| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Test the powerpc alignment handler on POWER8/POWER9 |
| * |
| * Copyright (C) 2017 IBM Corporation (Michael Neuling, Andrew Donnellan) |
| */ |
| |
| /* |
| * This selftest exercises the powerpc alignment fault handler. |
| * |
| * We create two sets of source and destination buffers, one in regular memory, |
| * the other cache-inhibited (by default we use /dev/fb0 for this, but an |
| * alterative path for cache-inhibited memory may be provided). |
| * |
| * One way to get cache-inhibited memory is to use the "mem" kernel parameter |
| * to limit the kernel to less memory than actually exists. Addresses above |
| * the limit may still be accessed but will be treated as cache-inhibited. For |
| * example, if there is actually 4GB of memory and the parameter "mem=3GB" is |
| * used, memory from address 0xC0000000 onwards is treated as cache-inhibited. |
| * To access this region /dev/mem is used. The kernel should be configured |
| * without CONFIG_STRICT_DEVMEM. In this case use: |
| * ./alignment_handler /dev/mem 0xc0000000 |
| * |
| * We initialise the source buffers, then use whichever set of load/store |
| * instructions is under test to copy bytes from the source buffers to the |
| * destination buffers. For the regular buffers, these instructions will |
| * execute normally. For the cache-inhibited buffers, these instructions |
| * will trap and cause an alignment fault, and the alignment fault handler |
| * will emulate the particular instruction under test. We then compare the |
| * destination buffers to ensure that the native and emulated cases give the |
| * same result. |
| * |
| * TODO: |
| * - Any FIXMEs below |
| * - Test VSX regs < 32 and > 32 |
| * - Test all loads and stores |
| * - Check update forms do update register |
| * - Test alignment faults over page boundary |
| * |
| * Some old binutils may not support all the instructions. |
| */ |
| |
| |
| #include <sys/mman.h> |
| #include <sys/types.h> |
| #include <sys/stat.h> |
| #include <fcntl.h> |
| #include <unistd.h> |
| #include <stdbool.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <assert.h> |
| #include <getopt.h> |
| #include <setjmp.h> |
| #include <signal.h> |
| |
| #include "utils.h" |
| #include "instructions.h" |
| |
| int bufsize; |
| int debug; |
| int testing; |
| volatile int gotsig; |
| bool prefixes_enabled; |
| char *cipath = "/dev/fb0"; |
| long cioffset; |
| |
| void sighandler(int sig, siginfo_t *info, void *ctx) |
| { |
| ucontext_t *ucp = ctx; |
| |
| if (!testing) { |
| signal(sig, SIG_DFL); |
| kill(0, sig); |
| } |
| gotsig = sig; |
| #ifdef __powerpc64__ |
| if (prefixes_enabled) { |
