| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * wm5100.c -- WM5100 ALSA SoC Audio driver |
| * |
| * Copyright 2011-2 Wolfson Microelectronics plc |
| * |
| * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/export.h> |
| #include <linux/pm.h> |
| #include <linux/gcd.h> |
| #include <linux/gpio/driver.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/i2c.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/regulator/fixed.h> |
| #include <linux/slab.h> |
| #include <sound/core.h> |
| #include <sound/pcm.h> |
| #include <sound/pcm_params.h> |
| #include <sound/soc.h> |
| #include <sound/jack.h> |
| #include <sound/initval.h> |
| #include <sound/tlv.h> |
| #include <sound/wm5100.h> |
| |
| #include "wm5100.h" |
| |
| #define WM5100_NUM_CORE_SUPPLIES 2 |
| static const char *wm5100_core_supply_names[WM5100_NUM_CORE_SUPPLIES] = { |
| "DBVDD1", |
| "LDOVDD", /* If DCVDD is supplied externally specify as LDOVDD */ |
| }; |
| |
| #define WM5100_AIFS 3 |
| #define WM5100_SYNC_SRS 3 |
| |
| struct wm5100_fll { |
| int fref; |
| int fout; |
| int src; |
| struct completion lock; |
| }; |
| |
| /* codec private data */ |
| struct wm5100_priv { |
| struct device *dev; |
| struct regmap *regmap; |
| struct snd_soc_component *component; |
| |
| struct regulator_bulk_data core_supplies[WM5100_NUM_CORE_SUPPLIES]; |
| struct gpio_desc *reset; |
| struct gpio_desc *ldo_ena; |
| struct gpio_desc *hp_pol; |
| |
| int rev; |
| |
| int sysclk; |
| int asyncclk; |
| |
| bool aif_async[WM5100_AIFS]; |
| bool aif_symmetric[WM5100_AIFS]; |
| int sr_ref[WM5100_SYNC_SRS]; |
| |
| bool out_ena[2]; |
| |
| struct snd_soc_jack *jack; |
| bool jack_detecting; |
| bool jack_mic; |
| int jack_mode; |
| int jack_flips; |
| |
| struct wm5100_fll fll[2]; |
| |
| struct wm5100_pdata pdata; |
| |
| #ifdef CONFIG_GPIOLIB |
| struct gpio_chip gpio_chip; |
| #endif |
| }; |
| |
| static int wm5100_sr_code[] = { |
| 0, |
| 12000, |
| 24000, |
| 48000, |
| 96000, |
| 192000, |
| 384000, |
| 768000, |
| 0, |
| 11025, |
| 22050, |
| 44100, |
| 88200, |
| 176400, |
| 352800, |
| 705600, |
| 4000, |
| 8000, |
| 16000, |
| 32000, |
| 64000, |
| 128000, |
| 256000, |
| 512000, |
| }; |
| |
| static int wm5100_sr_regs[WM5100_SYNC_SRS] = { |
| WM5100_CLOCKING_4, |
| WM5100_CLOCKING_5, |
| WM5100_CLOCKING_6, |
| }; |
| |
| static int wm5100_alloc_sr(struct snd_soc_component *component, int rate) |
| { |
| struct wm5100_priv *wm5100 = snd_soc_component_get_drvdata(component); |
| int sr_code, sr_free, i; |
| |
| for (i = 0; i < ARRAY_SIZE(wm5100_sr_code); i++) |
| if (wm5100_sr_code[i] == rate) |
| break; |
| if (i == ARRAY_SIZE(wm5100_sr_code)) { |
| dev_err(component->dev, "Unsupported sample rate: %dHz\n", rate); |
| return -EINVAL; |
| } |
| sr_code = i; |
| |
| if ((wm5100->sysclk % rate) == 0) { |
| /* Is this rate already in use? */ |
| sr_free = -1; |
| for (i = 0; i < ARRAY_SIZE(wm5100_sr_regs); i++) { |
| if (!wm5100->sr_ref[i] && sr_free == -1) { |
| sr_free = i; |
| continue; |
| } |
| if ((snd_soc_component_read(component, wm5100_sr_regs[i]) & |
| WM5100_SAMPLE_RATE_1_MASK) == sr_code) |
| break; |
| } |
| |
| if (i < ARRAY_SIZE(wm5100_sr_regs)) { |
| wm5100->sr_ref[i]++; |
| dev_dbg(component->dev, "SR %dHz, slot %d, ref %d\n", |
| rate, i, wm5100->sr_ref[i]); |
| return i; |
| } |
| |
| if (sr_free == -1) { |
| dev_err(component->dev, "All SR slots already in use\n"); |
| return -EBUSY; |
| } |
| |
| dev_dbg(component->dev, "Allocating SR slot %d for %dHz\n", |
| sr_free, rate); |
| wm5100->sr_ref[sr_free]++; |
| snd_soc_component_update_bits(component, wm5100_sr_regs[sr_free], |
| WM5100_SAMPLE_RATE_1_MASK, |
| sr_code); |
| |
| return sr_free; |
| |
| } else { |
| dev_err(component->dev, |
| "SR %dHz incompatible with %dHz SYSCLK and %dHz ASYNCCLK\n", |
| rate, wm5100->sysclk, wm5100->asyncclk); |
| return -EINVAL; |
| } |
| } |
| |
| static void wm5100_free_sr(struct snd_soc_component *component, int rate) |
| { |
| struct wm5100_priv *wm5100 = snd_soc_component_get_drvdata(component); |
| int i, sr_code; |
| |
| for (i = 0; i < ARRAY_SIZE(wm5100_sr_code); i++) |
| if (wm5100_sr_code[i] == rate) |
| break; |
| if (i == ARRAY_SIZE(wm5100_sr_code)) { |
| dev_err(component->dev, "Unsupported sample rate: %dHz\n", rate); |
| return; |
| } |
| sr_code = wm5100_sr_code[i]; |
| |
| for (i = 0; i < ARRAY_SIZE(wm5100_sr_regs); i++) { |
| if (!wm5100->sr_ref[i]) |
| continue; |
| |
| if ((snd_soc_component_read(component, wm5100_sr_regs[i]) & |
| WM5100_SAMPLE_RATE_1_MASK) == sr_code) |
| break; |
| } |
| if (i < ARRAY_SIZE(wm5100_sr_regs)) { |
| wm5100->sr_ref[i]--; |
| dev_dbg(component->dev, "Dereference SR %dHz, count now %d\n", |
| rate, wm5100->sr_ref[i]); |
| } else { |
| dev_warn(component->dev, "Freeing unreferenced sample rate %dHz\n", |
| rate); |
| } |
| } |
| |
| static int wm5100_reset(struct wm5100_priv *wm5100) |
| { |
| if (wm5100->reset) { |
| gpiod_set_value_cansleep(wm5100->reset, 1); |
| gpiod_set_value_cansleep(wm5100->reset, 0); |
| |
| return 0; |
| } else { |
| return regmap_write(wm5100->regmap, WM5100_SOFTWARE_RESET, 0); |
| } |
| } |
| |
| static DECLARE_TLV_DB_SCALE(in_tlv, -6300, 100, 0); |
| static DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0); |
| static DECLARE_TLV_DB_SCALE(mixer_tlv, -3200, 100, 0); |
| static DECLARE_TLV_DB_SCALE(out_tlv, -6400, 100, 0); |
| static DECLARE_TLV_DB_SCALE(digital_tlv, -6400, 50, 0); |
| |
| static const char *wm5100_mixer_texts[] = { |
| "None", |
| "Tone Generator 1", |
| "Tone Generator 2", |
| "AEC loopback", |
| "IN1L", |
| "IN1R", |
| "IN2L", |
| "IN2R", |
| "IN3L", |
| "IN3R", |
| "IN4L", |
| "IN4R", |
| "AIF1RX1", |
| "AIF1RX2", |
| "AIF1RX3", |
| "AIF1RX4", |
| "AIF1RX5", |
| "AIF1RX6", |
| "AIF1RX7", |
| "AIF1RX8", |
| "AIF2RX1", |
| "AIF2RX2", |
| "AIF3RX1", |
| "AIF3RX2", |
| "EQ1", |
| "EQ2", |
| "EQ3", |
| "EQ4", |
| "DRC1L", |
| "DRC1R", |
| "LHPF1", |
| "LHPF2", |
| "LHPF3", |
| "LHPF4", |
| "DSP1.1", |
| "DSP1.2", |
| "DSP1.3", |
| "DSP1.4", |
| "DSP1.5", |
| "DSP1.6", |
| "DSP2.1", |
| "DSP2.2", |
| "DSP2.3", |
| "DSP2.4", |
| "DSP2.5", |
| "DSP2.6", |
| "DSP3.1", |
| "DSP3.2", |
| "DSP3.3", |
| "DSP3.4", |
| "DSP3.5", |
| "DSP3.6", |
| "ASRC1L", |
| "ASRC1R", |
| "ASRC2L", |
| "ASRC2R", |
| "ISRC1INT1", |
| "ISRC1INT2", |
| "ISRC1INT3", |
| "ISRC1INT4", |
| "ISRC2INT1", |
| "ISRC2INT2", |
| "ISRC2INT3", |
| "ISRC2INT4", |
| "ISRC1DEC1", |
| "ISRC1DEC2", |
| "ISRC1DEC3", |
| "ISRC1DEC4", |
| "ISRC2DEC1", |
| "ISRC2DEC2", |
| "ISRC2DEC3", |
| "ISRC2DEC4", |
| }; |
| |
| static int wm5100_mixer_values[] = { |
| 0x00, |
| 0x04, /* Tone */ |
| 0x05, |
| 0x08, /* AEC */ |
| 0x10, /* Input */ |
| 0x11, |
| 0x12, |
| 0x13, |
| 0x14, |
| 0x15, |
| 0x16, |
| 0x17, |
| 0x20, /* AIF */ |
| 0x21, |
| 0x22, |
| 0x23, |
| 0x24, |
| 0x25, |
| 0x26, |
| 0x27, |
| 0x28, |
| 0x29, |
| 0x30, /* AIF3 - check */ |
| 0x31, |
| 0x50, /* EQ */ |
| 0x51, |
| 0x52, |
| 0x53, |
| 0x54, |
| 0x58, /* DRC */ |
| 0x59, |
| 0x60, /* LHPF1 */ |
| 0x61, /* LHPF2 */ |
| 0x62, /* LHPF3 */ |
| 0x63, /* LHPF4 */ |
| 0x68, /* DSP1 */ |
| 0x69, |
| 0x6a, |
| 0x6b, |
| 0x6c, |
| 0x6d, |
| 0x70, /* DSP2 */ |
| 0x71, |
| 0x72, |
| 0x73, |
| 0x74, |
| 0x75, |
| 0x78, /* DSP3 */ |
| 0x79, |
| 0x7a, |
| 0x7b, |
| 0x7c, |
| 0x7d, |
| 0x90, /* ASRC1 */ |
| 0x91, |
| 0x92, /* ASRC2 */ |
| 0x93, |
| 0xa0, /* ISRC1DEC1 */ |
| 0xa1, |
| 0xa2, |
| 0xa3, |
| 0xa4, /* ISRC1INT1 */ |
| 0xa5, |
| 0xa6, |
| 0xa7, |
| 0xa8, /* ISRC2DEC1 */ |
| 0xa9, |
| 0xaa, |
| 0xab, |
| 0xac, /* ISRC2INT1 */ |
| 0xad, |
| 0xae, |
| 0xaf, |
| }; |
| |
| #define WM5100_MIXER_CONTROLS(name, base) \ |
| SOC_SINGLE_TLV(name " Input 1 Volume", base + 1 , \ |
| WM5100_MIXER_VOL_SHIFT, 80, 0, mixer_tlv), \ |
| SOC_SINGLE_TLV(name " Input 2 Volume", base + 3 , \ |
| WM5100_MIXER_VOL_SHIFT, 80, 0, mixer_tlv), \ |
| SOC_SINGLE_TLV(name " Input 3 Volume", base + 5 , \ |
| WM5100_MIXER_VOL_SHIFT, 80, 0, mixer_tlv), \ |
| SOC_SINGLE_TLV(name " Input 4 Volume", base + 7 , \ |
| WM5100_MIXER_VOL_SHIFT, 80, 0, mixer_tlv) |
| |
| #define WM5100_MUX_ENUM_DECL(name, reg) \ |
| SOC_VALUE_ENUM_SINGLE_DECL(name, reg, 0, 0xff, \ |
| wm5100_mixer_texts, wm5100_mixer_values) |
| |
| #define WM5100_MUX_CTL_DECL(name) \ |
| const struct snd_kcontrol_new name##_mux = \ |
| SOC_DAPM_ENUM("Route", name##_enum) |
| |
| #define WM5100_MIXER_ENUMS(name, base_reg) \ |
| static WM5100_MUX_ENUM_DECL(name##_in1_enum, base_reg); \ |
| static WM5100_MUX_ENUM_DECL(name##_in2_enum, base_reg + 2); \ |
| static WM5100_MUX_ENUM_DECL(name##_in3_enum, base_reg + 4); \ |
| static WM5100_MUX_ENUM_DECL(name##_in4_enum, base_reg + 6); \ |
| static WM5100_MUX_CTL_DECL(name##_in1); \ |
| static WM5100_MUX_CTL_DECL(name##_in2); \ |
| static WM5100_MUX_CTL_DECL(name##_in3); \ |
| static WM5100_MUX_CTL_DECL(name##_in4) |
| |
| WM5100_MIXER_ENUMS(HPOUT1L, WM5100_OUT1LMIX_INPUT_1_SOURCE); |
| WM5100_MIXER_ENUMS(HPOUT1R, WM5100_OUT1RMIX_INPUT_1_SOURCE); |
| WM5100_MIXER_ENUMS(HPOUT2L, WM5100_OUT2LMIX_INPUT_1_SOURCE); |
| WM5100_MIXER_ENUMS(HPOUT2R, WM5100_OUT2RMIX_INPUT_1_SOURCE); |
| WM5100_MIXER_ENUMS(HPOUT3L, WM5100_OUT3LMIX_INPUT_1_SOURCE); |
| WM5100_MIXER_ENUMS(HPOUT3R, WM5100_OUT3RMIX_INPUT_1_SOURCE); |
| |
| WM5100_MIXER_ENUMS(SPKOUTL, WM5100_OUT4LMIX_INPUT_1_SOURCE); |
| WM5100_MIXER_ENUMS(SPKOUTR, WM5100_OUT4RMIX_INPUT_1_SOURCE); |
| WM5100_MIXER_ENUMS(SPKDAT1L, WM5100_OUT5LMIX_INPUT_1_SOURCE); |
| WM5100_MIXER_ENUMS(SPKDAT1R, WM5100_OUT5RMIX_INPUT_1_SOURCE); |
| WM5100_MIXER_ENUMS(SPKDAT2L, WM5100_OUT6LMIX_INPUT_1_SOURCE); |
| WM5100_MIXER_ENUMS(SPKDAT2R, WM5100_OUT6RMIX_INPUT_1_SOURCE); |
| |
| WM5100_MIXER_ENUMS(PWM1, WM5100_PWM1MIX_INPUT_1_SOURCE); |
| WM5100_MIXER_ENUMS(PWM2, WM5100_PWM1MIX_INPUT_1_SOURCE); |
| |
| WM5100_MIXER_ENUMS(AIF1TX1, WM5100_AIF1TX1MIX_INPUT_1_SOURCE); |
| WM5100_MIXER_ENUMS(AIF1TX2, WM5100_AIF1TX2MIX_INPUT_1_SOURCE); |
| WM5100_MIXER_ENUMS(AIF1TX3, WM5100_AIF1TX3MIX_INPUT_1_SOURCE); |
| WM5100_MIXER_ENUMS(AIF1TX4, WM5100_AIF1TX4MIX_INPUT_1_SOURCE); |
| WM5100_MIXER_ENUMS(AIF1TX5, WM5100_AIF1TX5MIX_INPUT_1_SOURCE); |
| WM5100_MIXER_ENUMS(AIF1TX6, WM5100_AIF1TX6MIX_INPUT_1_SOURCE); |
| WM5100_MIXER_ENUMS(AIF1TX7, WM5100_AIF1TX7MIX_INPUT_1_SOURCE); |
| WM5100_MIXER_ENUMS(AIF1TX8, WM5100_AIF1TX8MIX_INPUT_1_SOURCE); |
| |
| WM5100_MIXER_ENUMS(AIF2TX1, WM5100_AIF2TX1MIX_INPUT_1_SOURCE); |
| WM5100_MIXER_ENUMS(AIF2TX2, WM5100_AIF2TX2MIX_INPUT_1_SOURCE); |
| |
| WM5100_MIXER_ENUMS(AIF3TX1, WM5100_AIF1TX1MIX_INPUT_1_SOURCE); |
