| #ifndef _INTEL_RINGBUFFER_H_ |
| #define _INTEL_RINGBUFFER_H_ |
| |
| #include <linux/hashtable.h> |
| #include "i915_gem_batch_pool.h" |
| #include "i915_gem_request.h" |
| #include "i915_gem_timeline.h" |
| |
| #define I915_CMD_HASH_ORDER 9 |
| |
| /* Early gen2 devices have a cacheline of just 32 bytes, using 64 is overkill, |
| * but keeps the logic simple. Indeed, the whole purpose of this macro is just |
| * to give some inclination as to some of the magic values used in the various |
| * workarounds! |
| */ |
| #define CACHELINE_BYTES 64 |
| #define CACHELINE_DWORDS (CACHELINE_BYTES / sizeof(uint32_t)) |
| |
| /* |
| * Gen2 BSpec "1. Programming Environment" / 1.4.4.6 "Ring Buffer Use" |
| * Gen3 BSpec "vol1c Memory Interface Functions" / 2.3.4.5 "Ring Buffer Use" |
| * Gen4+ BSpec "vol1c Memory Interface and Command Stream" / 5.3.4.5 "Ring Buffer Use" |
| * |
| * "If the Ring Buffer Head Pointer and the Tail Pointer are on the same |
| * cacheline, the Head Pointer must not be greater than the Tail |
| * Pointer." |
| */ |
| #define I915_RING_FREE_SPACE 64 |
| |
| struct intel_hw_status_page { |
| struct i915_vma *vma; |
| u32 *page_addr; |
| u32 ggtt_offset; |
| }; |
| |
| #define I915_READ_TAIL(engine) I915_READ(RING_TAIL((engine)->mmio_base)) |
| #define I915_WRITE_TAIL(engine, val) I915_WRITE(RING_TAIL((engine)->mmio_base), val) |
| |
| #define I915_READ_START(engine) I915_READ(RING_START((engine)->mmio_base)) |
| #define I915_WRITE_START(engine, val) I915_WRITE(RING_START((engine)->mmio_base), val) |
| |
| #define I915_READ_HEAD(engine) I915_READ(RING_HEAD((engine)->mmio_base)) |
| #define I915_WRITE_HEAD(engine, val) I915_WRITE(RING_HEAD((engine)->mmio_base), val) |
| |
| #define I915_READ_CTL(engine) I915_READ(RING_CTL((engine)->mmio_base)) |
| #define I915_WRITE_CTL(engine, val) I915_WRITE(RING_CTL((engine)->mmio_base), val) |
| |
| #define I915_READ_IMR(engine) I915_READ(RING_IMR((engine)->mmio_base)) |
| #define I915_WRITE_IMR(engine, val) I915_WRITE(RING_IMR((engine)->mmio_base), val) |
| |
| #define I915_READ_MODE(engine) I915_READ(RING_MI_MODE((engine)->mmio_base)) |
| #define I915_WRITE_MODE(engine, val) I915_WRITE(RING_MI_MODE((engine)->mmio_base), val) |
| |
| /* seqno size is actually only a uint32, but since we plan to use MI_FLUSH_DW to |
| * do the writes, and that must have qw aligned offsets, simply pretend it's 8b. |
| */ |
| #define gen8_semaphore_seqno_size sizeof(uint64_t) |
| #define GEN8_SEMAPHORE_OFFSET(__from, __to) \ |
| (((__from) * I915_NUM_ENGINES + (__to)) * gen8_semaphore_seqno_size) |
| #define GEN8_SIGNAL_OFFSET(__ring, to) \ |
| (dev_priv->semaphore->node.start + \ |
| GEN8_SEMAPHORE_OFFSET((__ring)->id, (to))) |
| #define GEN8_WAIT_OFFSET(__ring, from) \ |
| (dev_priv->semaphore->node.start + \ |
| GEN8_SEMAPHORE_OFFSET(from, (__ring)->id)) |
| |
| enum intel_engine_hangcheck_action { |
| HANGCHECK_IDLE = 0, |
| HANGCHECK_WAIT, |
| HANGCHECK_ACTIVE, |
| HANGCHECK_KICK, |
| HANGCHECK_HUNG, |
| }; |
| |
| #define HANGCHECK_SCORE_RING_HUNG 31 |
| |
| #define I915_MAX_SLICES 3 |
| #define I915_MAX_SUBSLICES 3 |
| |
| #define instdone_slice_mask(dev_priv__) \ |
| (INTEL_GEN(dev_priv__) == 7 ? \ |
| 1 : INTEL_INFO(dev_priv__)->sseu.slice_mask) |
| |
| #define instdone_subslice_mask(dev_priv__) \ |
| (INTEL_GEN(dev_priv__) == 7 ? \ |
| 1 : INTEL_INFO(dev_priv__)->sseu.subslice_mask) |
| |
| #define for_each_instdone_slice_subslice(dev_priv__, slice__, subslice__) \ |
| for ((slice__) = 0, (subslice__) = 0; \ |
| (slice__) < I915_MAX_SLICES; \ |
| (subslice__) = ((subslice__) + 1) < I915_MAX_SUBSLICES ? (subslice__) + 1 : 0, \ |
| (slice__) += ((subslice__) == 0)) \ |
