| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Hardware monitoring driver for Analog Devices ADM1275 Hot-Swap Controller |
| * and Digital Power Monitor |
| * |
| * Copyright (c) 2011 Ericsson AB. |
| * Copyright (c) 2018 Guenter Roeck |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/err.h> |
| #include <linux/slab.h> |
| #include <linux/i2c.h> |
| #include <linux/bitops.h> |
| #include <linux/bitfield.h> |
| #include <linux/log2.h> |
| #include "pmbus.h" |
| |
| enum chips { adm1075, adm1272, adm1275, adm1276, adm1278, adm1293, adm1294 }; |
| |
| #define ADM1275_MFR_STATUS_IOUT_WARN2 BIT(0) |
| #define ADM1293_MFR_STATUS_VAUX_UV_WARN BIT(5) |
| #define ADM1293_MFR_STATUS_VAUX_OV_WARN BIT(6) |
| |
| #define ADM1275_PEAK_IOUT 0xd0 |
| #define ADM1275_PEAK_VIN 0xd1 |
| #define ADM1275_PEAK_VOUT 0xd2 |
| #define ADM1275_PMON_CONFIG 0xd4 |
| |
| #define ADM1275_VIN_VOUT_SELECT BIT(6) |
| #define ADM1275_VRANGE BIT(5) |
| #define ADM1075_IRANGE_50 BIT(4) |
| #define ADM1075_IRANGE_25 BIT(3) |
| #define ADM1075_IRANGE_MASK (BIT(3) | BIT(4)) |
| |
| #define ADM1272_IRANGE BIT(0) |
| |
| #define ADM1278_TSFILT BIT(15) |
| #define ADM1278_TEMP1_EN BIT(3) |
| #define ADM1278_VIN_EN BIT(2) |
| #define ADM1278_VOUT_EN BIT(1) |
| |
| #define ADM1278_PMON_DEFCONFIG (ADM1278_VOUT_EN | ADM1278_TEMP1_EN | ADM1278_TSFILT) |
| |
| #define ADM1293_IRANGE_25 0 |
| #define ADM1293_IRANGE_50 BIT(6) |
| #define ADM1293_IRANGE_100 BIT(7) |
| #define ADM1293_IRANGE_200 (BIT(6) | BIT(7)) |
| #define ADM1293_IRANGE_MASK (BIT(6) | BIT(7)) |
| |
| #define ADM1293_VIN_SEL_012 BIT(2) |
| #define ADM1293_VIN_SEL_074 BIT(3) |
| #define ADM1293_VIN_SEL_210 (BIT(2) | BIT(3)) |
| #define ADM1293_VIN_SEL_MASK (BIT(2) | BIT(3)) |
| |
| #define ADM1293_VAUX_EN BIT(1) |
| |
| #define ADM1278_PEAK_TEMP 0xd7 |
| #define ADM1275_IOUT_WARN2_LIMIT 0xd7 |
| #define ADM1275_DEVICE_CONFIG 0xd8 |
| |
| #define ADM1275_IOUT_WARN2_SELECT BIT(4) |
| |
| #define ADM1276_PEAK_PIN 0xda |
| #define ADM1075_READ_VAUX 0xdd |
| #define ADM1075_VAUX_OV_WARN_LIMIT 0xde |
| #define ADM1075_VAUX_UV_WARN_LIMIT 0xdf |
| #define ADM1293_IOUT_MIN 0xe3 |
| #define ADM1293_PIN_MIN 0xe4 |
| #define ADM1075_VAUX_STATUS 0xf6 |
| |
| #define ADM1075_VAUX_OV_WARN BIT(7) |
| #define ADM1075_VAUX_UV_WARN BIT(6) |
| |
| #define ADM1275_VI_AVG_SHIFT 0 |
| #define ADM1275_VI_AVG_MASK GENMASK(ADM1275_VI_AVG_SHIFT + 2, \ |
| ADM1275_VI_AVG_SHIFT) |
| #define ADM1275_SAMPLES_AVG_MAX 128 |
| |
| #define ADM1278_PWR_AVG_SHIFT 11 |
| #define ADM1278_PWR_AVG_MASK GENMASK(ADM1278_PWR_AVG_SHIFT + 2, \ |
| ADM1278_PWR_AVG_SHIFT) |
| #define ADM1278_VI_AVG_SHIFT 8 |
| #define ADM1278_VI_AVG_MASK GENMASK(ADM1278_VI_AVG_SHIFT + 2, \ |
| ADM1278_VI_AVG_SHIFT) |
| |
| struct adm1275_data { |
| int id; |
| bool have_oc_fault; |
| bool have_uc_fault; |
| bool have_vout; |
| bool have_vaux_status; |
| bool have_mfr_vaux_status; |
| bool have_iout_min; |
| bool have_pin_min; |
| bool have_pin_max; |
| bool have_temp_max; |
| bool have_power_sampling; |
| struct pmbus_driver_info info; |
| }; |
| |
| #define to_adm1275_data(x) container_of(x, struct adm1275_data, info) |
| |
