| // SPDX-License-Identifier: GPL-2.0 |
| // Copyright (c) 2019 Crane Merchandising Systems. All rights reserved. |
| // Copyright (C) 2019 Oleh Kravchenko <oleg@kaa.org.ua> |
| |
| #include <linux/delay.h> |
| #include <linux/leds.h> |
| #include <linux/module.h> |
| #include <linux/of_device.h> |
| #include <linux/spi/spi.h> |
| |
| /* |
| * EL15203000 SPI protocol description: |
| * +-----+---------+ |
| * | LED | COMMAND | |
| * +-----+---------+ |
| * | 1 | 1 | |
| * +-----+---------+ |
| * (*) LEDs MCU board expects 20 msec delay per byte. |
| * |
| * LEDs: |
| * +----------+--------------+-------------------------------------------+ |
| * | ID | NAME | DESCRIPTION | |
| * +----------+--------------+-------------------------------------------+ |
| * | 'P' 0x50 | Pipe | Consists from 5 LEDs, controlled by board | |
| * +----------+--------------+-------------------------------------------+ |
| * | 'S' 0x53 | Screen frame | Light tube around the screen | |
| * +----------+--------------+-------------------------------------------+ |
| * | 'V' 0x56 | Vending area | Highlights a cup of coffee | |
| * +----------+--------------+-------------------------------------------+ |
| * |
| * COMMAND: |
| * +----------+-----------------+--------------+--------------+ |
| * | VALUES | PIPE | SCREEN FRAME | VENDING AREA | |
| * +----------+-----------------+--------------+--------------+ |
| * | '0' 0x30 | Off | |
| * +----------+-----------------------------------------------+ |
| * | '1' 0x31 | On | |
| * +----------+-----------------+--------------+--------------+ |
| * | '2' 0x32 | Cascade | Breathing | |
| * +----------+-----------------+--------------+ |
| * | '3' 0x33 | Inverse cascade | |
| * +----------+-----------------+ |
| * | '4' 0x34 | Bounce | |
| * +----------+-----------------+ |
| * | '5' 0x35 | Inverse bounce | |
| * +----------+-----------------+ |
| */ |
| |
| /* EL15203000 default settings */ |
| #define EL_FW_DELAY_USEC 20000ul |
| #define EL_PATTERN_DELAY_MSEC 800u |
| #define EL_PATTERN_LEN 10u |
| #define EL_PATTERN_HALF_LEN (EL_PATTERN_LEN / 2) |
| |
| enum el15203000_command { |
| /* for all LEDs */ |
| EL_OFF = '0', |
| EL_ON = '1', |
| |
| /* for Screen LED */ |
| EL_SCREEN_BREATHING = '2', |
| |
| /* for Pipe LED */ |
| EL_PIPE_CASCADE = '2', |
| EL_PIPE_INV_CASCADE = '3', |
| EL_PIPE_BOUNCE = '4', |
| EL_PIPE_INV_BOUNCE = '5', |
| }; |
| |
| struct el15203000_led { |
| struct el15203000 *priv; |
| struct led_classdev ldev; |
| u32 reg; |
| }; |
| |
| struct el15203000 { |
| struct device *dev; |
| struct mutex lock; |
| struct spi_device *spi; |
| unsigned long delay; |
| size_t count; |
| struct el15203000_led leds[]; |
| }; |
| |
| static int el15203000_cmd(struct el15203000_led *led, u8 brightness) |
| { |
| int ret; |
| u8 cmd[2]; |
| size_t i; |
| |
| mutex_lock(&led->priv->lock); |
| |
| dev_dbg(led->priv->dev, "Set brightness of 0x%02x(%c) to 0x%02x(%c)", |
| led->reg, led->reg, brightness, brightness); |
| |
| /* to avoid SPI mistiming with firmware we should wait some time */ |
| if (time_after(led->priv->delay, jiffies)) { |
| dev_dbg(led->priv->dev, "Wait %luus to sync", |
| EL_FW_DELAY_USEC); |
| |
| usleep_range(EL_FW_DELAY_USEC, |
