| /* |
| * f_mass_storage.c -- Mass Storage USB Composite Function |
| * |
| * Copyright (C) 2003-2008 Alan Stern |
| * Copyright (C) 2009 Samsung Electronics |
| * Author: Michal Nazarewicz <mina86@mina86.com> |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions, and the following disclaimer, |
| * without modification. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. The names of the above-listed copyright holders may not be used |
| * to endorse or promote products derived from this software without |
| * specific prior written permission. |
| * |
| * ALTERNATIVELY, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") as published by the Free Software |
| * Foundation, either version 2 of that License or (at your option) any |
| * later version. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS |
| * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, |
| * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR |
| * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR |
| * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, |
| * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, |
| * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR |
| * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF |
| * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING |
| * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| /* |
| * The Mass Storage Function acts as a USB Mass Storage device, |
| * appearing to the host as a disk drive or as a CD-ROM drive. In |
| * addition to providing an example of a genuinely useful composite |
| * function for a USB device, it also illustrates a technique of |
| * double-buffering for increased throughput. |
| * |
| * For more information about MSF and in particular its module |
| * parameters and sysfs interface read the |
| * <Documentation/usb/mass-storage.txt> file. |
| */ |
| |
| /* |
| * MSF is configured by specifying a fsg_config structure. It has the |
| * following fields: |
| * |
| * nluns Number of LUNs function have (anywhere from 1 |
| * to FSG_MAX_LUNS). |
| * luns An array of LUN configuration values. This |
| * should be filled for each LUN that |
| * function will include (ie. for "nluns" |
| * LUNs). Each element of the array has |
| * the following fields: |
| * ->filename The path to the backing file for the LUN. |
| * Required if LUN is not marked as |
| * removable. |
| * ->ro Flag specifying access to the LUN shall be |
| * read-only. This is implied if CD-ROM |
| * emulation is enabled as well as when |
| * it was impossible to open "filename" |
| * in R/W mode. |
| * ->removable Flag specifying that LUN shall be indicated as |
| * being removable. |
| * ->cdrom Flag specifying that LUN shall be reported as |
| * being a CD-ROM. |
| * ->nofua Flag specifying that FUA flag in SCSI WRITE(10,12) |
| * commands for this LUN shall be ignored. |
| * |
| * vendor_name |
| * product_name |
| * release Information used as a reply to INQUIRY |
| * request. To use default set to NULL, |
| * NULL, 0xffff respectively. The first |
| * field should be 8 and the second 16 |
| * characters or less. |
| * |
| * can_stall Set to permit function to halt bulk endpoints. |
| * Disabled on some USB devices known not |
| * to work correctly. You should set it |
| * to true. |
| * |
| * If "removable" is not set for a LUN then a backing file must be |
| * specified. If it is set, then NULL filename means the LUN's medium |
| * is not loaded (an empty string as "filename" in the fsg_config |
| * structure causes error). The CD-ROM emulation includes a single |
| * data track and no audio tracks; hence there need be only one |
| * backing file per LUN. |
| * |
| * This function is heavily based on "File-backed Storage Gadget" by |
| * Alan Stern which in turn is heavily based on "Gadget Zero" by David |
| * Brownell. The driver's SCSI command interface was based on the |
| * "Information technology - Small Computer System Interface - 2" |
| * document from X3T9.2 Project 375D, Revision 10L, 7-SEP-93, |
| * available at <http://www.t10.org/ftp/t10/drafts/s2/s2-r10l.pdf>. |
| * The single exception is opcode 0x23 (READ FORMAT CAPACITIES), which |
| * was based on the "Universal Serial Bus Mass Storage Class UFI |
| * Command Specification" document, Revision 1.0, December 14, 1998, |
| * available at |
| * <http://www.usb.org/developers/devclass_docs/usbmass-ufi10.pdf>. |
| */ |
| |
| /* |
| * Driver Design |
| * |
| * The MSF is fairly straightforward. There is a main kernel |
| * thread that handles most of the work. Interrupt routines field |
| * callbacks from the controller driver: bulk- and interrupt-request |
| * completion notifications, endpoint-0 events, and disconnect events. |
| * Completion events are passed to the main thread by wakeup calls. Many |
| * ep0 requests are handled at interrupt time, but SetInterface, |
| * SetConfiguration, and device reset requests are forwarded to the |
| * thread in the form of "exceptions" using SIGUSR1 signals (since they |
| * should interrupt any ongoing file I/O operations). |
| * |
| * The thread's main routine implements the standard command/data/status |
| * parts of a SCSI interaction. It and its subroutines are full of tests |
| * for pending signals/exceptions -- all this polling is necessary since |
| * the kernel has no setjmp/longjmp equivalents. (Maybe this is an |
| * indication that the driver really wants to be running in userspace.) |
| * An important point is that so long as the thread is alive it keeps an |
| * open reference to the backing file. This will prevent unmounting |
| * the backing file's underlying filesystem and could cause problems |
| * during system shutdown, for example. To prevent such problems, the |
| * thread catches INT, TERM, and KILL signals and converts them into |
| * an EXIT exception. |
| * |
| * In normal operation the main thread is started during the gadget's |
| * fsg_bind() callback and stopped during fsg_unbind(). But it can |
| * also exit when it receives a signal, and there's no point leaving |
| * the gadget running when the thread is dead. As of this moment, MSF |
| * provides no way to deregister the gadget when thread dies -- maybe |
| * a callback functions is needed. |
| * |
| * To provide maximum throughput, the driver uses a circular pipeline of |
| * buffer heads (struct fsg_buffhd). In principle the pipeline can be |
| * arbitrarily long; in practice the benefits don't justify having more |
| * than 2 stages (i.e., double buffering). But it helps to think of the |
| * pipeline as being a long one. Each buffer head contains a bulk-in and |
| * a bulk-out request pointer (since the buffer can be used for both |
| * output and input -- directions always are given from the host's |
| * point of view) as well as a pointer to the buffer and various state |
| * variables. |
| * |
| * Use of the pipeline follows a simple protocol. There is a variable |
| * (fsg->next_buffhd_to_fill) that points to the next buffer head to use. |
| * At any time that buffer head may still be in use from an earlier |
| * request, so each buffer head has a state variable indicating whether |
| * it is EMPTY, FULL, or BUSY. Typical use involves waiting for the |
| * buffer head to be EMPTY, filling the buffer either by file I/O or by |
| * USB I/O (during which the buffer head is BUSY), and marking the buffer |
| * head FULL when the I/O is complete. Then the buffer will be emptied |
| * (again possibly by USB I/O, during which it is marked BUSY) and |
| * finally marked EMPTY again (possibly by a completion routine). |
| * |
| * A module parameter tells the driver to avoid stalling the bulk |
| * endpoints wherever the transport specification allows. This is |
| * necessary for some UDCs like the SuperH, which cannot reliably clear a |
| * halt on a bulk endpoint. However, under certain circumstances the |
| * Bulk-only specification requires a stall. In such cases the driver |
| * will halt the endpoint and set a flag indicating that it should clear |
| * the halt in software during the next device reset. Hopefully this |
| * will permit everything to work correctly. Furthermore, although the |
| * specification allows the bulk-out endpoint to halt when the host sends |
| * too much data, implementing this would cause an unavoidable race. |
| * The driver will always use the "no-stall" approach for OUT transfers. |
| * |
| * One subtle point concerns sending status-stage responses for ep0 |
| * requests. Some of these requests, such as device reset, can involve |
| * interrupting an ongoing file I/O operation, which might take an |
| * arbitrarily long time. During that delay the host might give up on |
| * the original ep0 request and issue a new one. When that happens the |
| * driver should not notify the host about completion of the original |
| * request, as the host will no longer be waiting for it. So the driver |
| * assigns to each ep0 request a unique tag, and it keeps track of the |
| * tag value of the request associated with a long-running exception |
| * (device-reset, interface-change, or configuration-change). When the |
| * exception handler is finished, the status-stage response is submitted |
| * only if the current ep0 request tag is equal to the exception request |
| * tag. Thus only the most recently received ep0 request will get a |
| * status-stage response. |
| * |
| * Warning: This driver source file is too long. It ought to be split up |
| * into a header file plus about 3 separate .c files, to handle the details |
| * of the Gadget, USB Mass Storage, and SCSI protocols. |
| */ |
| |
| |
| /* #define VERBOSE_DEBUG */ |
| /* #define DUMP_MSGS */ |
| |
| #include <linux/blkdev.h> |
| #include <linux/completion.h> |
| #include <linux/dcache.h> |
| #include <linux/delay.h> |
| #include <linux/device.h> |
| #include <linux/fcntl.h> |
| #include <linux/file.h> |
| #include <linux/fs.h> |
| #include <linux/kref.h> |
| #include <linux/kthread.h> |
| #include <linux/sched/signal.h> |
| #include <linux/limits.h> |
| #include <linux/rwsem.h> |
| #include <linux/slab.h> |
| #include <linux/spinlock.h> |
| #include <linux/string.h> |
| #include <linux/freezer.h> |
| #include <linux/module.h> |
| #include <linux/uaccess.h> |
| |
| #include <linux/usb/ch9.h> |
| #include <linux/usb/gadget.h> |
| #include <linux/usb/composite.h> |
| |
| #include "configfs.h" |
| |
| |
| /*------------------------------------------------------------------------*/ |
| |
| #define FSG_DRIVER_DESC "Mass Storage Function" |
| #define FSG_DRIVER_VERSION "2009/09/11" |
| |
| static const char fsg_string_interface[] = "Mass Storage"; |
| |
| #include "storage_common.h" |
| #include "f_mass_storage.h" |
| |
| /* Static strings, in UTF-8 (for simplicity we use only ASCII characters) */ |
| static struct usb_string fsg_strings[] = { |
| {FSG_STRING_INTERFACE, fsg_string_interface}, |
| {} |
| }; |
| |
| static struct usb_gadget_strings fsg_stringtab = { |
| .language = 0x0409, /* en-us */ |
| .strings = fsg_strings, |
| }; |
| |
| static struct usb_gadget_strings *fsg_strings_array[] = { |
| &fsg_stringtab, |
| NULL, |
| }; |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| struct fsg_dev; |
| struct fsg_common; |
| |
| /* Data shared by all the FSG instances. */ |
| struct fsg_common { |
| struct usb_gadget *gadget; |
| struct usb_composite_dev *cdev; |
| struct fsg_dev *fsg, *new_fsg; |
| wait_queue_head_t io_wait; |
| wait_queue_head_t fsg_wait; |
| |
| /* filesem protects: backing files in use */ |
| struct rw_semaphore filesem; |
| |
| /* lock protects: state and thread_task */ |
| spinlock_t lock; |
| |
| struct usb_ep *ep0; /* Copy of gadget->ep0 */ |
| struct usb_request *ep0req; /* Copy of cdev->req */ |
| unsigned int ep0_req_tag; |
| |
| struct fsg_buffhd *next_buffhd_to_fill; |
| struct fsg_buffhd *next_buffhd_to_drain; |
| struct fsg_buffhd *buffhds; |
| unsigned int fsg_num_buffers; |
| |
| int cmnd_size; |
| u8 cmnd[MAX_COMMAND_SIZE]; |
| |
| unsigned int lun; |
| struct fsg_lun *luns[FSG_MAX_LUNS]; |
| struct fsg_lun *curlun; |
| |
| unsigned int bulk_out_maxpacket; |
| enum fsg_state state; /* For exception handling */ |
| unsigned int exception_req_tag; |
| |
| enum data_direction data_dir; |
| u32 data_size; |
| u32 data_size_from_cmnd; |
| u32 tag; |
| u32 residue; |
| u32 usb_amount_left; |
| |
| unsigned int can_stall:1; |
| unsigned int free_storage_on_release:1; |
| unsigned int phase_error:1; |
| unsigned int short_packet_received:1; |
| unsigned int bad_lun_okay:1; |
| unsigned int running:1; |
| unsigned int sysfs:1; |
| |
| struct completion thread_notifier; |
| struct task_struct *thread_task; |
| |
| /* Callback functions. */ |
| const struct fsg_operations *ops; |