| u32 inst = *(u32 *)ucp->uc_mcontext.gp_regs[PT_NIP]; |
| ucp->uc_mcontext.gp_regs[PT_NIP] += ((inst >> 26 == 1) ? 8 : 4); |
| } else { |
| ucp->uc_mcontext.gp_regs[PT_NIP] += 4; |
| } |
| #else |
| ucp->uc_mcontext.uc_regs->gregs[PT_NIP] += 4; |
| #endif |
| } |
| |
| #define XFORM(reg, n) " " #reg " ,%"#n",%2 ;" |
| #define DFORM(reg, n) " " #reg " ,0(%"#n") ;" |
| |
| #define TEST(name, ld_op, st_op, form, ld_reg, st_reg) \ |
| void test_##name(char *s, char *d) \ |
| { \ |
| asm volatile( \ |
| #ld_op form(ld_reg, 0) \ |
| #st_op form(st_reg, 1) \ |
| :: "r"(s), "r"(d), "r"(0) \ |
| : "memory", "vs0", "vs32", "r31"); \ |
| } \ |
| rc |= do_test(#name, test_##name) |
| |
| #define TESTP(name, ld_op, st_op, ld_reg, st_reg) \ |
| void test_##name(char *s, char *d) \ |
| { \ |
| asm volatile( \ |
| ld_op(ld_reg, %0, 0, 0) \ |
| st_op(st_reg, %1, 0, 0) \ |
| :: "r"(s), "r"(d), "r"(0) \ |
| : "memory", "vs0", "vs32", "r31"); \ |
| } \ |
| rc |= do_test(#name, test_##name) |
| |
| #define LOAD_VSX_XFORM_TEST(op) TEST(op, op, stxvd2x, XFORM, 32, 32) |
| #define STORE_VSX_XFORM_TEST(op) TEST(op, lxvd2x, op, XFORM, 32, 32) |
| #define LOAD_VSX_DFORM_TEST(op) TEST(op, op, stxv, DFORM, 32, 32) |
| #define STORE_VSX_DFORM_TEST(op) TEST(op, lxv, op, DFORM, 32, 32) |
| #define LOAD_VMX_XFORM_TEST(op) TEST(op, op, stxvd2x, XFORM, 0, 32) |
| #define STORE_VMX_XFORM_TEST(op) TEST(op, lxvd2x, op, XFORM, 32, 0) |
| #define LOAD_VMX_DFORM_TEST(op) TEST(op, op, stxv, DFORM, 0, 32) |
| #define STORE_VMX_DFORM_TEST(op) TEST(op, lxv, op, DFORM, 32, 0) |
| |
| #define LOAD_XFORM_TEST(op) TEST(op, op, stdx, XFORM, 31, 31) |
| #define STORE_XFORM_TEST(op) TEST(op, ldx, op, XFORM, 31, 31) |
| #define LOAD_DFORM_TEST(op) TEST(op, op, std, DFORM, 31, 31) |
| #define STORE_DFORM_TEST(op) TEST(op, ld, op, DFORM, 31, 31) |
| |
| #define LOAD_FLOAT_DFORM_TEST(op) TEST(op, op, stfd, DFORM, 0, 0) |
| #define STORE_FLOAT_DFORM_TEST(op) TEST(op, lfd, op, DFORM, 0, 0) |
| #define LOAD_FLOAT_XFORM_TEST(op) TEST(op, op, stfdx, XFORM, 0, 0) |
| #define STORE_FLOAT_XFORM_TEST(op) TEST(op, lfdx, op, XFORM, 0, 0) |
| |
| #define LOAD_MLS_PREFIX_TEST(op) TESTP(op, op, PSTD, 31, 31) |
| #define STORE_MLS_PREFIX_TEST(op) TESTP(op, PLD, op, 31, 31) |
| |
| #define LOAD_8LS_PREFIX_TEST(op) TESTP(op, op, PSTD, 31, 31) |
| #define STORE_8LS_PREFIX_TEST(op) TESTP(op, PLD, op, 31, 31) |
| |
| #define LOAD_FLOAT_MLS_PREFIX_TEST(op) TESTP(op, op, PSTFD, 0, 0) |
| #define STORE_FLOAT_MLS_PREFIX_TEST(op) TESTP(op, PLFD, op, 0, 0) |
| |
| #define LOAD_VSX_8LS_PREFIX_TEST(op, tail) TESTP(op, op, PSTXV ## tail, 0, 32) |
| #define STORE_VSX_8LS_PREFIX_TEST(op, tail) TESTP(op, PLXV ## tail, op, 32, 0) |
| |