| struct coefficients { |
| s16 m; |
| s16 b; |
| s16 R; |
| }; |
| |
| static const struct coefficients adm1075_coefficients[] = { |
| [0] = { 27169, 0, -1 }, /* voltage */ |
| [1] = { 806, 20475, -1 }, /* current, irange25 */ |
| [2] = { 404, 20475, -1 }, /* current, irange50 */ |
| [3] = { 8549, 0, -1 }, /* power, irange25 */ |
| [4] = { 4279, 0, -1 }, /* power, irange50 */ |
| }; |
| |
| static const struct coefficients adm1272_coefficients[] = { |
| [0] = { 6770, 0, -2 }, /* voltage, vrange 60V */ |
| [1] = { 4062, 0, -2 }, /* voltage, vrange 100V */ |
| [2] = { 1326, 20480, -1 }, /* current, vsense range 15mV */ |
| [3] = { 663, 20480, -1 }, /* current, vsense range 30mV */ |
| [4] = { 3512, 0, -2 }, /* power, vrange 60V, irange 15mV */ |
| [5] = { 21071, 0, -3 }, /* power, vrange 100V, irange 15mV */ |
| [6] = { 17561, 0, -3 }, /* power, vrange 60V, irange 30mV */ |
| [7] = { 10535, 0, -3 }, /* power, vrange 100V, irange 30mV */ |
| [8] = { 42, 31871, -1 }, /* temperature */ |
| |
| }; |
| |
| static const struct coefficients adm1275_coefficients[] = { |
| [0] = { 19199, 0, -2 }, /* voltage, vrange set */ |
| [1] = { 6720, 0, -1 }, /* voltage, vrange not set */ |
| [2] = { 807, 20475, -1 }, /* current */ |
| }; |
| |
| static const struct coefficients adm1276_coefficients[] = { |
| [0] = { 19199, 0, -2 }, /* voltage, vrange set */ |
| [1] = { 6720, 0, -1 }, /* voltage, vrange not set */ |
| [2] = { 807, 20475, -1 }, /* current */ |
| [3] = { 6043, 0, -2 }, /* power, vrange set */ |
| [4] = { 2115, 0, -1 }, /* power, vrange not set */ |
| }; |
| |
| static const struct coefficients adm1278_coefficients[] = { |
| [0] = { 19599, 0, -2 }, /* voltage */ |
| [1] = { 800, 20475, -1 }, /* current */ |
| [2] = { 6123, 0, -2 }, /* power */ |
| [3] = { 42, 31880, -1 }, /* temperature */ |
| }; |
| |
| static const struct coefficients adm1293_coefficients[] = { |
| [0] = { 3333, -1, 0 }, /* voltage, vrange 1.2V */ |
| [1] = { 5552, -5, -1 }, /* voltage, vrange 7.4V */ |
| [2] = { 19604, -50, -2 }, /* voltage, vrange 21V */ |
| [3] = { 8000, -100, -2 }, /* current, irange25 */ |
| [4] = { 4000, -100, -2 }, /* current, irange50 */ |
| [5] = { 20000, -1000, -3 }, /* current, irange100 */ |
| [6] = { 10000, -1000, -3 }, /* current, irange200 */ |
| [7] = { 10417, 0, -1 }, /* power, 1.2V, irange25 */ |
| [8] = { 5208, 0, -1 }, /* power, 1.2V, irange50 */ |
| [9] = { 26042, 0, -2 }, /* power, 1.2V, irange100 */ |
| [10] = { 13021, 0, -2 }, /* power, 1.2V, irange200 */ |
| [11] = { 17351, 0, -2 }, /* power, 7.4V, irange25 */ |
| [12] = { 8676, 0, -2 }, /* power, 7.4V, irange50 */ |
| [13] = { 4338, 0, -2 }, /* power, 7.4V, irange100 */ |
| [14] = { 21689, 0, -3 }, /* power, 7.4V, irange200 */ |
| [15] = { 6126, 0, -2 }, /* power, 21V, irange25 */ |
| [16] = { 30631, 0, -3 }, /* power, 21V, irange50 */ |
| [17] = { 15316, 0, -3 }, /* power, 21V, irange100 */ |
| [18] = { 7658, 0, -3 }, /* power, 21V, irange200 */ |
| }; |
| |
| static int adm1275_read_pmon_config(const struct adm1275_data *data, |
| struct i2c_client *client, bool is_power) |
| { |
| int shift, ret; |
| u16 mask; |
| |
| /* |