| /* Gadget's private data. */ |
| void *private_data; |
| |
| char inquiry_string[INQUIRY_STRING_LEN]; |
| |
| struct kref ref; |
| }; |
| |
| struct fsg_dev { |
| struct usb_function function; |
| struct usb_gadget *gadget; /* Copy of cdev->gadget */ |
| struct fsg_common *common; |
| |
| u16 interface_number; |
| |
| unsigned int bulk_in_enabled:1; |
| unsigned int bulk_out_enabled:1; |
| |
| unsigned long atomic_bitflags; |
| #define IGNORE_BULK_OUT 0 |
| |
| struct usb_ep *bulk_in; |
| struct usb_ep *bulk_out; |
| }; |
| |
| static inline int __fsg_is_set(struct fsg_common *common, |
| const char *func, unsigned line) |
| { |
| if (common->fsg) |
| return 1; |
| ERROR(common, "common->fsg is NULL in %s at %u\n", func, line); |
| WARN_ON(1); |
| return 0; |
| } |
| |
| #define fsg_is_set(common) likely(__fsg_is_set(common, __func__, __LINE__)) |
| |
| static inline struct fsg_dev *fsg_from_func(struct usb_function *f) |
| { |
| return container_of(f, struct fsg_dev, function); |
| } |
| |
| typedef void (*fsg_routine_t)(struct fsg_dev *); |
| |
| static int exception_in_progress(struct fsg_common *common) |
| { |
| return common->state > FSG_STATE_NORMAL; |
| } |
| |
| /* Make bulk-out requests be divisible by the maxpacket size */ |
| static void set_bulk_out_req_length(struct fsg_common *common, |
| struct fsg_buffhd *bh, unsigned int length) |
| { |
| unsigned int rem; |
| |
| bh->bulk_out_intended_length = length; |
| rem = length % common->bulk_out_maxpacket; |
| if (rem > 0) |
| length += common->bulk_out_maxpacket - rem; |
| bh->outreq->length = length; |
| } |
| |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep) |
| { |
| const char *name; |
| |
| if (ep == fsg->bulk_in) |
| name = "bulk-in"; |
| else if (ep == fsg->bulk_out) |
| name = "bulk-out"; |
| else |
| name = ep->name; |
| DBG(fsg, "%s set halt\n", name); |
| return usb_ep_set_halt(ep); |
| } |
| |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* These routines may be called in process context or in_irq */ |
| |
| static void raise_exception(struct fsg_common *common, enum fsg_state new_state) |
| { |
| unsigned long flags; |
| |
| /* |
| * Do nothing if a higher-priority exception is already in progress. |
| * If a lower-or-equal priority exception is in progress, preempt it |
| * and notify the main thread by sending it a signal. |
| */ |
| spin_lock_irqsave(&common->lock, flags); |
| if (common->state <= new_state) { |
| common->exception_req_tag = common->ep0_req_tag; |
| common->state = new_state; |
| if (common->thread_task) |
| send_sig_info(SIGUSR1, SEND_SIG_FORCED, |
| common->thread_task); |
| } |
| spin_unlock_irqrestore(&common->lock, flags); |
| } |
| |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static int ep0_queue(struct fsg_common *common) |
| { |
| int rc; |
| |
| rc = usb_ep_queue(common->ep0, common->ep0req, GFP_ATOMIC); |
| common->ep0->driver_data = common; |
| if (rc != 0 && rc != -ESHUTDOWN) { |
| /* We can't do much more than wait for a reset */ |
| WARNING(common, "error in submission: %s --> %d\n", |
| common->ep0->name, rc); |
| } |
| return rc; |
| } |
| |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* Completion handlers. These always run in_irq. */ |
| |
| static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req) |
| { |
| struct fsg_common *common = ep->driver_data; |
| struct fsg_buffhd *bh = req->context; |
| |
| if (req->status || req->actual != req->length) |
| DBG(common, "%s --> %d, %u/%u\n", __func__, |
| req->status, req->actual, req->length); |
| if (req->status == -ECONNRESET) /* Request was cancelled */ |
| usb_ep_fifo_flush(ep); |
| |
| /* Synchronize with the smp_load_acquire() in sleep_thread() */ |
| smp_store_release(&bh->state, BUF_STATE_EMPTY); |
| wake_up(&common->io_wait); |
| } |
| |
| static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req) |
| { |
| struct fsg_common *common = ep->driver_data; |
| struct fsg_buffhd *bh = req->context; |
| |
| dump_msg(common, "bulk-out", req->buf, req->actual); |
| if (req->status || req->actual != bh->bulk_out_intended_length) |
| DBG(common, "%s --> %d, %u/%u\n", __func__, |
| req->status, req->actual, bh->bulk_out_intended_length); |
| if (req->status == -ECONNRESET) /* Request was cancelled */ |
| usb_ep_fifo_flush(ep); |
| |
| /* Synchronize with the smp_load_acquire() in sleep_thread() */ |
| smp_store_release(&bh->state, BUF_STATE_FULL); |
| wake_up(&common->io_wait); |
| } |
| |
| static int _fsg_common_get_max_lun(struct fsg_common *common) |
| { |
| int i = ARRAY_SIZE(common->luns) - 1; |
| |
| while (i >= 0 && !common->luns[i]) |
| --i; |
| |
| return i; |
| } |
| |
| static int fsg_setup(struct usb_function *f, |
| const struct usb_ctrlrequest *ctrl) |
| { |
| struct fsg_dev *fsg = fsg_from_func(f); |
| struct usb_request *req = fsg->common->ep0req; |
| u16 w_index = le16_to_cpu(ctrl->wIndex); |
| u16 w_value = le16_to_cpu(ctrl->wValue); |
| u16 w_length = le16_to_cpu(ctrl->wLength); |
| |
| if (!fsg_is_set(fsg->common)) |
| return -EOPNOTSUPP; |
| |
| ++fsg->common->ep0_req_tag; /* Record arrival of a new request */ |
| req->context = NULL; |
| req->length = 0; |
| dump_msg(fsg, "ep0-setup", (u8 *) ctrl, sizeof(*ctrl)); |
| |
| switch (ctrl->bRequest) { |
| |
| case US_BULK_RESET_REQUEST: |
| if (ctrl->bRequestType != |
| (USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE)) |
| break; |
| if (w_index != fsg->interface_number || w_value != 0 || |
| w_length != 0) |
| return -EDOM; |
| |
| /* |
| * Raise an exception to stop the current operation |
| * and reinitialize our state. |
| */ |
| DBG(fsg, "bulk reset request\n"); |
| raise_exception(fsg->common, FSG_STATE_PROTOCOL_RESET); |
| return USB_GADGET_DELAYED_STATUS; |
| |
| case US_BULK_GET_MAX_LUN: |
| if (ctrl->bRequestType != |
| (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE)) |
| break; |
| if (w_index != fsg->interface_number || w_value != 0 || |
| w_length != 1) |
| return -EDOM; |
| VDBG(fsg, "get max LUN\n"); |
| *(u8 *)req->buf = _fsg_common_get_max_lun(fsg->common); |
| |
| /* Respond with data/status */ |
| req->length = min((u16)1, w_length); |
| return ep0_queue(fsg->common); |
| } |
| |
| VDBG(fsg, |
| "unknown class-specific control req %02x.%02x v%04x i%04x l%u\n", |
| ctrl->bRequestType, ctrl->bRequest, |
| le16_to_cpu(ctrl->wValue), w_index, w_length); |
| return -EOPNOTSUPP; |
| } |
| |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* All the following routines run in process context */ |
| |
| /* Use this for bulk or interrupt transfers, not ep0 */ |
| static int start_transfer(struct fsg_dev *fsg, struct usb_ep *ep, |
| struct usb_request *req) |
| { |
| int rc; |
| |
| if (ep == fsg->bulk_in) |
| dump_msg(fsg, "bulk-in", req->buf, req->length); |
| |
| rc = usb_ep_queue(ep, req, GFP_KERNEL); |
| if (rc) { |
| |
| /* We can't do much more than wait for a reset */ |
| req->status = rc; |
| |
| /* |
| * Note: currently the net2280 driver fails zero-length |
| * submissions if DMA is enabled. |
| */ |
| if (rc != -ESHUTDOWN && |
| !(rc == -EOPNOTSUPP && req->length == 0)) |
| WARNING(fsg, "error in submission: %s --> %d\n", |
| ep->name, rc); |
| } |
| return rc; |
| } |
| |
| static bool start_in_transfer(struct fsg_common *common, struct fsg_buffhd *bh) |
| { |
| if (!fsg_is_set(common)) |
| return false; |
| bh->state = BUF_STATE_SENDING; |
| if (start_transfer(common->fsg, common->fsg->bulk_in, bh->inreq)) |
| bh->state = BUF_STATE_EMPTY; |
| return true; |
| } |
| |
| static bool start_out_transfer(struct fsg_common *common, struct fsg_buffhd *bh) |
| { |
| if (!fsg_is_set(common)) |
| return false; |
| bh->state = BUF_STATE_RECEIVING; |
| if (start_transfer(common->fsg, common->fsg->bulk_out, bh->outreq)) |
| bh->state = BUF_STATE_FULL; |
| return true; |
| } |
| |
| static int sleep_thread(struct fsg_common *common, bool can_freeze, |
| struct fsg_buffhd *bh) |
| { |
| int rc; |
| |
| /* Wait until a signal arrives or bh is no longer busy */ |
| if (can_freeze) |
| /* |
| * synchronize with the smp_store_release(&bh->state) in |
| * bulk_in_complete() or bulk_out_complete() |
| */ |
| rc = wait_event_freezable(common->io_wait, |
| bh && smp_load_acquire(&bh->state) >= |
| BUF_STATE_EMPTY); |
| else |
| rc = wait_event_interruptible(common->io_wait, |
| bh && smp_load_acquire(&bh->state) >= |
| BUF_STATE_EMPTY); |
| return rc ? -EINTR : 0; |
| } |
| |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static int do_read(struct fsg_common *common) |
| { |
| struct fsg_lun *curlun = common->curlun; |
| u32 lba; |
| struct fsg_buffhd *bh; |
| int rc; |
| u32 amount_left; |
| loff_t file_offset, file_offset_tmp; |
| unsigned int amount; |
| ssize_t nread; |
| |
| /* |
| * Get the starting Logical Block Address and check that it's |
| * not too big. |
| */ |
| if (common->cmnd[0] == READ_6) |
| lba = get_unaligned_be24(&common->cmnd[1]); |
| else { |
| lba = get_unaligned_be32(&common->cmnd[2]); |
| |
| /* |
| * We allow DPO (Disable Page Out = don't save data in the |
| * cache) and FUA (Force Unit Access = don't read from the |
| * cache), but we don't implement them. |
| */ |
| if ((common->cmnd[1] & ~0x18) != 0) { |
| curlun->sense_data = SS_INVALID_FIELD_IN_CDB; |
| return -EINVAL; |
| } |
| } |
| if (lba >= curlun->num_sectors) { |
| curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; |
| return -EINVAL; |
| } |
| file_offset = ((loff_t) lba) << curlun->blkbits; |
| |
| /* Carry out the file reads */ |
| amount_left = common->data_size_from_cmnd; |
| if (unlikely(amount_left == 0)) |
| return -EIO; /* No default reply */ |
| |
| for (;;) { |
| /* |
| * Figure out how much we need to read: |
| * Try to read the remaining amount. |
| * But don't read more than the buffer size. |
| * And don't try to read past the end of the file. |
| */ |
| amount = min(amount_left, FSG_BUFLEN); |
| amount = min((loff_t)amount, |
| curlun->file_length - file_offset); |
| |
| /* Wait for the next buffer to become available */ |
| bh = common->next_buffhd_to_fill; |
| rc = sleep_thread(common, false, bh); |
| if (rc) |
| return rc; |
| |
| /* |
| * If we were asked to read past the end of file, |
| * end with an empty buffer. |
| */ |
| if (amount == 0) { |
| curlun->sense_data = |
| SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; |
| curlun->sense_data_info = |
| file_offset >> curlun->blkbits; |
| curlun->info_valid = 1; |
| bh->inreq->length = 0; |
| bh->state = BUF_STATE_FULL; |
| break; |
| } |
| |
| /* Perform the read */ |
| file_offset_tmp = file_offset; |
| nread = vfs_read(curlun->filp, |
| (char __user *)bh->buf, |
| amount, &file_offset_tmp); |
| VLDBG(curlun, "file read %u @ %llu -> %d\n", amount, |
| (unsigned long long)file_offset, (int)nread); |
| if (signal_pending(current)) |
| return -EINTR; |
| |
| if (nread < 0) { |
| LDBG(curlun, "error in file read: %d\n", (int)nread); |
| nread = 0; |
| } else if (nread < amount) { |
| LDBG(curlun, "partial file read: %d/%u\n", |
| (int)nread, amount); |
| nread = round_down(nread, curlun->blksize); |
| } |
| file_offset += nread; |
| amount_left -= nread; |
| common->residue -= nread; |
| |
| /* |
| * Except at the end of the transfer, nread will be |
| * equal to the buffer size, which is divisible by the |
| * bulk-in maxpacket size. |
| */ |
| bh->inreq->length = nread; |
| bh->state = BUF_STATE_FULL; |
| |
| /* If an error occurred, report it and its position */ |
| if (nread < amount) { |
| curlun->sense_data = SS_UNRECOVERED_READ_ERROR; |
| curlun->sense_data_info = |
| file_offset >> curlun->blkbits; |
| curlun->info_valid = 1; |
| break; |
| } |
| |
| if (amount_left == 0) |
| break; /* No more left to read */ |
| |
| /* Send this buffer and go read some more */ |
| bh->inreq->zero = 0; |
| if (!start_in_transfer(common, bh)) |
| /* Don't know what to do if common->fsg is NULL */ |
| return -EIO; |
| common->next_buffhd_to_fill = bh->next; |
| } |
| |
| return -EIO; /* No default reply */ |
| } |
| |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static int do_write(struct fsg_common *common) |
| { |
| struct fsg_lun *curlun = common->curlun; |
| u32 lba; |
| struct fsg_buffhd *bh; |
| int get_some_more; |
| u32 amount_left_to_req, amount_left_to_write; |
| loff_t usb_offset, file_offset, file_offset_tmp; |
| unsigned int amount; |
| ssize_t nwritten; |
| int rc; |
| |
| if (curlun->ro) { |
| curlun->sense_data = SS_WRITE_PROTECTED; |
| return -EINVAL; |
| } |
| spin_lock(&curlun->filp->f_lock); |
| curlun->filp->f_flags &= ~O_SYNC; /* Default is not to wait */ |
| spin_unlock(&curlun->filp->f_lock); |
| |
| /* |
| * Get the starting Logical Block Address and check that it's |
| * not too big |
| */ |
| if (common->cmnd[0] == WRITE_6) |
