| // SPDX-License-Identifier: GPL-2.0-only |
| // |
| // rt5682-sdw.c -- RT5682 ALSA SoC audio component driver |
| // |
| // Copyright 2019 Realtek Semiconductor Corp. |
| // Author: Oder Chiou <oder_chiou@realtek.com> |
| // |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/pm.h> |
| #include <linux/acpi.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/mutex.h> |
| #include <linux/soundwire/sdw.h> |
| #include <linux/soundwire/sdw_type.h> |
| #include <linux/soundwire/sdw_registers.h> |
| #include <sound/core.h> |
| #include <sound/pcm.h> |
| #include <sound/pcm_params.h> |
| #include <sound/jack.h> |
| #include <sound/sdw.h> |
| #include <sound/soc.h> |
| #include <sound/soc-dapm.h> |
| #include <sound/initval.h> |
| #include <sound/tlv.h> |
| |
| #include "rt5682.h" |
| |
| #define RT5682_SDW_ADDR_L 0x3000 |
| #define RT5682_SDW_ADDR_H 0x3001 |
| #define RT5682_SDW_DATA_L 0x3004 |
| #define RT5682_SDW_DATA_H 0x3005 |
| #define RT5682_SDW_CMD 0x3008 |
| |
| static int rt5682_sdw_read(void *context, unsigned int reg, unsigned int *val) |
| { |
| struct device *dev = context; |
| struct rt5682_priv *rt5682 = dev_get_drvdata(dev); |
| unsigned int data_l, data_h; |
| |
| regmap_write(rt5682->sdw_regmap, RT5682_SDW_CMD, 0); |
| regmap_write(rt5682->sdw_regmap, RT5682_SDW_ADDR_H, (reg >> 8) & 0xff); |
| regmap_write(rt5682->sdw_regmap, RT5682_SDW_ADDR_L, (reg & 0xff)); |
| regmap_read(rt5682->sdw_regmap, RT5682_SDW_DATA_H, &data_h); |
| regmap_read(rt5682->sdw_regmap, RT5682_SDW_DATA_L, &data_l); |
| |
| *val = (data_h << 8) | data_l; |
| |
| dev_vdbg(dev, "[%s] %04x => %04x\n", __func__, reg, *val); |
| |
| return 0; |
| } |
| |
| static int rt5682_sdw_write(void *context, unsigned int reg, unsigned int val) |
| { |
| struct device *dev = context; |
| struct rt5682_priv *rt5682 = dev_get_drvdata(dev); |
| |
| regmap_write(rt5682->sdw_regmap, RT5682_SDW_CMD, 1); |
| regmap_write(rt5682->sdw_regmap, RT5682_SDW_ADDR_H, (reg >> 8) & 0xff); |
| regmap_write(rt5682->sdw_regmap, RT5682_SDW_ADDR_L, (reg & 0xff)); |
| regmap_write(rt5682->sdw_regmap, RT5682_SDW_DATA_H, (val >> 8) & 0xff); |
| regmap_write(rt5682->sdw_regmap, RT5682_SDW_DATA_L, (val & 0xff)); |
| |
| dev_vdbg(dev, "[%s] %04x <= %04x\n", __func__, reg, val); |
| |
| return 0; |
| } |
| |
| static const struct regmap_config rt5682_sdw_indirect_regmap = { |
| .reg_bits = 16, |
| .val_bits = 16, |
| .max_register = RT5682_I2C_MODE, |
| .volatile_reg = rt5682_volatile_register, |
| .readable_reg = rt5682_readable_register, |
| .cache_type = REGCACHE_MAPLE, |
| .reg_defaults = rt5682_reg, |
| .num_reg_defaults = RT5682_REG_NUM, |
| .use_single_read = true, |
| .use_single_write = true, |
| .reg_read = rt5682_sdw_read, |
| .reg_write = rt5682_sdw_write, |
| }; |
| |
| static int rt5682_set_sdw_stream(struct snd_soc_dai *dai, void *sdw_stream, |
| int direction) |
| { |
| snd_soc_dai_dma_data_set(dai, direction, sdw_stream); |
