| // SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
| /* |
| * Copyright 2022 Toradex |
| */ |
| |
| #include <dt-bindings/pwm/pwm.h> |
| |
| / { |
| chosen { |
| stdout-path = &lpuart1; |
| }; |
| |
| /* Apalis BKL1 */ |
| backlight: backlight { |
| compatible = "pwm-backlight"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gpio_bkl_on>; |
| brightness-levels = <0 45 63 88 119 158 203 255>; |
| default-brightness-level = <4>; |
| enable-gpios = <&lsio_gpio1 4 GPIO_ACTIVE_HIGH>; /* Apalis BKL1_ON */ |
| /* TODO: hook-up to Apalis BKL1_PWM */ |
| status = "disabled"; |
| }; |
| |
| gpio_fan: gpio-fan { |
| compatible = "gpio-fan"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gpio8>; |
| gpios = <&lsio_gpio3 28 GPIO_ACTIVE_HIGH>; |
| gpio-fan,speed-map = < 0 0 |
| 3000 1>; |
| }; |
| |
| /* TODO: LVDS Panel */ |
| |
| /* TODO: Shared PCIe/SATA Reference Clock */ |
| |
| /* TODO: PCIe Wi-Fi Reference Clock */ |
| |
| /* |
| * Power management bus used to control LDO1OUT of the |
| * second PMIC PF8100. This is used for controlling voltage levels of |
| * typespecific RGMII signals and Apalis UART2_RTS UART2_CTS. |
| * |
| * IMX_SC_R_BOARD_R1 for 3.3V |
| * IMX_SC_R_BOARD_R2 for 1.8V |
| * IMX_SC_R_BOARD_R3 for 2.5V |
| * Note that for 2.5V operation the pad muxing needs to be changed, |
| * compare with PSW_OVR field of IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETA_PAD. |
| * |
| * those power domains are mutually exclusive. |
| */ |
| reg_ext_rgmii: regulator-ext-rgmii { |
| compatible = "regulator-fixed"; |
| power-domains = <&pd IMX_SC_R_BOARD_R1>; |
| regulator-max-microvolt = <3300000>; |
| regulator-min-microvolt = <3300000>; |
| regulator-name = "VDD_EXT_RGMII (LDO1)"; |
| |
| regulator-state-mem { |
| regulator-off-in-suspend; |
| }; |
| }; |
| |
| reg_module_3v3: regulator-module-3v3 { |
| compatible = "regulator-fixed"; |
| regulator-max-microvolt = <3300000>; |
| regulator-min-microvolt = <3300000>; |
| regulator-name = "+V3.3"; |
| }; |
| |
| reg_module_3v3_avdd: regulator-module-3v3-avdd { |
| compatible = "regulator-fixed"; |
| regulator-max-microvolt = <3300000>; |
| regulator-min-microvolt = <3300000>; |
| regulator-name = "+V3.3_AUDIO"; |
| }; |
| |
| reg_module_wifi: regulator-module-wifi { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_wifi_pdn>; |
| gpio = <&lsio_gpio1 28 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| regulator-name = "wifi_pwrdn_fake_regulator"; |
| regulator-settling-time-us = <100>; |
| |
| regulator-state-mem { |
| regulator-off-in-suspend; |
| }; |
| }; |
| |
| reg_pcie_switch: regulator-pcie-switch { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gpio7>; |
| gpio = <&lsio_gpio3 26 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| regulator-max-microvolt = <1800000>; |
| regulator-min-microvolt = <1800000>; |
| regulator-name = "pcie_switch"; |
| startup-delay-us = <100000>; |
| }; |
| |
| reg_usb_host_vbus: regulator-usb-host-vbus { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usbh_en>; |
| /* Apalis USBH_EN */ |
| gpio = <&lsio_gpio4 4 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| regulator-always-on; |
| regulator-max-microvolt = <5000000>; |
| regulator-min-microvolt = <5000000>; |
| regulator-name = "usb-host-vbus"; |
| }; |
| |
| reg_usb_hsic: regulator-usb-hsic { |
| compatible = "regulator-fixed"; |
| regulator-max-microvolt = <3000000>; |
| regulator-min-microvolt = <3000000>; |
| regulator-name = "usb-hsic-dummy"; |
| }; |
| |
| reg_usb_phy: regulator-usb-hsic1 { |
| compatible = "regulator-fixed"; |
| regulator-max-microvolt = <3000000>; |
| regulator-min-microvolt = <3000000>; |
| regulator-name = "usb-phy-dummy"; |
| }; |
| |
| reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| decoder_boot: decoder-boot@84000000 { |
| reg = <0 0x84000000 0 0x2000000>; |
| no-map; |
| }; |
| |
| encoder1_boot: encoder1-boot@86000000 { |
| reg = <0 0x86000000 0 0x200000>; |
| no-map; |
| }; |
| |
| encoder2_boot: encoder2-boot@86200000 { |
| reg = <0 0x86200000 0 0x200000>; |
| no-map; |
| }; |
| |
| /* |
| * reserved-memory layout |
| * 0x8800_0000 ~ 0x8FFF_FFFF is reserved for M4 |
| * Shouldn't be used at A core and Linux side. |
| * |
| */ |
| m4_reserved: m4@88000000 { |
| reg = <0 0x88000000 0 0x8000000>; |
| no-map; |
| }; |
| |
| rpmsg_reserved: rpmsg@90200000 { |
| reg = <0 0x90200000 0 0x200000>; |
| no-map; |
| }; |
| |
| vdevbuffer: vdevbuffer@90400000 { |
| compatible = "shared-dma-pool"; |
| reg = <0 0x90400000 0 0x100000>; |
| no-map; |
| }; |
| |
| decoder_rpc: decoder-rpc@92000000 { |
| reg = <0 0x92000000 0 0x200000>; |
| no-map; |
| }; |
| |
| dsp_reserved: dsp@92400000 { |
| reg = <0 0x92400000 0 0x2000000>; |
| no-map; |
| }; |
| |
| encoder1_rpc: encoder1-rpc@94400000 { |
| reg = <0 0x94400000 0 0x700000>; |
| no-map; |
| }; |
| |
| encoder2_rpc: encoder2-rpc@94b00000 { |
| reg = <0 0x94b00000 0 0x700000>; |
| no-map; |
| }; |
| |
| /* global autoconfigured region for contiguous allocations */ |
| linux,cma { |
| compatible = "shared-dma-pool"; |
| alloc-ranges = <0 0xc0000000 0 0x3c000000>; |
| linux,cma-default; |
| reusable; |
| size = <0 0x3c000000>; |
| }; |
| }; |
| |
| /* TODO: Apalis Analogue Audio */ |
| |
| /* TODO: HDMI Audio */ |
| |
| /* TODO: Apalis SPDIF1 */ |
| |
| touchscreen: touchscreen { |