| WM5100_MIXER_ENUMS(AIF3TX2, WM5100_AIF1TX2MIX_INPUT_1_SOURCE); |
| |
| WM5100_MIXER_ENUMS(EQ1, WM5100_EQ1MIX_INPUT_1_SOURCE); |
| WM5100_MIXER_ENUMS(EQ2, WM5100_EQ2MIX_INPUT_1_SOURCE); |
| WM5100_MIXER_ENUMS(EQ3, WM5100_EQ3MIX_INPUT_1_SOURCE); |
| WM5100_MIXER_ENUMS(EQ4, WM5100_EQ4MIX_INPUT_1_SOURCE); |
| |
| WM5100_MIXER_ENUMS(DRC1L, WM5100_DRC1LMIX_INPUT_1_SOURCE); |
| WM5100_MIXER_ENUMS(DRC1R, WM5100_DRC1RMIX_INPUT_1_SOURCE); |
| |
| WM5100_MIXER_ENUMS(LHPF1, WM5100_HPLP1MIX_INPUT_1_SOURCE); |
| WM5100_MIXER_ENUMS(LHPF2, WM5100_HPLP2MIX_INPUT_1_SOURCE); |
| WM5100_MIXER_ENUMS(LHPF3, WM5100_HPLP3MIX_INPUT_1_SOURCE); |
| WM5100_MIXER_ENUMS(LHPF4, WM5100_HPLP4MIX_INPUT_1_SOURCE); |
| |
| #define WM5100_MUX(name, ctrl) \ |
| SND_SOC_DAPM_MUX(name, SND_SOC_NOPM, 0, 0, ctrl) |
| |
| #define WM5100_MIXER_WIDGETS(name, name_str) \ |
| WM5100_MUX(name_str " Input 1", &name##_in1_mux), \ |
| WM5100_MUX(name_str " Input 2", &name##_in2_mux), \ |
| WM5100_MUX(name_str " Input 3", &name##_in3_mux), \ |
| WM5100_MUX(name_str " Input 4", &name##_in4_mux), \ |
| SND_SOC_DAPM_MIXER(name_str " Mixer", SND_SOC_NOPM, 0, 0, NULL, 0) |
| |
| #define WM5100_MIXER_INPUT_ROUTES(name) \ |
| { name, "Tone Generator 1", "Tone Generator 1" }, \ |
| { name, "Tone Generator 2", "Tone Generator 2" }, \ |
| { name, "IN1L", "IN1L PGA" }, \ |
| { name, "IN1R", "IN1R PGA" }, \ |
| { name, "IN2L", "IN2L PGA" }, \ |
| { name, "IN2R", "IN2R PGA" }, \ |
| { name, "IN3L", "IN3L PGA" }, \ |
| { name, "IN3R", "IN3R PGA" }, \ |
| { name, "IN4L", "IN4L PGA" }, \ |
| { name, "IN4R", "IN4R PGA" }, \ |
| { name, "AIF1RX1", "AIF1RX1" }, \ |
| { name, "AIF1RX2", "AIF1RX2" }, \ |
| { name, "AIF1RX3", "AIF1RX3" }, \ |
| { name, "AIF1RX4", "AIF1RX4" }, \ |
| { name, "AIF1RX5", "AIF1RX5" }, \ |
| { name, "AIF1RX6", "AIF1RX6" }, \ |
| { name, "AIF1RX7", "AIF1RX7" }, \ |
| { name, "AIF1RX8", "AIF1RX8" }, \ |
| { name, "AIF2RX1", "AIF2RX1" }, \ |
| { name, "AIF2RX2", "AIF2RX2" }, \ |
| { name, "AIF3RX1", "AIF3RX1" }, \ |
| { name, "AIF3RX2", "AIF3RX2" }, \ |
| { name, "EQ1", "EQ1" }, \ |
| { name, "EQ2", "EQ2" }, \ |
| { name, "EQ3", "EQ3" }, \ |
| { name, "EQ4", "EQ4" }, \ |
| { name, "DRC1L", "DRC1L" }, \ |
| { name, "DRC1R", "DRC1R" }, \ |
| { name, "LHPF1", "LHPF1" }, \ |
| { name, "LHPF2", "LHPF2" }, \ |
| { name, "LHPF3", "LHPF3" }, \ |
| { name, "LHPF4", "LHPF4" } |
| |
| #define WM5100_MIXER_ROUTES(widget, name) \ |
| { widget, NULL, name " Mixer" }, \ |
| { name " Mixer", NULL, name " Input 1" }, \ |
| { name " Mixer", NULL, name " Input 2" }, \ |
| { name " Mixer", NULL, name " Input 3" }, \ |
| { name " Mixer", NULL, name " Input 4" }, \ |
| WM5100_MIXER_INPUT_ROUTES(name " Input 1"), \ |
| WM5100_MIXER_INPUT_ROUTES(name " Input 2"), \ |
| WM5100_MIXER_INPUT_ROUTES(name " Input 3"), \ |
| WM5100_MIXER_INPUT_ROUTES(name " Input 4") |
| |
| static const char *wm5100_lhpf_mode_text[] = { |
| "Low-pass", "High-pass" |
| }; |
| |
| static SOC_ENUM_SINGLE_DECL(wm5100_lhpf1_mode, |
| WM5100_HPLPF1_1, WM5100_LHPF1_MODE_SHIFT, |
| wm5100_lhpf_mode_text); |
| |
| static SOC_ENUM_SINGLE_DECL(wm5100_lhpf2_mode, |
| WM5100_HPLPF2_1, WM5100_LHPF2_MODE_SHIFT, |
| wm5100_lhpf_mode_text); |
| |
| static SOC_ENUM_SINGLE_DECL(wm5100_lhpf3_mode, |
| WM5100_HPLPF3_1, WM5100_LHPF3_MODE_SHIFT, |
| wm5100_lhpf_mode_text); |
| |
| static SOC_ENUM_SINGLE_DECL(wm5100_lhpf4_mode, |
| WM5100_HPLPF4_1, WM5100_LHPF4_MODE_SHIFT, |
| wm5100_lhpf_mode_text); |
| |
| static const struct snd_kcontrol_new wm5100_snd_controls[] = { |
| SOC_SINGLE("IN1 High Performance Switch", WM5100_IN1L_CONTROL, |
| WM5100_IN1_OSR_SHIFT, 1, 0), |
| SOC_SINGLE("IN2 High Performance Switch", WM5100_IN2L_CONTROL, |
| WM5100_IN2_OSR_SHIFT, 1, 0), |
| SOC_SINGLE("IN3 High Performance Switch", WM5100_IN3L_CONTROL, |
| WM5100_IN3_OSR_SHIFT, 1, 0), |
| SOC_SINGLE("IN4 High Performance Switch", WM5100_IN4L_CONTROL, |
| WM5100_IN4_OSR_SHIFT, 1, 0), |
| |
| /* Only applicable for analogue inputs */ |
| SOC_DOUBLE_R_TLV("IN1 Volume", WM5100_IN1L_CONTROL, WM5100_IN1R_CONTROL, |
| WM5100_IN1L_PGA_VOL_SHIFT, 94, 0, in_tlv), |
| SOC_DOUBLE_R_TLV("IN2 Volume", WM5100_IN2L_CONTROL, WM5100_IN2R_CONTROL, |
| WM5100_IN2L_PGA_VOL_SHIFT, 94, 0, in_tlv), |
| SOC_DOUBLE_R_TLV("IN3 Volume", WM5100_IN3L_CONTROL, WM5100_IN3R_CONTROL, |
| WM5100_IN3L_PGA_VOL_SHIFT, 94, 0, in_tlv), |
| SOC_DOUBLE_R_TLV("IN4 Volume", WM5100_IN4L_CONTROL, WM5100_IN4R_CONTROL, |
| WM5100_IN4L_PGA_VOL_SHIFT, 94, 0, in_tlv), |
| |
| SOC_DOUBLE_R_TLV("IN1 Digital Volume", WM5100_ADC_DIGITAL_VOLUME_1L, |
| WM5100_ADC_DIGITAL_VOLUME_1R, WM5100_IN1L_VOL_SHIFT, 191, |
| 0, digital_tlv), |
| SOC_DOUBLE_R_TLV("IN2 Digital Volume", WM5100_ADC_DIGITAL_VOLUME_2L, |
| WM5100_ADC_DIGITAL_VOLUME_2R, WM5100_IN2L_VOL_SHIFT, 191, |
| 0, digital_tlv), |
| SOC_DOUBLE_R_TLV("IN3 Digital Volume", WM5100_ADC_DIGITAL_VOLUME_3L, |
| WM5100_ADC_DIGITAL_VOLUME_3R, WM5100_IN3L_VOL_SHIFT, 191, |
| 0, digital_tlv), |
| SOC_DOUBLE_R_TLV("IN4 Digital Volume", WM5100_ADC_DIGITAL_VOLUME_4L, |
| WM5100_ADC_DIGITAL_VOLUME_4R, WM5100_IN4L_VOL_SHIFT, 191, |
| 0, digital_tlv), |
| |
| SOC_DOUBLE_R("IN1 Switch", WM5100_ADC_DIGITAL_VOLUME_1L, |
| WM5100_ADC_DIGITAL_VOLUME_1R, WM5100_IN1L_MUTE_SHIFT, 1, 1), |
| SOC_DOUBLE_R("IN2 Switch", WM5100_ADC_DIGITAL_VOLUME_2L, |
| WM5100_ADC_DIGITAL_VOLUME_2R, WM5100_IN2L_MUTE_SHIFT, 1, 1), |
| SOC_DOUBLE_R("IN3 Switch", WM5100_ADC_DIGITAL_VOLUME_3L, |
| WM5100_ADC_DIGITAL_VOLUME_3R, WM5100_IN3L_MUTE_SHIFT, 1, 1), |
| SOC_DOUBLE_R("IN4 Switch", WM5100_ADC_DIGITAL_VOLUME_4L, |
| WM5100_ADC_DIGITAL_VOLUME_4R, WM5100_IN4L_MUTE_SHIFT, 1, 1), |
| |
| SND_SOC_BYTES_MASK("EQ1 Coefficients", WM5100_EQ1_1, 20, WM5100_EQ1_ENA), |
| SND_SOC_BYTES_MASK("EQ2 Coefficients", WM5100_EQ2_1, 20, WM5100_EQ2_ENA), |
| SND_SOC_BYTES_MASK("EQ3 Coefficients", WM5100_EQ3_1, 20, WM5100_EQ3_ENA), |
| SND_SOC_BYTES_MASK("EQ4 Coefficients", WM5100_EQ4_1, 20, WM5100_EQ4_ENA), |
| |
| SND_SOC_BYTES_MASK("DRC Coefficients", WM5100_DRC1_CTRL1, 5, |
| WM5100_DRCL_ENA | WM5100_DRCR_ENA), |
| |
| SND_SOC_BYTES("LHPF1 Coefficients", WM5100_HPLPF1_2, 1), |
| SND_SOC_BYTES("LHPF2 Coefficients", WM5100_HPLPF2_2, 1), |
| SND_SOC_BYTES("LHPF3 Coefficients", WM5100_HPLPF3_2, 1), |
| SND_SOC_BYTES("LHPF4 Coefficients", WM5100_HPLPF4_2, 1), |
| |
| SOC_SINGLE("HPOUT1 High Performance Switch", WM5100_OUT_VOLUME_1L, |
| WM5100_OUT1_OSR_SHIFT, 1, 0), |
| SOC_SINGLE("HPOUT2 High Performance Switch", WM5100_OUT_VOLUME_2L, |
| WM5100_OUT2_OSR_SHIFT, 1, 0), |
| SOC_SINGLE("HPOUT3 High Performance Switch", WM5100_OUT_VOLUME_3L, |
| WM5100_OUT3_OSR_SHIFT, 1, 0), |
| SOC_SINGLE("SPKOUT High Performance Switch", WM5100_OUT_VOLUME_4L, |
| WM5100_OUT4_OSR_SHIFT, 1, 0), |
| SOC_SINGLE("SPKDAT1 High Performance Switch", WM5100_DAC_VOLUME_LIMIT_5L, |
| WM5100_OUT5_OSR_SHIFT, 1, 0), |
| SOC_SINGLE("SPKDAT2 High Performance Switch", WM5100_DAC_VOLUME_LIMIT_6L, |
| WM5100_OUT6_OSR_SHIFT, 1, 0), |
| |
| SOC_DOUBLE_R_TLV("HPOUT1 Digital Volume", WM5100_DAC_DIGITAL_VOLUME_1L, |
| WM5100_DAC_DIGITAL_VOLUME_1R, WM5100_OUT1L_VOL_SHIFT, 159, 0, |
| digital_tlv), |
| SOC_DOUBLE_R_TLV("HPOUT2 Digital Volume", WM5100_DAC_DIGITAL_VOLUME_2L, |
| WM5100_DAC_DIGITAL_VOLUME_2R, WM5100_OUT2L_VOL_SHIFT, 159, 0, |
| digital_tlv), |
| SOC_DOUBLE_R_TLV("HPOUT3 Digital Volume", WM5100_DAC_DIGITAL_VOLUME_3L, |
| WM5100_DAC_DIGITAL_VOLUME_3R, WM5100_OUT3L_VOL_SHIFT, 159, 0, |
| digital_tlv), |
| SOC_DOUBLE_R_TLV("SPKOUT Digital Volume", WM5100_DAC_DIGITAL_VOLUME_4L, |
| WM5100_DAC_DIGITAL_VOLUME_4R, WM5100_OUT4L_VOL_SHIFT, 159, 0, |
| digital_tlv), |
| SOC_DOUBLE_R_TLV("SPKDAT1 Digital Volume", WM5100_DAC_DIGITAL_VOLUME_5L, |
| WM5100_DAC_DIGITAL_VOLUME_5R, WM5100_OUT5L_VOL_SHIFT, 159, 0, |
| digital_tlv), |
| SOC_DOUBLE_R_TLV("SPKDAT2 Digital Volume", WM5100_DAC_DIGITAL_VOLUME_6L, |
| WM5100_DAC_DIGITAL_VOLUME_6R, WM5100_OUT6L_VOL_SHIFT, 159, 0, |
| digital_tlv), |
| |
| SOC_DOUBLE_R("HPOUT1 Digital Switch", WM5100_DAC_DIGITAL_VOLUME_1L, |
| WM5100_DAC_DIGITAL_VOLUME_1R, WM5100_OUT1L_MUTE_SHIFT, 1, 1), |
| SOC_DOUBLE_R("HPOUT2 Digital Switch", WM5100_DAC_DIGITAL_VOLUME_2L, |
| WM5100_DAC_DIGITAL_VOLUME_2R, WM5100_OUT2L_MUTE_SHIFT, 1, 1), |
| SOC_DOUBLE_R("HPOUT3 Digital Switch", WM5100_DAC_DIGITAL_VOLUME_3L, |
| WM5100_DAC_DIGITAL_VOLUME_3R, WM5100_OUT3L_MUTE_SHIFT, 1, 1), |
| SOC_DOUBLE_R("SPKOUT Digital Switch", WM5100_DAC_DIGITAL_VOLUME_4L, |
| WM5100_DAC_DIGITAL_VOLUME_4R, WM5100_OUT4L_MUTE_SHIFT, 1, 1), |
| SOC_DOUBLE_R("SPKDAT1 Digital Switch", WM5100_DAC_DIGITAL_VOLUME_5L, |
| WM5100_DAC_DIGITAL_VOLUME_5R, WM5100_OUT5L_MUTE_SHIFT, 1, 1), |
| SOC_DOUBLE_R("SPKDAT2 Digital Switch", WM5100_DAC_DIGITAL_VOLUME_6L, |
| WM5100_DAC_DIGITAL_VOLUME_6R, WM5100_OUT6L_MUTE_SHIFT, 1, 1), |
| |
| /* FIXME: Only valid from -12dB to 0dB (52-64) */ |
| SOC_DOUBLE_R_TLV("HPOUT1 Volume", WM5100_OUT_VOLUME_1L, WM5100_OUT_VOLUME_1R, |
| WM5100_OUT1L_PGA_VOL_SHIFT, 64, 0, out_tlv), |
| SOC_DOUBLE_R_TLV("HPOUT2 Volume", WM5100_OUT_VOLUME_2L, WM5100_OUT_VOLUME_2R, |
| WM5100_OUT2L_PGA_VOL_SHIFT, 64, 0, out_tlv), |
| SOC_DOUBLE_R_TLV("HPOUT3 Volume", WM5100_OUT_VOLUME_3L, WM5100_OUT_VOLUME_3R, |
| WM5100_OUT2L_PGA_VOL_SHIFT, 64, 0, out_tlv), |
| |
| SOC_DOUBLE("SPKDAT1 Switch", WM5100_PDM_SPK1_CTRL_1, WM5100_SPK1L_MUTE_SHIFT, |
| WM5100_SPK1R_MUTE_SHIFT, 1, 1), |
| SOC_DOUBLE("SPKDAT2 Switch", WM5100_PDM_SPK2_CTRL_1, WM5100_SPK2L_MUTE_SHIFT, |
| WM5100_SPK2R_MUTE_SHIFT, 1, 1), |
| |
| SOC_SINGLE_TLV("EQ1 Band 1 Volume", WM5100_EQ1_1, WM5100_EQ1_B1_GAIN_SHIFT, |
| 24, 0, eq_tlv), |
| SOC_SINGLE_TLV("EQ1 Band 2 Volume", WM5100_EQ1_1, WM5100_EQ1_B2_GAIN_SHIFT, |
| 24, 0, eq_tlv), |
| SOC_SINGLE_TLV("EQ1 Band 3 Volume", WM5100_EQ1_1, WM5100_EQ1_B3_GAIN_SHIFT, |
| 24, 0, eq_tlv), |
| SOC_SINGLE_TLV("EQ1 Band 4 Volume", WM5100_EQ1_2, WM5100_EQ1_B4_GAIN_SHIFT, |
| 24, 0, eq_tlv), |
| SOC_SINGLE_TLV("EQ1 Band 5 Volume", WM5100_EQ1_2, WM5100_EQ1_B5_GAIN_SHIFT, |
| 24, 0, eq_tlv), |
| |
| SOC_SINGLE_TLV("EQ2 Band 1 Volume", WM5100_EQ2_1, WM5100_EQ2_B1_GAIN_SHIFT, |
| 24, 0, eq_tlv), |
| SOC_SINGLE_TLV("EQ2 Band 2 Volume", WM5100_EQ2_1, WM5100_EQ2_B2_GAIN_SHIFT, |
| 24, 0, eq_tlv), |
| SOC_SINGLE_TLV("EQ2 Band 3 Volume", WM5100_EQ2_1, WM5100_EQ2_B3_GAIN_SHIFT, |
| 24, 0, eq_tlv), |
| SOC_SINGLE_TLV("EQ2 Band 4 Volume", WM5100_EQ2_2, WM5100_EQ2_B4_GAIN_SHIFT, |
| 24, 0, eq_tlv), |
| SOC_SINGLE_TLV("EQ2 Band 5 Volume", WM5100_EQ2_2, WM5100_EQ2_B5_GAIN_SHIFT, |
| 24, 0, eq_tlv), |
| |
| SOC_SINGLE_TLV("EQ3 Band 1 Volume", WM5100_EQ1_1, WM5100_EQ3_B1_GAIN_SHIFT, |