| |
| return 0; |
| } |
| |
| static void rt5682_sdw_shutdown(struct snd_pcm_substream *substream, |
| struct snd_soc_dai *dai) |
| { |
| snd_soc_dai_set_dma_data(dai, substream, NULL); |
| } |
| |
| static int rt5682_sdw_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params, |
| struct snd_soc_dai *dai) |
| { |
| struct snd_soc_component *component = dai->component; |
| struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component); |
| struct sdw_stream_config stream_config = {0}; |
| struct sdw_port_config port_config = {0}; |
| struct sdw_stream_runtime *sdw_stream; |
| int retval; |
| unsigned int val_p = 0, val_c = 0, osr_p = 0, osr_c = 0; |
| |
| dev_dbg(dai->dev, "%s %s", __func__, dai->name); |
| |
| sdw_stream = snd_soc_dai_get_dma_data(dai, substream); |
| if (!sdw_stream) |
| return -ENOMEM; |
| |
| if (!rt5682->slave) |
| return -EINVAL; |
| |
| /* SoundWire specific configuration */ |
| snd_sdw_params_to_config(substream, params, &stream_config, &port_config); |
| |
| if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) |
| port_config.num = 1; |
| else |
| port_config.num = 2; |
| |
| retval = sdw_stream_add_slave(rt5682->slave, &stream_config, |
| &port_config, 1, sdw_stream); |
| if (retval) { |
| dev_err(dai->dev, "%s: Unable to configure port\n", __func__); |
| return retval; |
| } |
| |
| switch (params_rate(params)) { |
| case 48000: |
| val_p = RT5682_SDW_REF_1_48K; |
| val_c = RT5682_SDW_REF_2_48K; |
| break; |
| case 96000: |
| val_p = RT5682_SDW_REF_1_96K; |
| val_c = RT5682_SDW_REF_2_96K; |
| break; |
| case 192000: |
| val_p = RT5682_SDW_REF_1_192K; |
| val_c = RT5682_SDW_REF_2_192K; |
| break; |
| case 32000: |
| val_p = RT5682_SDW_REF_1_32K; |
| val_c = RT5682_SDW_REF_2_32K; |
| break; |
| case 24000: |
| val_p = RT5682_SDW_REF_1_24K; |
| val_c = RT5682_SDW_REF_2_24K; |
| break; |
| case 16000: |
| val_p = RT5682_SDW_REF_1_16K; |
| val_c = RT5682_SDW_REF_2_16K; |
| break; |
| case 12000: |
| val_p = RT5682_SDW_REF_1_12K; |
| val_c = RT5682_SDW_REF_2_12K; |
| break; |
| case 8000: |
| val_p = RT5682_SDW_REF_1_8K; |
| val_c = RT5682_SDW_REF_2_8K; |
| break; |
| case 44100: |
| val_p = RT5682_SDW_REF_1_44K; |
| val_c = RT5682_SDW_REF_2_44K; |
| break; |
| case 88200: |
| val_p = RT5682_SDW_REF_1_88K; |
| val_c = RT5682_SDW_REF_2_88K; |
| break; |
| case 176400: |
| val_p = RT5682_SDW_REF_1_176K; |
| val_c = RT5682_SDW_REF_2_176K; |
| break; |
| case 22050: |
| val_p = RT5682_SDW_REF_1_22K; |
| val_c = RT5682_SDW_REF_2_22K; |
| break; |
| case 11025: |
| val_p = RT5682_SDW_REF_1_11K; |
| val_c = RT5682_SDW_REF_2_11K; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| if (params_rate(params) <= 48000) { |
| osr_p = RT5682_DAC_OSR_D_8; |
| osr_c = RT5682_ADC_OSR_D_8; |
| } else if (params_rate(params) <= 96000) { |
| osr_p = RT5682_DAC_OSR_D_4; |
| osr_c = RT5682_ADC_OSR_D_4; |
| } else { |