| * The PMON configuration register is a 16-bit register only on chips |
| * supporting power average sampling. On other chips it is an 8-bit |
| * register. |
| */ |
| if (data->have_power_sampling) { |
| ret = i2c_smbus_read_word_data(client, ADM1275_PMON_CONFIG); |
| mask = is_power ? ADM1278_PWR_AVG_MASK : ADM1278_VI_AVG_MASK; |
| shift = is_power ? ADM1278_PWR_AVG_SHIFT : ADM1278_VI_AVG_SHIFT; |
| } else { |
| ret = i2c_smbus_read_byte_data(client, ADM1275_PMON_CONFIG); |
| mask = ADM1275_VI_AVG_MASK; |
| shift = ADM1275_VI_AVG_SHIFT; |
| } |
| if (ret < 0) |
| return ret; |
| |
| return (ret & mask) >> shift; |
| } |
| |
| static int adm1275_write_pmon_config(const struct adm1275_data *data, |
| struct i2c_client *client, |
| bool is_power, u16 word) |
| { |
| int shift, ret; |
| u16 mask; |
| |
| if (data->have_power_sampling) { |
| ret = i2c_smbus_read_word_data(client, ADM1275_PMON_CONFIG); |
| mask = is_power ? ADM1278_PWR_AVG_MASK : ADM1278_VI_AVG_MASK; |
| shift = is_power ? ADM1278_PWR_AVG_SHIFT : ADM1278_VI_AVG_SHIFT; |
| } else { |
| ret = i2c_smbus_read_byte_data(client, ADM1275_PMON_CONFIG); |
| mask = ADM1275_VI_AVG_MASK; |
| shift = ADM1275_VI_AVG_SHIFT; |
| } |
| if (ret < 0) |
| return ret; |
| |
| word = (ret & ~mask) | ((word << shift) & mask); |
| if (data->have_power_sampling) |
| ret = i2c_smbus_write_word_data(client, ADM1275_PMON_CONFIG, |
| word); |
| else |
| ret = i2c_smbus_write_byte_data(client, ADM1275_PMON_CONFIG, |
| word); |
| |
| return ret; |
| } |
| |
| static int adm1275_read_word_data(struct i2c_client *client, int page, |
| int phase, int reg) |
| { |
| const struct pmbus_driver_info *info = pmbus_get_driver_info(client); |
| const struct adm1275_data *data = to_adm1275_data(info); |
| int ret = 0; |
| |
| if (page > 0) |
| return -ENXIO; |
| |
| switch (reg) { |
| case PMBUS_IOUT_UC_FAULT_LIMIT: |
| if (!data->have_uc_fault) |
| return -ENXIO; |
| ret = pmbus_read_word_data(client, 0, 0xff, |
| ADM1275_IOUT_WARN2_LIMIT); |
| break; |
| case PMBUS_IOUT_OC_FAULT_LIMIT: |
| if (!data->have_oc_fault) |
| return -ENXIO; |
| ret = pmbus_read_word_data(client, 0, 0xff, |
| ADM1275_IOUT_WARN2_LIMIT); |
| break; |
| case PMBUS_VOUT_OV_WARN_LIMIT: |
| if (data->have_vout) |
| return -ENODATA; |
| ret = pmbus_read_word_data(client, 0, 0xff, |
| ADM1075_VAUX_OV_WARN_LIMIT); |
| break; |
| case PMBUS_VOUT_UV_WARN_LIMIT: |
| if (data->have_vout) |
| return -ENODATA; |
| ret = pmbus_read_word_data(client, 0, 0xff, |
| ADM1075_VAUX_UV_WARN_LIMIT); |
| break; |
| case PMBUS_READ_VOUT: |
| if (data->have_vout) |
| return -ENODATA; |
| ret = pmbus_read_word_data(client, 0, 0xff, |
| ADM1075_READ_VAUX); |
| break; |
| case PMBUS_VIRT_READ_IOUT_MIN: |
| if (!data->have_iout_min) |
| return -ENXIO; |
| ret = pmbus_read_word_data(client, 0, 0xff, |
| ADM1293_IOUT_MIN); |
| break; |
| case PMBUS_VIRT_READ_IOUT_MAX: |
| ret = pmbus_read_word_data(client, 0, 0xff, |
| ADM1275_PEAK_IOUT); |
| break; |
| case PMBUS_VIRT_READ_VOUT_MAX: |
| ret = pmbus_read_word_data(client, 0, 0xff, |
| ADM1275_PEAK_VOUT); |
| break; |
| case PMBUS_VIRT_READ_VIN_MAX: |
| ret = pmbus_read_word_data(client, 0, 0xff, |