| lba = get_unaligned_be24(&common->cmnd[1]); |
| else { |
| lba = get_unaligned_be32(&common->cmnd[2]); |
| |
| /* |
| * We allow DPO (Disable Page Out = don't save data in the |
| * cache) and FUA (Force Unit Access = write directly to the |
| * medium). We don't implement DPO; we implement FUA by |
| * performing synchronous output. |
| */ |
| if (common->cmnd[1] & ~0x18) { |
| curlun->sense_data = SS_INVALID_FIELD_IN_CDB; |
| return -EINVAL; |
| } |
| if (!curlun->nofua && (common->cmnd[1] & 0x08)) { /* FUA */ |
| spin_lock(&curlun->filp->f_lock); |
| curlun->filp->f_flags |= O_SYNC; |
| spin_unlock(&curlun->filp->f_lock); |
| } |
| } |
| if (lba >= curlun->num_sectors) { |
| curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; |
| return -EINVAL; |
| } |
| |
| /* Carry out the file writes */ |
| get_some_more = 1; |
| file_offset = usb_offset = ((loff_t) lba) << curlun->blkbits; |
| amount_left_to_req = common->data_size_from_cmnd; |
| amount_left_to_write = common->data_size_from_cmnd; |
| |
| while (amount_left_to_write > 0) { |
| |
| /* Queue a request for more data from the host */ |
| bh = common->next_buffhd_to_fill; |
| if (bh->state == BUF_STATE_EMPTY && get_some_more) { |
| |
| /* |
| * Figure out how much we want to get: |
| * Try to get the remaining amount, |
| * but not more than the buffer size. |
| */ |
| amount = min(amount_left_to_req, FSG_BUFLEN); |
| |
| /* Beyond the end of the backing file? */ |
| if (usb_offset >= curlun->file_length) { |
| get_some_more = 0; |
| curlun->sense_data = |
| SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; |
| curlun->sense_data_info = |
| usb_offset >> curlun->blkbits; |
| curlun->info_valid = 1; |
| continue; |
| } |
| |
| /* Get the next buffer */ |
| usb_offset += amount; |
| common->usb_amount_left -= amount; |
| amount_left_to_req -= amount; |
| if (amount_left_to_req == 0) |
| get_some_more = 0; |
| |
| /* |
| * Except at the end of the transfer, amount will be |
| * equal to the buffer size, which is divisible by |
| * the bulk-out maxpacket size. |
| */ |
| set_bulk_out_req_length(common, bh, amount); |
| if (!start_out_transfer(common, bh)) |
| /* Dunno what to do if common->fsg is NULL */ |
| return -EIO; |
| common->next_buffhd_to_fill = bh->next; |
| continue; |
| } |
| |
| /* Write the received data to the backing file */ |
| bh = common->next_buffhd_to_drain; |
| if (bh->state == BUF_STATE_EMPTY && !get_some_more) |
| break; /* We stopped early */ |
| |
| /* Wait for the data to be received */ |
| rc = sleep_thread(common, false, bh); |
| if (rc) |
| return rc; |
| |
| common->next_buffhd_to_drain = bh->next; |
| bh->state = BUF_STATE_EMPTY; |
| |
| /* Did something go wrong with the transfer? */ |
| if (bh->outreq->status != 0) { |
| curlun->sense_data = SS_COMMUNICATION_FAILURE; |
| curlun->sense_data_info = |
| file_offset >> curlun->blkbits; |
| curlun->info_valid = 1; |
| break; |
| } |
| |
| amount = bh->outreq->actual; |
| if (curlun->file_length - file_offset < amount) { |
| LERROR(curlun, "write %u @ %llu beyond end %llu\n", |
| amount, (unsigned long long)file_offset, |
| (unsigned long long)curlun->file_length); |
| amount = curlun->file_length - file_offset; |
| } |
| |
| /* |
| * Don't accept excess data. The spec doesn't say |
| * what to do in this case. We'll ignore the error. |
| */ |
| amount = min(amount, bh->bulk_out_intended_length); |
| |
| /* Don't write a partial block */ |
| amount = round_down(amount, curlun->blksize); |
| if (amount == 0) |
| goto empty_write; |
| |
| /* Perform the write */ |
| file_offset_tmp = file_offset; |
| nwritten = vfs_write(curlun->filp, (char __user *)bh->buf, |
| amount, &file_offset_tmp); |
| VLDBG(curlun, "file write %u @ %llu -> %d\n", amount, |
| (unsigned long long)file_offset, (int)nwritten); |
| if (signal_pending(current)) |
| return -EINTR; /* Interrupted! */ |
| |
| if (nwritten < 0) { |
| LDBG(curlun, "error in file write: %d\n", |
| (int) nwritten); |
| nwritten = 0; |
| } else if (nwritten < amount) { |
| LDBG(curlun, "partial file write: %d/%u\n", |
| (int) nwritten, amount); |
| nwritten = round_down(nwritten, curlun->blksize); |
| } |
| file_offset += nwritten; |
| amount_left_to_write -= nwritten; |
| common->residue -= nwritten; |
| |
| /* If an error occurred, report it and its position */ |
| if (nwritten < amount) { |
| curlun->sense_data = SS_WRITE_ERROR; |
| curlun->sense_data_info = |
| file_offset >> curlun->blkbits; |
| curlun->info_valid = 1; |
| break; |
| } |
| |
| empty_write: |
| /* Did the host decide to stop early? */ |
| if (bh->outreq->actual < bh->bulk_out_intended_length) { |
| common->short_packet_received = 1; |
| break; |
| } |
| } |
| |
| return -EIO; /* No default reply */ |
| } |
| |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static int do_synchronize_cache(struct fsg_common *common) |
| { |
| struct fsg_lun *curlun = common->curlun; |
| int rc; |
| |
| /* We ignore the requested LBA and write out all file's |
| * dirty data buffers. */ |
| rc = fsg_lun_fsync_sub(curlun); |
| if (rc) |
| curlun->sense_data = SS_WRITE_ERROR; |
| return 0; |
| } |
| |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static void invalidate_sub(struct fsg_lun *curlun) |
| { |
| struct file *filp = curlun->filp; |
| struct inode *inode = file_inode(filp); |
| unsigned long rc; |
| |
| rc = invalidate_mapping_pages(inode->i_mapping, 0, -1); |
| VLDBG(curlun, "invalidate_mapping_pages -> %ld\n", rc); |
| } |
| |
| static int do_verify(struct fsg_common *common) |
| { |
| struct fsg_lun *curlun = common->curlun; |
| u32 lba; |
| u32 verification_length; |
| struct fsg_buffhd *bh = common->next_buffhd_to_fill; |
| loff_t file_offset, file_offset_tmp; |
| u32 amount_left; |
| unsigned int amount; |
| ssize_t nread; |
| |
| /* |
| * Get the starting Logical Block Address and check that it's |
| * not too big. |
| */ |
| lba = get_unaligned_be32(&common->cmnd[2]); |
| if (lba >= curlun->num_sectors) { |
| curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; |
| return -EINVAL; |
| } |
| |
| /* |
| * We allow DPO (Disable Page Out = don't save data in the |
| * cache) but we don't implement it. |
| */ |
| if (common->cmnd[1] & ~0x10) { |
| curlun->sense_data = SS_INVALID_FIELD_IN_CDB; |
| return -EINVAL; |
| } |
| |
| verification_length = get_unaligned_be16(&common->cmnd[7]); |
| if (unlikely(verification_length == 0)) |
| return -EIO; /* No default reply */ |
| |
| /* Prepare to carry out the file verify */ |
| amount_left = verification_length << curlun->blkbits; |
| file_offset = ((loff_t) lba) << curlun->blkbits; |
| |
| /* Write out all the dirty buffers before invalidating them */ |
| fsg_lun_fsync_sub(curlun); |
| if (signal_pending(current)) |
| return -EINTR; |
| |
| invalidate_sub(curlun); |
| if (signal_pending(current)) |
| return -EINTR; |
| |
| /* Just try to read the requested blocks */ |
| while (amount_left > 0) { |
| /* |
| * Figure out how much we need to read: |
| * Try to read the remaining amount, but not more than |
| * the buffer size. |
| * And don't try to read past the end of the file. |
| */ |
| amount = min(amount_left, FSG_BUFLEN); |
| amount = min((loff_t)amount, |
| curlun->file_length - file_offset); |
| if (amount == 0) { |
| curlun->sense_data = |
| SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; |
| curlun->sense_data_info = |
| file_offset >> curlun->blkbits; |
| curlun->info_valid = 1; |
| break; |
| } |
| |
| /* Perform the read */ |
| file_offset_tmp = file_offset; |
| nread = vfs_read(curlun->filp, |
| (char __user *) bh->buf, |
| amount, &file_offset_tmp); |
| VLDBG(curlun, "file read %u @ %llu -> %d\n", amount, |
| (unsigned long long) file_offset, |
| (int) nread); |
| if (signal_pending(current)) |
| return -EINTR; |
| |
| if (nread < 0) { |
| LDBG(curlun, "error in file verify: %d\n", (int)nread); |
| nread = 0; |
| } else if (nread < amount) { |
| LDBG(curlun, "partial file verify: %d/%u\n", |
| (int)nread, amount); |
| nread = round_down(nread, curlun->blksize); |
| } |
| if (nread == 0) { |
| curlun->sense_data = SS_UNRECOVERED_READ_ERROR; |
| curlun->sense_data_info = |
| file_offset >> curlun->blkbits; |
| curlun->info_valid = 1; |
| break; |
| } |
| file_offset += nread; |
| amount_left -= nread; |
| } |
| return 0; |
| } |
| |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static int do_inquiry(struct fsg_common *common, struct fsg_buffhd *bh) |
| { |
| struct fsg_lun *curlun = common->curlun; |
| u8 *buf = (u8 *) bh->buf; |
| |
| if (!curlun) { /* Unsupported LUNs are okay */ |
| common->bad_lun_okay = 1; |
| memset(buf, 0, 36); |
| buf[0] = TYPE_NO_LUN; /* Unsupported, no device-type */ |
| buf[4] = 31; /* Additional length */ |
| return 36; |
| } |
| |
| buf[0] = curlun->cdrom ? TYPE_ROM : TYPE_DISK; |
| buf[1] = curlun->removable ? 0x80 : 0; |
| buf[2] = 2; /* ANSI SCSI level 2 */ |
| buf[3] = 2; /* SCSI-2 INQUIRY data format */ |
| buf[4] = 31; /* Additional length */ |
| buf[5] = 0; /* No special options */ |
| buf[6] = 0; |
| buf[7] = 0; |
| if (curlun->inquiry_string[0]) |
| memcpy(buf + 8, curlun->inquiry_string, |
| sizeof(curlun->inquiry_string)); |
| else |
| memcpy(buf + 8, common->inquiry_string, |
| sizeof(common->inquiry_string)); |
| return 36; |
| } |
| |
| static int do_request_sense(struct fsg_common *common, struct fsg_buffhd *bh) |
| { |
| struct fsg_lun *curlun = common->curlun; |
| u8 *buf = (u8 *) bh->buf; |
| u32 sd, sdinfo; |
| int valid; |
| |
| /* |
| * From the SCSI-2 spec., section 7.9 (Unit attention condition): |
| * |
| * If a REQUEST SENSE command is received from an initiator |
| * with a pending unit attention condition (before the target |
| * generates the contingent allegiance condition), then the |
| * target shall either: |
| * a) report any pending sense data and preserve the unit |
| * attention condition on the logical unit, or, |
| * b) report the unit attention condition, may discard any |
| * pending sense data, and clear the unit attention |
| * condition on the logical unit for that initiator. |
| * |
| * FSG normally uses option a); enable this code to use option b). |
| */ |
| #if 0 |
| if (curlun && curlun->unit_attention_data != SS_NO_SENSE) { |
| curlun->sense_data = curlun->unit_attention_data; |
| curlun->unit_attention_data = SS_NO_SENSE; |
| } |
| #endif |
| |
| if (!curlun) { /* Unsupported LUNs are okay */ |
| common->bad_lun_okay = 1; |
| sd = SS_LOGICAL_UNIT_NOT_SUPPORTED; |
| sdinfo = 0; |
| valid = 0; |
| } else { |
| sd = curlun->sense_data; |
| sdinfo = curlun->sense_data_info; |
| valid = curlun->info_valid << 7; |
| curlun->sense_data = SS_NO_SENSE; |
| curlun->sense_data_info = 0; |
| curlun->info_valid = 0; |
| } |
| |
| memset(buf, 0, 18); |
| buf[0] = valid | 0x70; /* Valid, current error */ |
| buf[2] = SK(sd); |
| put_unaligned_be32(sdinfo, &buf[3]); /* Sense information */ |
| buf[7] = 18 - 8; /* Additional sense length */ |
| buf[12] = ASC(sd); |
| buf[13] = ASCQ(sd); |
| return 18; |
| } |
| |
| static int do_read_capacity(struct fsg_common *common, struct fsg_buffhd *bh) |
| { |
| struct fsg_lun *curlun = common->curlun; |
| u32 lba = get_unaligned_be32(&common->cmnd[2]); |
| int pmi = common->cmnd[8]; |
| u8 *buf = (u8 *)bh->buf; |
| |
| /* Check the PMI and LBA fields */ |
| if (pmi > 1 || (pmi == 0 && lba != 0)) { |
| curlun->sense_data = SS_INVALID_FIELD_IN_CDB; |
| return -EINVAL; |
| } |
| |
| put_unaligned_be32(curlun->num_sectors - 1, &buf[0]); |
| /* Max logical block */ |
| put_unaligned_be32(curlun->blksize, &buf[4]);/* Block length */ |
| return 8; |
| } |
| |
| static int do_read_header(struct fsg_common *common, struct fsg_buffhd *bh) |
| { |
| struct fsg_lun *curlun = common->curlun; |
| int msf = common->cmnd[1] & 0x02; |
| u32 lba = get_unaligned_be32(&common->cmnd[2]); |
| u8 *buf = (u8 *)bh->buf; |
| |
| if (common->cmnd[1] & ~0x02) { /* Mask away MSF */ |
| curlun->sense_data = SS_INVALID_FIELD_IN_CDB; |
| return -EINVAL; |
| } |
| if (lba >= curlun->num_sectors) { |
| curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; |
| return -EINVAL; |
| } |
| |
| memset(buf, 0, 8); |
| buf[0] = 0x01; /* 2048 bytes of user data, rest is EC */ |
| store_cdrom_address(&buf[4], msf, lba); |
| return 8; |
| } |
| |
| static int do_read_toc(struct fsg_common *common, struct fsg_buffhd *bh) |
| { |
| struct fsg_lun *curlun = common->curlun; |
| int msf = common->cmnd[1] & 0x02; |
| int start_track = common->cmnd[6]; |
| u8 *buf = (u8 *)bh->buf; |
| |
| if ((common->cmnd[1] & ~0x02) != 0 || /* Mask away MSF */ |
| start_track > 1) { |
| curlun->sense_data = SS_INVALID_FIELD_IN_CDB; |
| return -EINVAL; |
| } |
| |
| memset(buf, 0, 20); |
| buf[1] = (20-2); /* TOC data length */ |
