| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * tsl4531.c - Support for TAOS TSL4531 ambient light sensor |
| * |
| * Copyright 2013 Peter Meerwald <pmeerw@pmeerw.net> |
| * |
| * IIO driver for the TSL4531x family |
| * TSL45311/TSL45313: 7-bit I2C slave address 0x39 |
| * TSL45315/TSL45317: 7-bit I2C slave address 0x29 |
| * |
| * TODO: single cycle measurement |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/i2c.h> |
| #include <linux/err.h> |
| #include <linux/delay.h> |
| |
| #include <linux/iio/iio.h> |
| #include <linux/iio/sysfs.h> |
| |
| #define TSL4531_DRV_NAME "tsl4531" |
| |
| #define TSL4531_COMMAND BIT(7) |
| |
| #define TSL4531_CONTROL (TSL4531_COMMAND | 0x00) |
| #define TSL4531_CONFIG (TSL4531_COMMAND | 0x01) |
| #define TSL4531_DATA (TSL4531_COMMAND | 0x04) |
| #define TSL4531_ID (TSL4531_COMMAND | 0x0a) |
| |
| /* operating modes in control register */ |
| #define TSL4531_MODE_POWERDOWN 0x00 |
| #define TSL4531_MODE_SINGLE_ADC 0x02 |
| #define TSL4531_MODE_NORMAL 0x03 |
| |
| /* integration time control in config register */ |
| #define TSL4531_TCNTRL_400MS 0x00 |
| #define TSL4531_TCNTRL_200MS 0x01 |
| #define TSL4531_TCNTRL_100MS 0x02 |
| |
| /* part number in id register */ |
| #define TSL45311_ID 0x8 |
| #define TSL45313_ID 0x9 |
| #define TSL45315_ID 0xa |
| #define TSL45317_ID 0xb |
| #define TSL4531_ID_SHIFT 4 |
| |
| struct tsl4531_data { |
| struct i2c_client *client; |
| struct mutex lock; |
| int int_time; |
| }; |
| |
| static IIO_CONST_ATTR_INT_TIME_AVAIL("0.1 0.2 0.4"); |
| |
| static struct attribute *tsl4531_attributes[] = { |
| &iio_const_attr_integration_time_available.dev_attr.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group tsl4531_attribute_group = { |
| .attrs = tsl4531_attributes, |
| }; |
| |
| static const struct iio_chan_spec tsl4531_channels[] = { |
| { |
| .type = IIO_LIGHT, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | |
| BIT(IIO_CHAN_INFO_SCALE) | |
| BIT(IIO_CHAN_INFO_INT_TIME) |
| } |
| }; |
| |
| static int tsl4531_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int *val, int *val2, long mask) |
| { |
| struct tsl4531_data *data = iio_priv(indio_dev); |
| int ret; |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_RAW: |
| ret = i2c_smbus_read_word_data(data->client, |
| TSL4531_DATA); |
| if (ret < 0) |
| return ret; |
| *val = ret; |
| return IIO_VAL_INT; |
| case IIO_CHAN_INFO_SCALE: |
| /* 0.. 1x, 1 .. 2x, 2 .. 4x */ |
| *val = 1 << data->int_time; |
| return IIO_VAL_INT; |
| case IIO_CHAN_INFO_INT_TIME: |
| if (data->int_time == 0) |
| *val2 = 400000; |
| else if (data->int_time == 1) |
| *val2 = 200000; |
| else if (data->int_time == 2) |
| *val2 = 100000; |
| else |
| return -EINVAL; |
| *val = 0; |
| return IIO_VAL_INT_PLUS_MICRO; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int tsl4531_write_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int val, int val2, long mask) |
| { |
| struct tsl4531_data *data = iio_priv(indio_dev); |
| int int_time, ret; |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_INT_TIME: |
| if (val != 0) |
| return -EINVAL; |
| if (val2 == 400000) |
| int_time = 0; |
| else if (val2 == 200000) |
| int_time = 1; |
