| // SPDX-License-Identifier: GPL-2.0-only |
| // |
| // rt1318-sdw.c -- rt1318 SDCA ALSA SoC amplifier audio driver |
| // |
| // Copyright(c) 2022 Realtek Semiconductor Corp. |
| // |
| // |
| #include <linux/delay.h> |
| #include <linux/device.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/module.h> |
| #include <linux/regmap.h> |
| #include <linux/dmi.h> |
| #include <linux/firmware.h> |
| #include <sound/core.h> |
| #include <sound/pcm.h> |
| #include <sound/pcm_params.h> |
| #include <sound/soc-dapm.h> |
| #include <sound/initval.h> |
| #include "rt1318-sdw.h" |
| |
| static const struct reg_sequence rt1318_blind_write[] = { |
| { 0xc001, 0x43 }, |
| { 0xc003, 0xa2 }, |
| { 0xc004, 0x44 }, |
| { 0xc005, 0x44 }, |
| { 0xc006, 0x33 }, |
| { 0xc007, 0x64 }, |
| { 0xc320, 0x20 }, |
| { 0xf203, 0x18 }, |
| { 0xf211, 0x00 }, |
| { 0xf212, 0x26 }, |
| { 0xf20d, 0x17 }, |
| { 0xf214, 0x06 }, |
| { 0xf20e, 0x00 }, |
| { 0xf223, 0x7f }, |
| { 0xf224, 0xdb }, |
| { 0xf225, 0xee }, |
| { 0xf226, 0x3f }, |
| { 0xf227, 0x0f }, |
| { 0xf21a, 0x78 }, |
| { 0xf242, 0x3c }, |
| { 0xc321, 0x0b }, |
| { 0xc200, 0xd8 }, |
| { 0xc201, 0x27 }, |
| { 0xc202, 0x0f }, |
| { 0xf800, 0x20 }, |
| { 0xdf00, 0x10 }, |
| { 0xdf5f, 0x01 }, |
| { 0xdf60, 0xa7 }, |
| { 0xc400, 0x0e }, |
| { 0xc401, 0x43 }, |
| { 0xc402, 0xe0 }, |
| { 0xc403, 0x00 }, |
| { 0xc404, 0x4c }, |
| { 0xc407, 0x02 }, |
| { 0xc408, 0x3f }, |
| { 0xc300, 0x01 }, |
| { 0xc206, 0x78 }, |
| { 0xc203, 0x84 }, |
| { 0xc120, 0xc0 }, |
| { 0xc121, 0x03 }, |
| { 0xe000, 0x88 }, |
| { 0xc321, 0x09 }, |
| { 0xc322, 0x01 }, |
| { 0xe706, 0x0f }, |
| { 0xe707, 0x30 }, |
| { 0xe806, 0x0f }, |
| { 0xe807, 0x30 }, |
| { 0xed00, 0xb0 }, |
| { 0xce04, 0x02 }, |
| { 0xce05, 0x63 }, |
| { 0xce06, 0x68 }, |
| { 0xce07, 0x07 }, |
| { 0xcf04, 0x02 }, |
| { 0xcf05, 0x63 }, |
| { 0xcf06, 0x68 }, |
| { 0xcf07, 0x07 }, |
| { 0xce60, 0xe3 }, |
| { 0xc130, 0x51 }, |
| { 0xf102, 0x00 }, |
| { 0xf103, 0x00 }, |
| { 0xf104, 0xf5 }, |
| { 0xf105, 0x06 }, |
| { 0xf109, 0x9b }, |
| { 0xf10a, 0x0b }, |
| { 0xf10b, 0x4c }, |
| { 0xf10b, 0x5c }, |
| { 0xf102, 0x00 }, |
| { 0xf103, 0x00 }, |
| { 0xf104, 0xf5 }, |
| { 0xf105, 0x0b }, |
| { 0xf109, 0x03 }, |
| { 0xf10a, 0x0b }, |
| { 0xf10b, 0x4c }, |
| { 0xf10b, 0x5c }, |
| { 0xf102, 0x00 }, |
| { 0xf103, 0x00 }, |
| { 0xf104, 0xf5 }, |
| { 0xf105, 0x0c }, |
| { 0xf109, 0x7f }, |
| { 0xf10a, 0x0b }, |
| { 0xf10b, 0x4c }, |
| { 0xf10b, 0x5c }, |
| |
| { 0xe604, 0x00 }, |
| { 0xdb00, 0x0c }, |
| { 0xdd00, 0x0c }, |
| { 0xdc19, 0x00 }, |
| { 0xdc1a, 0xff }, |
| { 0xdc1b, 0xff }, |
| { 0xdc1c, 0xff }, |
| { 0xdc1d, 0x00 }, |
| { 0xdc1e, 0x00 }, |
| { 0xdc1f, 0x00 }, |
| { 0xdc20, 0xff }, |
| { 0xde19, 0x00 }, |
| { 0xde1a, 0xff }, |
| { 0xde1b, 0xff }, |
| { 0xde1c, 0xff }, |
| { 0xde1d, 0x00 }, |
| { 0xde1e, 0x00 }, |
| { 0xde1f, 0x00 }, |
| { 0xde20, 0xff }, |
| { 0xdb32, 0x00 }, |
| { 0xdd32, 0x00 }, |
| { 0xdb33, 0x0a }, |
| { 0xdd33, 0x0a }, |
| { 0xdb34, 0x1a }, |
| { 0xdd34, 0x1a }, |
| { 0xdb17, 0xef }, |
| { 0xdd17, 0xef }, |