| buf[2] = 1; /* First track number */ |
| buf[3] = 1; /* Last track number */ |
| buf[5] = 0x16; /* Data track, copying allowed */ |
| buf[6] = 0x01; /* Only track is number 1 */ |
| store_cdrom_address(&buf[8], msf, 0); |
| |
| buf[13] = 0x16; /* Lead-out track is data */ |
| buf[14] = 0xAA; /* Lead-out track number */ |
| store_cdrom_address(&buf[16], msf, curlun->num_sectors); |
| return 20; |
| } |
| |
| static int do_mode_sense(struct fsg_common *common, struct fsg_buffhd *bh) |
| { |
| struct fsg_lun *curlun = common->curlun; |
| int mscmnd = common->cmnd[0]; |
| u8 *buf = (u8 *) bh->buf; |
| u8 *buf0 = buf; |
| int pc, page_code; |
| int changeable_values, all_pages; |
| int valid_page = 0; |
| int len, limit; |
| |
| if ((common->cmnd[1] & ~0x08) != 0) { /* Mask away DBD */ |
| curlun->sense_data = SS_INVALID_FIELD_IN_CDB; |
| return -EINVAL; |
| } |
| pc = common->cmnd[2] >> 6; |
| page_code = common->cmnd[2] & 0x3f; |
| if (pc == 3) { |
| curlun->sense_data = SS_SAVING_PARAMETERS_NOT_SUPPORTED; |
| return -EINVAL; |
| } |
| changeable_values = (pc == 1); |
| all_pages = (page_code == 0x3f); |
| |
| /* |
| * Write the mode parameter header. Fixed values are: default |
| * medium type, no cache control (DPOFUA), and no block descriptors. |
| * The only variable value is the WriteProtect bit. We will fill in |
| * the mode data length later. |
| */ |
| memset(buf, 0, 8); |
| if (mscmnd == MODE_SENSE) { |
| buf[2] = (curlun->ro ? 0x80 : 0x00); /* WP, DPOFUA */ |
| buf += 4; |
| limit = 255; |
| } else { /* MODE_SENSE_10 */ |
| buf[3] = (curlun->ro ? 0x80 : 0x00); /* WP, DPOFUA */ |
| buf += 8; |
| limit = 65535; /* Should really be FSG_BUFLEN */ |
| } |
| |
| /* No block descriptors */ |
| |
| /* |
| * The mode pages, in numerical order. The only page we support |
| * is the Caching page. |
| */ |
| if (page_code == 0x08 || all_pages) { |
| valid_page = 1; |
| buf[0] = 0x08; /* Page code */ |
| buf[1] = 10; /* Page length */ |
| memset(buf+2, 0, 10); /* None of the fields are changeable */ |
| |
| if (!changeable_values) { |
| buf[2] = 0x04; /* Write cache enable, */ |
| /* Read cache not disabled */ |
| /* No cache retention priorities */ |
| put_unaligned_be16(0xffff, &buf[4]); |
| /* Don't disable prefetch */ |
| /* Minimum prefetch = 0 */ |
| put_unaligned_be16(0xffff, &buf[8]); |
| /* Maximum prefetch */ |
| put_unaligned_be16(0xffff, &buf[10]); |
| /* Maximum prefetch ceiling */ |
| } |
| buf += 12; |
| } |
| |
| /* |
| * Check that a valid page was requested and the mode data length |
| * isn't too long. |
| */ |
| len = buf - buf0; |
| if (!valid_page || len > limit) { |
| curlun->sense_data = SS_INVALID_FIELD_IN_CDB; |
| return -EINVAL; |
| } |
| |
| /* Store the mode data length */ |
| if (mscmnd == MODE_SENSE) |
| buf0[0] = len - 1; |
| else |
| put_unaligned_be16(len - 2, buf0); |
| return len; |
| } |
| |
| static int do_start_stop(struct fsg_common *common) |
| { |
| struct fsg_lun *curlun = common->curlun; |
| int loej, start; |
| |
| if (!curlun) { |
| return -EINVAL; |
| } else if (!curlun->removable) { |
| curlun->sense_data = SS_INVALID_COMMAND; |
| return -EINVAL; |
| } else if ((common->cmnd[1] & ~0x01) != 0 || /* Mask away Immed */ |
| (common->cmnd[4] & ~0x03) != 0) { /* Mask LoEj, Start */ |
| curlun->sense_data = SS_INVALID_FIELD_IN_CDB; |
| return -EINVAL; |
| } |
| |
| loej = common->cmnd[4] & 0x02; |
| start = common->cmnd[4] & 0x01; |
| |
| /* |
| * Our emulation doesn't support mounting; the medium is |
| * available for use as soon as it is loaded. |
| */ |
| if (start) { |
| if (!fsg_lun_is_open(curlun)) { |
| curlun->sense_data = SS_MEDIUM_NOT_PRESENT; |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| /* Are we allowed to unload the media? */ |
| if (curlun->prevent_medium_removal) { |
| LDBG(curlun, "unload attempt prevented\n"); |
| curlun->sense_data = SS_MEDIUM_REMOVAL_PREVENTED; |
| return -EINVAL; |
| } |
| |
| if (!loej) |
| return 0; |
| |
| up_read(&common->filesem); |
| down_write(&common->filesem); |
| fsg_lun_close(curlun); |
| up_write(&common->filesem); |
| down_read(&common->filesem); |
| |
| return 0; |
| } |
| |
| static int do_prevent_allow(struct fsg_common *common) |
| { |
| struct fsg_lun *curlun = common->curlun; |
| int prevent; |
| |
| if (!common->curlun) { |
| return -EINVAL; |
| } else if (!common->curlun->removable) { |
| common->curlun->sense_data = SS_INVALID_COMMAND; |
| return -EINVAL; |
| } |
| |
| prevent = common->cmnd[4] & 0x01; |
| if ((common->cmnd[4] & ~0x01) != 0) { /* Mask away Prevent */ |
| curlun->sense_data = SS_INVALID_FIELD_IN_CDB; |
| return -EINVAL; |
| } |
| |
| if (curlun->prevent_medium_removal && !prevent) |
| fsg_lun_fsync_sub(curlun); |
| curlun->prevent_medium_removal = prevent; |
| return 0; |
| } |
| |
| static int do_read_format_capacities(struct fsg_common *common, |
| struct fsg_buffhd *bh) |
| { |
| struct fsg_lun *curlun = common->curlun; |
| u8 *buf = (u8 *) bh->buf; |
| |
| buf[0] = buf[1] = buf[2] = 0; |
| buf[3] = 8; /* Only the Current/Maximum Capacity Descriptor */ |
| buf += 4; |
| |
| put_unaligned_be32(curlun->num_sectors, &buf[0]); |
| /* Number of blocks */ |
| put_unaligned_be32(curlun->blksize, &buf[4]);/* Block length */ |
| buf[4] = 0x02; /* Current capacity */ |
| return 12; |
| } |
| |
| static int do_mode_select(struct fsg_common *common, struct fsg_buffhd *bh) |
| { |
| struct fsg_lun *curlun = common->curlun; |
| |
| /* We don't support MODE SELECT */ |
| if (curlun) |
| curlun->sense_data = SS_INVALID_COMMAND; |
| return -EINVAL; |
| } |
| |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static int halt_bulk_in_endpoint(struct fsg_dev *fsg) |
| { |
| int rc; |
| |
| rc = fsg_set_halt(fsg, fsg->bulk_in); |
| if (rc == -EAGAIN) |
| VDBG(fsg, "delayed bulk-in endpoint halt\n"); |
| while (rc != 0) { |
| if (rc != -EAGAIN) { |
| WARNING(fsg, "usb_ep_set_halt -> %d\n", rc); |
| rc = 0; |
| break; |
| } |
| |
| /* Wait for a short time and then try again */ |
| if (msleep_interruptible(100) != 0) |
| return -EINTR; |
| rc = usb_ep_set_halt(fsg->bulk_in); |
| } |
| return rc; |
| } |
| |
| static int wedge_bulk_in_endpoint(struct fsg_dev *fsg) |
| { |
| int rc; |
| |
| DBG(fsg, "bulk-in set wedge\n"); |
| rc = usb_ep_set_wedge(fsg->bulk_in); |
| if (rc == -EAGAIN) |
| VDBG(fsg, "delayed bulk-in endpoint wedge\n"); |
| while (rc != 0) { |
| if (rc != -EAGAIN) { |
| WARNING(fsg, "usb_ep_set_wedge -> %d\n", rc); |
| rc = 0; |
| break; |
| } |
| |
| /* Wait for a short time and then try again */ |
| if (msleep_interruptible(100) != 0) |
| return -EINTR; |
| rc = usb_ep_set_wedge(fsg->bulk_in); |
| } |
| return rc; |
| } |
| |
| static int throw_away_data(struct fsg_common *common) |
| { |
| struct fsg_buffhd *bh, *bh2; |
| u32 amount; |
| int rc; |
| |
| for (bh = common->next_buffhd_to_drain; |
| bh->state != BUF_STATE_EMPTY || common->usb_amount_left > 0; |
| bh = common->next_buffhd_to_drain) { |
| |
| /* Try to submit another request if we need one */ |
| bh2 = common->next_buffhd_to_fill; |
| if (bh2->state == BUF_STATE_EMPTY && |
| common->usb_amount_left > 0) { |
| amount = min(common->usb_amount_left, FSG_BUFLEN); |
| |
| /* |
| * Except at the end of the transfer, amount will be |
| * equal to the buffer size, which is divisible by |
| * the bulk-out maxpacket size. |
| */ |
| set_bulk_out_req_length(common, bh2, amount); |
| if (!start_out_transfer(common, bh2)) |
| /* Dunno what to do if common->fsg is NULL */ |
| return -EIO; |
| common->next_buffhd_to_fill = bh2->next; |
| common->usb_amount_left -= amount; |
| continue; |
| } |
| |
| /* Wait for the data to be received */ |
| rc = sleep_thread(common, false, bh); |
| if (rc) |
| return rc; |
| |
| /* Throw away the data in a filled buffer */ |
| bh->state = BUF_STATE_EMPTY; |
| common->next_buffhd_to_drain = bh->next; |
| |
| /* A short packet or an error ends everything */ |
| if (bh->outreq->actual < bh->bulk_out_intended_length || |
| bh->outreq->status != 0) { |
| raise_exception(common, FSG_STATE_ABORT_BULK_OUT); |
| return -EINTR; |
| } |
| } |
| return 0; |
| } |
| |
| static int finish_reply(struct fsg_common *common) |
| { |
| struct fsg_buffhd *bh = common->next_buffhd_to_fill; |
| int rc = 0; |
| |
| switch (common->data_dir) { |
| case DATA_DIR_NONE: |
| break; /* Nothing to send */ |
| |
| /* |
| * If we don't know whether the host wants to read or write, |
| * this must be CB or CBI with an unknown command. We mustn't |
| * try to send or receive any data. So stall both bulk pipes |
| * if we can and wait for a reset. |
| */ |
| case DATA_DIR_UNKNOWN: |
| if (!common->can_stall) { |
| /* Nothing */ |
| } else if (fsg_is_set(common)) { |
| fsg_set_halt(common->fsg, common->fsg->bulk_out); |
| rc = halt_bulk_in_endpoint(common->fsg); |
| } else { |
| /* Don't know what to do if common->fsg is NULL */ |
| rc = -EIO; |
| } |
| break; |
| |
| /* All but the last buffer of data must have already been sent */ |
| case DATA_DIR_TO_HOST: |
| if (common->data_size == 0) { |
| /* Nothing to send */ |
| |
| /* Don't know what to do if common->fsg is NULL */ |
| } else if (!fsg_is_set(common)) { |
| rc = -EIO; |
| |
| /* If there's no residue, simply send the last buffer */ |
| } else if (common->residue == 0) { |
| bh->inreq->zero = 0; |
| if (!start_in_transfer(common, bh)) |
| return -EIO; |
| common->next_buffhd_to_fill = bh->next; |
| |
| /* |
| * For Bulk-only, mark the end of the data with a short |
| * packet. If we are allowed to stall, halt the bulk-in |
| * endpoint. (Note: This violates the Bulk-Only Transport |
| * specification, which requires us to pad the data if we |
| * don't halt the endpoint. Presumably nobody will mind.) |
| */ |
| } else { |
| bh->inreq->zero = 1; |
| if (!start_in_transfer(common, bh)) |
| rc = -EIO; |
| common->next_buffhd_to_fill = bh->next; |
| if (common->can_stall) |
| rc = halt_bulk_in_endpoint(common->fsg); |
| } |
| break; |
| |
| /* |
| * We have processed all we want from the data the host has sent. |
| * There may still be outstanding bulk-out requests. |
| */ |
| case DATA_DIR_FROM_HOST: |
| if (common->residue == 0) { |
| /* Nothing to receive */ |
| |
| /* Did the host stop sending unexpectedly early? */ |
| } else if (common->short_packet_received) { |
| raise_exception(common, FSG_STATE_ABORT_BULK_OUT); |
| rc = -EINTR; |
| |
| /* |
| * We haven't processed all the incoming data. Even though |
| * we may be allowed to stall, doing so would cause a race. |
| * The controller may already have ACK'ed all the remaining |
| * bulk-out packets, in which case the host wouldn't see a |
| * STALL. Not realizing the endpoint was halted, it wouldn't |
| * clear the halt -- leading to problems later on. |
| */ |
| #if 0 |
| } else if (common->can_stall) { |
| if (fsg_is_set(common)) |
| fsg_set_halt(common->fsg, |
| common->fsg->bulk_out); |
| raise_exception(common, FSG_STATE_ABORT_BULK_OUT); |
| rc = -EINTR; |
| #endif |
| |
| /* |
| * We can't stall. Read in the excess data and throw it |
| * all away. |
| */ |
| } else { |
| rc = throw_away_data(common); |
| } |
| break; |
| } |
| return rc; |
| } |
| |
| static void send_status(struct fsg_common *common) |
| { |
| struct fsg_lun *curlun = common->curlun; |
| struct fsg_buffhd *bh; |
| struct bulk_cs_wrap *csw; |
| int rc; |
| u8 status = US_BULK_STAT_OK; |
| u32 sd, sdinfo = 0; |
| |
| /* Wait for the next buffer to become available */ |
| bh = common->next_buffhd_to_fill; |
| rc = sleep_thread(common, false, bh); |
| if (rc) |
| return; |
| |
| if (curlun) { |
| sd = curlun->sense_data; |
| sdinfo = curlun->sense_data_info; |
| } else if (common->bad_lun_okay) |
| sd = SS_NO_SENSE; |
| else |
| sd = SS_LOGICAL_UNIT_NOT_SUPPORTED; |
| |
| if (common->phase_error) { |
| DBG(common, "sending phase-error status\n"); |
| status = US_BULK_STAT_PHASE; |
| sd = SS_INVALID_COMMAND; |
| } else if (sd != SS_NO_SENSE) { |
| DBG(common, "sending command-failure status\n"); |
| status = US_BULK_STAT_FAIL; |
| VDBG(common, " sense data: SK x%02x, ASC x%02x, ASCQ x%02x;" |
| " info x%x\n", |
| SK(sd), ASC(sd), ASCQ(sd), sdinfo); |
| } |
| |
| /* Store and send the Bulk-only CSW */ |
| csw = (void *)bh->buf; |
| |
| csw->Signature = cpu_to_le32(US_BULK_CS_SIGN); |
| csw->Tag = common->tag; |
| csw->Residue = cpu_to_le32(common->residue); |
| csw->Status = status; |
| |
| bh->inreq->length = US_BULK_CS_WRAP_LEN; |
| bh->inreq->zero = 0; |
| if (!start_in_transfer(common, bh)) |
| /* Don't know what to do if common->fsg is NULL */ |
| return; |
| |
| common->next_buffhd_to_fill = bh->next; |
| return; |
| } |
| |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* |
| * Check whether the command is properly formed and whether its data size |