| EL_FW_DELAY_USEC + 1); |
| } |
| |
| cmd[0] = led->reg; |
| cmd[1] = brightness; |
| |
| for (i = 0; i < ARRAY_SIZE(cmd); i++) { |
| if (i) |
| usleep_range(EL_FW_DELAY_USEC, |
| EL_FW_DELAY_USEC + 1); |
| |
| ret = spi_write(led->priv->spi, &cmd[i], sizeof(cmd[i])); |
| if (ret) { |
| dev_err(led->priv->dev, |
| "spi_write() error %d", ret); |
| break; |
| } |
| } |
| |
| led->priv->delay = jiffies + usecs_to_jiffies(EL_FW_DELAY_USEC); |
| |
| mutex_unlock(&led->priv->lock); |
| |
| return ret; |
| } |
| |
| static int el15203000_set_blocking(struct led_classdev *ldev, |
| enum led_brightness brightness) |
| { |
| struct el15203000_led *led = container_of(ldev, |
| struct el15203000_led, |
| ldev); |
| |
| return el15203000_cmd(led, brightness == LED_OFF ? EL_OFF : EL_ON); |
| } |
| |
| static int el15203000_pattern_set_S(struct led_classdev *ldev, |
| struct led_pattern *pattern, |
| u32 len, int repeat) |
| { |
| struct el15203000_led *led = container_of(ldev, |
| struct el15203000_led, |
| ldev); |
| |
| if (repeat > 0 || len != 2 || |
| pattern[0].delta_t != 4000 || pattern[0].brightness != 0 || |
| pattern[1].delta_t != 4000 || pattern[1].brightness != 1) |
| return -EINVAL; |
| |
| dev_dbg(led->priv->dev, "Breathing mode for 0x%02x(%c)", |
| led->reg, led->reg); |
| |
| return el15203000_cmd(led, EL_SCREEN_BREATHING); |
| } |
| |
| static bool is_cascade(const struct led_pattern *pattern, u32 len, |
| bool inv, bool right) |
| { |
| int val, t; |
| u32 i; |
| |
| if (len != EL_PATTERN_HALF_LEN) |
| return false; |
| |
| val = right ? BIT(4) : BIT(0); |
| |
| for (i = 0; i < len; i++) { |
| t = inv ? ~val & GENMASK(4, 0) : val; |
| |
| if (pattern[i].delta_t != EL_PATTERN_DELAY_MSEC || |
| pattern[i].brightness != t) |
| return false; |
| |
| val = right ? val >> 1 : val << 1; |
| } |
| |
| return true; |
| } |
| |
| static bool is_bounce(const struct led_pattern *pattern, u32 len, bool inv) |
| { |
| if (len != EL_PATTERN_LEN) |
| return false; |
| |
| return is_cascade(pattern, EL_PATTERN_HALF_LEN, inv, false) && |
| is_cascade(pattern + EL_PATTERN_HALF_LEN, |
| EL_PATTERN_HALF_LEN, inv, true); |
| } |
| |
| static int el15203000_pattern_set_P(struct led_classdev *ldev, |
| struct led_pattern *pattern, |
| u32 len, int repeat) |
| { |
| u8 cmd; |
| struct el15203000_led *led = container_of(ldev, |
| struct el15203000_led, |
| ldev); |
| |
| if (repeat > 0) |
| return -EINVAL; |
| |
| if (is_cascade(pattern, len, false, false)) { |
| dev_dbg(led->priv->dev, "Cascade mode for 0x%02x(%c)", |
| led->reg, led->reg); |
| |
| cmd = EL_PIPE_CASCADE; |
| } else if (is_cascade(pattern, len, true, false)) { |
| dev_dbg(led->priv->dev, "Inverse cascade mode for 0x%02x(%c)", |
| led->reg, led->reg); |
| |
| cmd = EL_PIPE_INV_CASCADE; |
| } else if (is_bounce(pattern, len, false)) { |
| dev_dbg(led->priv->dev, "Bounce mode for 0x%02x(%c)", |
| led->reg, led->reg); |
| |
| cmd = EL_PIPE_BOUNCE; |
| } else if (is_bounce(pattern, len, true)) { |
| dev_dbg(led->priv->dev, "Inverse bounce mode for 0x%02x(%c)", |
| led->reg, led->reg); |
| |
| cmd = EL_PIPE_INV_BOUNCE; |
| } else { |
| dev_err(led->priv->dev, "Invalid hw_pattern for 0x%02x(%c)!", |
