| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) 2015, The Linux Foundation. All rights reserved. |
| */ |
| |
| #include <linux/etherdevice.h> |
| |
| #include "dsa_priv.h" |
| |
| #define QCA_HDR_LEN 2 |
| #define QCA_HDR_VERSION 0x2 |
| |
| #define QCA_HDR_RECV_VERSION_MASK GENMASK(15, 14) |
| #define QCA_HDR_RECV_VERSION_S 14 |
| #define QCA_HDR_RECV_PRIORITY_MASK GENMASK(13, 11) |
| #define QCA_HDR_RECV_PRIORITY_S 11 |
| #define QCA_HDR_RECV_TYPE_MASK GENMASK(10, 6) |
| #define QCA_HDR_RECV_TYPE_S 6 |
| #define QCA_HDR_RECV_FRAME_IS_TAGGED BIT(3) |
| #define QCA_HDR_RECV_SOURCE_PORT_MASK GENMASK(2, 0) |
| |
| #define QCA_HDR_XMIT_VERSION_MASK GENMASK(15, 14) |
| #define QCA_HDR_XMIT_VERSION_S 14 |
| #define QCA_HDR_XMIT_PRIORITY_MASK GENMASK(13, 11) |
| #define QCA_HDR_XMIT_PRIORITY_S 11 |
| #define QCA_HDR_XMIT_CONTROL_MASK GENMASK(10, 8) |
| #define QCA_HDR_XMIT_CONTROL_S 8 |
| #define QCA_HDR_XMIT_FROM_CPU BIT(7) |
| #define QCA_HDR_XMIT_DP_BIT_MASK GENMASK(6, 0) |
| |
| static struct sk_buff *qca_tag_xmit(struct sk_buff *skb, struct net_device *dev) |
| { |
| struct dsa_port *dp = dsa_slave_to_port(dev); |
| u16 *phdr, hdr; |
| |
| dev->stats.tx_packets++; |
| dev->stats.tx_bytes += skb->len; |
| |
| if (skb_cow_head(skb, 0) < 0) |
| return NULL; |
| |
| skb_push(skb, QCA_HDR_LEN); |
| |
| memmove(skb->data, skb->data + QCA_HDR_LEN, 2 * ETH_ALEN); |
| phdr = (u16 *)(skb->data + 2 * ETH_ALEN); |
| |
| /* Set the version field, and set destination port information */ |
| hdr = QCA_HDR_VERSION << QCA_HDR_XMIT_VERSION_S | |
| QCA_HDR_XMIT_FROM_CPU | BIT(dp->index); |
| |
| *phdr = htons(hdr); |
| |
| return skb; |
| } |
| |
| static struct sk_buff *qca_tag_rcv(struct sk_buff *skb, struct net_device *dev, |
| struct packet_type *pt) |
| { |
| u8 ver; |
| int port; |
| __be16 *phdr, hdr; |
| |
| if (unlikely(!pskb_may_pull(skb, QCA_HDR_LEN))) |
| return NULL; |
| |
| /* The QCA header is added by the switch between src addr and Ethertype |
| * At this point, skb->data points to ethertype so header should be |
| * right before |
| */ |
| phdr = (__be16 *)(skb->data - 2); |
| hdr = ntohs(*phdr); |
| |
| /* Make sure the version is correct */ |
| ver = (hdr & QCA_HDR_RECV_VERSION_MASK) >> QCA_HDR_RECV_VERSION_S; |
| if (unlikely(ver != QCA_HDR_VERSION)) |
| return NULL; |
| |
| /* Remove QCA tag and recalculate checksum */ |
| skb_pull_rcsum(skb, QCA_HDR_LEN); |
| memmove(skb->data - ETH_HLEN, skb->data - ETH_HLEN - QCA_HDR_LEN, |
| ETH_HLEN - QCA_HDR_LEN); |
| |
| /* Get source port information */ |
| port = (hdr & QCA_HDR_RECV_SOURCE_PORT_MASK); |
| |
| skb->dev = dsa_master_find_slave(dev, 0, port); |
| if (!skb->dev) |
| return NULL; |
| |
| return skb; |
| } |
| |
| static int qca_tag_flow_dissect(const struct sk_buff *skb, __be16 *proto, |
| int *offset) |
| { |
| *offset = QCA_HDR_LEN; |
| *proto = ((__be16 *)skb->data)[0]; |
| |
| return 0; |
| } |
| |
| static const struct dsa_device_ops qca_netdev_ops = { |
| .name = "qca", |
| .proto = DSA_TAG_PROTO_QCA, |
| .xmit = qca_tag_xmit, |
| .rcv = qca_tag_rcv, |
| .flow_dissect = qca_tag_flow_dissect, |
| .overhead = QCA_HDR_LEN, |
| }; |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_QCA); |
| |
| module_dsa_tag_driver(qca_netdev_ops); |