| /* |
| * BSD LICENSE |
| * |
| * Copyright(c) 2017 Broadcom. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * * Neither the name of Broadcom Corporation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| |
| / { |
| compatible = "brcm,hr2"; |
| model = "Broadcom Hurricane 2 SoC"; |
| interrupt-parent = <&gic>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a9"; |
| next-level-cache = <&L2>; |
| reg = <0x0>; |
| }; |
| }; |
| |
| pmu { |
| compatible = "arm,cortex-a9-pmu"; |
| interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH |
| GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-affinity = <&cpu0>; |
| }; |
| |
| mpcore@19000000 { |
| compatible = "simple-bus"; |
| ranges = <0x00000000 0x19000000 0x00023000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| a9pll: arm_clk@0 { |
| #clock-cells = <0>; |
| compatible = "brcm,hr2-armpll"; |
| clocks = <&osc>; |
| reg = <0x0 0x1000>; |
| }; |
| |
| timer@20200 { |
| compatible = "arm,cortex-a9-global-timer"; |
| reg = <0x20200 0x100>; |
| interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>; |
| clocks = <&periph_clk>; |
| }; |
| |
| twd-timer@20600 { |
| compatible = "arm,cortex-a9-twd-timer"; |
| reg = <0x20600 0x20>; |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | |
| IRQ_TYPE_EDGE_RISING)>; |
| clocks = <&periph_clk>; |
| }; |
| |
| twd-watchdog@20620 { |
| compatible = "arm,cortex-a9-twd-wdt"; |
| reg = <0x20620 0x20>; |
| interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | |
| IRQ_TYPE_EDGE_RISING)>; |
| clocks = <&periph_clk>; |
| }; |
| |
| gic: interrupt-controller@21000 { |
| compatible = "arm,cortex-a9-gic"; |
| #interrupt-cells = <3>; |
| #address-cells = <0>; |
| interrupt-controller; |
| reg = <0x21000 0x1000>, |
| <0x20100 0x100>; |
| }; |
| |
| L2: cache-controller@22000 { |
| compatible = "arm,pl310-cache"; |
| reg = <0x22000 0x1000>; |
| cache-unified; |
| cache-level = <2>; |
| }; |
| }; |
| |
| clocks { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| osc: oscillator { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <25000000>; |
| }; |
| |
| periph_clk: periph_clk { |
| #clock-cells = <0>; |
| compatible = "fixed-factor-clock"; |
| clocks = <&a9pll>; |
| clock-div = <2>; |
| clock-mult = <1>; |
| }; |
| }; |
| |
| axi@18000000 { |
| compatible = "simple-bus"; |
| ranges = <0x00000000 0x18000000 0x0011c40c>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| uart0: serial@300 { |
| compatible = "ns16550a"; |
| reg = <0x0300 0x100>; |
| interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&osc>; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@400 { |
| compatible = "ns16550a"; |
| reg = <0x0400 0x100>; |
| interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&osc>; |
| status = "disabled"; |
| }; |
| |
| dma@20000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0x20000 0x1000>; |
| interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; |
| #dma-cells = <1>; |
| status = "disabled"; |
| }; |
| |
| amac0: ethernet@22000 { |
| compatible = "brcm,nsp-amac"; |
| reg = <0x22000 0x1000>, |
| <0x110000 0x1000>; |
| reg-names = "amac_base", "idm_base"; |
| interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| nand_controller: nand-controller@26000 { |
| compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; |
| reg = <0x26000 0x600>, |
| <0x11b408 0x600>, |
| <0x026f00 0x20>; |
| reg-names = "nand", "iproc-idm", "iproc-ext"; |
| interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| brcm,nand-has-wp; |
| }; |
| |
| gpiob: gpio@30000 { |
| compatible = "brcm,iproc-hr2-gpio", "brcm,iproc-gpio"; |
| reg = <0x30000 0x50>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| ngpios = <4>; |
| interrupt-controller; |
| interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| pwm: pwm@31000 { |
| compatible = "brcm,iproc-pwm"; |
| reg = <0x31000 0x28>; |
| clocks = <&osc>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| rng: rng@33000 { |
| compatible = "brcm,bcm-nsp-rng"; |
| reg = <0x33000 0x14>; |
| }; |
| |
| qspi: spi@27200 { |
| compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi"; |
| reg = <0x027200 0x184>, |
| <0x027000 0x124>, |
| <0x11c408 0x004>, |
| <0x0273a0 0x01c>; |
| reg-names = "mspi", "bspi", "intr_regs", |
| "intr_status_reg"; |
| interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "spi_lr_fullness_reached", |
| "spi_lr_session_aborted", |
| "spi_lr_impatient", |
| "spi_lr_session_done", |
| "spi_lr_overhead", |
| "mspi_done", |
| "mspi_halted"; |
| num-cs = <2>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| /* partitions defined in board DTS */ |
| }; |
| |
| ccbtimer0: timer@34000 { |
| compatible = "arm,sp804"; |
| reg = <0x34000 0x1000>; |
| interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| ccbtimer1: timer@35000 { |
| compatible = "arm,sp804"; |
| reg = <0x35000 0x1000>; |
| interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| i2c0: i2c@38000 { |
| compatible = "brcm,iproc-i2c"; |
| reg = <0x38000 0x50>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <100000>; |
| }; |
| |
| watchdog: watchdog@39000 { |
| compatible = "arm,sp805", "arm,primecell"; |
| reg = <0x39000 0x1000>; |
| interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| i2c1: i2c@3b000 { |
| compatible = "brcm,iproc-i2c"; |
| reg = <0x3b000 0x50>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <100000>; |
| }; |
| }; |
| |
| pflash: nor@20000000 { |
| compatible = "cfi-flash", "jedec-flash"; |
| reg = <0x20000000 0x04000000>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| /* partitions defined in board DTS */ |
| }; |
| |
| pcie0: pcie@18012000 { |
| compatible = "brcm,iproc-pcie"; |
| reg = <0x18012000 0x1000>; |
| |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 0>; |
| interrupt-map = <0 0 0 0 &gic GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; |
| |
| linux,pci-domain = <0>; |
| |
| bus-range = <0x00 0xff>; |
| |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| |
| /* Note: The HW does not support I/O resources. So, |
| * only the memory resource range is being specified. |
| */ |
| ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>; |
| |
| status = "disabled"; |
| |
| msi-parent = <&msi0>; |
| msi0: msi { |
| compatible = "brcm,iproc-msi"; |
| msi-controller; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; |
| brcm,pcie-msi-inten; |
| }; |
| }; |
| |
| pcie1: pcie@18013000 { |
| compatible = "brcm,iproc-pcie"; |
| reg = <0x18013000 0x1000>; |
| |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 0>; |
| interrupt-map = <0 0 0 0 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; |
| |
| linux,pci-domain = <1>; |
| |
| bus-range = <0x00 0xff>; |
| |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| |
| /* Note: The HW does not support I/O resources. So, |
| * only the memory resource range is being specified. |
| */ |
| ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>; |
| |
| status = "disabled"; |
| |
| msi-parent = <&msi1>; |
| msi1: msi { |
| compatible = "brcm,iproc-msi"; |
| msi-controller; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; |
| brcm,pcie-msi-inten; |
| }; |
| }; |
| }; |