| * and direction agree with the values we already have. |
| */ |
| static int check_command(struct fsg_common *common, int cmnd_size, |
| enum data_direction data_dir, unsigned int mask, |
| int needs_medium, const char *name) |
| { |
| int i; |
| unsigned int lun = common->cmnd[1] >> 5; |
| static const char dirletter[4] = {'u', 'o', 'i', 'n'}; |
| char hdlen[20]; |
| struct fsg_lun *curlun; |
| |
| hdlen[0] = 0; |
| if (common->data_dir != DATA_DIR_UNKNOWN) |
| sprintf(hdlen, ", H%c=%u", dirletter[(int) common->data_dir], |
| common->data_size); |
| VDBG(common, "SCSI command: %s; Dc=%d, D%c=%u; Hc=%d%s\n", |
| name, cmnd_size, dirletter[(int) data_dir], |
| common->data_size_from_cmnd, common->cmnd_size, hdlen); |
| |
| /* |
| * We can't reply at all until we know the correct data direction |
| * and size. |
| */ |
| if (common->data_size_from_cmnd == 0) |
| data_dir = DATA_DIR_NONE; |
| if (common->data_size < common->data_size_from_cmnd) { |
| /* |
| * Host data size < Device data size is a phase error. |
| * Carry out the command, but only transfer as much as |
| * we are allowed. |
| */ |
| common->data_size_from_cmnd = common->data_size; |
| common->phase_error = 1; |
| } |
| common->residue = common->data_size; |
| common->usb_amount_left = common->data_size; |
| |
| /* Conflicting data directions is a phase error */ |
| if (common->data_dir != data_dir && common->data_size_from_cmnd > 0) { |
| common->phase_error = 1; |
| return -EINVAL; |
| } |
| |
| /* Verify the length of the command itself */ |
| if (cmnd_size != common->cmnd_size) { |
| |
| /* |
| * Special case workaround: There are plenty of buggy SCSI |
| * implementations. Many have issues with cbw->Length |
| * field passing a wrong command size. For those cases we |
| * always try to work around the problem by using the length |
| * sent by the host side provided it is at least as large |
| * as the correct command length. |
| * Examples of such cases would be MS-Windows, which issues |
| * REQUEST SENSE with cbw->Length == 12 where it should |
| * be 6, and xbox360 issuing INQUIRY, TEST UNIT READY and |
| * REQUEST SENSE with cbw->Length == 10 where it should |
| * be 6 as well. |
| */ |
| if (cmnd_size <= common->cmnd_size) { |
| DBG(common, "%s is buggy! Expected length %d " |
| "but we got %d\n", name, |
| cmnd_size, common->cmnd_size); |
| cmnd_size = common->cmnd_size; |
| } else { |
| common->phase_error = 1; |
| return -EINVAL; |
| } |
| } |
| |
| /* Check that the LUN values are consistent */ |
| if (common->lun != lun) |
| DBG(common, "using LUN %u from CBW, not LUN %u from CDB\n", |
| common->lun, lun); |
| |
| /* Check the LUN */ |
| curlun = common->curlun; |
| if (curlun) { |
| if (common->cmnd[0] != REQUEST_SENSE) { |
| curlun->sense_data = SS_NO_SENSE; |
| curlun->sense_data_info = 0; |
| curlun->info_valid = 0; |
| } |
| } else { |
| common->bad_lun_okay = 0; |
| |
| /* |
| * INQUIRY and REQUEST SENSE commands are explicitly allowed |
| * to use unsupported LUNs; all others may not. |
| */ |
| if (common->cmnd[0] != INQUIRY && |
| common->cmnd[0] != REQUEST_SENSE) { |
| DBG(common, "unsupported LUN %u\n", common->lun); |
| return -EINVAL; |
| } |
| } |
| |
| /* |
| * If a unit attention condition exists, only INQUIRY and |
| * REQUEST SENSE commands are allowed; anything else must fail. |
| */ |
| if (curlun && curlun->unit_attention_data != SS_NO_SENSE && |
| common->cmnd[0] != INQUIRY && |
| common->cmnd[0] != REQUEST_SENSE) { |
| curlun->sense_data = curlun->unit_attention_data; |
| curlun->unit_attention_data = SS_NO_SENSE; |
| return -EINVAL; |
| } |
| |
| /* Check that only command bytes listed in the mask are non-zero */ |
| common->cmnd[1] &= 0x1f; /* Mask away the LUN */ |
| for (i = 1; i < cmnd_size; ++i) { |
| if (common->cmnd[i] && !(mask & (1 << i))) { |
| if (curlun) |
| curlun->sense_data = SS_INVALID_FIELD_IN_CDB; |
| return -EINVAL; |
| } |
| } |
| |
| /* If the medium isn't mounted and the command needs to access |
| * it, return an error. */ |
| if (curlun && !fsg_lun_is_open(curlun) && needs_medium) { |
| curlun->sense_data = SS_MEDIUM_NOT_PRESENT; |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| /* wrapper of check_command for data size in blocks handling */ |
| static int check_command_size_in_blocks(struct fsg_common *common, |
| int cmnd_size, enum data_direction data_dir, |
| unsigned int mask, int needs_medium, const char *name) |
| { |
| if (common->curlun) |
| common->data_size_from_cmnd <<= common->curlun->blkbits; |
| return check_command(common, cmnd_size, data_dir, |
| mask, needs_medium, name); |
| } |
| |
| static int do_scsi_command(struct fsg_common *common) |
| { |
| struct fsg_buffhd *bh; |
| int rc; |
| int reply = -EINVAL; |
| int i; |
| static char unknown[16]; |
| |
| dump_cdb(common); |
| |
| /* Wait for the next buffer to become available for data or status */ |
| bh = common->next_buffhd_to_fill; |
| common->next_buffhd_to_drain = bh; |
| rc = sleep_thread(common, false, bh); |
| if (rc) |
| return rc; |
| |
| common->phase_error = 0; |
| common->short_packet_received = 0; |
| |
| down_read(&common->filesem); /* We're using the backing file */ |
| switch (common->cmnd[0]) { |
| |
| case INQUIRY: |
| common->data_size_from_cmnd = common->cmnd[4]; |
| reply = check_command(common, 6, DATA_DIR_TO_HOST, |
| (1<<4), 0, |
| "INQUIRY"); |
| if (reply == 0) |
| reply = do_inquiry(common, bh); |
| break; |
| |
| case MODE_SELECT: |
| common->data_size_from_cmnd = common->cmnd[4]; |
| reply = check_command(common, 6, DATA_DIR_FROM_HOST, |
| (1<<1) | (1<<4), 0, |
| "MODE SELECT(6)"); |
| if (reply == 0) |
| reply = do_mode_select(common, bh); |
| break; |
| |
| case MODE_SELECT_10: |
| common->data_size_from_cmnd = |
| get_unaligned_be16(&common->cmnd[7]); |
| reply = check_command(common, 10, DATA_DIR_FROM_HOST, |
| (1<<1) | (3<<7), 0, |
| "MODE SELECT(10)"); |
| if (reply == 0) |
| reply = do_mode_select(common, bh); |
| break; |
| |
| case MODE_SENSE: |
| common->data_size_from_cmnd = common->cmnd[4]; |
| reply = check_command(common, 6, DATA_DIR_TO_HOST, |
| (1<<1) | (1<<2) | (1<<4), 0, |
| "MODE SENSE(6)"); |
| if (reply == 0) |
| reply = do_mode_sense(common, bh); |
| break; |
| |
| case MODE_SENSE_10: |
| common->data_size_from_cmnd = |
| get_unaligned_be16(&common->cmnd[7]); |
| reply = check_command(common, 10, DATA_DIR_TO_HOST, |
| (1<<1) | (1<<2) | (3<<7), 0, |
| "MODE SENSE(10)"); |
| if (reply == 0) |
| reply = do_mode_sense(common, bh); |
| break; |
| |
| case ALLOW_MEDIUM_REMOVAL: |
| common->data_size_from_cmnd = 0; |
| reply = check_command(common, 6, DATA_DIR_NONE, |
| (1<<4), 0, |
| "PREVENT-ALLOW MEDIUM REMOVAL"); |
| if (reply == 0) |
| reply = do_prevent_allow(common); |
| break; |
| |
| case READ_6: |
| i = common->cmnd[4]; |
| common->data_size_from_cmnd = (i == 0) ? 256 : i; |
| reply = check_command_size_in_blocks(common, 6, |
| DATA_DIR_TO_HOST, |
| (7<<1) | (1<<4), 1, |
| "READ(6)"); |
| if (reply == 0) |
| reply = do_read(common); |
| break; |
| |
| case READ_10: |
| common->data_size_from_cmnd = |
| get_unaligned_be16(&common->cmnd[7]); |
| reply = check_command_size_in_blocks(common, 10, |
| DATA_DIR_TO_HOST, |
| (1<<1) | (0xf<<2) | (3<<7), 1, |
| "READ(10)"); |
| if (reply == 0) |
| reply = do_read(common); |
| break; |
| |
| case READ_12: |
| common->data_size_from_cmnd = |
| get_unaligned_be32(&common->cmnd[6]); |
| reply = check_command_size_in_blocks(common, 12, |
| DATA_DIR_TO_HOST, |
| (1<<1) | (0xf<<2) | (0xf<<6), 1, |
| "READ(12)"); |
| if (reply == 0) |
| reply = do_read(common); |
| break; |
| |
| case READ_CAPACITY: |
| common->data_size_from_cmnd = 8; |
| reply = check_command(common, 10, DATA_DIR_TO_HOST, |
| (0xf<<2) | (1<<8), 1, |
| "READ CAPACITY"); |
| if (reply == 0) |
| reply = do_read_capacity(common, bh); |
| break; |
| |
| case READ_HEADER: |
| if (!common->curlun || !common->curlun->cdrom) |
| goto unknown_cmnd; |
| common->data_size_from_cmnd = |
| get_unaligned_be16(&common->cmnd[7]); |
| reply = check_command(common, 10, DATA_DIR_TO_HOST, |
| (3<<7) | (0x1f<<1), 1, |
| "READ HEADER"); |
| if (reply == 0) |
| reply = do_read_header(common, bh); |
| break; |
| |
| case READ_TOC: |
| if (!common->curlun || !common->curlun->cdrom) |
| goto unknown_cmnd; |
| common->data_size_from_cmnd = |
| get_unaligned_be16(&common->cmnd[7]); |
| reply = check_command(common, 10, DATA_DIR_TO_HOST, |
| (7<<6) | (1<<1), 1, |
| "READ TOC"); |
| if (reply == 0) |
| reply = do_read_toc(common, bh); |
| break; |
| |
| case READ_FORMAT_CAPACITIES: |
| common->data_size_from_cmnd = |
| get_unaligned_be16(&common->cmnd[7]); |
| reply = check_command(common, 10, DATA_DIR_TO_HOST, |
| (3<<7), 1, |
| "READ FORMAT CAPACITIES"); |
| if (reply == 0) |
| reply = do_read_format_capacities(common, bh); |
| break; |
| |
| case REQUEST_SENSE: |
| common->data_size_from_cmnd = common->cmnd[4]; |
| reply = check_command(common, 6, DATA_DIR_TO_HOST, |
| (1<<4), 0, |
| "REQUEST SENSE"); |
| if (reply == 0) |
| reply = do_request_sense(common, bh); |
| break; |
| |
| case START_STOP: |
| common->data_size_from_cmnd = 0; |
| reply = check_command(common, 6, DATA_DIR_NONE, |
| (1<<1) | (1<<4), 0, |
| "START-STOP UNIT"); |
| if (reply == 0) |
| reply = do_start_stop(common); |
| break; |
| |
| case SYNCHRONIZE_CACHE: |
| common->data_size_from_cmnd = 0; |
| reply = check_command(common, 10, DATA_DIR_NONE, |
| (0xf<<2) | (3<<7), 1, |
| "SYNCHRONIZE CACHE"); |
| if (reply == 0) |
| reply = do_synchronize_cache(common); |
| break; |
| |
| case TEST_UNIT_READY: |
| common->data_size_from_cmnd = 0; |
| reply = check_command(common, 6, DATA_DIR_NONE, |
| 0, 1, |
| "TEST UNIT READY"); |
| break; |
| |
| /* |
| * Although optional, this command is used by MS-Windows. We |
| * support a minimal version: BytChk must be 0. |
| */ |
| case VERIFY: |
| common->data_size_from_cmnd = 0; |
| reply = check_command(common, 10, DATA_DIR_NONE, |
| (1<<1) | (0xf<<2) | (3<<7), 1, |
| "VERIFY"); |
| if (reply == 0) |
| reply = do_verify(common); |
| break; |
| |
| case WRITE_6: |
| i = common->cmnd[4]; |
| common->data_size_from_cmnd = (i == 0) ? 256 : i; |
| reply = check_command_size_in_blocks(common, 6, |
| DATA_DIR_FROM_HOST, |
| (7<<1) | (1<<4), 1, |
| "WRITE(6)"); |
| if (reply == 0) |
| reply = do_write(common); |
| break; |
| |
| case WRITE_10: |
| common->data_size_from_cmnd = |
| get_unaligned_be16(&common->cmnd[7]); |
| reply = check_command_size_in_blocks(common, 10, |
| DATA_DIR_FROM_HOST, |
| (1<<1) | (0xf<<2) | (3<<7), 1, |
| "WRITE(10)"); |
| if (reply == 0) |
| reply = do_write(common); |
| break; |
| |
| case WRITE_12: |
| common->data_size_from_cmnd = |
| get_unaligned_be32(&common->cmnd[6]); |
| reply = check_command_size_in_blocks(common, 12, |
| DATA_DIR_FROM_HOST, |
| (1<<1) | (0xf<<2) | (0xf<<6), 1, |
| "WRITE(12)"); |
| if (reply == 0) |
| reply = do_write(common); |
| break; |
| |
| /* |
| * Some mandatory commands that we recognize but don't implement. |
| * They don't mean much in this setting. It's left as an exercise |
| * for anyone interested to implement RESERVE and RELEASE in terms |
| * of Posix locks. |
| */ |
| case FORMAT_UNIT: |
| case RELEASE: |
| case RESERVE: |
| case SEND_DIAGNOSTIC: |
| /* Fall through */ |
| |
| default: |
| unknown_cmnd: |
| common->data_size_from_cmnd = 0; |
| sprintf(unknown, "Unknown x%02x", common->cmnd[0]); |
| reply = check_command(common, common->cmnd_size, |
| DATA_DIR_UNKNOWN, ~0, 0, unknown); |
| if (reply == 0) { |
| common->curlun->sense_data = SS_INVALID_COMMAND; |
| reply = -EINVAL; |
| } |
| break; |
| } |
| up_read(&common->filesem); |
| |
| if (reply == -EINTR || signal_pending(current)) |
| return -EINTR; |
| |
| /* Set up the single reply buffer for finish_reply() */ |
| if (reply == -EINVAL) |
| reply = 0; /* Error reply length */ |
| if (reply >= 0 && common->data_dir == DATA_DIR_TO_HOST) { |
| reply = min((u32)reply, common->data_size_from_cmnd); |
| bh->inreq->length = reply; |
| bh->state = BUF_STATE_FULL; |
| common->residue -= reply; |
| } /* Otherwise it's already set */ |
| |
| return 0; |
| } |
| |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh) |
| { |
| struct usb_request *req = bh->outreq; |
| struct bulk_cb_wrap *cbw = req->buf; |
| struct fsg_common *common = fsg->common; |
| |
| /* Was this a real packet? Should it be ignored? */ |
| if (req->status || test_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags)) |
| return -EINVAL; |
| |
| /* Is the CBW valid? */ |
| if (req->actual != US_BULK_CB_WRAP_LEN || |
| cbw->Signature != cpu_to_le32( |
| US_BULK_CB_SIGN)) { |
| DBG(fsg, "invalid CBW: len %u sig 0x%x\n", |
| req->actual, |
| le32_to_cpu(cbw->Signature)); |
| |
| /* |