| { 0xdba7, 0x00 }, |
| { 0xdba8, 0x64 }, |
| { 0xdda7, 0x00 }, |
| { 0xdda8, 0x64 }, |
| { 0xdb19, 0x40 }, |
| { 0xdd19, 0x40 }, |
| { 0xdb00, 0x4c }, |
| { 0xdb01, 0x79 }, |
| { 0xdd01, 0x79 }, |
| { 0xdb04, 0x05 }, |
| { 0xdb05, 0x03 }, |
| { 0xdd04, 0x05 }, |
| { 0xdd05, 0x03 }, |
| { 0xdbbb, 0x09 }, |
| { 0xdbbc, 0x30 }, |
| { 0xdbbd, 0xf0 }, |
| { 0xdbbe, 0xf1 }, |
| { 0xddbb, 0x09 }, |
| { 0xddbc, 0x30 }, |
| { 0xddbd, 0xf0 }, |
| { 0xddbe, 0xf1 }, |
| { 0xdb01, 0x79 }, |
| { 0xdd01, 0x79 }, |
| { 0xdc52, 0xef }, |
| { 0xde52, 0xef }, |
| { 0x2f55, 0x22 }, |
| }; |
| |
| static const struct reg_default rt1318_reg_defaults[] = { |
| { 0x3000, 0x00 }, |
| { 0x3004, 0x01 }, |
| { 0x3005, 0x23 }, |
| { 0x3202, 0x00 }, |
| { 0x3203, 0x01 }, |
| { 0x3206, 0x00 }, |
| { 0xc000, 0x00 }, |
| { 0xc001, 0x43 }, |
| { 0xc003, 0x22 }, |
| { 0xc004, 0x44 }, |
| { 0xc005, 0x44 }, |
| { 0xc006, 0x33 }, |
| { 0xc007, 0x64 }, |
| { 0xc008, 0x05 }, |
| { 0xc00a, 0xfc }, |
| { 0xc00b, 0x0f }, |
| { 0xc00c, 0x0e }, |
| { 0xc00d, 0xef }, |
| { 0xc00e, 0xe5 }, |
| { 0xc00f, 0xff }, |
| { 0xc120, 0xc0 }, |
| { 0xc121, 0x00 }, |
| { 0xc122, 0x00 }, |
| { 0xc123, 0x14 }, |
| { 0xc125, 0x00 }, |
| { 0xc200, 0x00 }, |
| { 0xc201, 0x00 }, |
| { 0xc202, 0x00 }, |
| { 0xc203, 0x04 }, |
| { 0xc204, 0x00 }, |
| { 0xc205, 0x00 }, |
| { 0xc206, 0x68 }, |
| { 0xc207, 0x70 }, |
| { 0xc208, 0x00 }, |
| { 0xc20a, 0x00 }, |
| { 0xc20b, 0x01 }, |
| { 0xc20c, 0x7f }, |
| { 0xc20d, 0x01 }, |
| { 0xc20e, 0x7f }, |
| { 0xc300, 0x00 }, |
| { 0xc301, 0x00 }, |
| { 0xc303, 0x80 }, |
| { 0xc320, 0x00 }, |
| { 0xc321, 0x09 }, |
| { 0xc322, 0x02 }, |
| { 0xc410, 0x04 }, |
| { 0xc430, 0x00 }, |
| { 0xc431, 0x00 }, |
| { 0xca00, 0x10 }, |
| { 0xca01, 0x00 }, |
| { 0xca02, 0x0b }, |
| { 0xca10, 0x10 }, |
| { 0xca11, 0x00 }, |
| { 0xca12, 0x0b }, |
| { 0xdd93, 0x00 }, |
| { 0xdd94, 0x64 }, |
| { 0xe300, 0xa0 }, |
| { 0xed00, 0x80 }, |
| { 0xed01, 0x0f }, |
| { 0xed02, 0xff }, |
| { 0xed03, 0x00 }, |
| { 0xed04, 0x00 }, |
| { 0xed05, 0x0f }, |
| { 0xed06, 0xff }, |
| { 0xf010, 0x10 }, |
| { 0xf011, 0xec }, |
| { 0xf012, 0x68 }, |
| { 0xf013, 0x21 }, |
| { 0xf800, 0x00 }, |
| { 0xf801, 0x12 }, |
| { 0xf802, 0xe0 }, |
| { 0xf803, 0x2f }, |
| { 0xf804, 0x00 }, |
| { 0xf805, 0x00 }, |
| { 0xf806, 0x07 }, |
| { 0xf807, 0xff }, |
| { SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, RT1318_SDCA_ENT_UDMPU21, RT1318_SDCA_CTL_UDMPU_CLUSTER, 0), 0x00 }, |
| { SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, RT1318_SDCA_ENT_FU21, RT1318_SDCA_CTL_FU_MUTE, CH_L), 0x01 }, |
| { SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, RT1318_SDCA_ENT_FU21, RT1318_SDCA_CTL_FU_MUTE, CH_R), 0x01 }, |
| { SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, RT1318_SDCA_ENT_PDE23, RT1318_SDCA_CTL_REQ_POWER_STATE, 0), 0x03 }, |
| { SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, RT1318_SDCA_ENT_CS21, RT1318_SDCA_CTL_SAMPLE_FREQ_INDEX, 0), 0x09 }, |
| }; |
| |
| static bool rt1318_readable_register(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case 0x2f55: |