| 24, 0, eq_tlv), |
| SOC_SINGLE_TLV("EQ3 Band 2 Volume", WM5100_EQ3_1, WM5100_EQ3_B2_GAIN_SHIFT, |
| 24, 0, eq_tlv), |
| SOC_SINGLE_TLV("EQ3 Band 3 Volume", WM5100_EQ3_1, WM5100_EQ3_B3_GAIN_SHIFT, |
| 24, 0, eq_tlv), |
| SOC_SINGLE_TLV("EQ3 Band 4 Volume", WM5100_EQ3_2, WM5100_EQ3_B4_GAIN_SHIFT, |
| 24, 0, eq_tlv), |
| SOC_SINGLE_TLV("EQ3 Band 5 Volume", WM5100_EQ3_2, WM5100_EQ3_B5_GAIN_SHIFT, |
| 24, 0, eq_tlv), |
| |
| SOC_SINGLE_TLV("EQ4 Band 1 Volume", WM5100_EQ4_1, WM5100_EQ4_B1_GAIN_SHIFT, |
| 24, 0, eq_tlv), |
| SOC_SINGLE_TLV("EQ4 Band 2 Volume", WM5100_EQ4_1, WM5100_EQ4_B2_GAIN_SHIFT, |
| 24, 0, eq_tlv), |
| SOC_SINGLE_TLV("EQ4 Band 3 Volume", WM5100_EQ4_1, WM5100_EQ4_B3_GAIN_SHIFT, |
| 24, 0, eq_tlv), |
| SOC_SINGLE_TLV("EQ4 Band 4 Volume", WM5100_EQ4_2, WM5100_EQ4_B4_GAIN_SHIFT, |
| 24, 0, eq_tlv), |
| SOC_SINGLE_TLV("EQ4 Band 5 Volume", WM5100_EQ4_2, WM5100_EQ4_B5_GAIN_SHIFT, |
| 24, 0, eq_tlv), |
| |
| SOC_ENUM("LHPF1 Mode", wm5100_lhpf1_mode), |
| SOC_ENUM("LHPF2 Mode", wm5100_lhpf2_mode), |
| SOC_ENUM("LHPF3 Mode", wm5100_lhpf3_mode), |
| SOC_ENUM("LHPF4 Mode", wm5100_lhpf4_mode), |
| |
| WM5100_MIXER_CONTROLS("HPOUT1L", WM5100_OUT1LMIX_INPUT_1_SOURCE), |
| WM5100_MIXER_CONTROLS("HPOUT1R", WM5100_OUT1RMIX_INPUT_1_SOURCE), |
| WM5100_MIXER_CONTROLS("HPOUT2L", WM5100_OUT2LMIX_INPUT_1_SOURCE), |
| WM5100_MIXER_CONTROLS("HPOUT2R", WM5100_OUT2RMIX_INPUT_1_SOURCE), |
| WM5100_MIXER_CONTROLS("HPOUT3L", WM5100_OUT3LMIX_INPUT_1_SOURCE), |
| WM5100_MIXER_CONTROLS("HPOUT3R", WM5100_OUT3RMIX_INPUT_1_SOURCE), |
| |
| WM5100_MIXER_CONTROLS("SPKOUTL", WM5100_OUT4LMIX_INPUT_1_SOURCE), |
| WM5100_MIXER_CONTROLS("SPKOUTR", WM5100_OUT4RMIX_INPUT_1_SOURCE), |
| WM5100_MIXER_CONTROLS("SPKDAT1L", WM5100_OUT5LMIX_INPUT_1_SOURCE), |
| WM5100_MIXER_CONTROLS("SPKDAT1R", WM5100_OUT5RMIX_INPUT_1_SOURCE), |
| WM5100_MIXER_CONTROLS("SPKDAT2L", WM5100_OUT6LMIX_INPUT_1_SOURCE), |
| WM5100_MIXER_CONTROLS("SPKDAT2R", WM5100_OUT6RMIX_INPUT_1_SOURCE), |
| |
| WM5100_MIXER_CONTROLS("PWM1", WM5100_PWM1MIX_INPUT_1_SOURCE), |
| WM5100_MIXER_CONTROLS("PWM2", WM5100_PWM2MIX_INPUT_1_SOURCE), |
| |
| WM5100_MIXER_CONTROLS("AIF1TX1", WM5100_AIF1TX1MIX_INPUT_1_SOURCE), |
| WM5100_MIXER_CONTROLS("AIF1TX2", WM5100_AIF1TX2MIX_INPUT_1_SOURCE), |
| WM5100_MIXER_CONTROLS("AIF1TX3", WM5100_AIF1TX3MIX_INPUT_1_SOURCE), |
| WM5100_MIXER_CONTROLS("AIF1TX4", WM5100_AIF1TX4MIX_INPUT_1_SOURCE), |
| WM5100_MIXER_CONTROLS("AIF1TX5", WM5100_AIF1TX5MIX_INPUT_1_SOURCE), |
| WM5100_MIXER_CONTROLS("AIF1TX6", WM5100_AIF1TX6MIX_INPUT_1_SOURCE), |
| WM5100_MIXER_CONTROLS("AIF1TX7", WM5100_AIF1TX7MIX_INPUT_1_SOURCE), |
| WM5100_MIXER_CONTROLS("AIF1TX8", WM5100_AIF1TX8MIX_INPUT_1_SOURCE), |
| |
| WM5100_MIXER_CONTROLS("AIF2TX1", WM5100_AIF2TX1MIX_INPUT_1_SOURCE), |
| WM5100_MIXER_CONTROLS("AIF2TX2", WM5100_AIF2TX2MIX_INPUT_1_SOURCE), |
| |
| WM5100_MIXER_CONTROLS("AIF3TX1", WM5100_AIF3TX1MIX_INPUT_1_SOURCE), |
| WM5100_MIXER_CONTROLS("AIF3TX2", WM5100_AIF3TX2MIX_INPUT_1_SOURCE), |
| |
| WM5100_MIXER_CONTROLS("EQ1", WM5100_EQ1MIX_INPUT_1_SOURCE), |
| WM5100_MIXER_CONTROLS("EQ2", WM5100_EQ2MIX_INPUT_1_SOURCE), |
| WM5100_MIXER_CONTROLS("EQ3", WM5100_EQ3MIX_INPUT_1_SOURCE), |
| WM5100_MIXER_CONTROLS("EQ4", WM5100_EQ4MIX_INPUT_1_SOURCE), |
| |
| WM5100_MIXER_CONTROLS("DRC1L", WM5100_DRC1LMIX_INPUT_1_SOURCE), |
| WM5100_MIXER_CONTROLS("DRC1R", WM5100_DRC1RMIX_INPUT_1_SOURCE), |
| SND_SOC_BYTES_MASK("DRC", WM5100_DRC1_CTRL1, 5, |
| WM5100_DRCL_ENA | WM5100_DRCR_ENA), |
| |
| WM5100_MIXER_CONTROLS("LHPF1", WM5100_HPLP1MIX_INPUT_1_SOURCE), |
| WM5100_MIXER_CONTROLS("LHPF2", WM5100_HPLP2MIX_INPUT_1_SOURCE), |
| WM5100_MIXER_CONTROLS("LHPF3", WM5100_HPLP3MIX_INPUT_1_SOURCE), |
| WM5100_MIXER_CONTROLS("LHPF4", WM5100_HPLP4MIX_INPUT_1_SOURCE), |
| }; |
| |
| static void wm5100_seq_notifier(struct snd_soc_component *component, |
| enum snd_soc_dapm_type event, int subseq) |
| { |
| struct wm5100_priv *wm5100 = snd_soc_component_get_drvdata(component); |
| u16 val, expect, i; |
| |
| /* Wait for the outputs to flag themselves as enabled */ |
| if (wm5100->out_ena[0]) { |
| expect = snd_soc_component_read(component, WM5100_CHANNEL_ENABLES_1); |
| for (i = 0; i < 200; i++) { |
| val = snd_soc_component_read(component, WM5100_OUTPUT_STATUS_1); |
| if (val == expect) { |
| wm5100->out_ena[0] = false; |
| break; |
| } |
| } |
| if (i == 200) { |
| dev_err(component->dev, "Timeout waiting for OUTPUT1 %x\n", |
| expect); |
| } |
| } |
| |
| if (wm5100->out_ena[1]) { |
| expect = snd_soc_component_read(component, WM5100_OUTPUT_ENABLES_2); |
| for (i = 0; i < 200; i++) { |
| val = snd_soc_component_read(component, WM5100_OUTPUT_STATUS_2); |
| if (val == expect) { |
| wm5100->out_ena[1] = false; |
| break; |
| } |
| } |
| if (i == 200) { |
| dev_err(component->dev, "Timeout waiting for OUTPUT2 %x\n", |
| expect); |
| } |
| } |
| } |
| |
| static int wm5100_out_ev(struct snd_soc_dapm_widget *w, |
| struct snd_kcontrol *kcontrol, |
| int event) |
| { |
| struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); |
| struct wm5100_priv *wm5100 = snd_soc_component_get_drvdata(component); |
| |
| switch (w->reg) { |
| case WM5100_CHANNEL_ENABLES_1: |
| wm5100->out_ena[0] = true; |
| break; |
| case WM5100_OUTPUT_ENABLES_2: |
| wm5100->out_ena[0] = true; |
| break; |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static void wm5100_log_status3(struct wm5100_priv *wm5100, int val) |
| { |
| if (val & WM5100_SPK_SHUTDOWN_WARN_EINT) |
| dev_crit(wm5100->dev, "Speaker shutdown warning\n"); |
| if (val & WM5100_SPK_SHUTDOWN_EINT) |
| dev_crit(wm5100->dev, "Speaker shutdown\n"); |
| if (val & WM5100_CLKGEN_ERR_EINT) |
| dev_crit(wm5100->dev, "SYSCLK underclocked\n"); |
| if (val & WM5100_CLKGEN_ERR_ASYNC_EINT) |
| dev_crit(wm5100->dev, "ASYNCCLK underclocked\n"); |
| } |
| |
| static void wm5100_log_status4(struct wm5100_priv *wm5100, int val) |
| { |
| if (val & WM5100_AIF3_ERR_EINT) |
| dev_err(wm5100->dev, "AIF3 configuration error\n"); |
| if (val & WM5100_AIF2_ERR_EINT) |
| dev_err(wm5100->dev, "AIF2 configuration error\n"); |
| if (val & WM5100_AIF1_ERR_EINT) |
| dev_err(wm5100->dev, "AIF1 configuration error\n"); |
| if (val & WM5100_CTRLIF_ERR_EINT) |
| dev_err(wm5100->dev, "Control interface error\n"); |
| if (val & WM5100_ISRC2_UNDERCLOCKED_EINT) |
| dev_err(wm5100->dev, "ISRC2 underclocked\n"); |
| if (val & WM5100_ISRC1_UNDERCLOCKED_EINT) |
| dev_err(wm5100->dev, "ISRC1 underclocked\n"); |
| if (val & WM5100_FX_UNDERCLOCKED_EINT) |
| dev_err(wm5100->dev, "FX underclocked\n"); |
| if (val & WM5100_AIF3_UNDERCLOCKED_EINT) |
| dev_err(wm5100->dev, "AIF3 underclocked\n"); |
| if (val & WM5100_AIF2_UNDERCLOCKED_EINT) |
| dev_err(wm5100->dev, "AIF2 underclocked\n"); |
| if (val & WM5100_AIF1_UNDERCLOCKED_EINT) |
| dev_err(wm5100->dev, "AIF1 underclocked\n"); |
| if (val & WM5100_ASRC_UNDERCLOCKED_EINT) |
| dev_err(wm5100->dev, "ASRC underclocked\n"); |
| if (val & WM5100_DAC_UNDERCLOCKED_EINT) |
| dev_err(wm5100->dev, "DAC underclocked\n"); |
| if (val & WM5100_ADC_UNDERCLOCKED_EINT) |
| dev_err(wm5100->dev, "ADC underclocked\n"); |
| if (val & WM5100_MIXER_UNDERCLOCKED_EINT) |
| dev_err(wm5100->dev, "Mixer underclocked\n"); |
| } |
| |
| static int wm5100_post_ev(struct snd_soc_dapm_widget *w, |
| struct snd_kcontrol *kcontrol, |
| int event) |
| { |
| struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); |
| struct wm5100_priv *wm5100 = snd_soc_component_get_drvdata(component); |
| int ret; |
| |
| ret = snd_soc_component_read(component, WM5100_INTERRUPT_RAW_STATUS_3); |
| ret &= WM5100_SPK_SHUTDOWN_WARN_STS | |
| WM5100_SPK_SHUTDOWN_STS | WM5100_CLKGEN_ERR_STS | |
| WM5100_CLKGEN_ERR_ASYNC_STS; |
| wm5100_log_status3(wm5100, ret); |
| |
| ret = snd_soc_component_read(component, WM5100_INTERRUPT_RAW_STATUS_4); |
| wm5100_log_status4(wm5100, ret); |
| |
| return 0; |
| } |
| |
| static const struct snd_soc_dapm_widget wm5100_dapm_widgets[] = { |
| SND_SOC_DAPM_SUPPLY("SYSCLK", WM5100_CLOCKING_3, WM5100_SYSCLK_ENA_SHIFT, 0, |
| NULL, 0), |
| SND_SOC_DAPM_SUPPLY("ASYNCCLK", WM5100_CLOCKING_6, WM5100_ASYNC_CLK_ENA_SHIFT, |
| 0, NULL, 0), |
| |
| SND_SOC_DAPM_REGULATOR_SUPPLY("CPVDD", 20, 0), |
| SND_SOC_DAPM_REGULATOR_SUPPLY("DBVDD2", 0, 0), |
| SND_SOC_DAPM_REGULATOR_SUPPLY("DBVDD3", 0, 0), |
| |
| SND_SOC_DAPM_SUPPLY("CP1", WM5100_HP_CHARGE_PUMP_1, WM5100_CP1_ENA_SHIFT, 0, |
| NULL, 0), |
| SND_SOC_DAPM_SUPPLY("CP2", WM5100_MIC_CHARGE_PUMP_1, WM5100_CP2_ENA_SHIFT, 0, |
| NULL, 0), |
| SND_SOC_DAPM_SUPPLY("CP2 Active", WM5100_MIC_CHARGE_PUMP_1, |
| WM5100_CP2_BYPASS_SHIFT, 1, NULL, 0), |
| |
| SND_SOC_DAPM_SUPPLY("MICBIAS1", WM5100_MIC_BIAS_CTRL_1, WM5100_MICB1_ENA_SHIFT, |
| 0, NULL, 0), |
| SND_SOC_DAPM_SUPPLY("MICBIAS2", WM5100_MIC_BIAS_CTRL_2, WM5100_MICB2_ENA_SHIFT, |
| 0, NULL, 0), |
| SND_SOC_DAPM_SUPPLY("MICBIAS3", WM5100_MIC_BIAS_CTRL_3, WM5100_MICB3_ENA_SHIFT, |
| 0, NULL, 0), |
| |
| SND_SOC_DAPM_INPUT("IN1L"), |
| SND_SOC_DAPM_INPUT("IN1R"), |
| SND_SOC_DAPM_INPUT("IN2L"), |
| SND_SOC_DAPM_INPUT("IN2R"), |
| SND_SOC_DAPM_INPUT("IN3L"), |
| SND_SOC_DAPM_INPUT("IN3R"), |
| SND_SOC_DAPM_INPUT("IN4L"), |
| SND_SOC_DAPM_INPUT("IN4R"), |
| SND_SOC_DAPM_SIGGEN("TONE"), |
| |
| SND_SOC_DAPM_PGA_E("IN1L PGA", WM5100_INPUT_ENABLES, WM5100_IN1L_ENA_SHIFT, 0, |
| NULL, 0, wm5100_out_ev, SND_SOC_DAPM_POST_PMU), |
| SND_SOC_DAPM_PGA_E("IN1R PGA", WM5100_INPUT_ENABLES, WM5100_IN1R_ENA_SHIFT, 0, |
| NULL, 0, wm5100_out_ev, SND_SOC_DAPM_POST_PMU), |
| SND_SOC_DAPM_PGA_E("IN2L PGA", WM5100_INPUT_ENABLES, WM5100_IN2L_ENA_SHIFT, 0, |
| NULL, 0, wm5100_out_ev, SND_SOC_DAPM_POST_PMU), |
| SND_SOC_DAPM_PGA_E("IN2R PGA", WM5100_INPUT_ENABLES, WM5100_IN2R_ENA_SHIFT, 0, |
| NULL, 0, wm5100_out_ev, SND_SOC_DAPM_POST_PMU), |
| SND_SOC_DAPM_PGA_E("IN3L PGA", WM5100_INPUT_ENABLES, WM5100_IN3L_ENA_SHIFT, 0, |
| NULL, 0, wm5100_out_ev, SND_SOC_DAPM_POST_PMU), |
| SND_SOC_DAPM_PGA_E("IN3R PGA", WM5100_INPUT_ENABLES, WM5100_IN3R_ENA_SHIFT, 0, |
| NULL, 0, wm5100_out_ev, SND_SOC_DAPM_POST_PMU), |
| SND_SOC_DAPM_PGA_E("IN4L PGA", WM5100_INPUT_ENABLES, WM5100_IN4L_ENA_SHIFT, 0, |
| NULL, 0, wm5100_out_ev, SND_SOC_DAPM_POST_PMU), |
| SND_SOC_DAPM_PGA_E("IN4R PGA", WM5100_INPUT_ENABLES, WM5100_IN4R_ENA_SHIFT, 0, |
| NULL, 0, wm5100_out_ev, SND_SOC_DAPM_POST_PMU), |
| |
| SND_SOC_DAPM_PGA("Tone Generator 1", WM5100_TONE_GENERATOR_1, |
| WM5100_TONE1_ENA_SHIFT, 0, NULL, 0), |
| SND_SOC_DAPM_PGA("Tone Generator 2", WM5100_TONE_GENERATOR_1, |
| WM5100_TONE2_ENA_SHIFT, 0, NULL, 0), |