| compatible = "toradex,vf50-touchscreen"; |
| interrupt-parent = <&lsio_gpio3>; |
| interrupts = <22 IRQ_TYPE_LEVEL_LOW>; |
| pinctrl-names = "idle", "default"; |
| pinctrl-0 = <&pinctrl_touchctrl_idle>, <&pinctrl_touchctrl_gpios>; |
| pinctrl-1 = <&pinctrl_adc1>, <&pinctrl_touchctrl_gpios>; |
| io-channels = <&adc1 2>, <&adc1 1>, |
| <&adc1 0>, <&adc1 3>; |
| vf50-ts-min-pressure = <200>; |
| xp-gpios = <&lsio_gpio2 4 GPIO_ACTIVE_LOW>; |
| xm-gpios = <&lsio_gpio2 5 GPIO_ACTIVE_HIGH>; |
| yp-gpios = <&lsio_gpio2 17 GPIO_ACTIVE_LOW>; |
| ym-gpios = <&lsio_gpio2 21 GPIO_ACTIVE_HIGH>; |
| /* |
| * NOTE: you must remove the pinctrl-adc1 from the adc1 |
| * node below to use the touchscreen |
| */ |
| status = "disabled"; |
| }; |
| |
| }; |
| |
| &adc0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_adc0>; |
| }; |
| |
| &adc1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_adc1>; |
| }; |
| |
| /* TODO: Asynchronous Sample Rate Converter (ASRC) */ |
| |
| /* Apalis ETH1 */ |
| &fec1 { |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&pinctrl_fec1>; |
| pinctrl-1 = <&pinctrl_fec1_sleep>; |
| fsl,magic-packet; |
| phy-handle = <ðphy0>; |
| phy-mode = "rgmii-id"; |
| |
| mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ethphy0: ethernet-phy@7 { |
| compatible = "ethernet-phy-ieee802.3-c22"; |
| reg = <7>; |
| interrupt-parent = <&lsio_gpio1>; |
| interrupts = <29 IRQ_TYPE_LEVEL_LOW>; |
| micrel,led-mode = <0>; |
| reset-assert-us = <2>; |
| reset-deassert-us = <2>; |
| reset-gpios = <&lsio_gpio1 11 GPIO_ACTIVE_LOW>; |
| reset-names = "phy"; |
| }; |
| }; |
| }; |
| |
| /* Apalis CAN1 */ |
| &flexcan1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexcan1>; |
| }; |
| |
| /* Apalis CAN2 */ |
| &flexcan2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexcan2>; |
| }; |
| |
| /* Apalis CAN3 (optional) */ |
| &flexcan3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexcan3>; |
| }; |
| |
| /* TODO: Apalis HDMI1 */ |
| |
| /* On-module I2C */ |
| &i2c1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_lpi2c1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-frequency = <100000>; |
| status = "okay"; |
| |
| /* TODO: Audio Codec */ |
| |
| /* USB3503A */ |
| usb-hub@8 { |
| compatible = "smsc,usb3503a"; |
| reg = <0x08>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usb3503a>; |
| connect-gpios = <&lsio_gpio0 31 GPIO_ACTIVE_LOW>; |
| initial-mode = <1>; |
| intn-gpios = <&lsio_gpio1 1 GPIO_ACTIVE_HIGH>; |
| refclk-frequency = <25000000>; |
| reset-gpios = <&lsio_gpio1 2 GPIO_ACTIVE_LOW>; |
| }; |
| }; |
| |
| /* Apalis I2C1 */ |
| &i2c2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_lpi2c2>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-frequency = <100000>; |
| |
| atmel_mxt_ts: touch@4a { |
| compatible = "atmel,maxtouch"; |
| reg = <0x4a>; |
| interrupt-parent = <&lsio_gpio4>; |
| interrupts = <1 IRQ_TYPE_EDGE_FALLING>; /* Apalis GPIO5 */ |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gpio5>, <&pinctrl_gpio6>; |
| reset-gpios = <&lsio_gpio4 2 GPIO_ACTIVE_LOW>; /* Apalis GPIO6 */ |
| status = "disabled"; |
| }; |
| |
| /* M41T0M6 real time clock on carrier board */ |
| rtc_i2c: rtc@68 { |
| compatible = "st,m41t0"; |
| reg = <0x68>; |
| status = "disabled"; |
| }; |
| }; |
| |
| /* Apalis I2C3 (CAM) */ |
| &i2c3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_lpi2c3>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clock-frequency = <100000>; |
| }; |
| |
| &jpegdec { |
| status = "okay"; |
| }; |
| |
| &jpegenc { |
| status = "okay"; |
| }; |
| |
| /* TODO: Apalis LVDS1 */ |
| |
| /* Apalis SPI1 */ |
| &lpspi0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_lpspi0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cs-gpios = <&lsio_gpio3 5 GPIO_ACTIVE_LOW>; |
| }; |
| |
| /* Apalis SPI2 */ |
| &lpspi2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_lpspi2>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cs-gpios = <&lsio_gpio3 10 GPIO_ACTIVE_LOW>; |
| }; |
| |
| /* Apalis UART3 */ |
| &lpuart0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_lpuart0>; |
| }; |
| |
| /* Apalis UART1 */ |
| &lpuart1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_lpuart1>; |
| }; |
| |
| /* Apalis UART4 */ |
| &lpuart2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_lpuart2>; |
| }; |
| |
| /* Apalis UART2 */ |
| &lpuart3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_lpuart3>; |
| }; |
| |
| &lsio_gpio0 { |
| gpio-line-names = "MXM3_279", |
| "MXM3_277", |
| "MXM3_135", |
| "MXM3_203", |
| "MXM3_201", |
| "MXM3_275", |
| "MXM3_110", |
| "MXM3_120", |
| "MXM3_1/GPIO1", |
| "MXM3_3/GPIO2", |
| "MXM3_124", |
| "MXM3_122", |
| "MXM3_5/GPIO3", |
| "MXM3_7/GPIO4", |
| "", |
| "", |
| "MXM3_4", |
| "MXM3_211", |
| "MXM3_209", |
| "MXM3_2", |
| "MXM3_136", |
| "MXM3_134", |
| "MXM3_6", |
| "MXM3_8", |
| "MXM3_112", |
| "MXM3_118", |
| "MXM3_114", |
| "MXM3_116"; |
| }; |
| |
| &lsio_gpio1 { |
| gpio-line-names = "", |
| "", |
| "", |
| "", |
| "MXM3_286", |
| "", |
| "MXM3_87", |
| "MXM3_99", |
| "MXM3_138", |
| "MXM3_140", |
| "MXM3_239", |
| "", |
| "MXM3_281", |
| "MXM3_283", |
| "MXM3_126", |
| "MXM3_132", |
| "", |
| "", |
| "", |
| "", |
| "MXM3_173", |
| "MXM3_175", |
| "MXM3_123"; |
| |
| hdmi-ctrl-hog { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_hdmi_ctrl>; |