| case 0x3000: |
| case 0x3004 ... 0x3005: |
| case 0x3202 ... 0x3203: |
| case 0x3206: |
| case 0xc000 ... 0xc00f: |
| case 0xc120 ... 0xc125: |
| case 0xc200 ... 0xc20e: |
| case 0xc300 ... 0xc303: |
| case 0xc320 ... 0xc322: |
| case 0xc410: |
| case 0xc430 ... 0xc431: |
| case 0xca00 ... 0xca02: |
| case 0xca10 ... 0xca12: |
| case 0xcb00 ... 0xcb0b: |
| case 0xcc00 ... 0xcce5: |
| case 0xcd00 ... 0xcde5: |
| case 0xce00 ... 0xce6a: |
| case 0xcf00 ... 0xcf53: |
| case 0xd000 ... 0xd0cc: |
| case 0xd100 ... 0xd1b9: |
| case 0xdb00 ... 0xdc53: |
| case 0xdd00 ... 0xde53: |
| case 0xdf00 ... 0xdf6b: |
| case 0xe300: |
| case 0xeb00 ... 0xebcc: |
| case 0xec00 ... 0xecb9: |
| case 0xed00 ... 0xed06: |
| case 0xf010 ... 0xf014: |
| case 0xf800 ... 0xf807: |
| case SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, RT1318_SDCA_ENT_UDMPU21, RT1318_SDCA_CTL_UDMPU_CLUSTER, 0): |
| case SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, RT1318_SDCA_ENT_FU21, RT1318_SDCA_CTL_FU_MUTE, CH_L): |
| case SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, RT1318_SDCA_ENT_FU21, RT1318_SDCA_CTL_FU_MUTE, CH_R): |
| case SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, RT1318_SDCA_ENT_PDE23, RT1318_SDCA_CTL_REQ_POWER_STATE, 0): |
| case SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, RT1318_SDCA_ENT_CS21, RT1318_SDCA_CTL_SAMPLE_FREQ_INDEX, 0): |
| case SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, RT1318_SDCA_ENT_SAPU, RT1318_SDCA_CTL_SAPU_PROTECTION_MODE, 0): |
| case SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, RT1318_SDCA_ENT_SAPU, RT1318_SDCA_CTL_SAPU_PROTECTION_STATUS, 0): |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static bool rt1318_volatile_register(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case 0x2f55: |
| case 0x3000 ... 0x3001: |
| case 0xc000: |
| case 0xc301: |
| case 0xc410: |
| case 0xc430 ... 0xc431: |
| case 0xdb06: |
| case 0xdb12: |
| case 0xdb1d ... 0xdb1f: |
| case 0xdb35: |
| case 0xdb37: |
| case 0xdb8a ... 0xdb92: |
| case 0xdbc5 ... 0xdbc8: |
| case 0xdc2b ... 0xdc49: |
| case 0xdd0b: |
| case 0xdd12: |
| case 0xdd1d ... 0xdd1f: |
| case 0xdd35: |
| case 0xdd8a ... 0xdd92: |
| case 0xddc5 ... 0xddc8: |
| case 0xde2b ... 0xde44: |
| case 0xdf4a ... 0xdf55: |
| case 0xe224 ... 0xe23b: |
| case 0xea01: |
| case 0xebc5: |
| case 0xebc8: |
| case 0xebcb ... 0xebcc: |
| case 0xed03 ... 0xed06: |
| case 0xf010 ... 0xf014: |
| case SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, RT1318_SDCA_ENT_SAPU, RT1318_SDCA_CTL_SAPU_PROTECTION_MODE, 0): |
| case SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, RT1318_SDCA_ENT_SAPU, RT1318_SDCA_CTL_SAPU_PROTECTION_STATUS, 0): |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static const struct regmap_config rt1318_sdw_regmap = { |
| .reg_bits = 32, |
| .val_bits = 8, |
| .readable_reg = rt1318_readable_register, |
| .volatile_reg = rt1318_volatile_register, |
| .max_register = 0x41081488, |
| .reg_defaults = rt1318_reg_defaults, |