| |
| SND_SOC_DAPM_AIF_IN("AIF1RX1", "AIF1 Playback", 0, |
| WM5100_AUDIO_IF_1_27, WM5100_AIF1RX1_ENA_SHIFT, 0), |
| SND_SOC_DAPM_AIF_IN("AIF1RX2", "AIF1 Playback", 1, |
| WM5100_AUDIO_IF_1_27, WM5100_AIF1RX2_ENA_SHIFT, 0), |
| SND_SOC_DAPM_AIF_IN("AIF1RX3", "AIF1 Playback", 2, |
| WM5100_AUDIO_IF_1_27, WM5100_AIF1RX3_ENA_SHIFT, 0), |
| SND_SOC_DAPM_AIF_IN("AIF1RX4", "AIF1 Playback", 3, |
| WM5100_AUDIO_IF_1_27, WM5100_AIF1RX4_ENA_SHIFT, 0), |
| SND_SOC_DAPM_AIF_IN("AIF1RX5", "AIF1 Playback", 4, |
| WM5100_AUDIO_IF_1_27, WM5100_AIF1RX5_ENA_SHIFT, 0), |
| SND_SOC_DAPM_AIF_IN("AIF1RX6", "AIF1 Playback", 5, |
| WM5100_AUDIO_IF_1_27, WM5100_AIF1RX6_ENA_SHIFT, 0), |
| SND_SOC_DAPM_AIF_IN("AIF1RX7", "AIF1 Playback", 6, |
| WM5100_AUDIO_IF_1_27, WM5100_AIF1RX7_ENA_SHIFT, 0), |
| SND_SOC_DAPM_AIF_IN("AIF1RX8", "AIF1 Playback", 7, |
| WM5100_AUDIO_IF_1_27, WM5100_AIF1RX8_ENA_SHIFT, 0), |
| |
| SND_SOC_DAPM_AIF_IN("AIF2RX1", "AIF2 Playback", 0, |
| WM5100_AUDIO_IF_2_27, WM5100_AIF2RX1_ENA_SHIFT, 0), |
| SND_SOC_DAPM_AIF_IN("AIF2RX2", "AIF2 Playback", 1, |
| WM5100_AUDIO_IF_2_27, WM5100_AIF2RX2_ENA_SHIFT, 0), |
| |
| SND_SOC_DAPM_AIF_IN("AIF3RX1", "AIF3 Playback", 0, |
| WM5100_AUDIO_IF_3_27, WM5100_AIF3RX1_ENA_SHIFT, 0), |
| SND_SOC_DAPM_AIF_IN("AIF3RX2", "AIF3 Playback", 1, |
| WM5100_AUDIO_IF_3_27, WM5100_AIF3RX2_ENA_SHIFT, 0), |
| |
| SND_SOC_DAPM_AIF_OUT("AIF1TX1", "AIF1 Capture", 0, |
| WM5100_AUDIO_IF_1_26, WM5100_AIF1TX1_ENA_SHIFT, 0), |
| SND_SOC_DAPM_AIF_OUT("AIF1TX2", "AIF1 Capture", 1, |
| WM5100_AUDIO_IF_1_26, WM5100_AIF1TX2_ENA_SHIFT, 0), |
| SND_SOC_DAPM_AIF_OUT("AIF1TX3", "AIF1 Capture", 2, |
| WM5100_AUDIO_IF_1_26, WM5100_AIF1TX3_ENA_SHIFT, 0), |
| SND_SOC_DAPM_AIF_OUT("AIF1TX4", "AIF1 Capture", 3, |
| WM5100_AUDIO_IF_1_26, WM5100_AIF1TX4_ENA_SHIFT, 0), |
| SND_SOC_DAPM_AIF_OUT("AIF1TX5", "AIF1 Capture", 4, |
| WM5100_AUDIO_IF_1_26, WM5100_AIF1TX5_ENA_SHIFT, 0), |
| SND_SOC_DAPM_AIF_OUT("AIF1TX6", "AIF1 Capture", 5, |
| WM5100_AUDIO_IF_1_26, WM5100_AIF1TX6_ENA_SHIFT, 0), |
| SND_SOC_DAPM_AIF_OUT("AIF1TX7", "AIF1 Capture", 6, |
| WM5100_AUDIO_IF_1_26, WM5100_AIF1TX7_ENA_SHIFT, 0), |
| SND_SOC_DAPM_AIF_OUT("AIF1TX8", "AIF1 Capture", 7, |
| WM5100_AUDIO_IF_1_26, WM5100_AIF1TX8_ENA_SHIFT, 0), |
| |
| SND_SOC_DAPM_AIF_OUT("AIF2TX1", "AIF2 Capture", 0, |
| WM5100_AUDIO_IF_2_26, WM5100_AIF2TX1_ENA_SHIFT, 0), |
| SND_SOC_DAPM_AIF_OUT("AIF2TX2", "AIF2 Capture", 1, |
| WM5100_AUDIO_IF_2_26, WM5100_AIF2TX2_ENA_SHIFT, 0), |
| |
| SND_SOC_DAPM_AIF_OUT("AIF3TX1", "AIF3 Capture", 0, |
| WM5100_AUDIO_IF_3_26, WM5100_AIF3TX1_ENA_SHIFT, 0), |
| SND_SOC_DAPM_AIF_OUT("AIF3TX2", "AIF3 Capture", 1, |
| WM5100_AUDIO_IF_3_26, WM5100_AIF3TX2_ENA_SHIFT, 0), |
| |
| SND_SOC_DAPM_PGA_E("OUT6L", WM5100_OUTPUT_ENABLES_2, WM5100_OUT6L_ENA_SHIFT, 0, |
| NULL, 0, wm5100_out_ev, SND_SOC_DAPM_POST_PMU), |
| SND_SOC_DAPM_PGA_E("OUT6R", WM5100_OUTPUT_ENABLES_2, WM5100_OUT6R_ENA_SHIFT, 0, |
| NULL, 0, wm5100_out_ev, SND_SOC_DAPM_POST_PMU), |
| SND_SOC_DAPM_PGA_E("OUT5L", WM5100_OUTPUT_ENABLES_2, WM5100_OUT5L_ENA_SHIFT, 0, |
| NULL, 0, wm5100_out_ev, SND_SOC_DAPM_POST_PMU), |
| SND_SOC_DAPM_PGA_E("OUT5R", WM5100_OUTPUT_ENABLES_2, WM5100_OUT5R_ENA_SHIFT, 0, |
| NULL, 0, wm5100_out_ev, SND_SOC_DAPM_POST_PMU), |
| SND_SOC_DAPM_PGA_E("OUT4L", WM5100_OUTPUT_ENABLES_2, WM5100_OUT4L_ENA_SHIFT, 0, |
| NULL, 0, wm5100_out_ev, SND_SOC_DAPM_POST_PMU), |
| SND_SOC_DAPM_PGA_E("OUT4R", WM5100_OUTPUT_ENABLES_2, WM5100_OUT4R_ENA_SHIFT, 0, |
| NULL, 0, wm5100_out_ev, SND_SOC_DAPM_POST_PMU), |
| SND_SOC_DAPM_PGA_E("OUT3L", WM5100_CHANNEL_ENABLES_1, WM5100_HP3L_ENA_SHIFT, 0, |
| NULL, 0, wm5100_out_ev, SND_SOC_DAPM_POST_PMU), |
| SND_SOC_DAPM_PGA_E("OUT3R", WM5100_CHANNEL_ENABLES_1, WM5100_HP3R_ENA_SHIFT, 0, |
| NULL, 0, wm5100_out_ev, SND_SOC_DAPM_POST_PMU), |
| SND_SOC_DAPM_PGA_E("OUT2L", WM5100_CHANNEL_ENABLES_1, WM5100_HP2L_ENA_SHIFT, 0, |
| NULL, 0, wm5100_out_ev, SND_SOC_DAPM_POST_PMU), |
| SND_SOC_DAPM_PGA_E("OUT2R", WM5100_CHANNEL_ENABLES_1, WM5100_HP2R_ENA_SHIFT, 0, |
| NULL, 0, wm5100_out_ev, SND_SOC_DAPM_POST_PMU), |
| SND_SOC_DAPM_PGA_E("OUT1L", WM5100_CHANNEL_ENABLES_1, WM5100_HP1L_ENA_SHIFT, 0, |
| NULL, 0, wm5100_out_ev, SND_SOC_DAPM_POST_PMU), |
| SND_SOC_DAPM_PGA_E("OUT1R", WM5100_CHANNEL_ENABLES_1, WM5100_HP1R_ENA_SHIFT, 0, |
| NULL, 0, wm5100_out_ev, SND_SOC_DAPM_POST_PMU), |
| SND_SOC_DAPM_PGA_E("PWM1 Driver", WM5100_PWM_DRIVE_1, WM5100_PWM1_ENA_SHIFT, 0, |
| NULL, 0, wm5100_out_ev, SND_SOC_DAPM_POST_PMU), |
| SND_SOC_DAPM_PGA_E("PWM2 Driver", WM5100_PWM_DRIVE_1, WM5100_PWM2_ENA_SHIFT, 0, |
| NULL, 0, wm5100_out_ev, SND_SOC_DAPM_POST_PMU), |
| |
| SND_SOC_DAPM_PGA("EQ1", WM5100_EQ1_1, WM5100_EQ1_ENA_SHIFT, 0, NULL, 0), |
| SND_SOC_DAPM_PGA("EQ2", WM5100_EQ2_1, WM5100_EQ2_ENA_SHIFT, 0, NULL, 0), |
| SND_SOC_DAPM_PGA("EQ3", WM5100_EQ3_1, WM5100_EQ3_ENA_SHIFT, 0, NULL, 0), |
| SND_SOC_DAPM_PGA("EQ4", WM5100_EQ4_1, WM5100_EQ4_ENA_SHIFT, 0, NULL, 0), |
| |
| SND_SOC_DAPM_PGA("DRC1L", WM5100_DRC1_CTRL1, WM5100_DRCL_ENA_SHIFT, 0, |
| NULL, 0), |
| SND_SOC_DAPM_PGA("DRC1R", WM5100_DRC1_CTRL1, WM5100_DRCR_ENA_SHIFT, 0, |
| NULL, 0), |
| |
| SND_SOC_DAPM_PGA("LHPF1", WM5100_HPLPF1_1, WM5100_LHPF1_ENA_SHIFT, 0, |
| NULL, 0), |
| SND_SOC_DAPM_PGA("LHPF2", WM5100_HPLPF2_1, WM5100_LHPF2_ENA_SHIFT, 0, |
| NULL, 0), |
| SND_SOC_DAPM_PGA("LHPF3", WM5100_HPLPF3_1, WM5100_LHPF3_ENA_SHIFT, 0, |
| NULL, 0), |
| SND_SOC_DAPM_PGA("LHPF4", WM5100_HPLPF4_1, WM5100_LHPF4_ENA_SHIFT, 0, |
| NULL, 0), |
| |
| WM5100_MIXER_WIDGETS(EQ1, "EQ1"), |
| WM5100_MIXER_WIDGETS(EQ2, "EQ2"), |
| WM5100_MIXER_WIDGETS(EQ3, "EQ3"), |
| WM5100_MIXER_WIDGETS(EQ4, "EQ4"), |
| |
| WM5100_MIXER_WIDGETS(DRC1L, "DRC1L"), |
| WM5100_MIXER_WIDGETS(DRC1R, "DRC1R"), |
| |
| WM5100_MIXER_WIDGETS(LHPF1, "LHPF1"), |
| WM5100_MIXER_WIDGETS(LHPF2, "LHPF2"), |
| WM5100_MIXER_WIDGETS(LHPF3, "LHPF3"), |
| WM5100_MIXER_WIDGETS(LHPF4, "LHPF4"), |
| |
| WM5100_MIXER_WIDGETS(AIF1TX1, "AIF1TX1"), |
| WM5100_MIXER_WIDGETS(AIF1TX2, "AIF1TX2"), |
| WM5100_MIXER_WIDGETS(AIF1TX3, "AIF1TX3"), |
| WM5100_MIXER_WIDGETS(AIF1TX4, "AIF1TX4"), |
| WM5100_MIXER_WIDGETS(AIF1TX5, "AIF1TX5"), |
| WM5100_MIXER_WIDGETS(AIF1TX6, "AIF1TX6"), |
| WM5100_MIXER_WIDGETS(AIF1TX7, "AIF1TX7"), |
| WM5100_MIXER_WIDGETS(AIF1TX8, "AIF1TX8"), |
| |
| WM5100_MIXER_WIDGETS(AIF2TX1, "AIF2TX1"), |
| WM5100_MIXER_WIDGETS(AIF2TX2, "AIF2TX2"), |
| |
| WM5100_MIXER_WIDGETS(AIF3TX1, "AIF3TX1"), |
| WM5100_MIXER_WIDGETS(AIF3TX2, "AIF3TX2"), |
| |
| WM5100_MIXER_WIDGETS(HPOUT1L, "HPOUT1L"), |
| WM5100_MIXER_WIDGETS(HPOUT1R, "HPOUT1R"), |
| WM5100_MIXER_WIDGETS(HPOUT2L, "HPOUT2L"), |
| WM5100_MIXER_WIDGETS(HPOUT2R, "HPOUT2R"), |
| WM5100_MIXER_WIDGETS(HPOUT3L, "HPOUT3L"), |
| WM5100_MIXER_WIDGETS(HPOUT3R, "HPOUT3R"), |
| |
| WM5100_MIXER_WIDGETS(SPKOUTL, "SPKOUTL"), |
| WM5100_MIXER_WIDGETS(SPKOUTR, "SPKOUTR"), |
| WM5100_MIXER_WIDGETS(SPKDAT1L, "SPKDAT1L"), |
| WM5100_MIXER_WIDGETS(SPKDAT1R, "SPKDAT1R"), |
| WM5100_MIXER_WIDGETS(SPKDAT2L, "SPKDAT2L"), |
| WM5100_MIXER_WIDGETS(SPKDAT2R, "SPKDAT2R"), |
| |
| WM5100_MIXER_WIDGETS(PWM1, "PWM1"), |
| WM5100_MIXER_WIDGETS(PWM2, "PWM2"), |
| |
| SND_SOC_DAPM_OUTPUT("HPOUT1L"), |
| SND_SOC_DAPM_OUTPUT("HPOUT1R"), |
| SND_SOC_DAPM_OUTPUT("HPOUT2L"), |
| SND_SOC_DAPM_OUTPUT("HPOUT2R"), |
| SND_SOC_DAPM_OUTPUT("HPOUT3L"), |
| SND_SOC_DAPM_OUTPUT("HPOUT3R"), |
| SND_SOC_DAPM_OUTPUT("SPKOUTL"), |
| SND_SOC_DAPM_OUTPUT("SPKOUTR"), |
| SND_SOC_DAPM_OUTPUT("SPKDAT1"), |
| SND_SOC_DAPM_OUTPUT("SPKDAT2"), |
| SND_SOC_DAPM_OUTPUT("PWM1"), |
| SND_SOC_DAPM_OUTPUT("PWM2"), |
| }; |
| |
| /* We register a _POST event if we don't have IRQ support so we can |
| * look at the error status from the CODEC - if we've got the IRQ |
| * hooked up then we will get prompted to look by an interrupt. |
| */ |
| static const struct snd_soc_dapm_widget wm5100_dapm_widgets_noirq[] = { |
| SND_SOC_DAPM_POST("Post", wm5100_post_ev), |
| }; |
| |
| static const struct snd_soc_dapm_route wm5100_dapm_routes[] = { |
| { "CP1", NULL, "CPVDD" }, |
| { "CP2 Active", NULL, "CPVDD" }, |
| |
| { "IN1L", NULL, "SYSCLK" }, |
| { "IN1R", NULL, "SYSCLK" }, |
| { "IN2L", NULL, "SYSCLK" }, |
| { "IN2R", NULL, "SYSCLK" }, |
| { "IN3L", NULL, "SYSCLK" }, |
| { "IN3R", NULL, "SYSCLK" }, |
| { "IN4L", NULL, "SYSCLK" }, |
| { "IN4R", NULL, "SYSCLK" }, |
| |
| { "OUT1L", NULL, "SYSCLK" }, |
| { "OUT1R", NULL, "SYSCLK" }, |
| { "OUT2L", NULL, "SYSCLK" }, |
| { "OUT2R", NULL, "SYSCLK" }, |
| { "OUT3L", NULL, "SYSCLK" }, |
| { "OUT3R", NULL, "SYSCLK" }, |
| { "OUT4L", NULL, "SYSCLK" }, |
| { "OUT4R", NULL, "SYSCLK" }, |
| { "OUT5L", NULL, "SYSCLK" }, |
| { "OUT5R", NULL, "SYSCLK" }, |
| { "OUT6L", NULL, "SYSCLK" }, |
| { "OUT6R", NULL, "SYSCLK" }, |
| |
| { "AIF1RX1", NULL, "SYSCLK" }, |
| { "AIF1RX2", NULL, "SYSCLK" }, |
| { "AIF1RX3", NULL, "SYSCLK" }, |
| { "AIF1RX4", NULL, "SYSCLK" }, |
| { "AIF1RX5", NULL, "SYSCLK" }, |
| { "AIF1RX6", NULL, "SYSCLK" }, |
| { "AIF1RX7", NULL, "SYSCLK" }, |
| { "AIF1RX8", NULL, "SYSCLK" }, |
| |
| { "AIF2RX1", NULL, "SYSCLK" }, |
| { "AIF2RX1", NULL, "DBVDD2" }, |
| { "AIF2RX2", NULL, "SYSCLK" }, |
| { "AIF2RX2", NULL, "DBVDD2" }, |
| |
| { "AIF3RX1", NULL, "SYSCLK" }, |
| { "AIF3RX1", NULL, "DBVDD3" }, |
| { "AIF3RX2", NULL, "SYSCLK" }, |
| { "AIF3RX2", NULL, "DBVDD3" }, |
| |
| { "AIF1TX1", NULL, "SYSCLK" }, |
| { "AIF1TX2", NULL, "SYSCLK" }, |
| { "AIF1TX3", NULL, "SYSCLK" }, |
| { "AIF1TX4", NULL, "SYSCLK" }, |
| { "AIF1TX5", NULL, "SYSCLK" }, |
| { "AIF1TX6", NULL, "SYSCLK" }, |
| { "AIF1TX7", NULL, "SYSCLK" }, |
| { "AIF1TX8", NULL, "SYSCLK" }, |
| |
| { "AIF2TX1", NULL, "SYSCLK" }, |
| { "AIF2TX1", NULL, "DBVDD2" }, |
| { "AIF2TX2", NULL, "SYSCLK" }, |
| { "AIF2TX2", NULL, "DBVDD2" }, |
| |
| { "AIF3TX1", NULL, "SYSCLK" }, |
| { "AIF3TX1", NULL, "DBVDD3" }, |
| { "AIF3TX2", NULL, "SYSCLK" }, |
| { "AIF3TX2", NULL, "DBVDD3" }, |
| |
| { "MICBIAS1", NULL, "CP2" }, |
| { "MICBIAS2", NULL, "CP2" }, |
| { "MICBIAS3", NULL, "CP2" }, |
| |
| { "IN1L PGA", NULL, "CP2" }, |
| { "IN1R PGA", NULL, "CP2" }, |
| { "IN2L PGA", NULL, "CP2" }, |
| { "IN2R PGA", NULL, "CP2" }, |
| { "IN3L PGA", NULL, "CP2" }, |
| { "IN3R PGA", NULL, "CP2" }, |
| { "IN4L PGA", NULL, "CP2" }, |
| { "IN4R PGA", NULL, "CP2" }, |
| |
| { "IN1L PGA", NULL, "CP2 Active" }, |
| { "IN1R PGA", NULL, "CP2 Active" }, |
| { "IN2L PGA", NULL, "CP2 Active" }, |
| { "IN2R PGA", NULL, "CP2 Active" }, |
| { "IN3L PGA", NULL, "CP2 Active" }, |
| { "IN3R PGA", NULL, "CP2 Active" }, |
| { "IN4L PGA", NULL, "CP2 Active" }, |
