| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Driver for the 1250-EV1 audio I/O module |
| * |
| * Copyright 2011 Wolfson Microelectronics plc |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/i2c.h> |
| #include <linux/gpio/consumer.h> |
| |
| #include <sound/soc.h> |
| #include <sound/soc-dapm.h> |
| |
| struct wm1250_priv { |
| struct gpio_desc *clk_ena; |
| struct gpio_desc *clk_sel0; |
| struct gpio_desc *clk_sel1; |
| struct gpio_desc *osr; |
| struct gpio_desc *master; |
| }; |
| |
| static int wm1250_ev1_set_bias_level(struct snd_soc_component *component, |
| enum snd_soc_bias_level level) |
| { |
| struct wm1250_priv *wm1250 = dev_get_drvdata(component->dev); |
| |
| switch (level) { |
| case SND_SOC_BIAS_ON: |
| break; |
| |
| case SND_SOC_BIAS_PREPARE: |
| break; |
| |
| case SND_SOC_BIAS_STANDBY: |
| gpiod_set_value_cansleep(wm1250->clk_ena, 1); |
| break; |
| |
| case SND_SOC_BIAS_OFF: |
| gpiod_set_value_cansleep(wm1250->clk_ena, 0); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static const struct snd_soc_dapm_widget wm1250_ev1_dapm_widgets[] = { |
| SND_SOC_DAPM_ADC("ADC", "wm1250-ev1 Capture", SND_SOC_NOPM, 0, 0), |
| SND_SOC_DAPM_DAC("DAC", "wm1250-ev1 Playback", SND_SOC_NOPM, 0, 0), |
| |
| SND_SOC_DAPM_INPUT("WM1250 Input"), |
| SND_SOC_DAPM_OUTPUT("WM1250 Output"), |
| }; |
| |
| static const struct snd_soc_dapm_route wm1250_ev1_dapm_routes[] = { |
| { "ADC", NULL, "WM1250 Input" }, |
| { "WM1250 Output", NULL, "DAC" }, |
| }; |
| |
| static int wm1250_ev1_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params, |
| struct snd_soc_dai *dai) |
| { |
| struct wm1250_priv *wm1250 = snd_soc_component_get_drvdata(dai->component); |
| |
| switch (params_rate(params)) { |
| case 8000: |
| gpiod_set_value(wm1250->clk_sel0, 1); |
| gpiod_set_value(wm1250->clk_sel1, 1); |
| break; |
| case 16000: |
| gpiod_set_value(wm1250->clk_sel0, 0); |
| gpiod_set_value(wm1250->clk_sel1, 1); |
| break; |
| case 32000: |
| gpiod_set_value(wm1250->clk_sel0, 1); |
| gpiod_set_value(wm1250->clk_sel1, 0); |
| break; |
| case 64000: |
| gpiod_set_value(wm1250->clk_sel0, 0); |
| gpiod_set_value(wm1250->clk_sel1, 0); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static const struct snd_soc_dai_ops wm1250_ev1_ops = { |
| .hw_params = wm1250_ev1_hw_params, |
| }; |
| |
| #define WM1250_EV1_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |\ |
| SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_64000) |
| |
| static struct snd_soc_dai_driver wm1250_ev1_dai = { |
| .name = "wm1250-ev1", |
| .playback = { |
| .stream_name = "Playback", |
| .channels_min = 1, |
| .channels_max = 2, |
| .rates = WM1250_EV1_RATES, |
| .formats = SNDRV_PCM_FMTBIT_S16_LE, |
| }, |
| .capture = { |
| .stream_name = "Capture", |
| .channels_min = 1, |
| .channels_max = 2, |
| .rates = WM1250_EV1_RATES, |
| .formats = SNDRV_PCM_FMTBIT_S16_LE, |
| }, |
| .ops = &wm1250_ev1_ops, |
| }; |
| |
| static const struct snd_soc_component_driver soc_component_dev_wm1250_ev1 = { |
| .dapm_widgets = wm1250_ev1_dapm_widgets, |