| ADM1275_PEAK_VIN); |
| break; |
| case PMBUS_VIRT_READ_PIN_MIN: |
| if (!data->have_pin_min) |
| return -ENXIO; |
| ret = pmbus_read_word_data(client, 0, 0xff, |
| ADM1293_PIN_MIN); |
| break; |
| case PMBUS_VIRT_READ_PIN_MAX: |
| if (!data->have_pin_max) |
| return -ENXIO; |
| ret = pmbus_read_word_data(client, 0, 0xff, |
| ADM1276_PEAK_PIN); |
| break; |
| case PMBUS_VIRT_READ_TEMP_MAX: |
| if (!data->have_temp_max) |
| return -ENXIO; |
| ret = pmbus_read_word_data(client, 0, 0xff, |
| ADM1278_PEAK_TEMP); |
| break; |
| case PMBUS_VIRT_RESET_IOUT_HISTORY: |
| case PMBUS_VIRT_RESET_VOUT_HISTORY: |
| case PMBUS_VIRT_RESET_VIN_HISTORY: |
| break; |
| case PMBUS_VIRT_RESET_PIN_HISTORY: |
| if (!data->have_pin_max) |
| return -ENXIO; |
| break; |
| case PMBUS_VIRT_RESET_TEMP_HISTORY: |
| if (!data->have_temp_max) |
| return -ENXIO; |
| break; |
| case PMBUS_VIRT_POWER_SAMPLES: |
| if (!data->have_power_sampling) |
| return -ENXIO; |
| ret = adm1275_read_pmon_config(data, client, true); |
| if (ret < 0) |
| break; |
| ret = BIT(ret); |
| break; |
| case PMBUS_VIRT_IN_SAMPLES: |
| case PMBUS_VIRT_CURR_SAMPLES: |
| ret = adm1275_read_pmon_config(data, client, false); |
| if (ret < 0) |
| break; |
| ret = BIT(ret); |
| break; |
| default: |
| ret = -ENODATA; |
| break; |
| } |
| return ret; |
| } |
| |
| static int adm1275_write_word_data(struct i2c_client *client, int page, int reg, |
| u16 word) |
| { |
| const struct pmbus_driver_info *info = pmbus_get_driver_info(client); |
| const struct adm1275_data *data = to_adm1275_data(info); |
| int ret; |
| |
| if (page > 0) |
| return -ENXIO; |
| |
| switch (reg) { |
| case PMBUS_IOUT_UC_FAULT_LIMIT: |
| case PMBUS_IOUT_OC_FAULT_LIMIT: |
| ret = pmbus_write_word_data(client, 0, ADM1275_IOUT_WARN2_LIMIT, |
| word); |
| break; |
| case PMBUS_VIRT_RESET_IOUT_HISTORY: |
| ret = pmbus_write_word_data(client, 0, ADM1275_PEAK_IOUT, 0); |
| if (!ret && data->have_iout_min) |
| ret = pmbus_write_word_data(client, 0, |
| ADM1293_IOUT_MIN, 0); |
| break; |
| case PMBUS_VIRT_RESET_VOUT_HISTORY: |
| ret = pmbus_write_word_data(client, 0, ADM1275_PEAK_VOUT, 0); |
| break; |
| case PMBUS_VIRT_RESET_VIN_HISTORY: |
| ret = pmbus_write_word_data(client, 0, ADM1275_PEAK_VIN, 0); |
| break; |
| case PMBUS_VIRT_RESET_PIN_HISTORY: |
| ret = pmbus_write_word_data(client, 0, ADM1276_PEAK_PIN, 0); |
| if (!ret && data->have_pin_min) |
| ret = pmbus_write_word_data(client, 0, |
| ADM1293_PIN_MIN, 0); |
| break; |
| case PMBUS_VIRT_RESET_TEMP_HISTORY: |
| ret = pmbus_write_word_data(client, 0, ADM1278_PEAK_TEMP, 0); |
| break; |
| case PMBUS_VIRT_POWER_SAMPLES: |
| if (!data->have_power_sampling) |
| return -ENXIO; |
| word = clamp_val(word, 1, ADM1275_SAMPLES_AVG_MAX); |
| ret = adm1275_write_pmon_config(data, client, true, |
| ilog2(word)); |
| break; |
| case PMBUS_VIRT_IN_SAMPLES: |
| case PMBUS_VIRT_CURR_SAMPLES: |
| word = clamp_val(word, 1, ADM1275_SAMPLES_AVG_MAX); |
| ret = adm1275_write_pmon_config(data, client, false, |
| ilog2(word)); |
| break; |
| default: |
| ret = -ENODATA; |
| break; |
| } |
| return ret; |
| } |
| |
| static int adm1275_read_byte_data(struct i2c_client *client, int page, int reg) |