| for_each_if((BIT(slice__) & instdone_slice_mask(dev_priv__)) && \ |
| (BIT(subslice__) & instdone_subslice_mask(dev_priv__))) |
| |
| struct intel_instdone { |
| u32 instdone; |
| /* The following exist only in the RCS engine */ |
| u32 slice_common; |
| u32 sampler[I915_MAX_SLICES][I915_MAX_SUBSLICES]; |
| u32 row[I915_MAX_SLICES][I915_MAX_SUBSLICES]; |
| }; |
| |
| struct intel_engine_hangcheck { |
| u64 acthd; |
| u32 seqno; |
| int score; |
| enum intel_engine_hangcheck_action action; |
| int deadlock; |
| struct intel_instdone instdone; |
| }; |
| |
| struct intel_ring { |
| struct i915_vma *vma; |
| void *vaddr; |
| |
| struct intel_engine_cs *engine; |
| |
| struct list_head request_list; |
| |
| u32 head; |
| u32 tail; |
| int space; |
| int size; |
| int effective_size; |
| |
| /** We track the position of the requests in the ring buffer, and |
| * when each is retired we increment last_retired_head as the GPU |
| * must have finished processing the request and so we know we |
| * can advance the ringbuffer up to that position. |
| * |
| * last_retired_head is set to -1 after the value is consumed so |
| * we can detect new retirements. |
| */ |
| u32 last_retired_head; |
| }; |
| |
| struct i915_gem_context; |
| struct drm_i915_reg_table; |
| |
| /* |
| * we use a single page to load ctx workarounds so all of these |
| * values are referred in terms of dwords |
| * |
| * struct i915_wa_ctx_bb: |
| * offset: specifies batch starting position, also helpful in case |
| * if we want to have multiple batches at different offsets based on |
| * some criteria. It is not a requirement at the moment but provides |
| * an option for future use. |
| * size: size of the batch in DWORDS |
| */ |
| struct i915_ctx_workarounds { |
| struct i915_wa_ctx_bb { |
| u32 offset; |
| u32 size; |
| } indirect_ctx, per_ctx; |
| struct i915_vma *vma; |
| }; |
| |
| struct drm_i915_gem_request; |
| struct intel_render_state; |
| |
| struct intel_engine_cs { |
| struct drm_i915_private *i915; |
| const char *name; |
| enum intel_engine_id { |
| RCS = 0, |
| BCS, |
| VCS, |
| VCS2, /* Keep instances of the same type engine together. */ |
| VECS |
| } id; |
| #define _VCS(n) (VCS + (n)) |
| unsigned int exec_id; |
| enum intel_engine_hw_id { |
| RCS_HW = 0, |
| VCS_HW, |
| BCS_HW, |
| VECS_HW, |
| VCS2_HW |
| } hw_id; |
| enum intel_engine_hw_id guc_id; /* XXX same as hw_id? */ |
| u32 mmio_base; |
| unsigned int irq_shift; |
| struct intel_ring *buffer; |
| struct intel_timeline *timeline; |
| |
| struct intel_render_state *render_state; |
| |
| /* Rather than have every client wait upon all user interrupts, |
| * with the herd waking after every interrupt and each doing the |
| * heavyweight seqno dance, we delegate the task (of being the |
| * bottom-half of the user interrupt) to the first client. After |
| * every interrupt, we wake up one client, who does the heavyweight |
| * coherent seqno read and either goes back to sleep (if incomplete), |
| * or wakes up all the completed clients in parallel, before then |
| * transferring the bottom-half status to the next client in the queue. |
| * |
| * Compared to walking the entire list of waiters in a single dedicated |
| * bottom-half, we reduce the latency of the first waiter by avoiding |
| * a context switch, but incur additional coherent seqno reads when |
| * following the chain of request breadcrumbs. Since it is most likely |
| * that we have a single client waiting on each seqno, then reducing |
| * the overhead of waking that client is much preferred. |
| */ |
| struct intel_breadcrumbs { |
| struct task_struct __rcu *irq_seqno_bh; /* bh for interrupts */ |
| bool irq_posted; |
| |