| { "IN4R PGA", NULL, "CP2 Active" }, |
| |
| { "OUT1L", NULL, "CP1" }, |
| { "OUT1R", NULL, "CP1" }, |
| { "OUT2L", NULL, "CP1" }, |
| { "OUT2R", NULL, "CP1" }, |
| { "OUT3L", NULL, "CP1" }, |
| { "OUT3R", NULL, "CP1" }, |
| |
| { "Tone Generator 1", NULL, "TONE" }, |
| { "Tone Generator 2", NULL, "TONE" }, |
| |
| { "IN1L PGA", NULL, "IN1L" }, |
| { "IN1R PGA", NULL, "IN1R" }, |
| { "IN2L PGA", NULL, "IN2L" }, |
| { "IN2R PGA", NULL, "IN2R" }, |
| { "IN3L PGA", NULL, "IN3L" }, |
| { "IN3R PGA", NULL, "IN3R" }, |
| { "IN4L PGA", NULL, "IN4L" }, |
| { "IN4R PGA", NULL, "IN4R" }, |
| |
| WM5100_MIXER_ROUTES("OUT1L", "HPOUT1L"), |
| WM5100_MIXER_ROUTES("OUT1R", "HPOUT1R"), |
| WM5100_MIXER_ROUTES("OUT2L", "HPOUT2L"), |
| WM5100_MIXER_ROUTES("OUT2R", "HPOUT2R"), |
| WM5100_MIXER_ROUTES("OUT3L", "HPOUT3L"), |
| WM5100_MIXER_ROUTES("OUT3R", "HPOUT3R"), |
| |
| WM5100_MIXER_ROUTES("OUT4L", "SPKOUTL"), |
| WM5100_MIXER_ROUTES("OUT4R", "SPKOUTR"), |
| WM5100_MIXER_ROUTES("OUT5L", "SPKDAT1L"), |
| WM5100_MIXER_ROUTES("OUT5R", "SPKDAT1R"), |
| WM5100_MIXER_ROUTES("OUT6L", "SPKDAT2L"), |
| WM5100_MIXER_ROUTES("OUT6R", "SPKDAT2R"), |
| |
| WM5100_MIXER_ROUTES("PWM1 Driver", "PWM1"), |
| WM5100_MIXER_ROUTES("PWM2 Driver", "PWM2"), |
| |
| WM5100_MIXER_ROUTES("AIF1TX1", "AIF1TX1"), |
| WM5100_MIXER_ROUTES("AIF1TX2", "AIF1TX2"), |
| WM5100_MIXER_ROUTES("AIF1TX3", "AIF1TX3"), |
| WM5100_MIXER_ROUTES("AIF1TX4", "AIF1TX4"), |
| WM5100_MIXER_ROUTES("AIF1TX5", "AIF1TX5"), |
| WM5100_MIXER_ROUTES("AIF1TX6", "AIF1TX6"), |
| WM5100_MIXER_ROUTES("AIF1TX7", "AIF1TX7"), |
| WM5100_MIXER_ROUTES("AIF1TX8", "AIF1TX8"), |
| |
| WM5100_MIXER_ROUTES("AIF2TX1", "AIF2TX1"), |
| WM5100_MIXER_ROUTES("AIF2TX2", "AIF2TX2"), |
| |
| WM5100_MIXER_ROUTES("AIF3TX1", "AIF3TX1"), |
| WM5100_MIXER_ROUTES("AIF3TX2", "AIF3TX2"), |
| |
| WM5100_MIXER_ROUTES("EQ1", "EQ1"), |
| WM5100_MIXER_ROUTES("EQ2", "EQ2"), |
| WM5100_MIXER_ROUTES("EQ3", "EQ3"), |
| WM5100_MIXER_ROUTES("EQ4", "EQ4"), |
| |
| WM5100_MIXER_ROUTES("DRC1L", "DRC1L"), |
| WM5100_MIXER_ROUTES("DRC1R", "DRC1R"), |
| |
| WM5100_MIXER_ROUTES("LHPF1", "LHPF1"), |
| WM5100_MIXER_ROUTES("LHPF2", "LHPF2"), |
| WM5100_MIXER_ROUTES("LHPF3", "LHPF3"), |
| WM5100_MIXER_ROUTES("LHPF4", "LHPF4"), |
| |
| { "HPOUT1L", NULL, "OUT1L" }, |
| { "HPOUT1R", NULL, "OUT1R" }, |
| { "HPOUT2L", NULL, "OUT2L" }, |
| { "HPOUT2R", NULL, "OUT2R" }, |
| { "HPOUT3L", NULL, "OUT3L" }, |
| { "HPOUT3R", NULL, "OUT3R" }, |
| { "SPKOUTL", NULL, "OUT4L" }, |
| { "SPKOUTR", NULL, "OUT4R" }, |
| { "SPKDAT1", NULL, "OUT5L" }, |
| { "SPKDAT1", NULL, "OUT5R" }, |
| { "SPKDAT2", NULL, "OUT6L" }, |
| { "SPKDAT2", NULL, "OUT6R" }, |
| { "PWM1", NULL, "PWM1 Driver" }, |
| { "PWM2", NULL, "PWM2 Driver" }, |
| }; |
| |
| static const struct reg_sequence wm5100_reva_patches[] = { |
| { WM5100_AUDIO_IF_1_10, 0 }, |
| { WM5100_AUDIO_IF_1_11, 1 }, |
| { WM5100_AUDIO_IF_1_12, 2 }, |
| { WM5100_AUDIO_IF_1_13, 3 }, |
| { WM5100_AUDIO_IF_1_14, 4 }, |
| { WM5100_AUDIO_IF_1_15, 5 }, |
| { WM5100_AUDIO_IF_1_16, 6 }, |
| { WM5100_AUDIO_IF_1_17, 7 }, |
| |
| { WM5100_AUDIO_IF_1_18, 0 }, |
| { WM5100_AUDIO_IF_1_19, 1 }, |
| { WM5100_AUDIO_IF_1_20, 2 }, |
| { WM5100_AUDIO_IF_1_21, 3 }, |
| { WM5100_AUDIO_IF_1_22, 4 }, |
| { WM5100_AUDIO_IF_1_23, 5 }, |
| { WM5100_AUDIO_IF_1_24, 6 }, |
| { WM5100_AUDIO_IF_1_25, 7 }, |
| |
| { WM5100_AUDIO_IF_2_10, 0 }, |
| { WM5100_AUDIO_IF_2_11, 1 }, |
| |
| { WM5100_AUDIO_IF_2_18, 0 }, |
| { WM5100_AUDIO_IF_2_19, 1 }, |
| |
| { WM5100_AUDIO_IF_3_10, 0 }, |
| { WM5100_AUDIO_IF_3_11, 1 }, |
| |
| { WM5100_AUDIO_IF_3_18, 0 }, |
| { WM5100_AUDIO_IF_3_19, 1 }, |
| }; |
| |
| static int wm5100_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) |
| { |
| struct snd_soc_component *component = dai->component; |
| int lrclk, bclk, mask, base; |
| |
| base = dai->driver->base; |
| |
| lrclk = 0; |
| bclk = 0; |
| |
| switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { |
| case SND_SOC_DAIFMT_DSP_A: |
| mask = 0; |
| break; |
| case SND_SOC_DAIFMT_I2S: |
| mask = 2; |
| break; |
| default: |
| dev_err(component->dev, "Unsupported DAI format %d\n", |
| fmt & SND_SOC_DAIFMT_FORMAT_MASK); |
| return -EINVAL; |
| } |
| |
| switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { |
| case SND_SOC_DAIFMT_CBS_CFS: |
| break; |
| case SND_SOC_DAIFMT_CBS_CFM: |
| lrclk |= WM5100_AIF1TX_LRCLK_MSTR; |
| break; |
| case SND_SOC_DAIFMT_CBM_CFS: |
| bclk |= WM5100_AIF1_BCLK_MSTR; |
| break; |
| case SND_SOC_DAIFMT_CBM_CFM: |
| lrclk |= WM5100_AIF1TX_LRCLK_MSTR; |
| bclk |= WM5100_AIF1_BCLK_MSTR; |
| break; |
| default: |
| dev_err(component->dev, "Unsupported master mode %d\n", |
| fmt & SND_SOC_DAIFMT_MASTER_MASK); |
| return -EINVAL; |
| } |
| |
| switch (fmt & SND_SOC_DAIFMT_INV_MASK) { |
| case SND_SOC_DAIFMT_NB_NF: |
| break; |
| case SND_SOC_DAIFMT_IB_IF: |
| bclk |= WM5100_AIF1_BCLK_INV; |
| lrclk |= WM5100_AIF1TX_LRCLK_INV; |
| break; |
| case SND_SOC_DAIFMT_IB_NF: |
| bclk |= WM5100_AIF1_BCLK_INV; |
| break; |
| case SND_SOC_DAIFMT_NB_IF: |
| lrclk |= WM5100_AIF1TX_LRCLK_INV; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| snd_soc_component_update_bits(component, base + 1, WM5100_AIF1_BCLK_MSTR | |
| WM5100_AIF1_BCLK_INV, bclk); |
| snd_soc_component_update_bits(component, base + 2, WM5100_AIF1TX_LRCLK_MSTR | |
| WM5100_AIF1TX_LRCLK_INV, lrclk); |
| snd_soc_component_update_bits(component, base + 3, WM5100_AIF1TX_LRCLK_MSTR | |
| WM5100_AIF1TX_LRCLK_INV, lrclk); |
| snd_soc_component_update_bits(component, base + 5, WM5100_AIF1_FMT_MASK, mask); |
| |
| return 0; |
| } |
| |
| #define WM5100_NUM_BCLK_RATES 19 |
| |
| static int wm5100_bclk_rates_dat[WM5100_NUM_BCLK_RATES] = { |
| 32000, |
| 48000, |
| 64000, |
| 96000, |
| 128000, |
| 192000, |
| 256000, |
| 384000, |
| 512000, |
| 768000, |
| 1024000, |
| 1536000, |
| 2048000, |
| 3072000, |
| 4096000, |
| 6144000, |
| 8192000, |
| 12288000, |
| 24576000, |
| }; |
| |
| static int wm5100_bclk_rates_cd[WM5100_NUM_BCLK_RATES] = { |
| 29400, |
| 44100, |
| 58800, |
| 88200, |
| 117600, |
| 176400, |
| 235200, |
| 352800, |
| 470400, |
| 705600, |
| 940800, |
| 1411200, |
| 1881600, |
| 2882400, |
| 3763200, |
| 5644800, |
| 7526400, |
| 11289600, |
| 22579600, |
| }; |
| |
| static int wm5100_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params, |
| struct snd_soc_dai *dai) |
| { |
| struct snd_soc_component *component = dai->component; |
| struct wm5100_priv *wm5100 = snd_soc_component_get_drvdata(component); |
| bool async = wm5100->aif_async[dai->id]; |
| int i, base, bclk, aif_rate, lrclk, wl, fl, sr; |
| int *bclk_rates; |
| |
| base = dai->driver->base; |
| |
| /* Data sizes if not using TDM */ |
| wl = params_width(params); |
| if (wl < 0) |
| return wl; |
| fl = snd_soc_params_to_frame_size(params); |
| if (fl < 0) |
| return fl; |
| |
| dev_dbg(component->dev, "Word length %d bits, frame length %d bits\n", |
| wl, fl); |
| |
| /* Target BCLK rate */ |
| bclk = snd_soc_params_to_bclk(params); |
| if (bclk < 0) |
| return bclk; |
| |
| /* Root for BCLK depends on SYS/ASYNCCLK */ |
| if (!async) { |
| aif_rate = wm5100->sysclk; |
| sr = wm5100_alloc_sr(component, params_rate(params)); |
| if (sr < 0) |
| return sr; |
| } else { |
| /* If we're in ASYNCCLK set the ASYNC sample rate */ |
| aif_rate = wm5100->asyncclk; |
| sr = 3; |
| |
| for (i = 0; i < ARRAY_SIZE(wm5100_sr_code); i++) |
| if (params_rate(params) == wm5100_sr_code[i]) |
| break; |
| if (i == ARRAY_SIZE(wm5100_sr_code)) { |
| dev_err(component->dev, "Invalid rate %dHzn", |
| params_rate(params)); |
| return -EINVAL; |
| } |
| |
| /* TODO: We should really check for symmetry */ |
| snd_soc_component_update_bits(component, WM5100_CLOCKING_8, |
| WM5100_ASYNC_SAMPLE_RATE_MASK, i); |
| } |
| |
| if (!aif_rate) { |
| dev_err(component->dev, "%s has no rate set\n", |
| async ? "ASYNCCLK" : "SYSCLK"); |
| return -EINVAL; |
| } |
| |
| dev_dbg(component->dev, "Target BCLK is %dHz, using %dHz %s\n", |
| bclk, aif_rate, async ? "ASYNCCLK" : "SYSCLK"); |
| |
| if (aif_rate % 4000) |
| bclk_rates = wm5100_bclk_rates_cd; |
| else |
| bclk_rates = wm5100_bclk_rates_dat; |
| |
| for (i = 0; i < WM5100_NUM_BCLK_RATES; i++) |
| if (bclk_rates[i] >= bclk && (bclk_rates[i] % bclk == 0)) |
| break; |
| if (i == WM5100_NUM_BCLK_RATES) { |
| dev_err(component->dev, |
| "No valid BCLK for %dHz found from %dHz %s\n", |
| bclk, aif_rate, async ? "ASYNCCLK" : "SYSCLK"); |
| return -EINVAL; |
| } |
| |
| bclk = i; |
| dev_dbg(component->dev, "Setting %dHz BCLK\n", bclk_rates[bclk]); |
| snd_soc_component_update_bits(component, base + 1, WM5100_AIF1_BCLK_FREQ_MASK, bclk); |
| |
| lrclk = bclk_rates[bclk] / params_rate(params); |
| dev_dbg(component->dev, "Setting %dHz LRCLK\n", bclk_rates[bclk] / lrclk); |
| if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK || |
| wm5100->aif_symmetric[dai->id]) |
| snd_soc_component_update_bits(component, base + 7, |
| WM5100_AIF1RX_BCPF_MASK, lrclk); |
| else |
| snd_soc_component_update_bits(component, base + 6, |
| WM5100_AIF1TX_BCPF_MASK, lrclk); |
| |
| i = (wl << WM5100_AIF1TX_WL_SHIFT) | fl; |
| if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) |
| snd_soc_component_update_bits(component, base + 9, |
| WM5100_AIF1RX_WL_MASK | |
| WM5100_AIF1RX_SLOT_LEN_MASK, i); |
| else |
| snd_soc_component_update_bits(component, base + 8, |
| WM5100_AIF1TX_WL_MASK | |
| WM5100_AIF1TX_SLOT_LEN_MASK, i); |
| |
| snd_soc_component_update_bits(component, base + 4, WM5100_AIF1_RATE_MASK, sr); |
| |
| return 0; |
| } |
| |
| static const struct snd_soc_dai_ops wm5100_dai_ops = { |
| .set_fmt = wm5100_set_fmt, |
| .hw_params = wm5100_hw_params, |
| }; |
| |
| static int wm5100_set_sysclk(struct snd_soc_component *component, int clk_id, |
| int source, unsigned int freq, int dir) |
| { |
| struct wm5100_priv *wm5100 = snd_soc_component_get_drvdata(component); |
| int *rate_store; |
| int fval, audio_rate, ret, reg; |
| |
| switch (clk_id) { |
| case WM5100_CLK_SYSCLK: |
| reg = WM5100_CLOCKING_3; |
| rate_store = &wm5100->sysclk; |
| break; |
| case WM5100_CLK_ASYNCCLK: |
| reg = WM5100_CLOCKING_7; |
| rate_store = &wm5100->asyncclk; |
| break; |
| case WM5100_CLK_32KHZ: |
| /* The 32kHz clock is slightly different to the others */ |
| switch (source) { |
| case WM5100_CLKSRC_MCLK1: |
| case WM5100_CLKSRC_MCLK2: |
| case WM5100_CLKSRC_SYSCLK: |
| snd_soc_component_update_bits(component, WM5100_CLOCKING_1, |
| WM5100_CLK_32K_SRC_MASK, |
| source); |
| break; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| |