| gpio-hog; |
| gpios = <30 GPIO_ACTIVE_HIGH>; |
| line-name = "CONNECTOR_IS_HDMI"; |
| /* Set signals depending on HDP device type, 0 DP, 1 HDMI */ |
| output-high; |
| }; |
| }; |
| |
| &lsio_gpio2 { |
| gpio-line-names = "", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "MXM3_198", |
| "MXM3_35", |
| "MXM3_164", |
| "", |
| "", |
| "", |
| "", |
| "MXM3_217", |
| "MXM3_215", |
| "", |
| "", |
| "MXM3_193", |
| "MXM3_194", |
| "MXM3_37", |
| "", |
| "MXM3_271", |
| "MXM3_273", |
| "MXM3_195", |
| "MXM3_197", |
| "MXM3_177", |
| "MXM3_179", |
| "MXM3_181", |
| "MXM3_183", |
| "MXM3_185", |
| "MXM3_187"; |
| |
| pcie-wifi-hog { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pcie_wifi_refclk>; |
| gpio-hog; |
| gpios = <11 GPIO_ACTIVE_HIGH>; |
| line-name = "PCIE_WIFI_CLK"; |
| output-high; |
| }; |
| }; |
| |
| &lsio_gpio3 { |
| gpio-line-names = "MXM3_191", |
| "", |
| "MXM3_221", |
| "MXM3_225", |
| "MXM3_223", |
| "MXM3_227", |
| "MXM3_200", |
| "MXM3_235", |
| "MXM3_231", |
| "MXM3_229", |
| "MXM3_233", |
| "MXM3_204", |
| "MXM3_196", |
| "", |
| "MXM3_202", |
| "", |
| "", |
| "", |
| "MXM3_305", |
| "MXM3_307", |
| "MXM3_309", |
| "MXM3_311", |
| "MXM3_315", |
| "MXM3_317", |
| "MXM3_319", |
| "MXM3_321", |
| "MXM3_15/GPIO7", |
| "MXM3_63", |
| "MXM3_17/GPIO8", |
| "MXM3_12", |
| "MXM3_14", |
| "MXM3_16"; |
| }; |
| |
| &lsio_gpio4 { |
| gpio-line-names = "MXM3_18", |
| "MXM3_11/GPIO5", |
| "MXM3_13/GPIO6", |
| "MXM3_274", |
| "MXM3_84", |
| "MXM3_262", |
| "MXM3_96", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "MXM3_190", |
| "", |
| "", |
| "", |
| "MXM3_269", |
| "MXM3_251", |
| "MXM3_253", |
| "MXM3_295", |
| "MXM3_299", |
| "MXM3_301", |
| "MXM3_297", |
| "MXM3_293", |
| "MXM3_291", |
| "MXM3_289", |
| "MXM3_287"; |
| |
| /* Enable pcie root / sata ref clock unconditionally */ |
| pcie-sata-hog { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pcie_sata_refclk>; |
| gpio-hog; |
| gpios = <11 GPIO_ACTIVE_HIGH>; |
| line-name = "PCIE_SATA_CLK"; |
| output-high; |
| }; |
| }; |
| |
| &lsio_gpio5 { |
| gpio-line-names = "", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "MXM3_150", |
| "MXM3_160", |
| "MXM3_162", |
| "MXM3_144", |
| "MXM3_146", |
| "MXM3_148", |
| "MXM3_152", |
| "MXM3_156", |
| "MXM3_158", |
| "MXM3_159", |
| "MXM3_184", |
| "MXM3_180", |
| "MXM3_186", |
| "MXM3_188", |
| "MXM3_176", |
| "MXM3_178"; |
| }; |
| |
| &lsio_gpio6 { |
| gpio-line-names = "", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "MXM3_261", |
| "MXM3_263", |
| "MXM3_259", |
| "MXM3_257", |
| "MXM3_255", |
| "MXM3_128", |
| "MXM3_130", |
| "MXM3_265", |
| "MXM3_249", |
| "MXM3_247", |
| "MXM3_245", |
| "MXM3_243"; |
| }; |
| |
| /* Apalis PWM3, MXM3 pin 6 */ |
| &lsio_pwm0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm0>; |
| #pwm-cells = <3>; |
| }; |
| |
| /* Apalis PWM4, MXM3 pin 8 */ |
| &lsio_pwm1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm1>; |
| #pwm-cells = <3>; |
| }; |
| |
| /* Apalis PWM1, MXM3 pin 2 */ |
| &lsio_pwm2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm2>; |
| #pwm-cells = <3>; |
| }; |
| |
| /* Apalis PWM2, MXM3 pin 4 */ |
| &lsio_pwm3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm3>; |
| #pwm-cells = <3>; |
| }; |
| |
| /* Messaging Units */ |
| &mu_m0 { |
| status = "okay"; |
| }; |
| |
| &mu1_m0 { |
| status = "okay"; |
| }; |
| |
| &mu2_m0 { |
| status = "okay"; |
| }; |
| |
| /* TODO: Apalis PCIE1 */ |
| |
| /* TODO: On-module Wi-Fi */ |
| |
| /* TODO: Apalis BKL1_PWM */ |
| |
| /* TODO: Apalis DAP1 */ |
| |
| /* TODO: Analogue Audio */ |
| |
| /* TODO: Apalis SATA1 */ |
| |
| /* TODO: Apalis SPDIF1 */ |
| |
| /* TODO: Thermal Zones */ |
| |
| /* TODO: Apalis USBH2, Apalis USBH3 and on-module Wi-Fi via on-module HSIC Hub */ |
| |
| /* TODO: Apalis USBH4 */ |
| |
| /* Apalis USBO1 */ |
| &usbphy1 { |
| phy-3p0-supply = <®_usb_phy>; |
| status = "okay"; |
| }; |
| |
| &usbotg1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usbotg1>; |
| adp-disable; |
| hnp-disable; |
| over-current-active-low; |
| power-active-high; |
| srp-disable; |
| }; |
| |
| /* On-module eMMC */ |
| &usdhc1 { |
| pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| pinctrl-0 = <&pinctrl_usdhc1>; |
| pinctrl-1 = <&pinctrl_usdhc1_100mhz>; |
| pinctrl-2 = <&pinctrl_usdhc1_200mhz>; |
| bus-width = <8>; |
| non-removable; |
| status = "okay"; |
| }; |
| |
| /* Apalis MMC1 */ |
| &usdhc2 { |
| pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; |
| pinctrl-0 = <&pinctrl_usdhc2_4bit>, |
| <&pinctrl_usdhc2_8bit>, |
| <&pinctrl_mmc1_cd>; |
| pinctrl-1 = <&pinctrl_usdhc2_4bit_100mhz>, |
| <&pinctrl_usdhc2_8bit_100mhz>, |
| <&pinctrl_mmc1_cd>; |
| pinctrl-2 = <&pinctrl_usdhc2_4bit_200mhz>, |
| <&pinctrl_usdhc2_8bit_200mhz>, |
| <&pinctrl_mmc1_cd>; |
| pinctrl-3 = <&pinctrl_usdhc2_4bit_sleep>, |
| <&pinctrl_usdhc2_8bit_sleep>, |
| <&pinctrl_mmc1_cd_sleep>; |
| bus-width = <8>; |
| cd-gpios = <&lsio_gpio2 9 GPIO_ACTIVE_LOW>; /* Apalis MMC1_CD# */ |
| no-1-8-v; |
| }; |
| |
| /* Apalis SD1 */ |
| &usdhc3 { |
| pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_sd1_cd>; |
| pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_sd1_cd>; |
| pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_sd1_cd>; |
| bus-width = <4>; |