| /* FIXME: Unimplemented tests: */ |
| // STORE_DFORM_TEST(stq) /* FIXME: need two registers for quad */ |
| // STORE_DFORM_TEST(stswi) /* FIXME: string instruction */ |
| |
| // STORE_XFORM_TEST(stwat) /* AMO can't emulate or run on CI */ |
| // STORE_XFORM_TEST(stdat) /* ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ */ |
| |
| |
| /* preload byte by byte */ |
| void preload_data(void *dst, int offset, int width) |
| { |
| char *c = dst; |
| int i; |
| |
| c += offset; |
| |
| for (i = 0 ; i < width ; i++) |
| c[i] = i; |
| } |
| |
| int test_memcpy(void *dst, void *src, int size, int offset, |
| void (*test_func)(char *, char *)) |
| { |
| char *s, *d; |
| |
| s = src; |
| s += offset; |
| d = dst; |
| d += offset; |
| |
| assert(size == 16); |
| gotsig = 0; |
| testing = 1; |
| |
| test_func(s, d); /* run the actual test */ |
| |
| testing = 0; |
| if (gotsig) { |
| if (debug) |
| printf(" Got signal %i\n", gotsig); |
| return 1; |
| } |
| return 0; |
| } |
| |
| void dumpdata(char *s1, char *s2, int n, char *test_name) |
| { |
| int i; |
| |
| printf(" %s: unexpected result:\n", test_name); |
| printf(" mem:"); |
| for (i = 0; i < n; i++) |
| printf(" %02x", s1[i]); |
| printf("\n"); |
| printf(" ci: "); |
| for (i = 0; i < n; i++) |
| printf(" %02x", s2[i]); |
| printf("\n"); |
| } |
| |
| int test_memcmp(void *s1, void *s2, int n, int offset, char *test_name) |
| { |
| char *s1c, *s2c; |
| |
| s1c = s1; |
| s1c += offset; |
| s2c = s2; |
| s2c += offset; |
| |
| if (memcmp(s1c, s2c, n)) { |
| if (debug) { |
| printf("\n Compare failed. Offset:%i length:%i\n", |
| offset, n); |
| dumpdata(s1c, s2c, n, test_name); |
| } |
| return 1; |
| } |
| return 0; |
| } |
| |
| /* |
| * Do two memcpy tests using the same instructions. One cachable |
| * memory and the other doesn't. |
| */ |
| int do_test(char *test_name, void (*test_func)(char *, char *)) |
| { |
| int offset, width, fd, rc, r; |
| void *mem0, *mem1, *ci0, *ci1; |
| |
| printf("\tDoing %s:\t", test_name); |
| |
| fd = open(cipath, O_RDWR); |
| if (fd < 0) { |
| printf("\n"); |
| perror("Can't open ci file now?"); |
| return 1; |
| } |
| |
| ci0 = mmap(NULL, bufsize, PROT_WRITE | PROT_READ, MAP_SHARED, |
| fd, cioffset); |
| ci1 = mmap(NULL, bufsize, PROT_WRITE | PROT_READ, MAP_SHARED, |
| fd, cioffset + bufsize); |
| |
| if ((ci0 == MAP_FAILED) || (ci1 == MAP_FAILED)) { |
| printf("\n"); |
| perror("mmap failed"); |
| SKIP_IF(1); |
| } |
| |
| rc = posix_memalign(&mem0, bufsize, bufsize); |
| if (rc) { |
| printf("\n"); |
| return rc; |
| } |
| |
| rc = posix_memalign(&mem1, bufsize, bufsize); |
| if (rc) { |
| printf("\n"); |
| free(mem0); |
| return rc; |
| } |
| |
| rc = 0; |
| /* |