| * The Bulk-only spec says we MUST stall the IN endpoint |
| * (6.6.1), so it's unavoidable. It also says we must |
| * retain this state until the next reset, but there's |
| * no way to tell the controller driver it should ignore |
| * Clear-Feature(HALT) requests. |
| * |
| * We aren't required to halt the OUT endpoint; instead |
| * we can simply accept and discard any data received |
| * until the next reset. |
| */ |
| wedge_bulk_in_endpoint(fsg); |
| set_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags); |
| return -EINVAL; |
| } |
| |
| /* Is the CBW meaningful? */ |
| if (cbw->Lun >= ARRAY_SIZE(common->luns) || |
| cbw->Flags & ~US_BULK_FLAG_IN || cbw->Length <= 0 || |
| cbw->Length > MAX_COMMAND_SIZE) { |
| DBG(fsg, "non-meaningful CBW: lun = %u, flags = 0x%x, " |
| "cmdlen %u\n", |
| cbw->Lun, cbw->Flags, cbw->Length); |
| |
| /* |
| * We can do anything we want here, so let's stall the |
| * bulk pipes if we are allowed to. |
| */ |
| if (common->can_stall) { |
| fsg_set_halt(fsg, fsg->bulk_out); |
| halt_bulk_in_endpoint(fsg); |
| } |
| return -EINVAL; |
| } |
| |
| /* Save the command for later */ |
| common->cmnd_size = cbw->Length; |
| memcpy(common->cmnd, cbw->CDB, common->cmnd_size); |
| if (cbw->Flags & US_BULK_FLAG_IN) |
| common->data_dir = DATA_DIR_TO_HOST; |
| else |
| common->data_dir = DATA_DIR_FROM_HOST; |
| common->data_size = le32_to_cpu(cbw->DataTransferLength); |
| if (common->data_size == 0) |
| common->data_dir = DATA_DIR_NONE; |
| common->lun = cbw->Lun; |
| if (common->lun < ARRAY_SIZE(common->luns)) |
| common->curlun = common->luns[common->lun]; |
| else |
| common->curlun = NULL; |
| common->tag = cbw->Tag; |
| return 0; |
| } |
| |
| static int get_next_command(struct fsg_common *common) |
| { |
| struct fsg_buffhd *bh; |
| int rc = 0; |
| |
| /* Wait for the next buffer to become available */ |
| bh = common->next_buffhd_to_fill; |
| rc = sleep_thread(common, true, bh); |
| if (rc) |
| return rc; |
| |
| /* Queue a request to read a Bulk-only CBW */ |
| set_bulk_out_req_length(common, bh, US_BULK_CB_WRAP_LEN); |
| if (!start_out_transfer(common, bh)) |
| /* Don't know what to do if common->fsg is NULL */ |
| return -EIO; |
| |
| /* |
| * We will drain the buffer in software, which means we |
| * can reuse it for the next filling. No need to advance |
| * next_buffhd_to_fill. |
| */ |
| |
| /* Wait for the CBW to arrive */ |
| rc = sleep_thread(common, true, bh); |
| if (rc) |
| return rc; |
| |
| rc = fsg_is_set(common) ? received_cbw(common->fsg, bh) : -EIO; |
| bh->state = BUF_STATE_EMPTY; |
| |
| return rc; |
| } |
| |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static int alloc_request(struct fsg_common *common, struct usb_ep *ep, |
| struct usb_request **preq) |
| { |
| *preq = usb_ep_alloc_request(ep, GFP_ATOMIC); |
| if (*preq) |
| return 0; |
| ERROR(common, "can't allocate request for %s\n", ep->name); |
| return -ENOMEM; |
| } |
| |
| /* Reset interface setting and re-init endpoint state (toggle etc). */ |
| static int do_set_interface(struct fsg_common *common, struct fsg_dev *new_fsg) |
| { |
| struct fsg_dev *fsg; |
| int i, rc = 0; |
| |
| if (common->running) |
| DBG(common, "reset interface\n"); |
| |
| reset: |
| /* Deallocate the requests */ |
| if (common->fsg) { |
| fsg = common->fsg; |
| |
| for (i = 0; i < common->fsg_num_buffers; ++i) { |
| struct fsg_buffhd *bh = &common->buffhds[i]; |
| |
| if (bh->inreq) { |
| usb_ep_free_request(fsg->bulk_in, bh->inreq); |
| bh->inreq = NULL; |
| } |
| if (bh->outreq) { |
| usb_ep_free_request(fsg->bulk_out, bh->outreq); |
| bh->outreq = NULL; |
| } |
| } |
| |
| /* Disable the endpoints */ |
| if (fsg->bulk_in_enabled) { |
| usb_ep_disable(fsg->bulk_in); |
| fsg->bulk_in_enabled = 0; |
| } |
| if (fsg->bulk_out_enabled) { |
| usb_ep_disable(fsg->bulk_out); |
| fsg->bulk_out_enabled = 0; |
| } |
| |
| common->fsg = NULL; |
| wake_up(&common->fsg_wait); |
| } |
| |
| common->running = 0; |
| if (!new_fsg || rc) |
| return rc; |
| |
| common->fsg = new_fsg; |
| fsg = common->fsg; |
| |
| /* Enable the endpoints */ |
| rc = config_ep_by_speed(common->gadget, &(fsg->function), fsg->bulk_in); |
| if (rc) |
| goto reset; |
| rc = usb_ep_enable(fsg->bulk_in); |
| if (rc) |
| goto reset; |
| fsg->bulk_in->driver_data = common; |
| fsg->bulk_in_enabled = 1; |
| |
| rc = config_ep_by_speed(common->gadget, &(fsg->function), |
| fsg->bulk_out); |
| if (rc) |
| goto reset; |
| rc = usb_ep_enable(fsg->bulk_out); |
| if (rc) |
| goto reset; |
| fsg->bulk_out->driver_data = common; |
| fsg->bulk_out_enabled = 1; |
| common->bulk_out_maxpacket = usb_endpoint_maxp(fsg->bulk_out->desc); |
| clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags); |
| |
| /* Allocate the requests */ |
| for (i = 0; i < common->fsg_num_buffers; ++i) { |
| struct fsg_buffhd *bh = &common->buffhds[i]; |
| |
| rc = alloc_request(common, fsg->bulk_in, &bh->inreq); |
| if (rc) |
| goto reset; |
| rc = alloc_request(common, fsg->bulk_out, &bh->outreq); |
| if (rc) |
| goto reset; |
| bh->inreq->buf = bh->outreq->buf = bh->buf; |
| bh->inreq->context = bh->outreq->context = bh; |
| bh->inreq->complete = bulk_in_complete; |
| bh->outreq->complete = bulk_out_complete; |
| } |
| |
| common->running = 1; |
| for (i = 0; i < ARRAY_SIZE(common->luns); ++i) |
| if (common->luns[i]) |
| common->luns[i]->unit_attention_data = |
| SS_RESET_OCCURRED; |
| return rc; |
| } |
| |
| |
| /****************************** ALT CONFIGS ******************************/ |
| |
| static int fsg_set_alt(struct usb_function *f, unsigned intf, unsigned alt) |
| { |
| struct fsg_dev *fsg = fsg_from_func(f); |
| fsg->common->new_fsg = fsg; |
| raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE); |
| return USB_GADGET_DELAYED_STATUS; |
| } |
| |
| static void fsg_disable(struct usb_function *f) |
| { |
| struct fsg_dev *fsg = fsg_from_func(f); |
| fsg->common->new_fsg = NULL; |
| raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE); |
| } |
| |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static void handle_exception(struct fsg_common *common) |
| { |
| int i; |
| struct fsg_buffhd *bh; |
| enum fsg_state old_state; |
| struct fsg_lun *curlun; |
| unsigned int exception_req_tag; |
| |
| /* |
| * Clear the existing signals. Anything but SIGUSR1 is converted |
| * into a high-priority EXIT exception. |
| */ |
| for (;;) { |
| int sig = kernel_dequeue_signal(NULL); |
| if (!sig) |
| break; |
| if (sig != SIGUSR1) { |
| spin_lock_irq(&common->lock); |
| if (common->state < FSG_STATE_EXIT) |
| DBG(common, "Main thread exiting on signal\n"); |
| common->state = FSG_STATE_EXIT; |
| spin_unlock_irq(&common->lock); |
| } |
| } |
| |
| /* Cancel all the pending transfers */ |
| if (likely(common->fsg)) { |
| for (i = 0; i < common->fsg_num_buffers; ++i) { |
| bh = &common->buffhds[i]; |
| if (bh->state == BUF_STATE_SENDING) |
| usb_ep_dequeue(common->fsg->bulk_in, bh->inreq); |
| if (bh->state == BUF_STATE_RECEIVING) |
| usb_ep_dequeue(common->fsg->bulk_out, |
| bh->outreq); |
| |
| /* Wait for a transfer to become idle */ |
| if (sleep_thread(common, false, bh)) |
| return; |
| } |
| |
| /* Clear out the controller's fifos */ |
| if (common->fsg->bulk_in_enabled) |
| usb_ep_fifo_flush(common->fsg->bulk_in); |
| if (common->fsg->bulk_out_enabled) |
| usb_ep_fifo_flush(common->fsg->bulk_out); |
| } |
| |
| /* |
| * Reset the I/O buffer states and pointers, the SCSI |
| * state, and the exception. Then invoke the handler. |
| */ |
| spin_lock_irq(&common->lock); |
| |
| for (i = 0; i < common->fsg_num_buffers; ++i) { |
| bh = &common->buffhds[i]; |
| bh->state = BUF_STATE_EMPTY; |
| } |
| common->next_buffhd_to_fill = &common->buffhds[0]; |
| common->next_buffhd_to_drain = &common->buffhds[0]; |
| exception_req_tag = common->exception_req_tag; |
| old_state = common->state; |
| common->state = FSG_STATE_NORMAL; |
| |
| if (old_state != FSG_STATE_ABORT_BULK_OUT) { |
| for (i = 0; i < ARRAY_SIZE(common->luns); ++i) { |
| curlun = common->luns[i]; |
| if (!curlun) |
| continue; |
| curlun->prevent_medium_removal = 0; |
| curlun->sense_data = SS_NO_SENSE; |
| curlun->unit_attention_data = SS_NO_SENSE; |
| curlun->sense_data_info = 0; |
| curlun->info_valid = 0; |
| } |
| } |
| spin_unlock_irq(&common->lock); |
| |
| /* Carry out any extra actions required for the exception */ |
| switch (old_state) { |
| case FSG_STATE_NORMAL: |
| break; |
| |
| case FSG_STATE_ABORT_BULK_OUT: |
| send_status(common); |
| break; |
| |
| case FSG_STATE_PROTOCOL_RESET: |
| /* |
| * In case we were forced against our will to halt a |
| * bulk endpoint, clear the halt now. (The SuperH UDC |
| * requires this.) |
| */ |
| if (!fsg_is_set(common)) |
| break; |
| if (test_and_clear_bit(IGNORE_BULK_OUT, |
| &common->fsg->atomic_bitflags)) |
| usb_ep_clear_halt(common->fsg->bulk_in); |
| |
| if (common->ep0_req_tag == exception_req_tag) |
| ep0_queue(common); /* Complete the status stage */ |
| |
| /* |
| * Technically this should go here, but it would only be |
| * a waste of time. Ditto for the INTERFACE_CHANGE and |
| * CONFIG_CHANGE cases. |
| */ |
| /* for (i = 0; i < common->ARRAY_SIZE(common->luns); ++i) */ |
| /* if (common->luns[i]) */ |
| /* common->luns[i]->unit_attention_data = */ |
| /* SS_RESET_OCCURRED; */ |
| break; |
| |
| case FSG_STATE_CONFIG_CHANGE: |
| do_set_interface(common, common->new_fsg); |
| if (common->new_fsg) |
| usb_composite_setup_continue(common->cdev); |
| break; |
| |
| case FSG_STATE_EXIT: |
| do_set_interface(common, NULL); /* Free resources */ |
| spin_lock_irq(&common->lock); |
| common->state = FSG_STATE_TERMINATED; /* Stop the thread */ |
| spin_unlock_irq(&common->lock); |
| break; |
| |
| case FSG_STATE_TERMINATED: |
| break; |
| } |
| } |
| |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static int fsg_main_thread(void *common_) |
| { |
| struct fsg_common *common = common_; |
| |
| /* |
| * Allow the thread to be killed by a signal, but set the signal mask |
| * to block everything but INT, TERM, KILL, and USR1. |
| */ |
| allow_signal(SIGINT); |
| allow_signal(SIGTERM); |
| allow_signal(SIGKILL); |
| allow_signal(SIGUSR1); |
| |
| /* Allow the thread to be frozen */ |
| set_freezable(); |
| |
| /* |
| * Arrange for userspace references to be interpreted as kernel |
| * pointers. That way we can pass a kernel pointer to a routine |
| * that expects a __user pointer and it will work okay. |
| */ |
| set_fs(get_ds()); |
| |
| /* The main loop */ |
| while (common->state != FSG_STATE_TERMINATED) { |
| if (exception_in_progress(common) || signal_pending(current)) { |
| handle_exception(common); |
| continue; |
| } |
| |
| if (!common->running) { |
| sleep_thread(common, true, NULL); |
| continue; |
| } |
| |
| if (get_next_command(common) || exception_in_progress(common)) |
| continue; |
| if (do_scsi_command(common) || exception_in_progress(common)) |
| continue; |
| if (finish_reply(common) || exception_in_progress(common)) |
| continue; |
| send_status(common); |
| } |
| |
| spin_lock_irq(&common->lock); |
| common->thread_task = NULL; |
| spin_unlock_irq(&common->lock); |
| |
| if (!common->ops || !common->ops->thread_exits |
| || common->ops->thread_exits(common) < 0) { |
| int i; |
| |
| down_write(&common->filesem); |
| for (i = 0; i < ARRAY_SIZE(common->luns); --i) { |
| struct fsg_lun *curlun = common->luns[i]; |
| if (!curlun || !fsg_lun_is_open(curlun)) |
| continue; |
| |
| fsg_lun_close(curlun); |
| curlun->unit_attention_data = SS_MEDIUM_NOT_PRESENT; |
| } |
| up_write(&common->filesem); |
| } |
| |
| /* Let fsg_unbind() know the thread has exited */ |
| complete_and_exit(&common->thread_notifier, 0); |
| } |
| |
| |
| /*************************** DEVICE ATTRIBUTES ***************************/ |
| |
| static ssize_t ro_show(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct fsg_lun *curlun = fsg_lun_from_dev(dev); |
| |
| return fsg_show_ro(curlun, buf); |
| } |
| |
| static ssize_t nofua_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct fsg_lun *curlun = fsg_lun_from_dev(dev); |
| |
| return fsg_show_nofua(curlun, buf); |
| } |
| |
| static ssize_t file_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct fsg_lun *curlun = fsg_lun_from_dev(dev); |
| struct rw_semaphore *filesem = dev_get_drvdata(dev); |
| |
| return fsg_show_file(curlun, filesem, buf); |
| } |
| |
| static ssize_t ro_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct fsg_lun *curlun = fsg_lun_from_dev(dev); |
| struct rw_semaphore *filesem = dev_get_drvdata(dev); |
| |
| return fsg_store_ro(curlun, filesem, buf, count); |
| } |
| |
| static ssize_t nofua_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct fsg_lun *curlun = fsg_lun_from_dev(dev); |
| |