| osr_p = RT5682_DAC_OSR_D_2; |
| osr_c = RT5682_ADC_OSR_D_2; |
| } |
| |
| if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { |
| regmap_update_bits(rt5682->regmap, RT5682_SDW_REF_CLK, |
| RT5682_SDW_REF_1_MASK, val_p); |
| regmap_update_bits(rt5682->regmap, RT5682_ADDA_CLK_1, |
| RT5682_DAC_OSR_MASK, osr_p); |
| } else { |
| regmap_update_bits(rt5682->regmap, RT5682_SDW_REF_CLK, |
| RT5682_SDW_REF_2_MASK, val_c); |
| regmap_update_bits(rt5682->regmap, RT5682_ADDA_CLK_1, |
| RT5682_ADC_OSR_MASK, osr_c); |
| } |
| |
| return retval; |
| } |
| |
| static int rt5682_sdw_hw_free(struct snd_pcm_substream *substream, |
| struct snd_soc_dai *dai) |
| { |
| struct snd_soc_component *component = dai->component; |
| struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component); |
| struct sdw_stream_runtime *sdw_stream = |
| snd_soc_dai_get_dma_data(dai, substream); |
| |
| if (!rt5682->slave) |
| return -EINVAL; |
| |
| sdw_stream_remove_slave(rt5682->slave, sdw_stream); |
| return 0; |
| } |
| |
| static const struct snd_soc_dai_ops rt5682_sdw_ops = { |
| .hw_params = rt5682_sdw_hw_params, |
| .hw_free = rt5682_sdw_hw_free, |
| .set_stream = rt5682_set_sdw_stream, |
| .shutdown = rt5682_sdw_shutdown, |
| }; |
| |
| static struct snd_soc_dai_driver rt5682_dai[] = { |
| { |
| .name = "rt5682-aif1", |
| .id = RT5682_AIF1, |
| .playback = { |
| .stream_name = "AIF1 Playback", |
| .channels_min = 1, |
| .channels_max = 2, |
| .rates = RT5682_STEREO_RATES, |
| .formats = RT5682_FORMATS, |
| }, |
| .capture = { |
| .stream_name = "AIF1 Capture", |
| .channels_min = 1, |
| .channels_max = 2, |
| .rates = RT5682_STEREO_RATES, |
| .formats = RT5682_FORMATS, |
| }, |
| .ops = &rt5682_aif1_dai_ops, |
| }, |
| { |
| .name = "rt5682-aif2", |
| .id = RT5682_AIF2, |
| .capture = { |
| .stream_name = "AIF2 Capture", |
| .channels_min = 1, |
| .channels_max = 2, |
| .rates = RT5682_STEREO_RATES, |
| .formats = RT5682_FORMATS, |
| }, |
| .ops = &rt5682_aif2_dai_ops, |
| }, |
| { |
| .name = "rt5682-sdw", |
| .id = RT5682_SDW, |
| .playback = { |
| .stream_name = "SDW Playback", |
| .channels_min = 1, |
| .channels_max = 2, |
| .rates = RT5682_STEREO_RATES, |
| .formats = RT5682_FORMATS, |
| }, |
| .capture = { |
| .stream_name = "SDW Capture", |
| .channels_min = 1, |
| .channels_max = 2, |
| .rates = RT5682_STEREO_RATES, |
| .formats = RT5682_FORMATS, |
| }, |
| .ops = &rt5682_sdw_ops, |
| }, |
| }; |
| |
| static int rt5682_sdw_init(struct device *dev, struct regmap *regmap, |
| struct sdw_slave *slave) |
| { |
| struct rt5682_priv *rt5682; |
| int ret; |
| |
| rt5682 = devm_kzalloc(dev, sizeof(*rt5682), GFP_KERNEL); |
| if (!rt5682) |
| return -ENOMEM; |
| |
| dev_set_drvdata(dev, rt5682); |
| rt5682->slave = slave; |
| rt5682->sdw_regmap = regmap; |
| rt5682->is_sdw = true; |
| |
| mutex_init(&rt5682->disable_irq_lock); |
| |
| rt5682->regmap = devm_regmap_init(dev, NULL, dev, |