| spinlock_t lock; /* protects the lists of requests; irqsafe */ |
| struct rb_root waiters; /* sorted by retirement, priority */ |
| struct rb_root signals; /* sorted by retirement */ |
| struct intel_wait *first_wait; /* oldest waiter by retirement */ |
| struct task_struct *signaler; /* used for fence signalling */ |
| struct drm_i915_gem_request *first_signal; |
| struct timer_list fake_irq; /* used after a missed interrupt */ |
| struct timer_list hangcheck; /* detect missed interrupts */ |
| |
| unsigned long timeout; |
| |
| bool irq_enabled : 1; |
| bool rpm_wakelock : 1; |
| } breadcrumbs; |
| |
| /* |
| * A pool of objects to use as shadow copies of client batch buffers |
| * when the command parser is enabled. Prevents the client from |
| * modifying the batch contents after software parsing. |
| */ |
| struct i915_gem_batch_pool batch_pool; |
| |
| struct intel_hw_status_page status_page; |
| struct i915_ctx_workarounds wa_ctx; |
| struct i915_vma *scratch; |
| |
| u32 irq_keep_mask; /* always keep these interrupts */ |
| u32 irq_enable_mask; /* bitmask to enable ring interrupt */ |
| void (*irq_enable)(struct intel_engine_cs *engine); |
| void (*irq_disable)(struct intel_engine_cs *engine); |
| |
| int (*init_hw)(struct intel_engine_cs *engine); |
| void (*reset_hw)(struct intel_engine_cs *engine, |
| struct drm_i915_gem_request *req); |
| |
| int (*init_context)(struct drm_i915_gem_request *req); |
| |
| int (*emit_flush)(struct drm_i915_gem_request *request, |
| u32 mode); |
| #define EMIT_INVALIDATE BIT(0) |
| #define EMIT_FLUSH BIT(1) |
| #define EMIT_BARRIER (EMIT_INVALIDATE | EMIT_FLUSH) |
| int (*emit_bb_start)(struct drm_i915_gem_request *req, |
| u64 offset, u32 length, |
| unsigned int dispatch_flags); |
| #define I915_DISPATCH_SECURE BIT(0) |
| #define I915_DISPATCH_PINNED BIT(1) |
| #define I915_DISPATCH_RS BIT(2) |
| void (*emit_breadcrumb)(struct drm_i915_gem_request *req, |
| u32 *out); |
| int emit_breadcrumb_sz; |
| |
| /* Pass the request to the hardware queue (e.g. directly into |
| * the legacy ringbuffer or to the end of an execlist). |
| * |
| * This is called from an atomic context with irqs disabled; must |
| * be irq safe. |
| */ |
| void (*submit_request)(struct drm_i915_gem_request *req); |
| |
| /* Call when the priority on a request has changed and it and its |
| * dependencies may need rescheduling. Note the request itself may |
| * not be ready to run! |
| * |
| * Called under the struct_mutex. |
| */ |
| void (*schedule)(struct drm_i915_gem_request *request, |
| int priority); |
| |
| /* Some chipsets are not quite as coherent as advertised and need |
| * an expensive kick to force a true read of the up-to-date seqno. |
| * However, the up-to-date seqno is not always required and the last |
| * seen value is good enough. Note that the seqno will always be |
| * monotonic, even if not coherent. |
| */ |
| void (*irq_seqno_barrier)(struct intel_engine_cs *engine); |
| void (*cleanup)(struct intel_engine_cs *engine); |
| |
| /* GEN8 signal/wait table - never trust comments! |
| * signal to signal to signal to signal to signal to |
| * RCS VCS BCS VECS VCS2 |
| * -------------------------------------------------------------------- |
| * RCS | NOP (0x00) | VCS (0x08) | BCS (0x10) | VECS (0x18) | VCS2 (0x20) | |
| * |------------------------------------------------------------------- |
| * VCS | RCS (0x28) | NOP (0x30) | BCS (0x38) | VECS (0x40) | VCS2 (0x48) | |
| * |------------------------------------------------------------------- |
| * BCS | RCS (0x50) | VCS (0x58) | NOP (0x60) | VECS (0x68) | VCS2 (0x70) | |
| * |------------------------------------------------------------------- |