| .num_reg_defaults = ARRAY_SIZE(rt1318_reg_defaults), |
| .cache_type = REGCACHE_MAPLE, |
| .use_single_read = true, |
| .use_single_write = true, |
| }; |
| |
| static int rt1318_read_prop(struct sdw_slave *slave) |
| { |
| struct sdw_slave_prop *prop = &slave->prop; |
| int nval; |
| int i, j; |
| u32 bit; |
| unsigned long addr; |
| struct sdw_dpn_prop *dpn; |
| |
| prop->scp_int1_mask = SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY; |
| prop->quirks = SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY; |
| |
| prop->paging_support = true; |
| |
| /* first we need to allocate memory for set bits in port lists */ |
| prop->source_ports = BIT(2); |
| prop->sink_ports = BIT(1); |
| |
| nval = hweight32(prop->source_ports); |
| prop->src_dpn_prop = devm_kcalloc(&slave->dev, nval, |
| sizeof(*prop->src_dpn_prop), GFP_KERNEL); |
| if (!prop->src_dpn_prop) |
| return -ENOMEM; |
| |
| i = 0; |
| dpn = prop->src_dpn_prop; |
| addr = prop->source_ports; |
| for_each_set_bit(bit, &addr, 32) { |
| dpn[i].num = bit; |
| dpn[i].type = SDW_DPN_FULL; |
| dpn[i].simple_ch_prep_sm = true; |
| dpn[i].ch_prep_timeout = 10; |
| i++; |
| } |
| |
| /* do this again for sink now */ |
| nval = hweight32(prop->sink_ports); |
| prop->sink_dpn_prop = devm_kcalloc(&slave->dev, nval, |
| sizeof(*prop->sink_dpn_prop), GFP_KERNEL); |
| if (!prop->sink_dpn_prop) |
| return -ENOMEM; |
| |
| j = 0; |
| dpn = prop->sink_dpn_prop; |
| addr = prop->sink_ports; |
| for_each_set_bit(bit, &addr, 32) { |
| dpn[j].num = bit; |
| dpn[j].type = SDW_DPN_FULL; |
| dpn[j].simple_ch_prep_sm = true; |
| dpn[j].ch_prep_timeout = 10; |
| j++; |
| } |
| |
| /* set the timeout values */ |
| prop->clk_stop_timeout = 20; |
| |
| return 0; |
| } |
| |
| static int rt1318_io_init(struct device *dev, struct sdw_slave *slave) |
| { |
| struct rt1318_sdw_priv *rt1318 = dev_get_drvdata(dev); |
| |
| if (rt1318->hw_init) |
| return 0; |
| |
| regcache_cache_only(rt1318->regmap, false); |
| if (rt1318->first_hw_init) { |
| regcache_cache_bypass(rt1318->regmap, true); |
| } else { |
| /* |
| * PM runtime status is marked as 'active' only when a Slave reports as Attached |
| */ |
| /* update count of parent 'active' children */ |
| pm_runtime_set_active(&slave->dev); |
| } |
| |
| pm_runtime_get_noresume(&slave->dev); |
| |
| /* blind write */ |
| regmap_multi_reg_write(rt1318->regmap, rt1318_blind_write, |
| ARRAY_SIZE(rt1318_blind_write)); |
| |
| if (rt1318->first_hw_init) { |
| regcache_cache_bypass(rt1318->regmap, false); |
| regcache_mark_dirty(rt1318->regmap); |
| } |
| |
| /* Mark Slave initialization complete */ |
| rt1318->first_hw_init = true; |
| rt1318->hw_init = true; |
| |
| pm_runtime_mark_last_busy(&slave->dev); |
| pm_runtime_put_autosuspend(&slave->dev); |
| |
| dev_dbg(&slave->dev, "%s hw_init complete\n", __func__); |
| return 0; |
| } |
| |
| static int rt1318_update_status(struct sdw_slave *slave, |
| enum sdw_slave_status status) |
| { |
| struct rt1318_sdw_priv *rt1318 = dev_get_drvdata(&slave->dev); |
| |
| if (status == SDW_SLAVE_UNATTACHED) |