| case WM5100_CLK_AIF1: |
| case WM5100_CLK_AIF2: |
| case WM5100_CLK_AIF3: |
| /* Not real clocks, record which clock domain they're in */ |
| switch (source) { |
| case WM5100_CLKSRC_SYSCLK: |
| wm5100->aif_async[clk_id - 1] = false; |
| break; |
| case WM5100_CLKSRC_ASYNCCLK: |
| wm5100->aif_async[clk_id - 1] = true; |
| break; |
| default: |
| dev_err(component->dev, "Invalid source %d\n", source); |
| return -EINVAL; |
| } |
| return 0; |
| |
| case WM5100_CLK_OPCLK: |
| switch (freq) { |
| case 5644800: |
| case 6144000: |
| snd_soc_component_update_bits(component, WM5100_MISC_GPIO_1, |
| WM5100_OPCLK_SEL_MASK, 0); |
| break; |
| case 11289600: |
| case 12288000: |
| snd_soc_component_update_bits(component, WM5100_MISC_GPIO_1, |
| WM5100_OPCLK_SEL_MASK, 0); |
| break; |
| case 22579200: |
| case 24576000: |
| snd_soc_component_update_bits(component, WM5100_MISC_GPIO_1, |
| WM5100_OPCLK_SEL_MASK, 0); |
| break; |
| default: |
| dev_err(component->dev, "Unsupported OPCLK %dHz\n", |
| freq); |
| return -EINVAL; |
| } |
| return 0; |
| |
| default: |
| dev_err(component->dev, "Unknown clock %d\n", clk_id); |
| return -EINVAL; |
| } |
| |
| switch (source) { |
| case WM5100_CLKSRC_SYSCLK: |
| case WM5100_CLKSRC_ASYNCCLK: |
| dev_err(component->dev, "Invalid source %d\n", source); |
| return -EINVAL; |
| } |
| |
| switch (freq) { |
| case 5644800: |
| case 6144000: |
| fval = 0; |
| break; |
| case 11289600: |
| case 12288000: |
| fval = 1; |
| break; |
| case 22579200: |
| case 24576000: |
| fval = 2; |
| break; |
| default: |
| dev_err(component->dev, "Invalid clock rate: %d\n", freq); |
| return -EINVAL; |
| } |
| |
| switch (freq) { |
| case 5644800: |
| case 11289600: |
| case 22579200: |
| audio_rate = 44100; |
| break; |
| |
| case 6144000: |
| case 12288000: |
| case 24576000: |
| audio_rate = 48000; |
| break; |
| |
| default: |
| BUG(); |
| audio_rate = 0; |
| break; |
| } |
| |
| /* TODO: Check if MCLKs are in use and enable/disable pulls to |
| * match. |
| */ |
| |
| snd_soc_component_update_bits(component, reg, WM5100_SYSCLK_FREQ_MASK | |
| WM5100_SYSCLK_SRC_MASK, |
| fval << WM5100_SYSCLK_FREQ_SHIFT | source); |
| |
| /* If this is SYSCLK then configure the clock rate for the |
| * internal audio functions to the natural sample rate for |
| * this clock rate. |
| */ |
| if (clk_id == WM5100_CLK_SYSCLK) { |
| dev_dbg(component->dev, "Setting primary audio rate to %dHz", |
| audio_rate); |
| if (0 && *rate_store) |
| wm5100_free_sr(component, audio_rate); |
| ret = wm5100_alloc_sr(component, audio_rate); |
| if (ret != 0) |
| dev_warn(component->dev, "Primary audio slot is %d\n", |
| ret); |
| } |
| |
| *rate_store = freq; |
| |
| return 0; |
| } |
| |
| struct _fll_div { |
| u16 fll_fratio; |
| u16 fll_outdiv; |
| u16 fll_refclk_div; |
| u16 n; |
| u16 theta; |
| u16 lambda; |
| }; |
| |
| static struct { |
| unsigned int min; |
| unsigned int max; |
| u16 fll_fratio; |
| int ratio; |
| } fll_fratios[] = { |
| { 0, 64000, 4, 16 }, |
| { 64000, 128000, 3, 8 }, |
| { 128000, 256000, 2, 4 }, |
| { 256000, 1000000, 1, 2 }, |
| { 1000000, 13500000, 0, 1 }, |
| }; |
| |
| static int fll_factors(struct _fll_div *fll_div, unsigned int Fref, |
| unsigned int Fout) |
| { |
| unsigned int target; |
| unsigned int div; |
| unsigned int fratio, gcd_fll; |
| int i; |
| |
| /* Fref must be <=13.5MHz */ |
| div = 1; |
| fll_div->fll_refclk_div = 0; |
| while ((Fref / div) > 13500000) { |
| div *= 2; |
| fll_div->fll_refclk_div++; |
| |
| if (div > 8) { |
| pr_err("Can't scale %dMHz input down to <=13.5MHz\n", |
| Fref); |
| return -EINVAL; |
| } |
| } |
| |
| pr_debug("FLL Fref=%u Fout=%u\n", Fref, Fout); |
| |
| /* Apply the division for our remaining calculations */ |
| Fref /= div; |
| |
| /* Fvco should be 90-100MHz; don't check the upper bound */ |
| div = 2; |
| while (Fout * div < 90000000) { |
| div++; |
| if (div > 64) { |
| pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n", |
| Fout); |
| return -EINVAL; |
| } |
| } |
| target = Fout * div; |
| fll_div->fll_outdiv = div - 1; |
| |
| pr_debug("FLL Fvco=%dHz\n", target); |
| |
| /* Find an appropraite FLL_FRATIO and factor it out of the target */ |
| for (i = 0; i < ARRAY_SIZE(fll_fratios); i++) { |
| if (fll_fratios[i].min <= Fref && Fref <= fll_fratios[i].max) { |
| fll_div->fll_fratio = fll_fratios[i].fll_fratio; |
| fratio = fll_fratios[i].ratio; |
| break; |
| } |
| } |
| if (i == ARRAY_SIZE(fll_fratios)) { |
| pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref); |
| return -EINVAL; |
| } |
| |
| fll_div->n = target / (fratio * Fref); |
| |
| if (target % Fref == 0) { |
| fll_div->theta = 0; |
| fll_div->lambda = 0; |
| } else { |
| gcd_fll = gcd(target, fratio * Fref); |
| |
| fll_div->theta = (target - (fll_div->n * fratio * Fref)) |
| / gcd_fll; |
| fll_div->lambda = (fratio * Fref) / gcd_fll; |
| } |
| |
| pr_debug("FLL N=%x THETA=%x LAMBDA=%x\n", |
| fll_div->n, fll_div->theta, fll_div->lambda); |
| pr_debug("FLL_FRATIO=%x(%d) FLL_OUTDIV=%x FLL_REFCLK_DIV=%x\n", |
| fll_div->fll_fratio, fratio, fll_div->fll_outdiv, |
| fll_div->fll_refclk_div); |
| |
| return 0; |
| } |
| |
| static int wm5100_set_fll(struct snd_soc_component *component, int fll_id, int source, |
| unsigned int Fref, unsigned int Fout) |
| { |
| struct i2c_client *i2c = to_i2c_client(component->dev); |
| struct wm5100_priv *wm5100 = snd_soc_component_get_drvdata(component); |
| struct _fll_div factors; |
| struct wm5100_fll *fll; |
| int ret, base, lock, i, timeout; |
| unsigned long time_left; |
| |
| switch (fll_id) { |
| case WM5100_FLL1: |
| fll = &wm5100->fll[0]; |
| base = WM5100_FLL1_CONTROL_1 - 1; |
| lock = WM5100_FLL1_LOCK_STS; |
| break; |
| case WM5100_FLL2: |
| fll = &wm5100->fll[1]; |
| base = WM5100_FLL2_CONTROL_2 - 1; |
| lock = WM5100_FLL2_LOCK_STS; |
| break; |
| default: |
| dev_err(component->dev, "Unknown FLL %d\n",fll_id); |
| return -EINVAL; |
| } |
| |
| if (!Fout) { |
| dev_dbg(component->dev, "FLL%d disabled", fll_id); |
| if (fll->fout) |
| pm_runtime_put(component->dev); |
| fll->fout = 0; |
| snd_soc_component_update_bits(component, base + 1, WM5100_FLL1_ENA, 0); |
| return 0; |
| } |
| |
| switch (source) { |
| case WM5100_FLL_SRC_MCLK1: |
| case WM5100_FLL_SRC_MCLK2: |
| case WM5100_FLL_SRC_FLL1: |
| case WM5100_FLL_SRC_FLL2: |
| case WM5100_FLL_SRC_AIF1BCLK: |
| case WM5100_FLL_SRC_AIF2BCLK: |
| case WM5100_FLL_SRC_AIF3BCLK: |
| break; |
| default: |
| dev_err(component->dev, "Invalid FLL source %d\n", source); |
| return -EINVAL; |
| } |
| |
| ret = fll_factors(&factors, Fref, Fout); |
| if (ret < 0) |
| return ret; |
| |
| /* Disable the FLL while we reconfigure */ |
| snd_soc_component_update_bits(component, base + 1, WM5100_FLL1_ENA, 0); |
| |
| snd_soc_component_update_bits(component, base + 2, |
| WM5100_FLL1_OUTDIV_MASK | WM5100_FLL1_FRATIO_MASK, |
| (factors.fll_outdiv << WM5100_FLL1_OUTDIV_SHIFT) | |
| factors.fll_fratio); |
| snd_soc_component_update_bits(component, base + 3, WM5100_FLL1_THETA_MASK, |
| factors.theta); |
| snd_soc_component_update_bits(component, base + 5, WM5100_FLL1_N_MASK, factors.n); |
| snd_soc_component_update_bits(component, base + 6, |
| WM5100_FLL1_REFCLK_DIV_MASK | |
| WM5100_FLL1_REFCLK_SRC_MASK, |
| (factors.fll_refclk_div |
| << WM5100_FLL1_REFCLK_DIV_SHIFT) | source); |
| snd_soc_component_update_bits(component, base + 7, WM5100_FLL1_LAMBDA_MASK, |
| factors.lambda); |
| |
| /* Clear any pending completions */ |
| try_wait_for_completion(&fll->lock); |
| |
| pm_runtime_get_sync(component->dev); |
| |
| snd_soc_component_update_bits(component, base + 1, WM5100_FLL1_ENA, WM5100_FLL1_ENA); |
| |
| if (i2c->irq) |
| timeout = 2; |
| else |
| timeout = 50; |
| |
| snd_soc_component_update_bits(component, WM5100_CLOCKING_3, WM5100_SYSCLK_ENA, |
| WM5100_SYSCLK_ENA); |
| |
| /* Poll for the lock; will use interrupt when we can test */ |
| for (i = 0; i < timeout; i++) { |
| if (i2c->irq) { |
| time_left = wait_for_completion_timeout(&fll->lock, |
| msecs_to_jiffies(25)); |
| if (time_left > 0) |
| break; |
| } else { |
| msleep(1); |
| } |
| |
| ret = snd_soc_component_read(component, |
| WM5100_INTERRUPT_RAW_STATUS_3); |
| if (ret < 0) { |
| dev_err(component->dev, |
| "Failed to read FLL status: %d\n", |
| ret); |
| continue; |
| } |
| if (ret & lock) |
| break; |
| } |
| if (i == timeout) { |
| dev_err(component->dev, "FLL%d lock timed out\n", fll_id); |
| pm_runtime_put(component->dev); |
| return -ETIMEDOUT; |
| } |
| |
| fll->src = source; |
| fll->fref = Fref; |
| fll->fout = Fout; |
| |
| dev_dbg(component->dev, "FLL%d running %dHz->%dHz\n", fll_id, |
| Fref, Fout); |
| |
| return 0; |
| } |
| |
| /* Actually go much higher */ |
| #define WM5100_RATES SNDRV_PCM_RATE_8000_192000 |
| |
| #define WM5100_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\ |
| SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) |
| |
| static struct snd_soc_dai_driver wm5100_dai[] = { |
| { |
| .name = "wm5100-aif1", |
| .base = WM5100_AUDIO_IF_1_1 - 1, |
| .playback = { |
| .stream_name = "AIF1 Playback", |
| .channels_min = 2, |
| .channels_max = 2, |
| .rates = WM5100_RATES, |
| .formats = WM5100_FORMATS, |
| }, |
| .capture = { |
| .stream_name = "AIF1 Capture", |
| .channels_min = 2, |
| .channels_max = 2, |
| .rates = WM5100_RATES, |
| .formats = WM5100_FORMATS, |
| }, |
| .ops = &wm5100_dai_ops, |
| }, |
| { |
| .name = "wm5100-aif2", |
| .id = 1, |
| .base = WM5100_AUDIO_IF_2_1 - 1, |
| .playback = { |
| .stream_name = "AIF2 Playback", |
| .channels_min = 2, |
| .channels_max = 2, |
| .rates = WM5100_RATES, |
| .formats = WM5100_FORMATS, |
| }, |
| .capture = { |
| .stream_name = "AIF2 Capture", |
| .channels_min = 2, |
| .channels_max = 2, |
| .rates = WM5100_RATES, |
| .formats = WM5100_FORMATS, |
| }, |
| .ops = &wm5100_dai_ops, |
| }, |
| { |
| .name = "wm5100-aif3", |
| .id = 2, |
| .base = WM5100_AUDIO_IF_3_1 - 1, |
| .playback = { |
| .stream_name = "AIF3 Playback", |
| .channels_min = 2, |
| .channels_max = 2, |
| .rates = WM5100_RATES, |
| .formats = WM5100_FORMATS, |
| }, |
| .capture = { |
| .stream_name = "AIF3 Capture", |
| .channels_min = 2, |
| .channels_max = 2, |
| .rates = WM5100_RATES, |
| .formats = WM5100_FORMATS, |
| }, |
| .ops = &wm5100_dai_ops, |
| }, |
| }; |
| |
| static int wm5100_dig_vu[] = { |
| WM5100_ADC_DIGITAL_VOLUME_1L, |
| WM5100_ADC_DIGITAL_VOLUME_1R, |
| WM5100_ADC_DIGITAL_VOLUME_2L, |
| WM5100_ADC_DIGITAL_VOLUME_2R, |