| { |
| const struct pmbus_driver_info *info = pmbus_get_driver_info(client); |
| const struct adm1275_data *data = to_adm1275_data(info); |
| int mfr_status, ret; |
| |
| if (page > 0) |
| return -ENXIO; |
| |
| switch (reg) { |
| case PMBUS_STATUS_IOUT: |
| ret = pmbus_read_byte_data(client, page, PMBUS_STATUS_IOUT); |
| if (ret < 0) |
| break; |
| if (!data->have_oc_fault && !data->have_uc_fault) |
| break; |
| mfr_status = pmbus_read_byte_data(client, page, |
| PMBUS_STATUS_MFR_SPECIFIC); |
| if (mfr_status < 0) |
| return mfr_status; |
| if (mfr_status & ADM1275_MFR_STATUS_IOUT_WARN2) { |
| ret |= data->have_oc_fault ? |
| PB_IOUT_OC_FAULT : PB_IOUT_UC_FAULT; |
| } |
| break; |
| case PMBUS_STATUS_VOUT: |
| if (data->have_vout) |
| return -ENODATA; |
| ret = 0; |
| if (data->have_vaux_status) { |
| mfr_status = pmbus_read_byte_data(client, 0, |
| ADM1075_VAUX_STATUS); |
| if (mfr_status < 0) |
| return mfr_status; |
| if (mfr_status & ADM1075_VAUX_OV_WARN) |
| ret |= PB_VOLTAGE_OV_WARNING; |
| if (mfr_status & ADM1075_VAUX_UV_WARN) |
| ret |= PB_VOLTAGE_UV_WARNING; |
| } else if (data->have_mfr_vaux_status) { |
| mfr_status = pmbus_read_byte_data(client, page, |
| PMBUS_STATUS_MFR_SPECIFIC); |
| if (mfr_status < 0) |
| return mfr_status; |
| if (mfr_status & ADM1293_MFR_STATUS_VAUX_OV_WARN) |
| ret |= PB_VOLTAGE_OV_WARNING; |
| if (mfr_status & ADM1293_MFR_STATUS_VAUX_UV_WARN) |
| ret |= PB_VOLTAGE_UV_WARNING; |
| } |
| break; |
| default: |
| ret = -ENODATA; |
| break; |
| } |
| return ret; |
| } |
| |
| static const struct i2c_device_id adm1275_id[] = { |
| { "adm1075", adm1075 }, |
| { "adm1272", adm1272 }, |
| { "adm1275", adm1275 }, |
| { "adm1276", adm1276 }, |
| { "adm1278", adm1278 }, |
| { "adm1293", adm1293 }, |
| { "adm1294", adm1294 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, adm1275_id); |
| |
| /* Enable VOUT & TEMP1 if not enabled (disabled by default) */ |
| static int adm1275_enable_vout_temp(struct i2c_client *client, int config) |
| { |
| int ret; |
| |
| if ((config & ADM1278_PMON_DEFCONFIG) != ADM1278_PMON_DEFCONFIG) { |
| config |= ADM1278_PMON_DEFCONFIG; |
| ret = i2c_smbus_write_word_data(client, ADM1275_PMON_CONFIG, config); |
| if (ret < 0) { |
| dev_err(&client->dev, "Failed to enable VOUT/TEMP1 monitoring\n"); |
| return ret; |
| } |
| } |
| return 0; |
| } |
| |
| static int adm1275_probe(struct i2c_client *client) |
| { |
| s32 (*config_read_fn)(const struct i2c_client *client, u8 reg); |
| u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1]; |
| int config, device_config; |
| int ret; |
| struct pmbus_driver_info *info; |
| struct adm1275_data *data; |
| const struct i2c_device_id *mid; |
| const struct coefficients *coefficients; |
| int vindex = -1, voindex = -1, cindex = -1, pindex = -1; |
| int tindex = -1; |
| u32 shunt; |
| u32 avg; |
| |
| if (!i2c_check_functionality(client->adapter, |
| I2C_FUNC_SMBUS_READ_BYTE_DATA |
| | I2C_FUNC_SMBUS_BLOCK_DATA)) |
| return -ENODEV; |
| |
| ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, block_buffer); |
| if (ret < 0) { |