| else if (val2 == 100000) |
| int_time = 2; |
| else |
| return -EINVAL; |
| mutex_lock(&data->lock); |
| ret = i2c_smbus_write_byte_data(data->client, |
| TSL4531_CONFIG, int_time); |
| if (ret >= 0) |
| data->int_time = int_time; |
| mutex_unlock(&data->lock); |
| return ret; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static const struct iio_info tsl4531_info = { |
| .read_raw = tsl4531_read_raw, |
| .write_raw = tsl4531_write_raw, |
| .attrs = &tsl4531_attribute_group, |
| }; |
| |
| static int tsl4531_check_id(struct i2c_client *client) |
| { |
| int ret = i2c_smbus_read_byte_data(client, TSL4531_ID); |
| if (ret < 0) |
| return ret; |
| |
| switch (ret >> TSL4531_ID_SHIFT) { |
| case TSL45311_ID: |
| case TSL45313_ID: |
| case TSL45315_ID: |
| case TSL45317_ID: |
| return 0; |
| default: |
| return -ENODEV; |
| } |
| } |
| |
| static int tsl4531_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct tsl4531_data *data; |
| struct iio_dev *indio_dev; |
| int ret; |
| |
| indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); |
| if (!indio_dev) |
| return -ENOMEM; |
| |
| data = iio_priv(indio_dev); |
| i2c_set_clientdata(client, indio_dev); |
| data->client = client; |
| mutex_init(&data->lock); |
| |
| ret = tsl4531_check_id(client); |
| if (ret) { |
| dev_err(&client->dev, "no TSL4531 sensor\n"); |
| return ret; |
| } |
| |
| ret = i2c_smbus_write_byte_data(data->client, TSL4531_CONTROL, |
| TSL4531_MODE_NORMAL); |
| if (ret < 0) |
| return ret; |
| |
| ret = i2c_smbus_write_byte_data(data->client, TSL4531_CONFIG, |
| TSL4531_TCNTRL_400MS); |
| if (ret < 0) |
| return ret; |
| |
| indio_dev->info = &tsl4531_info; |
| indio_dev->channels = tsl4531_channels; |
| indio_dev->num_channels = ARRAY_SIZE(tsl4531_channels); |
| indio_dev->name = TSL4531_DRV_NAME; |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| |
| return iio_device_register(indio_dev); |
| } |
| |
| static int tsl4531_powerdown(struct i2c_client *client) |
| { |
| return i2c_smbus_write_byte_data(client, TSL4531_CONTROL, |
| TSL4531_MODE_POWERDOWN); |
| } |
| |
| static void tsl4531_remove(struct i2c_client *client) |
| { |
| iio_device_unregister(i2c_get_clientdata(client)); |
| tsl4531_powerdown(client); |
| } |
| |
| static int tsl4531_suspend(struct device *dev) |
| { |
| return tsl4531_powerdown(to_i2c_client(dev)); |
| } |
| |
| static int tsl4531_resume(struct device *dev) |
| { |
| return i2c_smbus_write_byte_data(to_i2c_client(dev), TSL4531_CONTROL, |
| TSL4531_MODE_NORMAL); |
| } |
| |
| static DEFINE_SIMPLE_DEV_PM_OPS(tsl4531_pm_ops, tsl4531_suspend, |
| tsl4531_resume); |
| |
| static const struct i2c_device_id tsl4531_id[] = { |
| { "tsl4531", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, tsl4531_id); |
| |
| static struct i2c_driver tsl4531_driver = { |
| .driver = { |
| .name = TSL4531_DRV_NAME, |
| .pm = pm_sleep_ptr(&tsl4531_pm_ops), |
| }, |
| .probe = tsl4531_probe, |
| .remove = tsl4531_remove, |
| .id_table = tsl4531_id, |
| }; |
| |
| module_i2c_driver(tsl4531_driver); |
| |
| MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>"); |
| MODULE_DESCRIPTION("TAOS TSL4531 ambient light sensors driver"); |
| MODULE_LICENSE("GPL"); |