| WM5100_ADC_DIGITAL_VOLUME_3L, |
| WM5100_ADC_DIGITAL_VOLUME_3R, |
| WM5100_ADC_DIGITAL_VOLUME_4L, |
| WM5100_ADC_DIGITAL_VOLUME_4R, |
| |
| WM5100_DAC_DIGITAL_VOLUME_1L, |
| WM5100_DAC_DIGITAL_VOLUME_1R, |
| WM5100_DAC_DIGITAL_VOLUME_2L, |
| WM5100_DAC_DIGITAL_VOLUME_2R, |
| WM5100_DAC_DIGITAL_VOLUME_3L, |
| WM5100_DAC_DIGITAL_VOLUME_3R, |
| WM5100_DAC_DIGITAL_VOLUME_4L, |
| WM5100_DAC_DIGITAL_VOLUME_4R, |
| WM5100_DAC_DIGITAL_VOLUME_5L, |
| WM5100_DAC_DIGITAL_VOLUME_5R, |
| WM5100_DAC_DIGITAL_VOLUME_6L, |
| WM5100_DAC_DIGITAL_VOLUME_6R, |
| }; |
| |
| static void wm5100_set_detect_mode(struct wm5100_priv *wm5100, int the_mode) |
| { |
| struct wm5100_jack_mode *mode = &wm5100->pdata.jack_modes[the_mode]; |
| |
| if (WARN_ON(the_mode >= ARRAY_SIZE(wm5100->pdata.jack_modes))) |
| return; |
| |
| gpiod_set_value_cansleep(wm5100->hp_pol, mode->hp_pol); |
| regmap_update_bits(wm5100->regmap, WM5100_ACCESSORY_DETECT_MODE_1, |
| WM5100_ACCDET_BIAS_SRC_MASK | |
| WM5100_ACCDET_SRC, |
| (mode->bias << WM5100_ACCDET_BIAS_SRC_SHIFT) | |
| mode->micd_src << WM5100_ACCDET_SRC_SHIFT); |
| regmap_update_bits(wm5100->regmap, WM5100_MISC_CONTROL, |
| WM5100_HPCOM_SRC, |
| mode->micd_src << WM5100_HPCOM_SRC_SHIFT); |
| |
| wm5100->jack_mode = the_mode; |
| |
| dev_dbg(wm5100->dev, "Set microphone polarity to %d\n", |
| wm5100->jack_mode); |
| } |
| |
| static void wm5100_report_headphone(struct wm5100_priv *wm5100) |
| { |
| dev_dbg(wm5100->dev, "Headphone detected\n"); |
| wm5100->jack_detecting = false; |
| snd_soc_jack_report(wm5100->jack, SND_JACK_HEADPHONE, |
| SND_JACK_HEADPHONE); |
| |
| /* Increase the detection rate a bit for responsiveness. */ |
| regmap_update_bits(wm5100->regmap, WM5100_MIC_DETECT_1, |
| WM5100_ACCDET_RATE_MASK, |
| 7 << WM5100_ACCDET_RATE_SHIFT); |
| } |
| |
| static void wm5100_micd_irq(struct wm5100_priv *wm5100) |
| { |
| unsigned int val; |
| int ret; |
| |
| ret = regmap_read(wm5100->regmap, WM5100_MIC_DETECT_3, &val); |
| if (ret != 0) { |
| dev_err(wm5100->dev, "Failed to read microphone status: %d\n", |
| ret); |
| return; |
| } |
| |
| dev_dbg(wm5100->dev, "Microphone event: %x\n", val); |
| |
| if (!(val & WM5100_ACCDET_VALID)) { |
| dev_warn(wm5100->dev, "Microphone detection state invalid\n"); |
| return; |
| } |
| |
| /* No accessory, reset everything and report removal */ |
| if (!(val & WM5100_ACCDET_STS)) { |
| dev_dbg(wm5100->dev, "Jack removal detected\n"); |
| wm5100->jack_mic = false; |
| wm5100->jack_detecting = true; |
| wm5100->jack_flips = 0; |
| snd_soc_jack_report(wm5100->jack, 0, |
| SND_JACK_LINEOUT | SND_JACK_HEADSET | |
| SND_JACK_BTN_0); |
| |
| regmap_update_bits(wm5100->regmap, WM5100_MIC_DETECT_1, |
| WM5100_ACCDET_RATE_MASK, |
| WM5100_ACCDET_RATE_MASK); |
| return; |
| } |
| |
| /* If the measurement is very high we've got a microphone, |
| * either we just detected one or if we already reported then |
| * we've got a button release event. |
| */ |
| if (val & 0x400) { |
| if (wm5100->jack_detecting) { |
| dev_dbg(wm5100->dev, "Microphone detected\n"); |
| wm5100->jack_mic = true; |
| wm5100->jack_detecting = false; |
| snd_soc_jack_report(wm5100->jack, |
| SND_JACK_HEADSET, |
| SND_JACK_HEADSET | SND_JACK_BTN_0); |
| |
| /* Increase poll rate to give better responsiveness |
| * for buttons */ |
| regmap_update_bits(wm5100->regmap, WM5100_MIC_DETECT_1, |
| WM5100_ACCDET_RATE_MASK, |
| 5 << WM5100_ACCDET_RATE_SHIFT); |
| } else { |
| dev_dbg(wm5100->dev, "Mic button up\n"); |
| snd_soc_jack_report(wm5100->jack, 0, SND_JACK_BTN_0); |
| } |
| |
| return; |
| } |
| |
| /* If we detected a lower impedence during initial startup |
| * then we probably have the wrong polarity, flip it. Don't |
| * do this for the lowest impedences to speed up detection of |
| * plain headphones and give up if neither polarity looks |
| * sensible. |
| */ |
| if (wm5100->jack_detecting && (val & 0x3f8)) { |
| wm5100->jack_flips++; |
| |
| if (wm5100->jack_flips > 1) |
| wm5100_report_headphone(wm5100); |
| else |
| wm5100_set_detect_mode(wm5100, !wm5100->jack_mode); |
| |
| return; |
| } |
| |
| /* Don't distinguish between buttons, just report any low |
| * impedence as BTN_0. |
| */ |
| if (val & 0x3fc) { |
| if (wm5100->jack_mic) { |
| dev_dbg(wm5100->dev, "Mic button detected\n"); |
| snd_soc_jack_report(wm5100->jack, SND_JACK_BTN_0, |
| SND_JACK_BTN_0); |
| } else if (wm5100->jack_detecting) { |
| wm5100_report_headphone(wm5100); |
| } |
| } |
| } |
| |
| int wm5100_detect(struct snd_soc_component *component, struct snd_soc_jack *jack) |
| { |
| struct wm5100_priv *wm5100 = snd_soc_component_get_drvdata(component); |
| struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component); |
| |
| if (jack) { |
| wm5100->jack = jack; |
| wm5100->jack_detecting = true; |
| wm5100->jack_flips = 0; |
| |
| wm5100_set_detect_mode(wm5100, 0); |
| |
| /* Slowest detection rate, gives debounce for initial |
| * detection */ |
| snd_soc_component_update_bits(component, WM5100_MIC_DETECT_1, |
| WM5100_ACCDET_BIAS_STARTTIME_MASK | |
| WM5100_ACCDET_RATE_MASK, |
| (7 << WM5100_ACCDET_BIAS_STARTTIME_SHIFT) | |
| WM5100_ACCDET_RATE_MASK); |
| |
| /* We need the charge pump to power MICBIAS */ |
| snd_soc_dapm_mutex_lock(dapm); |
| |
| snd_soc_dapm_force_enable_pin_unlocked(dapm, "CP2"); |
| snd_soc_dapm_force_enable_pin_unlocked(dapm, "SYSCLK"); |
| |
| snd_soc_dapm_sync_unlocked(dapm); |
| |
| snd_soc_dapm_mutex_unlock(dapm); |
| |
| /* We start off just enabling microphone detection - even a |
| * plain headphone will trigger detection. |
| */ |
| snd_soc_component_update_bits(component, WM5100_MIC_DETECT_1, |
| WM5100_ACCDET_ENA, WM5100_ACCDET_ENA); |
| |
| snd_soc_component_update_bits(component, WM5100_INTERRUPT_STATUS_3_MASK, |
| WM5100_IM_ACCDET_EINT, 0); |
| } else { |
| snd_soc_component_update_bits(component, WM5100_INTERRUPT_STATUS_3_MASK, |
| WM5100_IM_HPDET_EINT | |
| WM5100_IM_ACCDET_EINT, |
| WM5100_IM_HPDET_EINT | |
| WM5100_IM_ACCDET_EINT); |
| snd_soc_component_update_bits(component, WM5100_MIC_DETECT_1, |
| WM5100_ACCDET_ENA, 0); |
| wm5100->jack = NULL; |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(wm5100_detect); |
| |
| static irqreturn_t wm5100_irq(int irq, void *data) |
| { |
| struct wm5100_priv *wm5100 = data; |
| irqreturn_t status = IRQ_NONE; |
| unsigned int irq_val, mask_val; |
| int ret; |
| |
| ret = regmap_read(wm5100->regmap, WM5100_INTERRUPT_STATUS_3, &irq_val); |
| if (ret < 0) { |
| dev_err(wm5100->dev, "Failed to read IRQ status 3: %d\n", |
| ret); |
| irq_val = 0; |
| } |
| |
| ret = regmap_read(wm5100->regmap, WM5100_INTERRUPT_STATUS_3_MASK, |
| &mask_val); |
| if (ret < 0) { |
| dev_err(wm5100->dev, "Failed to read IRQ mask 3: %d\n", |
| ret); |
| mask_val = 0xffff; |
| } |
| |
| irq_val &= ~mask_val; |
| |
| regmap_write(wm5100->regmap, WM5100_INTERRUPT_STATUS_3, irq_val); |
| |
| if (irq_val) |
| status = IRQ_HANDLED; |
| |
| wm5100_log_status3(wm5100, irq_val); |
| |
| if (irq_val & WM5100_FLL1_LOCK_EINT) { |
| dev_dbg(wm5100->dev, "FLL1 locked\n"); |
| complete(&wm5100->fll[0].lock); |
| } |
| if (irq_val & WM5100_FLL2_LOCK_EINT) { |
| dev_dbg(wm5100->dev, "FLL2 locked\n"); |
| complete(&wm5100->fll[1].lock); |
| } |
| |
| if (irq_val & WM5100_ACCDET_EINT) |
| wm5100_micd_irq(wm5100); |
| |
| ret = regmap_read(wm5100->regmap, WM5100_INTERRUPT_STATUS_4, &irq_val); |
| if (ret < 0) { |
| dev_err(wm5100->dev, "Failed to read IRQ status 4: %d\n", |
| ret); |
| irq_val = 0; |
| } |
| |
| ret = regmap_read(wm5100->regmap, WM5100_INTERRUPT_STATUS_4_MASK, |
| &mask_val); |
| if (ret < 0) { |
| dev_err(wm5100->dev, "Failed to read IRQ mask 4: %d\n", |
| ret); |
| mask_val = 0xffff; |
| } |
| |
| irq_val &= ~mask_val; |
| |
| if (irq_val) |
| status = IRQ_HANDLED; |
| |
| regmap_write(wm5100->regmap, WM5100_INTERRUPT_STATUS_4, irq_val); |
| |
| wm5100_log_status4(wm5100, irq_val); |
| |
| return status; |
| } |
| |
| static irqreturn_t wm5100_edge_irq(int irq, void *data) |
| { |
| irqreturn_t ret = IRQ_NONE; |
| irqreturn_t val; |
| |
| do { |
| val = wm5100_irq(irq, data); |
| if (val != IRQ_NONE) |
| ret = val; |
| } while (val != IRQ_NONE); |
| |
| return ret; |
| } |
| |
| #ifdef CONFIG_GPIOLIB |
| static void wm5100_gpio_set(struct gpio_chip *chip, unsigned offset, int value) |
| { |
| struct wm5100_priv *wm5100 = gpiochip_get_data(chip); |
| |
| regmap_update_bits(wm5100->regmap, WM5100_GPIO_CTRL_1 + offset, |
| WM5100_GP1_LVL, !!value << WM5100_GP1_LVL_SHIFT); |
| } |
| |
| static int wm5100_gpio_direction_out(struct gpio_chip *chip, |
| unsigned offset, int value) |
| { |
| struct wm5100_priv *wm5100 = gpiochip_get_data(chip); |
| int val, ret; |
| |
| val = (1 << WM5100_GP1_FN_SHIFT) | (!!value << WM5100_GP1_LVL_SHIFT); |
| |
| ret = regmap_update_bits(wm5100->regmap, WM5100_GPIO_CTRL_1 + offset, |
| WM5100_GP1_FN_MASK | WM5100_GP1_DIR | |
| WM5100_GP1_LVL, val); |
| if (ret < 0) |
| return ret; |
| else |
| return 0; |
| } |
| |
| static int wm5100_gpio_get(struct gpio_chip *chip, unsigned offset) |
| { |
| struct wm5100_priv *wm5100 = gpiochip_get_data(chip); |
| unsigned int reg; |
| int ret; |
| |
| ret = regmap_read(wm5100->regmap, WM5100_GPIO_CTRL_1 + offset, ®); |
| if (ret < 0) |
| return ret; |
| |
| return (reg & WM5100_GP1_LVL) != 0; |
| } |
| |
| static int wm5100_gpio_direction_in(struct gpio_chip *chip, unsigned offset) |
| { |
| struct wm5100_priv *wm5100 = gpiochip_get_data(chip); |
| |
| return regmap_update_bits(wm5100->regmap, WM5100_GPIO_CTRL_1 + offset, |
| WM5100_GP1_FN_MASK | WM5100_GP1_DIR, |
| (1 << WM5100_GP1_FN_SHIFT) | |
| (1 << WM5100_GP1_DIR_SHIFT)); |
| } |
| |
| static const struct gpio_chip wm5100_template_chip = { |
| .label = "wm5100", |
| .owner = THIS_MODULE, |
| .direction_output = wm5100_gpio_direction_out, |
| .set = wm5100_gpio_set, |
| .direction_input = wm5100_gpio_direction_in, |
| .get = wm5100_gpio_get, |
| .can_sleep = 1, |
| }; |
| |
| static void wm5100_init_gpio(struct i2c_client *i2c) |
| { |
| struct wm5100_priv *wm5100 = i2c_get_clientdata(i2c); |
| int ret; |
| |
| wm5100->gpio_chip = wm5100_template_chip; |
| wm5100->gpio_chip.ngpio = 6; |
| wm5100->gpio_chip.parent = &i2c->dev; |
| wm5100->gpio_chip.base = -1; |
| |
| ret = gpiochip_add_data(&wm5100->gpio_chip, wm5100); |
| if (ret != 0) |
| dev_err(&i2c->dev, "Failed to add GPIOs: %d\n", ret); |
| } |
| |
| static void wm5100_free_gpio(struct i2c_client *i2c) |
| { |
| struct wm5100_priv *wm5100 = i2c_get_clientdata(i2c); |