| .num_dapm_widgets = ARRAY_SIZE(wm1250_ev1_dapm_widgets), |
| .dapm_routes = wm1250_ev1_dapm_routes, |
| .num_dapm_routes = ARRAY_SIZE(wm1250_ev1_dapm_routes), |
| .set_bias_level = wm1250_ev1_set_bias_level, |
| .use_pmdown_time = 1, |
| .endianness = 1, |
| }; |
| |
| static int wm1250_ev1_pdata(struct i2c_client *i2c) |
| { |
| struct wm1250_ev1_pdata *pdata = dev_get_platdata(&i2c->dev); |
| struct wm1250_priv *wm1250; |
| |
| if (!pdata) |
| return 0; |
| |
| wm1250 = devm_kzalloc(&i2c->dev, sizeof(*wm1250), GFP_KERNEL); |
| if (!wm1250) |
| return -ENOMEM; |
| |
| wm1250->clk_ena = devm_gpiod_get(&i2c->dev, "clk-ena", GPIOD_OUT_LOW); |
| if (IS_ERR(wm1250->clk_ena)) |
| return dev_err_probe(&i2c->dev, PTR_ERR(wm1250->clk_ena), |
| "failed to get clock enable GPIO\n"); |
| |
| wm1250->clk_sel0 = devm_gpiod_get(&i2c->dev, "clk-sel0", GPIOD_OUT_HIGH); |
| if (IS_ERR(wm1250->clk_sel0)) |
| return dev_err_probe(&i2c->dev, PTR_ERR(wm1250->clk_sel0), |
| "failed to get clock sel0 GPIO\n"); |
| |
| wm1250->clk_sel1 = devm_gpiod_get(&i2c->dev, "clk-sel1", GPIOD_OUT_HIGH); |
| if (IS_ERR(wm1250->clk_sel1)) |
| return dev_err_probe(&i2c->dev, PTR_ERR(wm1250->clk_sel1), |
| "failed to get clock sel1 GPIO\n"); |
| |
| wm1250->osr = devm_gpiod_get(&i2c->dev, "osr", GPIOD_OUT_LOW); |
| if (IS_ERR(wm1250->osr)) |
| return dev_err_probe(&i2c->dev, PTR_ERR(wm1250->osr), |
| "failed to get OSR GPIO\n"); |
| |
| wm1250->master = devm_gpiod_get(&i2c->dev, "master", GPIOD_OUT_LOW); |
| if (IS_ERR(wm1250->master)) |
| return dev_err_probe(&i2c->dev, PTR_ERR(wm1250->master), |
| "failed to get MASTER GPIO\n"); |
| |
| dev_set_drvdata(&i2c->dev, wm1250); |
| |
| return 0; |
| } |
| |
| static int wm1250_ev1_probe(struct i2c_client *i2c) |
| { |
| int id, board, rev, ret; |
| |
| dev_set_drvdata(&i2c->dev, NULL); |
| |
| board = i2c_smbus_read_byte_data(i2c, 0); |
| if (board < 0) { |
| dev_err(&i2c->dev, "Failed to read ID: %d\n", board); |
| return board; |
| } |
| |
| id = (board & 0xfe) >> 2; |
| rev = board & 0x3; |
| |
| if (id != 1) { |
| dev_err(&i2c->dev, "Unknown board ID %d\n", id); |
| return -ENODEV; |
| } |
| |
| dev_info(&i2c->dev, "revision %d\n", rev + 1); |
| |
| ret = wm1250_ev1_pdata(i2c); |
| if (ret != 0) |
| return ret; |
| |
| ret = devm_snd_soc_register_component(&i2c->dev, &soc_component_dev_wm1250_ev1, |
| &wm1250_ev1_dai, 1); |
| if (ret != 0) { |
| dev_err(&i2c->dev, "Failed to register CODEC: %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static const struct i2c_device_id wm1250_ev1_i2c_id[] = { |
| { "wm1250-ev1" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, wm1250_ev1_i2c_id); |
| |
| static struct i2c_driver wm1250_ev1_i2c_driver = { |
| .driver = { |
| .name = "wm1250-ev1", |
| }, |
| .probe = wm1250_ev1_probe, |
| .id_table = wm1250_ev1_i2c_id, |
| }; |
| |
| module_i2c_driver(wm1250_ev1_i2c_driver); |
| |
| MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); |
| MODULE_DESCRIPTION("WM1250-EV1 audio I/O module driver"); |
| MODULE_LICENSE("GPL"); |