| * offset = 0 is aligned but tests the workaround for the P9N |
| * DD2.1 vector CI load issue (see 5080332c2c89 "powerpc/64s: |
| * Add workaround for P9 vector CI load issue") |
| */ |
| for (offset = 0; offset < 16; offset++) { |
| width = 16; /* vsx == 16 bytes */ |
| r = 0; |
| |
| /* load pattern into memory byte by byte */ |
| preload_data(ci0, offset, width); |
| preload_data(mem0, offset, width); // FIXME: remove?? |
| memcpy(ci0, mem0, bufsize); |
| memcpy(ci1, mem1, bufsize); /* initialise output to the same */ |
| |
| /* sanity check */ |
| test_memcmp(mem0, ci0, width, offset, test_name); |
| |
| r |= test_memcpy(ci1, ci0, width, offset, test_func); |
| r |= test_memcpy(mem1, mem0, width, offset, test_func); |
| if (r && !debug) { |
| printf("FAILED: Got signal"); |
| rc = 1; |
| break; |
| } |
| |
| r |= test_memcmp(mem1, ci1, width, offset, test_name); |
| if (r && !debug) { |
| printf("FAILED: Wrong Data"); |
| rc = 1; |
| break; |
| } |
| } |
| |
| if (rc == 0) |
| printf("PASSED"); |
| |
| printf("\n"); |
| |
| munmap(ci0, bufsize); |
| munmap(ci1, bufsize); |
| free(mem0); |
| free(mem1); |
| close(fd); |
| |
| return rc; |
| } |
| |
| static bool can_open_cifile(void) |
| { |
| int fd; |
| |
| fd = open(cipath, O_RDWR); |
| if (fd < 0) |
| return false; |
| |
| close(fd); |
| return true; |
| } |
| |
| int test_alignment_handler_vsx_206(void) |
| { |
| int rc = 0; |
| |
| SKIP_IF(!can_open_cifile()); |
| SKIP_IF(!have_hwcap(PPC_FEATURE_ARCH_2_06)); |
| |
| printf("VSX: 2.06B\n"); |
| LOAD_VSX_XFORM_TEST(lxvd2x); |
| LOAD_VSX_XFORM_TEST(lxvw4x); |
| LOAD_VSX_XFORM_TEST(lxsdx); |
| LOAD_VSX_XFORM_TEST(lxvdsx); |
| STORE_VSX_XFORM_TEST(stxvd2x); |
| STORE_VSX_XFORM_TEST(stxvw4x); |
| STORE_VSX_XFORM_TEST(stxsdx); |
| return rc; |
| } |
| |
| int test_alignment_handler_vsx_207(void) |
| { |
| int rc = 0; |
| |
| SKIP_IF(!can_open_cifile()); |
| SKIP_IF(!have_hwcap2(PPC_FEATURE2_ARCH_2_07)); |
| |
| printf("VSX: 2.07B\n"); |
| LOAD_VSX_XFORM_TEST(lxsspx); |
| LOAD_VSX_XFORM_TEST(lxsiwax); |
| LOAD_VSX_XFORM_TEST(lxsiwzx); |
| STORE_VSX_XFORM_TEST(stxsspx); |
| STORE_VSX_XFORM_TEST(stxsiwx); |
| return rc; |
| } |
| |
| int test_alignment_handler_vsx_300(void) |
| { |
| int rc = 0; |
| |
| SKIP_IF(!can_open_cifile()); |
| |
| SKIP_IF(!have_hwcap2(PPC_FEATURE2_ARCH_3_00)); |
| printf("VSX: 3.00B\n"); |
| LOAD_VMX_DFORM_TEST(lxsd); |
| LOAD_VSX_XFORM_TEST(lxsibzx); |
| LOAD_VSX_XFORM_TEST(lxsihzx); |
| LOAD_VMX_DFORM_TEST(lxssp); |
| LOAD_VSX_DFORM_TEST(lxv); |
| LOAD_VSX_XFORM_TEST(lxvb16x); |
| LOAD_VSX_XFORM_TEST(lxvh8x); |
| LOAD_VSX_XFORM_TEST(lxvx); |
| LOAD_VSX_XFORM_TEST(lxvwsx); |
| LOAD_VSX_XFORM_TEST(lxvl); |
| LOAD_VSX_XFORM_TEST(lxvll); |