| return fsg_store_nofua(curlun, buf, count); |
| } |
| |
| static ssize_t file_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct fsg_lun *curlun = fsg_lun_from_dev(dev); |
| struct rw_semaphore *filesem = dev_get_drvdata(dev); |
| |
| return fsg_store_file(curlun, filesem, buf, count); |
| } |
| |
| static DEVICE_ATTR_RW(nofua); |
| /* mode wil be set in fsg_lun_attr_is_visible() */ |
| static DEVICE_ATTR(ro, 0, ro_show, ro_store); |
| static DEVICE_ATTR(file, 0, file_show, file_store); |
| |
| /****************************** FSG COMMON ******************************/ |
| |
| static void fsg_common_release(struct kref *ref); |
| |
| static void fsg_lun_release(struct device *dev) |
| { |
| /* Nothing needs to be done */ |
| } |
| |
| void fsg_common_get(struct fsg_common *common) |
| { |
| kref_get(&common->ref); |
| } |
| EXPORT_SYMBOL_GPL(fsg_common_get); |
| |
| void fsg_common_put(struct fsg_common *common) |
| { |
| kref_put(&common->ref, fsg_common_release); |
| } |
| EXPORT_SYMBOL_GPL(fsg_common_put); |
| |
| static struct fsg_common *fsg_common_setup(struct fsg_common *common) |
| { |
| if (!common) { |
| common = kzalloc(sizeof(*common), GFP_KERNEL); |
| if (!common) |
| return ERR_PTR(-ENOMEM); |
| common->free_storage_on_release = 1; |
| } else { |
| common->free_storage_on_release = 0; |
| } |
| init_rwsem(&common->filesem); |
| spin_lock_init(&common->lock); |
| kref_init(&common->ref); |
| init_completion(&common->thread_notifier); |
| init_waitqueue_head(&common->io_wait); |
| init_waitqueue_head(&common->fsg_wait); |
| common->state = FSG_STATE_TERMINATED; |
| memset(common->luns, 0, sizeof(common->luns)); |
| |
| return common; |
| } |
| |
| void fsg_common_set_sysfs(struct fsg_common *common, bool sysfs) |
| { |
| common->sysfs = sysfs; |
| } |
| EXPORT_SYMBOL_GPL(fsg_common_set_sysfs); |
| |
| static void _fsg_common_free_buffers(struct fsg_buffhd *buffhds, unsigned n) |
| { |
| if (buffhds) { |
| struct fsg_buffhd *bh = buffhds; |
| while (n--) { |
| kfree(bh->buf); |
| ++bh; |
| } |
| kfree(buffhds); |
| } |
| } |
| |
| int fsg_common_set_num_buffers(struct fsg_common *common, unsigned int n) |
| { |
| struct fsg_buffhd *bh, *buffhds; |
| int i; |
| |
| buffhds = kcalloc(n, sizeof(*buffhds), GFP_KERNEL); |
| if (!buffhds) |
| return -ENOMEM; |
| |
| /* Data buffers cyclic list */ |
| bh = buffhds; |
| i = n; |
| goto buffhds_first_it; |
| do { |
| bh->next = bh + 1; |
| ++bh; |
| buffhds_first_it: |
| bh->buf = kmalloc(FSG_BUFLEN, GFP_KERNEL); |
| if (unlikely(!bh->buf)) |
| goto error_release; |
| } while (--i); |
| bh->next = buffhds; |
| |
| _fsg_common_free_buffers(common->buffhds, common->fsg_num_buffers); |
| common->fsg_num_buffers = n; |
| common->buffhds = buffhds; |
| |
| return 0; |
| |
| error_release: |
| /* |
| * "buf"s pointed to by heads after n - i are NULL |
| * so releasing them won't hurt |
| */ |
| _fsg_common_free_buffers(buffhds, n); |
| |
| return -ENOMEM; |
| } |
| EXPORT_SYMBOL_GPL(fsg_common_set_num_buffers); |
| |
| void fsg_common_remove_lun(struct fsg_lun *lun) |
| { |
| if (device_is_registered(&lun->dev)) |
| device_unregister(&lun->dev); |
| fsg_lun_close(lun); |
| kfree(lun); |
| } |
| EXPORT_SYMBOL_GPL(fsg_common_remove_lun); |
| |
| static void _fsg_common_remove_luns(struct fsg_common *common, int n) |
| { |
| int i; |
| |
| for (i = 0; i < n; ++i) |
| if (common->luns[i]) { |
| fsg_common_remove_lun(common->luns[i]); |
| common->luns[i] = NULL; |
| } |
| } |
| |
| void fsg_common_remove_luns(struct fsg_common *common) |
| { |
| _fsg_common_remove_luns(common, ARRAY_SIZE(common->luns)); |
| } |
| EXPORT_SYMBOL_GPL(fsg_common_remove_luns); |
| |
| void fsg_common_set_ops(struct fsg_common *common, |
| const struct fsg_operations *ops) |
| { |
| common->ops = ops; |
| } |
| EXPORT_SYMBOL_GPL(fsg_common_set_ops); |
| |
| void fsg_common_free_buffers(struct fsg_common *common) |
| { |
| _fsg_common_free_buffers(common->buffhds, common->fsg_num_buffers); |
| common->buffhds = NULL; |
| } |
| EXPORT_SYMBOL_GPL(fsg_common_free_buffers); |
| |
| int fsg_common_set_cdev(struct fsg_common *common, |
| struct usb_composite_dev *cdev, bool can_stall) |
| { |
| struct usb_string *us; |
| |
| common->gadget = cdev->gadget; |
| common->ep0 = cdev->gadget->ep0; |
| common->ep0req = cdev->req; |
| common->cdev = cdev; |
| |
| us = usb_gstrings_attach(cdev, fsg_strings_array, |
| ARRAY_SIZE(fsg_strings)); |
| if (IS_ERR(us)) |
| return PTR_ERR(us); |
| |
| fsg_intf_desc.iInterface = us[FSG_STRING_INTERFACE].id; |
| |
| /* |
| * Some peripheral controllers are known not to be able to |
| * halt bulk endpoints correctly. If one of them is present, |
| * disable stalls. |
| */ |
| common->can_stall = can_stall && |
| gadget_is_stall_supported(common->gadget); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(fsg_common_set_cdev); |
| |
| static struct attribute *fsg_lun_dev_attrs[] = { |
| &dev_attr_ro.attr, |
| &dev_attr_file.attr, |
| &dev_attr_nofua.attr, |
| NULL |
| }; |
| |
| static umode_t fsg_lun_dev_is_visible(struct kobject *kobj, |
| struct attribute *attr, int idx) |
| { |
| struct device *dev = kobj_to_dev(kobj); |
| struct fsg_lun *lun = fsg_lun_from_dev(dev); |
| |
| if (attr == &dev_attr_ro.attr) |
| return lun->cdrom ? S_IRUGO : (S_IWUSR | S_IRUGO); |
| if (attr == &dev_attr_file.attr) |
| return lun->removable ? (S_IWUSR | S_IRUGO) : S_IRUGO; |
| return attr->mode; |
| } |
| |
| static const struct attribute_group fsg_lun_dev_group = { |
| .attrs = fsg_lun_dev_attrs, |
| .is_visible = fsg_lun_dev_is_visible, |
| }; |
| |
| static const struct attribute_group *fsg_lun_dev_groups[] = { |
| &fsg_lun_dev_group, |
| NULL |
| }; |
| |
| int fsg_common_create_lun(struct fsg_common *common, struct fsg_lun_config *cfg, |
| unsigned int id, const char *name, |
| const char **name_pfx) |
| { |
| struct fsg_lun *lun; |
| char *pathbuf, *p; |
| int rc = -ENOMEM; |
| |
| if (id >= ARRAY_SIZE(common->luns)) |
| return -ENODEV; |
| |
| if (common->luns[id]) |
| return -EBUSY; |
| |
| if (!cfg->filename && !cfg->removable) { |
| pr_err("no file given for LUN%d\n", id); |
| return -EINVAL; |
| } |
| |
| lun = kzalloc(sizeof(*lun), GFP_KERNEL); |
| if (!lun) |
| return -ENOMEM; |
| |
| lun->name_pfx = name_pfx; |
| |
| lun->cdrom = !!cfg->cdrom; |
| lun->ro = cfg->cdrom || cfg->ro; |
| lun->initially_ro = lun->ro; |
| lun->removable = !!cfg->removable; |
| |
| if (!common->sysfs) { |
| /* we DON'T own the name!*/ |
| lun->name = name; |
| } else { |
| lun->dev.release = fsg_lun_release; |
| lun->dev.parent = &common->gadget->dev; |
| lun->dev.groups = fsg_lun_dev_groups; |
| dev_set_drvdata(&lun->dev, &common->filesem); |
| dev_set_name(&lun->dev, "%s", name); |
| lun->name = dev_name(&lun->dev); |
| |
| rc = device_register(&lun->dev); |
| if (rc) { |
| pr_info("failed to register LUN%d: %d\n", id, rc); |
| put_device(&lun->dev); |
| goto error_sysfs; |
| } |
| } |
| |
| common->luns[id] = lun; |
| |
| if (cfg->filename) { |
| rc = fsg_lun_open(lun, cfg->filename); |
| if (rc) |
| goto error_lun; |
| } |
| |
| pathbuf = kmalloc(PATH_MAX, GFP_KERNEL); |
| p = "(no medium)"; |
| if (fsg_lun_is_open(lun)) { |
| p = "(error)"; |
| if (pathbuf) { |
| p = file_path(lun->filp, pathbuf, PATH_MAX); |
| if (IS_ERR(p)) |
| p = "(error)"; |
| } |
| } |
| pr_info("LUN: %s%s%sfile: %s\n", |
| lun->removable ? "removable " : "", |
| lun->ro ? "read only " : "", |
| lun->cdrom ? "CD-ROM " : "", |
| p); |
| kfree(pathbuf); |
| |
| return 0; |
| |
| error_lun: |
| if (device_is_registered(&lun->dev)) |
| device_unregister(&lun->dev); |
| fsg_lun_close(lun); |
| common->luns[id] = NULL; |
| error_sysfs: |
| kfree(lun); |
| return rc; |
| } |
| EXPORT_SYMBOL_GPL(fsg_common_create_lun); |
| |
| int fsg_common_create_luns(struct fsg_common *common, struct fsg_config *cfg) |
| { |
| char buf[8]; /* enough for 100000000 different numbers, decimal */ |
| int i, rc; |
| |
| fsg_common_remove_luns(common); |
| |
| for (i = 0; i < cfg->nluns; ++i) { |
| snprintf(buf, sizeof(buf), "lun%d", i); |
| rc = fsg_common_create_lun(common, &cfg->luns[i], i, buf, NULL); |
| if (rc) |
| goto fail; |
| } |
| |
| pr_info("Number of LUNs=%d\n", cfg->nluns); |
| |
| return 0; |
| |
| fail: |
| _fsg_common_remove_luns(common, i); |
| return rc; |
| } |
| EXPORT_SYMBOL_GPL(fsg_common_create_luns); |
| |
| void fsg_common_set_inquiry_string(struct fsg_common *common, const char *vn, |
| const char *pn) |
| { |
| int i; |
| |
| /* Prepare inquiryString */ |
| i = get_default_bcdDevice(); |
| snprintf(common->inquiry_string, sizeof(common->inquiry_string), |
| "%-8s%-16s%04x", vn ?: "Linux", |
| /* Assume product name dependent on the first LUN */ |
| pn ?: ((*common->luns)->cdrom |
| ? "File-CD Gadget" |
| : "File-Stor Gadget"), |
| i); |
| } |
| EXPORT_SYMBOL_GPL(fsg_common_set_inquiry_string); |
| |
| static void fsg_common_release(struct kref *ref) |
| { |
| struct fsg_common *common = container_of(ref, struct fsg_common, ref); |
| int i; |
| |
| /* If the thread isn't already dead, tell it to exit now */ |
| if (common->state != FSG_STATE_TERMINATED) { |
| raise_exception(common, FSG_STATE_EXIT); |
| wait_for_completion(&common->thread_notifier); |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(common->luns); ++i) { |
| struct fsg_lun *lun = common->luns[i]; |
| if (!lun) |
| continue; |
| fsg_lun_close(lun); |
| if (device_is_registered(&lun->dev)) |
| device_unregister(&lun->dev); |
| kfree(lun); |
| } |
| |
| _fsg_common_free_buffers(common->buffhds, common->fsg_num_buffers); |
| if (common->free_storage_on_release) |
| kfree(common); |
| } |
| |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static int fsg_bind(struct usb_configuration *c, struct usb_function *f) |
| { |
| struct fsg_dev *fsg = fsg_from_func(f); |
| struct fsg_common *common = fsg->common; |
| struct usb_gadget *gadget = c->cdev->gadget; |
| int i; |
| struct usb_ep *ep; |
| unsigned max_burst; |
| int ret; |
| struct fsg_opts *opts; |
| |
| /* Don't allow to bind if we don't have at least one LUN */ |
| ret = _fsg_common_get_max_lun(common); |
| if (ret < 0) { |
| pr_err("There should be at least one LUN.\n"); |
| return -EINVAL; |
| } |
| |
| opts = fsg_opts_from_func_inst(f->fi); |
| if (!opts->no_configfs) { |
| ret = fsg_common_set_cdev(fsg->common, c->cdev, |
| fsg->common->can_stall); |
| if (ret) |
| return ret; |
| fsg_common_set_inquiry_string(fsg->common, NULL, NULL); |
| } |
| |
| if (!common->thread_task) { |
| common->state = FSG_STATE_NORMAL; |
| common->thread_task = |
| kthread_create(fsg_main_thread, common, "file-storage"); |
| if (IS_ERR(common->thread_task)) { |
| ret = PTR_ERR(common->thread_task); |
| common->thread_task = NULL; |
| common->state = FSG_STATE_TERMINATED; |
| return ret; |
| } |
| DBG(common, "I/O thread pid: %d\n", |
| task_pid_nr(common->thread_task)); |
| wake_up_process(common->thread_task); |
| } |
| |
| fsg->gadget = gadget; |
| |
| /* New interface */ |
| i = usb_interface_id(c, f); |
| if (i < 0) |
| goto fail; |
| fsg_intf_desc.bInterfaceNumber = i; |
| fsg->interface_number = i; |
| |
| /* Find all the endpoints we will use */ |
| ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_in_desc); |
| if (!ep) |
| goto autoconf_fail; |
| fsg->bulk_in = ep; |
| |
| ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_out_desc); |
| if (!ep) |
| goto autoconf_fail; |
| fsg->bulk_out = ep; |
| |
| /* Assume endpoint addresses are the same for both speeds */ |
| fsg_hs_bulk_in_desc.bEndpointAddress = |
| fsg_fs_bulk_in_desc.bEndpointAddress; |
| fsg_hs_bulk_out_desc.bEndpointAddress = |
| fsg_fs_bulk_out_desc.bEndpointAddress; |
| |
| /* Calculate bMaxBurst, we know packet size is 1024 */ |
| max_burst = min_t(unsigned, FSG_BUFLEN / 1024, 15); |
| |
| fsg_ss_bulk_in_desc.bEndpointAddress = |
| fsg_fs_bulk_in_desc.bEndpointAddress; |
| fsg_ss_bulk_in_comp_desc.bMaxBurst = max_burst; |
| |
| fsg_ss_bulk_out_desc.bEndpointAddress = |
| fsg_fs_bulk_out_desc.bEndpointAddress; |
| fsg_ss_bulk_out_comp_desc.bMaxBurst = max_burst; |
| |
| ret = usb_assign_descriptors(f, fsg_fs_function, fsg_hs_function, |
| fsg_ss_function, fsg_ss_function); |
| if (ret) |
| goto autoconf_fail; |
| |
| return 0; |
| |
| autoconf_fail: |
| ERROR(fsg, "unable to autoconfigure all endpoints\n"); |
| i = -ENOTSUPP; |
| fail: |
| /* terminate the thread */ |
| if (fsg->common->state != FSG_STATE_TERMINATED) { |
| raise_exception(fsg->common, FSG_STATE_EXIT); |
| wait_for_completion(&fsg->common->thread_notifier); |
| } |
| return i; |
| } |
| |
| /****************************** ALLOCATE FUNCTION *************************/ |
| |
| static void fsg_unbind(struct usb_configuration *c, struct usb_function *f) |
| { |
