| /* |
| * linux/arch/arm/mach-integrator/core.c |
| * |
| * Copyright (C) 2000-2003 Deep Blue Solutions Ltd |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2, as |
| * published by the Free Software Foundation. |
| */ |
| #include <linux/types.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/device.h> |
| #include <linux/spinlock.h> |
| #include <linux/interrupt.h> |
| #include <linux/sched.h> |
| #include <linux/smp.h> |
| |
| #include <asm/hardware.h> |
| #include <asm/irq.h> |
| #include <asm/io.h> |
| #include <asm/hardware/amba.h> |
| #include <asm/hardware/arm_timer.h> |
| #include <asm/arch/cm.h> |
| #include <asm/system.h> |
| #include <asm/leds.h> |
| #include <asm/mach/time.h> |
| |
| #include "common.h" |
| |
| static struct amba_device rtc_device = { |
| .dev = { |
| .bus_id = "mb:15", |
| }, |
| .res = { |
| .start = INTEGRATOR_RTC_BASE, |
| .end = INTEGRATOR_RTC_BASE + SZ_4K - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| .irq = { IRQ_RTCINT, NO_IRQ }, |
| .periphid = 0x00041030, |
| }; |
| |
| static struct amba_device uart0_device = { |
| .dev = { |
| .bus_id = "mb:16", |
| }, |
| .res = { |
| .start = INTEGRATOR_UART0_BASE, |
| .end = INTEGRATOR_UART0_BASE + SZ_4K - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| .irq = { IRQ_UARTINT0, NO_IRQ }, |
| .periphid = 0x0041010, |
| }; |
| |
| static struct amba_device uart1_device = { |
| .dev = { |
| .bus_id = "mb:17", |
| }, |
| .res = { |
| .start = INTEGRATOR_UART1_BASE, |
| .end = INTEGRATOR_UART1_BASE + SZ_4K - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| .irq = { IRQ_UARTINT1, NO_IRQ }, |
| .periphid = 0x0041010, |
| }; |
| |
| static struct amba_device kmi0_device = { |
| .dev = { |
| .bus_id = "mb:18", |
| }, |
| .res = { |
| .start = KMI0_BASE, |
| .end = KMI0_BASE + SZ_4K - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| .irq = { IRQ_KMIINT0, NO_IRQ }, |
| .periphid = 0x00041050, |
| }; |
| |
| static struct amba_device kmi1_device = { |
| .dev = { |
| .bus_id = "mb:19", |
| }, |
| .res = { |
| .start = KMI1_BASE, |
| .end = KMI1_BASE + SZ_4K - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| .irq = { IRQ_KMIINT1, NO_IRQ }, |
| .periphid = 0x00041050, |
| }; |
| |
| static struct amba_device *amba_devs[] __initdata = { |
| &rtc_device, |
| &uart0_device, |
| &uart1_device, |
| &kmi0_device, |
| &kmi1_device, |
| }; |
| |
| static int __init integrator_init(void) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { |
| struct amba_device *d = amba_devs[i]; |
| amba_device_register(d, &iomem_resource); |
| } |
| |
| return 0; |
| } |
| |
| arch_initcall(integrator_init); |
| |
| #define CM_CTRL IO_ADDRESS(INTEGRATOR_HDR_BASE) + INTEGRATOR_HDR_CTRL_OFFSET |
| |
| static DEFINE_SPINLOCK(cm_lock); |
| |
| /** |
| * cm_control - update the CM_CTRL register. |
| * @mask: bits to change |
| * @set: bits to set |
| */ |
| void cm_control(u32 mask, u32 set) |
| { |
| unsigned long flags; |
| u32 val; |
| |
| spin_lock_irqsave(&cm_lock, flags); |
| val = readl(CM_CTRL) & ~mask; |
| writel(val | set, CM_CTRL); |
| spin_unlock_irqrestore(&cm_lock, flags); |
| } |
| |
| EXPORT_SYMBOL(cm_control); |
| |
| /* |
| * Where is the timer (VA)? |
| */ |
| #define TIMER0_VA_BASE (IO_ADDRESS(INTEGRATOR_CT_BASE)+0x00000000) |
| #define TIMER1_VA_BASE (IO_ADDRESS(INTEGRATOR_CT_BASE)+0x00000100) |
| #define TIMER2_VA_BASE (IO_ADDRESS(INTEGRATOR_CT_BASE)+0x00000200) |