| &rt5682_sdw_indirect_regmap); |
| if (IS_ERR(rt5682->regmap)) { |
| ret = PTR_ERR(rt5682->regmap); |
| dev_err(dev, "%s: Failed to allocate register map: %d\n", |
| __func__, ret); |
| return ret; |
| } |
| |
| |
| ret = rt5682_get_ldo1(rt5682, dev); |
| if (ret) |
| return ret; |
| |
| regcache_cache_only(rt5682->sdw_regmap, true); |
| regcache_cache_only(rt5682->regmap, true); |
| |
| /* |
| * Mark hw_init to false |
| * HW init will be performed when device reports present |
| */ |
| rt5682->hw_init = false; |
| rt5682->first_hw_init = false; |
| |
| mutex_init(&rt5682->calibrate_mutex); |
| INIT_DELAYED_WORK(&rt5682->jack_detect_work, |
| rt5682_jack_detect_handler); |
| |
| ret = devm_snd_soc_register_component(dev, |
| &rt5682_soc_component_dev, |
| rt5682_dai, ARRAY_SIZE(rt5682_dai)); |
| if (ret < 0) |
| return ret; |
| |
| /* set autosuspend parameters */ |
| pm_runtime_set_autosuspend_delay(dev, 3000); |
| pm_runtime_use_autosuspend(dev); |
| |
| /* make sure the device does not suspend immediately */ |
| pm_runtime_mark_last_busy(dev); |
| |
| pm_runtime_enable(dev); |
| |
| /* important note: the device is NOT tagged as 'active' and will remain |
| * 'suspended' until the hardware is enumerated/initialized. This is required |
| * to make sure the ASoC framework use of pm_runtime_get_sync() does not silently |
| * fail with -EACCESS because of race conditions between card creation and enumeration |
| */ |
| |
| dev_dbg(dev, "%s\n", __func__); |
| |
| return ret; |
| } |
| |
| static int rt5682_io_init(struct device *dev, struct sdw_slave *slave) |
| { |
| struct rt5682_priv *rt5682 = dev_get_drvdata(dev); |
| int ret = 0, loop = 10; |
| unsigned int val; |
| |
| rt5682->disable_irq = false; |
| |
| if (rt5682->hw_init) |
| return 0; |
| |
| regcache_cache_only(rt5682->sdw_regmap, false); |
| regcache_cache_only(rt5682->regmap, false); |
| if (rt5682->first_hw_init) |
| regcache_cache_bypass(rt5682->regmap, true); |
| |
| /* |
| * PM runtime status is marked as 'active' only when a Slave reports as Attached |
| */ |
| if (!rt5682->first_hw_init) |
| /* update count of parent 'active' children */ |
| pm_runtime_set_active(&slave->dev); |
| |
| pm_runtime_get_noresume(&slave->dev); |
| |
| while (loop > 0) { |
| regmap_read(rt5682->regmap, RT5682_DEVICE_ID, &val); |
| if (val == DEVICE_ID) |
| break; |
| dev_warn(dev, "Device with ID register %x is not rt5682\n", val); |
| usleep_range(30000, 30005); |
| loop--; |
| } |
| |
| if (val != DEVICE_ID) { |
| dev_err(dev, "%s: Device with ID register %x is not rt5682\n", __func__, val); |
| ret = -ENODEV; |
| goto err_nodev; |
| } |
| |
| rt5682_calibrate(rt5682); |
| |
| if (rt5682->first_hw_init) { |
| regcache_cache_bypass(rt5682->regmap, false); |
| regcache_mark_dirty(rt5682->regmap); |
| regcache_sync(rt5682->regmap); |
| |
| /* volatile registers */ |
| regmap_update_bits(rt5682->regmap, RT5682_CBJ_CTRL_2, |