| cd-gpios = <&lsio_gpio4 12 GPIO_ACTIVE_LOW>; /* Apalis SD1_CD# */ |
| no-1-8-v; |
| }; |
| |
| /* Video Processing Unit */ |
| &vpu { |
| compatible = "nxp,imx8qm-vpu"; |
| status = "okay"; |
| }; |
| |
| &vpu_core0 { |
| reg = <0x2d080000 0x10000>; |
| memory-region = <&decoder_boot>, <&decoder_rpc>; |
| status = "okay"; |
| }; |
| |
| &vpu_core1 { |
| reg = <0x2d090000 0x10000>; |
| memory-region = <&encoder1_boot>, <&encoder1_rpc>; |
| status = "okay"; |
| }; |
| |
| &vpu_core2 { |
| reg = <0x2d0a0000 0x10000>; |
| memory-region = <&encoder2_boot>, <&encoder2_rpc>; |
| status = "okay"; |
| }; |
| |
| &iomuxc { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_cam1_gpios>, <&pinctrl_dap1_gpios>, |
| <&pinctrl_esai0_gpios>, <&pinctrl_fec2_gpios>, |
| <&pinctrl_gpio3>, <&pinctrl_gpio4>, <&pinctrl_gpio_keys>, |
| <&pinctrl_gpio_usbh_oc_n>, <&pinctrl_lpuart1ctrl>, |
| <&pinctrl_lvds0_i2c0_gpio>, <&pinctrl_lvds1_i2c0_gpios>, |
| <&pinctrl_mipi_dsi_0_1_en>, <&pinctrl_mipi_dsi1_gpios>, |
| <&pinctrl_mlb_gpios>, <&pinctrl_qspi1a_gpios>, |
| <&pinctrl_sata1_act>, <&pinctrl_sim0_gpios>, |
| <&pinctrl_usdhc1_gpios>; |
| |
| /* Apalis AN1_ADC */ |
| pinctrl_adc0: adc0grp { |
| fsl,pins = /* Apalis AN1_ADC0 */ |
| <IMX8QM_ADC_IN0_DMA_ADC0_IN0 0xc0000060>, |
| /* Apalis AN1_ADC1 */ |
| <IMX8QM_ADC_IN1_DMA_ADC0_IN1 0xc0000060>, |
| /* Apalis AN1_ADC2 */ |
| <IMX8QM_ADC_IN2_DMA_ADC0_IN2 0xc0000060>, |
| /* Apalis AN1_TSWIP_ADC3 */ |
| <IMX8QM_ADC_IN3_DMA_ADC0_IN3 0xc0000060>; |
| }; |
| |
| /* Apalis AN1_TS */ |
| pinctrl_adc1: adc1grp { |
| fsl,pins = /* Apalis AN1_TSPX */ |
| <IMX8QM_ADC_IN4_DMA_ADC1_IN0 0xc0000060>, |
| /* Apalis AN1_TSMX */ |
| <IMX8QM_ADC_IN5_DMA_ADC1_IN1 0xc0000060>, |
| /* Apalis AN1_TSPY */ |
| <IMX8QM_ADC_IN6_DMA_ADC1_IN2 0xc0000060>, |
| /* Apalis AN1_TSMY */ |
| <IMX8QM_ADC_IN7_DMA_ADC1_IN3 0xc0000060>; |
| }; |
| |
| /* Apalis CAM1 */ |
| pinctrl_cam1_gpios: cam1gpiosgrp { |
| fsl,pins = /* Apalis CAM1_D7 */ |
| <IMX8QM_MIPI_DSI1_I2C0_SCL_LSIO_GPIO1_IO20 0x00000021>, |
| /* Apalis CAM1_D6 */ |
| <IMX8QM_MIPI_DSI1_I2C0_SDA_LSIO_GPIO1_IO21 0x00000021>, |
| /* Apalis CAM1_D5 */ |
| <IMX8QM_ESAI0_TX0_LSIO_GPIO2_IO26 0x00000021>, |
| /* Apalis CAM1_D4 */ |
| <IMX8QM_ESAI0_TX1_LSIO_GPIO2_IO27 0x00000021>, |
| /* Apalis CAM1_D3 */ |
| <IMX8QM_ESAI0_TX2_RX3_LSIO_GPIO2_IO28 0x00000021>, |
| /* Apalis CAM1_D2 */ |
| <IMX8QM_ESAI0_TX3_RX2_LSIO_GPIO2_IO29 0x00000021>, |
| /* Apalis CAM1_D1 */ |
| <IMX8QM_ESAI0_TX4_RX1_LSIO_GPIO2_IO30 0x00000021>, |
| /* Apalis CAM1_D0 */ |
| <IMX8QM_ESAI0_TX5_RX0_LSIO_GPIO2_IO31 0x00000021>, |
| /* Apalis CAM1_PCLK */ |
| <IMX8QM_MCLK_IN0_LSIO_GPIO3_IO00 0x00000021>, |
| /* Apalis CAM1_MCLK */ |
| <IMX8QM_SPI3_SDO_LSIO_GPIO2_IO18 0x00000021>, |
| /* Apalis CAM1_VSYNC */ |
| <IMX8QM_ESAI0_SCKR_LSIO_GPIO2_IO24 0x00000021>, |
| /* Apalis CAM1_HSYNC */ |
| <IMX8QM_ESAI0_SCKT_LSIO_GPIO2_IO25 0x00000021>; |
| }; |
| |
| /* Apalis DAP1 */ |
| pinctrl_dap1_gpios: dap1gpiosgrp { |
| fsl,pins = /* Apalis DAP1_MCLK */ |
| <IMX8QM_SPI3_SDI_LSIO_GPIO2_IO19 0x00000021>, |
| /* Apalis DAP1_D_OUT */ |
| <IMX8QM_SAI1_RXC_LSIO_GPIO3_IO12 0x00000021>, |
| /* Apalis DAP1_RESET */ |
| <IMX8QM_ESAI1_SCKT_LSIO_GPIO2_IO07 0x00000021>, |
| /* Apalis DAP1_BIT_CLK */ |
| <IMX8QM_SPI0_CS1_LSIO_GPIO3_IO06 0x00000021>, |
| /* Apalis DAP1_D_IN */ |
| <IMX8QM_SAI1_RXFS_LSIO_GPIO3_IO14 0x00000021>, |
| /* Apalis DAP1_SYNC */ |
| <IMX8QM_SPI2_CS1_LSIO_GPIO3_IO11 0x00000021>, |
| /* On-module Wi-Fi_I2S_EN# */ |
| <IMX8QM_ESAI1_TX5_RX0_LSIO_GPIO2_IO13 0x00000021>; |
| }; |
| |
| /* Apalis LCD1_G1+2 */ |
| pinctrl_esai0_gpios: esai0gpiosgrp { |
| fsl,pins = /* Apalis LCD1_G1 */ |
| <IMX8QM_ESAI0_FSR_LSIO_GPIO2_IO22 0x00000021>, |
| /* Apalis LCD1_G2 */ |
| <IMX8QM_ESAI0_FST_LSIO_GPIO2_IO23 0x00000021>; |
| }; |
| |
| /* On-module Gigabit Ethernet PHY Micrel KSZ9031 for Apalis GLAN */ |
| pinctrl_fec1: fec1grp { |
| fsl,pins = /* Use pads in 3.3V mode */ |
| <IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB_PAD 0x000014a0>, |
| <IMX8QM_ENET0_MDC_CONN_ENET0_MDC 0x06000020>, |
| <IMX8QM_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020>, |
| <IMX8QM_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x06000020>, |
| <IMX8QM_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x06000020>, |
| <IMX8QM_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x06000020>, |
| <IMX8QM_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x06000020>, |
| <IMX8QM_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x06000020>, |
| <IMX8QM_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x06000020>, |
| <IMX8QM_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x06000020>, |
| <IMX8QM_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x06000020>, |
| <IMX8QM_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x06000020>, |
| <IMX8QM_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x06000020>, |
| <IMX8QM_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x06000020>, |
| <IMX8QM_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x06000020>, |
| <IMX8QM_ENET0_REFCLK_125M_25M_CONN_ENET0_REFCLK_125M_25M 0x06000020>, |
| /* On-module ETH_RESET# */ |
| <IMX8QM_LVDS1_GPIO01_LSIO_GPIO1_IO11 0x06000020>, |
| /* On-module ETH_INT# */ |
| <IMX8QM_MIPI_CSI1_MCLK_OUT_LSIO_GPIO1_IO29 0x04000060>; |
| }; |
| |
| pinctrl_fec1_sleep: fec1-sleepgrp { |
