| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * AS3711 PMIC regulator driver, using DCDC Step Down and LDO supplies |
| * |
| * Copyright (C) 2012 Renesas Electronics Corporation |
| * Author: Guennadi Liakhovetski, <g.liakhovetski@gmx.de> |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/init.h> |
| #include <linux/mfd/as3711.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/of_regulator.h> |
| #include <linux/slab.h> |
| |
| /* |
| * The regulator API supports 4 modes of operataion: FAST, NORMAL, IDLE and |
| * STANDBY. We map them in the following way to AS3711 SD1-4 DCDC modes: |
| * FAST: sdX_fast=1 |
| * NORMAL: low_noise=1 |
| * IDLE: low_noise=0 |
| */ |
| |
| static int as3711_set_mode_sd(struct regulator_dev *rdev, unsigned int mode) |
| { |
| unsigned int fast_bit = rdev->desc->enable_mask, |
| low_noise_bit = fast_bit << 4; |
| u8 val; |
| |
| switch (mode) { |
| case REGULATOR_MODE_FAST: |
| val = fast_bit | low_noise_bit; |
| break; |
| case REGULATOR_MODE_NORMAL: |
| val = low_noise_bit; |
| break; |
| case REGULATOR_MODE_IDLE: |
| val = 0; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return regmap_update_bits(rdev->regmap, AS3711_SD_CONTROL_1, |
| low_noise_bit | fast_bit, val); |
| } |
| |
| static unsigned int as3711_get_mode_sd(struct regulator_dev *rdev) |
| { |
| unsigned int fast_bit = rdev->desc->enable_mask, |
| low_noise_bit = fast_bit << 4, mask = fast_bit | low_noise_bit; |
| unsigned int val; |
| int ret = regmap_read(rdev->regmap, AS3711_SD_CONTROL_1, &val); |
| |
| if (ret < 0) |
| return ret; |
| |
| if ((val & mask) == mask) |
| return REGULATOR_MODE_FAST; |
| |
| if ((val & mask) == low_noise_bit) |
| return REGULATOR_MODE_NORMAL; |
| |
| if (!(val & mask)) |
| return REGULATOR_MODE_IDLE; |
| |
| return -EINVAL; |
| } |
| |
| static const struct regulator_ops as3711_sd_ops = { |
| .is_enabled = regulator_is_enabled_regmap, |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .list_voltage = regulator_list_voltage_linear_range, |
| .map_voltage = regulator_map_voltage_linear_range, |
| .get_mode = as3711_get_mode_sd, |
| .set_mode = as3711_set_mode_sd, |
| }; |
| |
| static const struct regulator_ops as3711_aldo_ops = { |
| .is_enabled = regulator_is_enabled_regmap, |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .list_voltage = regulator_list_voltage_linear_range, |
| .map_voltage = regulator_map_voltage_linear_range, |
| }; |
| |
| static const struct regulator_ops as3711_dldo_ops = { |
| .is_enabled = regulator_is_enabled_regmap, |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .list_voltage = regulator_list_voltage_linear_range, |
| .map_voltage = regulator_map_voltage_linear_range, |
| }; |
| |
| static const struct regulator_linear_range as3711_sd_ranges[] = { |
| REGULATOR_LINEAR_RANGE(612500, 0x1, 0x40, 12500), |
| REGULATOR_LINEAR_RANGE(1425000, 0x41, 0x70, 25000), |
| REGULATOR_LINEAR_RANGE(2650000, 0x71, 0x7f, 50000), |
| }; |
| |
| static const struct regulator_linear_range as3711_aldo_ranges[] = { |
| REGULATOR_LINEAR_RANGE(1200000, 0, 0xf, 50000), |
| REGULATOR_LINEAR_RANGE(1800000, 0x10, 0x1f, 100000), |
| }; |
| |
| static const struct regulator_linear_range as3711_dldo_ranges[] = { |
| REGULATOR_LINEAR_RANGE(900000, 0, 0x10, 50000), |
| REGULATOR_LINEAR_RANGE(1750000, 0x20, 0x3f, 50000), |
| }; |
| |
| #define AS3711_REG(_id, _en_reg, _en_bit, _vmask, _sfx) \ |
| [AS3711_REGULATOR_ ## _id] = { \ |
| .name = "as3711-regulator-" # _id, \ |
| .id = AS3711_REGULATOR_ ## _id, \ |
| .n_voltages = (_vmask + 1), \ |
| .ops = &as3711_ ## _sfx ## _ops, \ |
| .type = REGULATOR_VOLTAGE, \ |
| .owner = THIS_MODULE, \ |
| .vsel_reg = AS3711_ ## _id ## _VOLTAGE, \ |
| .vsel_mask = _vmask, \ |
| .enable_reg = AS3711_ ## _en_reg, \ |
| .enable_mask = BIT(_en_bit), \ |
| .linear_ranges = as3711_ ## _sfx ## _ranges, \ |
| .n_linear_ranges = ARRAY_SIZE(as3711_ ## _sfx ## _ranges), \ |
| } |
| |
| static const struct regulator_desc as3711_reg_desc[] = { |
| AS3711_REG(SD_1, SD_CONTROL, 0, 0x7f, sd), |
| AS3711_REG(SD_2, SD_CONTROL, 1, 0x7f, sd), |