| #define VA_IC_BASE IO_ADDRESS(INTEGRATOR_IC_BASE) |
| |
| /* |
| * How long is the timer interval? |
| */ |
| #define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_10) |
| #if TIMER_INTERVAL >= 0x100000 |
| #define TICKS2USECS(x) (256 * (x) / TICKS_PER_uSEC) |
| #elif TIMER_INTERVAL >= 0x10000 |
| #define TICKS2USECS(x) (16 * (x) / TICKS_PER_uSEC) |
| #else |
| #define TICKS2USECS(x) ((x) / TICKS_PER_uSEC) |
| #endif |
| |
| static unsigned long timer_reload; |
| |
| /* |
| * Returns number of ms since last clock interrupt. Note that interrupts |
| * will have been disabled by do_gettimeoffset() |
| */ |
| unsigned long integrator_gettimeoffset(void) |
| { |
| unsigned long ticks1, ticks2, status; |
| |
| /* |
| * Get the current number of ticks. Note that there is a race |
| * condition between us reading the timer and checking for |
| * an interrupt. We get around this by ensuring that the |
| * counter has not reloaded between our two reads. |
| */ |
| ticks2 = readl(TIMER1_VA_BASE + TIMER_VALUE) & 0xffff; |
| do { |
| ticks1 = ticks2; |
| status = __raw_readl(VA_IC_BASE + IRQ_RAW_STATUS); |
| ticks2 = readl(TIMER1_VA_BASE + TIMER_VALUE) & 0xffff; |
| } while (ticks2 > ticks1); |
| |
| /* |
| * Number of ticks since last interrupt. |
| */ |
| ticks1 = timer_reload - ticks2; |
| |
| /* |
| * Interrupt pending? If so, we've reloaded once already. |
| */ |
| if (status & (1 << IRQ_TIMERINT1)) |
| ticks1 += timer_reload; |
| |
| /* |
| * Convert the ticks to usecs |
| */ |
| return TICKS2USECS(ticks1); |
| } |
| |
| /* |
| * IRQ handler for the timer |
| */ |
| static irqreturn_t |
| integrator_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) |
| { |
| write_seqlock(&xtime_lock); |
| |
| /* |
| * clear the interrupt |
| */ |
| writel(1, TIMER1_VA_BASE + TIMER_INTCLR); |
| |
| /* |
| * the clock tick routines are only processed on the |
| * primary CPU |
| */ |
| if (hard_smp_processor_id() == 0) { |
| timer_tick(regs); |
| #ifdef CONFIG_SMP |
| smp_send_timer(); |
| #endif |
| } |
| |
| #ifdef CONFIG_SMP |
| /* |
| * this is the ARM equivalent of the APIC timer interrupt |
| */ |
| update_process_times(user_mode(regs)); |
| #endif /* CONFIG_SMP */ |
| |
| write_sequnlock(&xtime_lock); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static struct irqaction integrator_timer_irq = { |
| .name = "Integrator Timer Tick", |
| .flags = SA_INTERRUPT | SA_TIMER, |
| .handler = integrator_timer_interrupt, |
| }; |
| |
| /* |
| * Set up timer interrupt, and return the current time in seconds. |
| */ |
| void __init integrator_time_init(unsigned long reload, unsigned int ctrl) |
| { |
| unsigned int timer_ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC; |
| |
| timer_reload = reload; |
| timer_ctrl |= ctrl; |
| |
| if (timer_reload > 0x100000) { |
| timer_reload >>= 8; |
| timer_ctrl |= TIMER_CTRL_DIV256; |
| } else if (timer_reload > 0x010000) { |
| timer_reload >>= 4; |
| timer_ctrl |= TIMER_CTRL_DIV16; |
| } |
| |
| /* |
| * Initialise to a known state (all timers off) |
| */ |
| writel(0, TIMER0_VA_BASE + TIMER_CTRL); |
| writel(0, TIMER1_VA_BASE + TIMER_CTRL); |
| writel(0, TIMER2_VA_BASE + TIMER_CTRL); |
| |
| writel(timer_reload, TIMER1_VA_BASE + TIMER_LOAD); |
| writel(timer_reload, TIMER1_VA_BASE + TIMER_VALUE); |
| writel(timer_ctrl, TIMER1_VA_BASE + TIMER_CTRL); |
| |
| /* |
| * Make irqs happen for the system timer |
| */ |
| setup_irq(IRQ_TIMERINT1, &integrator_timer_irq); |
| } |