| fsl,pins = <IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB_PAD 0x000014a0>, |
| <IMX8QM_ENET0_MDC_LSIO_GPIO4_IO14 0x04000040>, |
| <IMX8QM_ENET0_MDIO_LSIO_GPIO4_IO13 0x04000040>, |
| <IMX8QM_ENET0_RGMII_TX_CTL_LSIO_GPIO5_IO31 0x04000040>, |
| <IMX8QM_ENET0_RGMII_TXC_LSIO_GPIO5_IO30 0x04000040>, |
| <IMX8QM_ENET0_RGMII_TXD0_LSIO_GPIO6_IO00 0x04000040>, |
| <IMX8QM_ENET0_RGMII_TXD1_LSIO_GPIO6_IO01 0x04000040>, |
| <IMX8QM_ENET0_RGMII_TXD2_LSIO_GPIO6_IO02 0x04000040>, |
| <IMX8QM_ENET0_RGMII_TXD3_LSIO_GPIO6_IO03 0x04000040>, |
| <IMX8QM_ENET0_RGMII_RXC_LSIO_GPIO6_IO04 0x04000040>, |
| <IMX8QM_ENET0_RGMII_RX_CTL_LSIO_GPIO6_IO05 0x04000040>, |
| <IMX8QM_ENET0_RGMII_RXD0_LSIO_GPIO6_IO06 0x04000040>, |
| <IMX8QM_ENET0_RGMII_RXD1_LSIO_GPIO6_IO07 0x04000040>, |
| <IMX8QM_ENET0_RGMII_RXD2_LSIO_GPIO6_IO08 0x04000040>, |
| <IMX8QM_ENET0_RGMII_RXD3_LSIO_GPIO6_IO09 0x04000040>, |
| <IMX8QM_ENET0_REFCLK_125M_25M_LSIO_GPIO4_IO15 0x04000040>, |
| <IMX8QM_LVDS1_GPIO01_LSIO_GPIO1_IO11 0x06000020>, |
| <IMX8QM_MIPI_CSI1_MCLK_OUT_LSIO_GPIO1_IO29 0x04000040>; |
| }; |
| |
| /* Apalis LCD1_ */ |
| pinctrl_fec2_gpios: fec2gpiosgrp { |
| fsl,pins = <IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETA_PAD 0x000014a0>, |
| /* Apalis LCD1_R1 */ |
| <IMX8QM_ENET1_MDC_LSIO_GPIO4_IO18 0x00000021>, |
| /* Apalis LCD1_R0 */ |
| <IMX8QM_ENET1_MDIO_LSIO_GPIO4_IO17 0x00000021>, |
| /* Apalis LCD1_G0 */ |
| <IMX8QM_ENET1_REFCLK_125M_25M_LSIO_GPIO4_IO16 0x00000021>, |
| /* Apalis LCD1_R7 */ |
| <IMX8QM_ENET1_RGMII_RX_CTL_LSIO_GPIO6_IO17 0x00000021>, |
| /* Apalis LCD1_DE */ |
| <IMX8QM_ENET1_RGMII_RXD0_LSIO_GPIO6_IO18 0x00000021>, |
| /* Apalis LCD1_HSYNC */ |
| <IMX8QM_ENET1_RGMII_RXD1_LSIO_GPIO6_IO19 0x00000021>, |
| /* Apalis LCD1_VSYNC */ |
| <IMX8QM_ENET1_RGMII_RXD2_LSIO_GPIO6_IO20 0x00000021>, |
| /* Apalis LCD1_PCLK */ |
| <IMX8QM_ENET1_RGMII_RXD3_LSIO_GPIO6_IO21 0x00000021>, |
| /* Apalis LCD1_R6 */ |
| <IMX8QM_ENET1_RGMII_TX_CTL_LSIO_GPIO6_IO11 0x00000021>, |
| /* Apalis LCD1_R5 */ |
| <IMX8QM_ENET1_RGMII_TXC_LSIO_GPIO6_IO10 0x00000021>, |
| /* Apalis LCD1_R4 */ |
| <IMX8QM_ENET1_RGMII_TXD0_LSIO_GPIO6_IO12 0x00000021>, |
| /* Apalis LCD1_R3 */ |
| <IMX8QM_ENET1_RGMII_TXD1_LSIO_GPIO6_IO13 0x00000021>, |
| /* Apalis LCD1_R2 */ |
| <IMX8QM_ENET1_RGMII_TXD2_LSIO_GPIO6_IO14 0x00000021>; |
| }; |
| |
| /* Apalis CAN1 */ |
| pinctrl_flexcan1: flexcan0grp { |
| fsl,pins = <IMX8QM_FLEXCAN0_TX_DMA_FLEXCAN0_TX 0x00000021>, |
| <IMX8QM_FLEXCAN0_RX_DMA_FLEXCAN0_RX 0x00000021>; |
| }; |
| |
| /* Apalis CAN2 */ |
| pinctrl_flexcan2: flexcan1grp { |
| fsl,pins = <IMX8QM_FLEXCAN1_TX_DMA_FLEXCAN1_TX 0x00000021>, |
| <IMX8QM_FLEXCAN1_RX_DMA_FLEXCAN1_RX 0x00000021>; |
| }; |
| |
| /* Apalis CAN3 (optional) */ |
| pinctrl_flexcan3: flexcan2grp { |
| fsl,pins = <IMX8QM_FLEXCAN2_TX_DMA_FLEXCAN2_TX 0x00000021>, |
| <IMX8QM_FLEXCAN2_RX_DMA_FLEXCAN2_RX 0x00000021>; |
| }; |
| |
| /* Apalis GPIO1 */ |
| pinctrl_gpio1: gpio1grp { |
| fsl,pins = <IMX8QM_M40_GPIO0_00_LSIO_GPIO0_IO08 0x06000021>; |
| }; |
| |
| /* Apalis GPIO2 */ |
| pinctrl_gpio2: gpio2grp { |
| fsl,pins = <IMX8QM_M40_GPIO0_01_LSIO_GPIO0_IO09 0x06000021>; |
| }; |
| |
| /* Apalis GPIO3 */ |
| pinctrl_gpio3: gpio3grp { |
| fsl,pins = <IMX8QM_M41_GPIO0_00_LSIO_GPIO0_IO12 0x06000021>; |
| }; |
| |
| /* Apalis GPIO4 */ |
| pinctrl_gpio4: gpio4grp { |
| fsl,pins = <IMX8QM_M41_GPIO0_01_LSIO_GPIO0_IO13 0x06000021>; |
| }; |
| |
| /* Apalis GPIO5 */ |
| pinctrl_gpio5: gpio5grp { |
| fsl,pins = <IMX8QM_FLEXCAN2_RX_LSIO_GPIO4_IO01 0x06000021>; |
| }; |
| |
| /* Apalis GPIO6 */ |
| pinctrl_gpio6: gpio6grp { |
| fsl,pins = <IMX8QM_FLEXCAN2_TX_LSIO_GPIO4_IO02 0x00000021>; |
| }; |
| |
| /* Apalis GPIO7 */ |
| pinctrl_gpio7: gpio7grp { |
| fsl,pins = <IMX8QM_MLB_SIG_LSIO_GPIO3_IO26 0x00000021>; |
| }; |
| |
| /* Apalis GPIO8 */ |
| pinctrl_gpio8: gpio8grp { |
| fsl,pins = <IMX8QM_MLB_DATA_LSIO_GPIO3_IO28 0x00000021>; |
| }; |
| |
| /* Apalis BKL1_ON */ |
| pinctrl_gpio_bkl_on: gpiobklongrp { |
| fsl,pins = <IMX8QM_LVDS0_GPIO00_LSIO_GPIO1_IO04 0x00000021>; |
| }; |
| |
| /* Apalis WAKE1_MICO */ |
| pinctrl_gpio_keys: gpiokeysgrp { |
| fsl,pins = <IMX8QM_SPI3_CS0_LSIO_GPIO2_IO20 0x06700021>; |
| }; |
| |
| /* Apalis USBH_OC# */ |
| pinctrl_gpio_usbh_oc_n: gpiousbhocngrp { |
| fsl,pins = <IMX8QM_USB_SS3_TC3_LSIO_GPIO4_IO06 0x04000021>; |
| }; |
| |
| /* On-module HDMI_CTRL */ |
| pinctrl_hdmi_ctrl: hdmictrlgrp { |
| fsl,pins = <IMX8QM_MIPI_CSI1_GPIO0_00_LSIO_GPIO1_IO30 0x00000061>; |
| }; |
| |
| /* On-module I2C */ |
| pinctrl_lpi2c1: lpi2c1grp { |
| fsl,pins = <IMX8QM_GPT0_CLK_DMA_I2C1_SCL 0x04000020>, |
| <IMX8QM_GPT0_CAPTURE_DMA_I2C1_SDA 0x04000020>; |
| }; |
| |
| /* Apalis I2C1 */ |
| pinctrl_lpi2c2: lpi2c2grp { |
| fsl,pins = <IMX8QM_GPT1_CLK_DMA_I2C2_SCL 0x04000020>, |
| <IMX8QM_GPT1_CAPTURE_DMA_I2C2_SDA 0x04000020>; |
| }; |
| |
| /* Apalis I2C3 (CAM) */ |
| pinctrl_lpi2c3: lpi2c3grp { |
| fsl,pins = <IMX8QM_SIM0_PD_DMA_I2C3_SCL 0x04000020>, |
| <IMX8QM_SIM0_POWER_EN_DMA_I2C3_SDA 0x04000020>; |
| }; |
| |
| /* Apalis SPI1 */ |
| pinctrl_lpspi0: lpspi0grp { |
| fsl,pins = <IMX8QM_SPI0_SCK_DMA_SPI0_SCK 0x0600004c>, |
| <IMX8QM_SPI0_SDO_DMA_SPI0_SDO 0x0600004c>, |
| <IMX8QM_SPI0_SDI_DMA_SPI0_SDI 0x0600004c>, |
| <IMX8QM_SPI0_CS0_LSIO_GPIO3_IO05 0x0600004c>; |
| }; |
| |
| /* Apalis SPI2 */ |
| pinctrl_lpspi2: lpspi2grp { |