| AS3711_REG(SD_3, SD_CONTROL, 2, 0x7f, sd), |
| AS3711_REG(SD_4, SD_CONTROL, 3, 0x7f, sd), |
| AS3711_REG(LDO_1, LDO_1_VOLTAGE, 7, 0x1f, aldo), |
| AS3711_REG(LDO_2, LDO_2_VOLTAGE, 7, 0x1f, aldo), |
| AS3711_REG(LDO_3, LDO_3_VOLTAGE, 7, 0x3f, dldo), |
| AS3711_REG(LDO_4, LDO_4_VOLTAGE, 7, 0x3f, dldo), |
| AS3711_REG(LDO_5, LDO_5_VOLTAGE, 7, 0x3f, dldo), |
| AS3711_REG(LDO_6, LDO_6_VOLTAGE, 7, 0x3f, dldo), |
| AS3711_REG(LDO_7, LDO_7_VOLTAGE, 7, 0x3f, dldo), |
| AS3711_REG(LDO_8, LDO_8_VOLTAGE, 7, 0x3f, dldo), |
| /* StepUp output voltage depends on supplying regulator */ |
| }; |
| |
| #define AS3711_REGULATOR_NUM ARRAY_SIZE(as3711_reg_desc) |
| |
| static struct of_regulator_match |
| as3711_regulator_matches[AS3711_REGULATOR_NUM] = { |
| [AS3711_REGULATOR_SD_1] = { .name = "sd1" }, |
| [AS3711_REGULATOR_SD_2] = { .name = "sd2" }, |
| [AS3711_REGULATOR_SD_3] = { .name = "sd3" }, |
| [AS3711_REGULATOR_SD_4] = { .name = "sd4" }, |
| [AS3711_REGULATOR_LDO_1] = { .name = "ldo1" }, |
| [AS3711_REGULATOR_LDO_2] = { .name = "ldo2" }, |
| [AS3711_REGULATOR_LDO_3] = { .name = "ldo3" }, |
| [AS3711_REGULATOR_LDO_4] = { .name = "ldo4" }, |
| [AS3711_REGULATOR_LDO_5] = { .name = "ldo5" }, |
| [AS3711_REGULATOR_LDO_6] = { .name = "ldo6" }, |
| [AS3711_REGULATOR_LDO_7] = { .name = "ldo7" }, |
| [AS3711_REGULATOR_LDO_8] = { .name = "ldo8" }, |
| }; |
| |
| static int as3711_regulator_parse_dt(struct device *dev, |
| struct device_node **of_node, const int count) |
| { |
| struct as3711_regulator_pdata *pdata = dev_get_platdata(dev); |
| struct device_node *regulators = |
| of_get_child_by_name(dev->parent->of_node, "regulators"); |
| struct of_regulator_match *match; |
| int ret, i; |
| |
| if (!regulators) { |
| dev_err(dev, "regulator node not found\n"); |
| return -ENODEV; |
| } |
| |
| ret = of_regulator_match(dev->parent, regulators, |
| as3711_regulator_matches, count); |
| of_node_put(regulators); |
| if (ret < 0) { |
| dev_err(dev, "Error parsing regulator init data: %d\n", ret); |
| return ret; |
| } |
| |
| for (i = 0, match = as3711_regulator_matches; i < count; i++, match++) |
| if (match->of_node) { |
| pdata->init_data[i] = match->init_data; |
| of_node[i] = match->of_node; |
| } |
| |
| return 0; |
| } |
| |
| static int as3711_regulator_probe(struct platform_device *pdev) |
| { |
| struct as3711_regulator_pdata *pdata = dev_get_platdata(&pdev->dev); |
| struct as3711 *as3711 = dev_get_drvdata(pdev->dev.parent); |
| struct regulator_config config = {.dev = &pdev->dev,}; |
| struct device_node *of_node[AS3711_REGULATOR_NUM] = {}; |
| struct regulator_dev *rdev; |
| int ret; |
| int id; |
| |
| if (!pdata) { |
| dev_err(&pdev->dev, "No platform data...\n"); |
| return -ENODEV; |
| } |
| |
| if (pdev->dev.parent->of_node) { |
| ret = as3711_regulator_parse_dt(&pdev->dev, of_node, AS3711_REGULATOR_NUM); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "DT parsing failed: %d\n", ret); |
| return ret; |
| } |
| } |
| |
| for (id = 0; id < AS3711_REGULATOR_NUM; id++) { |
| config.init_data = pdata->init_data[id]; |
| config.regmap = as3711->regmap; |
| config.of_node = of_node[id]; |
| |
| rdev = devm_regulator_register(&pdev->dev, &as3711_reg_desc[id], |
| &config); |
| if (IS_ERR(rdev)) { |
| dev_err(&pdev->dev, "Failed to register regulator %s\n", |
| as3711_reg_desc[id].name); |
| return PTR_ERR(rdev); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static struct platform_driver as3711_regulator_driver = { |
| .driver = { |
| .name = "as3711-regulator", |
| }, |
| .probe = as3711_regulator_probe, |
| }; |
| |
| static int __init as3711_regulator_init(void) |
| { |
| return platform_driver_register(&as3711_regulator_driver); |
| } |
| subsys_initcall(as3711_regulator_init); |
| |
| static void __exit as3711_regulator_exit(void) |
| { |
| platform_driver_unregister(&as3711_regulator_driver); |
| } |
| module_exit(as3711_regulator_exit); |
| |
| MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>"); |
| MODULE_DESCRIPTION("AS3711 regulator driver"); |
| MODULE_ALIAS("platform:as3711-regulator"); |
| MODULE_LICENSE("GPL v2"); |