| RT5682_EXT_JD_SRC, RT5682_EXT_JD_SRC_MANUAL); |
| |
| goto reinit; |
| } |
| |
| rt5682_apply_patch_list(rt5682, dev); |
| |
| regmap_write(rt5682->regmap, RT5682_DEPOP_1, 0x0000); |
| |
| regmap_update_bits(rt5682->regmap, RT5682_PWR_ANLG_1, |
| RT5682_LDO1_DVO_MASK | RT5682_HP_DRIVER_MASK, |
| RT5682_LDO1_DVO_12 | RT5682_HP_DRIVER_5X); |
| regmap_write(rt5682->regmap, RT5682_MICBIAS_2, 0x0080); |
| regmap_write(rt5682->regmap, RT5682_TEST_MODE_CTRL_1, 0x0000); |
| regmap_update_bits(rt5682->regmap, RT5682_BIAS_CUR_CTRL_8, |
| RT5682_HPA_CP_BIAS_CTRL_MASK, RT5682_HPA_CP_BIAS_3UA); |
| regmap_update_bits(rt5682->regmap, RT5682_CHARGE_PUMP_1, |
| RT5682_CP_CLK_HP_MASK, RT5682_CP_CLK_HP_300KHZ); |
| regmap_update_bits(rt5682->regmap, RT5682_HP_CHARGE_PUMP_1, |
| RT5682_PM_HP_MASK, RT5682_PM_HP_HV); |
| |
| /* Soundwire */ |
| regmap_write(rt5682->regmap, RT5682_PLL2_INTERNAL, 0xa266); |
| regmap_write(rt5682->regmap, RT5682_PLL2_CTRL_1, 0x1700); |
| regmap_write(rt5682->regmap, RT5682_PLL2_CTRL_2, 0x0006); |
| regmap_write(rt5682->regmap, RT5682_PLL2_CTRL_3, 0x2600); |
| regmap_write(rt5682->regmap, RT5682_PLL2_CTRL_4, 0x0c8f); |
| regmap_write(rt5682->regmap, RT5682_PLL_TRACK_2, 0x3000); |
| regmap_write(rt5682->regmap, RT5682_PLL_TRACK_3, 0x4000); |
| regmap_update_bits(rt5682->regmap, RT5682_GLB_CLK, |
| RT5682_SCLK_SRC_MASK | RT5682_PLL2_SRC_MASK, |
| RT5682_SCLK_SRC_PLL2 | RT5682_PLL2_SRC_SDW); |
| |
| regmap_update_bits(rt5682->regmap, RT5682_CBJ_CTRL_2, |
| RT5682_EXT_JD_SRC, RT5682_EXT_JD_SRC_MANUAL); |
| regmap_write(rt5682->regmap, RT5682_CBJ_CTRL_1, 0xd142); |
| regmap_update_bits(rt5682->regmap, RT5682_CBJ_CTRL_5, 0x0700, 0x0600); |
| regmap_update_bits(rt5682->regmap, RT5682_CBJ_CTRL_3, |
| RT5682_CBJ_IN_BUF_EN, RT5682_CBJ_IN_BUF_EN); |
| regmap_update_bits(rt5682->regmap, RT5682_SAR_IL_CMD_1, |
| RT5682_SAR_POW_MASK, RT5682_SAR_POW_EN); |
| regmap_update_bits(rt5682->regmap, RT5682_RC_CLK_CTRL, |
| RT5682_POW_IRQ | RT5682_POW_JDH | |
| RT5682_POW_ANA, RT5682_POW_IRQ | |
| RT5682_POW_JDH | RT5682_POW_ANA); |
| regmap_update_bits(rt5682->regmap, RT5682_PWR_ANLG_2, |
| RT5682_PWR_JDH, RT5682_PWR_JDH); |
| regmap_update_bits(rt5682->regmap, RT5682_IRQ_CTRL_2, |
| RT5682_JD1_EN_MASK | RT5682_JD1_IRQ_MASK, |
| RT5682_JD1_EN | RT5682_JD1_IRQ_PUL); |
| |
| reinit: |
| mod_delayed_work(system_power_efficient_wq, |
| &rt5682->jack_detect_work, msecs_to_jiffies(250)); |
| |
| /* Mark Slave initialization complete */ |
| rt5682->hw_init = true; |
| rt5682->first_hw_init = true; |
| |
| err_nodev: |
| pm_runtime_mark_last_busy(&slave->dev); |
| pm_runtime_put_autosuspend(&slave->dev); |
| |
| dev_dbg(&slave->dev, "%s hw_init complete: %d\n", __func__, ret); |
| |
| return ret; |
| } |
| |
| static bool rt5682_sdw_readable_register(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case 0x00e0: |
| case 0x00f0: |
| case 0x3000: |
| case 0x3001: |
| case 0x3004: |