| rt1318->hw_init = false; |
| |
| /* |
| * Perform initialization only if slave status is present and |
| * hw_init flag is false |
| */ |
| if (rt1318->hw_init || status != SDW_SLAVE_ATTACHED) |
| return 0; |
| |
| /* perform I/O transfers required for Slave initialization */ |
| return rt1318_io_init(&slave->dev, slave); |
| } |
| |
| static int rt1318_classd_event(struct snd_soc_dapm_widget *w, |
| struct snd_kcontrol *kcontrol, int event) |
| { |
| struct snd_soc_component *component = |
| snd_soc_dapm_to_component(w->dapm); |
| struct rt1318_sdw_priv *rt1318 = snd_soc_component_get_drvdata(component); |
| unsigned char ps0 = 0x0, ps3 = 0x3; |
| |
| switch (event) { |
| case SND_SOC_DAPM_POST_PMU: |
| regmap_write(rt1318->regmap, |
| SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, RT1318_SDCA_ENT_PDE23, |
| RT1318_SDCA_CTL_REQ_POWER_STATE, 0), |
| ps0); |
| break; |
| case SND_SOC_DAPM_PRE_PMD: |
| regmap_write(rt1318->regmap, |
| SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, RT1318_SDCA_ENT_PDE23, |
| RT1318_SDCA_CTL_REQ_POWER_STATE, 0), |
| ps3); |
| break; |
| |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static const char * const rt1318_rx_data_ch_select[] = { |
| "L,R", |
| "L,L", |
| "L,R", |
| "L,L+R", |
| "R,L", |
| "R,R", |
| "R,L+R", |
| "L+R,L", |
| "L+R,R", |
| "L+R,L+R", |
| }; |
| |
| static SOC_ENUM_SINGLE_DECL(rt1318_rx_data_ch_enum, |
| SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, RT1318_SDCA_ENT_UDMPU21, RT1318_SDCA_CTL_UDMPU_CLUSTER, 0), 0, |
| rt1318_rx_data_ch_select); |
| |
| static const struct snd_kcontrol_new rt1318_snd_controls[] = { |
| |
| /* UDMPU Cluster Selection */ |
| SOC_ENUM("RX Channel Select", rt1318_rx_data_ch_enum), |
| }; |
| |
| static const struct snd_kcontrol_new rt1318_sto_dac = |
| SOC_DAPM_DOUBLE_R("Switch", |
| SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, RT1318_SDCA_ENT_FU21, RT1318_SDCA_CTL_FU_MUTE, CH_L), |
| SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, RT1318_SDCA_ENT_FU21, RT1318_SDCA_CTL_FU_MUTE, CH_R), |
| 0, 1, 1); |
| |
| static const struct snd_soc_dapm_widget rt1318_dapm_widgets[] = { |
| /* Audio Interface */ |
| SND_SOC_DAPM_AIF_IN("DP1RX", "DP1 Playback", 0, SND_SOC_NOPM, 0, 0), |
| SND_SOC_DAPM_AIF_OUT("DP2TX", "DP2 Capture", 0, SND_SOC_NOPM, 0, 0), |
| |
| /* Digital Interface */ |
| SND_SOC_DAPM_SWITCH("DAC", SND_SOC_NOPM, 0, 0, &rt1318_sto_dac), |
| |
| /* Output */ |
| SND_SOC_DAPM_PGA_E("CLASS D", SND_SOC_NOPM, 0, 0, NULL, 0, |
| rt1318_classd_event, SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMU), |
| SND_SOC_DAPM_OUTPUT("SPOL"), |
| SND_SOC_DAPM_OUTPUT("SPOR"), |
| /* Input */ |
| SND_SOC_DAPM_PGA("FB Data", SND_SOC_NOPM, 0, 0, NULL, 0), |
| SND_SOC_DAPM_SIGGEN("FB Gen"), |
| }; |
| |
| static const struct snd_soc_dapm_route rt1318_dapm_routes[] = { |
| { "DAC", "Switch", "DP1RX" }, |
| { "CLASS D", NULL, "DAC" }, |
| { "SPOL", NULL, "CLASS D" }, |
| { "SPOR", NULL, "CLASS D" }, |
| |
| { "FB Data", NULL, "FB Gen" }, |
| { "DP2TX", NULL, "FB Data" }, |