| dev_err(&client->dev, "Failed to read Manufacturer ID\n"); |
| return ret; |
| } |
| if (ret != 3 || strncmp(block_buffer, "ADI", 3)) { |
| dev_err(&client->dev, "Unsupported Manufacturer ID\n"); |
| return -ENODEV; |
| } |
| |
| ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, block_buffer); |
| if (ret < 0) { |
| dev_err(&client->dev, "Failed to read Manufacturer Model\n"); |
| return ret; |
| } |
| for (mid = adm1275_id; mid->name[0]; mid++) { |
| if (!strncasecmp(mid->name, block_buffer, strlen(mid->name))) |
| break; |
| } |
| if (!mid->name[0]) { |
| dev_err(&client->dev, "Unsupported device\n"); |
| return -ENODEV; |
| } |
| |
| if (strcmp(client->name, mid->name) != 0) |
| dev_notice(&client->dev, |
| "Device mismatch: Configured %s, detected %s\n", |
| client->name, mid->name); |
| |
| if (mid->driver_data == adm1272 || mid->driver_data == adm1278 || |
| mid->driver_data == adm1293 || mid->driver_data == adm1294) |
| config_read_fn = i2c_smbus_read_word_data; |
| else |
| config_read_fn = i2c_smbus_read_byte_data; |
| config = config_read_fn(client, ADM1275_PMON_CONFIG); |
| if (config < 0) |
| return config; |
| |
| device_config = config_read_fn(client, ADM1275_DEVICE_CONFIG); |
| if (device_config < 0) |
| return device_config; |
| |
| data = devm_kzalloc(&client->dev, sizeof(struct adm1275_data), |
| GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| if (of_property_read_u32(client->dev.of_node, |
| "shunt-resistor-micro-ohms", &shunt)) |
| shunt = 1000; /* 1 mOhm if not set via DT */ |
| |
| if (shunt == 0) |
| return -EINVAL; |
| |
| data->id = mid->driver_data; |
| |
| info = &data->info; |
| |
| info->pages = 1; |
| info->format[PSC_VOLTAGE_IN] = direct; |
| info->format[PSC_VOLTAGE_OUT] = direct; |
| info->format[PSC_CURRENT_OUT] = direct; |
| info->format[PSC_POWER] = direct; |
| info->format[PSC_TEMPERATURE] = direct; |
| info->func[0] = PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | |
| PMBUS_HAVE_SAMPLES; |
| |
| info->read_word_data = adm1275_read_word_data; |
| info->read_byte_data = adm1275_read_byte_data; |
| info->write_word_data = adm1275_write_word_data; |
| |
| switch (data->id) { |
| case adm1075: |
| if (device_config & ADM1275_IOUT_WARN2_SELECT) |
| data->have_oc_fault = true; |
| else |
| data->have_uc_fault = true; |
| data->have_pin_max = true; |
| data->have_vaux_status = true; |
| |
| coefficients = adm1075_coefficients; |
| vindex = 0; |
| switch (config & ADM1075_IRANGE_MASK) { |
| case ADM1075_IRANGE_25: |
| cindex = 1; |
| pindex = 3; |
| break; |
| case ADM1075_IRANGE_50: |
| cindex = 2; |
| pindex = 4; |
| break; |
| default: |
| dev_err(&client->dev, "Invalid input current range"); |
| break; |
| } |
| |
| info->func[0] |= PMBUS_HAVE_VIN | PMBUS_HAVE_PIN |
| | PMBUS_HAVE_STATUS_INPUT; |
| if (config & ADM1275_VIN_VOUT_SELECT) |
| info->func[0] |= |
| PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT; |
| break; |
| case adm1272: |
| data->have_vout = true; |
| data->have_pin_max = true; |
| data->have_temp_max = true; |
| data->have_power_sampling = true; |
| |
| coefficients = adm1272_coefficients; |
| vindex = (config & ADM1275_VRANGE) ? 1 : 0; |