| case 0x3005: |
| case 0x3008: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static const struct regmap_config rt5682_sdw_regmap = { |
| .name = "sdw", |
| .reg_bits = 32, |
| .val_bits = 8, |
| .max_register = RT5682_I2C_MODE, |
| .readable_reg = rt5682_sdw_readable_register, |
| .cache_type = REGCACHE_NONE, |
| .use_single_read = true, |
| .use_single_write = true, |
| }; |
| |
| static int rt5682_update_status(struct sdw_slave *slave, |
| enum sdw_slave_status status) |
| { |
| struct rt5682_priv *rt5682 = dev_get_drvdata(&slave->dev); |
| |
| if (status == SDW_SLAVE_UNATTACHED) |
| rt5682->hw_init = false; |
| |
| /* |
| * Perform initialization only if slave status is present and |
| * hw_init flag is false |
| */ |
| if (rt5682->hw_init || status != SDW_SLAVE_ATTACHED) |
| return 0; |
| |
| /* perform I/O transfers required for Slave initialization */ |
| return rt5682_io_init(&slave->dev, slave); |
| } |
| |
| static int rt5682_read_prop(struct sdw_slave *slave) |
| { |
| struct sdw_slave_prop *prop = &slave->prop; |
| int nval, i; |
| u32 bit; |
| unsigned long addr; |
| struct sdw_dpn_prop *dpn; |
| |
| prop->scp_int1_mask = SDW_SCP_INT1_IMPL_DEF | SDW_SCP_INT1_BUS_CLASH | |
| SDW_SCP_INT1_PARITY; |
| prop->quirks = SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY; |
| |
| prop->paging_support = false; |
| |
| /* first we need to allocate memory for set bits in port lists */ |
| prop->source_ports = 0x4; /* BITMAP: 00000100 */ |
| prop->sink_ports = 0x2; /* BITMAP: 00000010 */ |
| |
| nval = hweight32(prop->source_ports); |
| prop->src_dpn_prop = devm_kcalloc(&slave->dev, nval, |
| sizeof(*prop->src_dpn_prop), |
| GFP_KERNEL); |
| if (!prop->src_dpn_prop) |
| return -ENOMEM; |
| |
| i = 0; |
| dpn = prop->src_dpn_prop; |
| addr = prop->source_ports; |
| for_each_set_bit(bit, &addr, 32) { |
| dpn[i].num = bit; |
| dpn[i].type = SDW_DPN_FULL; |
| dpn[i].simple_ch_prep_sm = true; |
| dpn[i].ch_prep_timeout = 10; |
| i++; |
| } |
| |
| /* do this again for sink now */ |
| nval = hweight32(prop->sink_ports); |
| prop->sink_dpn_prop = devm_kcalloc(&slave->dev, nval, |
| sizeof(*prop->sink_dpn_prop), |
| GFP_KERNEL); |
| if (!prop->sink_dpn_prop) |
| return -ENOMEM; |
| |
| i = 0; |
| dpn = prop->sink_dpn_prop; |
| addr = prop->sink_ports; |
| for_each_set_bit(bit, &addr, 32) { |
| dpn[i].num = bit; |
| dpn[i].type = SDW_DPN_FULL; |
| dpn[i].simple_ch_prep_sm = true; |
| dpn[i].ch_prep_timeout = 10; |
| i++; |
| } |
| |
| /* set the timeout values */ |
| prop->clk_stop_timeout = 20; |
| |
| /* wake-up event */ |
| prop->wake_capable = 1; |
| |
| return 0; |
| } |
| |
| /* Bus clock frequency */ |
| #define RT5682_CLK_FREQ_9600000HZ 9600000 |
| #define RT5682_CLK_FREQ_12000000HZ 12000000 |
| #define RT5682_CLK_FREQ_6000000HZ 6000000 |
| #define RT5682_CLK_FREQ_4800000HZ 4800000 |
| #define RT5682_CLK_FREQ_2400000HZ 2400000 |
| #define RT5682_CLK_FREQ_12288000HZ 12288000 |