| fsl,pins = <IMX8QM_SPI2_SCK_DMA_SPI2_SCK 0x0600004c>, |
| <IMX8QM_SPI2_SDO_DMA_SPI2_SDO 0x0600004c>, |
| <IMX8QM_SPI2_SDI_DMA_SPI2_SDI 0x0600004c>, |
| <IMX8QM_SPI2_CS0_LSIO_GPIO3_IO10 0x0600004c>; |
| }; |
| |
| /* Apalis UART3 */ |
| pinctrl_lpuart0: lpuart0grp { |
| fsl,pins = <IMX8QM_UART0_RX_DMA_UART0_RX 0x06000020>, |
| <IMX8QM_UART0_TX_DMA_UART0_TX 0x06000020>; |
| }; |
| |
| /* Apalis UART1 */ |
| pinctrl_lpuart1: lpuart1grp { |
| fsl,pins = <IMX8QM_UART1_RX_DMA_UART1_RX 0x06000020>, |
| <IMX8QM_UART1_TX_DMA_UART1_TX 0x06000020>, |
| <IMX8QM_UART1_CTS_B_DMA_UART1_CTS_B 0x06000020>, |
| <IMX8QM_UART1_RTS_B_DMA_UART1_RTS_B 0x06000020>; |
| }; |
| |
| /* Apalis UART1 */ |
| pinctrl_lpuart1ctrl: lpuart1ctrlgrp { |
| fsl,pins = /* Apalis UART1_DTR */ |
| <IMX8QM_M40_I2C0_SCL_LSIO_GPIO0_IO06 0x00000021>, |
| /* Apalis UART1_DSR */ |
| <IMX8QM_M40_I2C0_SDA_LSIO_GPIO0_IO07 0x00000021>, |
| /* Apalis UART1_DCD */ |
| <IMX8QM_M41_I2C0_SCL_LSIO_GPIO0_IO10 0x00000021>, |
| /* Apalis UART1_RI */ |
| <IMX8QM_M41_I2C0_SDA_LSIO_GPIO0_IO11 0x00000021>; |
| }; |
| |
| /* Apalis UART4 */ |
| pinctrl_lpuart2: lpuart2grp { |
| fsl,pins = <IMX8QM_LVDS0_I2C1_SCL_DMA_UART2_TX 0x06000020>, |
| <IMX8QM_LVDS0_I2C1_SDA_DMA_UART2_RX 0x06000020>; |
| }; |
| |
| /* Apalis UART2 */ |
| pinctrl_lpuart3: lpuart3grp { |
| fsl,pins = <IMX8QM_LVDS1_I2C1_SCL_DMA_UART3_TX 0x06000020>, |
| <IMX8QM_LVDS1_I2C1_SDA_DMA_UART3_RX 0x06000020>, |
| <IMX8QM_ENET1_RGMII_TXD3_DMA_UART3_RTS_B 0x06000020>, |
| <IMX8QM_ENET1_RGMII_RXC_DMA_UART3_CTS_B 0x06000020>; |
| }; |
| |
| /* Apalis TS_2 */ |
| pinctrl_lvds0_i2c0_gpio: lvds0i2c0gpiogrp { |
| fsl,pins = <IMX8QM_LVDS0_I2C0_SCL_LSIO_GPIO1_IO06 0x00000021>; |
| }; |
| |
| /* Apalis LCD1_G6+7 */ |
| pinctrl_lvds1_i2c0_gpios: lvds1i2c0gpiosgrp { |
| fsl,pins = /* Apalis LCD1_G6 */ |
| <IMX8QM_LVDS1_I2C0_SCL_LSIO_GPIO1_IO12 0x00000021>, |
| /* Apalis LCD1_G7 */ |
| <IMX8QM_LVDS1_I2C0_SDA_LSIO_GPIO1_IO13 0x00000021>; |
| }; |
| |
| /* Apalis TS_3 */ |
| pinctrl_mipi_dsi_0_1_en: mipidsi0-1engrp { |
| fsl,pins = <IMX8QM_LVDS0_I2C0_SDA_LSIO_GPIO1_IO07 0x00000021>; |
| }; |
| |
| /* Apalis TS_4 */ |
| pinctrl_mipi_dsi1_gpios: mipidsi1gpiosgrp { |
| fsl,pins = <IMX8QM_MIPI_DSI1_GPIO0_00_LSIO_GPIO1_IO22 0x00000021>; |
| }; |
| |
| /* Apalis TS_1 */ |
| pinctrl_mlb_gpios: mlbgpiosgrp { |
| fsl,pins = <IMX8QM_MLB_CLK_LSIO_GPIO3_IO27 0x00000021>; |
| }; |
| |
| /* Apalis MMC1_CD# */ |
| pinctrl_mmc1_cd: mmc1cdgrp { |
| fsl,pins = <IMX8QM_ESAI1_TX1_LSIO_GPIO2_IO09 0x00000021>; |
| }; |
| |
| pinctrl_mmc1_cd_sleep: mmc1cdsleepgrp { |
| fsl,pins = <IMX8QM_ESAI1_TX1_LSIO_GPIO2_IO09 0x04000021>; |
| }; |
| |
| /* On-module PCIe_Wi-Fi */ |
| pinctrl_pcieb: pciebgrp { |
| fsl,pins = <IMX8QM_PCIE_CTRL1_CLKREQ_B_LSIO_GPIO4_IO30 0x00000021>, |
| <IMX8QM_PCIE_CTRL1_WAKE_B_LSIO_GPIO4_IO31 0x00000021>, |
| <IMX8QM_PCIE_CTRL1_PERST_B_LSIO_GPIO5_IO00 0x00000021>; |
| }; |
| |
| /* On-module PCIe_CLK_EN1 */ |
| pinctrl_pcie_sata_refclk: pciesatarefclkgrp { |
| fsl,pins = <IMX8QM_USDHC2_WP_LSIO_GPIO4_IO11 0x00000021>; |
| }; |
| |
| /* On-module PCIe_CLK_EN2 */ |
| pinctrl_pcie_wifi_refclk: pciewifirefclkgrp { |
| fsl,pins = <IMX8QM_ESAI1_TX3_RX2_LSIO_GPIO2_IO11 0x00000021>; |
| }; |
| |
| /* Apalis PWM3 */ |
| pinctrl_pwm0: pwm0grp { |
| fsl,pins = <IMX8QM_UART0_RTS_B_LSIO_PWM0_OUT 0x00000020>; |
| }; |
| |
| /* Apalis PWM4 */ |
| pinctrl_pwm1: pwm1grp { |
| fsl,pins = <IMX8QM_UART0_CTS_B_LSIO_PWM1_OUT 0x00000020>; |
| }; |
| |
| /* Apalis PWM1 */ |
| pinctrl_pwm2: pwm2grp { |
| fsl,pins = <IMX8QM_GPT1_COMPARE_LSIO_PWM2_OUT 0x00000020>; |
| }; |
| |
| /* Apalis PWM2 */ |
| pinctrl_pwm3: pwm3grp { |
| fsl,pins = <IMX8QM_GPT0_COMPARE_LSIO_PWM3_OUT 0x00000020>; |
| }; |
| |
| /* Apalis BKL1_PWM */ |
| pinctrl_pwm_bkl: pwmbklgrp { |
| fsl,pins = <IMX8QM_LVDS1_GPIO00_LVDS1_PWM0_OUT 0x00000020>; |
| }; |
| |
| /* Apalis LCD1_ */ |
| pinctrl_qspi1a_gpios: qspi1agpiosgrp { |
| fsl,pins = /* Apalis LCD1_B0 */ |
| <IMX8QM_QSPI1A_DATA0_LSIO_GPIO4_IO26 0x00000021>, |
| /* Apalis LCD1_B1 */ |
| <IMX8QM_QSPI1A_DATA1_LSIO_GPIO4_IO25 0x00000021>, |
| /* Apalis LCD1_B2 */ |
| <IMX8QM_QSPI1A_DATA2_LSIO_GPIO4_IO24 0x00000021>, |
| /* Apalis LCD1_B3 */ |
| <IMX8QM_QSPI1A_DATA3_LSIO_GPIO4_IO23 0x00000021>, |
| /* Apalis LCD1_B5 */ |
| <IMX8QM_QSPI1A_DQS_LSIO_GPIO4_IO22 0x00000021>, |
| /* Apalis LCD1_B7 */ |
| <IMX8QM_QSPI1A_SCLK_LSIO_GPIO4_IO21 0x00000021>, |
| /* Apalis LCD1_B4 */ |
| <IMX8QM_QSPI1A_SS0_B_LSIO_GPIO4_IO19 0x00000021>, |
| /* Apalis LCD1_B6 */ |
| <IMX8QM_QSPI1A_SS1_B_LSIO_GPIO4_IO20 0x00000021>; |
| }; |
| |
| /* On-module RESET_MOCI#_DRV */ |
| pinctrl_reset_moci: resetmocigrp { |
| fsl,pins = <IMX8QM_SCU_GPIO0_02_LSIO_GPIO0_IO30 0x00000021>; |
| }; |
| |
| /* On-module I2S SGTL5000 for Apalis Analogue Audio */ |
| pinctrl_sai1: sai1grp { |
| fsl,pins = <IMX8QM_SAI1_TXD_AUD_SAI1_TXD 0xc600006c>, |
| <IMX8QM_SAI1_RXD_AUD_SAI1_RXD 0xc600004c>, |
| <IMX8QM_SAI1_TXC_AUD_SAI1_TXC 0xc600004c>, |
| <IMX8QM_SAI1_TXFS_AUD_SAI1_TXFS 0xc600004c>; |
| }; |
| |
| /* Apalis SATA1_ACT# */ |
| pinctrl_sata1_act: sata1actgrp { |
| fsl,pins = <IMX8QM_ESAI1_TX0_LSIO_GPIO2_IO08 0x00000021>; |
| }; |
| |
| /* Apalis SD1_CD# */ |
| pinctrl_sd1_cd: sd1cdgrp { |
| fsl,pins = <IMX8QM_USDHC2_CD_B_LSIO_GPIO4_IO12 0x00000021>; |
| }; |
| |
| /* On-module I2S SGTL5000 SYS_MCLK */ |