| * VECS | RCS (0x78) | VCS (0x80) | BCS (0x88) | NOP (0x90) | VCS2 (0x98) | |
| * |------------------------------------------------------------------- |
| * VCS2 | RCS (0xa0) | VCS (0xa8) | BCS (0xb0) | VECS (0xb8) | NOP (0xc0) | |
| * |------------------------------------------------------------------- |
| * |
| * Generalization: |
| * f(x, y) := (x->id * NUM_RINGS * seqno_size) + (seqno_size * y->id) |
| * ie. transpose of g(x, y) |
| * |
| * sync from sync from sync from sync from sync from |
| * RCS VCS BCS VECS VCS2 |
| * -------------------------------------------------------------------- |
| * RCS | NOP (0x00) | VCS (0x28) | BCS (0x50) | VECS (0x78) | VCS2 (0xa0) | |
| * |------------------------------------------------------------------- |
| * VCS | RCS (0x08) | NOP (0x30) | BCS (0x58) | VECS (0x80) | VCS2 (0xa8) | |
| * |------------------------------------------------------------------- |
| * BCS | RCS (0x10) | VCS (0x38) | NOP (0x60) | VECS (0x88) | VCS2 (0xb0) | |
| * |------------------------------------------------------------------- |
| * VECS | RCS (0x18) | VCS (0x40) | BCS (0x68) | NOP (0x90) | VCS2 (0xb8) | |
| * |------------------------------------------------------------------- |
| * VCS2 | RCS (0x20) | VCS (0x48) | BCS (0x70) | VECS (0x98) | NOP (0xc0) | |
| * |------------------------------------------------------------------- |
| * |
| * Generalization: |
| * g(x, y) := (y->id * NUM_RINGS * seqno_size) + (seqno_size * x->id) |
| * ie. transpose of f(x, y) |
| */ |
| struct { |
| union { |
| #define GEN6_SEMAPHORE_LAST VECS_HW |
| #define GEN6_NUM_SEMAPHORES (GEN6_SEMAPHORE_LAST + 1) |
| #define GEN6_SEMAPHORES_MASK GENMASK(GEN6_SEMAPHORE_LAST, 0) |
| struct { |
| /* our mbox written by others */ |
| u32 wait[GEN6_NUM_SEMAPHORES]; |
| /* mboxes this ring signals to */ |
| i915_reg_t signal[GEN6_NUM_SEMAPHORES]; |
| } mbox; |
| u64 signal_ggtt[I915_NUM_ENGINES]; |
| }; |
| |
| /* AKA wait() */ |
| int (*sync_to)(struct drm_i915_gem_request *req, |
| struct drm_i915_gem_request *signal); |
| u32 *(*signal)(struct drm_i915_gem_request *req, u32 *out); |
| } semaphore; |
| |
| /* Execlists */ |
| struct tasklet_struct irq_tasklet; |
| struct execlist_port { |
| struct drm_i915_gem_request *request; |
| unsigned int count; |
| } execlist_port[2]; |
| struct rb_root execlist_queue; |
| struct rb_node *execlist_first; |
| unsigned int fw_domains; |
| bool disable_lite_restore_wa; |
| bool preempt_wa; |
| u32 ctx_desc_template; |
| |
| struct i915_gem_context *last_context; |
| |
| struct intel_engine_hangcheck hangcheck; |
| |
| bool needs_cmd_parser; |
| |
| /* |
| * Table of commands the command parser needs to know about |
| * for this engine. |
| */ |
| DECLARE_HASHTABLE(cmd_hash, I915_CMD_HASH_ORDER); |
| |
| /* |
| * Table of registers allowed in commands that read/write registers. |
| */ |
| const struct drm_i915_reg_table *reg_tables; |
| int reg_table_count; |
| |
| /* |
| * Returns the bitmask for the length field of the specified command. |
| * Return 0 for an unrecognized/invalid command. |
| * |
| * If the command parser finds an entry for a command in the engine's |
| * cmd_tables, it gets the command's length based on the table entry. |
| * If not, it calls this function to determine the per-engine length |
| * field encoding for the command (i.e. different opcode ranges use |
| * certain bits to encode the command length in the header). |
| */ |
| u32 (*get_cmd_length_mask)(u32 cmd_header); |
| }; |
| |
| static inline unsigned |
| intel_engine_flag(const struct intel_engine_cs *engine) |
| { |
| return 1 << engine->id; |
| } |
| |
| static inline void |
| intel_flush_status_page(struct intel_engine_cs *engine, int reg) |