| |
| static int rt5682_clock_config(struct device *dev) |
| { |
| struct rt5682_priv *rt5682 = dev_get_drvdata(dev); |
| unsigned int clk_freq, value; |
| |
| clk_freq = (rt5682->params.curr_dr_freq >> 1); |
| |
| switch (clk_freq) { |
| case RT5682_CLK_FREQ_12000000HZ: |
| value = 0x0; |
| break; |
| case RT5682_CLK_FREQ_6000000HZ: |
| value = 0x1; |
| break; |
| case RT5682_CLK_FREQ_9600000HZ: |
| value = 0x2; |
| break; |
| case RT5682_CLK_FREQ_4800000HZ: |
| value = 0x3; |
| break; |
| case RT5682_CLK_FREQ_2400000HZ: |
| value = 0x4; |
| break; |
| case RT5682_CLK_FREQ_12288000HZ: |
| value = 0x5; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| regmap_write(rt5682->sdw_regmap, 0xe0, value); |
| regmap_write(rt5682->sdw_regmap, 0xf0, value); |
| |
| dev_dbg(dev, "%s complete, clk_freq=%d\n", __func__, clk_freq); |
| |
| return 0; |
| } |
| |
| static int rt5682_bus_config(struct sdw_slave *slave, |
| struct sdw_bus_params *params) |
| { |
| struct rt5682_priv *rt5682 = dev_get_drvdata(&slave->dev); |
| int ret; |
| |
| memcpy(&rt5682->params, params, sizeof(*params)); |
| |
| ret = rt5682_clock_config(&slave->dev); |
| if (ret < 0) |
| dev_err(&slave->dev, "%s: Invalid clk config", __func__); |
| |
| return ret; |
| } |
| |
| static int rt5682_interrupt_callback(struct sdw_slave *slave, |
| struct sdw_slave_intr_status *status) |
| { |
| struct rt5682_priv *rt5682 = dev_get_drvdata(&slave->dev); |
| |
| dev_dbg(&slave->dev, |
| "%s control_port_stat=%x", __func__, status->control_port); |
| |
| mutex_lock(&rt5682->disable_irq_lock); |
| if (status->control_port & 0x4 && !rt5682->disable_irq) { |
| mod_delayed_work(system_power_efficient_wq, |
| &rt5682->jack_detect_work, msecs_to_jiffies(rt5682->irq_work_delay_time)); |
| } |
| mutex_unlock(&rt5682->disable_irq_lock); |
| |
| return 0; |
| } |
| |
| static const struct sdw_slave_ops rt5682_slave_ops = { |
| .read_prop = rt5682_read_prop, |
| .interrupt_callback = rt5682_interrupt_callback, |
| .update_status = rt5682_update_status, |
| .bus_config = rt5682_bus_config, |
| }; |
| |
| static int rt5682_sdw_probe(struct sdw_slave *slave, |
| const struct sdw_device_id *id) |
| { |
| struct regmap *regmap; |
| |
| /* Regmap Initialization */ |
| regmap = devm_regmap_init_sdw(slave, &rt5682_sdw_regmap); |
| if (IS_ERR(regmap)) |
| return -EINVAL; |
| |
| return rt5682_sdw_init(&slave->dev, regmap, slave); |
| } |
| |
| static int rt5682_sdw_remove(struct sdw_slave *slave) |
| { |
| struct rt5682_priv *rt5682 = dev_get_drvdata(&slave->dev); |
| |
| if (rt5682->hw_init) |
| cancel_delayed_work_sync(&rt5682->jack_detect_work); |
| |
| pm_runtime_disable(&slave->dev); |
| |
| return 0; |
| } |
| |
| static const struct sdw_device_id rt5682_id[] = { |
| SDW_SLAVE_ENTRY_EXT(0x025d, 0x5682, 0x2, 0, 0), |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(sdw, rt5682_id); |
| |