| pinctrl_sgtl5000: sgtl5000grp { |
| fsl,pins = <IMX8QM_MCLK_OUT0_AUD_ACM_MCLK_OUT0 0xc600004c>; |
| }; |
| |
| /* Apalis LCD1_ */ |
| pinctrl_sim0_gpios: sim0gpiosgrp { |
| fsl,pins = /* Apalis LCD1_G5 */ |
| <IMX8QM_SIM0_CLK_LSIO_GPIO0_IO00 0x00000021>, |
| /* Apalis LCD1_G3 */ |
| <IMX8QM_SIM0_GPIO0_00_LSIO_GPIO0_IO05 0x00000021>, |
| /* Apalis TS_5 */ |
| <IMX8QM_SIM0_IO_LSIO_GPIO0_IO02 0x00000021>, |
| /* Apalis LCD1_G4 */ |
| <IMX8QM_SIM0_RST_LSIO_GPIO0_IO01 0x00000021>; |
| }; |
| |
| /* Apalis SPDIF */ |
| pinctrl_spdif0: spdif0grp { |
| fsl,pins = <IMX8QM_SPDIF0_TX_AUD_SPDIF0_TX 0xc6000040>, |
| <IMX8QM_SPDIF0_RX_AUD_SPDIF0_RX 0xc6000040>; |
| }; |
| |
| pinctrl_touchctrl_gpios: touchctrlgpiosgrp { |
| fsl,pins = <IMX8QM_ESAI1_FSR_LSIO_GPIO2_IO04 0x00000021>, |
| <IMX8QM_ESAI1_FST_LSIO_GPIO2_IO05 0x00000041>, |
| <IMX8QM_SPI3_SCK_LSIO_GPIO2_IO17 0x00000021>, |
| <IMX8QM_SPI3_CS1_LSIO_GPIO2_IO21 0x00000041>; |
| }; |
| |
| pinctrl_touchctrl_idle: touchctrlidlegrp { |
| fsl,pins = <IMX8QM_ADC_IN4_LSIO_GPIO3_IO22 0x00000021>, |
| <IMX8QM_ADC_IN5_LSIO_GPIO3_IO23 0x00000021>, |
| <IMX8QM_ADC_IN6_LSIO_GPIO3_IO24 0x00000021>, |
| <IMX8QM_ADC_IN7_LSIO_GPIO3_IO25 0x00000021>; |
| }; |
| |
| /* On-module USB HSIC HUB (active) */ |
| pinctrl_usb_hsic_active: usbh1activegrp { |
| fsl,pins = <IMX8QM_USB_HSIC0_DATA_CONN_USB_HSIC0_DATA 0x000000cf>, |
| <IMX8QM_USB_HSIC0_STROBE_CONN_USB_HSIC0_STROBE 0x000000ff>; |
| }; |
| |
| /* On-module USB HSIC HUB (idle) */ |
| pinctrl_usb_hsic_idle: usbh1idlegrp { |
| fsl,pins = <IMX8QM_USB_HSIC0_DATA_CONN_USB_HSIC0_DATA 0x000000cf>, |
| <IMX8QM_USB_HSIC0_STROBE_CONN_USB_HSIC0_STROBE 0x000000cf>; |
| }; |
| |
| /* On-module USB HSIC HUB */ |
| pinctrl_usb3503a: usb3503agrp { |
| fsl,pins = /* On-module HSIC_HUB_CONNECT */ |
| <IMX8QM_SCU_GPIO0_03_LSIO_GPIO0_IO31 0x00000041>, |
| /* On-module HSIC_INT_N */ |
| <IMX8QM_SCU_GPIO0_05_LSIO_GPIO1_IO01 0x00000021>, |
| /* On-module HSIC_RESET_N */ |
| <IMX8QM_SCU_GPIO0_06_LSIO_GPIO1_IO02 0x00000041>; |
| }; |
| |
| /* Apalis USBH_EN */ |
| pinctrl_usbh_en: usbhengrp { |
| fsl,pins = <IMX8QM_USB_SS3_TC1_LSIO_GPIO4_IO04 0x00000021>; |
| }; |
| |
| /* Apalis USBO1 */ |
| pinctrl_usbotg1: usbotg1grp { |
| fsl,pins = /* Apalis USBO1_EN */ |
| <IMX8QM_USB_SS3_TC0_CONN_USB_OTG1_PWR 0x00000021>, |
| /* Apalis USBO1_OC# */ |
| <IMX8QM_USB_SS3_TC2_CONN_USB_OTG1_OC 0x04000021>; |
| }; |
| |
| /* On-module eMMC */ |
| pinctrl_usdhc1: usdhc1grp { |
| fsl,pins = <IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041>, |
| <IMX8QM_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021>, |
| <IMX8QM_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021>, |
| <IMX8QM_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021>, |
| <IMX8QM_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021>, |
| <IMX8QM_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021>, |
| <IMX8QM_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021>, |
| <IMX8QM_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021>, |
| <IMX8QM_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021>, |
| <IMX8QM_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021>, |
| <IMX8QM_EMMC0_STROBE_CONN_EMMC0_STROBE 0x06000041>, |
| <IMX8QM_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x00000021>; |
| }; |
| |
| pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { |
| fsl,pins = <IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK 0x06000040>, |
| <IMX8QM_EMMC0_CMD_CONN_EMMC0_CMD 0x00000020>, |
| <IMX8QM_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000020>, |
| <IMX8QM_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000020>, |
| <IMX8QM_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000020>, |
| <IMX8QM_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000020>, |
| <IMX8QM_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000020>, |
| <IMX8QM_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000020>, |
| <IMX8QM_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000020>, |
| <IMX8QM_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000020>, |
| <IMX8QM_EMMC0_STROBE_CONN_EMMC0_STROBE 0x06000040>, |
| <IMX8QM_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x00000020>; |
| }; |
| |
| pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { |
| fsl,pins = <IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK 0x06000040>, |
| <IMX8QM_EMMC0_CMD_CONN_EMMC0_CMD 0x00000020>, |
| <IMX8QM_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000020>, |
| <IMX8QM_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000020>, |
| <IMX8QM_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000020>, |
| <IMX8QM_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000020>, |
| <IMX8QM_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000020>, |
| <IMX8QM_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000020>, |
| <IMX8QM_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000020>, |
| <IMX8QM_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000020>, |
| <IMX8QM_EMMC0_STROBE_CONN_EMMC0_STROBE 0x06000040>, |
| <IMX8QM_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x00000020>; |
| }; |
| |
| /* Apalis TS_6 */ |
| pinctrl_usdhc1_gpios: usdhc1gpiosgrp { |
| fsl,pins = <IMX8QM_USDHC1_STROBE_LSIO_GPIO5_IO23 0x00000021>; |
| }; |
| |
| /* Apalis MMC1 */ |