| { |
| mb(); |
| clflush(&engine->status_page.page_addr[reg]); |
| mb(); |
| } |
| |
| static inline u32 |
| intel_read_status_page(struct intel_engine_cs *engine, int reg) |
| { |
| /* Ensure that the compiler doesn't optimize away the load. */ |
| return READ_ONCE(engine->status_page.page_addr[reg]); |
| } |
| |
| static inline void |
| intel_write_status_page(struct intel_engine_cs *engine, |
| int reg, u32 value) |
| { |
| engine->status_page.page_addr[reg] = value; |
| } |
| |
| /* |
| * Reads a dword out of the status page, which is written to from the command |
| * queue by automatic updates, MI_REPORT_HEAD, MI_STORE_DATA_INDEX, or |
| * MI_STORE_DATA_IMM. |
| * |
| * The following dwords have a reserved meaning: |
| * 0x00: ISR copy, updated when an ISR bit not set in the HWSTAM changes. |
| * 0x04: ring 0 head pointer |
| * 0x05: ring 1 head pointer (915-class) |
| * 0x06: ring 2 head pointer (915-class) |
| * 0x10-0x1b: Context status DWords (GM45) |
| * 0x1f: Last written status offset. (GM45) |
| * 0x20-0x2f: Reserved (Gen6+) |
| * |
| * The area from dword 0x30 to 0x3ff is available for driver usage. |
| */ |
| #define I915_GEM_HWS_INDEX 0x30 |
| #define I915_GEM_HWS_INDEX_ADDR (I915_GEM_HWS_INDEX << MI_STORE_DWORD_INDEX_SHIFT) |
| #define I915_GEM_HWS_SCRATCH_INDEX 0x40 |
| #define I915_GEM_HWS_SCRATCH_ADDR (I915_GEM_HWS_SCRATCH_INDEX << MI_STORE_DWORD_INDEX_SHIFT) |
| |
| struct intel_ring * |
| intel_engine_create_ring(struct intel_engine_cs *engine, int size); |
| int intel_ring_pin(struct intel_ring *ring); |
| void intel_ring_unpin(struct intel_ring *ring); |
| void intel_ring_free(struct intel_ring *ring); |
| |
| void intel_engine_stop(struct intel_engine_cs *engine); |
| void intel_engine_cleanup(struct intel_engine_cs *engine); |
| |
| void intel_legacy_submission_resume(struct drm_i915_private *dev_priv); |
| |
| int intel_ring_alloc_request_extras(struct drm_i915_gem_request *request); |
| |
| int __must_check intel_ring_begin(struct drm_i915_gem_request *req, int n); |
| int __must_check intel_ring_cacheline_align(struct drm_i915_gem_request *req); |
| |
| static inline void intel_ring_emit(struct intel_ring *ring, u32 data) |
| { |
| *(uint32_t *)(ring->vaddr + ring->tail) = data; |
| ring->tail += 4; |
| } |
| |
| static inline void intel_ring_emit_reg(struct intel_ring *ring, i915_reg_t reg) |
| { |
| intel_ring_emit(ring, i915_mmio_reg_offset(reg)); |
| } |
| |
| static inline void intel_ring_advance(struct intel_ring *ring) |
| { |
| /* Dummy function. |
| * |
| * This serves as a placeholder in the code so that the reader |
| * can compare against the preceding intel_ring_begin() and |
| * check that the number of dwords emitted matches the space |
| * reserved for the command packet (i.e. the value passed to |
| * intel_ring_begin()). |
| */ |
| } |
| |
| static inline u32 intel_ring_offset(struct intel_ring *ring, void *addr) |
| { |
| /* Don't write ring->size (equivalent to 0) as that hangs some GPUs. */ |
| u32 offset = addr - ring->vaddr; |
| return offset & (ring->size - 1); |
| } |
| |
| int __intel_ring_space(int head, int tail, int size); |
| void intel_ring_update_space(struct intel_ring *ring); |
| |
| void intel_engine_init_global_seqno(struct intel_engine_cs *engine, u32 seqno); |
| |
| void intel_engine_setup_common(struct intel_engine_cs *engine); |
| int intel_engine_init_common(struct intel_engine_cs *engine); |
| int intel_engine_create_scratch(struct intel_engine_cs *engine, int size); |
| void intel_engine_cleanup_common(struct intel_engine_cs *engine); |
| |
| int intel_init_render_ring_buffer(struct intel_engine_cs *engine); |