| static int __maybe_unused rt5682_dev_suspend(struct device *dev) |
| { |
| struct rt5682_priv *rt5682 = dev_get_drvdata(dev); |
| |
| if (!rt5682->hw_init) |
| return 0; |
| |
| cancel_delayed_work_sync(&rt5682->jack_detect_work); |
| |
| regcache_cache_only(rt5682->sdw_regmap, true); |
| regcache_cache_only(rt5682->regmap, true); |
| regcache_mark_dirty(rt5682->regmap); |
| |
| return 0; |
| } |
| |
| static int __maybe_unused rt5682_dev_system_suspend(struct device *dev) |
| { |
| struct rt5682_priv *rt5682 = dev_get_drvdata(dev); |
| struct sdw_slave *slave = dev_to_sdw_dev(dev); |
| int ret; |
| |
| if (!rt5682->hw_init) |
| return 0; |
| |
| /* |
| * prevent new interrupts from being handled after the |
| * deferred work completes and before the parent disables |
| * interrupts on the link |
| */ |
| mutex_lock(&rt5682->disable_irq_lock); |
| rt5682->disable_irq = true; |
| ret = sdw_update_no_pm(slave, SDW_SCP_INTMASK1, |
| SDW_SCP_INT1_IMPL_DEF, 0); |
| mutex_unlock(&rt5682->disable_irq_lock); |
| |
| if (ret < 0) { |
| /* log but don't prevent suspend from happening */ |
| dev_dbg(&slave->dev, "%s: could not disable imp-def interrupts\n:", __func__); |
| } |
| |
| return rt5682_dev_suspend(dev); |
| } |
| |
| static int __maybe_unused rt5682_dev_resume(struct device *dev) |
| { |
| struct sdw_slave *slave = dev_to_sdw_dev(dev); |
| struct rt5682_priv *rt5682 = dev_get_drvdata(dev); |
| unsigned long time; |
| |
| if (!rt5682->first_hw_init) |
| return 0; |
| |
| if (!slave->unattach_request) { |
| mutex_lock(&rt5682->disable_irq_lock); |
| if (rt5682->disable_irq == true) { |
| sdw_write_no_pm(slave, SDW_SCP_INTMASK1, SDW_SCP_INT1_IMPL_DEF); |
| rt5682->disable_irq = false; |
| } |
| mutex_unlock(&rt5682->disable_irq_lock); |
| goto regmap_sync; |
| } |
| |
| time = wait_for_completion_timeout(&slave->initialization_complete, |
| msecs_to_jiffies(RT5682_PROBE_TIMEOUT)); |
| if (!time) { |
| dev_err(&slave->dev, "%s: Initialization not complete, timed out\n", __func__); |
| sdw_show_ping_status(slave->bus, true); |
| |
| return -ETIMEDOUT; |
| } |
| |
| regmap_sync: |
| slave->unattach_request = 0; |
| regcache_cache_only(rt5682->sdw_regmap, false); |
| regcache_cache_only(rt5682->regmap, false); |
| regcache_sync(rt5682->regmap); |
| |
| return 0; |
| } |
| |
| static const struct dev_pm_ops rt5682_pm = { |
| SET_SYSTEM_SLEEP_PM_OPS(rt5682_dev_system_suspend, rt5682_dev_resume) |
| SET_RUNTIME_PM_OPS(rt5682_dev_suspend, rt5682_dev_resume, NULL) |
| }; |
| |
| static struct sdw_driver rt5682_sdw_driver = { |
| .driver = { |
| .name = "rt5682", |
| .pm = &rt5682_pm, |
| }, |
| .probe = rt5682_sdw_probe, |
| .remove = rt5682_sdw_remove, |
| .ops = &rt5682_slave_ops, |
| .id_table = rt5682_id, |
| }; |
| module_sdw_driver(rt5682_sdw_driver); |
| |
| MODULE_DESCRIPTION("ASoC RT5682 driver SDW"); |
| MODULE_AUTHOR("Oder Chiou <oder_chiou@realtek.com>"); |
| MODULE_LICENSE("GPL v2"); |