| |
| gpiochip_remove(&wm5100->gpio_chip); |
| } |
| #else |
| static void wm5100_init_gpio(struct i2c_client *i2c) |
| { |
| } |
| |
| static void wm5100_free_gpio(struct i2c_client *i2c) |
| { |
| } |
| #endif |
| |
| static int wm5100_probe(struct snd_soc_component *component) |
| { |
| struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component); |
| struct i2c_client *i2c = to_i2c_client(component->dev); |
| struct wm5100_priv *wm5100 = snd_soc_component_get_drvdata(component); |
| int ret, i; |
| |
| wm5100->component = component; |
| |
| for (i = 0; i < ARRAY_SIZE(wm5100_dig_vu); i++) |
| snd_soc_component_update_bits(component, wm5100_dig_vu[i], WM5100_OUT_VU, |
| WM5100_OUT_VU); |
| |
| /* Don't debounce interrupts to support use of SYSCLK only */ |
| snd_soc_component_write(component, WM5100_IRQ_DEBOUNCE_1, 0); |
| snd_soc_component_write(component, WM5100_IRQ_DEBOUNCE_2, 0); |
| |
| /* TODO: check if we're symmetric */ |
| |
| if (i2c->irq) |
| snd_soc_dapm_new_controls(dapm, wm5100_dapm_widgets_noirq, |
| ARRAY_SIZE(wm5100_dapm_widgets_noirq)); |
| |
| wm5100->hp_pol = devm_gpiod_get_optional(&i2c->dev, "hp-pol", |
| GPIOD_OUT_HIGH); |
| if (IS_ERR(wm5100->hp_pol)) { |
| ret = PTR_ERR(wm5100->hp_pol); |
| dev_err(&i2c->dev, "Failed to request HP_POL GPIO: %d\n", |
| ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static const struct snd_soc_component_driver soc_component_dev_wm5100 = { |
| .probe = wm5100_probe, |
| .set_sysclk = wm5100_set_sysclk, |
| .set_pll = wm5100_set_fll, |
| .seq_notifier = wm5100_seq_notifier, |
| .controls = wm5100_snd_controls, |
| .num_controls = ARRAY_SIZE(wm5100_snd_controls), |
| .dapm_widgets = wm5100_dapm_widgets, |
| .num_dapm_widgets = ARRAY_SIZE(wm5100_dapm_widgets), |
| .dapm_routes = wm5100_dapm_routes, |
| .num_dapm_routes = ARRAY_SIZE(wm5100_dapm_routes), |
| .use_pmdown_time = 1, |
| .endianness = 1, |
| }; |
| |
| static const struct regmap_config wm5100_regmap = { |
| .reg_bits = 16, |
| .val_bits = 16, |
| |
| .max_register = WM5100_MAX_REGISTER, |
| .reg_defaults = wm5100_reg_defaults, |
| .num_reg_defaults = ARRAY_SIZE(wm5100_reg_defaults), |
| .volatile_reg = wm5100_volatile_register, |
| .readable_reg = wm5100_readable_register, |
| .cache_type = REGCACHE_MAPLE, |
| }; |
| |
| static const unsigned int wm5100_mic_ctrl_reg[] = { |
| WM5100_IN1L_CONTROL, |
| WM5100_IN2L_CONTROL, |
| WM5100_IN3L_CONTROL, |
| WM5100_IN4L_CONTROL, |
| }; |
| |
| static int wm5100_i2c_probe(struct i2c_client *i2c) |
| { |
| struct wm5100_pdata *pdata = dev_get_platdata(&i2c->dev); |
| struct wm5100_priv *wm5100; |
| unsigned int reg; |
| int ret, i, irq_flags; |
| |
| wm5100 = devm_kzalloc(&i2c->dev, sizeof(struct wm5100_priv), |
| GFP_KERNEL); |
| if (wm5100 == NULL) |
| return -ENOMEM; |
| |
| wm5100->dev = &i2c->dev; |
| |
| wm5100->regmap = devm_regmap_init_i2c(i2c, &wm5100_regmap); |
| if (IS_ERR(wm5100->regmap)) { |
| ret = PTR_ERR(wm5100->regmap); |
| dev_err(&i2c->dev, "Failed to allocate register map: %d\n", |
| ret); |
| goto err; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(wm5100->fll); i++) |
| init_completion(&wm5100->fll[i].lock); |
| |
| if (pdata) |
| wm5100->pdata = *pdata; |
| |
| i2c_set_clientdata(i2c, wm5100); |
| |
| for (i = 0; i < ARRAY_SIZE(wm5100->core_supplies); i++) |
| wm5100->core_supplies[i].supply = wm5100_core_supply_names[i]; |
| |
| ret = devm_regulator_bulk_get(&i2c->dev, |
| ARRAY_SIZE(wm5100->core_supplies), |
| wm5100->core_supplies); |
| if (ret != 0) { |
| dev_err(&i2c->dev, "Failed to request core supplies: %d\n", |
| ret); |
| goto err; |
| } |
| |
| ret = regulator_bulk_enable(ARRAY_SIZE(wm5100->core_supplies), |
| wm5100->core_supplies); |
| if (ret != 0) { |
| dev_err(&i2c->dev, "Failed to enable core supplies: %d\n", |
| ret); |
| goto err; |
| } |
| |
| wm5100->ldo_ena = devm_gpiod_get_optional(&i2c->dev, "wlf,ldo1ena", |
| GPIOD_OUT_HIGH); |
| if (IS_ERR(wm5100->ldo_ena)) { |
| ret = PTR_ERR(wm5100->ldo_ena); |
| dev_err(&i2c->dev, "Failed to request LDOENA GPIO: %d\n", ret); |
| goto err_enable; |
| } |
| if (wm5100->ldo_ena) { |
| gpiod_set_consumer_name(wm5100->ldo_ena, "WM5100 LDOENA"); |
| msleep(2); |
| } |
| |
| wm5100->reset = devm_gpiod_get_optional(&i2c->dev, "reset", |
| GPIOD_OUT_LOW); |
| if (IS_ERR(wm5100->reset)) { |
| ret = PTR_ERR(wm5100->reset); |
| dev_err(&i2c->dev, "Failed to request /RESET GPIO: %d\n", ret); |
| goto err_ldo; |
| } |
| gpiod_set_consumer_name(wm5100->reset, "WM5100 /RESET"); |
| |
| ret = regmap_read(wm5100->regmap, WM5100_SOFTWARE_RESET, ®); |
| if (ret < 0) { |
| dev_err(&i2c->dev, "Failed to read ID register: %d\n", ret); |
| goto err_reset; |
| } |
| switch (reg) { |
| case 0x8997: |
| case 0x5100: |
| break; |
| |
| default: |
| dev_err(&i2c->dev, "Device is not a WM5100, ID is %x\n", reg); |
| ret = -EINVAL; |
| goto err_reset; |
| } |
| |
| ret = regmap_read(wm5100->regmap, WM5100_DEVICE_REVISION, ®); |
| if (ret < 0) { |
| dev_err(&i2c->dev, "Failed to read revision register\n"); |
| goto err_reset; |
| } |
| wm5100->rev = reg & WM5100_DEVICE_REVISION_MASK; |
| |
| dev_info(&i2c->dev, "revision %c\n", wm5100->rev + 'A'); |
| |
| ret = wm5100_reset(wm5100); |
| if (ret < 0) { |
| dev_err(&i2c->dev, "Failed to issue reset\n"); |
| goto err_reset; |
| } |
| |
| switch (wm5100->rev) { |
| case 0: |
| ret = regmap_register_patch(wm5100->regmap, |
| wm5100_reva_patches, |
| ARRAY_SIZE(wm5100_reva_patches)); |
| if (ret != 0) { |
| dev_err(&i2c->dev, "Failed to register patches: %d\n", |
| ret); |
| goto err_reset; |
| } |
| break; |
| default: |
| break; |
| } |
| |
| |
| wm5100_init_gpio(i2c); |
| |
| for (i = 0; i < ARRAY_SIZE(wm5100->pdata.gpio_defaults); i++) { |
| if (!wm5100->pdata.gpio_defaults[i]) |
| continue; |
| |
| regmap_write(wm5100->regmap, WM5100_GPIO_CTRL_1 + i, |
| wm5100->pdata.gpio_defaults[i]); |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(wm5100->pdata.in_mode); i++) { |
| regmap_update_bits(wm5100->regmap, wm5100_mic_ctrl_reg[i], |
| WM5100_IN1_MODE_MASK | |
| WM5100_IN1_DMIC_SUP_MASK, |
| (wm5100->pdata.in_mode[i] << |
| WM5100_IN1_MODE_SHIFT) | |
| (wm5100->pdata.dmic_sup[i] << |
| WM5100_IN1_DMIC_SUP_SHIFT)); |
| } |
| |
| if (i2c->irq) { |
| if (wm5100->pdata.irq_flags) |
| irq_flags = wm5100->pdata.irq_flags; |
| else |
| irq_flags = IRQF_TRIGGER_LOW; |
| |
| irq_flags |= IRQF_ONESHOT; |
| |
| if (irq_flags & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) |
| ret = request_threaded_irq(i2c->irq, NULL, |
| wm5100_edge_irq, irq_flags, |
| "wm5100", wm5100); |
| else |
| ret = request_threaded_irq(i2c->irq, NULL, wm5100_irq, |
| irq_flags, "wm5100", |
| wm5100); |
| |
| if (ret != 0) { |
| dev_err(&i2c->dev, "Failed to request IRQ %d: %d\n", |
| i2c->irq, ret); |
| } else { |
| /* Enable default interrupts */ |
| regmap_update_bits(wm5100->regmap, |
| WM5100_INTERRUPT_STATUS_3_MASK, |
| WM5100_IM_SPK_SHUTDOWN_WARN_EINT | |
| WM5100_IM_SPK_SHUTDOWN_EINT | |
| WM5100_IM_ASRC2_LOCK_EINT | |
| WM5100_IM_ASRC1_LOCK_EINT | |
| WM5100_IM_FLL2_LOCK_EINT | |
| WM5100_IM_FLL1_LOCK_EINT | |
| WM5100_CLKGEN_ERR_EINT | |
| WM5100_CLKGEN_ERR_ASYNC_EINT, 0); |
| |
| regmap_update_bits(wm5100->regmap, |
| WM5100_INTERRUPT_STATUS_4_MASK, |
| WM5100_AIF3_ERR_EINT | |
| WM5100_AIF2_ERR_EINT | |
| WM5100_AIF1_ERR_EINT | |
| WM5100_CTRLIF_ERR_EINT | |
| WM5100_ISRC2_UNDERCLOCKED_EINT | |
| WM5100_ISRC1_UNDERCLOCKED_EINT | |
| WM5100_FX_UNDERCLOCKED_EINT | |
| WM5100_AIF3_UNDERCLOCKED_EINT | |
| WM5100_AIF2_UNDERCLOCKED_EINT | |
| WM5100_AIF1_UNDERCLOCKED_EINT | |
| WM5100_ASRC_UNDERCLOCKED_EINT | |
| WM5100_DAC_UNDERCLOCKED_EINT | |
| WM5100_ADC_UNDERCLOCKED_EINT | |
| WM5100_MIXER_UNDERCLOCKED_EINT, 0); |
| } |
| } |
| |
| pm_runtime_set_active(&i2c->dev); |
| pm_runtime_enable(&i2c->dev); |
| pm_request_idle(&i2c->dev); |
| |
| ret = devm_snd_soc_register_component(&i2c->dev, |
| &soc_component_dev_wm5100, wm5100_dai, |
| ARRAY_SIZE(wm5100_dai)); |
| if (ret < 0) { |
| dev_err(&i2c->dev, "Failed to register WM5100: %d\n", ret); |
| goto err_reset; |
| } |
| |
| return ret; |
| |
| err_reset: |
| pm_runtime_disable(&i2c->dev); |
| if (i2c->irq) |
| free_irq(i2c->irq, wm5100); |
| wm5100_free_gpio(i2c); |
| gpiod_set_value_cansleep(wm5100->reset, 1); |
| err_ldo: |
| gpiod_set_value_cansleep(wm5100->ldo_ena, 0); |
| err_enable: |
| regulator_bulk_disable(ARRAY_SIZE(wm5100->core_supplies), |
| wm5100->core_supplies); |
| err: |
| return ret; |
| } |
| |
| static void wm5100_i2c_remove(struct i2c_client *i2c) |
| { |
| struct wm5100_priv *wm5100 = i2c_get_clientdata(i2c); |
| |
| pm_runtime_disable(&i2c->dev); |
| if (i2c->irq) |
| free_irq(i2c->irq, wm5100); |
| wm5100_free_gpio(i2c); |
| gpiod_set_value_cansleep(wm5100->reset, 1); |
| gpiod_set_value_cansleep(wm5100->ldo_ena, 0); |
| } |
| |
| #ifdef CONFIG_PM |
| static int wm5100_runtime_suspend(struct device *dev) |
| { |
| struct wm5100_priv *wm5100 = dev_get_drvdata(dev); |
| |
| regcache_cache_only(wm5100->regmap, true); |
| regcache_mark_dirty(wm5100->regmap); |
| gpiod_set_value_cansleep(wm5100->ldo_ena, 0); |
| regulator_bulk_disable(ARRAY_SIZE(wm5100->core_supplies), |
| wm5100->core_supplies); |
| |
| return 0; |
| } |
| |
| static int wm5100_runtime_resume(struct device *dev) |
| { |
| struct wm5100_priv *wm5100 = dev_get_drvdata(dev); |
| int ret; |
| |
| ret = regulator_bulk_enable(ARRAY_SIZE(wm5100->core_supplies), |
| wm5100->core_supplies); |
| if (ret != 0) { |
| dev_err(dev, "Failed to enable supplies: %d\n", |
| ret); |
| return ret; |
| } |
| |
| if (wm5100->ldo_ena) { |
| gpiod_set_value_cansleep(wm5100->ldo_ena, 1); |
| msleep(2); |
| } |
| |
| regcache_cache_only(wm5100->regmap, false); |
| regcache_sync(wm5100->regmap); |
| |
| return 0; |
| } |
| #endif |
| |
| static const struct dev_pm_ops wm5100_pm = { |
| SET_RUNTIME_PM_OPS(wm5100_runtime_suspend, wm5100_runtime_resume, |
| NULL) |
| }; |
| |
| static const struct i2c_device_id wm5100_i2c_id[] = { |
| { "wm5100" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, wm5100_i2c_id); |
| |
| static struct i2c_driver wm5100_i2c_driver = { |
| .driver = { |
| .name = "wm5100", |
| .pm = &wm5100_pm, |
| }, |
| .probe = wm5100_i2c_probe, |
| .remove = wm5100_i2c_remove, |
| .id_table = wm5100_i2c_id, |
| }; |
| |
| module_i2c_driver(wm5100_i2c_driver); |
| |
| MODULE_DESCRIPTION("ASoC WM5100 driver"); |
| MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); |
| MODULE_LICENSE("GPL"); |