| cindex = (config & ADM1272_IRANGE) ? 3 : 2; |
| /* pindex depends on the combination of the above */ |
| switch (config & (ADM1275_VRANGE | ADM1272_IRANGE)) { |
| case 0: |
| default: |
| pindex = 4; |
| break; |
| case ADM1275_VRANGE: |
| pindex = 5; |
| break; |
| case ADM1272_IRANGE: |
| pindex = 6; |
| break; |
| case ADM1275_VRANGE | ADM1272_IRANGE: |
| pindex = 7; |
| break; |
| } |
| tindex = 8; |
| |
| info->func[0] |= PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT | |
| PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | |
| PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP; |
| |
| ret = adm1275_enable_vout_temp(client, config); |
| if (ret) |
| return ret; |
| |
| if (config & ADM1278_VIN_EN) |
| info->func[0] |= PMBUS_HAVE_VIN; |
| break; |
| case adm1275: |
| if (device_config & ADM1275_IOUT_WARN2_SELECT) |
| data->have_oc_fault = true; |
| else |
| data->have_uc_fault = true; |
| data->have_vout = true; |
| |
| coefficients = adm1275_coefficients; |
| vindex = (config & ADM1275_VRANGE) ? 0 : 1; |
| cindex = 2; |
| |
| if (config & ADM1275_VIN_VOUT_SELECT) |
| info->func[0] |= |
| PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT; |
| else |
| info->func[0] |= |
| PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT; |
| break; |
| case adm1276: |
| if (device_config & ADM1275_IOUT_WARN2_SELECT) |
| data->have_oc_fault = true; |
| else |
| data->have_uc_fault = true; |
| data->have_vout = true; |
| data->have_pin_max = true; |
| |
| coefficients = adm1276_coefficients; |
| vindex = (config & ADM1275_VRANGE) ? 0 : 1; |
| cindex = 2; |
| pindex = (config & ADM1275_VRANGE) ? 3 : 4; |
| |
| info->func[0] |= PMBUS_HAVE_VIN | PMBUS_HAVE_PIN |
| | PMBUS_HAVE_STATUS_INPUT; |
| if (config & ADM1275_VIN_VOUT_SELECT) |
| info->func[0] |= |
| PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT; |
| break; |
| case adm1278: |
| data->have_vout = true; |
| data->have_pin_max = true; |
| data->have_temp_max = true; |
| data->have_power_sampling = true; |
| |
| coefficients = adm1278_coefficients; |
| vindex = 0; |
| cindex = 1; |
| pindex = 2; |
| tindex = 3; |
| |
| info->func[0] |= PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT | |
| PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | |
| PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP; |
| |
| ret = adm1275_enable_vout_temp(client, config); |
| if (ret) |
| return ret; |
| |
| if (config & ADM1278_VIN_EN) |
| info->func[0] |= PMBUS_HAVE_VIN; |
| break; |
| case adm1293: |
| case adm1294: |
| data->have_iout_min = true; |
| data->have_pin_min = true; |
| data->have_pin_max = true; |
| data->have_mfr_vaux_status = true; |
| data->have_power_sampling = true; |
| |
| coefficients = adm1293_coefficients; |
| |
| voindex = 0; |
| switch (config & ADM1293_VIN_SEL_MASK) { |
| case ADM1293_VIN_SEL_012: /* 1.2V */ |
| vindex = 0; |
| break; |
| case ADM1293_VIN_SEL_074: /* 7.4V */ |
| vindex = 1; |
| break; |
| case ADM1293_VIN_SEL_210: /* 21V */ |
| vindex = 2; |
| break; |
| default: /* disabled */ |
| break; |
| } |
| |
| switch (config & ADM1293_IRANGE_MASK) { |
| case ADM1293_IRANGE_25: |
