspi", .data = &ls1021a_v1_data, }, |
| { .compatible = "fsl,ls2085a-dspi", .data = &ls2085a_data, }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, fsl_dspi_dt_ids); |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int dspi_suspend(struct device *dev) |
| { |
| struct spi_controller *ctlr = dev_get_drvdata(dev); |
| struct fsl_dspi *dspi = spi_controller_get_devdata(ctlr); |
| |
| spi_controller_suspend(ctlr); |
| clk_disable_unprepare(dspi->clk); |
| |
| pinctrl_pm_select_sleep_state(dev); |
| |
| return 0; |
| } |
| |
| static int dspi_resume(struct device *dev) |
| { |
| struct spi_controller *ctlr = dev_get_drvdata(dev); |
| struct fsl_dspi *dspi = spi_controller_get_devdata(ctlr); |
| int ret; |
| |
| pinctrl_pm_select_default_state(dev); |
| |
| ret = clk_prepare_enable(dspi->clk); |
| if (ret) |
| return ret; |
| spi_controller_resume(ctlr); |
| |
| return 0; |
| } |
| #endif /* CONFIG_PM_SLEEP */ |
| |
| static SIMPLE_DEV_PM_OPS(dspi_pm, dspi_suspend, dspi_resume); |
| |
| static const struct regmap_range dspi_volatile_ranges[] = { |
| regmap_reg_range(SPI_MCR, SPI_TCR), |
| regmap_reg_range(SPI_SR, SPI_SR), |
| regmap_reg_range(SPI_PUSHR, SPI_RXFR3), |
| }; |
| |
| static const struct regmap_access_table dspi_volatile_table = { |
| .yes_ranges = dspi_volatile_ranges, |
| .n_yes_ranges = ARRAY_SIZE(dspi_volatile_ranges), |
| }; |
| |
| static const struct regmap_config dspi_regmap_config = { |
| .reg_bits = 32, |
| .val_bits = 32, |
| .reg_stride = 4, |
| .max_register = 0x88, |
| .volatile_table = &dspi_volatile_table, |
| }; |
| |
| static const struct regmap_range dspi_xspi_volatile_ranges[] = { |
| regmap_reg_range(SPI_MCR, SPI_TCR), |
| regmap_reg_range(SPI_SR, SPI_SR), |
| regmap_reg_range(SPI_PUSHR, SPI_RXFR3), |
| regmap_reg_range(SPI_SREX, SPI_SREX), |
| }; |
| |
| static const struct regmap_access_table dspi_xspi_volatile_table = { |
| .yes_ranges = dspi_xspi_volatile_ranges, |
| .n_yes_ranges = ARRAY_SIZE(dspi_xspi_volatile_ranges), |
| }; |
| |
| static const struct regmap_config dspi_xspi_regmap_config[] = { |
| { |
| .reg_bits = 32, |
| .val_bits = 32, |
| .reg_stride = 4, |
| .max_register = 0x13c, |
| .volatile_table = &dspi_xspi_volatile_table, |
| }, |
| { |
| .name = "pushr", |
| .reg_bits = 16, |
| .val_bits = 16, |
| .reg_stride = 2, |
| .max_register = 0x2, |
| }, |
| }; |
| |
| static void dspi_init(struct fsl_dspi *dspi) |
| { |
| unsigned int mcr = SPI_MCR_PCSIS; |
| |
| if (dspi->devtype_data->xspi_mode) |
| mcr |= SPI_MCR_XSPI; |
| if (!spi_controller_is_slave(dspi->ctlr)) |
| mcr |= SPI_MCR_MASTER; |
| |
| regmap_write(dspi->regmap, SPI_MCR, mcr); |
| regmap_write(dspi->regmap, SPI_SR, SPI_SR_CLEAR); |
| if (dspi->devtype_data->xspi_mode) |
| regmap_write(dspi->regmap, SPI_CTARE(0), |
| SPI_CTARE_FMSZE(0) | SPI_CTARE_DTCP(1)); |
| } |
| |
| static int dspi_probe(struct platform_device *pdev) |
| { |
| struct device_node *np = pdev->dev.of_node; |
| const struct regmap_config *regmap_config; |
| struct fsl_dspi_platform_data *pdata; |
| struct spi_controller *ctlr; |
| int ret, cs_num, bus_num; |
| struct fsl_dspi *dspi; |
| struct resource *res; |
| void __iomem *base; |
| |
| ctlr = spi_alloc_master(&pdev->dev, sizeof(struct fsl_dspi)); |
| if (!ctlr) |
| return -ENOMEM; |
| |
| dspi = spi_controller_get_devdata(ctlr); |
| dspi->pdev = pdev; |
| dspi->ctlr = ctlr; |
| |
| ctlr->setup = dspi_setup; |
| ctlr->transfer_one_message = dspi_transfer_one_message; |
| ctlr->dev.of_node = pdev->dev.of_node; |
| |
| ctlr->cleanup = dspi_cleanup; |
| ctlr->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST; |
| |
| pdata = dev_get_platdata(&pdev->dev); |
| if (pdata) { |
| ctlr->num_chipselect = pdata->cs_num; |
| ctlr->bus_num = pdata->bus_num; |
| |
| dspi->devtype_data = &coldfire_data; |
| } else { |
| |
| ret = of_property_read_u32(np, "spi-num-chipselects", &cs_num); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "can't get spi-num-chipselects\n"); |