| }; |
| |
| static int rt1318_set_sdw_stream(struct snd_soc_dai *dai, void *sdw_stream, |
| int direction) |
| { |
| snd_soc_dai_dma_data_set(dai, direction, sdw_stream); |
| |
| return 0; |
| } |
| |
| static void rt1318_sdw_shutdown(struct snd_pcm_substream *substream, |
| struct snd_soc_dai *dai) |
| { |
| snd_soc_dai_set_dma_data(dai, substream, NULL); |
| } |
| |
| static int rt1318_sdw_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) |
| { |
| struct snd_soc_component *component = dai->component; |
| struct rt1318_sdw_priv *rt1318 = |
| snd_soc_component_get_drvdata(component); |
| struct sdw_stream_config stream_config; |
| struct sdw_port_config port_config; |
| enum sdw_data_direction direction; |
| struct sdw_stream_runtime *sdw_stream; |
| int retval, port, num_channels, ch_mask; |
| unsigned int sampling_rate; |
| |
| dev_dbg(dai->dev, "%s %s", __func__, dai->name); |
| sdw_stream = snd_soc_dai_get_dma_data(dai, substream); |
| |
| if (!sdw_stream) |
| return -EINVAL; |
| |
| if (!rt1318->sdw_slave) |
| return -EINVAL; |
| |
| /* SoundWire specific configuration */ |
| /* port 1 for playback */ |
| if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { |
| direction = SDW_DATA_DIR_RX; |
| port = 1; |
| } else { |
| direction = SDW_DATA_DIR_TX; |
| port = 2; |
| } |
| |
| num_channels = params_channels(params); |
| ch_mask = (1 << num_channels) - 1; |
| |
| stream_config.frame_rate = params_rate(params); |
| stream_config.ch_count = num_channels; |
| stream_config.bps = snd_pcm_format_width(params_format(params)); |
| stream_config.direction = direction; |
| |
| port_config.ch_mask = ch_mask; |
| port_config.num = port; |
| |
| retval = sdw_stream_add_slave(rt1318->sdw_slave, &stream_config, |
| &port_config, 1, sdw_stream); |
| if (retval) { |
| dev_err(dai->dev, "%s: Unable to configure port\n", __func__); |
| return retval; |
| } |
| |
| /* sampling rate configuration */ |
| switch (params_rate(params)) { |
| case 16000: |
| sampling_rate = RT1318_SDCA_RATE_16000HZ; |
| break; |
| case 32000: |
| sampling_rate = RT1318_SDCA_RATE_32000HZ; |
| break; |
| case 44100: |
| sampling_rate = RT1318_SDCA_RATE_44100HZ; |
| break; |
| case 48000: |
| sampling_rate = RT1318_SDCA_RATE_48000HZ; |
| break; |
| case 96000: |
| sampling_rate = RT1318_SDCA_RATE_96000HZ; |
| break; |
| case 192000: |
| sampling_rate = RT1318_SDCA_RATE_192000HZ; |
| break; |
| default: |
| dev_err(component->dev, "%s: Rate %d is not supported\n", |
| __func__, params_rate(params)); |
| return -EINVAL; |
| } |
| |
| /* set sampling frequency */ |
| regmap_write(rt1318->regmap, |
| SDW_SDCA_CTL(FUNC_NUM_SMART_AMP, RT1318_SDCA_ENT_CS21, RT1318_SDCA_CTL_SAMPLE_FREQ_INDEX, 0), |
| sampling_rate); |
| |
| return 0; |
| } |
| |
| static int rt1318_sdw_pcm_hw_free(struct snd_pcm_substream *substream, |
| struct snd_soc_dai *dai) |
| { |
| struct snd_soc_component *component = dai->component; |
| struct rt1318_sdw_priv *rt1318 = |
| snd_soc_component_get_drvdata(component); |
| struct sdw_stream_runtime *sdw_stream = |