| led->reg, led->reg); |
| |
| return -EINVAL; |
| } |
| |
| return el15203000_cmd(led, cmd); |
| } |
| |
| static int el15203000_pattern_clear(struct led_classdev *ldev) |
| { |
| struct el15203000_led *led = container_of(ldev, |
| struct el15203000_led, |
| ldev); |
| |
| return el15203000_cmd(led, EL_OFF); |
| } |
| |
| static int el15203000_probe_dt(struct el15203000 *priv) |
| { |
| struct el15203000_led *led = priv->leds; |
| struct fwnode_handle *child; |
| int ret; |
| |
| device_for_each_child_node(priv->dev, child) { |
| struct led_init_data init_data = {}; |
| |
| ret = fwnode_property_read_u32(child, "reg", &led->reg); |
| if (ret) { |
| dev_err(priv->dev, "LED without ID number"); |
| fwnode_handle_put(child); |
| |
| break; |
| } |
| |
| if (led->reg > U8_MAX) { |
| dev_err(priv->dev, "LED value %d is invalid", led->reg); |
| fwnode_handle_put(child); |
| |
| return -EINVAL; |
| } |
| |
| fwnode_property_read_string(child, "linux,default-trigger", |
| &led->ldev.default_trigger); |
| |
| led->priv = priv; |
| led->ldev.max_brightness = LED_ON; |
| led->ldev.brightness_set_blocking = el15203000_set_blocking; |
| |
| if (led->reg == 'S') { |
| led->ldev.pattern_set = el15203000_pattern_set_S; |
| led->ldev.pattern_clear = el15203000_pattern_clear; |
| } else if (led->reg == 'P') { |
| led->ldev.pattern_set = el15203000_pattern_set_P; |
| led->ldev.pattern_clear = el15203000_pattern_clear; |
| } |
| |
| init_data.fwnode = child; |
| ret = devm_led_classdev_register_ext(priv->dev, &led->ldev, |
| &init_data); |
| if (ret) { |
| dev_err(priv->dev, |
| "failed to register LED device %s, err %d", |
| led->ldev.name, ret); |
| fwnode_handle_put(child); |
| |
| break; |
| } |
| |
| led++; |
| } |
| |
| return ret; |
| } |
| |
| static int el15203000_probe(struct spi_device *spi) |
| { |
| struct el15203000 *priv; |
| size_t count; |
| |
| count = device_get_child_node_count(&spi->dev); |
| if (!count) { |
| dev_err(&spi->dev, "LEDs are not defined in device tree!"); |
| return -ENODEV; |
| } |
| |
| priv = devm_kzalloc(&spi->dev, struct_size(priv, leds, count), |
| GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| mutex_init(&priv->lock); |
| priv->count = count; |
| priv->dev = &spi->dev; |
| priv->spi = spi; |
| priv->delay = jiffies - |
| usecs_to_jiffies(EL_FW_DELAY_USEC); |
| |
| spi_set_drvdata(spi, priv); |
| |
| return el15203000_probe_dt(priv); |
| } |
| |
| static int el15203000_remove(struct spi_device *spi) |
| { |
| struct el15203000 *priv = spi_get_drvdata(spi); |
| |
| mutex_destroy(&priv->lock); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id el15203000_dt_ids[] = { |
| { .compatible = "crane,el15203000", }, |
| {}, |
| }; |
| |
| MODULE_DEVICE_TABLE(of, el15203000_dt_ids); |
| |
| static struct spi_driver el15203000_driver = { |
| .probe = el15203000_probe, |
| .remove = el15203000_remove, |
| .driver = { |
| .name = KBUILD_MODNAME, |
| .of_match_table = el15203000_dt_ids, |
| }, |
| }; |
| |
| module_spi_driver(el15203000_driver); |
| |
| MODULE_AUTHOR("Oleh Kravchenko <oleg@kaa.org.ua>"); |
| MODULE_DESCRIPTION("el15203000 LED driver"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("spi:el15203000"); |