| cindex = 3; |
| break; |
| case ADM1293_IRANGE_50: |
| cindex = 4; |
| break; |
| case ADM1293_IRANGE_100: |
| cindex = 5; |
| break; |
| case ADM1293_IRANGE_200: |
| cindex = 6; |
| break; |
| } |
| |
| if (vindex >= 0) |
| pindex = 7 + vindex * 4 + (cindex - 3); |
| |
| if (config & ADM1293_VAUX_EN) |
| info->func[0] |= |
| PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT; |
| |
| info->func[0] |= PMBUS_HAVE_PIN | |
| PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT; |
| |
| break; |
| default: |
| dev_err(&client->dev, "Unsupported device\n"); |
| return -ENODEV; |
| } |
| |
| if (data->have_power_sampling && |
| of_property_read_u32(client->dev.of_node, |
| "adi,power-sample-average", &avg) == 0) { |
| if (!avg || avg > ADM1275_SAMPLES_AVG_MAX || |
| BIT(__fls(avg)) != avg) { |
| dev_err(&client->dev, |
| "Invalid number of power samples"); |
| return -EINVAL; |
| } |
| ret = adm1275_write_pmon_config(data, client, true, |
| ilog2(avg)); |
| if (ret < 0) { |
| dev_err(&client->dev, |
| "Setting power sample averaging failed with error %d", |
| ret); |
| return ret; |
| } |
| } |
| |
| if (of_property_read_u32(client->dev.of_node, |
| "adi,volt-curr-sample-average", &avg) == 0) { |
| if (!avg || avg > ADM1275_SAMPLES_AVG_MAX || |
| BIT(__fls(avg)) != avg) { |
| dev_err(&client->dev, |
| "Invalid number of voltage/current samples"); |
| return -EINVAL; |
| } |
| ret = adm1275_write_pmon_config(data, client, false, |
| ilog2(avg)); |
| if (ret < 0) { |
| dev_err(&client->dev, |
| "Setting voltage and current sample averaging failed with error %d", |
| ret); |
| return ret; |
| } |
| } |
| |
| if (voindex < 0) |
| voindex = vindex; |
| if (vindex >= 0) { |
| info->m[PSC_VOLTAGE_IN] = coefficients[vindex].m; |
| info->b[PSC_VOLTAGE_IN] = coefficients[vindex].b; |
| info->R[PSC_VOLTAGE_IN] = coefficients[vindex].R; |
| } |
| if (voindex >= 0) { |
| info->m[PSC_VOLTAGE_OUT] = coefficients[voindex].m; |
| info->b[PSC_VOLTAGE_OUT] = coefficients[voindex].b; |
| info->R[PSC_VOLTAGE_OUT] = coefficients[voindex].R; |
| } |
| if (cindex >= 0) { |
| /* Scale current with sense resistor value */ |
| info->m[PSC_CURRENT_OUT] = |
| coefficients[cindex].m * shunt / 1000; |
| info->b[PSC_CURRENT_OUT] = coefficients[cindex].b; |
| info->R[PSC_CURRENT_OUT] = coefficients[cindex].R; |
| } |
| if (pindex >= 0) { |
| info->m[PSC_POWER] = |
| coefficients[pindex].m * shunt / 1000; |
| info->b[PSC_POWER] = coefficients[pindex].b; |
| info->R[PSC_POWER] = coefficients[pindex].R; |
| } |
| if (tindex >= 0) { |
| info->m[PSC_TEMPERATURE] = coefficients[tindex].m; |
| info->b[PSC_TEMPERATURE] = coefficients[tindex].b; |
| info->R[PSC_TEMPERATURE] = coefficients[tindex].R; |
| } |
| |
| return pmbus_do_probe(client, info); |
| } |
| |
| static struct i2c_driver adm1275_driver = { |
| .driver = { |
| .name = "adm1275", |
| }, |
| .probe_new = adm1275_probe, |
| .id_table = adm1275_id, |
| }; |
| |
| module_i2c_driver(adm1275_driver); |
| |
| MODULE_AUTHOR("Guenter Roeck"); |
| MODULE_DESCRIPTION("PMBus driver for Analog Devices ADM1275 and compatibles"); |
| MODULE_LICENSE("GPL"); |
| MODULE_IMPORT_NS(PMBUS); |