| snd_soc_dai_get_dma_data(dai, substream); |
| |
| if (!rt1318->sdw_slave) |
| return -EINVAL; |
| |
| sdw_stream_remove_slave(rt1318->sdw_slave, sdw_stream); |
| return 0; |
| } |
| |
| /* |
| * slave_ops: callbacks for get_clock_stop_mode, clock_stop and |
| * port_prep are not defined for now |
| */ |
| static const struct sdw_slave_ops rt1318_slave_ops = { |
| .read_prop = rt1318_read_prop, |
| .update_status = rt1318_update_status, |
| }; |
| |
| static int rt1318_sdw_component_probe(struct snd_soc_component *component) |
| { |
| int ret; |
| struct rt1318_sdw_priv *rt1318 = snd_soc_component_get_drvdata(component); |
| |
| rt1318->component = component; |
| |
| if (!rt1318->first_hw_init) |
| return 0; |
| |
| ret = pm_runtime_resume(component->dev); |
| dev_dbg(&rt1318->sdw_slave->dev, "%s pm_runtime_resume, ret=%d", __func__, ret); |
| if (ret < 0 && ret != -EACCES) |
| return ret; |
| |
| return 0; |
| } |
| |
| static const struct snd_soc_component_driver soc_component_sdw_rt1318 = { |
| .probe = rt1318_sdw_component_probe, |
| .controls = rt1318_snd_controls, |
| .num_controls = ARRAY_SIZE(rt1318_snd_controls), |
| .dapm_widgets = rt1318_dapm_widgets, |
| .num_dapm_widgets = ARRAY_SIZE(rt1318_dapm_widgets), |
| .dapm_routes = rt1318_dapm_routes, |
| .num_dapm_routes = ARRAY_SIZE(rt1318_dapm_routes), |
| .endianness = 1, |
| }; |
| |
| static const struct snd_soc_dai_ops rt1318_aif_dai_ops = { |
| .hw_params = rt1318_sdw_hw_params, |
| .hw_free = rt1318_sdw_pcm_hw_free, |
| .set_stream = rt1318_set_sdw_stream, |
| .shutdown = rt1318_sdw_shutdown, |
| }; |
| |
| #define RT1318_STEREO_RATES (SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \ |
| SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_192000) |
| #define RT1318_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE | \ |
| SNDRV_PCM_FMTBIT_S32_LE) |
| |
| static struct snd_soc_dai_driver rt1318_sdw_dai[] = { |
| { |
| .name = "rt1318-aif", |
| .playback = { |
| .stream_name = "DP1 Playback", |
| .channels_min = 1, |
| .channels_max = 2, |
| .rates = RT1318_STEREO_RATES, |
| .formats = RT1318_FORMATS, |
| }, |
| .capture = { |
| .stream_name = "DP2 Capture", |
| .channels_min = 1, |
| .channels_max = 2, |
| .rates = RT1318_STEREO_RATES, |
| .formats = RT1318_FORMATS, |
| }, |
| .ops = &rt1318_aif_dai_ops, |
| }, |
| }; |
| |
| static int rt1318_sdw_init(struct device *dev, struct regmap *regmap, |
| struct sdw_slave *slave) |
| { |
| struct rt1318_sdw_priv *rt1318; |
| int ret; |
| |
| rt1318 = devm_kzalloc(dev, sizeof(*rt1318), GFP_KERNEL); |
| if (!rt1318) |
| return -ENOMEM; |
| |
| dev_set_drvdata(dev, rt1318); |
| rt1318->sdw_slave = slave; |
| rt1318->regmap = regmap; |
| |
| regcache_cache_only(rt1318->regmap, true); |
| |
| /* |
| * Mark hw_init to false |
| * HW init will be performed when device reports present |
| */ |
| rt1318->hw_init = false; |
| rt1318->first_hw_init = false; |
| |
| ret = devm_snd_soc_register_component(dev, |
| &soc_component_sdw_rt1318, |
| rt1318_sdw_dai, |