| int intel_init_bsd_ring_buffer(struct intel_engine_cs *engine); |
| int intel_init_bsd2_ring_buffer(struct intel_engine_cs *engine); |
| int intel_init_blt_ring_buffer(struct intel_engine_cs *engine); |
| int intel_init_vebox_ring_buffer(struct intel_engine_cs *engine); |
| |
| u64 intel_engine_get_active_head(struct intel_engine_cs *engine); |
| u64 intel_engine_get_last_batch_head(struct intel_engine_cs *engine); |
| |
| static inline u32 intel_engine_get_seqno(struct intel_engine_cs *engine) |
| { |
| return intel_read_status_page(engine, I915_GEM_HWS_INDEX); |
| } |
| |
| static inline u32 intel_engine_last_submit(struct intel_engine_cs *engine) |
| { |
| /* We are only peeking at the tail of the submit queue (and not the |
| * queue itself) in order to gain a hint as to the current active |
| * state of the engine. Callers are not expected to be taking |
| * engine->timeline->lock, nor are they expected to be concerned |
| * wtih serialising this hint with anything, so document it as |
| * a hint and nothing more. |
| */ |
| return READ_ONCE(engine->timeline->last_submitted_seqno); |
| } |
| |
| int init_workarounds_ring(struct intel_engine_cs *engine); |
| |
| void intel_engine_get_instdone(struct intel_engine_cs *engine, |
| struct intel_instdone *instdone); |
| |
| /* |
| * Arbitrary size for largest possible 'add request' sequence. The code paths |
| * are complex and variable. Empirical measurement shows that the worst case |
| * is BDW at 192 bytes (6 + 6 + 36 dwords), then ILK at 136 bytes. However, |
| * we need to allocate double the largest single packet within that emission |
| * to account for tail wraparound (so 6 + 6 + 72 dwords for BDW). |
| */ |
| #define MIN_SPACE_FOR_ADD_REQUEST 336 |
| |
| static inline u32 intel_hws_seqno_address(struct intel_engine_cs *engine) |
| { |
| return engine->status_page.ggtt_offset + I915_GEM_HWS_INDEX_ADDR; |
| } |
| |
| /* intel_breadcrumbs.c -- user interrupt bottom-half for waiters */ |
| int intel_engine_init_breadcrumbs(struct intel_engine_cs *engine); |
| |
| static inline void intel_wait_init(struct intel_wait *wait, u32 seqno) |
| { |
| wait->tsk = current; |
| wait->seqno = seqno; |
| } |
| |
| static inline bool intel_wait_complete(const struct intel_wait *wait) |
| { |
| return RB_EMPTY_NODE(&wait->node); |
| } |
| |
| bool intel_engine_add_wait(struct intel_engine_cs *engine, |
| struct intel_wait *wait); |
| void intel_engine_remove_wait(struct intel_engine_cs *engine, |
| struct intel_wait *wait); |
| void intel_engine_enable_signaling(struct drm_i915_gem_request *request); |
| |
| static inline bool intel_engine_has_waiter(const struct intel_engine_cs *engine) |
| { |
| return rcu_access_pointer(engine->breadcrumbs.irq_seqno_bh); |
| } |
| |
| static inline bool intel_engine_wakeup(const struct intel_engine_cs *engine) |
| { |
| bool wakeup = false; |
| |
| /* Note that for this not to dangerously chase a dangling pointer, |
| * we must hold the rcu_read_lock here. |
| * |
| * Also note that tsk is likely to be in !TASK_RUNNING state so an |
| * early test for tsk->state != TASK_RUNNING before wake_up_process() |
| * is unlikely to be beneficial. |
| */ |
| if (intel_engine_has_waiter(engine)) { |
| struct task_struct *tsk; |
| |
| rcu_read_lock(); |
| tsk = rcu_dereference(engine->breadcrumbs.irq_seqno_bh); |
| if (tsk) |
| wakeup = wake_up_process(tsk); |
| rcu_read_unlock(); |
| } |
| |
| return wakeup; |
| } |
| |
| void intel_engine_reset_breadcrumbs(struct intel_engine_cs *engine); |
| void intel_engine_fini_breadcrumbs(struct intel_engine_cs *engine); |
| unsigned int intel_breadcrumbs_busy(struct drm_i915_private *i915); |
| |
| #endif /* _INTEL_RINGBUFFER_H_ */ |