| STORE_VMX_DFORM_TEST(stxsd); |
| STORE_VSX_XFORM_TEST(stxsibx); |
| STORE_VSX_XFORM_TEST(stxsihx); |
| STORE_VMX_DFORM_TEST(stxssp); |
| STORE_VSX_DFORM_TEST(stxv); |
| STORE_VSX_XFORM_TEST(stxvb16x); |
| STORE_VSX_XFORM_TEST(stxvh8x); |
| STORE_VSX_XFORM_TEST(stxvx); |
| STORE_VSX_XFORM_TEST(stxvl); |
| STORE_VSX_XFORM_TEST(stxvll); |
| return rc; |
| } |
| |
| int test_alignment_handler_vsx_prefix(void) |
| { |
| int rc = 0; |
| |
| SKIP_IF(!can_open_cifile()); |
| SKIP_IF(!have_hwcap2(PPC_FEATURE2_ARCH_3_1)); |
| |
| printf("VSX: PREFIX\n"); |
| LOAD_VSX_8LS_PREFIX_TEST(PLXSD, 0); |
| LOAD_VSX_8LS_PREFIX_TEST(PLXSSP, 0); |
| LOAD_VSX_8LS_PREFIX_TEST(PLXV0, 0); |
| LOAD_VSX_8LS_PREFIX_TEST(PLXV1, 1); |
| STORE_VSX_8LS_PREFIX_TEST(PSTXSD, 0); |
| STORE_VSX_8LS_PREFIX_TEST(PSTXSSP, 0); |
| STORE_VSX_8LS_PREFIX_TEST(PSTXV0, 0); |
| STORE_VSX_8LS_PREFIX_TEST(PSTXV1, 1); |
| return rc; |
| } |
| |
| int test_alignment_handler_integer(void) |
| { |
| int rc = 0; |
| |
| SKIP_IF(!can_open_cifile()); |
| |
| printf("Integer\n"); |
| LOAD_DFORM_TEST(lbz); |
| LOAD_DFORM_TEST(lbzu); |
| LOAD_XFORM_TEST(lbzx); |
| LOAD_XFORM_TEST(lbzux); |
| LOAD_DFORM_TEST(lhz); |
| LOAD_DFORM_TEST(lhzu); |
| LOAD_XFORM_TEST(lhzx); |
| LOAD_XFORM_TEST(lhzux); |
| LOAD_DFORM_TEST(lha); |
| LOAD_DFORM_TEST(lhau); |
| LOAD_XFORM_TEST(lhax); |
| LOAD_XFORM_TEST(lhaux); |
| LOAD_XFORM_TEST(lhbrx); |
| LOAD_DFORM_TEST(lwz); |
| LOAD_DFORM_TEST(lwzu); |
| LOAD_XFORM_TEST(lwzx); |
| LOAD_XFORM_TEST(lwzux); |
| LOAD_DFORM_TEST(lwa); |
| LOAD_XFORM_TEST(lwax); |
| LOAD_XFORM_TEST(lwaux); |
| LOAD_XFORM_TEST(lwbrx); |
| LOAD_DFORM_TEST(ld); |
| LOAD_DFORM_TEST(ldu); |
| LOAD_XFORM_TEST(ldx); |
| LOAD_XFORM_TEST(ldux); |
| STORE_DFORM_TEST(stb); |
| STORE_XFORM_TEST(stbx); |
| STORE_DFORM_TEST(stbu); |
| STORE_XFORM_TEST(stbux); |
| STORE_DFORM_TEST(sth); |
| STORE_XFORM_TEST(sthx); |
| STORE_DFORM_TEST(sthu); |
| STORE_XFORM_TEST(sthux); |
| STORE_XFORM_TEST(sthbrx); |
| STORE_DFORM_TEST(stw); |
| STORE_XFORM_TEST(stwx); |
| STORE_DFORM_TEST(stwu); |
| STORE_XFORM_TEST(stwux); |
| STORE_XFORM_TEST(stwbrx); |
| STORE_DFORM_TEST(std); |
| STORE_XFORM_TEST(stdx); |
| STORE_DFORM_TEST(stdu); |
| STORE_XFORM_TEST(stdux); |
| |
| #ifdef __BIG_ENDIAN__ |
| LOAD_DFORM_TEST(lmw); |
| STORE_DFORM_TEST(stmw); |
| #endif |
| |
| return rc; |
| } |
| |
| int test_alignment_handler_integer_206(void) |
| { |
| int rc = 0; |
| |
| SKIP_IF(!can_open_cifile()); |
| SKIP_IF(!have_hwcap(PPC_FEATURE_ARCH_2_06)); |
| |
| printf("Integer: 2.06\n"); |
| |
| LOAD_XFORM_TEST(ldbrx); |
| STORE_XFORM_TEST(stdbrx); |
| |
| return rc; |
| } |
| |
| int test_alignment_handler_integer_prefix(void) |
| { |