| pinctrl_usdhc2_4bit: usdhc2grp4bitgrp { |
| fsl,pins = <IMX8QM_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041>, |
| <IMX8QM_USDHC1_CMD_CONN_USDHC1_CMD 0x00000021>, |
| <IMX8QM_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000021>, |
| <IMX8QM_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000021>, |
| <IMX8QM_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000021>, |
| <IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000021>, |
| /* On-module PMIC use */ |
| <IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021>; |
| }; |
| |
| pinctrl_usdhc2_4bit_100mhz: usdhc2-4bit100mhzgrp { |
| fsl,pins = <IMX8QM_USDHC1_CLK_CONN_USDHC1_CLK 0x06000040>, |
| <IMX8QM_USDHC1_CMD_CONN_USDHC1_CMD 0x00000020>, |
| <IMX8QM_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000020>, |
| <IMX8QM_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000020>, |
| <IMX8QM_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000020>, |
| <IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000020>, |
| /* On-module PMIC use */ |
| <IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021>; |
| }; |
| |
| pinctrl_usdhc2_4bit_200mhz: usdhc2-4bit200mhzgrp { |
| fsl,pins = <IMX8QM_USDHC1_CLK_CONN_USDHC1_CLK 0x06000040>, |
| <IMX8QM_USDHC1_CMD_CONN_USDHC1_CMD 0x00000020>, |
| <IMX8QM_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000020>, |
| <IMX8QM_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000020>, |
| <IMX8QM_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000020>, |
| <IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000020>, |
| /* On-module PMIC use */ |
| <IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021>; |
| }; |
| |
| pinctrl_usdhc2_8bit: usdhc2grp8bitgrp { |
| fsl,pins = <IMX8QM_USDHC1_DATA4_CONN_USDHC1_DATA4 0x00000021>, |
| <IMX8QM_USDHC1_DATA5_CONN_USDHC1_DATA5 0x00000021>, |
| <IMX8QM_USDHC1_DATA6_CONN_USDHC1_DATA6 0x00000021>, |
| <IMX8QM_USDHC1_DATA7_CONN_USDHC1_DATA7 0x00000021>; |
| }; |
| |
| pinctrl_usdhc2_8bit_100mhz: usdhc2-8bit100mhzgrp { |
| fsl,pins = <IMX8QM_USDHC1_DATA4_CONN_USDHC1_DATA4 0x00000020>, |
| <IMX8QM_USDHC1_DATA5_CONN_USDHC1_DATA5 0x00000020>, |
| <IMX8QM_USDHC1_DATA6_CONN_USDHC1_DATA6 0x00000020>, |
| <IMX8QM_USDHC1_DATA7_CONN_USDHC1_DATA7 0x00000020>; |
| }; |
| |
| pinctrl_usdhc2_8bit_200mhz: usdhc2-8bit200mhzgrp { |
| fsl,pins = <IMX8QM_USDHC1_DATA4_CONN_USDHC1_DATA4 0x00000020>, |
| <IMX8QM_USDHC1_DATA5_CONN_USDHC1_DATA5 0x00000020>, |
| <IMX8QM_USDHC1_DATA6_CONN_USDHC1_DATA6 0x00000020>, |
| <IMX8QM_USDHC1_DATA7_CONN_USDHC1_DATA7 0x00000020>; |
| }; |
| |
| pinctrl_usdhc2_4bit_sleep: usdhc2-4bitsleepgrp { |
| fsl,pins = <IMX8QM_USDHC1_CLK_CONN_USDHC1_CLK 0x04000061>, |
| <IMX8QM_USDHC1_CMD_CONN_USDHC1_CMD 0x04000061>, |
| <IMX8QM_USDHC1_DATA0_CONN_USDHC1_DATA0 0x04000061>, |
| <IMX8QM_USDHC1_DATA1_CONN_USDHC1_DATA1 0x04000061>, |
| <IMX8QM_USDHC1_DATA2_CONN_USDHC1_DATA2 0x04000061>, |
| <IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3 0x04000061>, |
| /* On-module PMIC use */ |
| <IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021>; |
| }; |
| |
| pinctrl_usdhc2_8bit_sleep: usdhc2-8bitsleepgrp { |
| fsl,pins = <IMX8QM_USDHC1_DATA4_CONN_USDHC1_DATA4 0x04000061>, |
| <IMX8QM_USDHC1_DATA5_CONN_USDHC1_DATA5 0x04000061>, |
| <IMX8QM_USDHC1_DATA6_CONN_USDHC1_DATA6 0x04000061>, |
| <IMX8QM_USDHC1_DATA7_CONN_USDHC1_DATA7 0x04000061>; |
| }; |
| |
| /* Apalis SD1 */ |
| pinctrl_usdhc3: usdhc3grp { |
| fsl,pins = <IMX8QM_USDHC2_CLK_CONN_USDHC2_CLK 0x06000041>, |
| <IMX8QM_USDHC2_CMD_CONN_USDHC2_CMD 0x00000021>, |
| <IMX8QM_USDHC2_DATA0_CONN_USDHC2_DATA0 0x00000021>, |
| <IMX8QM_USDHC2_DATA1_CONN_USDHC2_DATA1 0x00000021>, |
| <IMX8QM_USDHC2_DATA2_CONN_USDHC2_DATA2 0x00000021>, |
| <IMX8QM_USDHC2_DATA3_CONN_USDHC2_DATA3 0x00000021>, |
| /* On-module PMIC use */ |
| <IMX8QM_USDHC2_VSELECT_CONN_USDHC2_VSELECT 0x00000021>; |
| }; |
| |
| pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { |
| fsl,pins = <IMX8QM_USDHC2_CLK_CONN_USDHC2_CLK 0x06000041>, |
| <IMX8QM_USDHC2_CMD_CONN_USDHC2_CMD 0x00000021>, |
| <IMX8QM_USDHC2_DATA0_CONN_USDHC2_DATA0 0x00000021>, |
| <IMX8QM_USDHC2_DATA1_CONN_USDHC2_DATA1 0x00000021>, |
| <IMX8QM_USDHC2_DATA2_CONN_USDHC2_DATA2 0x00000021>, |
| <IMX8QM_USDHC2_DATA3_CONN_USDHC2_DATA3 0x00000021>, |
| /* On-module PMIC use */ |
| <IMX8QM_USDHC2_VSELECT_CONN_USDHC2_VSELECT 0x00000021>; |
| }; |
| |
| pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { |
| fsl,pins = <IMX8QM_USDHC2_CLK_CONN_USDHC2_CLK 0x06000041>, |
| <IMX8QM_USDHC2_CMD_CONN_USDHC2_CMD 0x00000021>, |
| <IMX8QM_USDHC2_DATA0_CONN_USDHC2_DATA0 0x00000021>, |
| <IMX8QM_USDHC2_DATA1_CONN_USDHC2_DATA1 0x00000021>, |
| <IMX8QM_USDHC2_DATA2_CONN_USDHC2_DATA2 0x00000021>, |
| <IMX8QM_USDHC2_DATA3_CONN_USDHC2_DATA3 0x00000021>, |
| /* On-module PMIC use */ |
| <IMX8QM_USDHC2_VSELECT_CONN_USDHC2_VSELECT 0x00000021>; |
| }; |
| |
| /* On-module Wi-Fi */ |
| pinctrl_wifi: wifigrp { |
| fsl,pins = /* On-module Wi-Fi_SUSCLK_32k */ |
| <IMX8QM_SCU_GPIO0_07_SCU_DSC_RTC_CLOCK_OUTPUT_32K 0x06000021>, |
| /* On-module Wi-Fi_PCIE_W_DISABLE */ |
| <IMX8QM_MIPI_CSI0_MCLK_OUT_LSIO_GPIO1_IO24 0x06000021>; |
| }; |
| |
| pinctrl_wifi_pdn: wifipdngrp { |
| fsl,pins = /* On-module Wi-Fi_POWER_DOWN */ |
| <IMX8QM_MIPI_CSI0_GPIO0_01_LSIO_GPIO1_IO28 0x06000021>; |
| }; |
| }; |