| goto out_ctlr_put; |
| } |
| ctlr->num_chipselect = cs_num; |
| |
| ret = of_property_read_u32(np, "bus-num", &bus_num); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "can't get bus-num\n"); |
| goto out_ctlr_put; |
| } |
| ctlr->bus_num = bus_num; |
| |
| if (of_property_read_bool(np, "spi-slave")) |
| ctlr->slave = true; |
| |
| dspi->devtype_data = of_device_get_match_data(&pdev->dev); |
| if (!dspi->devtype_data) { |
| dev_err(&pdev->dev, "can't get devtype_data\n"); |
| ret = -EFAULT; |
| goto out_ctlr_put; |
| } |
| } |
| |
| if (dspi->devtype_data->xspi_mode) |
| ctlr->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32); |
| else |
| ctlr->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 16); |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| base = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(base)) { |
| ret = PTR_ERR(base); |
| goto out_ctlr_put; |
| } |
| |
| if (dspi->devtype_data->xspi_mode) |
| regmap_config = &dspi_xspi_regmap_config[0]; |
| else |
| regmap_config = &dspi_regmap_config; |
| dspi->regmap = devm_regmap_init_mmio(&pdev->dev, base, regmap_config); |
| if (IS_ERR(dspi->regmap)) { |
| dev_err(&pdev->dev, "failed to init regmap: %ld\n", |
| PTR_ERR(dspi->regmap)); |
| ret = PTR_ERR(dspi->regmap); |
| goto out_ctlr_put; |
| } |
| |
| if (dspi->devtype_data->xspi_mode) { |
| dspi->regmap_pushr = devm_regmap_init_mmio( |
| &pdev->dev, base + SPI_PUSHR, |
| &dspi_xspi_regmap_config[1]); |
| if (IS_ERR(dspi->regmap_pushr)) { |
| dev_err(&pdev->dev, |
| "failed to init pushr regmap: %ld\n", |
| PTR_ERR(dspi->regmap_pushr)); |
| ret = PTR_ERR(dspi->regmap_pushr); |
| goto out_ctlr_put; |
| } |
| } |
| |
| dspi->clk = devm_clk_get(&pdev->dev, "dspi"); |
| if (IS_ERR(dspi->clk)) { |
| ret = PTR_ERR(dspi->clk); |
| dev_err(&pdev->dev, "unable to get clock\n"); |
| goto out_ctlr_put; |
| } |
| ret = clk_prepare_enable(dspi->clk); |
| if (ret) |
| goto out_ctlr_put; |
| |
| dspi_init(dspi); |
| |
| dspi->irq = platform_get_irq(pdev, 0); |
| if (dspi->irq <= 0) { |
| dev_info(&pdev->dev, |
| "can't get platform irq, using poll mode\n"); |
| dspi->irq = 0; |
| goto poll_mode; |
| } |
| |
| ret = devm_request_irq(&pdev->dev, dspi->irq, dspi_interrupt, |
| IRQF_SHARED, pdev->name, dspi); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "Unable to attach DSPI interrupt\n"); |
| goto out_clk_put; |
| } |
| |
| init_waitqueue_head(&dspi->waitq); |
| |
| poll_mode: |
| if (dspi->devtype_data->trans_mode == DSPI_DMA_MODE) { |
| ret = dspi_request_dma(dspi, res->start); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "can't get dma channels\n"); |
| goto out_clk_put; |
| } |
| } |
| |
| ctlr->max_speed_hz = |
| clk_get_rate(dspi->clk) / dspi->devtype_data->max_clock_factor; |
| |
| platform_set_drvdata(pdev, ctlr); |
| |
| ret = spi_register_controller(ctlr); |
| if (ret != 0) { |
| dev_err(&pdev->dev, "Problem registering DSPI ctlr\n"); |
| goto out_clk_put; |
| } |
| |
| return ret; |
| |
| out_clk_put: |
| clk_disable_unprepare(dspi->clk); |
| out_ctlr_put: |
| spi_controller_put(ctlr); |
| |
| return ret; |
| } |
| |
| static int dspi_remove(struct platform_device *pdev) |
| { |
| struct spi_controller *ctlr = platform_get_drvdata(pdev); |
| struct fsl_dspi *dspi = spi_controller_get_devdata(ctlr); |
| |
| /* Disconnect from the SPI framework */ |
| dspi_release_dma(dspi); |
| clk_disable_unprepare(dspi->clk); |
| spi_unregister_controller(dspi->ctlr); |
| |
| return 0; |
| } |
| |
| static struct platform_driver fsl_dspi_driver = { |
| .driver.name = DRIVER_NAME, |
| .driver.of_match_table = fsl_dspi_dt_ids, |
| .driver.owner = THIS_MODULE, |
| .driver.pm = &dspi_pm, |
| .probe = dspi_probe, |
| .remove = dspi_remove, |
| }; |
| module_platform_driver(fsl_dspi_driver); |
| |
| MODULE_DESCRIPTION("Freescale DSPI Controller Driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:" DRIVER_NAME); |