| int rc = 0; |
| |
| SKIP_IF(!can_open_cifile()); |
| SKIP_IF(!have_hwcap2(PPC_FEATURE2_ARCH_3_1)); |
| |
| printf("Integer: PREFIX\n"); |
| LOAD_MLS_PREFIX_TEST(PLBZ); |
| LOAD_MLS_PREFIX_TEST(PLHZ); |
| LOAD_MLS_PREFIX_TEST(PLHA); |
| LOAD_MLS_PREFIX_TEST(PLWZ); |
| LOAD_8LS_PREFIX_TEST(PLWA); |
| LOAD_8LS_PREFIX_TEST(PLD); |
| STORE_MLS_PREFIX_TEST(PSTB); |
| STORE_MLS_PREFIX_TEST(PSTH); |
| STORE_MLS_PREFIX_TEST(PSTW); |
| STORE_8LS_PREFIX_TEST(PSTD); |
| return rc; |
| } |
| |
| int test_alignment_handler_vmx(void) |
| { |
| int rc = 0; |
| |
| SKIP_IF(!can_open_cifile()); |
| SKIP_IF(!have_hwcap(PPC_FEATURE_HAS_ALTIVEC)); |
| |
| printf("VMX\n"); |
| LOAD_VMX_XFORM_TEST(lvx); |
| |
| /* |
| * FIXME: These loads only load part of the register, so our |
| * testing method doesn't work. Also they don't take alignment |
| * faults, so it's kinda pointless anyway |
| * |
| LOAD_VMX_XFORM_TEST(lvebx) |
| LOAD_VMX_XFORM_TEST(lvehx) |
| LOAD_VMX_XFORM_TEST(lvewx) |
| LOAD_VMX_XFORM_TEST(lvxl) |
| */ |
| STORE_VMX_XFORM_TEST(stvx); |
| STORE_VMX_XFORM_TEST(stvebx); |
| STORE_VMX_XFORM_TEST(stvehx); |
| STORE_VMX_XFORM_TEST(stvewx); |
| STORE_VMX_XFORM_TEST(stvxl); |
| return rc; |
| } |
| |
| int test_alignment_handler_fp(void) |
| { |
| int rc = 0; |
| |
| SKIP_IF(!can_open_cifile()); |
| |
| printf("Floating point\n"); |
| LOAD_FLOAT_DFORM_TEST(lfd); |
| LOAD_FLOAT_XFORM_TEST(lfdx); |
| LOAD_FLOAT_DFORM_TEST(lfdu); |
| LOAD_FLOAT_XFORM_TEST(lfdux); |
| LOAD_FLOAT_DFORM_TEST(lfs); |
| LOAD_FLOAT_XFORM_TEST(lfsx); |
| LOAD_FLOAT_DFORM_TEST(lfsu); |
| LOAD_FLOAT_XFORM_TEST(lfsux); |
| STORE_FLOAT_DFORM_TEST(stfd); |
| STORE_FLOAT_XFORM_TEST(stfdx); |
| STORE_FLOAT_DFORM_TEST(stfdu); |
| STORE_FLOAT_XFORM_TEST(stfdux); |
| STORE_FLOAT_DFORM_TEST(stfs); |
| STORE_FLOAT_XFORM_TEST(stfsx); |
| STORE_FLOAT_DFORM_TEST(stfsu); |
| STORE_FLOAT_XFORM_TEST(stfsux); |
| STORE_FLOAT_XFORM_TEST(stfiwx); |
| |
| return rc; |
| } |
| |
| int test_alignment_handler_fp_205(void) |
| { |
| int rc = 0; |
| |
| SKIP_IF(!can_open_cifile()); |
| SKIP_IF(!have_hwcap(PPC_FEATURE_ARCH_2_05)); |
| |
| printf("Floating point: 2.05\n"); |
| |
| LOAD_FLOAT_DFORM_TEST(lfdp); |
| LOAD_FLOAT_XFORM_TEST(lfdpx); |
| LOAD_FLOAT_XFORM_TEST(lfiwax); |
| STORE_FLOAT_DFORM_TEST(stfdp); |
| STORE_FLOAT_XFORM_TEST(stfdpx); |
| |
| return rc; |
| } |
| |
| int test_alignment_handler_fp_206(void) |
| { |
| int rc = 0; |
| |
| SKIP_IF(!can_open_cifile()); |
| SKIP_IF(!have_hwcap(PPC_FEATURE_ARCH_2_06)); |
| |
| printf("Floating point: 2.06\n"); |
| |
| LOAD_FLOAT_XFORM_TEST(lfiwzx); |
| |
| return rc; |
| } |
| |
| |
| int test_alignment_handler_fp_prefix(void) |
| { |
| int rc = 0; |
| |