| struct fsg_dev *fsg = fsg_from_func(f); |
| struct fsg_common *common = fsg->common; |
| |
| DBG(fsg, "unbind\n"); |
| if (fsg->common->fsg == fsg) { |
| fsg->common->new_fsg = NULL; |
| raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE); |
| /* FIXME: make interruptible or killable somehow? */ |
| wait_event(common->fsg_wait, common->fsg != fsg); |
| } |
| |
| usb_free_all_descriptors(&fsg->function); |
| } |
| |
| static inline struct fsg_lun_opts *to_fsg_lun_opts(struct config_item *item) |
| { |
| return container_of(to_config_group(item), struct fsg_lun_opts, group); |
| } |
| |
| static inline struct fsg_opts *to_fsg_opts(struct config_item *item) |
| { |
| return container_of(to_config_group(item), struct fsg_opts, |
| func_inst.group); |
| } |
| |
| static void fsg_lun_attr_release(struct config_item *item) |
| { |
| struct fsg_lun_opts *lun_opts; |
| |
| lun_opts = to_fsg_lun_opts(item); |
| kfree(lun_opts); |
| } |
| |
| static struct configfs_item_operations fsg_lun_item_ops = { |
| .release = fsg_lun_attr_release, |
| }; |
| |
| static ssize_t fsg_lun_opts_file_show(struct config_item *item, char *page) |
| { |
| struct fsg_lun_opts *opts = to_fsg_lun_opts(item); |
| struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent); |
| |
| return fsg_show_file(opts->lun, &fsg_opts->common->filesem, page); |
| } |
| |
| static ssize_t fsg_lun_opts_file_store(struct config_item *item, |
| const char *page, size_t len) |
| { |
| struct fsg_lun_opts *opts = to_fsg_lun_opts(item); |
| struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent); |
| |
| return fsg_store_file(opts->lun, &fsg_opts->common->filesem, page, len); |
| } |
| |
| CONFIGFS_ATTR(fsg_lun_opts_, file); |
| |
| static ssize_t fsg_lun_opts_ro_show(struct config_item *item, char *page) |
| { |
| return fsg_show_ro(to_fsg_lun_opts(item)->lun, page); |
| } |
| |
| static ssize_t fsg_lun_opts_ro_store(struct config_item *item, |
| const char *page, size_t len) |
| { |
| struct fsg_lun_opts *opts = to_fsg_lun_opts(item); |
| struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent); |
| |
| return fsg_store_ro(opts->lun, &fsg_opts->common->filesem, page, len); |
| } |
| |
| CONFIGFS_ATTR(fsg_lun_opts_, ro); |
| |
| static ssize_t fsg_lun_opts_removable_show(struct config_item *item, |
| char *page) |
| { |
| return fsg_show_removable(to_fsg_lun_opts(item)->lun, page); |
| } |
| |
| static ssize_t fsg_lun_opts_removable_store(struct config_item *item, |
| const char *page, size_t len) |
| { |
| return fsg_store_removable(to_fsg_lun_opts(item)->lun, page, len); |
| } |
| |
| CONFIGFS_ATTR(fsg_lun_opts_, removable); |
| |
| static ssize_t fsg_lun_opts_cdrom_show(struct config_item *item, char *page) |
| { |
| return fsg_show_cdrom(to_fsg_lun_opts(item)->lun, page); |
| } |
| |
| static ssize_t fsg_lun_opts_cdrom_store(struct config_item *item, |
| const char *page, size_t len) |
| { |
| struct fsg_lun_opts *opts = to_fsg_lun_opts(item); |
| struct fsg_opts *fsg_opts = to_fsg_opts(opts->group.cg_item.ci_parent); |
| |
| return fsg_store_cdrom(opts->lun, &fsg_opts->common->filesem, page, |
| len); |
| } |
| |
| CONFIGFS_ATTR(fsg_lun_opts_, cdrom); |
| |
| static ssize_t fsg_lun_opts_nofua_show(struct config_item *item, char *page) |
| { |
| return fsg_show_nofua(to_fsg_lun_opts(item)->lun, page); |
| } |
| |
| static ssize_t fsg_lun_opts_nofua_store(struct config_item *item, |
| const char *page, size_t len) |
| { |
| return fsg_store_nofua(to_fsg_lun_opts(item)->lun, page, len); |
| } |
| |
| CONFIGFS_ATTR(fsg_lun_opts_, nofua); |
| |
| static ssize_t fsg_lun_opts_inquiry_string_show(struct config_item *item, |
| char *page) |
| { |
| return fsg_show_inquiry_string(to_fsg_lun_opts(item)->lun, page); |
| } |
| |
| static ssize_t fsg_lun_opts_inquiry_string_store(struct config_item *item, |
| const char *page, size_t len) |
| { |
| return fsg_store_inquiry_string(to_fsg_lun_opts(item)->lun, page, len); |
| } |
| |
| CONFIGFS_ATTR(fsg_lun_opts_, inquiry_string); |
| |
| static struct configfs_attribute *fsg_lun_attrs[] = { |
| &fsg_lun_opts_attr_file, |
| &fsg_lun_opts_attr_ro, |
| &fsg_lun_opts_attr_removable, |
| &fsg_lun_opts_attr_cdrom, |
| &fsg_lun_opts_attr_nofua, |
| &fsg_lun_opts_attr_inquiry_string, |
| NULL, |
| }; |
| |
| static struct config_item_type fsg_lun_type = { |
| .ct_item_ops = &fsg_lun_item_ops, |
| .ct_attrs = fsg_lun_attrs, |
| .ct_owner = THIS_MODULE, |
| }; |
| |
| static struct config_group *fsg_lun_make(struct config_group *group, |
| const char *name) |
| { |
| struct fsg_lun_opts *opts; |
| struct fsg_opts *fsg_opts; |
| struct fsg_lun_config config; |
| char *num_str; |
| u8 num; |
| int ret; |
| |
| num_str = strchr(name, '.'); |
| if (!num_str) { |
| pr_err("Unable to locate . in LUN.NUMBER\n"); |
| return ERR_PTR(-EINVAL); |
| } |
| num_str++; |
| |
| ret = kstrtou8(num_str, 0, &num); |
| if (ret) |
| return ERR_PTR(ret); |
| |
| fsg_opts = to_fsg_opts(&group->cg_item); |
| if (num >= FSG_MAX_LUNS) |
| return ERR_PTR(-ERANGE); |
| |
| mutex_lock(&fsg_opts->lock); |
| if (fsg_opts->refcnt || fsg_opts->common->luns[num]) { |
| ret = -EBUSY; |
| goto out; |
| } |
| |
| opts = kzalloc(sizeof(*opts), GFP_KERNEL); |
| if (!opts) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| memset(&config, 0, sizeof(config)); |
| config.removable = true; |
| |
| ret = fsg_common_create_lun(fsg_opts->common, &config, num, name, |
| (const char **)&group->cg_item.ci_name); |
| if (ret) { |
| kfree(opts); |
| goto out; |
| } |
| opts->lun = fsg_opts->common->luns[num]; |
| opts->lun_id = num; |
| mutex_unlock(&fsg_opts->lock); |
| |
| config_group_init_type_name(&opts->group, name, &fsg_lun_type); |
| |
| return &opts->group; |
| out: |
| mutex_unlock(&fsg_opts->lock); |
| return ERR_PTR(ret); |
| } |
| |
| static void fsg_lun_drop(struct config_group *group, struct config_item *item) |
| { |
| struct fsg_lun_opts *lun_opts; |
| struct fsg_opts *fsg_opts; |
| |
| lun_opts = to_fsg_lun_opts(item); |
| fsg_opts = to_fsg_opts(&group->cg_item); |
| |
| mutex_lock(&fsg_opts->lock); |
| if (fsg_opts->refcnt) { |
| struct config_item *gadget; |
| |
| gadget = group->cg_item.ci_parent->ci_parent; |
| unregister_gadget_item(gadget); |
| } |
| |
| fsg_common_remove_lun(lun_opts->lun); |
| fsg_opts->common->luns[lun_opts->lun_id] = NULL; |
| lun_opts->lun_id = 0; |
| mutex_unlock(&fsg_opts->lock); |
| |
| config_item_put(item); |
| } |
| |
| static void fsg_attr_release(struct config_item *item) |
| { |
| struct fsg_opts *opts = to_fsg_opts(item); |
| |
| usb_put_function_instance(&opts->func_inst); |
| } |
| |
| static struct configfs_item_operations fsg_item_ops = { |
| .release = fsg_attr_release, |
| }; |
| |
| static ssize_t fsg_opts_stall_show(struct config_item *item, char *page) |
| { |
| struct fsg_opts *opts = to_fsg_opts(item); |
| int result; |
| |
| mutex_lock(&opts->lock); |
| result = sprintf(page, "%d", opts->common->can_stall); |
| mutex_unlock(&opts->lock); |
| |
| return result; |
| } |
| |
| static ssize_t fsg_opts_stall_store(struct config_item *item, const char *page, |
| size_t len) |
| { |
| struct fsg_opts *opts = to_fsg_opts(item); |
| int ret; |
| bool stall; |
| |
| mutex_lock(&opts->lock); |
| |
| if (opts->refcnt) { |
| mutex_unlock(&opts->lock); |
| return -EBUSY; |
| } |
| |
| ret = strtobool(page, &stall); |
| if (!ret) { |
| opts->common->can_stall = stall; |
| ret = len; |
| } |
| |
| mutex_unlock(&opts->lock); |
| |
| return ret; |
| } |
| |
| CONFIGFS_ATTR(fsg_opts_, stall); |
| |
| #ifdef CONFIG_USB_GADGET_DEBUG_FILES |
| static ssize_t fsg_opts_num_buffers_show(struct config_item *item, char *page) |
| { |
| struct fsg_opts *opts = to_fsg_opts(item); |
| int result; |
| |
| mutex_lock(&opts->lock); |
| result = sprintf(page, "%d", opts->common->fsg_num_buffers); |
| mutex_unlock(&opts->lock); |
| |
| return result; |
| } |
| |
| static ssize_t fsg_opts_num_buffers_store(struct config_item *item, |
| const char *page, size_t len) |
| { |
| struct fsg_opts *opts = to_fsg_opts(item); |
| int ret; |
| u8 num; |
| |
| mutex_lock(&opts->lock); |
| if (opts->refcnt) { |
| ret = -EBUSY; |
| goto end; |
| } |
| ret = kstrtou8(page, 0, &num); |
| if (ret) |
| goto end; |
| |
| fsg_common_set_num_buffers(opts->common, num); |
| ret = len; |
| |
| end: |
| mutex_unlock(&opts->lock); |
| return ret; |
| } |
| |
| CONFIGFS_ATTR(fsg_opts_, num_buffers); |
| #endif |
| |
| static struct configfs_attribute *fsg_attrs[] = { |
| &fsg_opts_attr_stall, |
| #ifdef CONFIG_USB_GADGET_DEBUG_FILES |
| &fsg_opts_attr_num_buffers, |
| #endif |
| NULL, |
| }; |
| |
| static struct configfs_group_operations fsg_group_ops = { |
| .make_group = fsg_lun_make, |
| .drop_item = fsg_lun_drop, |
| }; |
| |
| static struct config_item_type fsg_func_type = { |
| .ct_item_ops = &fsg_item_ops, |
| .ct_group_ops = &fsg_group_ops, |
| .ct_attrs = fsg_attrs, |
| .ct_owner = THIS_MODULE, |
| }; |
| |
| static void fsg_free_inst(struct usb_function_instance *fi) |
| { |
| struct fsg_opts *opts; |
| |
| opts = fsg_opts_from_func_inst(fi); |
| fsg_common_put(opts->common); |
| kfree(opts); |
| } |
| |
| static struct usb_function_instance *fsg_alloc_inst(void) |
| { |
| struct fsg_opts *opts; |
| struct fsg_lun_config config; |
| int rc; |
| |
| opts = kzalloc(sizeof(*opts), GFP_KERNEL); |
| if (!opts) |
| return ERR_PTR(-ENOMEM); |
| mutex_init(&opts->lock); |
| opts->func_inst.free_func_inst = fsg_free_inst; |
| opts->common = fsg_common_setup(opts->common); |
| if (IS_ERR(opts->common)) { |
| rc = PTR_ERR(opts->common); |
| goto release_opts; |
| } |
| |
| rc = fsg_common_set_num_buffers(opts->common, |
| CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS); |
| if (rc) |
| goto release_opts; |
| |
| pr_info(FSG_DRIVER_DESC ", version: " FSG_DRIVER_VERSION "\n"); |
| |
| memset(&config, 0, sizeof(config)); |
| config.removable = true; |
| rc = fsg_common_create_lun(opts->common, &config, 0, "lun.0", |
| (const char **)&opts->func_inst.group.cg_item.ci_name); |
| if (rc) |
| goto release_buffers; |
| |
| opts->lun0.lun = opts->common->luns[0]; |
| opts->lun0.lun_id = 0; |
| |
| config_group_init_type_name(&opts->func_inst.group, "", &fsg_func_type); |
| |
| config_group_init_type_name(&opts->lun0.group, "lun.0", &fsg_lun_type); |
| configfs_add_default_group(&opts->lun0.group, &opts->func_inst.group); |
| |
| return &opts->func_inst; |
| |
| release_buffers: |
| fsg_common_free_buffers(opts->common); |
| release_opts: |
| kfree(opts); |
| return ERR_PTR(rc); |
| } |
| |
| static void fsg_free(struct usb_function *f) |
| { |
| struct fsg_dev *fsg; |
| struct fsg_opts *opts; |
| |
| fsg = container_of(f, struct fsg_dev, function); |
| opts = container_of(f->fi, struct fsg_opts, func_inst); |
| |
| mutex_lock(&opts->lock); |
| opts->refcnt--; |
| mutex_unlock(&opts->lock); |
| |
| kfree(fsg); |
| } |
| |
| static struct usb_function *fsg_alloc(struct usb_function_instance *fi) |
| { |
| struct fsg_opts *opts = fsg_opts_from_func_inst(fi); |
| struct fsg_common *common = opts->common; |
| struct fsg_dev *fsg; |
| |
| fsg = kzalloc(sizeof(*fsg), GFP_KERNEL); |
| if (unlikely(!fsg)) |
| return ERR_PTR(-ENOMEM); |
| |
| mutex_lock(&opts->lock); |
| opts->refcnt++; |
| mutex_unlock(&opts->lock); |
| |
| fsg->function.name = FSG_DRIVER_DESC; |
| fsg->function.bind = fsg_bind; |
| fsg->function.unbind = fsg_unbind; |
| fsg->function.setup = fsg_setup; |
| fsg->function.set_alt = fsg_set_alt; |
| fsg->function.disable = fsg_disable; |
| fsg->function.free_func = fsg_free; |
| |
| fsg->common = common; |
| |
| return &fsg->function; |
| } |
| |
| DECLARE_USB_FUNCTION_INIT(mass_storage, fsg_alloc_inst, fsg_alloc); |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Michal Nazarewicz"); |
| |
| /************************* Module parameters *************************/ |
| |
| |
| void fsg_config_from_params(struct fsg_config *cfg, |
| const struct fsg_module_parameters *params, |
| unsigned int fsg_num_buffers) |
| { |
| struct fsg_lun_config *lun; |
| unsigned i; |
| |
| /* Configure LUNs */ |
| cfg->nluns = |
| min(params->luns ?: (params->file_count ?: 1u), |
| (unsigned)FSG_MAX_LUNS); |
| for (i = 0, lun = cfg->luns; i < cfg->nluns; ++i, ++lun) { |
| lun->ro = !!params->ro[i]; |
| lun->cdrom = !!params->cdrom[i]; |
| lun->removable = !!params->removable[i]; |
| lun->filename = |
| params->file_count > i && params->file[i][0] |
| ? params->file[i] |
| : NULL; |
| } |
| |
| /* Let MSF use defaults */ |
| cfg->vendor_name = NULL; |
| cfg->product_name = NULL; |
| |
| cfg->ops = NULL; |
| cfg->private_data = NULL; |
| |
| /* Finalise */ |
| cfg->can_stall = params->stall; |
| cfg->fsg_num_buffers = fsg_num_buffers; |
| } |
| EXPORT_SYMBOL_GPL(fsg_config_from_params); |