| ARRAY_SIZE(rt1318_sdw_dai)); |
| if (ret < 0) |
| return ret; |
| |
| /* set autosuspend parameters */ |
| pm_runtime_set_autosuspend_delay(dev, 3000); |
| pm_runtime_use_autosuspend(dev); |
| |
| /* make sure the device does not suspend immediately */ |
| pm_runtime_mark_last_busy(dev); |
| |
| pm_runtime_enable(dev); |
| |
| /* important note: the device is NOT tagged as 'active' and will remain |
| * 'suspended' until the hardware is enumerated/initialized. This is required |
| * to make sure the ASoC framework use of pm_runtime_get_sync() does not silently |
| * fail with -EACCESS because of race conditions between card creation and enumeration |
| */ |
| |
| dev_dbg(dev, "%s\n", __func__); |
| |
| return ret; |
| } |
| |
| static int rt1318_sdw_probe(struct sdw_slave *slave, |
| const struct sdw_device_id *id) |
| { |
| struct regmap *regmap; |
| |
| /* Regmap Initialization */ |
| regmap = devm_regmap_init_sdw(slave, &rt1318_sdw_regmap); |
| if (IS_ERR(regmap)) |
| return PTR_ERR(regmap); |
| |
| return rt1318_sdw_init(&slave->dev, regmap, slave); |
| } |
| |
| static int rt1318_sdw_remove(struct sdw_slave *slave) |
| { |
| pm_runtime_disable(&slave->dev); |
| |
| return 0; |
| } |
| |
| static const struct sdw_device_id rt1318_id[] = { |
| SDW_SLAVE_ENTRY_EXT(0x025d, 0x1318, 0x3, 0x1, 0), |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(sdw, rt1318_id); |
| |
| static int __maybe_unused rt1318_dev_suspend(struct device *dev) |
| { |
| struct rt1318_sdw_priv *rt1318 = dev_get_drvdata(dev); |
| |
| if (!rt1318->hw_init) |
| return 0; |
| |
| regcache_cache_only(rt1318->regmap, true); |
| return 0; |
| } |
| |
| #define RT1318_PROBE_TIMEOUT 5000 |
| |
| static int __maybe_unused rt1318_dev_resume(struct device *dev) |
| { |
| struct sdw_slave *slave = dev_to_sdw_dev(dev); |
| struct rt1318_sdw_priv *rt1318 = dev_get_drvdata(dev); |
| unsigned long time; |
| |
| if (!rt1318->first_hw_init) |
| return 0; |
| |
| if (!slave->unattach_request) |
| goto regmap_sync; |
| |
| time = wait_for_completion_timeout(&slave->initialization_complete, |
| msecs_to_jiffies(RT1318_PROBE_TIMEOUT)); |
| if (!time) { |
| dev_err(&slave->dev, "%s: Initialization not complete, timed out\n", __func__); |
| return -ETIMEDOUT; |
| } |
| |
| regmap_sync: |
| slave->unattach_request = 0; |
| regcache_cache_only(rt1318->regmap, false); |
| regcache_sync(rt1318->regmap); |
| |
| return 0; |
| } |
| |
| static const struct dev_pm_ops rt1318_pm = { |
| SET_SYSTEM_SLEEP_PM_OPS(rt1318_dev_suspend, rt1318_dev_resume) |
| SET_RUNTIME_PM_OPS(rt1318_dev_suspend, rt1318_dev_resume, NULL) |
| }; |
| |
| static struct sdw_driver rt1318_sdw_driver = { |
| .driver = { |
| .name = "rt1318-sdca", |
| .pm = &rt1318_pm, |
| }, |
| .probe = rt1318_sdw_probe, |
| .remove = rt1318_sdw_remove, |
| .ops = &rt1318_slave_ops, |
| .id_table = rt1318_id, |
| }; |
| module_sdw_driver(rt1318_sdw_driver); |
| |
| MODULE_DESCRIPTION("ASoC RT1318 driver SDCA SDW"); |
| MODULE_AUTHOR("Shuming Fan <shumingf@realtek.com>"); |
| MODULE_LICENSE("GPL"); |