| SKIP_IF(!can_open_cifile()); |
| SKIP_IF(!have_hwcap2(PPC_FEATURE2_ARCH_3_1)); |
| |
| printf("Floating point: PREFIX\n"); |
| LOAD_FLOAT_DFORM_TEST(lfs); |
| LOAD_FLOAT_MLS_PREFIX_TEST(PLFS); |
| LOAD_FLOAT_MLS_PREFIX_TEST(PLFD); |
| STORE_FLOAT_MLS_PREFIX_TEST(PSTFS); |
| STORE_FLOAT_MLS_PREFIX_TEST(PSTFD); |
| return rc; |
| } |
| |
| void usage(char *prog) |
| { |
| printf("Usage: %s [options] [path [offset]]\n", prog); |
| printf(" -d Enable debug error output\n"); |
| printf("\n"); |
| printf("This test requires a POWER8, POWER9 or POWER10 CPU "); |
| printf("and either a usable framebuffer at /dev/fb0 or "); |
| printf("the path to usable cache inhibited memory and optional "); |
| printf("offset to be provided\n"); |
| } |
| |
| int main(int argc, char *argv[]) |
| { |
| |
| struct sigaction sa; |
| int rc = 0; |
| int option = 0; |
| |
| while ((option = getopt(argc, argv, "d")) != -1) { |
| switch (option) { |
| case 'd': |
| debug++; |
| break; |
| default: |
| usage(argv[0]); |
| exit(1); |
| } |
| } |
| argc -= optind; |
| argv += optind; |
| |
| if (argc > 0) |
| cipath = argv[0]; |
| if (argc > 1) |
| cioffset = strtol(argv[1], 0, 0x10); |
| |
| bufsize = getpagesize(); |
| |
| sa.sa_sigaction = sighandler; |
| sigemptyset(&sa.sa_mask); |
| sa.sa_flags = SA_SIGINFO; |
| if (sigaction(SIGSEGV, &sa, NULL) == -1 |
| || sigaction(SIGBUS, &sa, NULL) == -1 |
| || sigaction(SIGILL, &sa, NULL) == -1) { |
| perror("sigaction"); |
| exit(1); |
| } |
| |
| prefixes_enabled = have_hwcap2(PPC_FEATURE2_ARCH_3_1); |
| |
| rc |= test_harness(test_alignment_handler_vsx_206, |
| "test_alignment_handler_vsx_206"); |
| rc |= test_harness(test_alignment_handler_vsx_207, |
| "test_alignment_handler_vsx_207"); |
| rc |= test_harness(test_alignment_handler_vsx_300, |
| "test_alignment_handler_vsx_300"); |
| rc |= test_harness(test_alignment_handler_vsx_prefix, |
| "test_alignment_handler_vsx_prefix"); |
| rc |= test_harness(test_alignment_handler_integer, |
| "test_alignment_handler_integer"); |
| rc |= test_harness(test_alignment_handler_integer_206, |
| "test_alignment_handler_integer_206"); |
| rc |= test_harness(test_alignment_handler_integer_prefix, |
| "test_alignment_handler_integer_prefix"); |
| rc |= test_harness(test_alignment_handler_vmx, |
| "test_alignment_handler_vmx"); |
| rc |= test_harness(test_alignment_handler_fp, |
| "test_alignment_handler_fp"); |
| rc |= test_harness(test_alignment_handler_fp_205, |
| "test_alignment_handler_fp_205"); |
| rc |= test_harness(test_alignment_handler_fp_206, |
| "test_alignment_handler_fp_206"); |
| rc |= test_harness(test_alignment_handler_fp_prefix, |
| "test_alignment_handler_fp_prefix"); |
| return rc; |
| } |